Upload
m-dimas-adiwiguna
View
217
Download
0
Embed Size (px)
Citation preview
8/9/2019 Quality Control Fiber Optic At
1/32
AKADEMI TELKOM JAKARTA
8/9/2019 Quality Control Fiber Optic At
2/32
CHAPTER I INTRODUCTION
Background Of Research
Purpose Of Research
Problem Definition
Limitation Problem
CHAPTER II COMPANY PROFILE
CHAPTER III FIBER OPTIC
Characteristics of Fiber Optic
Types Of Fiber Optic
QCactivity in PT.Furukawa
CHAPTER IV ISSUES / CONSTRAINTS and RESOLUTION
CHAPTER V CONCLUSION
8/9/2019 Quality Control Fiber Optic At
3/32
Background Of Research :1. Bandwidth demand is increasing.2. Fiber-optic technology that continues to grow.3. Quality of optical fiber used must meet the standard needs of consumers.4. Needed a system that controls the quality of fiber in the production of optical
fiber.
8/9/2019 Quality Control Fiber Optic At
4/32
1. Enhance professional attitudes of students to enter the world of work inaccordance.
2. Increase new knowledge and experience in the working world, especially in thefield of telecommunications.
3. Expected to understand and apply the knowledge / lessons learned from thecampus or from supervising the field.
4. Themselves for students to know the atmosphere of the workplace environment
8/9/2019 Quality Control Fiber Optic At
5/32
Activity in the QC is performed during the period
of PKL
8/9/2019 Quality Control Fiber Optic At
6/32
In this report author PKL limit the scope of theproblem or writing on matters concerning :1. Discuss about activities performed during theperiod of PKL at PT. Furukawa.
8/9/2019 Quality Control Fiber Optic At
7/32
Furukawa was established in May 2001 and is the largest fiberoptic company in Indonesia. The company had assets of about5.5 million U.S. dollars, and 100% of its shares currentlyowned by Furukawa Electric. Furukawa has very goodcredibility in the production of fiber optic cable in Indonesia and
southeast asia.
8/9/2019 Quality Control Fiber Optic At
8/32
8/9/2019 Quality Control Fiber Optic At
9/32
8/9/2019 Quality Control Fiber Optic At
10/32
Snellius law
8/9/2019 Quality Control Fiber Optic At
11/32
8/9/2019 Quality Control Fiber Optic At
12/32
8/9/2019 Quality Control Fiber Optic At
13/32
8/9/2019 Quality Control Fiber Optic At
14/32
8/9/2019 Quality Control Fiber Optic At
15/32
8/9/2019 Quality Control Fiber Optic At
16/32
8/9/2019 Quality Control Fiber Optic At
17/32
8/9/2019 Quality Control Fiber Optic At
18/32
8/9/2019 Quality Control Fiber Optic At
19/32
8/9/2019 Quality Control Fiber Optic At
20/32
8/9/2019 Quality Control Fiber Optic At
21/32
8/9/2019 Quality Control Fiber Optic At
22/32
1. Measurement Attenuation
Tools needed to measure Attenuation include:1.OTDR (Optical Time Domain Reflectometer)
2.Pig Tail3.Coating Stripper4.Alkohol and Tissue
8/9/2019 Quality Control Fiber Optic At
23/32
8/9/2019 Quality Control Fiber Optic At
24/32
Tools and Materials:
1.PK s18
2.Pig tail
3.Fiber cleaver
4.Coating stripper
5. Conector
6.Alcohol and Tissue
8/9/2019 Quality Control Fiber Optic At
25/32
8/9/2019 Quality Control Fiber Optic At
26/32
1.Torsion Tester (Cable will be rotated 360 degrees with torsion machinetester)
2.Impact Tester (Fiber Optic Cable will be ground with a specific load)
3.Bending Tester (tester cycling will play for180 degrees of fiber optic cable)
4.Crush Tester (fiber optic cable will be a force of2200 N for30 minutes)
8/9/2019 Quality Control Fiber Optic At
27/32
8/9/2019 Quality Control Fiber Optic At
28/32
1. High Attenuation
2. Loss of signal
3. Bending
8/9/2019 Quality Control Fiber Optic At
29/32
8/9/2019 Quality Control Fiber Optic At
30/32
8/9/2019 Quality Control Fiber Optic At
31/32
1. Fiber Optic cable is the transmission medium that has a very high speed and can used to build
the back bone network.
2. Parameters that affect the quality of optical fiber include: attenuation, dispersion, PMD, andMFD.
3. Needed a Quality Control / Assurance forHereinafter producing fiber optic cable so thatresulting quality is very good.
4. Necessary steps are appropriate to deal with fiber optic cable that has problem when theproduction process going on, so the production cost can be reduced as small as possible.
8/9/2019 Quality Control Fiber Optic At
32/32
WassalammualaikumWr.Wb.