Quickie®

Product Presentation

Basics Portfolio

2 Product Presentation – Quickie®

Agenda

1. Value Proposition

2. Solution Overview

3. Products Overview

4. Product Specifications

5. Features & Benefits

6. Part Numbers

7. Markets & Applications

8. Marcomm Collaterals

3 Product Presentation – Quickie®

Quickie®

Value Proposition

Quickie® is the right and complete solution for cable to board connectors in 2.54mm pitch. Thanks to the plating performances guaranteed with 100 mating cycles as min is the right solution/alternative for flat cable-to-board connection. The Header with the four walled shielding is protects pins in unmated condition and prevents misalignment, thanks to the dual polarization it protects against mis match and the Duplex plating increase the cost effectiveness. The IDC Receptacles thanks to the Pre-Loaded adjustable bridge-type cover. It reduces assembly time, protects contacts and offers precise cover-to-base alignment ensuring an reliable termination.

4 Product Presentation – Quickie®

Quickie®

Shrouded Low Profile Headers (4 walls)

IDC Receptacles

Shrouded Eject Latch

Headers

IDC PCB Connector

Solution Overview

5 Product Presentation – Quickie®

Products Design Version Picture

Quickie Header

Shrouded Low Profile

(4 Walls)

Straight and Right Angle, TMT or PIP

Shrouded Eject Latch

Straight and Right Angle TMT or SMT

Quickie IDC Reptacles

With or without Strain

Relief

Latching Strain Relief

Quickie®

Products Overview

6 Product Presentation – Quickie®

Product Facts Specifications

Pitch 2.54mm Pin Count Dual row 6-64 pos Mating direction Vertical & right angle Current rate/contact Header 3A. Receptacle 1A Material (Cable Receptacle)

Housing Thermoplastic UL94V-0 Terminal Phosphor Bronze / Brass Alloy

Material (header) Housing Thermoplastic UL94V-0 Terminal Phosphor Bronze / Brass Alloy

Technical Documents Performance Characteristics

Tool Information

Manual flat cable cutter : HT209 Quickie assembly hand tool : HT 210

Product spec : BUS 12-082 BUS 12-095

Cable to board conectors with 2.54mm centerline Dual row 6 – 64 pos Four walled shielding protects pins unmated condition and prevents misalignment Long wiping action ensures good contact Unique lock and eject system minimizing space required and allowing dense packaging design According to european spec DIN 41651, HE10 and BT D2632

Current rating : up to 3A Insulation resistance : 1000 M ohm min Voltage rating 1000V Durability 100 cycles OT° Range : -65° to 105°

Quickie®

Solution Overview

7 Product Presentation – Quickie®

Features Benefits

Four-walled shielding It protects pins in unmated condition and prevents misalignment

Dual polarization by use of polarizations keys It protects against mis match

Side window It enables unique locking through latching system

Duplex plating

Cost efficient

According to DIN 41651 specification, HE10 and BT D2632

Qualified products well-known on the market

Quickie®

Features & Benefits - Header

8 Product Presentation – Quickie®

Features Benefits

Four-walled shielding It protects pins in unmated condition and prevents misalignment

Dual polarization by use of polarizations keys It protects against mismatch

Unique lock and eject system It minimizes PCB space required and allowing dense packaging design

Duplex plating

Cost efficient

According to DIN 41651 specification, HE10 and BT D2632

Qualified products well-known on the market

Quickie®

Features & Benefits - Header

9 Product Presentation – Quickie®

Features Benefits

Pre-Loaded adjustable bridge-type cover It reduces assembly time, protects contacts and offers precise cover-to-base alignment

ensuring an reliable termination

Long wiping action It ensures good contact

Comprehensive range of connector sizes It suits a wide range of cables

Duplex plating

Cost efficient

According to DIN 41651 specification, HE10 and BT D2632

Qualified products well-known on the market

Quickie®

Features & Benefits – IDC Receptacles

10 Product Presentation – Quickie®

Products Version Part Number

Header Shrouded Low Profile

(4 Walls)

Straight TMT 75869

Straight SMT 52601

Right Angle 75867

Header Shrouded Eject Latch

Straight 71918

Right Angle 71922

IDC Receptacles

With Strain Relief 71600

Without Strain Relief 71600

Latching Strain Relief 71600

IDC PCB Connector 69830

Quickie®

Part Numbers

11 Product Presentation – Quickie®

Data market

Communications market Industrial, Instrumentation & Medical

Quickie®

Main Markets & Applications

Consumer market

12 Product Presentation – Quickie®

Available on FCI.com Brochure

Technical Data Sheet

Quickie®

Marcomm Collaterals

13 Product Presentation – Quickie®

Available on FCI.com Product Specification

Part Numbers and Drawings

Quickie®

Marcomm Collaterals

THANK YOU