Question Bank

1

Question Bank1. A Supplementary Work Order Draft for ` 5675/ - was issued by the WM of EM Section of an Ordnance Factory on General Machine Shop of the Same factory. This was objected to by the Account Office. As a correct approach, who should have approved the SWOD ?

(a)DGM(b)Jt.GM

(c)AGM(c)GM

2. GMs have been authorized to sell a product in Civil Trade. In this context, under which of the following conditions, GMs action will be wrong ;(a) To sell goods to Civil Trade without receiving and extract from OFB.

(b)To sell goods to Civil Trade without receiving advance payment from the customer

(c)To sell goods to Civil Trade without Recovering full overheads

(d)To sell goods to Civil Trade without getting them inspected by DGQA

3. Works Office issues Warrants to a production shop in how many parts ?(a)One(b)Two

(c)Three(c)Four

Notes :

1. Manufacturing Warrant

2. Material Warrant

4. The normal life of a Manufacturing Warrant is : (a)12 Months(b)9 Months

(c)6 Months(c)3 Months

5. The Production Ledger Cards are maintained ;(a) Extract wise

(b)Warrant wise

(c)Work Order wise

(d)Financial year wise

6. The Store keeper issues material to the Shops on the authority of a Demand Note and records the transaction in the Bin Card. The Production shops also makes a record of the Demand Notes transacted in one of the following documents : (a) Loan Register

(b)Examination Order

(c)Inspection Note

(d)Warrant

7. Which of the following documents could be used for booking Labour against warrants : (a) Allocation Sheet

(b)Day- Work Card

(c)Punching Media

(d)Labour Abstract

8. The shop copy of the Warrant is closed and Sent to Accounts Office through Works Office. This is done in a consolidated manner every Month. As a result, the Accounts Office also closes a document and intimates the same to General Manager every Month. What is that Document ?(a) Piece Work Card

(b)Cost Card

(c)Bin Card

(d)Priced Production Ledger Card

9. When a Cost Card is closed and variation in respect of Labour and Material is found to be beyond certain limit, the matter is brought to the Notice of General Manager. What is this Limit ? (a)5%(b)10%

(c)15%(c)25%

10. A Semi Statement is prepared in respect of all ;(a) Outstanding Warrants

(b)Completed Warrants

(c)Part Completed Warrants

(d)Untouched Warrants

11. The value of work in progress will not take into account / include one the following ;(a) Material in Hand

(b)Material partly worked

(c)Total Labour booking

(d)Stage labour booking

12. Under Except System of Accounting for components, the components after manufacture remain deposits with the ;(a) Production Shop

(b)Inspection Bond

(c)Assembly Shop

(d)Stores Section

13. As per rule, the costly tools having value more than a limit and life more than certain period, should be capitalized. What is the limiting value and tool life ;

(a) ` 1 Lakh and 4 years

(b)` 50 thousand and 3 years

(c)` 20 thousand and 2 years

(d)` 10 thousand and 1 year

14. Which one of the following doses not fall in the category of Process Costing ;

(a) Leather hide Manufacture at OEF

(b)Mosquito Net Manufacture at OCFS

(c)Steel Ingot Manufacture at MSF

(d)Acid Manufacture at OFBA

15. The Shop Budget Committee prepares an estimate of the ;(a) Direct Labour (DL) for the next year

(b)Direct Labour & VOH for the next year

(c)Direct Labour & FOH for the next year

(d)Direct Labour,VOH and FOH for the next year

16. Departmentalization of overheads means ;(a) Identifying Sections where the overhead expenses originate

(b)Booking against the Sections where the overhead expenses originate

(c)Booking against the Factory where the overhead expenses originate

(d)Booking the overhead expenses of the other departments like AO, CQA against a factory.

17. Step Ladder Allocation of Overhead Expenditure means ;(a) Systematic distribution of service section expenditure on Production Sections

(b)Systematic distribution of service sections expenditure on Service Sections.

(c)Systematic distribution of service section expenditure on Administrative sections

(d)Systematic distribution of service section expenditure on Mixed Sections.

18. Accounting of R&D Expenditure is done under which work- order series number ;(a)01(b)02

(c)60(c)90

19. Generally, the Price List of IFD items is published by whom and in which month for the next financial year ;(a) Consignee Factory; March

(b)Consignee Factory ; January

(c)Consignor Factory ; March

(d)O.F. Board ; January

20. When material received is less than the invoice / challan quantity, a report is prepared which is called ;

(a) Despatch Report

(b)Deficiency Report

(c)Detailed Report

(d)Discrepancy Report

21. In case of damaged / broken consignment ;(a) Open delivery is taken

(b)No delivery is taken

(c)Reverse delivery is taken

(d)Protest delivery is taken

22. How many digits are there in item codes of raw materials in all Ordnance Factories ? (a)10 digits(b)15 digits

(c)8 digits(c)6 digits

23. For better preservation, Paper Items should be preserved in ;(a) Humidity Controlled atmosphere

(b)Anti rust conditions

(c)Oil should be sprayed

(d)None of these

24. Examination Order is raised for the items of store ;

(a) Having limited shelf life

(b)For all the items

(c)For stock pile items

(d)Inflammable items

25. Withdrawal for the stock pile items can be done with the approval of ;(a) Test Audit

(b)General Manager

(c)DGOF

(d)Ministry Of Defence

26. For disposal of scrap, committee for fixing Reverse price is appointed by ;(a) Account Officer

(b)DGOF

(c)General Manager

(d)Store Officer and Material Purchase Officer Jointly

27. Receipt Voucher Number is allotted ;(a) Just after receipt & counting of material

(b)After inspection of material by QA/ WIS

(c)After bringing the material on charge by Godown Keeper

(d)None of the above

28. Making Railway & Lorry Transport Claim is the work of ;(a) Store Receipt

(b)Store Issue

(c)Store Stock

(d)Store Bond

29. IN a Civil Trade quotation, GM can quote a price ;(a) Not below Direct Material (DIM) + Direct Labour (DL)

(b)Not below Direct Material (DM) + Direct Labour (DL) + 20% (VOH +FOH)

(c)Below Direct Material (DM) + Direct Labour (DL)

(d)Needs OFBs approval

30. How much is the assessed life of a permanent building for calculating depreciation charges ;(a)40 years(b)50 years

(c)60 years(c)100 years

31. Collection Supervisor ;(a) Takes a Not received endorsement on RR every day till the material is receive by him

(b)Makes claim on lorry drivers

(c)Collects only whatever is given by the Railways


32. Discrepancy noted at the time of during delivery from Railways should be recorded in ;

(a) Bin Card

(b)Railway Delivery Book

(c)Wharfage Bill of Entry


33. Wagons must not be opened ;(a) Without goods Clerk being a witness

(b)Without the Security Officer

(c)Without Police - Constable


34. With the On Line PPC System in Indian Ordnance Factories ; (a) PSL balance and Bin balance must be same at any moment

(b)PSL and Bin balance can never be same at a given moment as documents posted in each will be different

(c)PSL balance will be lagging behind the Bin Balance till the document is posted

(d)PSL balance will be lagging behind the Bin Balance till the document is posted in the Bin Card

35. General Manager has power to supply free sample of following value to customers against an enquiry ;(a)` 500(b)` 1,000

(c)` 5,000(c)`2,000

36. Daily attendance of the workers is marked in the document called ;(a) Muster Roll

(b)Attendance Roll

(c)Casualty Report

(d)Overtime Report

37. Following is an element of wages paid to a workman ;(a) Injury Pay

(b)Compensation paid as per rules

(c)Festival Advance


38. The Bonus which is paid on the basis of performance is known as ;(a) Incentive Bonus

(b)Productivity Linked Bonus

(c)Saturday Bonus

(d)Piece Work

39. Class III form of Extract is used for ;(a)SWOD(b)IFD

(c)Indent(c)Extract

40. When Army is placing order for an item, the documents is known as ;(a)Indent(b)Warrant

(c)Job Order(c)Extract

41. Indent is placed on ;(a) Ministry of Defence

(b)Ordnance Factory Board

(c)Directly to the Factory

(d)None of these

42. When a warrant remains incomplete at the end of the financial year ;(a) Warrant is closed and fresh warrant is issued next year

(b)Explanation for Non- completion is called

(c)Board of Enquiry is constituted to know the reasons

(d)Semi statement is prepared

43. The charges which vary along with the production in direct proportion are called ;(a) Variable Overhead

(b)Flexible Overhead

(c)Semi Fixed Overhead

(d)None of these

44. The budget of the Ordnance Factories got separated from the Army on ;(a) 01.04.1987

(b)01.04.1978

(c)01.04.1993

(d)01.04.1991

45. The funds (budget) of the Ordnance Factories come from ;(a) The consolidation funds of India

(b)Ministry of Defence

(c)Reserve Bank of India

(d)Army

46. In ABC analysis, in which category , maximum number of items are placed ;

(a) A Category

(b)B Category

(c)C Category

(d)None of these

47. SV Group works under the control of ;(a) Test Audit

(b)Accounts Office

(c)General Manager

(d)DGOF

48. The minimum price for disposal of scrap is called ;(a) Rock Bottom price

(b)The lowest quotation

(c)Reserve Price

(d)Difference of the Highest and Lowest Quotation

49. When the material is taken on the stock charge the following document is prepared ;(a) Receipt voucher

(b)Material completion voucher

(c)Material abstract

(d)SHIS

50. When excess material is found in the factory without any record, the following document is prepared ;(a) Receipt Vouchers

(b)CRV

(c)Bin Card

(d)SHIS

51. When there is a difference of planned overhead expenditure and actual overhead expenditure, the analysis done to find out the reasons is known as ;(a) WIP analysis

(b)Performance analysis

(c)Variance analysis

(d)None of these

52. Issue and closure of warrants is the responsibility of ;(a) Rates and Estimate Section

(b)Works Office

(c)Production Office

(d)Accounts Office

53. Demurrage is paid for ;(a) Taking late delivery

(b)Perishable goods

(c)It is a tax levied by Government

(d)When volume of the goods is beyond permissible limit

54. The Full Form of UAR is ;(a) Un- Authorized Rejection

(b)Un Avoidable Rejection

(c)Universally Authorized Report

(d)None of these

55. The work to cover the manufacture of article found defective in the course of manufacture is authorized under ;(a) Rejection Warrant

(b)Replacement Warrant

(c)Open Warrant

(d)None of these

56. The work orders common to all factories are given in :(a) Syllabus of work orders Part I

(b)Syllabus of work orders Part II

(c)Syllabus of work orders Part III

(d)None of these

57. All the receipt vouchers are linked with the corresponding issue vouchers of the consignor factory. Unlinked cases pertaining to a particular receipt voucher is called ;(a) Outstanding asset

(b)Outstanding liability

(c)Outstanding issues

(d)None of these

58. In the following, which is a horizontal fixed path type material handling equipment ;

(a) Hoist

(b)Fork Lift

(c)Mobile Crane

(d)Belt Conveyor

59. For preservation of paint ;(a) Roll drums on periodical basis

(b)Use cool places as per directives

(c)Protect against Heat and Light

(d)Pack with naphthalene powder

60. French Chalk is applied for preservation of ; (a) Wooden Items

(b)Rubber Items

(c)Woolen Items

(d)None of these

PART BThere are two alternatives T for True and F for False given against each statement in this part. If T is correct, round on the correct alternative like T. Each question Carries 1 Mark.

61. VED classification is used for controlling spare parts inventory.TF

62. There are 10 digits in a work order

TF

63. Leather items are protected by applying coating of Dubbin.

TF

64. Maintenance workers not attached to the production section are not entitled to the Incentive Bonus.

TF

65. Incentive Bonus is paid to the essential maintenance workers attached to the Production Section at 50% of piece work profit earned by all the piece workers, in the particular Production Shop.

TF

66. Unfavourable weather conditions resulting in failure of electrical power supply is a valid ground / cause for admissibility of idle time.

TF

67. After carrying out ABC analysis maximum Inventory Control to be used for C class items.TF

68. A piece worker is entitled to Night Shift Bonus.TF

69. S.W.O.D denotes indirect expenditure.

TF

70. Maintenance and repairs of building and depreciation of building are fixed overhead charges.TF

71. Warrants are closed once in a month and forwarded to Accounts.TF

72. Warrants are closed by production Section.TF

73. Transfer Vouchers are prepared for transfer of expenditure from one work order to another.TF

74. Only one item of material can be returned on one return note.TF

75. Red demand Notes are used only in factories working on the except system.TF

76. FIFO system is used for chemical stores.

TF

77. Open Stores System is a storage System in which Goods / materials are stored in the open condition.

TF

78. For drawal of an item from stock pile, the item is to be first transferred to Stock Bin Card by a transfer Voucher.TF

79. XYZ analysis is made based on the stock holding value of the items.TF

80. After carrying out ABC analysis maximum Inventory Control to be used for C class items.TF

81. Receipt voucher is same as MIS except that receipt voucher number is allotted on it.TF

PART C

Attempt any 4 (Four ) Question from this part. Each Question carries 5 marks.

82. Give full form of the following ; 1.LIFO

2.FOB

3.EOQ

4.SWOD

5.UAR%

83. Write the preservation method for the following items ;

1.Woolen items

2.Chemicals

3.Sheet Steel

4.Printed Circuit Boards of CNC machineries

5.Leather Items

84. What are the financial powers of MoD , OFB and GM in regard to fixation of price of an item vis a- vis its cost for a purpose of Civil Trade ?

85. What is an Estimate and for what purpose it is utilized ? 86. Explain the stock verification process in Ordnance Factories and Various documents raised by S.V. Group ? How is DD or DE regularized ?

87. The number of extracts in Ordnance Factories is ;

(a)4(b)5

(c)6(c)7

88. A Class IV extract pertains to : (a)Outturn and Services to Army, Navy & Air Force

(b)Payment Orders including Orders from MES & Non Military Departments

(c)Services to other Ordnance & Clothing Factories

(d)Service Internal to the Factories other than Capital Services

89. Extracts pertaining to payment orders including orders from MES & Non Military Departments is a _________ extract :(a)Class - I(b)Class - II

(c)Class III(c)Class -IV

90. SWOD are issued for :(a)Minor repairs to Plant & Machinery, Shop tools & Other minor internal Services.

(b)Manufacturing Components

(c)Manufacturing for assembly of Sub-assemblies

(d)All type of Assemblies

91. SWOD is ;(a)Standard Work Order Demand

(b)Standard Work Order Draft

(c)Supplementary Work Order Draft

(d)Supplementary Work Order Demand

92. Estimates for small orders & are not of recurring nature are called ;(a)Recurring Estimate

(b)Non Recurring Estimate

(c)Spot Estimate

(d)Standard Estimate

93. Documents like Receipts, Issue voucher, Demand Notes and Returns Notes etc received by Accounts Office upto __________ on the day will be posted in the Priced Store Cum Provision Ledgers by Accounts Office on the Same day ;(a)10 AM(b)12 Noon

(c)2 PM(c)4 PM

94. Material Inward (MI) slips are prepared on form ; (a)IAFO 1888(b)IAFO 1988 (C)

(c)IAFO 1880(c)IAFO - 1980

95. Materials, on Inter- Factory Demands, can be issued by authority of ;(a)DGOF

(b)General Manager

(c)Ministry of Defence Production

(d)Ministry of Defence

96. Authority of issue of material on Inter Factory Demand is given on form ;

(a)IAFO 1900(b)IAFO 1911

(c)IAFO 1905 (c)IAFO - 1921

97. For supply or issue on loan from a Factory to Military, Non Military or Govt. Departments, the only authority is :

(a)DGOF

(b)General Manager

(c)Ministry of Defence Production

(d)Ministry of Defence

98. Number of Issue Vouchers to be prepared in the case of Inter Factory issues is / are ;(a)3(b)4

(c)5(c)6

99. In case of loan issued to private firms the amount of Security Deposit will be ;(a)Equal to book value or market value which is higher

(b)Market value + 5% over Market Value

(c)In Addition to A , 5% on Book or Market value as the case may be

(d)In addition to A , 5% on books or Market Value as the case may be + another 5% on the inclusive rate

100. Ledger Folios for stores are numbered with _______ Digits.(a)6(b)7

(c)9(c)10

101. Work Orders are numbered with _________ Digits.(a)6(b)7

(c)9(c)10

102. The first two digits of Work Order Code indicate ;(a)Classification of work by indentors

(b)Description of work

(c)Control

(d)None of these

103. If the work pertains to Inter Factory service, the main work order series will be ;(a)50(b)60

(c)70(c)80

104. Allocation Sheet is a ;(a)Monthly Document to relate to indirect Work Orders

(b)Monthly Document to relate to Direct Work Orders

(c)Work Order by itself

(d)None of these

105. For Day Worker, the time wage is calculated as per the formula given below :(a)NSP ?? x Number of days present

(b)NSP x Number of days present

(c)NSH P ???? x Number of Days present

(d)NSHP ???? x Number of days present

Where

P=Basic Pay

N=Number of days in the month

S=Number of Sundays in the month

H=Number of paid holidays, if any, during the month

106. Work Card prepared by shops claiming payment according to the rates authorized for each article is called ;(a)Day Work Card

(b)Piece Work Order

(c)Labour Card

(d)Work Card

107. Receipt Vouchers are priced at ;(a)Average Ledger Rate

(b)Actual cost of Purchase

(c)Actual cost of Purchase + Incidental expenditure upto the point of receipt

(d)None of these

108. Demand Note & Returns Notes are priced at ;

(a)Actual cost of new receipt

(b)Average Ledger rate including new receipt & existing stock

(c)Ledger rate of existing stock

(d)None of these

109. Average Ledger Rate should be calculated ;

(a)Once in a Month

(b)Once in every fort-night

(c)Once in a week

(d)Every time a new receipt occurs

110. In syllabus of Work Order, Fixed Overhead expenses are denoted by series ;

(a)01(b)02

(c)03(c)04

111. The Step Ladder Allocation of services is a method for ;

(a)Calculating variable overheads of different sections

(b)Calculating fixed overheads of different sections

(c)Allocating expenditure relating to Salaries, contingencies, depreciation etc

(d)Departmentalization of Overhead Expenses

112. The rates for levy of VOH charge are calculated by the Shop Budget Committee on ______Basis ;(a)Monthly(b)Quarterly

(c)Bi annual(c)Annual

113. Central Demand is placed by ;

(a)Central Ordnance Depot (COD)

(b)Ordnance Factory Board

(c)PV Section

(d)Local Accounts Office

114. Under Except System of Accounting for components, the components after manufacture remain deposited with the ;(a)Production Shop

(b)Inspection Bond

(c)Assembly Shop

(d)Stores Section

115. In the Quasi Commercial Accounting system, how many types of performance indices are calculated and how many times in a financial year ? (a)Single Point ; Twice

(b)Two Point ; Once

(c)Single Point ; Once

(d)Two Point ; Twice

116. CRV stands for ;(a)Clear Receipt Voucher

(b)Certified Receipt Voucher

(c)Combined Receipt Voucher

(d)Certified Railway Voucher

117. Materials handled in a factory are ; (a)Material on Stores Charge

(b)Materials on Production Charge + Material on Stores Charge + Capital items : Inventory Items

(c)Materials on Stores Charge + Inventory Items + Capital Items + Stock Pile Items

(d)Materials on Stores Charge + Materials on Production Charge + Stock Pile Items + inventory items.

118. Materials under Stores Charge comprise of : (a)Raw Materials and Components, Processed Materials, Manufactured items, recoveries from unserviceable articles.

(b)Tools , Gauges and General Shop stores

(c)General shop store and A

(d)Both A & B

119. The Items on Store Charge are accounted for in the ; (a)Priced Stores Ledger + Bin Cards

(b)Priced Stores Ledger

(c)Bin Cards

(d)Material Estimates

120. Inventory Stores are of :

(a)Expensive and Permanent nature

(b)Expensive and Quasi Permanent nature

(c)All types of stores of permanent nature

(d)All types of Stores of Quasi Permanent Nature

121. MIS (Material Inward Slip) is prepared by : (a)Security Staff at Gate

(b)Representative of Purchase Section

(c)Representative of MCO (Material Control Office)

(d)Representative of Stores Section

122. CRVs are prepared on Form ; (a)IAF(Fac) -151(b)IAF (Fac) - 45

(c)IAFZ 2096(c)IAFO - 2096

123. MIS are numbered in _____ digits.(a)3(b)4

(c)5(c)6

124. Non moving items are these which have not been drawn for a continuous period of _____ or more ;(a)1 year(b)2 years


125. Results of Stock Verification of Stock and Stock Pile items will be entered in Form ;(a)IAFO-1390(b)IAFO- 1355

(c)IAFO- 1380(c)IAFO- 1395

126. After every Stock Verification, the SV Group will furnish _______ copies of stock taking sheets to Accounts Office ;(a)1(b)2

(c)3(c)4

127. Loss in transit in respect of foreign supplies, no adjustment to store account is necessary and considered as Cash Loss are ;(a)Articles taken on charge in packing & Subsequently found shortage

(b)Only Losses upto the Port of Disembarkation in India

(c)Only Losses occurring in India during transit from Port of Disembarkation to the ultimate destination

(d)Any loss during transit from Consignor to Consignee but not taken on charge

128. The loss of stores as posted in the Ledger and accounted for in the P.S.A will be booked to Work Order ;

(a)02/00023/00 & 02/00024 / 00

(b)01/00020/00 & 01/00021/00

(c)022/00020/00 & 02/ 00021/00

(d)01/00023/00 & 01/00024/00

129. For difference between the Priced Store Ledger balance and the actual stock, following voucher will be prepared ;(a)Deficiency Voucher

(b)Difference Voucher

(c)Discrepancy Voucher

(d)Loss Voucher

130. Reserve / Guiding prices are fixed not more than ______ days before the auction;(a)4(b)3

(c)2(c)1

131. Reverse / Guiding Price can be made known to the auction supervisor ______ before the auction ;

(a)One day

(b)On the day of auction half an hour

(c)On the day auction 1 hour

(d)On the day of auction 2 hours

132. An officer not below the rank of a _________ officer, should be deputed to attend the auction as Accounts Representative ; (a)Section Officer

(b)Asstt. Accounts Officer (AAO)

(c)Accounts Officer (AO)

(d)Asstt. Controller of Defence Accounts (ACDA)

133. Loss Statements on Form ________ are raised when demurrage / Warfage becomes payable because of the negligence or inaction of the consignor or consignee ;(a)IAFA -490(b)IAFA 498

(c)IAFA -500(c)IAFA - 520

134. Over pressure in liquid chemical can occur due to ;(a)Pumping out liquid or emptying liquid under gravity too fast

(b)Decrease in temperature of liquid contents

(c)Condensation of vapour contents on liquid surface

(d)Increase in temperature of liquid contents

135. Bulk storage of hazardous liquids are suitable because ;(a)They provide huge space

(b)They are cheaper & allow dispersion of leaks and segregate store from the process

(c)Toxic affect is minimized

(d)None of these

136. What is the time limit, after which Railways will not be liable for any damages after termination of transit ? (a)4 days(b)5 days

(c)6 days(c)7 days

137. The Gross and true weights of wagons will be taken in case of dispatch & receipt of ;

(a)Full wagon loads of items of special value e.g. Non ferrous meal ingots

(b)Full wagon load of any item

(c)Partial or full wagon load of any item

(d)Partial or full wagon load of special item e.g. Non ferrous metal ingots

138. The minimum rank of representative of the stores section of factory for supervision of wagon unloading is ;(a)JWM

(b)Asst. Foreman

(c)Chargeman

(d)Supervisor

139. Annual Inventory Checking is carried out by ;(a)Store Holder

(b)A Gazetted Officer

(c)Stock Verification Group

(d)Accounts Office

140. The intention of Inventory Control is to ;(a)Reduce the work of Store Keeper and reduce Folio Numbers & Variety of items.

(b)Ensure recycling of the money as many times as possible during the financial year

(c)Avoid handling of too many documents in stores

(d)None of these

141. What is full form of EOQ ?

(a)Economic Ordering Quantity

(b)Essential Ordering Quantity

(c)Essential Outstanding Quantity

(d)Equal Order Quantity

142. For Railway claim to be preferred, the Gazetted Officer / Committee/ Board formed for the purpose will record the apparent cause of discrepancy and record it on ;(a)Receipt Voucher

(b)Material Inward Slip (MIS)

(c)Railway Receipt

(d)Challan

143. MI Slips are prepared in _____ copies ;(a)3(b)4

(c)5(c)6

144. What is the time limit of preparation of MI Slips on receipt of material ? (a)24 Hrs.(b)48 Hrs

(c)72 Hrs.(c)12 Hrs.

145. MI Slips are sent to ________ section after its preparation ;

(a)Stores

(b)Planning

(c)Material Control Office

(d)Works Inspection

146. One of the procedure for reducing physiological cause as a principle of minimizing Hazards in dangerous and Hazardous Goods is :

(a)Rotation

(b)Removal

(c)Rolling

(d)Releasing

PART B

There are two alternatives T for True and F for False given against each statement in this part. If T is correct, round on the correct alternative like T. Each question carries 1 mark.

147. General Manager Orders in the shape of a Replacement Warrant to cover the manufacture of article found defective in course manufacture.TF

148. Spot Estimates are prepared on the same form as SWOD.

TF

149. For the purpose of accounting in Ordnance Factories the term Stores does not include Plant & Machinery.

TF

150. The consignor factory will furnish 2-Copies of Issue Vouchers to the Local Accounts Officer (LAO).

TF

151. For different description of material a common material Demand Note can be prepared.TF

152. Stores which are ordinarily manufactured in factory will not be issued direct from stock.TF

153. Industrial Employee are appointed on a monthly rate of pay in a progressive scale.TF

154. Piece Workers are eligible for payment of paid holidays in addition to their piece work earnings.TF

155. The rates for levy of VOH charge are calculated and approved by Central Budget Committee.TF

156. There are three types of overheads in Ordnance Factories.

TF

157. Tools & Gauges are considered to be stores on Production Charge.TF

158. Stock pile items are strategic items of stores which are very difficult to procure.TF

159. Receipts on account of transfers from capital assets is an internal transaction and is accounted for on the receipt side of the stores accounting records.TF

160. For receipts from Factorys own manufacture, Inspection Note made out is used both as an Issue Voucher and Receipt Voucher.TF

161. The Accounts Office may carry out surprise physical stock verification.TF

162. In case of dis-agreement on fixing reserve / guiding prices for auction between Factory Management and Local Accounts Officers , the decision of General Manger will prevail.TF

163. On receipt of RR (Railway Receipt), the particulars will be entered in prescribed register and the estimated date of arrival of consignment recorded.TF

164. If the contract stipulates FOR Station of dispatch, then under no circumstances the supplier will be responsible for loss in transit.TF

165. Toxic material cause corrosive actions.TF

166. Lithium is a water sensitive fire and explosion hazard.TF

PART C

(Each question carries 5 Marks)

167. Define : 1.Waste Products

2.Scrap

3.Metallic Scrap

4.Surplus Stores

5.Declared Surplus

168. Write procedure for delivery of full wagons :169. What are the duties of Accounts under the heads ? I.Records of Time Wages

ii.Stores Accounting

iii.Cost & Production Accounting

170. What is : I.Departmentalisation of Overhead Expenses

ii.Step Ladder Allocation

PART A

(Each Question carries 1 Mark)

171. What is full form of EOQ ? (a)Economic Ordering Quantity

(b)Essential Ordering Quantity

(c)Essential Outstanding Quantity

(d)Equal Order Quantity

172. Annual Inventory Checking is carried out by :(a)Store Holder

(b)A Gazette Officer

(c)Stock Verification Group

(d)Accounts Office

173. One of the procedures for reducing physiological cause as a principle of minimizing Hazardous in dangerous and Hazardous Goods is :(a)Rotation

(b)Removal

(c)Rolling

(d)Releasing

174. Loss Statements on Form ______ are raised when demurrage / Wharfage becomes payable because of the negligence or inaction of the consignor or consignee :(a)IAFA -490(b)IAFA 498

(c)IAFA -500(c)IAFA - 520

175. Reserve / Guiding prices are fixed not more than ______ days before the auction.(a)4(b)1

(c)3(c)2

176. What is the time limit, after which Railways will not be liable for any damages, after termination of transit ? (a)4days(b)5 days

(c)6 days(c)7 days

177. The items on Storage Charge are accounted for in the ;

(a)Priced Stores Ledger + Bin Cards

(b)Priced Stores Ledger

(c)Bin Cards

(d)Material Estimates

178. Under Except System of Accounting for components, the components after manufacture remain deposited with the ;(a)Production Shop

(b)Inspection Bond

(c)Assembly Shop

(d)Stores Section

179. For better preservation, paper items should be preserved in ;(a)Humidity Controlled Atmosphere

(b)Anti rust Conditions

(c)Oil Should be sprayed

(d)Anti- termite should be sprayed

180. Receipt Voucher number is allotted ; (a)Just after receipt & Counting of Material

(b)After inspection of material by QA/ WIS

(c)After bringing the material on charge by Godown Keeper.

(d)None of these

181. In a Civil Trade Quotation, General Manager can Quote a price ;

(a)Not below Direct Material (DM) + Direct Labour (DL)

(b)Not below Direct Material (DM) + Direct Labour (DL) + 20% (VOH +FOH)

(c)Below Direct Material (DM) + Direct Labour (DL)

(d)Needs OFBs approval

182. With the On Line PPC System in Indian Ordnance Factories ;(a)PSL balance and Bin Balance must be same at any moment.

(b)PSL and Bin balance can never be same at a given moment as documents posted in each will be different.

(c)PSL balance will be lagging behind the Bin balance till the document is posted

(d)Bin balance will be lagging behind the PSL balance will the document is posted in the Bin card

183. A system in which separate warrants are issued for components and sub assemblies of a particular assembly , is called ;(a)Sub Warrant System

(b)Except System

(c)Both (A) & (B)

(d)None of these

184. Standard Man Hours (SMH) is : (a)Same as estimated man hours

(b)Estimated man hours + Rest Allowance

(c)Estimated Man Hours + 25% Allowance for profit

(d)None of these

185. The last digits of the work order indicate ;

(a)Factory Code

(b)Section Code

(c)Work Code

(d)Customer Code

186. Step Ladder statement for allocation of overheads is prepared by ;(a)Planning Office

(b)Central Budget Committee

(c)Local Accounts Office

(d)None of these

187. Labour Charges for converting raw material into finished products are accounted as ;(a)Indirect Labour Charges

(b)Labour Overheads

(c)Variable Overheads

(d)Direct Labour Charges

188. Cost Cards are opened ;

(a)On the basis of each warrant

(b)For each section

(c)For each cost centre

(d)For each factory

189. S series Voucher is prepared for ;(a)Stock items

(b)Semi finished items

(c)Serviceable items

(d)Surplus store to be used

190. Meaning of Ground balance in store stock refers to ;(a)Balance shown in ledger

(b)Balance shown in Bin Card

(c)Balance found on physical verification

(d)Any of these

191. Following documents are required to be made, for issue of material from stock to a sister factory for machining assistance ;(a)Examination Order and a P Voucher

(b)S Voucher

(c)Examination Order and a Nominal Issue Voucher

(d)None of these

192. M issue Voucher is prepared for issue of ;(a)Items from stock inventory

(b)Items manufactured by factory

(c)Nominal items

(d)Capital Items

193. Bill of lading is connected with ; (a)Despatch by Air

(b)Despatch by Sea

(c)Despatch by Rail

(d)Despatch by Road

194. 02 Series of Work Orders represent expenses of : (a)Fixed Overheads

(b)Variable Overheads

(c)Direct Material

(d)None of these

195. When a warrant remains incomplete at the end of the financial year ;(a)Warrant is closed and Fresh Warrant is issue next year

(b)Explanation for Non Completion is called

(c)Board of Enquiry is constituted to know the reasons

(d)Semi Statement is prepared

196. The net expenditure for material for each warrant is posted in the ;(a)Cost Card pertaining to the concerned warrant

(b)Work Order

(c)Bill of Material

(d)Extract

197. List of the type and number of parts needed to produce a given product is known as ;(a)Production Planning

(b)Bill of Material

(c)Capacity Planning

(d)Operating Budget

198. Stock Pile is a ;(a)Revenue Expenditure

(b)Capital Expenditure

(c)Nominal Expenditure

(d)None of these

199. The overheads which do not change with volume of production are know as ;(a)Rigid Overheads

(b)Volume Overheads

(c)Fixed Overheads

(d)Non Flexible Overheads

200. While pricing receipt vouchers in case of imported stores, the following elements are taken in to accounts ;(a)Actual cost + Sea Freight + Port handling charges

(b)Actual cost + Sea Freight + Customs Duty + Inland Freight

(c)Actual Cost + Sea Freight + Customs Duty + Port Handling Charges + Inland Freight

(d)Actual cost + Sea Freight + Customs Duty + Port Handling Charges

201. The term LIFO means :

(a)Last Item For Out

(b)Last In First Out

(c)Last Issued For Overhead

(d)Less Insured For Order

202. Item which has not moved for last six months is categorized as ;(a)None Moving

(b)Slow Moving

(c)Obsolete

(d)None of these

203. Annual accounts of Ordnance Factories are prepared in ;(a)Two Parts

(b)Three Parts

(c)One Part

(d)Five Parts

204. Loss of stores due to ________ have to be regularized with the findings of Board of Inquiries ;(a)Suspected theft , fraud or neglect

(b)Any reason what so ever

(c)Any reason including evaporation, spillage and such authorized technical reasons


205. A labour Estimate will not have ;

(a)Operation Description

(b)Class of Labour

(c)Operation Time

(d)Job Rate

206. Non Recurring revision of Rate means authorization of : (a)Additional operation time in an estimate.

(b)Additional operation time in a warrant

(c)Additional money in a warrant

(d)Additional Piece work profit

207. Step Ladder Allocation of Overhead Expenditure Means ; (a)Systematic Distribution of Service Section expenditure on Production Sections.

(b)Systematic Distribution of Service Section Expenditure on Service Sections

(c)Systematic Distribution of Service Section Expenditure on Administrative Sections.

(d)Systematic Distribution of Service Section expenditure on all Sections.

208. In XYZ analysis , X is the ;(a)List of High Value active items whose value is 70% of total value of all the items held in the stock.

(b)List of High value Direct items whose value is 70% of total Direct items consumed in the previous year

(c)List of High value stock items whose value is 70% of total stock value

(d)List of High Value Indirect items whose value is 70% of total indirect items consumed in the previous year

PART B

There are two options T for True and F for False given against each statement in this part. If T is correct, round on the correct option like T. Each question carries 1 mark.

209. All claims on Railway must be preferred within six months from the date of Booking of the consignment.TF

210. Pallets are used in reducing material handling cost.TF

211. VED classification is used for controlling spare parts inventory.TF

212. General Manger of each Factory issues the price list of the items manufactured in the previous year after 31st March.

TF

213. Short Leave Can be granted with Pay.

TF

214. Statement of Accounts Receivable is part of Quasi Commercial Accounting.TF

215. In any factory, profit shown in Annual Accounts is the same as Negative Net Budget.

TF

216. In the warrant number last four digits are used for Sub Warrant Number.

TF

217. Salaries paid to supervisory personnel are fixed overhead expenses.

TF

218. FIFO system is used for chemical stores.

TF

219. Open deliveries is taken when the package are received very late.TF

220. Nominal transactions are not routed through store accounting documents.

TF

221. Maintenance and repairs of building and depreciation of building are fixed overhead charges.

TF

222. Warrants are closed once in a month and forwarded to Accounts.

TF

223. Warrants are closed by production Section.

TF

224. Transfer Vouchers are prepared for transfer of expenditure from one work order to another.TF

225. Red Demand Notes are used only in factories working on the except system.TF

226. The Accounts Office may carry out surprise Physical Stock Verification.TF

227. Spot Estimates are prepared on the Same form as SWOD.TF

228. Tools & Gauges are considered to be stores on Production Charge. TF

PART C

(Each Question Carries 5 Marks)

229. What is meant by Annual Accounts ? How is it finalized in Ordnance Factories ? 230. What is the significance of compiling these on 30th June while production year closes on 31st March itself ?

231. Write the procedure to be adopted for adjustment of discrepancy in a store received against IFD from a sister Ordnance Factory.

232. Write Short Notes on Expense Voucher and Nominal Voucher

233. =What are the situations in Which NRM & NRR are raised ? How are these kept under control ?

PART A

234. How much incentive bonus is paid to the essential maintenance workers attached to the production sections ? (a)At 50% of piece work profit earned by all the piece workers

(b)At 50% of the average piece work profit earned in the month by all piece workers in the factory

(c)At 50% of their basic pay

(d)At 75% of piece work profit earned by all the piece workers

235. Muster Roll is a document in which ;(a)Daily attendance of the workers is marked

(b)Records of production are kept

(c)Profit and Loss accounts of the factories are maintained

(d)Cash transactions are recorded.

236. Productivity Linked Bonus is admissible to Ordnance Factories employees drawing emoluments up to ______ per month.(a)Rs. 2,500(b)Rs. 3,500

(c)Rs. 4,000(c)Rs. 4,500

237. For Inter- Factory Demands which form of Extracts is used ;(a)Class I(b)Class II

(c)Class III(c)Class -IV

238. The basic unit of time for recording the attendance in the muster roll is : (a)day(b)Hour

(c)1 Hour(c)All of these

239. Indent is issued by ;(a)Ordnance Factory Board

(b)Army

(c)GM to Production Section

(d)Production Planning & Control Section

240. Work orders (01 to 02 Series) Consists of : (a)5 Digits(b)9 Digits

(c)10 Digits(c)14 Digits

241. Labour charges which are incurred for converting raw materials into finished products and which can be measured conveniently and accurately are classified as ;(a)Direct Labour Charges

(b)Indirect Labour Charges

(c)Variable Overhead

(d)Labour Overhead

242. Which information is not found in the Piece Work Card ;(a)Ticket Number of the piece worker

(b)Work Order & Warrant Number

(c)Quantity accepted

(d)Extract Number

243. In regard to the pretty casual work or minor internal factory services or repairs and maintenance or for departmental store orders the planning departments releases ;(a)SWOD

(b)Work Order

(c)Warrants

(d)Supplementary Work Order

244. The net expenditure for material for each warrant is posted in the ;(a)Cost card pertaining to the concerned warrant

(b)Work Order

(c)Bill of Material

(d)Extract

245. 01 series of work orders represents : (a)Fixed Overheads


(c)Direct Material

(d)Indirect Material

246. Expenditure relating to salaries contingencies, depreciation etc. which does not appear as labour or material is booked in Cost Accounts by the Accounts Office through ;(a)Allocation Sheet

(b)Final Accounts

(c)Material Abstract


247. Last two digit of the work order number indicate ;(a)Section Code

(b)Factory Code

(c)Work Code

(d)Customer Code

248. Closing of Cost cards is done by :(a)R & E Section

(b)Accounts Office

(c)Works Office

(d)Central Planning Section of the Factory

249. Under the Except System Of Accounting for Components :

(a)Components remain with the Production shop

(b)Compounds are transferred to store Section

(c)Components are shown as semi- finished

(d)None of these

250. In Ordnance Factories workers are paid under two methods only i.e. on Day work and Piece Work.

(a)True

(b)False

(c)There are other methods also

(d)All are correct

251. In case of day worker the overtime is paid on the basis of : (a)Only Basic Pay

(b)Basic Pay + DA

(c)Basic Pay + DA + CCA + Personal Pay etc

(d)Basic Pay + DA + CCA

252. The hourly rate for the overtime is the same for work in Night Shift for Day worker ;(a)True

(b)False

(c)Higher rates are given during Night shift

(d)Lower Rates are given during Night Shit

253. In case of Piece workers no separate payment for O.T. under the departmental rule worked in a day shift is made. They are entitled to piece work earning only.(a)True

(b)False

(c)They are entitled to get both Piece work and O.T

(d)They are entitled to get O.T on single rate

254. Manufacture of a Pilot batch is ; (a)Development Work

(b)Regular Production

(c)Can be treated as Maintenance Work

(d)R & D work

255. For Development work : (a)Separate warrant is issued

(b)No separate warrant is issued

(c)Becomes Part of the regular warrant

(d)After establishing the item , initially higher estimate is prepared to cover the development work

256. Cost Control Procedure is adopted to : (a)To ascertain the cost

(b)To control the cost

(c)To control of direct material and direct labour

(d)All of these

257. O.F.B Budget is passed by :

(a)Parliament

(b)Ministry of Finance

(c)Ministry of Defence

(d)CC of A (Fys.)

258. Life of Warrant is :

(a)1 year

(b)No fixed rule

(c)6 Months

(d)Depends on factory procedure

259. Labour Estimate Contains ; (a)Man hours in Rupees

(b)Man Hours in Hours

(c)Man Hours for whole section

(d)Man hours with material rates

260. Material Estimate does not contain :

(a)Folio No. of Material

(b)Quality of material

(c)Material location

(d)Material list

261. Standard Man Hours (SMH) is : (a)Same as Estimated man Hours

(b)Estimated man Hours + Rest Allowance

(c)Estimated man Hours + 25% allowance for profit

(d)Based on world standard

262. Rejection during production is regularized by issuing ;(a)Semi Statement

(b)Rejection memo

(c)Replacement Order

(d)Additional Warrant

263. Cost of each item produced is complied under the elements ;(a)Direct Labour + Direct Material

(b)Direct Labour + Overheads

(c)Direct Material + Overheads

(d)Direct Labour + Direct Material + Overheads

264. For the purpose of calculation of duty pay and overtime of industrial Employees , Standard working hours are ;(a)48 Hours / week

(b)44.75 Hours / week

(c)51 Hours / week

(d)As per actual hours worked

265. Overtime under department rules is paid to : (a)Day worker

(b)Piece Worker

(c)Both Day Worker & Piece worker

(d)All NIEs

266. If a piece worker is not able to earn his wage , he is supported by ;(a)Idle pay

(b)Guarantee pay

(c)Warrant Adjustment

(d)Gang Work

267. Demand & Returns Notes are priced at : (a)Monthly Average Ledger rate

(b)Current Ledger Rate

(c)Purchase Price

(d)None of these

268. Overhead expenses are : (a)Expenditure on only supervision of Production Shop

(b)Expenditure for providing facilities & Services for Production

(c)Expenditure on material & Labour only

(d)Expenditure on all activities of Production

269. Fixed Overhead is one which is : (a)Fixed every year

(b)Fixed in Rupee Value

(c)Fixed in relation to volume of Production

(d)Fixed in relation to labour value

270. Overheads are charged to the cost of jobs as :

(a)% of Direct Labour

(b)% of Direct Material

(c)Ratio of Direct / Indirect Labour

(d)% of Total Cost of job

271. Overheads are fixed by ;

(a)Ordnance Factory Board

(b)Factory in Consultation with LAO

(c)Planning Office

(d)Local Account Office

272. Actual cost incurred in completing a warrant is :

(a)Known after closing of Accounts

(b)Not Known

(c)Known after closing of Cost Cards

(d)None of these

273. Spot estimate is done for ;(a)Heavy Items

(b)Complicated items

(c)One time jobs

(d)All of these

274. Ours is a Quasi- Commercial Accounting system, which means in Ordnance Factories ;(a)No Profit Loss Statement is prepared

(b)No Balance Sheet is prepared

(c)Profit / Loss & Balance Sheet is prepared

(d)Both (A) & (B) are correct

275. Under the payment of wages Act, 1935 in a Factory , and Industrial Establishment , if number of persons employed is less than one thousand, wage have to paid before expiry of ________ after the last day of the wage period ;(a)10th Day(b)7th Day

(c)3rd Day(c)5th Day

276. Under the Payment of Wages Act, 1936, total amount of deductions should not exceed _______ of wage of the employed person in any wage period if whole or part of the deductions are meant for co- operative societies ;(a)50%(b)75%

(c)90%(c)10%

277. For carrying out additional Labour operations following is given % (a)N.R.R.

(b)Incentives Bonus

(c)Additional over Time

(d)Ex- gratia payment

278. Saturday Bonus is paid to : (a)IEs

(b)NIEs & IEs

(c)IEs & NGOs

(d)All of these

279. Un disbursed amount of IEs payment is deposited into the treasury ;(a)On the last day of the same month

(b)On the last day of the financial year

(c)On the last day of the quarter

(d)On the first day of the following month

280. To allocate all expenditure of service sections, on productions sections which method is used ;(a)Deferred Revenue

(b)Overhead allocation

(c)Step ladder

(d)Budget Allocation

281. To purchase an item from Ord. Fys. SWOD is placed by ;(a)Services other than Army

(b)NAVY

(c)Proof Establishments under Ministry of Defence

(d)Sister Factories

282. Industrial employees paid on the basis of daily attendance only are called ;(a)Direct Workers

(b)Indirect Workers

(c)Day Workers

(d)Maintenance Workers

283. Heavy repairs of plant and machinery which is spread over a number of years is called ;(a)Preliminary Expenses

(b)Fixed Expenses

(c)Deferred Revenue Expenses

(d)Departmental Overheads

284. Payment of Idle Time is admissible to which category or workers (a)Piece workers

(b)NIEs

(c)Maintenance workers

(d)Piece worker & Day Worker both

285. Accounting point of view, Factory is divided into following groups ;(a)Production &

(b)Overhead allocation

(c)Step ladder


286. Accounting point of view, factory is divided into following groups ;(a)Production & Non Production

(b)Production & Administration

(c)Production & Service

(d)Production, Service & Administration

287. Piece workers are paid on the following basis : (a)Attendence

(b)No. of accepted pieces produced

(c)As certified by HOS

(d)Both (A) and (B)

288. Industrial Workers are not admissible for payment for Idle Time due to following cause :(a)Failure of power supply

(b)Break down of Plant & Machinery

(c)Temporary shortage of material

(d)Unions Strike

289. Piece work rate is indicated in : (a)Manufacturing warrant

(b)Material Warrant

(c)Allocation Sheet

(d)All of these

290. Labour Abstract is prepared by ;(a)Labour Bureau

(b)Production Shop

(c)Planning Section

(d)Accounts Office

291. The total earnings of a gang are distributed between the members of the gang in proportion to the nominal time wages of each member based on ;(a)His rate of pay

(b)Minimum of Basic & Attendance

(c)His rate of Pay & attendance

(d)None of these

292. Which is not recorded in the semi statement ;(a)Details of work Order

(b)Details Of Warrants number

(c)Details of quantity of each material

(d)Details of operations not performed

293. Time Study is done for : (a)Finalising the estimates

(b)Trade Test

(c)Jigs & Fixtures

(d)Tool Room items

PART B

There are two alternatives T for True and F for False given against each statement in this part. If T is correct , round on the correct alternative like T. Each question carries 1 Mark.

294. General Manager of the Ordnance Factories have full power to give quotations below the cost of the product in civil trade.TF

295. Productivity Linked Bonus is paid to the employees of O.F. Cell New Delhi also, at par with the Factory employees.TF

296. No departmental overtime is paid to the piece workers.TF

297. Expenditure incurred in the administrative section is apportioned to the production section.TF

298. Time Study is done for Finalizing Estimates.TF

299. Expenditure relating to salaries, Depreciation etc. not appearing as labour or material , is booked in cost accounts through allocation sheet.

TF

300. Authorization for additional Labour operation not provided in Standard estimate is called NRR.TF

301. When a new project is added to an existing factory then expenditure incurred on salaries and other item is carried forward and is called deferred revenue expenditure .lTF

302. While making Semi Statement , details of operation not performed are included.TF

303. Except system in cost accounting is used in case of exceptional unexpected expenditures.

TF

304. Rejection beyond unavoidable rejection (UAR) is regularized through Loss Statement.

TF

305. Under absorption / Over absorption within 5% need not be accounted for ;

TF

306. Cost Card is prepared by Planning Section.

TF

307. Allowances for rest and minor breakdown are inclusive in standard estimate.

TF

308. Punching Media is used for booking payments pertaining to leave pay.

TF

309. The extract issued by OFB for Capital Services under by Factory is classified as Class I

TF

310. Expenditure is relating to overheads is booked in cost accounts through Allocation Sheet.TF

311. Demand / Return Notes are priced on the basis of monthly average rate.TF

312. Straight line method of depreciation is adopted for Plant and Machinery in Ordnance Factory Accounting.

TF

313. If there is a break down of machinery, piece worker can be paid for the lost time under Guarantee wages.

TF

PART C

Attempt 4 (Four ) Questions from this part. Each Question carries 5 marks.314. Write Short Notes on : i.Piece Work Profit

ii.Unit Level Management Committee

315. Write the difference between ;

i.Internal Audit and Test Audit

ii.NRR and NRM

316. Write Short Notes On :

i.Civil Trade

ii.Elements of Wages

317. Write Short Notes on :

i.Incentive Bonus

ii.Injury Bonus

318. Answer the following ;

i.What is Disbursement Certificate ?

ii.Write Briefly the procedure of Absentee payment

PART A


319. Workmen employed in a factory are divided into _______ classes.

(a)1(b)2

(c)3(c)4

320. The following is a classification of worker ;(a)Learner

(b)Trade Apprentice

(c)Entreprenuer

(d)None of these

321. The Wartime workers engaged for meeting production requirements are called ;(a)Men on monthly rates

(b)Trade Apprentice

(c)Learner

(d)Entrepreneur

322. The process of mustering is as an attendance recording system is carried out at ;(a)Gate

(b)TKO (Time keeping Office)

(c)Section

(d)Labour Bureau

323. Casualty reports are prepared based on ;

(a)Ticket Board at Gate

(b)Ticket Board / Box in the Section

(c)By Taking physical attendance

(d)All of these

324. The record of all workmen entering or leaving the factory will be maintained by : (a)Labour Office

(b)Time Keeping Office

(c)Security Office

(d)Labour Bureau

325. Service records of workmen are maintained in form :(a)IAFO 1639 & 1640

(b)IAFO 1680 & 1681

(c)IAFO- 1741 & 1742

(d)KF 74 & 75

326. A roll that is prepared from workmens tickets, overtime notes, Gate passes , Injury report etc is called :

(a)Attendance Roll

(b)Acquaintance Roll

(c)Appraisal Roll

(d)Muster Roll

327. The surprise Checks in sections should be carried out minimum once in ;

(a)A week

(b)A fortnight

(c)A month

(d)A quarter

328. Surprise checks in sections is the absolute authority of ________ and can be delegated ;

(a)Head of Section

(b)Admin Officer

(c)Security Officer

(d)General Manager

329. Day and Piece work records for the shops will be prepared by ________ in prescribed forms.(a)Labour Bureau

(b)Time Office

(c)Accounts Office

(d)Sections

330. Day Work and Piece work cards are issued to the Workmen by ;(a)Accounts Office

(b)Section Office

(c)Planning Office

(d)Warrant Office

331. Furnishing of list of Work Orders to Accounts Office on which the workmen are employed fulfills the requirement of issuance of Work Cards to :

(a)Gang Piece Workers

(b)Individual Piece Workers & Day Workers

(c)Day Workers

(d)Men on Monthly Wages

332. The number of articles or operations passed for payment will be entered in the card duly initiated by :

(a)Line Supervisor

(b)Workmen Himself

(c)Head of Section

(d)Inspection Staff

333. Rejections due to bad material should be indicated on ;

(a)Inspection Notes

(b)View Sheet

(c)Both A and B

(d)None of these

334. Belated payments to the IEs are admissible in the following manner ;(a)Through supplementary payroll in the same month only

(b)Only with the wages of the following month

(c)Both A and B

(d)Allowed in any subsequent month

335. Daily rates of wages sanctioned can be ________ laid down for trade concerned in the schedule of standard wages ;(a)Minimum

(b)Maximum

(c)Within Maximum and Minimum

(d)None of these

336. Whenever a new piece work rate is fixed or an existing rate is revised by the Management, Accounts Officer will see Whether the new or revised rate is financially equitable with relevant reference data ( skill required , operation time, rest intervals and other allowance etc.) during (a)Pre Audit

(b)Post Audit

(c)Both A & B

(d)Neither A Nor B

337. Duty pay is also called ;(a)Time wage

(b)Basic pay

(c)Overtime wage

(d)None of these

338. For day workers governed by the payment of Wages Act 1936, the daily rate of pay is calculated on the basis of following formula ;

No option is given

339. Following is not entitled for payment of paid holidays ;

(a)Piece workers

(b)Partly Piece , partly day worker

(c)Day Worker

(d)None of these

340. The pay for a day for the paid holiday to entitled category is calculated on the basis of daily as below :

341. The piece work earnings of a gang will be distributed among its members in proportion to their Notional Time Wages calculated on the basis of ;342. Disbursement Certificate is prepared in the form : (a)IAFZ 1860(b)IAFZ 1957

(c)IAFZ 1827(c)IAFZ 1929

343. The main purpose of Disbursement Certificate is to ensure ;(a)Depositing undisbursed amount to Govt. Treasury

(b)Balance Money after payment

(c)Depositing Undisbursed amount to strong room

(d)Facilation of absentee payment

344. Overtime Bonus for day workers are admissible as below ;345. The % rate DA / HRA / CCA to be absorbed to cost of production is calculated on the basis of last _______ months in the beginning of each financial year in each shop.(a)3(b)6

(c)9(c)12

346. The difference of actual cost on DA / HRA / CCA and that absorbed to production is called ; (a)Levies

(b)Direct Cost

(c)Indirect Cost

(d)None of these

347. In case of injuries / Sickness not arising out of work , the time spent upto a limit _____ hours at a time will be treated as special leave with wages upto a maximum limit of two occasions in a month ; (a)1(b)2

(c)3(c)4

348. SWOD means ;(a)Supplementary Work Order Demand

(b)Standard Work Order Draft

(c)Standard Work Order Demand

(d)Supplementary Work Order Draft

349. Cost of a product is defined as ;(a)Direct Labour + Direct Material + Work Overhead

(b)Work Cost + Direct Chargeable expenses

(c)Prime Cost + Work Overhead

(d)Direct Labour + Direct Material + Direct Chargeable expenses

350. Works Cost is : (a)Prime Cost + Work Overhead

(b)Direct Labour + Work Overhead

(c)Prime Cost + Work Overhead + Indirect expenses of the administrative sections

(d)None of these

351. Manufacture and Material Warrants are issued based on : (a)Spot Estimates

(b)SWOD

(c)Standard Estimate

(d)Work Orders

352. Work Orders are allotted with Digit Code Numbers ;(a)6(b)7

(c)8(c)9

353. The last two digits of the code number of an Work Order indicate ;(a)Main Work Order

(b)Supplementary Work Order

(c)Particulars of Work

(d)Control Code

354. Syllabus of Work Order is ;(a)A list of Code numbers against various services in the Main Work Order / Classification indentor

(b)List of Codes for particulars of work

(c)List of codes for control

(d)List of codes for warrants

355. Maintenance workers attached to a production section are entitled for Incentive Bonus @ _______ of piece work earned by piece work profit of the section (a)25%(b)30%

(c)50%(c)60%

356. The technique of Marginal Costing is employed while quoting for ______ trade.

(a)Defence(b)PSU

(c)Civil(c)All of these

357. The object of maintaining cost cards is for the purpose of ;

(a)Calculating earning of Piece work

(b)Calculating the Cost of product of an item

(c)Calculating the cost of production of an item

(d)Cost Ascertainment and Cost Control

358. Indicate the work order number which pertains to Brass Foundry ;

(a)03/ 00001/00

(b)03/00002/00

(c)03/00003/00

(d)03/00004/00

359. Electricity charges for electric furnaces are accounted in foundry section in :

(a)Foundry Form I

(b)Foundry Form = II

(c)Foundry Form III

(d)Foundry Form -IV

360. The code serial number for conversion of timber in the Syllabus of Work Order ;

(a)01(b)05

(c)08(c)10

361. In timber seasoning the rate is calculated as per following formula ;(a)

(b)

(c)

(d)

362. Process Account is : (a)A separate account made for each process

(b)Account made for complete process of a product

(c)Account compiling the process cost

(d)None of these

363. Direct Labour booked by the Section for each process is obtained from %(a)Labour Estimate

(b)Process Estimated


(d)Labour Abstract

364. The authority for sanctioning arrear wages for a period exceeding 3 years and not exceeding 6 years is ;(a)General Manager

(b)AGM(Admin)

(c)DGOF

(d)Govt. Of India

365. Under and over absorption of Overhead are due to : (a)Variable overheads

(b)Rates of overheads levied are predetermined

(c)Extra Overtime

(d)Inferior Material

366. An Extract is a Production Order Issued by ;(a)DGOF

(b)General Manager

(c)Planning Office

(d)Services (Army, Navy & Air Force)

367. The authority for Store Holder to Issue material to the sops is called ;(a)Demand Order

(b)Demand Note

(c)Demand Warrant

(d)Demand Voucher

368. Monthly average ledger rate is given by ;369. Non Moving stores are those for which there is no drawal for ;

(a)1 year(b)2 years


370. Issues on payment from stock to parties other than ; Shops , Other Ordnance Factories , Air Force, Navy, Army, Research & Development Organization, MES will be priced as below : (a)Ledger rate + 5% Departmental Charges + Additional 5% on the total of 1st & 2nd Element

(b)Ledger rate + 5% Departmental Charges

(c)Leger rate + Cost of Handling

(d)None of these

371. Package Accounting is : (a)Accounting of packing cases

(b)Accounting of stores in terms of packages without opening

(c)Inspection of stores by opening packages

(d)All of these

372. Rejection during production is regularized by issuing ;(a)Semi Statement

(b)Rejection Memo

(c)Replacement Order

(d)Additional Warrant

373. Ours is a Quasi Commercial Accounting System which means in Ordnance Factories ;(a)No profit loss statement is prepared

(b)No balance sheet is prepared

(c)Profit loss & Balance Sheet is prepared

(d)Both A & B

374. Which information is not found in Piece Work Card ? (a)Ticket number of Piece Worker


(c)Quantity Accepted

(d)Extract Number

375. Payment of Idle Time is admissible to which category of workers ;

(a)Piece Worker

(b)NIEs

(c)Day Worker

(d)Both A & C

376. Tools and Gauges of Standard type of General shop use are manufactured & levied against ;

(a)Fixed Overheads


(c)Direct Material Charges

(d)None of these

377. For booking payment pertaining to leave pay, Holiday Pay, DA & Other Allowances, the A.O Prepares ;

(a)Allocation Sheet

(b)Punching Media

(c)Piece Work Card

(d)Allowance Sheet

378. For carrying out additional Labour Operations _____ is given ;(a)N.R.R

(b)Incentive Bonus

(c)Additional Over Time

(d)Ex-Gratia Payment

PART B

There are two alternatives T for True and F for False given against each statement in this Part. If T is Correct , round on the correct alternative like T. Each question carries 1 Mark.

379. The term workmen & Worker as used in Factories Act are Synonymous.

TF

380. In explosive factories , the workmen are allowed to leave the workspot before the whistle / hooter.TF

381. The daily roll prepared by Gate Office or Labour Bureau is passed on weekly basis to LAO for Audit.

TF

382. The total by the sections in the relevant rolls will be recorded in Accounts Office records under the Labour Section Clerks initial.

TF

383. Issuance of work cards is essential for both Day worker & Piece Worker in all cases.

TF

384. The section / Workshop concerned will enter stage wise rejection in the relevant manufacturing warrant.

TF

385. The total piece work earnings is distributed among the workers of the gang with reference to notional time wages calculated on the basis of maximum of his pay scale.TF

386. O.T. Bonus hours means O.T. Hours beyond 9 hours daily & 48 Hours weekly.TF

387. Piece workers are not entitled for O.T. Bonus upto and within 9 hours daily & 48 Hours weekly.TF

388. Injury Pay beyond 120 days is equal to leave salary during half pay leave.

TF

389. The cost of product is also called Prime Cost.

TF

390. Cost of Product and Cost of Production are the same.

TF

391. Indirect expenses of production / Factory Sections are called work overheads.

TF

392. All SWODs are pre- audited by A.Os.TF

393. Cost Cards for individual items of Manufacture are not necessary.TF

394. Fixed Overheads leviable are absorbed on the current production.TF

395. Transfer Vouchers are used to transfer material to other Work Orders.TF

396. Fixed overhead expense are fully recovered against production.TF

397. Bin Cards maintain the records of each receipt & Issue separately for each item in stock.

TF

398. Departmentalization of overhead expenses are carried out so that overhead charges for each shop can be charged to the output of that particular shop.

TF

PART C


399. Write in details about Disbursement Certificate ?

400. Write Notes on ;

i.Closing of Cost Card

ii.Cost Control Procedure

401. Write Short Notes on :

i.Incentive Bonus

ii.Injury Pay

402. What is ;

i.Muster Roll

ii.Productivity Linked Bonus

iii.Guarantee Pay

iv.Duty Pay

PART A


403. Duty Pay is also Called ;(a)Time wage

(b)Basic Pay

(c)Overtime Wage

(d)None of these

404. Following is not entitled for payment of paid Holidays ;(a)Piece workers

(b)Partly Piece, Partly Day Worker

(c)Day Worker

(d)None of these

405. The pay for a day for the paid holiday to entitled category is calculated on the basis of daily rate as below ;406. Manufacture and Material Warrants are issued based on ;

(a)Spots Estimates

(b)SWOD


(d)Work Orders

407. Syllabus Of Work Order is ;

(a)A list of code numbers against various services in the Main Work Order / Classification Indentor

(b)List of codes for particulars of work

(c)List of codes for controls

(d)List of codes for Warrants

408. The technique of Marginal Costing is employed while quoting for _______ trade.(a)Defence

(b)PSU

(c)Civil

(d)All of these

409. Direct Labour booked by the sections for each process is obtained From %.(a)Labour Estimate

(b)Process Estimate


(d)Labour Abstrat

410. Package Accounting is ;(a)Accounting of packing cases

(b)Accounting of stores in terms of packages without opening

(c)Inspection of stores by opening packages

(d)All of these

411. Work Orders (01 & 02 Series) Consists of ;(a)5 Digits(b)9 Digits

(c)10 Digits(c)14 Digits

412. Last Two digits of the Work Order number indicate ;(a)Section Code

(b)Factory Code

(c)Work Code

(d)Customer Code

413. The hourly rate for the overtime is for work is Night Shift for Day worker ;

(a)Same

(b)Higher

(c)Lower

(d)None of these

414. If a piece worker is not able to earn his wages, he is supported by ;

(a)Idle pay

(b)Guarantee Pay

(c)Warrant adjustment

(d)Gang Work

415. Overheads are fixed by ;(a)Ordnance Factory Board

(b)Factory consultation with LAO

(c)Planning Office

(d)Local Accounts Office

416. Under the Payment of Wages Act, 1936 , total amount of deductions should not exceed _______ of wage of the employed person in any wage period if whole or part of the deductions are meant for co- operative societies ; (a)50%(b)75%

(c)90%(c)10%

417. Saturday Bonus is paid to ;(a)IEs

(b)NIEs & IEs

(c)IEs & NGOs

(d)All of these

418. Un disbursed amount of IEs payment is deposited in the treasury ; (a)On the last day of the same month

(b)On the last day of the financial year

(c)On the last day of the quarter

(d)On the first day of the following month

419. To allocate all expenditures of service sections, on production sections which method is used ? (a)Deferred Revenue

(b)Overhead Allocation

(c)Step - Ladder


420. Piece workers are paid on the following basis ;(a)Attendance

(b)No. of accepted pieces produced

(c)As Certified by HOS

(d)Both (A) & (B)

421. Time Study is done for ;(a)Finalizing the Estimates

(b)Trade Test

(c)Jigs & Fixtures

(d)Tool Room Items

422. Which Category of employee are entitled for Incentive Bonus ? (a)Piece Workers Only

(b)All IEs

(c)All skilled & Semi Skilled Maintenance Workers

(d)All maintenance Workers

423. Under absorption of overheads ;

(a)Is when overhead incurred is more than charged

(b)Is when overhead incurred is less than charged

(c)Shows that overheads estimated are higher than actual incurred

(d)Both (A) & (C) are correct

424. FOH & VOH are charged to cost of a job as ;

(a)Percentage of total Direct Labour

(b)Percentage of total Direct Labour and Direct Material

(c)Percentage of all expenses other than Direct Labour

(d)Fixed value as per Policy

425. The Ledger rate is calculated ;

(a)Afresh , every time a new receipt occurs

(b)At the end of month

(c)Based on weighted average method

(d)Only (A) & (C) are correct

426. Depreciation is a ;

(a)Cash Expenditure

(b)Non Cash Expenditure

(c)Capital Expenditure

(d)None of these

427. Cost incurred on a warrants is reflected in ;(a)Warrant Itself

(b)Books of Accounts

(c)Computers of EDP Section

(d)Cost Card

428. Overtime Payments under Factories Act is admissible for work done ? (a)Beyond 44 hours per week

(b)Beyond 48 hours per week

(c)Beyond 9 hours a day

(d)Beyond 48 hours / week or 9 hours / day

429. Piece Work rate is indicated in ; (a)Manufacturing Warrant

(b)Material Warrant

(c)Allocation Sheet

(d)All of these

430. Industrial Workers are not admissible for payment for Idle Time due to following cause ;(a)Failure of Power Supply

(b)Break down of Plant & Machinery

(c)Temporary Shortage of Material

(d)Unions Strike

431. Guarantee Pay is equal to :

(a)Time wages + OT Pay

(b)

(c)

(d)

432. Direct Material of Significant value can be treated as Indirect Material, If the value does not exceed ____ % of total values.(a)5%(b)2%

(c)1%(c)0.5%

433. As per the Payment of Wages Act 1936, the wage period shall not exceed ;(a)15 days(b)1 month

(c)3 months(c)6 months

434. Priced Store Ledger is maintained by :

(a)Stores Section

(b)Internal Audit Cell

(c)Accounts Office

(d)S.V. Group

435. When rejection in the Warrants is more than the normal rejection percent provided for unavoidable rejection for the items ;

(a)The cost of excess rejection is proportionally added to the total actual expenditure of the warrant

(b)It is deducted from the actual expenditure of the warrant

(c)It is distributed in all the warrants issued by the factory in that financial year

(d)None of these

436. Army places the following document to place an order on Ordnance Factories ;(a)Extract

(b)Purchase Order

(c)Indent

(d)Order From Ministry

437. To purchase an item from Ordnance Factories , SWOD is placed by :(a)Services Other than Army

(b)NAVY

(c)Proof Establishments Under Defence Ministry

(d)Sister Ordnance Factories

438. Which of the following is part of Fixed Overheads : (a)OT Bonus

(b)Wages to IEs

(c)Expenditure on welfare


439. Expenditure other than direct Labour and Direct Material is charged to cost of a job as ;(a)Total Expenditure divided by No. of Jobs

(b)Overhead %

(c)On actual basis

(d)None of these

440. PSL in accounting stands for ;

(a)Principal Store Ledger

(b)Priced Store Ledger

(c)Priced Stock List

(d)Principal Stock Ledger

441. Semi Statement is ;(a)Statement of completed Warrants

(b)Statement of uncompleted Warrants

(c)Annual Accounts

(d)All of these

442. Extracts are of following types ;(a)2(b)3

(c)4(c)5

443. Syllabus of Work Order Part- I contains ;(a)All the Work Orders

(b)All the Work Orders Common to all Factories

(c)All the Work Orders Specific to particular factory

(d)All the above

444. Which information is not found in the Piece Work Card ;(a)Ticket number of the piece worker


(c)Quantity Accepted

(d)Extract Number

445. When a new Factory is planned or new project is added to an existing Factory, expenditure is incurred on salaries and various other miscellaneous items. These charges are carried forward till the production is established. These are called as ;

(a)Preliminary Expenses

(b)Capital Expenditure

(c)Revenue Expenses

(d)Semi Capital Expenses

446. Heavy normal repairs to Plant and Machinery required to maintain their working capacity can be charged to the production during subsequent years are called ;(a)Deferred Revenue Expenditure

(b)Revenue Expenditure

(c)Capital Expenditure

(d)Has to be charged off during the same year.

447. An estimate of direct Labour charges for the ensuring year is prepared by ;(a)Shop Budget Committee

(b)R & E Section

(c)Works Office

(d)Central Budget Committee

448. A Labour Estimate will not have ;(a)Operation Description

(b)Class Of Labour

(c)Operation Time

(d)Job Rate

449. The payment of compensation to a worker under Workmen Compensation Act is made by the ;(a)General Manager

(b)Assistant Labour Commissioner

(c)Addl. Dist. Magistrate of State Govt.

(d)Factories Inspector of State Govt.

PART B

There are two options T for True and F For False given against each statement in this part. If T is correct, round on the correct option like T. Each Question carries 1 Mark.450. Injury pay beyond 120 days is equal to leave salary during half pay leave.TF

451. Fixed Overheads leviable are absorbed on the current production.TF

452. Piece workers are not entitled for O.T Bonus upto and within 9 hours daily & 48 hours weekly.TF

453. The daily roll prepared by Gate Office or Labour Bureau is passed on weekly basis to LAO for audit.TF

454. All SWODs are pre- audited by A.Os.

TF

455. Expenditure relating to salaries, depreciation etc, not appearing Labour or Material , is booked in cost accounts through allocation sheet.TF

456. While making Semi Statement, details of Operations not performed are included.TF

457. Allowances for rest and minor breakdown are inclusive in standard estimate.TF

458. Authorization for additional Labour operation not provided in Standard Estimate is called NRR.TF

459. The method of estimate used for one time / Adhoc jobs is termed as spot Estimate.TF

460. Under absorption / Over absorption within 5% need not be accounted for.TF

461. Cost Card is prepared by planning section.TF

462. Extract Number is not a part of the piece work card.TF

463. Expenditure incurred in the administrative section apportioned to the production Section.TF

464. Process Account is an account made for complete process of a product.TF

465. General Manger is the authority for sanctioning arrear wages for a period exceeding 3 years and not exceeding 6 years.

TF

466. The difference of actual cost on DA / HRA / CCA and that absorbed to production is called Indirect Cost.

TF

467. In case of injuries / Sickness not arising out of work, the time spent upto a limit of 3 hours at a time will be treated as special leave with wages upto a maximum limit of two occasion in a month.

TF

468. Works cost total of Prime Cost and Work Overhead.

TF

PART C


469. What is an Estimate and for what purposes it is utilized ?

470. Write a short Note on Expenses Voucher and Nominal Voucher.

471. What is :

i.Except System of Accounting

ii.Piece Work Profit

472. Explain :i.Syllabus of Work Order

ii.Unit Level Management Committee

GENERAL KNOWLEDGE

473. Who is Delhi Metro Rail Corporation (DMRC) Chief : (a)E. Sreedharan

(b)Tejendara Khanna

(c)Sheila Dikshit

(d)Mangu Singh

Mangu Singh is managing director of Delhi Metro. He took over as managing director after E. Sreedharan, the former managing director, retired from service on 31 December 2011. He is an Indian Railways Service of Engineers officer of the 1981 batch.Wikipedia

474. Which is the only country in the world to opt Magnetic Levitation (Mag-Lev)Technology for Metro Rail ; (a)Russia(b)France

(c)China(c)America

475. Which Non Conventional energy source has been tapped maximum in India ;(a)Solar Energy

(b)Wind Energy

(c)Tidal Energy

(d)Bio mass

476. Pichola Lake is situated in ;(a)Hyderabad

(b)Bhopal

(c)Udaipur

(d)Nainital

477. Mausoleum of Akbar is situated at ;(a)Delhi

(b)Agra

(c)Aurangabad

(d)Fatchpur

478. Junagrah Fort is situated at ;(a)Bikaner

(b)Jaipur

(c)Jaisalmer

(d)Jodhpur

479. Mizoram became a state in ;(a)1987(b)1986

(c)1985(c)1984

Like several other northeastern states of India, Mizoram was previously part of Assam until1972, when it was carved out as a Union Territory. It became the 23rd state of India, a step above Union Territory, on20 February 1987.

480. Right to Information Act was passed in :(a)2005(b)2006

(c)2004(c)None of these

481. Khajuraho temple complex is situated in :(a)Maharashtra

(b)Madhya Pradesh

(c)Uttar Pradesh

(d)Andhra Pradesh

482. Kanha Forest is Situated in : (a)Maharashtra

(b)Andhra Pradesh

(c)Uttar Pradesh

(d)Madhya Pradesh

483. Tansen Musi Festival is celebrated in :(a)Gwalior(b)Jabalpur

(c)Khajuraho(c)Chennai

484. Ronaldnho is a footballer of ;(a)France(b)Germany

(c)Brazil(c)Argentina

485. Kargil War fought in the year ;

(a)1999(b)1998

(c)1997(c)2000

486. Who is higher in rank in Army ;(a)Major General

(b)Lieutenant General

(c)Brigadier

(d)Cornel

487. Where the National Defence College (NDC) is situated ?(a)New Delhi

(b)Dehradun

(c)Secundrabad

(d)Chennia

488. SARAS is :

(a)Light Wight Civilian Transport Aircraft

(b)Advance jet trainer

(c)Pilotness targest aircraft

(d)Multi Barrel rocket Launcher

489. Arjun (MBT) tank is designed in ;(a)India(b)Russia

(c)Israel(c)Czechoslovakia

490. The full form of JCM is ;(a)Joint Consultative Machinery

(b)Joint Committee for Machines

(c)Joint Consultative Membership

(d)None of these

491. As per Factories Act, minimum age to be completed by a child for allowing him to work in a factory is ;(a)16 years(b)14 years


492. The Ultraviolet rays from Sun are prevented from reaching earth by ;(a)Cosmic Layer

(b)Ozone Layer

(c)Troposphere

(d)All of these

493. Who won the World Cup foot ball during 2002 ;(a)Korea(b)Brazil

(c)Germany(c)France

494. Among the following which is the most energy efficient lamp ;

(a)Compact Fluorescent Lamp

(b)Mercury Vapour Lamp

(c)Incandescent Lamp

(d)Sodium Vapour Lamp

495. What is the minimum age required for an Indian citizen to become a member of the Lok Sabha ;

(a)25 years(b)21 years


496. Presently which five year plan is going on ; (a)14th(b)11th

(c)10th (c)12th

497. How many Ordnance Factories are there in Maharashtra ? (a)5(b)8

(c)9(c)10

1Pune3

2Ambarnath2

3Bhusawal2

4Nagapur2

5Bhandara1

10

498. An Indian athlete who was stripped off her medals won in Busan Asian Games on Charges of Drug taking ;(a)Sunita Rani

(b)Malleshwari

(c)Rajeswari

(d)None of these

499. With which game Vishwanathan Anand is associated ;(a)Shooting

(b)Badminton

(c)Chess

(d)Table Tennis

500. As per Industrial Disputes Act, Constitution of Works Committee is a must when ;(a)The number of workmen are more than 100

(b)The number of workmen are more than 1000

(c)The number of workmen are more than 500

(d)The number of workmen are more than 25

501. Bin Laden belongs to which country ; (a)Afganistan

(b)Pakistan

(c)Iraq

(d)Saudi Arabia

502. The full form of ISRO is ; (a)Indian Space Research Organization

(b)International Space Research Organization

(c)International Services Research Organization

(d)International Scientific Research Organization

503. Which is the capital of Andaman and Nicobar Island ;

(a)Dispur(b)Nicobar

(c)Porblair(c)Andaman

504. According to Factories Act 1948 , No worker shall be allowed to work in the Factory for more than _____ days consecutively without a holiday for a whole day ;(a)7 days(b)8 days

(c)9 days(c)10 days

505. Which anniversary was observed in the year 2006 for Terrorist attack on WTC (World Trade Centre).(a)4th (b)5th

(c)6th(c)3rd

506. The first Police Officer in Asia (Kiran Bedi) Won the following Award.(a)Jnanpith Award

(b)Megsaysay Award

(c)Dada Sahib Phlake Award

(d)Rajiv Gandhi Khel Ratna Award

507. =

508. As per Factories Act 1948 , Female employees cant be detained in the factory beyond;

(a)5 PM(b)5 : 30 PM

(c)6 : 00 PM(c)6 : 30 PM

509. In a factory Labour Welfare Commissioner (Welfare Office) is necessary to be appointed if the strength exceeds ;(a)500(b)100

(c)1000(c)1500

510. As per Factories Act 1948, an Occupier shall employ Safety Officer where in Ordinarily number of employees is ;(a)50 or more(b)100 or more

(c)500 or more(c)1000 or more

511. Under the Payment of Wages Act ,wage period should not exceed ;(a)One Year

(b)Half Year

(c)Three Months

(d)One Month

512. Privatisation, Liberalisation and Globalization Policy was started By Govt. Of India in the year ;(a)1991(b)1990

(c)1992(c)1995

513. Ass per Workmens Compensation Act 1923 , the employer shall not be liable to pay compensation in respect of an injury which does not result in the total or partial disablement of the workmen for a period not exceeding ;(a)7 days(b)4 days

(c)3 days(c)5 days

514. Which of the following is a Green House Gas ? (a)Oxygen

(b)Nitrogen

(c)Carbon Dioxide

(d)None of these

515. Which is correct Principle for suitable Development ;(a)Improving the well being of people and meeting the needs of poor in this generation.

(b)Enjoying the fruits of economic development even at the cost of degradation of earths resources and earths environment

(c)To meet current generation needs without compromising the ability of future generations to meet their own needs

(d)None of these

516. Draft National Environment Policy (NEP) of India was Put out in the year ;(a)2004(b)2003

(c)2002(c)2001

517. The Bio Diversity Bill 2000 and Wild life (Protection) Amendment Bill 2002 were passed by the Parliament in ;(a)2002(b)2003

(c)2000(c)2004

518. Environment Clearance is required from Environment Impact Assessment Agency of the State Government by ;(a)Co- Generation Power Plants of any capacity

(b)Development projects under Industrial Sectors

(c)Developmental projects under mining sectors

(d)Development projects under power sectors

519. The Noise pollution affect in an industry is ;(a)Human beings become more irritable

(b)Result in lower efficiency

(c)Increase errors by the workers

(d)All of the these

520. The noise level becomes unbearable and irritating above ;(a)100 dB(b)120 dB

(c)140 dB(c)200 dB

521. As per Motor Vehicle Act of 1988, the noise emanating from must be in accordance with the standard approved by Bureau of Standards ; (a)Horns fitted in the automobiles

(b)Hors fitted in the ambulances

(c)Hors fitted