Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
94
Quantum® Bifold WindowFeatures & Benefits
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014����������� ������ ��� �������� �� ��� �������� � ������ �� �������� �� ��������� �� �����®
������ � ����� ��� �����! ���������" ��� �� ������ � �� ���� ������#��" �$���� � �������� %� �����® ������ � ����� � �����" �� ������� ����%���! ������ �� ����� &��������� ������
95Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014����������� ������ ��� �������� �� ��� �������� � ������ �� �������� �� ��������� �� �����® ������ � ����� ��� �����! ���������" ��� �� ������ � �� ���� ������#��" �$���� � �������� %� �����® ������ � ����� � �����" �� ������� ����%���! ������ �� ����� &��������� ������
Please note that drawings displayed are not to scale
�������������� ����������������
FRAME
�� Robust 102mm semi commercial aluminium window frame, ideal for larger bifolding windows.
SASH
�� 62mm wide window sash section with heights up to 1600mm*.
�� Maximum leaf size is 870mm wide.
*Configurations are open out only.
SILL
�� If no sill is required this option for “servery windows” is available.* *No sill option does not meet water and wind requirements.
GLAZING & ENERGY EFFICIENCY
�� All Trend® Windows and Doors comply with Australian Standards AS1288.
�� Glazing options from 4mm single glazed to 18mm insulated glazed units (IGUs) .
�� Energy efficiency options available to help reduce home energy consumption.
�� All glazing options are Window Energy Rating Scheme (WERS) rated - providing a wide range of energy efficient solutions.
ACOUSTICS
�� Acoustic solutions available for improved noise reduction.
�� High Rw ratings available.
96Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
����������� ������ ��� �������� �� ��� �������� � ������ �� �������� �� ��������� �� �����® ������ � ����� ��� �����! ���������" ��� �� ������ � �� ���� ������#��" �$���� � �������� %� �����®
������ � ����� � �����" �� ������� ����%���! ������ �� ����� &��������� ������
Please note that drawings displayed are not to scale
�������������� ����������������
WIND & WATER RATINGS
�� All Trend® Windows and Doors are designed to meet and surpass 700Pa wind velocity rating and 150Pa water penetration rating and comply with Australian Standards AS2047.
�� Bifold window rated at an air infiltration of 0.67L/s m2.
HARDWARE
�� Infinity Satin Chrome hardware supplied as standard.�� Optional colours available are:
- Pearl White - Stone Beige - Anodic Natural Matt - Gloss Black
�� Durable stainless steel hinges available as standard.�� Window locks can be keyed alike to other Quantum® products
for ease of use.
OPTIONS
�� Glazing options also available in bar layout styles:- Colonial- Federation - Ovolo glazing bar style*
�� Wide range of powdercoated colours.�� Customised WERS ratings.�� Variety of sizes and custom made options available.�� Variety of configuration options available.
*Ovolo only available in single glazing.
DELIVERY
�� Protective wrapping for delivery to site comes standard for all Quantum® products.
97
98
Quantum® Bifold Window
Installation
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014����������� ������ ��� �������� �� ��� �������� � ������ �� �������� �� ��������� �� �����®
������ � ����� ��� �����! ���������" ��� �� ������ � �� ���� ������#��" �$���� � �������� %� �����® ������ � ����� � �����" �� ������� ����%���! ������ �� ����� &��������� ������
99Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014����������� ������ ��� �������� �� ��� �������� � ������ �� �������� �� ��������� �� �����® ������ � ����� ��� �����! ���������" ��� �� ������ � �� ���� ������#��" �$���� � �������� %� �����® ������ � ����� � �����" �� ������� ����%���! ������ �� ����� &��������� ������
Please note that drawings displayed are not to scale
OUTSIDE
SOFFIT LININGTIMBER REVEAL
HEADER12mm CLEARANCE
TIMBER ARCHITRAVE BY BUILDER
FIXINGS AT 450mm CENTRES
PACKING BY BUILDER
FLASHINGBY BUILDER
SILL FLAP
BRICK SILLSILL PLATE
SILL SUPPORTBY BUILDER
QUAD BYBUILDER
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
10mm MINIMUM CLEARANCE BETWEEN SILL BRICK AND WINDOW SILL WHERE TIMBER FRAME IS USED
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
TIMBER REVEAL
HEAD
SILL
FLASHINGBY BUILDER
65
101.6
NO PACKING
47.7
101.6
STUD OPENING = FRAME SIZE + 60mm
FRAME SIZE
FLA
SHIN
G B
Y B
UIL
DER
BR
ICK
WO
RK
TIM
BER
REV
EAL
STU
DST
UD
JAM
B
FIXI
NG
S AT
45
0mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
101.6
35
FIXING BY BUILDER
Building In Detail | Brick Veneer - 240mm wall
Bifold Window - Installation
INSTALLING FRAME CORRECTLY
�� Fit flashing to window surround (refer to drawing below).
�� Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
�� Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
�� Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
�� Header beam should be at least 12mm clear of window frame.
�� Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
�� To ensure the satisfactory long term performance of window, install sill support (refer to drawings below).
�� Build-in 3mm camber to head.�� Bifolds top-hung - beam must support weight.
100Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
����������� ������ ��� �������� �� ��� �������� � ������ �� �������� �� ��������� �� �����® ������ � ����� ��� �����! ���������" ��� �� ������ � �� ���� ������#��" �$���� � �������� %� �����®
������ � ����� � �����" �� ������� ����%���! ������ �� ����� &��������� ������
Please note that drawings displayed are not to scale
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
SILL FLAP
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FRA
ME
SIZE
CEM
ENT R
END
ERC
EMEN
T REN
DER
101.6
SILL
47.7
65
101.6
HEAD
CAVITY FIXING BLOCK
FIXING BY BUILDER
BR
ICK
WO
RK
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ESFL
ASH
ING
BY
BU
ILD
ER
FRAME SIZE
CEMENT RENDER
BR
ICK
WO
RK
BRICK OPENING = FRAME SIZE + 3mm
101.6
JAM
B
35
OUTSIDE
Building In Detail | Double Brick - 280mm wall
Bifold Window - Installation
INSTALLING FRAME CORRECTLY
�� Fit flashing to window surround (refer to drawing below).
�� Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
�� Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
�� Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
�� Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
�� Build-in 3mm camber to head.�� Bifolds top-hung - beam must support weight.
101Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014����������� ������ ��� �������� �� ��� �������� � ������ �� �������� �� ��������� �� �����® ������ � ����� ��� �����! ���������" ��� �� ������ � �� ���� ������#��" �$���� � �������� %� �����® ������ � ����� � �����" �� ������� ����%���! ������ �� ����� &��������� ������
Please note that drawings displayed are not to scale
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
SILL FLAP
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FRA
ME
SIZE
CEM
ENT R
END
ERC
EMEN
T REN
DER
101.6
SILL
47.7
65
101.6
HEAD
CAVITY FIXING BLOCK
FIXING BY BUILDER
OUTSIDE
BUILDING IN LUGS
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
CEMENT RENDER
BR
ICK
WO
RK
BRICK OPENING = FRAME SIZE + 3mm
101.6
JAM
B
35
BU
ILD
ING
IN L
UG
S
FIXING AT450mm CENTRES
FIXI
NG
AT
450m
m C
ENTR
ES
Building In Detail | Double Brick - 280mm wall | Prepared Opening
Bifold Window - Installation
INSTALLING FRAME CORRECTLY
�� Fit flashing to window surround (refer to drawing below).
�� Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
�� Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
�� Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
�� Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
�� Build-in 3mm camber to head.�� Bifolds top-hung - beam must support weight.
102Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
����������� ������ ��� �������� �� ��� �������� � ������ �� �������� �� ��������� �� �����® ������ � ����� ��� �����! ���������" ��� �� ������ � �� ���� ������#��" �$���� � �������� %� �����®
������ � ����� � �����" �� ������� ����%���! ������ �� ����� &��������� ������
Please note that drawings displayed are not to scale
TIMBER REVEAL
TIMBER REVEAL
HEADER
WALL CLADDING
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
NO PACKING
FLASHING BY BUILDER
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
12mm CLEARANCE
TIMBER ARCHITRAVE BY BUILDER
SILL PLATE
FLASHING BY BUILDER
ALUMINIUM OR VINYLWALL CLADDING
SILL FLAP
PACKING BY BUILDER
FIXINGS AT 450mm CENTRES
HEAD
101.6
65
FIXING BY BUILDER
101.6
SILL
47.7
TIM
BER
REV
EAL
STU
D
STU
D
WALL CLADDING
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
CA
ULK
ING
FIXI
NG
S AT
45
0mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
101.6
35
JAM
B
OUTSIDE
Building In Detail | Cladding on Studwall
Bifold Window - Installation
INSTALLING FRAME CORRECTLY
�� Fit flashing to window surround (refer to drawing below).
�� Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
�� Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
�� Header beam should be at least 12mm clear of window frame.
�� Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
�� To ensure the satisfactory long term performance of windows, install sill support (refer to drawings below).
�� Build-in 3mm camber to head.�� Bifolds top-hung - beam must support weight.
103Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014����������� ������ ��� �������� �� ��� �������� � ������ �� �������� �� ��������� �� �����® ������ � ����� ��� �����! ���������" ��� �� ������ � �� ���� ������#��" �$���� � �������� %� �����® ������ � ����� � �����" �� ������� ����%���! ������ �� ����� &��������� ������
Please note that drawings displayed are not to scale
OUTSIDE
SUBSILL
RENDER BY BUILDER
SILL
HEAD
BLOCKWORK(SEALED OR PRETREATED BY BUILDER
AS PER BLOCKWORK SUPPLIER’S SPECIFICTION - TO PREVENT WATER PENETRATION)
BLO
CK
WO
RK
(SEA
LED
OR
PR
ETR
EATE
D B
Y B
UIL
DER
AS
PER
BLO
CK
WO
RK
SU
PPLI
ER’S
SPE
CIF
ICTI
ON
- TO
PR
EVEN
T W
ATER
PEN
ETR
ATIO
N)
FRAME SIZE
BLOCKWORK OPENING = FRAME SIZE + 20mm
FIXI
NG
450
CEN
TRES
AN
GLE
TR
IM B
Y B
UIL
DER
ANGLE TRIM BY BUILDERFI
XIN
G 4
50 C
ENTR
ES
REN
DER
BY
BU
ILD
ER
REN
DER
BY
BU
ILD
ER
FIXING 450 CENTRES
PACKER
FIXING 450 CENTRES
FIXING 450 CENTRES
FRA
ME
SIZE
BLO
CK
WO
RK
OPE
NIN
G =
FR
AM
E H
EIG
HT
+ 40
mm
PACKERSEALANT
101.6
65.0
61.7
35
101.6
Bifold Window - InstallationBuilding In Detail | Blockwork
INSTALLING FRAME CORRECTLY
�� Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Blockwork Opening:Height = Frame Size + 40mmWidth = Frame Size + 20mm
�� Fit subframe to opening and seal fixings.�� Seal ends of subsill with angle.�� Fit window to subframe (screw or pop-rivet).�� Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
�� Build-in 3mm camber to head.�� Bifolds top-hung - beam must support weight.
104Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
����������� ������ ��� �������� �� ��� �������� � ������ �� �������� �� ��������� �� �����® ������ � ����� ��� �����! ���������" ��� �� ������ � �� ���� ������#��" �$���� � �������� %� �����®
������ � ����� � �����" �� ������� ����%���! ������ �� ����� &��������� ������
Please note that drawings displayed are not to scale
OUTSIDE
TIMBER REVEAL
FLASHINGBY BUILDER
HEBEL POWER PANEL
SILL SUPPORTBY BUILDER
SILL PLATE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FRA
ME
SIZE
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SOFFIT LINING
TIMBER ARCHITRAVE BY BUILDER
TIMBER REVEAL
FLASHINGBY BUILDER
HEADER
PACKINGBY BUILDER
FIXINGS AT450mm CENTRES
FIXINGS AT450mm CENTRES
HEAD
SILL
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
STU
DST
UD
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
PAC
KIN
GB
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
TIM
BER
REV
EAL
JAM
B101.6
47.7
65
35
101.6
Building In Detail | Hebel Power Panel
Bifold Window - Installation
INSTALLING FRAME CORRECTLY
�� Fit flashing to window surround (refer to drawing below).
�� Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
�� Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
�� Caulk between render and frame.�� Header beam should be at least 12mm clear of
window frame.�� Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
�� To ensure the satisfactory long term performance of windows, install sill support (refer to drawings below).
�� Build-in 3mm camber to head.�� Bifolds top-hung - beam must support weight.
105
106
Quantum® Bifold Window
Cross Sectional Views
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014����������� ������ ��� �������� �� ��� �������� � ������ �� �������� �� ��������� �� �����®
������ � ����� ��� �����! ���������" ��� �� ������ � �� ���� ������#��" �$���� � �������� %� �����® ������ � ����� � �����" �� ������� ����%���! ������ �� ����� &��������� ������
107Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014����������� ������ ��� �������� �� ��� �������� � ������ �� �������� �� ��������� �� �����® ������ � ����� ��� �����! ���������" ��� �� ������ � �� ���� ������#��" �$���� � �������� %� �����® ������ � ����� � �����" �� ������� ����%���! ������ �� ����� &��������� ������
Please note that drawings displayed are not to scale
Two Lite
73.0 73.028.6 28.6
50.07.0
65.0
48.0
47.7
30.0
60.0
35.035.0
16.0
35.0
16.0
outside outside
Bifold Window - Cross Sectional View
108Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
����������� ������ ��� �������� �� ��� �������� � ������ �� �������� �� ��������� �� �����® ������ � ����� ��� �����! ���������" ��� �� ������ � �� ���� ������#��" �$���� � �������� %� �����®
������ � ����� � �����" �� ������� ����%���! ������ �� ����� &��������� ������
Please note that drawings displayed are not to scale
Two Lite | Double Glazed
73.0 73.028.6 28.6
50.0
7.0
65.0
48.0
47.7
103.3
30.0
60.0
18.0
35.035.0
16.016.0
outside outside
Bifold Window - Cross Sectional View