Quick Reference Guide QRG How to get Started using the ...fdc.fullerton.edu/_resources/pdf/QRG_How_to_get... · iClicker Mac Titanium Integration Last Revised: 09/05/13 Page 1 of

Quick Reference Guide QRG How to get Started using the iClicker Mac Titanium Integration

Last Revised: 09/05/13 Page 1 of 16

The iClicker Titanium integration allows grades from iClicker sessions to be uploaded into a Titanium course. Please email [email protected] if you need assistance with this process.

Processing Steps Screen Shots Step 1: Browse to the main page of the course you want to enable the iClicker block in. Click the “Turn Editing on” button.

Step 2: Under “Add a block”, in the bottom left of the page, click “Add…”.

Step 3: Select “i>clicker” from the “Add a block” menu list.

mailto:[email protected]

QRG How to get Started using the iClicker Mac Titanium Integration FINAL


Processing Steps Screen Shots Step 4: Instruct students to register their clickers by clicking “Remote Registration” in the iClicker block in the course.

Note that instructions for students registering their clickers are available in Titanium after they click “Remote Registration” in the iClicker block.

Step 5: Confirm that students have registered their clickers. Click “Admin Control” in the iClicker block. Select “Instructor Report”.



Processing Steps Screen Shots Step 6: Download the “CSUF iclicker for Mac v6.3.0.zip” file from the IT website to your Mac. Move the “iclicker Mac v6.3.0” folder to the computer or thumb drive you will run the iClicker application from.

Step 7: Open the iClicker application by double-clicking the “i>clicker” application.

The “i>clicker” application is located in the “iclicker Mac v6.3.0” folder that you copied to your computer or thumb drive in step 6.

You may be warned that “i>clicker” is an application downloaded from the internet. Click the “Open” button.



Processing Steps Screen Shots Step 8: Click the “New” button to create a new iClicker course.

Step 9: Fill in the “Course Name”, “Course Number”, and “Section Number” fields.

The course name does not have to match the Titanium course name exactly, however it is recommended to pick a name that clearly identifies the course. Click the “Create” button to create the course.



Processing Steps Screen Shots Step 10: Highlight the course you want to enter and click the “Choose” button.

Step 11:

Steps 11 and 12 in this guide only need to be performed once per course. Click the “My Settings” button.



Processing Steps Screen Shots Step 12:

Steps 11 and 12 in this guide only need to be performed once per course. Click the “LMS/Reg” tab. Select “Moodle”. Click the “Set for Course” button.

Step 13:

Steps 13 through 15 are only necessary if a new question list is needed for an upcoming iClicker session. Click the “Question” tab. Click “New Question List”.



Processing Steps Screen Shots Step 14:

Steps 13 through 15 are only necessary if a new question list is needed for an upcoming iClicker session. Create a new question and click the “Save” button. Click the “Close” button when you are finished creating and editing questions.

Step 15:

Steps 13 through 15 are only necessary if a new question list is needed for an upcoming iClicker session. You will be prompted to name the question file. Click Save.



Processing Steps Screen Shots Step 16: When you are ready to start an iClicker session with your class, click the “Start Session” button.

You will need to be running the application on a Mac connected to an iClicker base.

Step 17: If your course has a question list (like the one create in steps 13 through 15), you will be prompted to open the question list. Click the “Yes” button.

Step 18: Select a question list file. Click the “Open” button.



Processing Steps Screen Shots Step 19: Click the green arrow button to start the session.

Step 20: Click the “stop” button when the responses have been gathered.

Step 21: Click the “X” button to close the iClicker session.



Processing Steps Screen Shots Step 22: Click the “File” menu. Select “Open i>grader”.

iGrader is used to upload scores from iClicker sessions into Titanium.

Step 23: Select the course and click the “Choose” button.



Processing Steps Screen Shots Step 24: You will be prompted to download your Moodle roster. Click the “Download Roster” button.

Moodle is the software platform that Titanium runs on.

Step 25: You may be prompted that “CMS Integrate Wizard” is an application downloaded from the internet. Click the “Open” Button. Instructions regarding the session summary may appear. Click the “Close” button.

Step 26: If this is your first time syncing grades with Titanium, you will need to fill out the CMS Username and Security Key fields. The CMS username is your CWID (campus wide ID). This is a 9 digit number starting with an “8”. The Security Key needs to be generated and copied from the iClicker block in Titanium.



Processing Steps Screen Shots Step 27: Log in to the Titanium course you added the i>clicker block to. Click “Admin Control” in the iClicker block.

Step 28: Select the “Single Sign-On Security Key” tab. Copy your security key, so it can be entered into the iClicker application.

Step 29: Enter your CWID into the “CMS Username:” field. Enter your security key into the “Security Key:” field. Click the “Log In” button.



Processing Steps Screen Shots Step 30: Select the name of your Titanium course from the “Course:” menu. Click the “Import Roster” button.

Step 31: You will be prompted to Restart iGrader. Click the “Restart i>grader” button.



Processing Steps Screen Shots Step 32: A summary of the sessions will be displayed. Click the export icon.

Step 33: Check the box next to the date of the session(s) you would like to sync with Titanium. Click the “Export” button.



Processing Steps Screen Shots Step 34: You will be prompted that the export is complete. Click the “OK” button.

Step 35: You will be prompted to confirm the upload of grades to Titanium. Click the “Yes” button.

Step 36: Click the “Log In” button.



Processing Steps Screen Shots Step 37: Click the “Upload Scores” button.

Step 38: You will be prompted that data uploaded successfully. Click the “OK” button.

Step 39: Entering the grader report in the Titanium course will show the uploaded scores.

Documents

Quick Reference Guide QRG How to get Started using the ...fdc.fullerton.edu/_resources/pdf/QRG_How_to_get... · iClicker Mac Titanium Integration Last Revised: 09/05/13 Page 1 of