Embed Size (px)
Citation preview
14.5"
8.00
"
WH White ( Standard ) BK Black Powder Coat Finish
Prim. V Sec. V
QTM-eLED UNV 24DIM OptsSizeModel
+
2 Primary Voltage
UNV: 120-277 Vrms
3 Secondary Voltage 12VDC 24VDC
0-10V
Max Prim. @ 277V1 Size Max Load
(Watts)Max Prim.
Amps @ 120VMax Prim.
Amps @ 277VSecondary
Voltage(12/24VDC)
4 Dimmer
5 Options
QTM-eLED-100-UNV/24+0-10V
Ordering Example
ORDERING GUIDE
QTM-eLED
© 2017, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com 1
PROJECT NAME DATE TYPE NOTE
2017.V01
COMPANY
0.86"
4.00
"
HOUSING● 18 gauge Welded Steel Enclosure: 14.5"W x 8.00"H x 4.00"D● Door: 15.5"W x 9.00"H● Knockouts: 21● Built-in support bracket incorporated to secure housing for surface mounting
FEATURES● Limited output voltage and current, plus isolation for safe operation ● Dimmable w/ additional 0-10V Dimming Module● Fully potted driver(s) for moisture resistance● Suitable for dry and damp locations ● Suitable for surface or recessed mounting use● Primary Voltage - Universal (120-277V )● Wide operating temperature range: -4ºF ~ +104ºF● Fits up to (3): 60W 12VDC or (3):100W 24VDC driver(s) and 0-10V dimming module(s) in the same housing● 5 year warranty● Driver has Class A sound rating● Class 2 Output ● CSA #239924 Low Voltage Lighting Systems : CSA Class 3425-15 and Class 3425-95 : CSA Standard C22.2 No. 250.0-08 - Luminaires : ANSI/ UL Standard 2108 - Low Voltage Lighting Systems : CSA Std C22.2 No 250.13-14 - Light Emitting Diode (LED) Equipment for Lighting Applications : ANSI/ UL Standard 8750 - Light Emitting Diode (LED) Equipment for Use in Lighting Products
WIRE LENGTH TABLE
*Distances are based on a 5% Voltage drop max.● This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.● If dimming with optional 0-10V dimming module, use a dimmer rated for 0-10V operation.
VDC10 AWG 12 AWG 14 AWG 16 AWG 18 AWG 20 AWG 22 AWG 24 AWG 26 AWG(5.6mm2) (3.3mm2) (3.0mm2) (1.3mm2) (0.78mm2) (0.50mm2) (0.33mm2) (0.20mm2) (0.13mm2)
7’
4’ 3’
22’14’7’3’
22’12’5’
35’56’88’35’55’88’140’223’
141’224’122’51’ 32’
77’ 48’ 30’ 30’
21’33’82’53’
20’ 13’ 8’13’ 8’ 5’ 3’
356 ’567’309’130’84’
194’
355’564’897’
12’19’31’49’78’125’
45’ 28’ 18’ 11’ 7’
198’
72’
315’
115’7’ 4’ 3’
12
2560
17254080100
12
24
(W)
VOLTAGE DROP CHART
QTM-eLED is Q-Tran’s interior rated electronic power supply, utilizing the Xitanium driver from Advance. Suitable for surface or recessed mounting use. These drivers provide a 12VDC or 24VDC, constant voltage output, with optional 0-10V dimming modules.
9 Knockouts of 0.86" Hole for 3/4" fitting
TOP
TRA
Y
0 - 1
0VDI
M-MO
D 1
0 - 1
0VDI
M-MO
D 1
0 - 1
0VDI
M-MO
D 1
1x60W 12VDC12VDC12VDC
24VDC24VDC24VDC
0.9 A1.4 A2.0 A
1.1 A2.2 A3.4 A
2x60W0.4 A0.6 A0.9 A
0.5 A1.0 A1.5 A
3x60W
1x100W 2x100W3x100W
60W120W180W
100W200W300W
BO
TTO
M T
RA
Y PRIM
ARY
SECO
NDAR
Y
LED
DRIV
ER 2
(12
0V -
277V
)LE
D DR
IVER
1 (
120V
- 27
7V)
LED
DRIV
ER 3
(12
0V -
277V
) NEU
GND
HOT
++
--
++
--
© 2017, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com
QTM-eLED
SPECIFICATIONS
2
12VDC 24VDC
SPECIFICATIONS
Input▪ Input Voltage (Vrms)▪ Input current, max (Arms)▪ Inrush Current, max* (Apk)▪ Input Frequency▪ Input Power (W)
Output▪ Output Voltage, nom (V)▪ Output Current (A)▪ Output Power (W)▪ Dimming 0-10V, max
Environmental▪ THD (%) ▪ PF (%) ▪ Case Temp (°C)
1200.58
125.060
244.1100
1200.9845
2300.5190
2770.42100
50/6070
2mA
50/60117
2300.30
2770.25
*- 200us event
Protections▪ Short Circuit Protection (SCP)▪ Overload Protection (OLP)▪ Class 2 Output
Compliance▪ EMI Spec : FCC 47 Part 15 : CISPR 15 : CISPR 22 Class A
▪ : UL-2108 : UL-8750 : CSA C22.2 No 250.13-14 : CSA C22.2 No 250.0-08
----0.90----
------------
20----90
----0.90----
------------
20----90
Min Nom Max Min Nom Max
12VDC 24VDC
PERFORMANCE▪ Power Supply : Rated for surface mount or recessed use : Fully rated to operate low voltage load at listed wattage (No Derating Required) : Voltage regulation to 5% or less of rated output voltage : The ability to be dimmed using 0-10V Dimming : Universal input range of 120-277 Vrms Low Voltage Lighting Systems : CSA Class 3425-15 and Class 3425-95 : Short circuit protection (SCP) : Overload protection (OLP) : Live tested by manufacture to ensure proper operation : Manufactuer offers minimum of 5 year warranty▪ Terminal blocks is made of tin plated copper with a voltage rating of 300V and a current rating of 40A
---- ---- ----
© 2017, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com
0
20
40
60
80
100
120
25 30 35 40 45 50 55 60 65 70 75 80 85 90
Life
Tim
e (k
Hrs
)
Case Temperature (ºC)
Life Time vs. Case Temperature
9085
80757065
6055
500 20 40 60 80 100
20 40 60 80 100
Effici
ency
(%)
% Rated Load
Efficiency, 12VDC
120Vrms 277Vrms
Output Current (A)120Vrms 277Vrms
Output Current (A)120Vrms 277Vrms
% Rated Load120Vrms 277Vrms
11.4
11.6
11.8
12
12.2
0 1 2 3 4 5 6
Out
put V
olta
ge (V
)
Vout vs. Iout, 12VDC
100
90
80
70
60
500
Effici
ency
(%)
Efficiency, 24VDC
23.423.523.623.723.823.9
2424.124.2
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5
Out
put V
olta
ge (V
)
Vout vs. Iout, 24VDC
QTM-eLED
SPECIFICATIONS
3
