Upload
benja87
View
217
Download
0
Embed Size (px)
Citation preview
8/13/2019 Quick Guide to SPOS Weather to ECO Voyage Rev 1
1/8
Weather from SPOS to ECO Voyage
ECO Voyage can read weather data from SPOS, but this requires some preparation in SPOS.
Unfortunately will SPOS not automatically update weather file. This will describe how to
make data both for first plan and as voyage is progressing.
If you experience an Error, Blocked by land this can be corrected by changing the waypoint
track from Rhumb Line or Great Circle to Canal Passage (see next page).
8/13/2019 Quick Guide to SPOS Weather to ECO Voyage Rev 1
2/8
SPOS input
2. Press the Input tab
4. Choose the ECO
Voyage route, you
have exported
Can be changed to Canal
Passage to avoid problems
with Blocked by land
1. Start SPOS. Under Weather tab
update the forecast
3. Set Time to the Pilot departuretime and set the speed to
Required bottom speed
Recommended to set
Time between
waypoint to 6 hours
8/13/2019 Quick Guide to SPOS Weather to ECO Voyage Rev 1
3/8
SPOS route optimization1. Press the Route tab
2. Press the All buttonto make the calculation
of different alternatives
to optimize the planned
track.
Note: SPOS usually calculates four
alternatives: A great circle track, a
rhumb line track, a combined GC-
RL (composite) track and the
optimum track, which is distorted
according to the weather
prediction. The weather induced
speed loss usually makes all
alternatives appear slower than
the ECO Voyage figures, and can
be corrected by increasing the
Speed in calm weather under
the Input tab.
8/13/2019 Quick Guide to SPOS Weather to ECO Voyage Rev 1
4/8
SPOS Create Voyage
1. Choose the
Voyage tab
2. Press Create
Voyage button and
the dialogue box
appears
3. Choose the track,
you wish to follow,
provide a name and
click Next button
Note: You do not need
to fill in the remaining
textboxes. Press Next
and Finish
Note: This step is
necessary in order to
create weather
information to ECO
Voyage.
8/13/2019 Quick Guide to SPOS Weather to ECO Voyage Rev 1
5/8
The Weather Info tab
1. Choose the source of current
you want to use for calculation
and press the
button. The Mean (SPOS and
VESCOS) calculation method
will in most cases be optimal.
Info: The import of weather predictions will
allow the program to take the speed loss from
wind and wave encounters into consideration.
This will reduce unwanted oscillations in speed or
engine setting arising from varying conditions
during the voyage.
Info: Under this tab data for each leg may be corrected.
2. You might change
weather or current if data
seem unreasonable.
These may be corrected
for each leg from own
experience.
3. You might enter a max/min Speed from own
experience or from calculation by the Shallow water
tool. Or you might want a specific arrival time at a
certain WP
Note: Only rows where an Auto Fill checkbox is
shown can be edited.
8/13/2019 Quick Guide to SPOS Weather to ECO Voyage Rev 1
6/8
SPOS Update Voyage
1. Choose the
Voyage tab
2. Press Start
Voyage Update
button and the
dialogue box appears
3. Insert position and
time and click OK
button
Note: This step is
necessary in order to
update the weather
information into ECO
Voyage.
4. SPOS will calculate
remaining route with
latest weather
information. Press
Close
8/13/2019 Quick Guide to SPOS Weather to ECO Voyage Rev 1
7/8
SPOS Update Voyage
1. Press Finish
Voyage Update
button and the
dialogue box appears
2. Choose the track,
you wish to follow, and
click Next button
Note: You do not need
to fill in the remaining
textboxes.
Do NOT use Original
route for update.Sometimes a
waypoint is missing
8/13/2019 Quick Guide to SPOS Weather to ECO Voyage Rev 1
8/8
The Weather Info tab
1. Choose the source of current
you want to use for calculation
and press the
button. The Mean (SPOS and
VESCOS) calculation method
will in most cases be optimal.
Info: The import of weather predictions will
allow the program to take the speed loss fromwind and wave encounters into consideration.
This will reduce unwanted oscillations in speed or
engine setting arising from varying conditions
during the voyage.
Info: Under this tab data for each leg may be corrected.
2. You might change
weather or current if data
seem unreasonable.
These may be corrected
for each leg from own
experience.
3. You might enter a max/min Speed from own
experience or from calculation by the Shallow water
tool. Or you might want a specific arrival time at a
certain WP
Note: Only rows where an Auto Fill checkbox is
shown can be edited.