1
Single SKU Power Performance Size Time to launch Optimized system solution for worldmode LTE RF POP Power Amp & Antenna Switch Envelope Power Tracker Antenna Matching Tuner Performance Design Efficiency Reduced power Reduced size Improved throughput Global LTE coverage Time to launch Power Amp Ant. Switch QFE23xx Power Amp & Antenna Switch QFE27xx RF POP © 2013 Qualcomm Technologies, Inc. All rights reserved. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. RF POP is a trademark of Qualcomm Incorporated. Qualcomm RF360 and RF POP are products of Qualcomm Technologies, Inc. All Qualcomm Incorporated marks are used with permission. *As compared to the previous Qualcomm RF solution. Fewer SKUs Customizable bands Integrated design Fast time-to-market One simple design Up to Signal 27xx 30% Wasted energy APT mode - Average power tracker 0% Wasted energy ET mode - Envelope power tracker Signal Qualcomm ® RF360 Front End Solution Truly global. Entirely integrated. Easily customizable. QFE11xx Envelope Power Tracker Advantage: integration Integrating the Power Amp and Antenna Switch using a CMOS process means a smaller PCB area, ease of routing and component count savings. Going vertical Innovative 3D-RF packaging allows OEMs to change the substrate configuration to support global or region specific band combina- tions. Enables a highly integrated multiband, multimode, single-package RF front-end solution that’s truly global. Worldmode 2G/3G/4G support on a single chip with an all mode, multiband solution— an industry first. Customizable bands RF POP The solution Delivering one global design With the Qualcomm RF360 solution, OEMs can create a single multimode design for worldwide LTE mobility. The problem 4G LTE band fragmentation Multiple versions of the same LTE device are required to accommodate the worldwide proliferation of cellular bands—40 already and counting. The advantage Integration at the system level OEMs can design thinner, battery friendly devices that deliver higher performance using less power, and that are capable of supporting all modes and all bands, worldwide. Processor Modem RFIC PMIC RF POP Power Amp & Antenna Switch Antenna Matching Tuner Band Envelope Power Tracker Band Band Band Band Band Qualcomm RF360 Half the size* Antenna matching made easy Improves perfor- mance in ultra-thin smartphones while operating over 2G/3G/4G LTE radio frequency bands, from 700-2700 MHz. More bars. More coverage. Dynamic antenna matching in the presence of physical impediments, like the user’s hand, allows for consistent signal strength and improved talk time. QFE15xx Antenna Matching Tuner Unprecedented efficiency Groundbreaking thermal reductions in heat and major improvements in power con- sumption for thinner form factors and more powerful devices. To learn more visit qualcomm.com/rf-solutions One solution designed for: All modes. All bands.

Qualcomm Rf360 Front End Solution Infographic

Embed Size (px)

DESCRIPTION

qualcomm

Citation preview

Page 1: Qualcomm Rf360 Front End Solution Infographic

Single SKU Power Performance Size Time to launch

Optimized system solution for worldmode LTE

RF POP

Power Amp &Antenna Switch

EnvelopePower Tracker

AntennaMatching Tuner

Performance Design E�iciency

Reducedpower

Reducedsize

Improvedthroughput

Global LTEcoverage Time to

launch

Power Amp

Ant. Switch

QFE23xxPower Amp & Antenna Switch

QFE27xxRF POP™

© 2013 Qualcomm Technologies, Inc. All rights reserved. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. RF POP is a trademark of Qualcomm Incorporated. Qualcomm RF360 and RF POP are products of Qualcomm Technologies, Inc. All Qualcomm Incorporated marks are used with permission.

*As compared to the previous Qualcomm RF solution.

Fewer SKUsCustomizable

bandsIntegrated

design Fast

time-to-market

One simple design

Up to

Signal27xx

30% Wasted energy

APT mode - Average power tracker

0% Wasted energy

ET mode - Envelope power tracker

Signal

Qualcomm® RF360 Front End SolutionTruly global. Entirely integrated. Easily customizable.

QFE11xxEnvelope Power Tracker

Advantage:integrationIntegrating the Power Amp and Antenna Switch using a CMOS process means a smaller PCB area, ease of routing and component count savings.

Going verticalInnovative 3D-RF packaging allows OEMs to change the substrate configuration to support global or region specific band combina-tions. Enables a highly integrated multiband, multimode, single-package RF front-end solution that’s truly global.

Worldmode2G/3G/4G support on a single chip with an all mode, multiband solution—an industry first.

Customizablebands

RF POP

The solutionDelivering one global designWith the Qualcomm RF360 solution, OEMs can create a single multimode design for worldwide LTE mobility.

The problem4G LTE band fragmentation Multiple versions of the same LTE device are required to accommodate the worldwide proliferation of cellular bands—40 already and counting.

The advantageIntegration at the system levelOEMs can design thinner, battery friendly devices that deliver higher performance using less power, and that are capable of supporting all modes and all bands, worldwide.

ProcessorModem

RFICPMIC

RFPOP™

Power Amp & Antenna

Switch

AntennaMatching

Tuner

Band

EnvelopePower

Tracker

Band Band

Band Band Band

Qualcomm RF360

Half the size*

Antenna matching made easyImproves perfor-mance in ultra-thin smartphones while operating over 2G/3G/4G LTE radio frequency bands, from 700-2700 MHz.

More bars. More coverage.Dynamic antenna matching in the presence of physical impediments, like the user’s hand, allows for consistent signal strength and improved talk time.

QFE15xxAntenna Matching Tuner

Unprecedented e�iciencyGroundbreaking thermal reductions in heat and major improvements in power con-sumption for thinner form factors and more powerful devices.

To learn more visit qualcomm.com/rf-solutions

One solutiondesigned for:

All modes.All bands.