00 10 20 30 40 50 60

500

1000

1500

2000

IQID-360

IQID-300

IQID-240

IQID-180

Cooling effect in W incl supply air

Supply air flow, l/s

00 10 20 30 40 50

500

1000

1500Cooling effect in W, supply air included

Supply air flow, l/s

IQFC-300

IQFC-240

IQFC-180

IQFC-120

00 10 20 30 40 50

500

1000

1500Cooling effect in W, supply air included

Supply air flow, l/s

IQDA-300

IQDA-240

IQDA-180

�� �� �� �� 4� 5�

6��

4��

���

8��

����

����Cooling�effect�in�W,�supply�air�included

Supply�air�flow,�l/s

IQSA-300

IQSA-240

IQSA-180

IQSA-120

00 10 20 30 40 50

600

400

200

800

1000

1200Cooling effect in W, supply air included

Supply air flow, l/s

IQTA-300

IQTA-240

IQTA-180

36CB CHILLED BEAMS

DISCREET OPTIMUM COMFORT

Quick selection guideInduction beamsIQID• IQID chilled beam for flush mounting into false ceilings • Very flexible – available in a wide range of versions from basic to multifunctional • Suitable for standard 600 mm false ceiling modules • Mounting brackets for quick and easy mounting – lift up – snap on

• Available with the following functions: Comfort control, function for high air flow (2 hole rows), Flow Pattern Control (FPC air deflector), heating, control and regulation equipment, lighting and provision for a sprinkler system

IQFC• IQFC chilled beam for exposed installation • Air flow through beam is directed diagonally upwards • Capacity and flow directions are easily set • The bottom plate can be pushed aside to enable adjustment of air flow and capacity for inspection and cleaning • Patent pending sound attenuator • Enclosures for connections available as accessories • Mounting brackets for quick and easy mounting — lift up — snap on

IQDA• IQDA customized beam for exposed installation • Exclusive and slimline design • Capacity and flow directions are easily set • Patent pending sound attenuator • Mounting brackets for quick and easy mounting — lift up — snap on

IQSA• IQSA chilled beam for integration into false ceilings • Suitable for standard 300 mm false ceiling grids • Capacity and flow directions are easily set • The bottom plate can be pushed aside to enable inspection and cleaning • Patent pending sound attenuator • Mounting brackets for quick and easy mounting — lift up — snap on.

IQTA• IQTA chilled beam for exposed installation • Air and water connection within extended casing (300 mm/600 mm) • Available in three standard lengths, 210, 270 and 330 mm • Installed using special brackets attached to the wall or ceiling • The bottom plate can be pushed aside to enable inspection and cleaning.

Order No.: 18351-20, 02.2007 - Supersedes order No.: New Manufacturer reserves the right to change any product specifications without notice.

http://www.carrier.com

Chilled beam systems – design for optimum comfort

The 36CB range offers a comprehensive range of

air conditioning beams suitable for applications

where optimum comfort in the room is of importance.

Operating principles of Chilled beam systems

Active chilled beam systems use primary air that has been pre-cooled using chilled water and dimensioned to fulfil the requirements of good air quality for the occupied area. Induced room air is then cooled or heated by the beam to meet the room requirements.

“The 36CB range is a complete range of chilled beams and accessories suitable for ventilation, cooling and heating in all applications including high cooling demands and/or where there is a requirement for individual temperature control.”

New chilled beam 36CB - IQID –From a basic beam to a multi-service beam

Chilled beams with FPC (Flow Pattern Control)

The 36CB IQID is an integrated system for

ventilation, cooling and heating, fulfilling

most indoor air requirements:

• Comfort Control

• High air flow function

(2 rows of holes)

• Flow pattern control

• Heating

• Controls

• Lighting and provision

for a sprinkler system.

The 36CB is truly unique with the FPC (Flow Pattern Con-

trol) function that provides high flexibility in new buildings or

refurbishments. The combination of FPC and Comfort Control

gives the 36CB beam its unique characteristics.IQ Beams with FPC function• Adjustable air vanes in the outlet• Optimized for minimal noise and pressure drop

IQ Beams with FPC functionHighest possible efficiency can be maintained by adjusting the Comfort Control and air vanes! A combination of different angles on one side is possible.

When increased air flow is required, the flow pattern can be adapted to maintain optimal comfort in the room!

Designed to ensure draught-free and quiet air flow for perfect

room air comfort conditions, the 36CB range offers a cooling

and heating solution combined with efficient ventilation and

ensures:

• Energy savings

• Advanced comfort

• Flexibility

• Multi-service integration.

• Sections of 300 mm• Adjustable air vanes: 0° + 15° + 30° + 45°• Unique combination with Comfort Control

Chilled beam systems – design for optimum comfort

The 36CB range offers a comprehensive range of

air conditioning beams suitable for applications

where optimum comfort in the room is of importance.

Operating principles of Chilled beam systems

Active chilled beam systems use primary air that has been pre-cooled using chilled water and dimensioned to fulfil the requirements of good air quality for the occupied area. Induced room air is then cooled or heated by the beam to meet the room requirements.

“The 36CB range is a complete range of chilled beams and accessories suitable for ventilation, cooling and heating in all applications including high cooling demands and/or where there is a requirement for individual temperature control.”

New chilled beam 36CB - IQID –From a basic beam to a multi-service beam

Chilled beams with FPC (Flow Pattern Control)

The 36CB IQID is an integrated system for

ventilation, cooling and heating, fulfilling

most indoor air requirements:

• Comfort Control

• High air flow function

(2 rows of holes)

• Flow pattern control

• Heating

• Controls

• Lighting and provision

for a sprinkler system.

The 36CB is truly unique with the FPC (Flow Pattern Con-

trol) function that provides high flexibility in new buildings or

refurbishments. The combination of FPC and Comfort Control

gives the 36CB beam its unique characteristics.IQ Beams with FPC function• Adjustable air vanes in the outlet• Optimized for minimal noise and pressure drop

IQ Beams with FPC functionHighest possible efficiency can be maintained by adjusting the Comfort Control and air vanes! A combination of different angles on one side is possible.

When increased air flow is required, the flow pattern can be adapted to maintain optimal comfort in the room!

Designed to ensure draught-free and quiet air flow for perfect

room air comfort conditions, the 36CB range offers a cooling

and heating solution combined with efficient ventilation and

ensures:

• Energy savings

• Advanced comfort

• Flexibility

• Multi-service integration.

• Sections of 300 mm• Adjustable air vanes: 0° + 15° + 30° + 45°• Unique combination with Comfort Control

00 10 20 30 40 50 60

500

1000

1500

2000

IQID-360

IQID-300

IQID-240

IQID-180

Cooling effect in W incl supply air

Supply air flow, l/s

00 10 20 30 40 50

500

1000

1500Cooling effect in W, supply air included

Supply air flow, l/s

IQFC-300

IQFC-240

IQFC-180

IQFC-120

00 10 20 30 40 50

500

1000

1500Cooling effect in W, supply air included

Supply air flow, l/s

IQDA-300

IQDA-240

IQDA-180

�� �� �� �� 4� 5�

6��

4��

���

8��

����

����Cooling�effect�in�W,�supply�air�included

Supply�air�flow,�l/s

IQSA-300

IQSA-240

IQSA-180

IQSA-120

00 10 20 30 40 50

600

400

200

800

1000

1200Cooling effect in W, supply air included

Supply air flow, l/s

IQTA-300

IQTA-240

IQTA-180

36CB CHILLED BEAMS

DISCREET OPTIMUM COMFORT

Quick selection guideInduction beamsIQID• IQID chilled beam for flush mounting into false ceilings • Very flexible – available in a wide range of versions from basic to multifunctional • Suitable for standard 600 mm false ceiling modules • Mounting brackets for quick and easy mounting – lift up – snap on

• Available with the following functions: Comfort control, function for high air flow (2 hole rows), Flow Pattern Control (FPC air deflector), heating, control and regulation equipment, lighting and provision for a sprinkler system

IQFC• IQFC chilled beam for exposed installation • Air flow through beam is directed diagonally upwards • Capacity and flow directions are easily set • The bottom plate can be pushed aside to enable adjustment of air flow and capacity for inspection and cleaning • Patent pending sound attenuator • Enclosures for connections available as accessories • Mounting brackets for quick and easy mounting — lift up — snap on

IQDA• IQDA customized beam for exposed installation • Exclusive and slimline design • Capacity and flow directions are easily set • Patent pending sound attenuator • Mounting brackets for quick and easy mounting — lift up — snap on

IQSA• IQSA chilled beam for integration into false ceilings • Suitable for standard 300 mm false ceiling grids • Capacity and flow directions are easily set • The bottom plate can be pushed aside to enable inspection and cleaning • Patent pending sound attenuator • Mounting brackets for quick and easy mounting — lift up — snap on.

IQTA• IQTA chilled beam for exposed installation • Air and water connection within extended casing (300 mm/600 mm) • Available in three standard lengths, 210, 270 and 330 mm • Installed using special brackets attached to the wall or ceiling • The bottom plate can be pushed aside to enable inspection and cleaning.

Order No.: 18351-20, 02.2007 - Supersedes order No.: New Manufacturer reserves the right to change any product specifications without notice.

http://www.carrier.com