J "C" (FOR -RT1 OPTION) .075 1.91 (PTH TYP) (FOR -RT1 OPTION) TO BE SOLDERED USING PASTE-IN-HOLE TECHNOLOGY .031 0.80 (PTH TYP) (FOR -L OPTION) (TO BE SOLDERED USING PASTE-IN-HOLE TECHNOLOGY) "D" (FOR -L OPTION) "B" (FOR -LC & -A OPTION) .0120 (TYP) 0.305 .025 (TYP) 0.64 .057 (TYP) 1.45 .185 (TYP) 4.70 (2 PLCS PER BANK) .100 (TYP) 2.54 (2 PLCS PER BANK) "F" (NPTH TYP) (FOR -LC & -A OPTION) .080 2.03 .279 7.08 (FOR -RT1 ONLY) .1015 2.578 (FOR -L OPTION) .042 1.05 .0783 1.989 .5710 (TYP) 14.503 .7875 (TYP) 20.003 .665 (TYP) 16.89 .0197 (TYP) 0.500 .2075 5.271 (TYP) .250 (TYP) 6.35 .7875 (TYP) 20.003 .047 (TYP) 1.19 .1215 3.086 (TYP) "A" REF (SEE NOTE 2) "E" REF (SEE NOTE 2) 01 02 C L C L NOTES: 1. ALL DIMENSIONS ARE SYMMETRIC ABOUT THE CENTERLINE. 2. CONNECTOR ENVELOPE DIMENSIONS, OTHER COMPONENTS PLACED ON PCB SHALL AVOID THIS ZONE. 3. FOR -SD/-DS OPTIONS, PLEASE REFER TO THE "XQXX WITH SCREW-DOWN OPTIONS" APPLICATION DRAWING. FIG 1 FOOTPRINT FOR QTH-060-01-X-D-XXX SHOWN SHEET OF RECOMMENDED PCB LAYOUT FOR QTH-XXX-XX-X-D-XXX PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. 2 1 REVISION J F:\DWG\MISC\Mktg\Footprnt\qth-xxx-xx-x-d-xxx-footprint.slddrw 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322

Qth Xxx Xx x d Xxx Footprint

Download PDF Report

Upload
leslie-stewart
View
31
Download
1

Embed Size (px)

Citation preview

J

"C"(FOR -RT1 OPTION)

.075 1.91(PTH TYP)

(FOR -RT1 OPTION)TO BE SOLDERED USING

PASTE-IN-HOLE TECHNOLOGY

.031 0.80(PTH TYP)

(FOR -L OPTION)(TO BE SOLDERED USING

PASTE-IN-HOLETECHNOLOGY)

"D"(FOR -L OPTION)

"B"(FOR -LC & -A OPTION)

.0120 (TYP)0.305

.025 (TYP)0.64

.057 (TYP)1.45

.185 (TYP)4.70(2 PLCS PER BANK)

.100 (TYP)2.54(2 PLCS PER BANK)

"F"(NPTH TYP)(FOR -LC &-A OPTION)

.080 2.03

.279 7.08(FOR -RT1 ONLY)

.1015 2.578(FOR -L OPTION)

.042 1.05

.0783 1.989

.5710 (TYP)14.503

.7875 (TYP)20.003

.665 (TYP)16.89

.0197 (TYP)0.500

.2075 5.271(TYP)

.250 (TYP)6.35

.7875 (TYP)20.003

.047 (TYP)1.19

.1215 3.086(TYP)

"A" REF(SEE NOTE 2)

"E" REF(SEE NOTE 2)

01

02

CL

CL

NOTES:1. ALL DIMENSIONS ARE SYMMETRIC ABOUT THE CENTERLINE.2. CONNECTOR ENVELOPE DIMENSIONS, OTHER COMPONENTS PLACED ON PCB SHALL AVOID THIS ZONE.3. FOR -SD/-DS OPTIONS, PLEASE REFER TO THE "XQXX WITH SCREW-DOWN OPTIONS" APPLICATION DRAWING.

FIG 1FOOTPRINT FOR QTH-060-01-X-D-XXX SHOWN

SHEET OF

RECOMMENDED PCB LAYOUT FOR QTH-XXX-XX-X-D-XXX

PROPRIETARY NOTETHIS DOCUMENT CONTAINS INFORMATIONCONFIDENTIAL AND PROPRIETARY TOSAMTEC, INC. AND SHALL NOT BE REPRODUCEDOR TRANSFERRED TO OTHER DOCUMENTS ORDISCLOSED TO OTHERS OR USED FOR ANYPURPOSE OTHER THAN THAT WHICH IT WASOBTAINED WITHOUT THE EXPRESSED WRITTENCONSENT OF SAMTEC, INC.

21

REVISION J

F:\DWG\MISC\Mktg\Footprnt\qth-xxx-xx-x-d-xxx-footprint.slddrw

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail [email protected] code 55322
"C"(FOR -RT1 OPTION)(SEE TABLE 1, SHT 1)

.120 3.05(FOR -RT1 OPTION)

.080 2.03(FOR -L OPTION)

"D"(FOR -L OPTION)

(SEE TABLE 1, SHT 1)

.0120 (TYP)0.305

.185 (TYP)4.70(2 PLCS PER BANK)

.025 (TYP)0.64

.057 (TYP)1.45

.100 (TYP)2.54(2 PLCS PER BANK)

.279 7.08(FOR -RT1 OPTION)

.1215 3.086

.5710 (TYP)14.503

.7875 20.003

.047 (TYP)1.19

.250 (TYP)6.35

.2075 5.2705(TYP)

.665 (TYP)16.89

.7875 (TYP)20.003

.0197 (TYP)0.500

.243 (TYP)6.17.102 2.58

(FOR -L OPTION) CL

CL

NOTES:1. STENCIL TO BE .0060[.152] THICK.

FIG 2STENCIL FOR QTH-060-01-X-D-XXX SHOWN

SHEET OF

RECOMMENDED STENCIL LAYOUT FOR QTH-XXX-XX-X-D-XXX

PROPRIETARY NOTETHIS DOCUMENT CONTAINS INFORMATIONCONFIDENTIAL AND PROPRIETARY TOSAMTEC, INC. AND SHALL NOT BE REPRODUCEDOR TRANSFERRED TO OTHER DOCUMENTS ORDISCLOSED TO OTHERS OR USED FOR ANYPURPOSE OTHER THAN THAT WHICH IT WASOBTAINED WITHOUT THE EXPRESSED WRITTENCONSENT OF SAMTEC, INC.

22

REVISION J

F:\DWG\MISC\Mktg\Footprnt\qth-xxx-xx-x-d-xxx-footprint.slddrw

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail [email protected] code 55322

Sheet1Drawing View1

Sheet2Drawing View3

$REVISION Z EQCD-XXX-XX.XX-XXX-XXX-X-Xsuddendocs.samtec.com/prints/eqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.pdf · f:\dwg\misc\mktg\eqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw notes: 1. represents$