Q4 2015 Equipment Flyer

ALC41500Triple Door, Foot Pedal Cabinet with Dust Collector• Heavy duty blast gun • See page 26

EQUIPMENTOCTOBER - DECEMBER 2015

OMEHW93690C10 Ton Air Operated End Lift with High Lift 10 Ton Stands• Lifts 10 tons at 200 psi• See page 10

ATEATPK-PV10PX10,000 lb. Capacity Overhead 2-post Lift• See page 6

capacity10,000 lb

$1,437.00

$2,799.00

$4,239.00

IRTC2475N7.5IRTC2475N7.5FPIRT45465820IRT2475F14GIRTC2475F13GH

IRT ad

SMALLBuilt for a

Of ThelifetimeChallenges

Biggest

RECIPROCATING COMPRESSORS.

THROW AT THEM.YOUCAN

ChallengesTHROWATATA THEM.T THEM.TYOU

CAN

Ingersoll Rand has been perfecting small reciprocating compressors for morethan a century. Today, our Type 30 compressors are recognized worldwide for

their reliable, trustworthy performance. We’re proud to supply dependableair for all your most punishing projects.

Learn more at IngersollRandCompressor.com.© 2015 Ingersoll Rand.

4 POSTS LIFTS

ATEATPK-409HP9,000 lb. Capacity Commercial Grade 4-post Lift• Lifting height: 81 1/2” (6’ 9 1/2”)• Runway length: 190” (15’ 10”)• 2 yr warranty on material and workmanship• Shipping weight: 2,230 lb.A light commercial grade portable four post lift built for the small body shop, farm shop, restoration shop or the discerning Individual buyer who needs the extra height and width. The 409-HP incorporates tall columns and a long hydraulic cylinder that allow the runways to be raised 76 inches (under runway) in the highest lock position. This extra lifting height allows most SUVs and pickup trucks to be parked underneath the vehicle stored on top and the extra runway width between the columns easily accommodates one ton dual wheel trucks.

ATEXH-PRO90009,000 lb. Capacity 4-post Lift• Lifting height: 85” (7’ 1”)• Runway length: 199 1/2” (16’ 7 1/2”)• 1 yr warranty on material and workmanship• Shipping weight: 2,300 lb.Extra long runways and extra high lifting capacity. This lift is built to commercial grade standards and incorporates the portability features enjoyed by the serious hobbyist.

ATEXH-PRO80008,000 lb. capacity 4-post Lift• Lifting height: 72” (6’)• Runway length: 165 1/2” (13’ 9 1/2”)• 1 yr warranty on material and workmanship• Shipping weight: 1,750 lb.The most popular 4-post hobbyist lift. This lift is perfect for the customer with “too many” cars.

ATEXH-PRO8000EXT-L8,000 lb. Capacity Extra Tall and long 4-post Lift• Lifting height: 84 1/2” (7’ 1/2”)• Runway length: 185” (15’ 5”)• 1 yr warranty on material and workmanship• Shipping weight: 1,900 lb.20 inches longer and 3 inches wider than the Garage Pro 8000 EXT. It has an extended runway height to allow taller vehicles to be stored underneath raised vehicle.

PLASMA CUTTING / SHOP VENTILATION4 POST LIFTS

3

$3,299.00

$2,435.00

$2,765.00

$3,325.00

4 POST LIFTS

ATEATPK-000014KITPortable Caster Kit for Atlas® 408-SL and Atlas® 409-HPDesigned for those customers who want the ability to relocate or reposition the 408-SL or 409-HP 4-Post lift after it has been assembled. Can be installed or removed in just a matter of minutes and requires no tools. The polyurethane wheels prevent floor damage.

BENHDS-14X4 Post 14,000 Lb 229Inch• 14,000-lb. lifting capacity• CE Approved and Certified. Meets or exceeds the standards

prescribed by European Standard EN 1493• Single hydraulic cylinder mounted underneath runway• Internal anti-sway slider blocks in each column• Rugged 1-3/4” roller axles• Multi-position safety locks in each column• Independent backup slack-cable safety latches• Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)• ETL approved

ATEATPK-414Atlas® 414 - 14,000 lb. Capacity, Commercial Grade 4-Post Lift• Lifting height: 74” (6’ 2”)• Runway length: 207” (17’ 3”)• 5-year structural, 2-year hydraulic warranty• Shipping weight: 3,200 lb.Designed and built to commercial grade standards and will provide many years of service. Uses a high strength cable system (with a under runway, oversized hydraulic cylinder) powered by a 220 volt, single phase, 4-HP power unit to raise and lower the lift.

4 POST LIFTS

4

ATEATPK-408SL8,000 lb. Capacity Commercial Grade 4-post Lift• Lifting height: 69 3/4” (5’ 9 3/4”)• Runway length: 166 3/4” (13’ 10 3/4”)• 2 yr warranty on material and workmanship• Shipping weight: 1,965 lb.Great features of our Atlas® Garage Pro Series 4 post hobbyist lifts, but incorporates many features found only on our Atlas® commercial grade 4-post lifts. All columns incorporate two special bends which help to increase the column strength. These strategic bends also increase the surface area for the slide block to travel. Horizontal cables are hidden inside of the cross tubes. Professional grade wheel covers are used to eliminate almost all exposure of cables and double lock system.

ATEXH-PROJACK353,500 lb. Capacity Sliding Jack• 90 day warranty on material and workmanship• Shipping weight: 350 lb.Designed for use on hobbyist lifts with no welded slide on runways. Glide blocks under extension ears allow the jack to be positioned under correct lifting point of vehicle.

$159.00

$4,535.00

$5,280.00

$2,465.00

$699.00

4 POST LIFTS

ATEXH-9KOH 9,000 lb. Capacity Overhead 2-post Lift• Overall height: 142” (11’ 10”) or 138”” (11’ 6”)• Asymmetric arms• 1 yr warranty on material and workmanship• Shipping weight: 1,500 lb.The perfect choice for those customers who demand the most lifting capacity at the lowest possible price.

ATEXH-9KBP9,000 lb. Capacity Baseplate 2-post Lift• Overall height: 111 1/2” (9’ 3 1/2”)• Symmetric arms• 1 yr warranty on material and workmanship• Shipping weight: 1,400 lb.A base-plate two-post lift designed for low ceiling garages.

ATEATPK-BP80008,000 lb. Capacity Baseplate 2-post Lift• Overall height: 108” (9’)• Super-symmetric arms• 2 yr warranty on material and workmanship• Shipping weight: 1,300 lb.This base-plate two-post lift designed for low ceiling garages. This lift features a single-point lock release.

ATEATPK-9OHSC-SS9,000 lb. capacity overhead 2-post Lift• Overall height: 142” (11’ 10”)• Super-symmetric arms• 2 yr warranty on material and workmanship• Shipping weight: 1,450 lb.This above ground lift is the perfect choice for smaller commercial repair facilities or individual buyers who demand the highest quality at the absolute best price.

PLASMA CUTTING / SHOP VENTILATION2 POST LIFTS

5

$1,899.00

$2,135.00

$1,935.00

$1,859.00

6

• 2 year warranty on material and workmanship

2 POST LIFTS

ATEATPK-PV9PX9,000 lb. Capacity Overhead 2-post Lift• Overall height: 142 1/2”-150 1/2” (11’ 10 1/2” - 12’ 6 1/2”)• Asymmetric/symmetric arms• Shipping weight: 1,500 lb.This commercial grade two-post lift that incorporates the same arm and carriage design as our industry-leader PV-10P. The PV-9P has symmetric columns and specially designed arms that can be set in either the symmetric or assymetric configuration. The PV-9P has dual direct drive cylinders and a single-point lock release.

ATEATPK-BP90009,000 lb. Capacity Baseplate 2-post Lift• Overall height: 111 1/2” (9’ 3 1/2”)• Super-symmetric arms• Shipping weight: 1,450 lb.This base-plate style lift equipped with single-point lock release - a very unique feature for a base-plate style lift.

ATEATTD-APEX10KB10,000 lb. Capacity Extra Tall Overhead 2-post Lift• Overall height: 139 7/8” (11’ 7 7/8”) or 135 7/8” (11’ 3 7/8”)• Super-symmetric or asymmetric arms• Shipping weight: 1,750 lb.The Atlas® APEX 10 PLUS was engineered and built to offer a commercial grade above ground lift to those customers who have fallen in love with the Double-S column design and asymmetric columns.

ATEATPK-PV10PX 10,000 lb. Capacity Overhead 2-post Lift• Overall height: 142” (11’ 10”) or 146” (12’ 2”)• Asymmetric/symmetric arms• Shipping weight: 1,900 lb.This commercial grade two-post lift designed to lift a wide variety of vehicles. The PV-10P has a low pad height to accommodate passenger vehicles but is built to handle full size pickups. The PV-10P has dual direct drive cylinders and single-point lock release.

ATEATPK-OH10000X10,000 lb. Capacity Overhead 2-post Lift• Overall height: 151 1/2” (12’ 7 1/2”)• Symmetric arms• Shipping weight: 1,700 lb.This commercial grade two-post lift is the perfect choice for garages that demand the highest quality at the absolute best price. Wider and taller than most two-post lifts.

ATEATPK-BP10000X10,000 lb. Capacity Baseplate 2-post Lift• Overall height: 111 7/8” (9’ 3 7/8”)• Super-symmetric arms• Shipping weight: 1,640 lb.This commercial grade two-post base plate lift is built for customers who want to lift heavy vehicles in a low ceiling garage. Incorporates the popular single-point lock release. Columns have a middle welded support gusset that adds extra strength to the oversized columns.

$2,399.00$2,099.00 $2,595.00

$2,799.00 $2,799.00$2,665.00

7

PLASMA CUTTING / SHOP VENTILATION

• 2 yEAr warranty on material and workmanship

ATEATPK-PV12PX12,000 lb. Capacity Overhead 2-post Lift• 12,000 lb. capacity• Overall height: 148 1/2” (12’ 4 1/2”) or 163 1/2” (13’ 7 1/2”) or 175 1/2” (14’ 7 1/2”)• Symmetric armsworkmanship• Shipping weight: 2,100 lb.The Atlas® PV-12P is a commercial grade lift designed to accommodate long wheel base trucks. The low pad height on the PV-12P allows the operator to lift both cars and trucks. The extra distance between the columns accommodates wider vehicles or vehicles with wide rearview mirrors. The extra height is perfect for tall vans and box trucks. Lowest height setting requires purchase of additional, shorter, cables.

ATEATPK-PV15PX15,000 lb. Capacity Overhead 2-post Lift• 15,000 lb. capacity• Overall height: 150 3/8” (12’ 6 3/8”) or 162 3/8” (13’ 6 3/8”) or 177 3/8”” (14’ 9 3/8”)• Symmetric arms• Shipping weight: 2,600 lb.The Atlas® PV-15P is a commercial grade lift designed to accommodate long wheel base trucks. The larger arms and taller pad height on the PV-15P are designed for customers who primarily work on trucks and SUVs. The extra distance between the columns accommodates wider vehicles or vehicles with wide rearview mirrors. The extra height is perfect for tall vans and box trucks. Lowest height setting requires purchase of additional, shorter, cables.

ATEATPK-BP12000X12,000 lb. Capacity Baseplate 2-post Lift• 12,000 lb. capacity• Overall height: 111 1/4” (9’ 3 1/4”)• Symmetric arms• Shipping weight: 2,300 lb.The Atlas® BP-12000 is a commercial grade heavy duty 12,000 LB. capacity 2 post base plate above ground lift. This above ground lift has over sized columns, symmetric three stage arms, and single point lock release.

2 POST LIFTS

ATEATPK-10OHSCX10,000 lb. Capacity Overhead 2-post Lift• 10,000 lb. capacity• Overall height: 151 1/2” (12’ 7 1/2”)• Super-symmetric arms• Shipping weight: 1,665 lb.The Atlas® 10-OHSC is a true 10,000 lb. capacity two post lift that offers a great value to the customer. The Atlas® 10-OHSC was engineered and manufactured to lift vehicles ranging from Smart Cars® to a one ton diesel dually. Extra lifting height and super-symmetric arm configuration allows the operator to work on all sizes of vehicles.

ATEATPK-2020151 1/2” Truck Frame Adapter for 2-post Lifts• One pair (2) of truck frame adapters• Fits lifts with 1 1/2” peg holes• Shipping weight: 4 lb.This saddle adapter set (2) allows the frame to “sit inside the saddles” and provide a superior lifting surface. This frame adapter set works well for many pickups (especially FORD®) and SUVs.

ATEATPK-FTA1 3/8” Truck Frame Adapter for 2-post Lifts• Fits lifts with 1 3/8” peg holes

$4,335.00

$3,535.00

$2,495.00

$49.00

$49.00

$3,499.00


8

Mountain 2 Post 12K Automotive Lift• 12K lifting capacity - ALI Certified Lift• 3-Stage front arms lift Symmetrically• Single point mechanical lock release• Padded overhead shut off bar with rubber

door guards• Premium powder coat finish• Installation/owners manual available electronically upon request• Fork Lift required for delivery & unloading and must be provided by customer/shop. Delivery service will not provide Forklift.

Installed Units• Delivery Included in the Continental U.S. only

MTN5594B - Installed - Blue

UNINSTALLED Units • Delivery Included in the Continental U.S. only

MTN5594BU - Uninstalled - Blue

Installed Units• Delivery Included in the Continental U.S. only

MTN5590 - Blue

MTN5590R - Red

Mountain 2 Post 10K Automotive Lift*• 10K lifting capacity - ALI Certified Lift• 3-Stage front arms lift both Asymmetrically and Symmetrically within same service bay• Single point mechanical lock release• Padded overhead shut off bar with rubber door guards• Premium powder coat finish• Installation/owners manual available electronically upon request• Fork Lift required for delivery & unloading and must be provided

by customer/shop. Delivery service will not provide Forklift.

Uninstalled Units • Delivery Included in the Continental U.S. only

MTN5590U - Blue

MTN5590RU - Red

freight termsSEE BACK OF BOOK

2 POST LIFTS• One year warranty on parts and labor

$3,899.00$3,899.00

$3,299.00$3,299.00

$5,839.00

$4,999.00


9

MOTORCYCLE LIFTINGATEATTD-6MR6,000 lb. Capacity Mid-rise Scissor Lift• Lifting height: 53 1/2” (4’ 5 1/2”)• 7 locking positions• 2 yr warranty on material and workmanship• Shipping weight: 1,050 lb.A popular choice for wheel service and body shops. There is also room for some underbody work.

ATEHT-CYCLELIFT1,000 lb. Capacity Motorcycle Lift• Lifting height: 33” (2’ 9”)• Length: 93” (7’ 9”)• 1 yr warranty on material and workmanshipLift operates between 90-100 PSI. The Cycle Lift is the perfect addition to the service department of all professional motorcycle dealers or for the person who wants to work on his personal bike.

ATEHTBJMotorcycle Jack• 1,000 lb. capacity• Fits all motorcycle lifts• Adjustable height• Includes all adapter sets• Shipping weight: 50 lb.A lightweight scissor jack that fits under most motorcycle and ATV frames.


MOTORCYCLE LIFTING

$855.00

$105.00

$1,799.00


10

LIFTING

OTC412250 Ton Center-Hole Power Twin Ram, 3” Stroke• OTC’s center-hole rams are ideal for jobs that require a

gread deal of force and a relatively short stroke• Compared to the force it develops, each center-hole

Power Twin ram is lightweight, compact, and easy to handle, permitting its use in confined quarters

• Center-hole feature permits extending jacking screws, cables, puller screws, etc., straight through the ram

In capacities of 17-1/2, 30,50, and 100 tons and for operating pressures up to 10,000 PSI; use these rams on Grip-O-Matic pullers, Push-Pullers, and shop presses.

OTC414060-Ton Single Acting Ram• Ideal for push/pull applications found in

off-highway construction mining and other industries where heavy equipment is maintained

• Center hole permits extending screws, cables, etc., straight through the ram for versatility of application

OTC1520Mobile Vehicle Lift System• System can be rolled to the vehicle anywhere

in the shop or outside on a level surface• Unique design provides lift from the tires, not the frame or axle members• Ideal for situations where limited ground clearance or a lack of clear

access complicates lifting• Single controller operates both sides of the system for a smooth, level lift up to two full feet from the bottom of the tires to the ground• Units can double as support stands when retention pin is inserted• Covered by OTC Lifetime Marathon WarrantyCapacity: 10 TonsAir pressure: 150 psiLifting range: 0-24”Saddle width: 19-1/2” to 24-1/2” dia. rim sizesHeight: 53-1/4”Width: 41-1/2”Length: 39-1/2”

OTC159010 Ton Air Lift for Trucks and Trailers• Adjustable lifting saddles and an extra wide stance for extra stability• 10 ton lifting capacity at 200 PSI air supply• Lifting range is 13” to 52” with a 14” reach• An automatic mechanical safety catch

engages in five height positions, it must be manually released to lower the load

• Two large swivel casters and pneumatic tires make it easy to maneuver, even on loose gravel

OMEHW93690C10 Ton Air Operated End Lift with High Lift 10 Ton Stands• Lifts 10 tons at 200 psi• 2-12” pneumatic rear tires and 2-6” casters for easier transport

and positioning under load• Less maintenance with one large cylinder• Pin style column adjust in 2 inch height intervals on jack stands• Ideal for fleet, agricultural and construction maintenance

PREPAID FREIGHT

AIR LIFTS / END LIFT JACKS

ALUMINUM JACKS AND RAMS

$1,449.00

$2,029.00

$4,239.00

$10,899.00

$4,449.00


11

JACKS

LIFTING

ESC10771Yellow Jackit 50 Ton 3 Stage Air/Hydraulic Jack• 3 Stage Jack 50T/25T/10T• Power up / power down• Handle length: 57.5”• Easy to roll jack• Air over hydraulic for smooth heavy liftingExtremely low minimum height 5.5”. Designed for lifting low buses and other low clearance vehicles. Maximum stability.

ASTAJ22FE2A22 Ton Capacity Air Over Jack with Quick Springs• Large 8” (203mm) diameter hard rubber tires • Includes quick springs for fast ram retraction• Safety overload system prevents jack from being

used beyond its rated capacity• Meets ANSI standard for performance and safety

OTC51066-ton Capacity Air/Hydraulic Service Jack• Huge steel front wheels are mounted in bearings for trouble-free service life• Spring-loaded handle can be locked

in three positions

OTC511010-Ton Air/Hydraulic Service Jack• Can also be operated manually when shop air is not available• Huge front wheels mounted in bearings provide trouble-free service life• Rugged steel frame members• Rear swivel casters make spotting the jack easy• Spring-loaded handle may be locked into three positions, from vertical to

horizontal

OTC1511BStinger 10-Ton Air/Hydraulic Service Jack• Bring the versatility of air assist

operation to your shop’s lifting tasks• Can also be operated manually, when

shop air is not available• Huge front wheels mounted in bearings

provide trouble free service life • Rugged steel frame members

Spring loaded handle may be locked in three positions, from horizontal to vertical. Air pressure: 80-120 PSI; lifting range: 6-3/8” to 22”; saddle diameter: 7-3/8”; overall reach: 90”; frame height: 12-3/4”; handle length: 42”.

AIR / HYDRAULICS JACKS

Air Hydraulic Truck Jacks• Narrow width fits between tandem wheels• Load-limiting and bypass valves prevent use beyond

rated capacity and overextension of ram• Spring activated self retracting ram• Complies with ASME PALD/2009 safety standards• 2 Year Warranty on material and workmanship

KTI63194 - 22 Ton • 22 ton capacity truck jack with a lift range from 8.9” to 17.5”

KTI63198 - 50 Ton • 50 ton capacity truck jack with lift range from 11.4” to 21.25”

$642.65

$1,481.25

$3,094.00

$4,065.00

$1,625.00

$466.95

$799.50


12

LIFTING

OMEHW9366010 Ton Manual Service Jack• Lifting trucks, trailers, and buses

by the axle, differential, or frame• Dual piston action provides speed to

contact and power to lift• Long chassis for hard to reach points• Handle adjusts to three pumping positions• T handle with release knob for exact positioning

of a loadSealed hydraulic unit keeps out grit, grime and moisture. Large full swivel saddle and ball bearing caster make positioning easy. Cast lift arm for heavy loads. Made in the U.S.A. Comes with 2 year warranty.

OMEHW9366210 Ton Air/Manual Service JackOperates manually or with air. Patented “Speed Pak™” reduces handle pumping. Uses standard shop air 110-175 psi pressure (140-175 psi for rated load). Made in the U.S.A.

Service Jacks• 45.75” long pump handle with release knob works independently of handle position• Raise the saddle quickly to the load with additional foot pedal• Load-limiting and bypass valves prevent jack from being used beyond rated capacity

and over-extension of ram• Complies with ASME PALD/2009 safety standards• 2 Year Warranty on material and workmanship

KTI63155 - 5 Ton • 5 ton capacity service jack with a lift range from 5.75” to 22”

KTI63186 - 10 Ton • 10 ton capacity service jack with a lift range from 6.25” to 22.5”

OTC521010-Ton Heavy-Duty Service Jack• Ergonomic handle for user comfort and easy mobility• Foot pedal for quick approach of the lifting saddle to load• Built-in tray for fasteners and tools.• CE marked – ASME/PALD tested

OTC151220 Ton Stinger Floor Service Jack • The 20-ton capacity with a lifting range of 7-1/2” to 24”• Low-profile stance and the extended height add to versatility• Wheels and swivel casters feature internal bearings• The foot pedal or jack handle can be used for pumping action• Counter-balanced, spring assisted handle has a three-position lock• Saddle diameter: 7-1/2”; overall reach: 97”; frame height:

10-1/4”; handle length: 42”; floor space: 18-1/8” to 61-3/8”.

OME2220120 Ton Long Chassis Service Jack with Air• High speed Air TurboMotor is

equipped to raise the load to the desired height efficiently, effortlessly, and safely

• Wide stance and low center of gravity provide optimum stability under load stress

• Heavy gauge, steel frame helps prevent distortion or twisting• Handle actuated release valve provides precise metered control

of lowering speeds• Convenient foot pedal designed for fast, no load lifts

OMEHW93660C10 Ton Hydraulic Service Jack and Jack Stands• Lifting trucks, trailers, and buses by the

axle, differential, or frame• Dual piston action provides speed to

contact and power to lift• Long chassis for hard to reach points• Pin style column jack stands adjust in 2 inch

height intervals• Heavy duty square tubing on jack stands

SERVICE JACKS

AIR / HYDRAULICS

$2,899.00

$3,535.00

$1,510.00

$2,603.00

$2,599.00$3,139.00

$857.05

$1,178.55


13

LIFTING

OME2322122 Ton Air Actuated Hydraulic “Axle” Jack with Extension Screw• Material: Steel • Min. height: 9-7/8”• Max. height: 22-1/2” (with 2-1/2” adapter) • Net weight: 100 lbs

OMEHW93735A25 Ton Axle Jack with 3” Adapter• 8” Low height allows lifting from axle or suspension• Compact, powerful design quickly lifts rated capacity• Specially coated ram prevents rust and extends jack life• Air assisted ram retract• 3” adapter for added height

OMEHW93735AC25 Ton Axle Jack with 25 Ton Jack Stands• Jack has 8” low height allows lifting from

axle or suspension• Compact, powerful design of jack quickly

lifts rated capacity• Pin style jack stand column

adjusts in 1½” height intervals• Heavy duty square tubing• Jack stands sold in pairs

PREPAID FREIGHT

PREPAID FREIGHT

OTC5093BLong Reach Under Axle Jack• Three-stage lift capacity – 22, 38.5 and 71.5 ton• Air-driven cylinder with pressure control knob for

maximum user safety• 4-position handle: horizontal, 45 degrees,

vertical, or collapsed• 7-inch minimum height for low clearance vehicles• Complies with ASME / PALD test requirements

OTC529227.5 Ton Under Axle Jack• Robust design with completely sealed piston• New lever design and pneumatic release valve allows

for more precise release control, does not require separate valve operation step

• Four position handle includes ‘stow away’ position• Spring return piston• Includes two height adapters, ANSI/PALD certified

INT5444 Ton Air/Hydraulic Axle Jack• Lifts from 9-1/4” To 16-1/4”• Heat treated cylinder wall prevents scoring• Large rubber tires for easy movement• 1 piece handle• Powder coat paint• Outstanding durability and quality• Operates at 90 - 180 PSI

AXLE JACKS

BHKBP22525 Ton Truck Axle Jack• The best warranty in the Industry (5 years

with electronic registration)• Incorporates German U-Cup Seals and

Military Spec Hi/Lo Temp Hydraulic Fluids for long life and dependability

• Includes 1”, 2.5”, 6’, and 7’ adapters for lowest pick height and highest lift available

• Extensive life cycle testing• 100 % made in Taiwan

JACKS

$2,045.00

$4,039.00

$2,079.00

$2,155.00

$711.65

$2,239.00

$3,395.00


14

LIFTING

OTC528150Adapter• Eaton® ‘Lightning” adapter. Used with the No. 5019A transmission jack

OTC543284RoadRanger Transmission Adapter• RoadRanger® transmission adapter for Model series FRO-11210C to FRO-18210C

that is equipped with an integrated cooler• Used with the No. 5019A transmission jack.

OTC553516Differential Mounting Adapter• Differential mounting adapter mounts easily using existing bolt patterns• Fits the most common differentials currently in use on Category 7 and 8 Heavy Duty

Trucks, including: Eaton, Fuller, Rockwell, Meritor, Spicer, International, and Mack• For use on OTC 5019A / 5078 and Stinger 1522A Transmission Jacks

OTC5019A2,200 lb. Capacity Low-Lift Transmission Jack• The 8-1/4” low height is perfect for aerodynamic trucks

with low ground clearance• Special mounting adapter (No. 540231) fits popular Eaton®

Fuller® RoadRanger® transmissions used on nearly all Class 7 and 8 heavy-duty trucks. Mounting plate angle is adjusted with the turn of a wrench

• Degree of tilt: 20° back, 15° forward, 12° side to side• Swiveling pump handle permits ease of operation in

restricted working spaces. Fast-acting pump quickly raises lifting arm.

KTI635171.5 Ton Truck Transmission Jack• 1.5 ton capacity truck transmission jack with lift range from 8.62” to 36.625”• Front and back swivel casters allow

for trouble-free positioning and maneuverability

• Pump handle rotates 360 degrees for multiple work positions• Universal saddle with tilt features• Complies with ASME PALD/2009

safety standards• 2 Year Warranty on material and workmanship

KTI635051000 Lb. 2-Stage Telescopic Transmission Jack• Capacity: 1,000 Lbs• Lifting Range: 35” to 74.2”• Speedy pump foot pedal raises telescopic rams

to load quickly• Complies with ASME PALD/2009

safety standards• 2 Year Warranty on material and workmanship

INT3180-SP12- Ton Heavy Duty Transmission Jack Promo• Includes INT3181 transmission adapter set FREE• Maximum tilt on saddle for easier alignment• Rugged 4” castersJack is a heavy 375 pounds to safely remove and lift heavy transmissions without the fear of tipping over. 2” handle pivots a full 360 degrees around pump. Fully adjustable saddle with maximum tilt for easier alignment. Adjustable corner brackets.

OTC1522A2,000 lb. Capacity Low-Lift Transmission Jack• Rugged, stable unit is ideal

for handling heavy transmissions• Includes adapter plate for Eaton®

Fuller® Road Ranger® transmissions• Low profile design gets under the lowest clearance

trucks, making it ideal for clutch repair work• Pump handle rotates 360° for operator convenience• Safety overload prevents use beyond its rated capacity• Height range 6-7/8” to 35-1/4”

OTC5078Air Assisted 2,000 lb. Capacity High Lift Transmission Jack for Trucks and Buses• For shops with in-ground or above-the-floor vehicle hoists• Low height of 41-1/2” allows transmission to be rolled out from

under bus or other vehicle’s frame, a clearance problem with competitor’s jacks

• Metered, foot-operated air pump allows effortless lifting of the transmission into place, controlling the load precisely during removal and installation

• Operation is twice as fast as competitive jacks powered by a hand pump, and it costs less

• A dedicated adapter that fits the popular Allison 500 and 600 series automatic transmissions in included

• Safety bypass prevents damage caused by a system overload. • Covered by OTC Lifetime Marathon Warranty®.

TRANSMISSION JACKS

$1,672.00

$2,385.00

$440.39

$274.65

$470.79

$714.27

$1,499.95

$1,197.00

$2,825.00


15

LIFTING

OTC1812Load Leveler• Improved design over conventional

spreader bars• Carriage on main support beam

moved by turning lead screw; this permits fine adjustment

of the tilt angle of component being lifted

• Maximum lifting capacity: 6,000 lbs.Distance between hooks minimum: 30”; maximum: 46”; chain grade: 80. Made in the U.S.A. and covered by the Lifetime Marathon Warranty.

ESC90538Agricultural Wheel Dolly• Easy mounting, demounting and handling of large

wheels on agricultural and earth moving machinery• Double acting hydraulic system• Hands free switch between lifting and lowering action

- safe and controlled lowering• Capable of handling large wheels from 45.3” up to 84.7”

in diameter and up to 41.3” in depthTop point wheel connection rod keeps the wheel in safe balance. Capacity: 3,306 lbs. Large 6” wheels for easy maneuverability.

OTC52144-Ton Capacity Fork Lift Jack• 8,000 lb capacity (4 tons) with

a low starting height of 2-5/32”• 10,000 lb capacity (5 tons) when lifting

from cylinder saddle–ideal for agriculture and industrial applications

• Unique shape of primary saddle allows for handling of all lift truck configurations with flat or edged surfaces.


OTC18136,000 Lb. Capacity Heavy-Duty Mobile Floor Crane• Telescoping boom adjusts to three different lengths

for three different weight capacities• Boom swivels for vertical and lateral positioning• Equipped with two speed hydraulic pump for rapid,

easy lifting• Legs extend to straddle the biggest tires• Usable reach is almost 92”

OTC18146,000 Lb. Heavy-Duty Mobile Floor Crane with Electric/Hydraulic Pump• Telescoping boom adjusts to three different

lengths for three different weight capacities• Boom swivels for vertical and lateral positioning• Equipped with electric/hydraulic pump (115V)

with remote motor control• Legs extend to straddle the biggest tires• Usable reach is almost 92”

Floor Cranes• To conserve valuable floor space, crane folds

into a compact package for storage• For “close-in” work, leg spread adjusts to clear

vehicle’s wheels, telescoping boom extension gives additional reach• Roller bearing mounted wheels and steering dolly

provide ease of mobility• A two-speed hydraulic hand pump provides fast boom travel;

descent of boom is under precise control of operator

OTC18192200 lb. Capacity Heavy Duty Floor Crane • Includes 16-7/8” lifting chain

OTC18204400 lb. Capacity Heavy Duty Floor Crane • Includes 18-3/8” lifting chain


FLOOR CRANES

STANDS / LIFTS / WHEEL DOLLIES

CRANES / DOLLIES

$11,249.00

$11,954.00$4,255.00

$5,399.00

$1,599.00

$3,109.00

$1,408.00


16

LIFTING

BRA7600Branick 7600 Strut Spring Compressor• Doesn’t require adaptors• Heavy duty Acme thread• Multi-position hooks• Versatile mounting options• Easy to use

OTC5090Back Buddy™ II• Fast-motion ratcheting jack with 14” of vertical lift• Tilting mechanism to achieve the exact angle

necessary for precise reassembly• Fold down handle for open access to the work area

OTC5017ABrake Drum Dolly• Remove, install, and transport truck brake drums

without physically having to lift them• Works on 15” and 16-1/2” drums found on most Class

7 and 8 tractor and trailer brake systems• Heavy-gauge steel construction, ten-inch pneumatic

tires, and adjustable handle• Makes it a 1 person job• Covered by OTC Lifetime Marathon Warranty®

OTC1735BHeavy-Duty Motor-Rotor® Repair Stand, 2000 Lb. Capacity• Handles a wide variety of engines, transmissions, torque converters, and

rear axles from trucks, tractors, and construction machinery• The 50:1 ratio gearbox allows full rotation of mounted unit with just a

turn of the crank and locks in position. Easily maneuvered when loaded• To ensure engine stability in all positions, this repair stand is equipped

with a positive-crank handle locking mechanism• Twin-post design, featuring laterally adjustable, 3-position outboard

support; provides an extremely stable work-holding unit• 2,000 lb. Capacity Heavy-Duty Motor-Rotor® Repair Stand• Covered by OTC Lifetime Marathon Warranty®

OTC1585APower Train Lift with Tilting Plate• Compact design and swivel casters

for easy maneuverability• Includes the tilting plate• Height range is 29-1/2” to 68-1/2”• Table size: 20-1/2” x 30-1/2”• Supports up to 1,250 lbs.

OTC15952,500 lb. Capacity Power Train Lift • Powered by a quiet, 110 volt electric/hydraulic pump• Smooth, sturdy lifting and lowering motion

controlled by hand-held remote• Two patent pending independent adjusting

screws tilt the table + or - 15 degrees side to side, or fore and aft,and ensure maximum stability of the table in any position

• Large casters accommodate heavy loads• A 30 ft. long retractable extension cord reel

is mounted to frame

OTC4241Kingpin and Brake Anchor Pin Pusher without Hydraulics

OTC4240Kingpin and Brake Anchor Pin Pusher Set with Hydraulics• Five special collars and two pins allow this unit to work

on both straight and tapered kingpins and accommodates sizes from 7/8” to 2” in diameter and up to 11-1/4” long

• Tool delivers 30 tons of hydraulic force to push out even the most corroded kingpins

• The anchor pin can be removed quickly by using the special adapter installed in the pusher’s base block and the unit positioned over the brake’s spider

• Works on many models of trucks and buses• 27-1/2” high X 8-1/2” wide; 30 ton capacitySet includes No. 4002 hydraulic hand pump, No. 9767 hose, No. 9798 hose-half coupler, No. 4121 Power Twin 30-ton ram, and No. 29424 anchor pin adapter.

OTC5018ATruck Clutch and Flywheel Handler• Handles 14” and 15-1/2” clutch assemblies weighing up to 250 lbs• 360º swivel head• Open stance with swivel casters• Eliminates any lifting of the clutch• Enables technician to pivot clutch to any position for removal and installation


$972.99

$1,798.00

$939.79

$1,135.00

$1,659.00

$2,856.00

$5,315.00

$2,390.00

$610.89


17

STANDS / WHEEL DOLLIES

LIFTING

OMEHW937663/4 Ton Wheel Dolly• For handling of dual wheels

and large single wheels• Handles up to 52” diameter

tires and wheels• 2 swivel ball bearing casters

for easy positioning• Wide frame and lifting carriage• Carriage arm rollers with

self-lubricating bearings

OTC1750A6,000 lb Capacity Revolver® Diesel Engine Stand with Adapter Assembly• 96:1 ratio worm and gear set rotates components

a full 360 degrees• Crank handle can be locked in any position• Integral 12 ton jack raises the work to provide the swing

radius needed clearance• Includes universal engine adapter assembly• Two front wheels and two rear casters provide mobility

OTC1770A1500 lb. Capacity Truck Dual Wheel Dolly• Remove, transport, and replace dual wheel and tire assemblies without strain or struggle• 1,500 lb. capacity and 3-1/2” swivel casters provide easy maneuverability• Hydraulic jack provides 0 to 5” of lift and tilts

wheel assembly 4 degrees to prevent damage to wheel seal

• Floor space is 45” by 41”• Includes a 6’ support chain to hold load in place

OTC1591B10 Ton Capacity Combination Air Lift and Support Stand• Commonly used in pairs, these

air-operated units are perfect for heavy-duty lifting jobs

• Remote actuating valve and an 8 ft. air hose give you control from a distance

• Can be used as a support stand, as well as a lift, thanks to an innovative internal design• Wide range of height adjustment and durable, free-

rollingwheels make the jack easy to maneuver and position where it’s needed

• Capacity of 10 tons at 200 PSI air

The minimum height (unpinned, no extension) is 19-1/2” and maximum height (pinned in top hole, with extension) is 49-1/4” with a 10-7/8” stroke.

OTC61405Engine Stand Cumins Adapter Plate• For 1750A and 1750 diesel engine stands• For Cummins L-10 and M11 series engines. Plate attaches to

the left side of ngine for complete teardown• Mounting plate includes all the necessary hardware and an

engine application chart. NOTE: No. 205061 Universal Adapter Plate Assembly is required for use with all plates

OTC6592StrutTamer™ Extreme with Stand• Extreme duty design to handle the

heavier springs found on mid- and some full-size truck strut assemblies

• New frame includes cross bracing at arm mount locations - standard, this eliminates frame flex when compressing heavier springs

• 2:1 reduction gearbox - standard, allows for a 2:1 torque compression increase when compressing struts

OTC526920-ton Wide Truck Ramps• Application: Wider Front Wheels

(cement, dump, garbage trucks)• Long, 33” retractable T-handle

enhances mobility.• Non-skid rubber matting prevents

slippage during use.• Durable, heavy-duty rubber wheels.• Capacity per pair: 20 tons; overall length:

51”; tread width: 16”• Covered by OTC Lifetime Marathon Warranty®.

PREPAID FREIGHT



$6,275.00

$1,481.00

$2,404.51

$1,143.00

$939.85

$1,259.00

$998.00


18

LIFTINGLIFTING

1 Ton Electric Chain Hoist• Single-phase, 115/230 voltage (AC),

16.0 amps at low voltage• 1 ton rated load, 16 ft./min. lifting speed• Built-in, multiple-disc, magnetic brake provides

positive load holding and spotting• Adjustable upper and lower limit switches

for maximum flexibility in regulating load travel

MLW9567 15 Foot Lift Height

MLW4204-1Electromagnetic Drill Press• Powerful 7.2-amp motor: Engineered for the

toughest applications, delivering 600 RPM• Dual-Mount Gearwrench Case/Reverse Mount:

Permits tight quarter drilling• ½” Capacity: Taps up to 5/8-inch/18 threaded

holes (5/8-11 and ½-13 taps are not recommended.)• Maximum force: Develops up to 1650 pounds of drill

point pressure with a 1-inch steel plate• Solid state electronic switching: Offers faster,

smoother and quieter switching for a longer product lifespan

CMF1001272200 lb. Champion Winch Kit• 2,200 pounds rate line pull,

roller fairlead included• Series Wound motor (1.0 HP, 12V DC)

with free spooling clutch• Galvanized super-duty aircraft cable (49’ x

5/32”)Planetary gear system (153:1 gear ratio)Accessories: Power in/out controller, mounting channel, roller fairlead, and D-shackle

• Winch dimensions: Length 11”, width 4”, height 4.3” and weight 20 lbs.

• Includes 2 year warranty

CMF1001294700 lb. Champion Winch Kit• 4,700 pounds rate line pull, roller fairlead included• Series Wound motor (1.6 HP, 12V DC) with cam

action free spooling clutch• Galvanized super-duty aircraft cable (52’ x 15/64”)• Planetary gear system (166:1 gear ratio)• Accessories:Roller fairlead, power in/out remote

control, mounting channel, and 1.25” hitch adapter• Winch dimensions: length 16.3”, width 4.4”, height

4.4”, and weight 35 lbs.• It includes 2 year warranty

CMF130053,000 lb Champion Power Winch Kit• 3,000 pounds rate line pull,

roller fairlead included• Permanent magnet motor (1.3 HP, 12V

DC) with cam action spooling clutch• Galvanized super-duty aircraft cable

(45.9 feet x 3/16 inch)• Planetary gear train (153:1 gear ratio)• Accessories: Power in/out controller,

mounting channel, roller fairlead

JET187741JLP-025A-10 Lever Hoist, 1/4 Ton 10’ Lift • Weston Style Dual Pawl Brake System – Dual Pawl design

increases safety by splitting the opposite sides of the ratchet gear for greater load security

• Alloy Steel Hooks – Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety

• Heat Treated Load Plates- Heat treated for durability, these extend the life of the hoist in industrial environments

JET1877401/4 Ton Mini-Puller with 5’ Lift • Geared Drive Train- JET’s exclusive five gear drive

train requires less force to lift or secure a load• Weston Style Dual Pawl Brake System – Dual Pawl

design increases safety by splitting the opposite sides of the ratchet gear for greater load security

JET1875051/2 Ton Lever Hoist with 5’ Lift • Weston Style Dual Pawl Brake System – Dual Pawl

design increases safety by splitting the opposite sides of the ratchet gear for greater load security

JET1875061/2 Ton Mini Puller with 10’ Lift • Weston Style Dual Pawl Brake System

– Dual Pawl design increases safety by splitting the opposite sides of the ratchet gear for greater load security

JET101910JET S90 Series Hand Chain Hoist, 1 Ton 10’ Lift • Weston Style Dual Pawl Brake System

– Dual Pawl design increases safety by splitting the opposite sides of the ratchet gear for greater load security

• Alloy Steel Hooks – Industrial rated hooks rotate 360 degrees for easy rigging, hooks slowly stretch to indicate an overload situation increasing jobsite safety

• Needle Bearing Design – promotes long hoist life with low wear reducing downtime

HOISTS AND WINCHES

$127.14

$252.86

$155.71

$135.19

$178.85

$217.55 $217.75

$180.29

$2,031.00

$1,489.00


19

speeds FOR ULTIMATE CONTROL

2 available

TIRE CHANGERSTIRE CHANGERS

BRALR-EFTire Spreader with Lift• The Model LR-EF is typically used for both passenger and truck tires• This spreader is air-powered and has an easy to use tire lift• It’s affordable and a simple solution for truck tires• The high-impact industrial light is mounted on a flexible arm making it

easier for inspection and repair• It uses a CFL bulb that is RMA compliant, meaning our bulbs emit a minimum

of 200 foot candles, which the RMA requires for proper tire repairs• Made in the U.S.A. at Branick’s manufacturing facility in Fargo, ND!

BOSTCE4435THPTilt Back Tire Changer• The TCE 4435THP delivers 2 variable speeds for ultimate control• TCE 4435 THP is the result of a comprehensive technical

study producing the most stable and long lasting design in the equipment history

• Its bead breaker is 40% faster than previous versions• Pedal controlled 2 speed turntable (7 rpm and 15 rpm)

allows for exact torque as needed• MASSIVE 5-1/2” x 5-1/2” tilt tower maximizes robustness and

rigidity of the most stressed component of a tire changer

BOS1694100216810Premium Heavy Duty Hydraulic Tire Changer• Premium Heavy Duty Hydraulic Tire Changer (220V 3 Phase) Truck,

bus and agricultural high volume tire service• Rim diameter 14”-26”, maximum width 31.4”,

maximum diameter 64.5”Remote control operation• 220 volt 3-phase

BOSF00E900832810Easy Combo Wheel Balancer and Tire Changer Package• Low investment cost for low tire volume shop• Model WBE4100 manual entry wheel balancer, made in Italy,

with standard 3-cone set and quick nut• Model WBE4100 features multiple balancing programs and weight placement options• Model TC220S swing arm tire changer designed for simple and intuitive operation• Includes set-up and training by Bosch factory representative

Ask your salesman for leasing options

PREPAID FREIGHT

$2,412.97

$3,949.00

$8,795.00

$14,829.00


20

TIRE CHANGERS

ATEATTC221Swing-arm Tire Changer• Clamping range: 9 3/4”-23 1/4”• No beadblaster included• 110 Volt motor• 1 yr warranty on material and workmanship• Shipping weight: 500 lb.The Atlas® TC221 wheel clamp tire changer is the perfect changer for a small commercial garage or an ATV / Motorcycle dealer.

ATEATTC755Tilt-back Tire Changer• Clamping range: 11 7/8”-28”• Beadblaster included• 110 Volt motor• 1 yr warranty on material and workmanship• Shipping weight: 650lb.The Atlas® TC755 is our “professional tire dealer” or “large car dealership” tilt back wheel clamp tire changer. Perfect for aftermarket chrome wheels.

AMMHIT5000H.D. Tire Changer• Easy-to-use swing-arm houses all hydraulic controls

with a dedicated lever for each powered function• Self-centering hydraulic clamping chuck• Adjustable pressure regulator ensures proper matching

of chuck pressure to rim strength• Heavy, tapered roller bearings and a dual-direction hydraulic

motor provide smooth torque• Roller-type tire spreader standard• Max Tire Diameter: 76” (1930mm)• Max Tire Width: 25”+ (635mm+)• Min / Max Rim Diameter: 15”-38”• Electric Specifications: 220v / 1ph or 220v / 3ph, 60Hz• Air Required: No• Max Chuck Torque: 2900 ft-lbs• Max Overall Dimensions: 96” W x 108” D x 66” H

Rim Clamp Tire Changers• Clamps wheels externally up to 21”• Powerful 1.5 horsepower motor• Bead loosener - three support blocks and

sculpted blade provide wheel protection and ensures contact with tire beads at the proper angle

• Coats X-Shaped Tabletop holds wheels firmly in place during operation

AMM5040Awith Air Drive MotorAMMRC45Ewith Electric Drive Motor

Rim Clamp Tire Changers• X shaped high torque electric turntable with

external clamping range capacity of 9in. - 30, gives you the power you need for tough applications

• Coats exclusive new three position bead loosener for eliminating wheel damage and increasing productivity

AMMAPX90EAPX90E Rim Clamp Tire Changer with Electric Drive

AMMAPX90AAPX90A Rim Clamp Tire Changer with Air Drive

PREPAID FREIGHT

PREPAID FREIGHT

TIRE CHANGERS TIRE CHANGERS

$1,265.00 $2,265.00

$15,510.00

$16,729.00

$16,729.00

$5,229.00

$5,229.00


21

TIRE CHANGERSTIRE CHANGERS

ATEATTC-RHA-SARight-hand assist arm for swing-arm tire changers• Fits Atlas® 200 series

swing-arm tire changers• Shipping weight: 169 lb.The Atlas® RH assist arm is the perfect companion to the Atlas® LH assist arm when working on extremely stiff sidewall and run flat tires. As the old saying goes “two hands (heads?) are better than one”.

AMMCHD-9551Coats® Heavy-Duty Tire Changer• Offers the most automated features and widest range

of fittings in the CHD line• Remote-controlled rotating tool head/arm for the fastest,

easiest tool changes in the business• Optional wireless remote gives you freedom to move

around the machine without cumbersome cables• Handles rims from 14” to 46” (up to 56” with clamp

extensions) and tires up to 95” in diameter and 51” wide.• Wheel Handled: Budd & Dayton, Tube &

Tubeless Mount / Demount: Hook & Roller on Reversible Mount

• Max Overall Dimension: 112”(w)x81”(d)x75”(h)• Max Wheel Weight (lbs.): 3960

TIRE CHANGERS


ATEATTC229Swing-arm Tire Changer• Clamping range: 9 3/4”-23 1/4”• Beadblaster included• 110 Volt motor• 1 yr warranty on material and workmanship• Shipping weight: 550 lb.The Atlas® TC229 is identical to the TC221 tire changer, but has the added bead blaster system to help inflate stiff sidewall tires and other “hard to inflate” tires.

ATEATTC289Swing-arm Tire Changer• Clamping range: 11 7/8”-28”• Beadblaster included• 110 Volt motor• 1 yr warranty on material and workmanship• Shipping weight: 650lb.The Atlas® TC289, with its extra large turntable and extended clamping range is designed and built for professional high volume tire repair shops.

TIRE CHANGERS

BENR980NXTNextGen™ Swing Arm 25” Capacity Tire Changer• A new high-torque electric turntable drive features increased speed and reversible

direction for quicker tire removal and installation. Controlled speed gives low profile and run-flat beads time to relax to reduce the risk of tire damage

• Improved electric motor features the best of proven technologies, including rugged copper rotor construction, stronger high-quality ball bearings, thermal-cool epoxy insulation, and durable rolled steel frames. All motors are 110-208/240V and 50-60 hertz capable

$30,959.00

$535.00

$1,599.00

$1,935.00

$3,735.00


22

BOS1694100245810WBE 4230 Balancer With Color LED Display 230V/1PH/50-60HZ• WBE 4230 is ideal for medium to high volume shopsSix second cycle

time, fastest floor to floor balancer in the range• Data arms automatically measure diameter, distance and width Inner

wheel light ring and laser to direct operator for exact weight positioning• 12” to 30” wheel, 21” wide, 47.25” maximum diameter

WHEEL BALANCER

AMM1150-2DA1100 Series Wheel Balancer• Automatic measurement 2 of 3 parameters• Easy behind the spoke weight placement helps maintain

a “clean” look on custom wheels• Direct TAW placement• Easy to use control panel

AMM775Model 775 Discover Coats® Light Duty Wheel Balancer• Integrated LED Matrix Display: easy-

to-read visual cues and keypad promote proper balancing techniques and faster bay turnaround times

• 10 Balancing Modes: multiple static, dynamic, and alloy modes

• Self-Calibrating: provides balancing accuracy within 1/100 of an ounce

• Space Saving Design: put your balancing station virtually anywhere

• 40 mm Shaft: uses all standard Coats accessories

PREPAID FREIGHT

ATEATEDGE-501-3PTAtlas® Edge 501 Alignment Machine with 3-point FastClamp Wheel Clamps• Precision CCD measuring• 8 camera optical system• Bluetooth® wireless sensors• Cart style cabinet with printer,

LCD monitor and keyboard• 4-key operation

This revolutionary alignment system features the latest aligner technology available from one of Europe’s premier manufacturers. This system combines blazing speed, precision accuracy, and reliable Bluetooth® wireless communication all at a very affordable cost.

WHEEL BALANCERS

$5,995.00

$4,907.00

$3,585.00

$11,995.00


23

WHEEL BALANCERS

WHEEL BALANCER

ATEATWB41Computer Wheel Balancer• Rim sizes: 10”-32”• Max. wheel weight: 150 lb.• 110 V/1-phase• Display in standard or metric units• Self-diagnosis/self-calibrationDesigned for higher volume shops, the WB41 has all the same features as the WB11 with a larger wheel weight capacity tray and easy to read raised monitor.

ATEATWB-40NUT-N40mm Quick-release NutThe Atlas® quick release nut fits 40mm wheel balancer shafts with 3mm thread pitch.

ATEATWB49Computer Wheel BalancerDesigned for higher volume shops, the WB49 has all the same features as the WB41 with automatic data entry and easy to read raised monitor.

AMM1100ACoats® 1100 Series Wheel Balancer• Direct drive motor with 40MM shaft• Static-On-Screen®• Behind the spoke tape weight placement• Dual operator mode Note: Ammco Coats Warranty Does Not Apply in Puerto Rico and Guam

AMMV2003DAVero V200 Series Wheel Balancer• High volume, direct drive wheel balancer• Industrial Touchscreen• Integrated laser guided weight placement• ProBalance technology• Enhanced residual static minimization

WHEEL BALANCERS

ATEATWB11Computer Wheel Balancer• Rim sizes: 10”-32”• Max. wheel weight: 150 lb.• 110 V/1-phase• Display in standard or metric units• Self-diagnosis/self-calibration

$1,535.00

$1,865.00

$4,159.00

$8,035.00

$1,265.00

$85.00


24

BRAKE LATHES

AMM4000EModel 4000E Digital Brake Lathe• Custom Digital Finishes: by digitally

controlling the feed rates, it’s easier to find that sweet spot for your particular application that gives you the highest possible quality finish available

• Shift On the Fly 3 Speed: integrated synchronous gearbox and shifter, choose the speed that makes the most sense for your workplace

• Forged alloy steel arbor; two tapered mounting surfaces add stability and handle up to 200 lbs.

• Feed slide protection: keeps travel surfaces free of dirt and chips• All Ammco brake lathes are precision tools that cut to one-thousandth

of an inch tolerances

AMM4000BSPCombination Single Speed Lathe for Brake Drums and Rotors• One cut finishes• Positive rake tool bits• Forged alloy steel arbor• Patented floating spindle design• Patented positive oiling system

Note: Ammco Coats Warranty Does Not Apply in Puerto Rico and Guam

FREE AMM900002 & AMM2500 with purchase of AMM4000BSP$2,109.99 Combined Retail Value! FREE Goods Subject to Change Good While Supplies Last

PREPAID FREIGHT

PREPAID FREIGHT

AMM2500Bench Kit for all Ammco Lathes• Drop Ship Only

BOSOCL8850On-Car Brake Lathe• The OCL quickly turns and resurfaces

rotors without disassembling or removing components of a vehicle’s braking system

• Bosch’s caliper-mounted unit eliminates run-out

• Standard adapters to fit most vehicles, eliminating the need for additional investment in vehicle-specific adapter

• Two-speed lathe setting for initial and smoothing grinds• Bi-directional lathe feed, eliminating the need to “flip” the lathe

ON-CAR LATHE

CALIPER - MOUNTEDEliminates Run-Out

SILENCER BANDS FOR ROTORSAMM6920 Ventilated Rotor Silencer Band Easily wraps around ventilated rotors to dampen machining vibrations

NON-VENTED ROTOR SILENCER BAND (2 PK)AMM69216.500 (165.10MM) diameter; for use on thin solid rotors AMM69229.250 (234.95MM) diameter; for use on thin solid rotors

SILENCER BAND FOR DRUMSAMM5280 1-3/4” Drum Silencer Band Extra long, premium grade rubber silencer band for automotive drums

* Leasing Available with Approved Lease

Purchase of Adapter Kit Mandatory!

$9,739.00$7,515.00

$8,995.00

$25.27

$9.05

$9.05

$36.09

$906.19


25

ATEATTC-LHALeft-hand Assist Arm• Fits Atlas® 200 series and 700

series tire changers

ATETAXP-MHPPPlastic Inserts for Mount/Demount Heads• Includes two (2) of each insert• Fits Atlas® 200/700 series tire changer mount/ demount heads

ATEATTC-SPJPSmall Plastic Jaw Protectors• Set of four• Fits all Atlas® tire changers and adapter

ATEATPK-TURNTABLESPair of alignment turntables

ATEATTC-QCHAKQuick Change Head AssemblyFits Atlas® TC221, TC229, TC289, and TC755 Tire Changers.

ATEATTC-HFCHands-free Clamp

ATEATTC-DX-ATVDeluxe ATV Adapters

ATEATTC-PMHPlastic Mounting Head for the Atlas® 200/700 Series Quick Change AssemblyNote: This is the plastic head only. It does not include the Quick Change Union. ATETAXP-BBSRP

Bead Breaker Shovel Protector• Fits Atlas® 200/700 series tire changers

ATEATTC-DX-MCDeluxe Motorcycle Adapters

AMM940410 Carbide Bits-Positive Rake (10 Pack) • FMC/John Bean/Barret

FOR AMMCO LATHESAMM6914-10 Negative Rake Carbide Insert (10 Pack) (For models 1000, 2002, 3000, 4000, 4100, 7000, 7700)

AMM6918-6Positive Rake Carbide Insert (6 pack)

ALL B LATHES REQUIRE ONE OF THE FOLLOWING ADAPTER KITS FOR USE (Drop Ship Only)

AMM1175 Clamp-on Silencer

AMM9183 Non Asbestos Replacement Pressure Pad (2 Pack)

AMM940435 Carbide Bits-Positive Rake (10 Pack) • Accuturn

AMM940415 Carbide Bits-Positive Rake (10 Pack) • Kwikway

AMM900003Adapter Kit “C”, Passenger Car & Lt. Trk. Thru 1 Ton, 1” i.d. • Includes: 909232, 903125, 909492,

909310, 909313, 909233

AMM900002 Adapter Kit “B”, Passenger Car & Lt. Trk. Thru 1/2 Ton, 1” i.d.• Includes: 909232, 903125, 909492, 909310

AMM900001Adapter Kit “A”,Passenger Car, 1” i.d. • Includes: 909232, 903125, 909492, 909311

ACCESSORIESTIRE ACCESSORIES

BRAKE LATHES ACCESSORIES AMMCO BRAND QUALITY FOR OTHER BRANDS OF BRAKE LATHES

ACCESSORIESBRAKE LATHES

$16.00

$65.00

$215.00

$215.00

$55.00

$215.00

$16.00

$745.00

$16.00

$365.00

$27.09

$41.49

$67.65

$14.57

$75.19

$50.25

$1,119.99

$1,275.79

$2,219.99

$57.97


26

BLASTING CABINETSALC4039030” x 20” Plastic Benchtop Cabinet Blaster• Made of tough LDPE polymer• 30” x 20” work area• One piece construction (no leaks)• Self adhesive underlay• Pistol grip trigger gun with 1/4” nozzleAlso features an overside top window/door. Weighs 34 lbs. Made in the U.S.A.

ALC4040236” x 24” Top and Side Door Trigger Gun Abrasive Blasting Cabinet• 100 cfm dust collector included

with all steel cabinets• Heavy duty 14 gauge steel -

welded seams• Full width top drawer• Rubber gloves included• Made in the U.S.A.• Work area: 36”W x 24”H x

24”D. Height: 60”. Cushioned foam armholes.

ALC4040848” x 24” One Door Trigger Gun Abrasive Blasting Cabinet• 100 cfm dust collector

included with all steel cabinets

• Made in the U.S.A.• This model does not have

a side door or a foot pedal

ALC4040336” x 24” Top and Side Door Foot PedalAbrasive Blasting Cabinet• 100 cfm dust collector included with

all steel cabinets• Heavy duty 14 gauge steel - welded seams• Full width top drawer• Rubber gloves included• Made in the U.S.A.Work area: 36”W x 24”H x 24”D. Height: 60”. Cushioned foam armholes.

ALC40391Plastic Floor Model Cabinet Blaster • Rubber gloves included• Recommended use with shop vacuum (not provided)• Requires 36” x 24” x 24” floor space• Rear support frame• Made in the USAThis plastic model floor cabinet blaster is made of tough LDPE polymer. It has a unique clam shell design, with a top that opens. Also it’s made with durable construction, steel angle support legs, and a window lens: 15-1/2” x 33”. Made with quality and durability to last!

ALC41500Triple Door, Foot Pedal Cabinet with Dust Collector• Top door and 2 side doors• Dust collector mounted on the rear of the cabinet• Foot pedal operated • Heavy duty blast gun • Easy assemblyThis cabinet has a full width top door and two side doors for easy access. It has a 90 cfm dust collector mounted on the back of the cabinet. It is foot pedal operated for more control. It has a heavy duty blast gun with long lasting nozzles. It can be assembled easily with nut and bolt assembly. No holes to drill, just use a screwdriver to assemble. Includes a fluorescent light.

$1,492.00

$1,779.00

$1,437.00

$752.00

$543.50

$1,399.00


27

OTC5280Diesel Particulate Filter (DPF) Cleaner• OE tested and Dealer recommended

– By many major diesel engine manufacturers.• Robust design – For long shop life. Can be used as part of

a preventative maintenance program.• High Pressure cleaning process for thorough cleaning of ash from DPF

– produces 10 times the burst energy of competitive low pressure units.• Initial Burst Quick check

– To identify filters too plugged for proper cleaning.• Movable with locking wheels – For placement throughout the shop.• Computer Controlled Process Based on OE Requirements

– for “Start to End”cleaning without constant technician monitoring.• Containment of hazardous ash – For easy disposal.• HEPA Filter Air Exhaust System

– To exceed environmental air standards for shop.• Operates on standard 115V outlet.• Proven to clean to over 92% efficiency. (3)

(3) Third-party OEM test results using pin gauge measurement with approved SPX adapters and burst cycles. Actual results may vary.

OTC5281DPF Thermal Processing UnitThe 5281 DPF Thermal Processing Unit is a device which will thermally regenerate a DPF unit at a controlled, pre-programmed rate. Sometimes, the DPF cannot be regenerated on the truck due to a failure with the vehicle’s own regeneration system, or in the case of retrofit applications, a lack of an on-vehicle regeneration system. Thermal regeneration of DPFs is used in conjunction with the OTC 5280 DPF Cleaner, and maximizes the cleaning efficiency of the cleaner.

Designed to facilitate the cleaning of dirty filters – especially those with high amounts of wet soot, and unburned hydrocarbons.

• Pre-programmed thermal profile controls temperature ‘ramp up’ and ‘cool down’ to protect DPF from thermal shock, reducing the risk of DPF cracking.

• Holds temperature constant for two hours to ensure complete regeneration of filter.• Built-in safety door lock and electronic door switch prevent unauthorized opening

of the door when temperatures exceed 200 degrees F.• Large chamber accommodates various DPF sizes and shapes. Front access door

allows for easy access to the thermal chamber.• Includes both standard cycle and “pre heat” cycle for oil-soaked filters.• Internal chamber dimension: 24” (L) x 24” (W) x 26” (H).

OTC5286Portable Diesel Particulate Filter Cleaner• Lightweight and highly portable - ideal cleaning system for use

in the shop or on a service truck• Flexibility - clean DPFs from 6” to 15.5” in diameter using shop or

compressed air of at least 100 PSI• No internal filters to clean or replace• Focused Air Jet Technology™ - concentrates a precise high pressure

stream of air directly into every cell • Rugged design provides maximum durability

DOWDEF-1ADEF (Diesel Emission Fluid) 55 Gallon Drum Dispensing System• The Fuel Chief System is one of the industry’s

first “all inclusive” service systems for refilling a vehicle’s onboard Urea system tank

• Maximum head 12’ Pumping DEF @ 5.7psi• 120 Volts, 60 Hz, 2 full load amps • 40” suction tube • Up to 6 G.P.M.The Fuel Chief line has been specifically designed for the convenient and safe service of the new SCR (Selective Catalyst Reduction) systems that require filling during normal service operations.The Fuel Chief Systems were the first in the industry to receive any domestic vehicle OE approval, and in many circles are considered the leader in Urea dispensing today!

DEF


DEF

$19,995.00$9,999.00

$10,999.00

$1,949.00


28

Evaporative Cooling Units• Lowers ambient temperatures an average 20 degrees F• FREE Vinyl Covers with purchase while supplies last

PORPAC2K36HPVS • 36” 2-speed fan• 20 gallon water reservoir• Cools 2,650 sq. ft• Operates on 110 volts and tap water

PORPAC2K482S• 48” 2-speed fan• 22 gallon water reservoir• Cools 3,500 sq. ft• Operates on 110 volts and tap water

PLC6622-350248” Single Speed Evaporative Cooling Fan• 17.500 cfms, cooling area: 4000 square ft.• 230 voltage • Single speed• Hinged top cover for easy access and maintenanceOther features include: 13.5 gallon reservoir; large wheels for extreme mobility; controls and valves are in a protected location; uses the thickest and longest lasting pads in the industry; coated pad edges for easier cleaning and durability, drain plug for easy drainage and heavy duty cord sets.

PLC6622-250236” Variable Speed Portable Evaporative Cooling Fan• 10,000 cfms, cooling area: 3000 square ft. • 115 voltage• Touch pad controller interface with LED indicators, 10 speeds available• Low water automatic prompt shut-offOther features include: 12.5 gallon reservoir; large wheels for extreme mobility; hinged top cover for easy access and maintenance; controls and valves are in a protected location; uses the thickest and longest lasting pads in the industry; Coated pad edges for easier cleaning and durability, drain plug for easy drainage and heavy duty cord sets.

NOW Freight

Pre-Paid

In Stock

SHOP COOLING


$2,999.00

$3,799.00

$3,495.00

$4,099.00


29

AC \ VENTILATION

CrushProof® and the CT logo are registered trademarks of Crushproof Tubing Co. in the United States and other countries and are being used with permission.

Flarelock Hoses • Made exclusively for cars & small trucks• Each end is flared to permit connection of two

or more links at the same time

CRU11AFLT2502.5” x 11 ft. (compact cars)

CRU11AFLT300 3” x 11 ft. (passenger cars)

CRU11AFLT400 4” x 11 ft. (gas trucks)

Tailpipe Adapters• Designed for easy adapting to all sorts of

vehicle tailpipes

CRU17AF475 - Oval adapter (3” x 6” oval) • Fits tailpipes oval 2-1/2” x 5-1/2”

CRU17AF575 - Oval adapter (3-1/2” x 8-1/2”) CRUF675 - Oval/Twin adapter (3” x 11”) CRU17ARA250 - Tailpipe/Stack AdaptersCRU17ARA300 - Bell Shaped Adapter

“Y” Connectors• Allows 3 hoses to be joined together• Rubber connector

CRU16LRY25 2-1/2”CRU16LRY30 3”

CRU16LDF252-1/2” Rubber Door Port

Door Ports CRU19MADF30• Allows hose to be vented through

the door 3” aluminum

MSC69100A/C COMPLETE RECOVERY SYSTEM WITH 30 LB DOT TANK• High performance oil-less compressor• High volume cooling fan design• Automatic low pressure Cut-Off Switch• Liquid compatible head-valve system• Safety high pressure Cut-Off Switch• Fully reinforced hard plastic casing• Made in USA

ROB17800BAdvanced 1234 Refrigerant Management CenterRecovers, recycles, evacuates, and recharges R-12, R-134a, R-22, R-502 MP and HP blends, and many more

• Ideal for refrigerated trailers, buses, RVs with multiple refrigerants• Lockout panel prevents mixing of refrigerants• Comes with two 50-pound tanks• Internal clearingIf your shop services a variety of vehicle types with different or multiple A/C and refrigeration equipment or systems, you need this machine.

ROB75700CoolTech Coolant Exchanger• Engine Off feature removes pulleys,

belts and fan blades from the safety equation• No additional ventilation required• Vacuum mode creates a “push/pull”

exchange process allowing the technician to safely remove high pressure in a hot system

• “Hands-off” transfer of used coolant to a bulk tank prevents spills and helps protect the technician

ROB34788NiA/C RRR and Evacuate Unit• Fully automatic operationImproved recovery

and charge performance - Exceeds SAE requirements

• Graphical display• Expandable - capable of additional feature

and function add-ons (printer, wireless, refrigerant ID)

• Automatic Internal tank fill98.5% Recovery• R134A

CPSFX1234A/C RRR and Evacuate Unit• 7” Color touch screen control panel• Patented oil-less compressor• Patented motor-controlled ball

valves• SAE J28431-2-5 Warranty

PMS-185 and black

PMS-185 and black

AC / VENTILATION

VENTILATION

$7,196.00

$4,829.00

$7,539.00

$2,465.00

$1,429.00

$105.29

$127.79

$209.95

$34.89$42.39

$43.19

$39.60

$53.99

$106.95

$39.95

$42.39

$31.65


30

GDL11-605 12 Volt, 450 Amp Start-All®

• 12 volt nominal, 450 amp cranking capacity• Volt and amp meter to monitor boosting output• Voltage regulated to protect on-board electronics• Antizap® voltage surge protection for

safer boosting• 30 ft., 1/0 gauge welding cable allows

convenient access to vehiclesThis small, compact, gasoline powered, heavy duty starter has 1000 amp full-power jaw clamps that allow higher amperage flow. Polarity and low battery LED indicators confirm proer connections. Features an electric start Briggs and Stratton Vanguard OHV engine with single switch for easy operation. Ideal for small fleets, in town trucks, rental and agricultural equipment. Dimensions are 12”L x 27-1/2”W x 26”H and weighs 315 lbs.

GDL11-61012V Start-All®, 700 AMPS• 12 Volt jump starting • 700 Amp output• Full voltage regulation • Volt and amp meter• Single cable, single switch for easy operationThis Electric Start, air cooled Briggs and Stratton Vanguard OHV V-Twin gasoline engine with 2-1/4 gallon fuel tank has the output necessary for starting heavy-duty vehicles and equipment. Performance you can rely on - start after start, year after year, and power that will crank engines in cold weather climates vehicle after vehicle. Powerful 12 volt jump starting in a compact size.

GDL11-620Start All® 12/24 Volt 700/350 Amp Generator• Voltage regulated - controls output voltage to a safe level for today’s vehicles• Surge protected with AntiZap provides

safer boosting• Volt and amp meter to monitor boosting output• 30’ 1/0 gauge. cable allows flexibility and

ease of use• 1000 amp full power clamps allow higher

amperage flowThe 11-620 has the output necessary for starting heavy duty vehicles and equipment. Performance you can rely on - start after start, year after year - and power that will crank engines in cold weather climates vehicle after vehicle. Powerful 12/24 volt jump starting in a compact size. Electric start, air cooled Briggs and Stratton Vanguard OHV V-Twin gasoline engine with 2-1/4 gallon fuel tank.

GDL11-621Start-All 12/24 volt 700 amp with AC Generator• Output: 12 volt nominal, 700 amp;

24 volt nominal, 400 amp• Cables and Clamps: 30ft., 1/O ga.

welding cables; 1000 amp full-power clamps

• AC Generator: 2000 watt, 1 duplex 120 volt, 20 amp outlet

• Voltage regulator with reverse polarity protection controls output voltage to a safe level for today’s electronics

• Surge protection with Antizap provides safer boosting

• Polarity and low battery LED indicators confirm proper connections

• Single DC boosting switch for easy operation• Engine: Electric start, air cooled Briggs and

Stratton Vanguard OHV V-Twin gasoline engine with 2-1/4 gallon fuel tank

SOLFMB1224 12/24V Fixed Box Commercial Jump Starter• 1800 CCA in 12 Volt mode • 900 CCA in 24 Volt mode• Includes 3 Group 31 batteries • Automatic 7Ax3 charging system• 16’ 4/0 jumper cable leadsProviding endless jump starts for commercial fleets or heavy construction equipment, this unit will start any 12 Volt or 24 Volt engine. Recharge using AC cord or connect permanently to service vehicle’s 12 Volt alternator harness.

STARTING / CHARGING

$500 VISA GIFT CARDWhile Supplies Last

FREE


FREE


FREE

$8,944.00

$8,655.00

$6,919.00

$8,499.00

$2,199.00


31

CMF415377500/9375 Watt Portable Generator• Heavy duty power: 7500 running watts/ 9375 starting watts• Low oil shut-off• 4 stroke, air-cooled engine• Electric and recoil start• Cast iron sleeve for durabilityComplies with both the U.S. EPA and state of California Air Resources Board (CARB) emission regulations.

CMF73536l Champion 2,000 Watt Gas Powered Inverter Generator• Quiet - Only 53 Dba. Great for campsites, RVs, cabins, and more• Lightweight - Only 48 pounds with built-in carry handle• Inverter Technology - Economy Mode - Engine automatically idles

lower when electrical load reduced, saving fuel and engine wear• CARB Compliant• US Forest Service Approved Spark Arrester• Features fully enclosed durable housing with easy carry handle,

1 - 120V Duplex outlet (5-20R), 1-12V DC Outlet, Overload Protection, Low Oil Sensor and Economy Mode Switch

• Includes: 12V DC Charging Cable, Oil Funnel and Spark Plug Socket• Dimensions: 19.3-inch (L) x 13.2-inch (W) x 16.3-inch (H)• 2 Year Limited Warranty

CMF76533Champion 3800 Watt Dual Fuel Portable Generator• 3800 running watts/4750 starting watts’

(Gasoline)• 3420 running watts/4275 starting watts’

(LPG)• RV Ready - TT-30R outlet• 120V AC load• Up to 12 hour run time at 50% load• Push button electric and easy pull recoil start• Low oil shut off sensor• USDA approved spark arrestor• 2 year warranty on material and workmanship• Dimensions: length 26.3’, width 24.8’ & height 22.9’

BATTERY / PORTABLE POWER

SOL300112 Volt Commercial Charger/Starter with Air Compressor• Jump starting power is determined by user-installed battery – recommended

battery size is 1000CCA. Requires Group 31 battery (not included) • Rugged, high impact case for durability plus large pneumatic wheels for easy

maneuverability over all surfaces 10 amp auto charger keeps onbaord battery charged and can be used to charge vehicles batteries also

• 5 ft. #2 gauge cable with industrial grade clamps. All cables (including power cord and air hose are retractable for easy management

• 150 PSI air compressor with automatic shut-off switch and hands free clip on air chuck. Compressor can inflate a 14” car tire in less than 2 minutes. Includes 1 year limited warranty.

SOLHT1224Heavy Truck 12/24 Volt Commercial Charger/Starter• Automatic 10 Amp battery charger • 1400 cold cranking amps in 12 volt mode • 800 cold cranking amps in 24 volt mode • 10’ jumper cable leads • Ships with (2) Group 31 batteries

BATTERY / PORTABLE POWER

$1,219.99

$1,863.00

$798.00

$798.00

$1,179.00

32

Super Quiet

IMC218V5HP 80 Gallon Vertical 2 Stage Electric Air Compressor• 208-230 volt single phase• Start-stop pressure switch control• ASME safety valves fully-enclosed belt guard• Tank drain and discharge valve• 2 year full warranty• 15.3 cfm @100 PSI.

IMC318VL7.5HP 80 Gallon Vertical Two Stage Electric Air Compressor• Start-Stop pressure switch control• ASME safety valves fully-enclosed belt guard• Tank drain and discharge valve• 208-230 volt, single phase• 2 year full warranty• 25.3 cfm @ 100 PSI.

IMC3G3HHL13 HP 30 Gallon Honda Two Stage Engine Powered Compressor• Two year warranty• 12 volt electric and recoil start• Unique E-Z pull tank drain• Fully enclosed belt guard• 12 volt charging system• 25.25 acfm• 75 PSi maximum pressure• 30 gallon horizontal ASME tank

IMC3G3HH11 HP 30 Gallon Horizontal Two Stage Gas Driven Air Compressor• 12 volt electric start and recoil start• Start key / panel• Honda engine• Fully enclosed belt guard• ASME tank and safety valves• 18.5 cfm• 175 PSI• 2 year full warranty.

IMC3G3HKL12 HP 30 Gallon Two Stage Engine-Powered Reciprocating Air Compressor 12HP• T39 pump has a solid cast iron cylinder• 12 HP Kohler Engine• 12 volt electric and recoil start• 25.25 ACFM at 100 PSI• Battery Charging system• 100% factory tested at full pressure• Shipped “wet” ready for use• Dimensions: 44-1/2 in. L x 19 in.

W x 45 in. H• Two year “Bumper To Bumper” Warranty!

IMC5020P2HP 20 Gallon Horizontal Electric Compressor• Horse Power: 2• Motor Volt/Phase: 115/230/1• Tank (Gal.): 20• ACFM@40/100 PSI: 7.1@100 PSI• Max PSI: 130

IMC216VSingle-Stage Vertical Electric Compressor• Horse Power: 5• Pump: T29S• Motor Volt/Phase: 208-230/1 • Tank (Gal.): 60• CFM Disp: 18.6• ACFM@100/175 PSI: 15.33• Max PSI: 165

IMC318VNTwo-Stage Vertical Electric Compressor• Horse Power: 5• Pump: T39• Motor Volt/Phase: 208-230/1 • Tank (Gal.): 80• CFM Disp: 22.43• ACFM@100/175 PSI: 18.50/16.60• Max PSI: 175

IMCQP338VLE7.5hp 3 Phase

IMCQP318VLE 7.5hp Single Phase

IMCQP318VE 5hp Single Phase

80 Gallon Quiet Piston Compressor• Low oil switch and automatic tank drain • Triple-pass pump mounted after-cooler • ASME safety valves fully enclosed belt guard• Includes a full 2 year warranty

AIR COMPRESSORS


$3,109.00

$733.39

$2,825.00

$3,039.00

$2,695.00

$1,625.00

$1,319.00

$2,047.00

$4,299.00

$4,135.00

$4,220.00

33

AIR COMPRESSORS

2 Stage Air Compressors

Rotary Screw Air Compressors

Part # HP CFM Voltage Tank Configuration Start-Up Kit

Value Packages

IRTC2340L5 5 14.7 230/1/60 60 Vertical 32305880

IRTC2475N7.5 7.5 24 230/1/60 80 Vertical 32305880

Value Plus Packages

IRTC2545K10-VP 10 35 230/3/60 120 Vertical 32305898

Premium Packages

IRTC2475N7.5FP 7.5 24 230/1/60 80 Vertical 32305880

Part # HP CFM MAX PSI Voltage Tank

Standard Packages

IRTUP6-7.5-150 7.5 25 150 230/1/60 80

IRTUP6-10-150 10 34 150 230/3/60 80

IRTUP6-15C-150 15 50 150 230/3/60 80

Total Air System PackagesIRTUP6-7.5TAS-150 7.5 25 150 230/1/60 80

IRTUP6-10TAS-150 10 34 150 230/3/60 80

IRTUP6-15CTAS-150 15 50 150 230/3/60 80

IRTCSS3L3Single-Stage Vertical Electric Compressor• Horse Power: 3 • Pump: Single Stage Cast-iron• Motor Volt/Phase: 230-1 • Tank (Gal.): 60• Max PSI: 135• ACFM@100/175 PSI: 11.3/10.3 (90/135 PSIG)

IRTP1.5IU-A9Garage Mate Single-Stage Air Compressor• Horse Power: 2 • Pump: Single Stage Cast-iron • Tank (Gal.): 20• Max PSI: 90

IRT2475F14G14 HP Gas Drive Air Compressor - Kohler Engine• Horse Power: 14 • Tank (Gal.): 30• Max PSI: 175• ACFM@100/175 PSI: 25

IRTC2475F13GHTwo-Stage Gas Powered Air Compressor• Precisioned engineered components

for over 15,000 hours of trouble free use• Tank (Gal.): 30• Max PSI: 175

IRT46821567Start Up Kit for Air Compressor Model 2475F14G• Purchase of Start Up kit increases pump

warranty to 2 years• Includes oil and air filter elements

Ask your salesman for leasing options

AIR COMPRESSORS

$1,595.00$2,715.00

$2,969.00

$3,375.00

$5,532.00$6,169.00$6,749.00

$6,827.00$8,279.00$9,185.00

$857.97

$872.39

$2,939.00

$151.00

$3,199.00

34

MPS188001Pro-Link IQ Diagnostic Scan Tool• Saves time by automatically scanning for all

vehicle ECUs to identify types and display active and inactive faults - no need to switch between an engine, transmission or brake application

• OEM proprietary applications feature manufacturer specific terminology, additional fault codes, parameters, reprogramming and special tests if applicable

• Intuitive, easy to use, color touch screen displays multiple codes, ECU data list parameters, graphs, and records at the push of a button

MPS682020Complete Abs Software Kit For Pro-Link Iq• Read Fault Codes, Clear Fault Codes,

View Brake Data• Coverages ABS Suite and Trailer ABS Suite• Includes: Complete ABS Kit PN 682020,

Trailer Kit PN 682021, ABS Suite PN 682014, Trailer ABS Suite PN 882021, Meritor WABCO® Suite PN 888014, BENDIX® ABS Suite PN 889013 and J560 PLC Adapter PN 602020

The Pro-Link iQ ABS product family provides brake coverage for a wide range of applications, making the Pro-Link iQ the industry scan tool of choice for heavy-duty brake diagnostics. With the introduction of the ABS Suite, the Pro-Link iQ is now a full-service brake scan tool, providing connectivity to tractors and trailers utilizing the SAE J1587communication protocol. The Complete ABS Kit also comes with a new J560 PLC seven way adapter (available separately) that allows direct connection to a trailer without thet ractor. With access to a broad array of special tests, technicians can quickly and easily obtain a reliable and accurate diagnosis of brake status.

IPA9008-SESuperMUTT® Deluxe Trailer Tester with Standard Equiptment• Perform leak down test on service and emergency lines• Adjust slackers and measure pushrods using

remote control• Power lights individually, all at once,

via auto scan or remote control• Pulses power to shorted and overloaded circuits

(patented Pulsar® technology)• ABS fault codes via Aux and brake circuit activation

(i.e. Wabco/Bendix Tab-6 systems)• Includes: remote control, 5 ft. 7 way cable, chassis

ground cable, external battery connector, 6 ft. glad hands

IPA9008-DLSuperMUTT® Deluxe Trailer Tester with Deluxe Equipment• Perform leak down test on service and emergency lines• Adjust slackers and measure pushrods

using remote control• Power lights individually, all at once, via auto scan

or remote control• Pulses power to shorted and overloaded circuits

(patented Pulsar® technology)• ABS fault codes via Aux and brake circuit activation

(i.e. Wabco/Bendix Tab-6 systems)

MIDEXP-1000-HD-AMPDigital Battery and Electrical System Analyzer with Inductive Amp-Clamp for Heavy Duty/Fleets

MIDEXP-1000HDAMPKITHeavy-Duty Expandable Electrical Diagnostic Platform• Cable voltage drop testing and mutimeter capabilities• AMP testing capabilities including parasitic draw• Tests Flooded, AGM, & AGM spiral batteries• Automotive & Commercial / Fleet Battery & Electrical

System Analyzer with Heavy-Duty Clamps, DDM Leads & Clamps, Amp-Clamp, Printer, & Case

OTC3417HD Scan - Heavy Duty Scan Tool

• Class 4 – Class 8 truck coverage featuring “Automatic Protocol Search”. HD J1587 / J1708 and J1939 CAN, Engine, Transmission/ABS coverage and more!

• Live vehicle data such as: engine speed, engine ECU temperature, percent acceleration pedal position, engine intercooler temperature, engine coolant temperature, battery volts, alternator volts, ambient air temperature, and air inlet temperature

• Fast Global OBD II Quick Test; Gasoline and diesel engine coverage; Vehicle data communication and power LED indicators

• Demo mode permits operation without vehicle connection; supports multiple Global OBD II trouble code requests, generic codes (mode 3), pending codes (mode 7), enhanced codes, and GM DTC status

• Automatic recording of data; customize data views in line graph, LED, or digital format with the push of a button

OTC3874HDGenisys EVO™ Scan Tool Deluxe with USA 2012 Kit with Domestic / Asian / ABS and Heavy Duty Standard Software• Includes the NEW Genisys EVO featuring System 5.0 with Code-Assist™• NEW USA 2012 Domestic / Asian with ABS software including Pathfinder• BONUS USA 2011 European software• Heavy-Duty Standard software with cables• European 2011 Software installed

RDL95-0003BSmoke Pro® Total Tech® Diagnostic Leak Detector Kit• New sensitive flowmeter to locate the toughest to find leaks• No need to use inert gas• OEM Approved smoke producing oil

DIAGNOSTICS

$1,423.00

$1,749.00

$2,189.00

$2,769.00

$1,199.00

$1,685.00

$1,595.00

$1,795.00

$3,350.00

35

NRS11201JPRO Fleet Service Software Bundle for Heavy Duty Truck RP1210 Scan Tool Diagnostics• Works with OEM Engine, Transmission,

or Braking System in the Heavy Duty arena• Allows you to record real time information for easy play back• Displays Active and Inactive Fault Codes for easy diagnosis of the problem• Works seamlessly with OEM Software for additional command and control of specific systems• Toggle between each system without having to launch, or even have, multiple OE diagnostic programs

NRS63025JPRO Semi-Rugged Fleet Service Kit with DLA+ Adapter• Kit includes JPRO Heavy-Duty Software, Panasonic Toughbook CF-53,

Noregon DLA+ Adapter, 9-pin (Dual-CAN) cable, 6-pin cable, USB cable and rugged carrying case

• Displays all heavy-duty fault codes• Provides a total vehicle diagnostic approach• Saves time by providing a simple, one screen vehicle diagnostic view

NRS63050JPRO® Semi-Rugged Fleet Service Kit with DLA+ PLC• Displays all heavy-duty fault codes• Provides a total vehicle diagnostic approach• Saves time by providing a simple,

one screen vehicle diagnostic view• DLA+ PLC Adapter works with

all OEM component software (sold separately)

• Comes with Panasonic CF-52 Semi-Rugged Computer

NRS63075-NSJPRO® Semi-Rugged Fleet Service Kit with DLA + Wireless Adapter• Panasonic Toughbook CF-53 (with 3 year warranty)• JPRO® Commercial Vehicle Diagnostics

Heavy-Duty software module• JPRO® Next Step Service Information software module• JPRO® DLA+ wireless adapter• 9 pin Dual CAN cable, 6 pin cable, and 15’ USB cable• Carrying case

NRS73025JPRO School Bus Semi Rugged Fleet Service Diagnostic Kit• Reduce costs, improve safety• Reduce reliance on spare buses• Yellow Bus Adapter• Includes DLA, Ford and GM• Software, adapters, semi rugged

laptop included

DIAGNOSTICS

NRS63075JPRO® Semi-Rugged Fleet Service Kit with DLA+ Wireless• Wirelessly displays all heavy-duty fault codes• Provides a total vehicle diagnostic approach• Saves time by providing a simple,

one screen vehicle diagnostic view• DLA+ Wireless Adapter works with

all OEM component software (sold separately)

• Comes with Panasonic CF-52 Semi-Rugged Computer

SCAN TOOLS

$1,979.00

$5,799.00

$6,399.00

$4,973.00

$9,838.00

$6,010.00

PREPAID FREIGHT

OMEHW93300C25 Ton Press with Accessory Kit• Excellent for bending, bonding or straightening applications• Multi-position bed for

work height adjustment• Heavy steel welded construction• Includes hand winch for easy

bed adjustments• Includes 25 ton press accessory

kit and arbor plates

SHOP EQUIPMENT

ASTTS2220 Ton Capacity Hydraulic Press• Heavy duty return springs for fast ram retraction• Reinforced head plate• Arbor plates included • Safety bypass valve assures unit will not exceed rated capacityOverall height: 59-3/8”; base width: 26-3/8”; hydraulic stroke: 5-3/4”; press bed width: 22-1/2” x 4. Meets ANSI standard for performance and safety.


OTC182517-1/2 Ton Open Throat with Hand Pump Floor Press• Head is movable from side-to-side for full

off-center load pressing.• Ram-to-work distance is adjusted by a forcing screw

that’s extended or retracted with a speed crank.• “Open Throat” feature is great for bulky jobs, and

allows ram to be mounted outside press frame.• 17 1/2-ton “Open Throat” press with 201832 ram

with 2” stroke, 4002 hydraulic hand pump, 9650 gauge, 9767 hose (1/4” I.D. X 6’), 32118 adjusting screw, 24814 speed crank, 28228 ram cap, and 42733-WH2 pump mounting bracket.

OTC183425 Ton Capacity Shop Press• Tough, economical press is ideal for

pressing rear axle bearings, piston pins, and much more

• Large 30” x 46” work area under ram makes positioning of even bulky work easy

• Press bed is easily raised and lowered by a dependable lifting mechanism

• Press complete with air-driven No. 4020 hydraulic pump; No. 9652 gauge; No. 21815 tee; No. 9768 hose and hydraulic ram with 6-1/4” stroke

KTI6361920 Ton Shop Press• 20 ton capacity shop press made of

structural steel channel for added strength• Pump, 7.28” stroke self-retracting ram and

hose with glycerine filled gauge• Vertical throat opening between 0” to 38”,

21.25” throat width• 4.25” opening between movable

bolster channels• 59.5” frame height, 25.25” width,

and 27.5” base leg length• Complies with ASME PALD/2009

safety standards• 2 Year Warranty on material

and workmanship

36

$494.99

$4,125.00

$3,305.00

$660.63

$3,329.00

37

MLK60942036 Piece Universal Press and Pull Sleeve Kit• Includes: 20 sleeves (74 to 112mm

inside diameter in 2mm increments), 4 step discs to match sleeve sizes,

• 1 spindle TR20 short and 1 long with inside adapter thread (M10, M12 and M14), 2 adapters for step discs,

• 2 nuts (M10, M12, M14 and M16 with bearing), Counter nuts (M10, M12 and M14) and Spindle Grease.

SUN5250EP50 Ton Capacity Electric Production Press with Winch• US built welded press frame to prevent excessive

flexing under maximum load• Reinforced head bolster for added strength• 2HP Emerson electric motor, 100 volt• Winch with non-slip safety clutch and steel cable

rollers for easy raising and lowering of press bed 4” diameter gauge reads internal working pressure and force in tons. Heavy duty internal springs for fast ram retraction. Bed plates, bearing punch and bearing shield included as standard equipment. Table range from 1.5” to 34”; Height: 74”. Made in the USA.

SHOP EQUIPMENTSHOP PRESSES

OTC185055-Ton Capacity Economy Shop Press• Durable steel frame resists

buckling and bending• Hand-operated winch and cable

mechanism adjusts lower press bolster• Includes hydraulic ram

with 6-1/4” stroke• Also includes; hydraulic hand pump,

gauge, hose, and pump mounting bracket• Covered by OTC Lifetime Marathon W arranty

OTC185155 Ton Capacity Economy Shop Press • Durable steel frame resists buckling

and bending. Covered by OTC lifetime Marathonm Waarranty ®

• Hand-operated winch and cable mechanism adjusts lower press bolster

• Air/hydraulic pump (4020)

OTC188255 Ton Press Accessory SetSet Includes: No. 1126 bearing pulling attachment, No. 34755 ram pushing adapter with 1” dia. shank, No. 34756 ram pushing adapter with 1-1/4” dia. shank, No. 34808 V-pushing adapter, No. 1892 14” long V-blocks (pr), No. 28230 ram forcing cap and No. 37368 threaded adapter – for single acting only.

OTC1857100-Ton Capacity Heavy-Duty Shop Press• Wide open uprights allow easy positioning of bars

and shafts for straightening or bending.• Upper bolster can be lowered for convenient positioning during repetitive jobs.• Ram head glides smoothly on rollers for easy horizontal adjustments; rugged press

frame will withstand a full capacity load with the ram head in any position across the upper bolster.

• Covered by OTC Lifetime Marathon Warranty®Includes single-acting No. 52434 ram with 10” stroke; No. 4008 hydraulic hand pump; No. 9651 gauge; No. 9781 hose (3/8” ID x 10’); and pump mounting bracket.


$1,389.00

$5,274.00

$1,099.00

$10,589.00

$5,625.00

$6,039.00

38

SHOP EQUIPMENT

OTC1854100-Ton Capacity Economy Shop Press with Electric/Hydraulic Pump• Hand-operated winch and cable mechanism gives operator precise

control in adjustment of lower press bolster to any height• Includes hydraulic ram with 10” stroke• Includes electric/hydraulic pump, gauge, hose, and pump mounting

bracket• Covered by OTC Lifetime Marathon WarrantyLarge 35” opening between press uprights allows easy handling of large gears, shafts, sprockets, and other components serviced in truck, construction, and agricultural equipment shops.

INT850SD20 Ton Super Duty Shop Press• Ideal for heavy duty truck

applications, spring shops, industrial, or every day shops that find themselves in need of a step up from a regular duty press

• A movable press head assembly and included V-blocks add versatility to these work horses

• These come complete with foot operated air motor assist pin, press adapter kit and mountable/removable retracting guard for added safety

• Overall Dimensions: 35 in. W x 64 in. H Bed Depth: 7 in. Bed Width: 19.25 in. Throat Depth: 5.75 in. Throat Width: 10.75 in.

OTC182625-Ton Capacity Heavy-Duty “Open Throat” Press with Hydraulic Hand Pump• “Open throat” feature enables

ram to be positioned outside of press frame for fast axle bearing removal and installation, as well as other tasks

• Press bed is raised or lowered with a hand crank, and a spring-return hydraulic ram is laterally adjustable for off-center work at full capacity

Includes 25-ton press. No. 4016 hydraulic hand pump; No. 52025 hydraulic ram with 14” stroke; No. 9652 gauge; No. 303563 hose (3/8” ID x 8’); and pump mounting bracket. Rugged press is covered by OTC Lifetime Marathon Warranty®

OTC184555-Ton Capacity Heavy Duty Press with Electric/ Hydraulic Pump• Covered by OTC Lifetime Marathon

Warranty®.• Hydraulic ram features 13” of stroke. • Includes single-acting ram No. 52380

with 13” stroke; No. 4044 electric/hydraulic pump; No. 9651 gauge; No. 303563 hose (3/8” ID x 8’); and pump mounting bracket.


$9,493.00

$1,129.00$4,923.00

$8,342.00

39

SHOP EQUIPMENT

MTNMIG6226225-Amp Commercial Shop (230-Volt) MIG Welder• Full size with cylinder shelf and 10 step output power• Welds from 22 gauge to 1/2” in a single pass with

.023”-.045” diameter wire• Package includes full-sized power source with cylinder

support, HD front casters and solid axle. Includes: TW2 style 250-amp torch 12’, work clamp, dual-gauge gas regulator, 10# spool .030” mild steel wire, 5-contact tips and operator manual.

MTNPC60163/16” 16 Amp (115-V) Genuine-Cut Inverter Plasma Cutting System• System clean-cuts material to 3/16”

and sever-cuts to 7/16”• Status LED indicators for power, low air

and over-temp with auto-reset• Built-in adjustable air regulator

with ~5 micron filter and air gauge

MTNPC60265/16” 26 Amp (230-V) Genuine-Cut Inverter Plasma Cutting System• System clean-cuts material to 5/16”

and sever-cuts to 9/16”

TITPLJRWPC45LT45 Amp Plasma Cutter• High performance and cutting capacity• Cutting Capability: As Thin as 0.02” Sheet

Metal Up to as Thick as 0.5” SteelUser friendly, lightweight and portable

• Built-in handle on unit makes it simple to grab and go

• Cutting edge inverter technology makes maintenance and repair simple and cost effective

• Can be used with portable power

WELDING / PLASMA CUTTING

JET354402JET J-2550 20” Floor Model Drill Press• Cast Iron head • Large quill• Head casting features a permanently lubricated ball bearing spindle assembly,

using four heavy duty ball bearings in an enclosed quill for longer life• Massive T-slotted production work table (Model J-2550 only)• Table tilts 45 degrees

JET354550JET J-A5816 15” Variable Speed Floor Drill Press, 1 HP, 115-230V, 1 PH• Speeds from 400 to 5000 RPM• Handwheel adjustment sets the speeds• Large 2-1/4” quill allows greater accuracy• 3” column diameter for maximum head support

DRILL PRESSES

DRILL PRESSESS / WELDING

$2,289.00

$1,209.00

$1,279.00

$1,142.00

$1,299.00

$2,235.00

40

OTC5077ATransfer Tanker with Electric Pump• Pump moves 5 gallons of liquid per minute through 8 ft. hose (110V)• Can transfer oil or antifreeze into 15 gallon reservoir• New fully enclosed electric motor• Screen attached to reservoir to allow it to be stored on its side• 4” free wheeling casters and removable handle

MTT500-8100Brake Vac II Brake Fluid Exchanger• Complete brake system flush in just 10 minutes• Pressure and vacuum assist ensuring quick operation• One man operation• Adjustable pressure regulator controls operating pressure• 1 gallon new fluid tank and removable waste tank allows for

multiple services• Fast and efficient brake bleeding system

DOWFC-25GC25-Gallon UL Listed Gas Caddy • UL Listed and complies with OSHA guidelines• Combination vent and fill cap• UL Listed pump • Fill level gauge • Heavy-duty steel wheels

LIN3669Low Profile Truck Drain with Electric Pump

LIN3667Low Profile Truck Drain with Manual Pump

DOWFC-P30A-UL30-Gallon UL Listed Steel Gas Caddy - Air Operated• UL Listed and complies with OSHA guidelines• 30-Gallon capacity steel tank • 4-way directional valve• For use with gasoline, diesel, kerosene, bio-diesel and transmission fluid

DOWJDI-LP4Low Boy Oil Drain - 17 Gallon Capacity• 48” long x 25 “ wide x 9 high • 9 low profile• Gravity or pressure drain • 6” casters• All-Steel Construction• Expanded Metal Screen Reduces Splash

DOWJDI-17PLP17-Gallon Poly Low-Profile Oil Drain• 17-Gallon High-Impact Poly Tank with T-Handle that folds for handy storage• (4) 5” heavy-duty casters• Expanded metal shield• Gravity drain valve• Lightweight and dent resistent

LIN3665Low Profile Truck Drain• Low-profile design can be easily positioned under high-clearance vehicles• Large 17 gallon (65 liter) capacity reservoir; reservoir molded of high-

impact polypropylene• 6 ft (1.8 m) long discharge hose with 3/4” male camlock connector for

fluid extraction• Four large 4” (100 mm) diameter swivel casters• Removable filter screen

FLUID HANDLINGSHOP EQUIPMENT

PLEASE NOTE: Many California jurisdictions have laws governing the temporary storage of gasoline. Please check with your local / county / California authorities regarding these laws before purchasing / using a Gas Caddy and / or storing gasoline – especially over night.

$589.99

$460.59

$363.87

$829.00

$3,675.00

$555.99

$732.50

$3,158.00

$398.49

41

FLUID HANDLINGFLUID HANDLING

LIN94354Medium Pressure Oil Reel Assembly 50’ x 1/2”• Made in the U.S.A. - all steel construction• Inlet/Outlet swivel fully ported for

unrestricted maximum flow, dispensing higher volumes of liquid

• Dual needle bearing design provides a smooth balanced operation

• 180 degree double ratchet teeth provide solid latch to lock hose in multiple positions

• Powder coated finish for longer life in your shopMaximum Working Pressure: 1,500 psi. Includes bare reel (94300), 50’ x 1/2” delivery hose (73600), ball stop (85517) and 2’ connecting hose (73024).

LIN94552High Pressure Grease Reel Assembly 50’ x 1/4”• Swivel includes quick disconnect for easy hose attachmentMaximum Working Pressure: 5,000 psi. Includes bare reel (94500), 50’ x 1/4” delivery hose (75600), ball stop (85515) and 2’ connecting hose (75024).

MTNHR2501/4” x 50’ Grease Hose Reel• 5000 lb. operating pressure• All brass main shaft and swivel• 5-1/4” width and 14-7/8” diameter• 2 Wire braided hose• Works for grease• Owner serviceable• Cartridge style spring• Fully closed bead• Excellent for off-road truck mounted applications• 1 year warranty on material and workmanship

MTNHRM5501/2 in. x 50 Ft. Air, Water and Heavy Oil Hose Reel• 2500 lb. operating pressure• Works for air, water and heavy oil• All brass main shaft and swivel• 5-1/4” W and 14-7/8” diameter• Owner serviceable• Cartridge style spring• Fully closed bead• 1 year warranty on material and workmanship

LIN4417Grease Pump Assembly - #120 Drum• 40:1 ratio professional quality pump assembly for the automotive repair shop• Includes 7’ hose, control valve, universal swivel

for easy operation, drum cover• Flexible follower plate for positive prime• 4 caster band-dolly for easy mobility around the shop

LIN917Air Operated Grease Pump• Will dispense 45 ounces or 80 cubic inches of

NLGI 0-2 grease per minute at 150 PSI.• Assures positive prime at lowest temperature• Drum cover 46007 finished in Lincoln red;

roll-a-round base 80895 base in black; air motor cover in white

• Height 43-1/8” • Base 17” square

Drum not included.

LIN989Heavy Duty Grease Pump for 25-50 lb. Drum• Steel cover securely clamps to any 25-50 lb

refinery container• Carrying handle provides portability• Follower plate assures positive prime at lowest

temperatures• Cover is rust-proofed and finished in Lincoln red

Bucket shown is NOT included.

LIN6917Air-Operated Portable Grease Pump Package• Lincoln’s time tested 50:1 double acting grease pump

is at the heart of the package• High volume and pressure to handle additional hose

length and/or adapt to hose reel• Smooth, easy to use and quiet for improved

environment, ergonomics• Standard follower wipes 120 lb. drum sides clean and

keeps the drum primed• Four-wheel dolly maneuvers easily around the shopThe LIN6917 is easy to use and operates quietly, improving the shop environment. Package includes: high pressure 50:1 pneumatic pump, high pressure Grease Control Valve, universal swivel and Coupler and 7’ hose; drum cover, flexible follower plate and band dolly with wheels. Portable, heavy duty air powered grease lubrication for light and heavy vehicles, agricultural and construction equipment.

FLUID HANDLING

IPADTP2020 GPM Mobile Fuel Transfer System• DC Powered, includes Filter and Water

Seperator, two 6’ hoses and manual fuel dispenser

• For Truck Service and Repair, scrapyards, emergency recovery and more!

• Secure and save fuel prior to repairs, scrap, storage or sale

• Uses two group 31 batteries (not included)• 1000 Gallon flow meter, voltage and

amperage meters

SHOP EQUIPMENT

$698.85

$705.25

$547.79

$515.00

$929.00

$1,874.00

$899.00

$1,179.99

$912.25

42

BENRP20FCOil Filter Crusher• Save on disposal costs and storage space• Fulfills EPA and other mandated environmental standards• No mess design operates clean and efficiently to lessen

spill hazards• Single control valve operation • Exclusive X-shape bevel in press head pre-aligns

filters for absolute vertical press

DOWHDC150Heavy-Duty Truck Filter Crusher• Heavy-duty aluminum frame cabinet

surrounds the high pressure hydraulic hose for added safety and shields components from damage

• Handles filters 13” in height; 6” in diameter• Unitized construction allows for easy

maintenance• Easy to operate: Load the filter and close the

door to activate the crushing cycle• Specially designed door channel prevents

drips and leakage, keeping oil in the chamber and not on the floor

UNRUFC850Pneumatic Pail and Oil Filter Crusher• Reclaims up to 95% of oil from used oil filter• Reduces trash volume up to 75%• 7 ton force at 120PSI• Crushes filters and cans up to 12.6 inches and

16.5 inches high• Safety door locks before crushing cycle begins

OTC182110 Ton Capacity Air Operated Oil Filter Crusher • Crushes up to four automotive filters (3-7/8” diameter x 9”

high) at one time, in approximately 20 seconds• Engineered and built for dependable operation• 100 percent air operation eliminates electrical connections• Generous size of crushing chamber easily accommodates the

largest automotive spin-on filters• Includes mounting stand, No wall mounting or time

consuming installation required

OTC187725 Ton Capacity Heavy Duty Oil Filter Crusher• Handles the big filters (up to 6” diameter and

12-1/2” long) found in trucks, construction equipment, farm implements

• Crushes filters to 1/4 of original size, removing up to 95 percent of filter’s oil capacity

• Automatic cycle feature: load the filter, push a button, and walk away

• Air/hydraulic pump works on standard shop air (requires 9 CFM at 100 psi)• Built-in floor stand (completely assembled)If your shop concentrates on heavy-duty service, our 25-ton heavy-duty filter crusher is right for you. It can be used for automotive and light truck filters as well as the big filters. Features a special valve to return the ram automatically. No electrical connections needed. Whole unit requires just 5 square feet of floor space. This is also covered by the OTC Lifetime Marathon Warranty.

OTC189625 Ton Capacity Air/Hydraulic Automotive Oil Filter Crusher• Crushes automotive and heavy-duty filters up to 15-1/4” long and 6” diameter • Filters are reduced to 20 percent of original size, with 95 percent of residual oil removed• Automatic cycle feature lets you load the filter, push a button, and walk away• Powered by 2 hp electric/hydraulic pump, 230 volt, 20 amp, 60 cycle, single phase, 3,450 rpm• Has 2-gallon reservoirBuilt-in, heavy-duty floor stand with leveling pads is designed to accept a 30-gallon drum for oil drainage. Made in U.S.A. and covered by Lifetime Marathon warranty and registration.

SHOP EQUIPMENTOIL FILTER CRUSHERS

$4,086.00

$1,397.00

$2,736.00

$2,392.00

$4,326.00

$7,107.00

43

SYM05015000Battery Charger for HBA 5/HBA 5P

SYMSCA1Headlamp Alignment System• Not for state inspection in Maryland or Virginia• ISO color technology finds lamp hot spot• Includes laser floor slope, has field calibration,

and is repeatable and accurateSYMHBA5Headlamp Auditing System• User Friendly• Rechargeable, replacement battery pack• Laser Floor slope assesment• Field calibrate-able• Multi-bay uasage

SYM05011500Battery Pack for HBA 5/HBA 5P

SYMBCA4Headlight Aimer• ISO Color technology • Laser - determines floor slope• Floor slope adjustment • Fresnal lens - allows for misaligned pattern

SYM03013000Laser Assembly for All Aimers Except HBA5

OIL FILTER CRUSHERS

CPT7782-61” Drive Heavy Duty Impact Wrench with Extended Anvil• 2,140 ft.lbs - of maximum torque in reverse• Pinless closed reinforced rocking dog impact mechanism• Socket retainer ring combined with hole retainer• Full teasing triggerRegulator with integrated forward/reverse with

3-position power settings in both directionsHigh efficiency motor, yet economical with durable reinforced clutch mechanism. Highly durable impact wrench with great power for the toughest jobs on heavy vehicles.

IRT2801” Drive Super Duty Air Impact Wrench• 1,600 ft./lb. of maximum torque• Working torque range: 150-1000 ft./lb. / 204-1360 NM• Blows per minute: 750 • Free speed: 6000 RPM • Standard bolt size: 1-1/4” / 32 mm • Weight: 22 LB. / 9.98 KG. • Built-in pressure-feed lube system

IRT2901” Drive Super Duty Air Impact Wrench• Designed for getting into cramped

spaces with big power, the IRT290 has a three-way adjustable handle

• It’s a good choice for spring work, tractor pads, bus maintenance, and off-road and farm equipment

• Up to 1,600 ft/ lbs. of torque• Pressure-feed lube system for long life• Adjustable side handle for better control

IRT2931” Drive Super Duty Air Impact Wrench• Up to 2,000 ft.-lbs. of torque • Most powerful 1” wrench• Long-lasting tool • Handle exhaust

AIR TOOLS

AIR TOOLAIR AND TIRE TOOLS

SHOP EQUIPMENTHEADLIGHT AIMING

$1,825.00

$3,219.00$657.99

$1,749.00

$1,995.00

$45.00

$31.15

$716.50

$57.59

$979.99

44

TIRE TOOLS

GAIBB6LBead Bazooka™ Bead Seater• Most powerful release mechanism on any

bead-seating tool• Half the weight of other bead-seating tools

- only 14 lbs.!• Push-button trigger allows users to keep both

hands on the tank for more control• Fits in the side box of tire service trucks for

protection from damage and theft• CE and TUV certification

GAIGB-5ZA5 Gallon Automatic Bead Booster• Automatic valve releases air 20% faster than

manual valves, therefore requiring less pressure and making it safer to use• Push-button trigger allows user to keep both hands

on the tank, therefore maintaining control during use

GAIBB9LBead Bazooka 9 Liter• Automatic Rapid Air Release System (RAR) makes it

the most powerful inflation product in the market• Light weight (15 lbs.) reduces stress on technician• Push button trigger allows technician to keep both

hands on the tank for more control, making it safer than manual release tanks

• “Slotted” Double Barrel directs the air for best overall lift

• Fully ASME, CE, TUV & CRN certified• Patent-pending design, patent-pending

Automatic Rapid Air Release System and registered trademark

TSICH-5 Tire Bead Seating Tool• 5 gallon capacity ASME certified tank• High visibility powder coat finish• Pre-set safety release valve (160 psi)• 90 degree on/off ball style discharge valve• Large easy read air gauge

ESC10200Bead Breaker Kit• Works on one, two three piece rims• Consists of 10101 Bead Breaker Head, 10500

3-1/2 Qt.Hydraulic Pump, and 10604 Hose assembly• Works with regular compressor at 90-120 psi.• Uses 10,000 PSI hydraulic fluid force• Uses Hi Flow CouplersWill break beads in seconds using 10,000 lbs of force. Unit will not work on 5 piece rims.

EZREZLINE Wheel Laser Alignment Tool• All measurements can be taken in under 10 minutes• E-Z precise axle and wheel alignment• For heavy trucks, all types of trailers• Compact design, easy transport and toolbox storage• Multipurpose measurement capabilitiesThe EZ Line makes obtaining alignment readings on most trailer types very simple and fast, from RVs to commercial trailers. A straight steel bar and bungee cord are all you need in addition to the EZ line, to set the toe on any vehicle, including trucks, that have an “in” or “Out” toe setting. Includes: 4 magnetic self-centering lasers, measuring tape, 2 magnetic 5th wheel pin adapters and a durable storage/travel case.

EZREZLINEB1SWComplete Alignment Tool Package With Software• Includes everything shown above, plus software, hub and bar adapters

$342.99 $345.99

$369.00

$1,289.00

$254.69

$699.25

$2,579.00

45

Freight Terms • Freight delivery shipments must be inspected for damage and loss. • Inspect for obvious damage and concealed damage.• Confirm carton/pallet count. • Refuse shipment or notate damage/loss on delivery document.• Accepting and signing for a damaged or a short shipment releases the carrier and distributor from any claim responsibility.• Additional services provided by the carrier such as, lift-gate, residential delivery or special handling will incur additional freight charges.

ALC Keysco (ALC) ....................... 1, 26American Forge & Foundry (INT) .... 13, ................................................. 14, 38American Imc (IMC) ........................ 32Ammco (AMM) ................... 20, 21, 22, ..................................... 23, 24, 25, 48Astro Pneumatic Tool (AST) ....... 11, 36Atlas Automotive Equipment (ATE) ...................................... 1, 3, 4, 5, 6, 7, 9, ......................... 20, 21, 22, 23, 25, 48Bend-Pak (BEN) .................... 4, 21, 42Blackhawk / Shinn Fu Company (BHK) ....................................................... 13Bosch (BOS) ........................ 19, 22, 24Branick Industries, Inc. (BRA) .... 16, 19Champion Fulfillment (CMF) ...... 18, 31Chicago Pneumatic (CPT) ................ 43CPS Products, Inc. (CPS) ................. 29Crushproof Tubing (CRU) ................. 29

Esco Equipment (ESC) ......... 11, 15, 44E-Z Red Company (EZR) .................. 44Gaither Tool (GAI) ............................ 44Goodall Mfg. (GDL) .......................... 30Ingersoll Rand (IRT) ............... 2, 33, 43Innovative Products Of America (IPA) ................................................... 34, 41John Dow Industries (DOW) 27, 40, 42K Tool International (KTI) .......... 11, 12, ........................................... 14, 36, 48Lincoln Lubrication / Industrial (LIN) ......................................... 40, 41, 46, 47Mastercool, Inc (MSC) ..................... 29Midtronics Inc. (MID) ....................... 34Milwaukee (MLW) ........................... 18Motorvac (MTT) .............................. 40Mountain (MTN) .................... 8, 39, 41Mueller-Kueps (MLK) ...................... 37Nexiq Technologies (MPS) ............... 34

Noregon Systems (NRS) .................. 35Omega (OME) ..... 1, 10, 12, 13, 17, 36OTC (OTC) .................... 10, 11, 12, 13, .............................. 14, 15, 16, 17, 27, ......................... 34, 36, 37, 38, 40, 42Polarcool (PLC) ............................... 28Port-A-Cool (POR) ........................... 28Redline Detection (RDL) .................. 34Robinair (ROB) .......................... 29, 48Solar / Clore Automotive (SOL) .. 30, 31Sunex International (SUN) ............... 37Symtech Corporation (SYM) ............ 43Tire Service Equipment (TSI) ........... 44Titan (TIT) ....................................... 39Uni-Ram Corp (UNR) ....................... 42Wilton-Jet (JET) ........................ 18, 39

2 Post Lifts .................................... 5-84 Post Lifts .................................... 3-4AC / Ventilation ................................29Accessories .....................................25Air Compressors ........................ 32-33Air Lifts ......................................10, 17Air Over Jacks .................................11Air/Hydraulic Service Jacks ..............11Axle Jacks .......................................13Back Buddy II ...................................16Battery / Portable Power ..................31Bead Breakers .................................44Bead Seating Tools ..........................44Blasting Cabinets .............................26Brake Lathes .............................24, 25Caster Kits .........................................4Chargers ..........................................31Clutch and Flywheel Handlers ..........16Compressors ...................................16Cooling Fans ....................................28DEF .................................................27Diagnostics ................................ 34-35Diesel Emmission Fluid ....................27Dollies ....................................... 15-17Drill Presses ....................................39End Lifts ..........................................10Engine Stands ..................................17Evaporative Cooling ........................29

Fans ................................................28Floor Cranes ....................................15Floor Jacks ......................................12Fluid Handling ..................................40Fuel Transfer System .......................41Generators .......................................30Grease Pumps .................................41Headlamp Alignment........................43Hoists ..............................................18Hose Reels ......................................41Hydraulic Axle Jacks ........................13Hydraulic Floor Cranes .....................15Hydraulic Service Jacks ...................12Impact Wrenches .............................43Jacks ......................................... 12-13Jump Starters ..................................30Leak Detectors ................................34Lifting ........................................ 10-18Motorcycle Lifting ..............................9Oil Drains .........................................40Oil Filter Crushers ............................42Plasma Cutting ................................39Portable Power / Battery ..................31Power Winches ................................18Presses............................................39Pumps .............................................41Quick-release Nuts ..........................23Ramps .............................................17

Rams ...............................................10Scan Tools ................................. 34-35Scissor Lifts .......................................9Service Jacks ............................ 11-12Shop Cooling ...................................28Shop Equipment ........................ 36-43Shop Presses ............................. 36-38Sliding Jacks .....................................4Stands ....................................... 15-16Starters ..................................... 30-31Starting /Charging............................30Swing-arm Tire Changers ................21Tire Accessories ..............................24Tire Changers ............................ 19-21Tire Spreaders .................................19Tire Tools.........................................44Trailor Testers .................................34Transfer Tankers .............................40Transmission Jacks .........................14Truck Drains ....................................40Truck Ramps ...................................17Under Axle Jacks .............................13Ventilation Tools ..............................29Welding ...........................................39Wheel Balancers ........................ 22-23Winches...........................................18

MANUFACTURER INDEX

DESCRIPTIVE INDEX

INDEX

LIN1550

An SKF Group Brand

• 15 gallon per minute (57 liter per minute)

• Insulated, weatherproof design

• Stainless steel 90-degree hose adapter

• For use with diesel, kerosene and mineral spirits

• 360-degree, locking bung for proper positioning

• Three-piece telescoping pick-up tube for varying tank depths

• Pre-wired, heavy-gauge, 18 ft. (5,5 m) cable for operator convenience

• 13 ft. (4 m), commer-cial-grade, kink-resistant, anti-static hose

• Long-life, low-friction polymer vanes provide extended service intervals

Model 1550 fuel transfer pump

Model 1550

$000.00

LIN3665LIN3669LIN3669LIN1884

An SKF Group Brand

Lincoln’s new 20 V Lithium Ion PowerLuber From the lubrication equipment experts• Stable 3-point stance keeps

the tool upright and withinreach

• Electronically controlledtwo-speed design

• Dependable and easy to use

• Comfortable over-moldedgrip

• Balanced and lightweight• Multi-function LCD identifies

grease output and loss ofprime

• Lithium technology- Powerful- Efficient- Long-lasting

• Built-in LED illuminatesdimly lit areas

Model 1882 Single battery unit with charger and carrying case

Model 1884 Dual battery unit with charger and carrying case

An SKF Group Brand

Models 3665, 3667 and 3669 low-profile truck drains• 17 gal. (65 liter) capacity

with large 20 x 29 in.(508 x 737 mm) fluidcollection area

• 7 3/4 in. (195 mm) overallheight

• 6 ft. (1,8 m) long dischargehose

• Long, pivoting t-handle aidspositioning

• 3/4 in. camlock style connec-tor with leak proof cap

• Removable metal screen• Molded high-impact

polypropylene construction

• Recessed pockets forfilter and plug storage

• Four 4 in. (101,6 mm)diameter swivel casters

• Three discharge methods– Connect to a diaphragm

pump or other fluidtransfer system

– Manually-operatedrotary hand pump

– 120 V electric pumpModel 3665 Model 3667 with rotary hand pump

Model 3669 with 120 V electric pump

48

PRES

ORTE

DST

ANDA

RDU.

S. P

OSTA

GEPAID

PERM

IT #

75LA

KELA

ND, F

L

P.O

Box

9000

9La

kela

nd, F

l 338

04

This advertisement was prepared in advance, therefore merchandise availability is subject to delivery by manufacturers as scheduled. All advertised items are not stocked by all stores. Not responsible for typographical or pictorial errors. Quantities limited. CAUTION: Always wear appropriate safety equipment and observe safety advice

and proper use of equipment as instructed in warning and caution labels and operational instructions.

EQUIPMENTOCTOBER - DECEMBER 2015

KTI6319850 Ton Air Hydraulic Truck Jack • 50 ton capacity truck jack with lift

range from 11.4” to 21.25”• See page 11

ATEATWB11Computer Wheel Balancer• Rim sizes: 10”-32”• Max. wheel weight: 150 lb.• 110 V/1-phase• See page 23

ROB34788NiA/C RRR and Evacuate Unit• See page 29

PMS-185 and black

PMS-185 and black

AMMAPX90A APX90A Rim Clamp Tire Changer with Air Drive• See page 20

IN STOCKFREIGHT

PRE-PAID

The NEWROB34788NI

is Here!

$16,729.00

$1,265.00

$4,829.00

$799.50

Documents

Q4 2015 Equipment Flyer