Upload
johnsondon
View
342
Download
0
Tags:
Embed Size (px)
Citation preview
G101/G231 Quick Start Guide
Note 1: Please do not plug WLAN card into CardBus port/MiniPCI slot of your computer until drive setup has completed.
Note 2: After driver installed, the PC within Win98SE OS shall be restarted, for Win2000 or WinXP OS the PC doesn’t need to restart.
Install Driver and Utility for Windows XP
Step 1: Insert the CD into the CD-ROM device and execute the
"setup.exe" program for your purchace G101/G231
series to select .
1
Step 2: The InstallShield Wizard box will appear, click "Next" to
continue.
Step 3:Licence Agreement ,Please choice “I accept the terms in
the license agreement” and click "Next" to continue.
2
Step 4: Click "Install" button to continue.
The driver and utility are Installing
3
Don’t care below message and click "Continue Anyway"
button to continue.
Click Finish to complete install procedure.
4
Step5:Insert the G101/G231 WLAN adapter into the PCMCIA
port/MiniPCI solt of your computer, the system will
automatically find the device and search for its software,
then click “Next” Button to continue.
Note: Please turn-off computer before you insert G101.
Please wait while the wizard installs the software.
5
Don’t care below message click "Continue Anyway"
button to continue.
Please wait while the wizard installs the software.
6
Complete device install.
7
Associating Wireless Device
Note: If you don’t disable the XP’s ‘Wireless Zero Configuration’, you can’t use the adapter’s utility. Please disable XP’s it and then use G101/G231’s utility.
SETP1:If you don’t disable the XP’s ‘Wireless Zero Configuration’, you can not use function of the adapter’s utility.
Clicking on the utility icon.
Click “Yes”,then Radio ON
8
You can’t use function of the adapter’s utility as below.
9
Useless
Useless
SETP2. Disable the XP’s ‘Wireless Zero Configuration’ and use “TwinMOS Wireless LAN Configuration Utility”
Double-click the icon marked in red in the taskbar and
you may start using the Windows XP’s ‘Wireless Zero
Configuration’.
Get into Windows XP’s utility, click "Advanced" button.
10
In “Wireless Network Connection Properties“ screen,
uncheck the setting “Use Windows to configure my
wireless network settings“. Note that if you want to
change back to the Windows XP built-in utility, check
the item again.
11
Clicking on the utility icon will start the configuration
utility.
12
Useful
Useful
Using WPA of the Windows XP’s Utility
Note1: Before use the WPA feature, please install Windows XP Service Pack 1 with Windows XP support patch for Wi-Fi Protected Access program
Note2: Configure the card by wireless built-in utility (Wireless Zero Configuration).
Note3: All devices in the network should use the same encryption method to ensure the communication.
Wi-Fi Protected Access (WPA) is a specification of
standards-based, interoperable security enhancements
that strongly increase the level of data protection
(encryption) and access control (authentication) for
existing and future wireless LAN systems. The technical
components of WPA include Temporal Key Integrity
Protocol (TKIP) for dynamic key exchange, and 802.1x
for authentication.
Example :
13
Step 1: right click the icon to select “View Available Wireless Networks”.
Step 2:Click “Advanced” button from “Wireless Network Connection”.
14
Step3:Click “Configure” button to configure the WPA function for the current network.
15
Network Authentication
‧Open – No authentication is needed among the wireless
network.
‧Shared – Only wireless stations using a shared key (WEP
Key identified) are allowed to connecting each
other.
‧WPA – This mode is for enterprise with an authentication
server (Radius Server), WPA-enabled access
point, and a WPA-enabled client. Once WPA is
enabled, all clients and access points on the
network must be WPA-enabled in order to
access the network.
‧WPA-PSK – It is a special mode designed for home and
small business users who do not have
access to network authentication servers. In
this mode, known as Pre-Shared Key, the
user manually enters the starting password
in their access point or gateway, as well as in
each PC on the wireless network. WPA takes
over automatically from that point, keeping
unauthorized users that don't have the
matching password from joining the network,
while encrypting the data traveling between
authorized devices.
16
Data Encryption
‧WEP – In WPA or WPA-PSK mode, WEP is also able to be
the encryption method for the transmission data.
‧TKIP – TKIP (Temporal Key Integrity Protocol) changes
the temporal key every 10,000 packets (a packet
is a kind of message transmitted over a
network.) This insures much greater security
than the standard WEP security.
‧AES – AES has been developed to ensure the highest
degree of security and authenticity for digital
information and it is the most advanced solution
defined by IEEE 802.11i for the security in the
wireless network.
17
Install Driver and Utility for Windows 2000
Step 1: Insert the CD into the CD-ROM device and execute the
"setup.exe" program for your purchace G101/G231
series to select .
Step 2: The InstallShield Wizard box will appear, click "Next" to
continue.
18
Step 3: Licence Agreement ,Please choice “I accept the terms
in the license agreement” and click "Next" to continue.
Step4: Click "Install" button to continue.
19
The driver and utility are Installing.
Click Finish to complete install procedure.
20
Step 5: Insert the G101/G231 WLAN adapter into the PCMCIA
port/MiniPCI slot of your computer, the system will
automatically find the device and search for its
software then the InstallShield Wizard finished
installation and the system tray icon is loaded in the
taskbar (see illustration below).
Note: Please turn-off computer before you insert G101.
Found New Hardware and Installing.
Complete device install.
21
Step 6:Please click “Start-> programs->TwinMOS ->G101_G231
WLAN Configuration Utility”.
The TM icon will appear in tray bar.
The “TwinMOS WLAN Configuration Utility” screen will
appear.
22
Install Driver and Utility for Windows 98SE
Step 1: Insert the CD into the CD-ROM device and execute the
"setup.exe" program for your purchace G101/G231
series to select .
Step 2:The InstallShield Wizard box will appear, click "Next" to
continue.
23
Step 3: Licence Agreement ,Please choice “I accept the terms
in the license agreement” and click "Next" to continue.
Step 4: Click "Install" button to continue.
24
The driver and utility are Installing.
Click Finish to complete install procedure.
25
Step 5: After running the driver package, the Notebook (or PC)
with Win98 OS shall be restarted
Step 6: Insert the G101/G231 WLAN adapter into the MiniPCI
slot/PCMCIA port of your computer, the system will
automatically find the device and search for its
software then the InstallShield Wizard finished
installation and the system tray icon is loaded in the
taskbar (see illustration below).
Note: Please turn-off computer before you insert G101.
New Hardware Found
26
Step 7: Please insert the disk labeled "Windows 98 Second
Edition CD-ROM."
Step 8: Choose Windows 98SE folder
27
Step 9: Copying Files
Step10:Please click “Start-> programs->TwinMOS -
>G101_G231 WLAN Configuration Utility”.
28
The TM icon will appear in tray bar..
The “TwinMOS WLAN Configuration Utility” screen will
appear.
29
Utility Usage for G101/G231 WLAN AdapterStep 1 Please click “All programs->TwinMOS->G101_G231 WLAN
Configuration Utility”. Or to double-click on the icon shown
below. The “TwinMOS WLAN Configuration” screen will appear.
Or to double click the icon
The “TwinMOS WLAN Configuration Utility” screen will appear.
30
Step 2: This screen shows all Access Points or Adapters
nearby when operating in Infrastructure. Click
“Rescan” button to collect the SSID and Strength
information of all the wireless devices nearby. If you
want to connect to any device on the list, double-
click the item on the list, and the adapter will
automatically connect to the selected device.
31
Install Driver and Utility for Linux
NOTE 1: Before driver install, Please make sure below. System Environment:
Linux kernel 2.4
Wireless tool 16.
NOTE 2: Feature list:1. Full compliance with IEEE 802.11g standard
2. Support short preamble
3. Support RTS/CTS mechanism
4. Support de-fragmentation at receiving
5. Auto channel selection at system startup
6. Support static WEP keys of 64 and 128 bits
Known issues:1. Multicast Test is not supported.
2. Power save has not been implemented yet.
3. Data payload has not been tested yet.
4. Support for big-endian platform has not been implemented.
The Station Driver provides IEEE 802.11b/g station functionality.
This document covers its available I/O control commands on
Linux platform.
32
To describe I/O control command support by TwinMOS
G101/G231 Station on Linux platform. This can be a user
interface developer’s reference to provide users a WEB or
command-line based control environment.
33
1. Installation steps:Step 1: Execute "insmod –f IPN2220STA.o "
at the directory where the IPN2220STA.o is located.
By default, the STA will find a non-WEP AP with the
most powerful signal strength to join.
Step 2: Execute "./iwconfig"
to display connection status
Step 3: Execute "ifconfig wlan0 192.168.xxx.xxx"
to assign an IP to STA. Notice that “wlan0” is the
device name of our STA.
After step 3, the connection is established.
2. Network related setting: Item 1: To change the MAC address of IPN2220 station,
execute
“./ifconfig wlan0 hw ether xxxxxxxxxxxx”
(xxxxxxxxxxxx denotes the new MAC address you want
to set)
before you specify an IP address to the IPN2220 station.
Item 2: To perform site survey,
execute
"./iwlist wlan0 scanning"
to scan all channels and display the scan results.
Notice that the wireless-extension version should be at
least 15 for iwlist/iwconfig utilities to execute this
command.
Item 3: To join a different BSS,
execute
"./iwconfig wlan0 essid XXX" (XXX denotes the essid of
AP you want to join)
Item 4: To specify the channel of the ad-hoc network
you want to create,
execute,
34
“./iwconfig wlan0 channel N” (N denotes the channel of
the ad-hoc network you want to create, from 1 to 11)
Item 5: To change from infrastructure mode to ad-hoc
mode,
execute
"./iwconfig wlan0 mode ad-hoc"
then execute
"./iwconfig wlan0 essid XXX" (XXX means the essid you
want to set/join to the IBSS network)
Item 6: To change from ad-hoc mode to infrastructure
mode,
execute
"iwconfig wlan0 mode managed"
then execute
"./iwconfig wlan0 essid XXX" (XXX means the essid of
AP you want to join)
Item 7: To join different BSS,
execute
"./iwconfig wlan0 essid XXX" (XXX means the essid of
AP you want to join)
3. Network related setting: To enable WEP or change WEP key, please refer to the
instructions below:
(1) To set WEP key to key set $i, enable WEP and use
key set $i as WEP key, the command is "./iwconfig
wlan0 key xxxxxxxxxx [$i]" ,(xxxxxxxxxx denotes
WEP key)($i:1~4)
(2) If you execute "./iwconfig wlan0 key xxxxxxxxxx" ,
(xxxxxxxxxx denotes the WEP key) without
specifying the key ID "[$i]", then the default WEP key
ID will be 1.
(3) To disable WEP at any time, the command is
"./iwconfig wlan0 key off".
35
(4) To enable WEP that you have set before via (1) or (2)
or (3), the command is "./iwconfig wlan0 key on".
(5)To enable WEP and use key set $i as WEP key.($i can
be 1~4) that you have set before via (1) or (2) or (3),
the command is "./iwconfig wlan0 key [$i]"
If you want to join a BSS with different WEP key setting,
execute the following two command.
(1) "./iwconfig wlan0 key xxxxxxxxxx", (xxxxxxxxxx
denotes WEP key)
(2) "./iwconfig wlan0 essid XXX", (XXX denotes the
essid of AP you want to join)
(3) Notice, the executing sequence is unrelated in
infrastructure mode. But in ad-hoc mode, you must
execute (1) first or you will create an ad-hoc network
with the same SSID but different WEP setting.
4. Remove step: To turn off STA and remove the module,
execute
"ifconfig wlan0 down" then execute
"rmmod IPN2220STA"
NOTE: More detail setting please access to User’s Manual on CD.
36