Fanatec® is a registered trademark of Endor AG Designed and developed by Endor AG in Germany

TUNING OPTIONS

To enter Tuning Menu, press Tuning button. To navigate inside the menu, use the right FunkySwitch. Press it up or down to access 5 setups. Press the FunkySwitch right or left to go through the options and turn the FunkySwitch to change option values.

QuickGuide

www.fanatec.com

Tuning Button

FunkySwitch

Tuning Button

CENTER CALIBRATION

If a center calibration is needed (e. g. after �rmware updateof ClubSport Wheel Base) when using the steering wheelyou need to enter the tuning button as shown on the graphic.When tuning menu is active then press the analogue Stickand the FunkySwitch at the same time to calibrate the wheelcenter.

SHIFTER CALIBRATION

To enter shifter calibration mode, simultaneously press theTuning Menu Button and the button highlighted below.

PS3 MODE

PC / PS4 MODE

PS 22

* Game Speci�c Button

9 Touch Pad Button

Joy Joy+ 26 + GSB 2*

8 L2

6 L1

12 L3

7 R2

Options 10

R1 5D-Pad + 25

4

211 R3

1

3

ATTACHING THE RIM ON TAKING THE RIM OFF

To enter PlayStation 3 Mode, simulatneously press and hold the two buttons, highlighted below, for one second.

PlayStation 4 needs no special mode. The wheel has to be/stay in PC mode. Tuning Button

- Remove storage pin. - Compress and hold the Quick Release mechanism.

- Slide it on the ClubSport Wheel Base axle.

- Insert the storage pin.

- Release the Quick Release mechanism. - Release the Quick Release mechanism.

- Compress and hold the Quick Release mechanism.

- Place the rim face down on table.

- Align ClubSport Wheel Base axle, to correct position.

- Slide it o� the ClubSport Wheel Base axle.

Select Start

L2

L1R1

L3

L4 D-Pad +

R2

R3