Quick guide for Implantmed SI-1010 / SI-1015 / SI-1023

Hygiene and maintenance – Motor with cable

Start-up – General

Connect the mains cableand foot control.

Connect motor cable. Insert the irrigant support. Attach the universal support and lock it.

Open the pump cover.Insert the irrigation tubing.

Close the pump cover. Plug the mains cable intoa earthed power socket.

Switch on the control unitat the power switch.

Control unit operation – Main menu

16

max. 50 Ncm1:1

rpm 40 000Implantology 1

My favorites Set program

Documentation (DOCU) Set speed / torque

Setup Progress display mode

Forward/reverse operation mode Programs 1 to 5

Set coolant volume

Pre-disinfection> If heavily soiled, clean first with disinfectant cloths.

Motor with cableDo not twist or kink the motor cable! Do not coil it too tightly!

Manual cleaning> Rinse and brush off with demineralized water (< 38°C)

Mechanical cleaning and disinfection> Use only thermo washer disinfectors with a drying program for preparation.

SterilizationW&H recommends sterilization according to EN 13060, class B. Other sterilization methods may reduce the life span of the motor.

storage> Store sterile goods dust-free and dry.

S-N2

S-NW

50914 AEN Rev. 000 / 15.07.2016Subject to alterations.

W&H Dentalwerk Bürmoos GmbH t + 43 6274 6236-0Ignaz-Glaser-Straße 53, Postfach 1 f + 43 6274 6236-555111 Bürmoos, Austria office@wh.com wh.com

Error message, work can be continued

Error message, work cannot be continued

Add user

Back

Edit

Confirm/save

Add drill protocol

Reduce/increase

Icons – Navigation

Icons – Information

Setting selected

Information

Favorite selected

rot = replace batteries

Foot control S-NW

Information with selection option

Foot control S-N2

Icons – Setup

Screen lock

User

Sound

Foot control

Torque curve

ON/OFF

System

Manage user

Set screen lock

LED

Reset

Dental numbering system

Licences

Module info

Device info

Software update

Language

FDI

UNS

Switch to next screen

Help

Icons – Information

Icons – Main menu

New docu

Complete docu

New position

Bar

Per cent

Documentation (DOCU)

Drill protocol

Total

Drill protocol group

Edit

Rename

Copy

Transmission

Torque

Speed

Favorite

Activate

Delete

Icons – Main menu Icons – Setup

Quick guide for Implantmed SI-1010 / SI-1015 / SI-1023

Pairing

Variable

System check

Interval

Fade-out time

Service

Restart

Foot control

Osstell

User interface

Motor control unit