Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Q10: 10,000lb Capacity Certified 2-Post LiftCertified 2-Post Lift
model#: Q10 Asymmetric/Symmetric Lift 10,000 lb. lifting capacity
model#: Q10Asymmetric/Symmetric Lift10,000 lb. lifting capacity
Symmetric Application
model#: Q10 Asymmetric/Symmetric Lift 10,000 lb. lifting capacity. (Symmetric application shown above)
model#: Q10 Asymmetric/Symmetric Lift 10,000 lb. lifting capacity (Asym-metric Application shown above)
Asymmetric Applicationmodel#: Q10 with Q2P10EH2 Q10 shown with optional 2’ Extension Kit(kit includes column extensions, hoses and cables).
Q10 05-14.indd 1 4/29/2014 4:36:09 PM
Optional Accessories
Q10: 10K 2-Post
Double telescoping screw pads and optional Stack Adapters
Standard 3-stage front arms enable both asymmetric and symmetric lifting capabilities
Specifications Model: Q10
Lifting Capacity 10,000 lb. (4535 kg)
Rise Height* 77 1/2”
(1968 mm)
Adj. Height Overall 12’ 3 1/2” or 11’ 5 1/2” (3747 mm or 3493 mm)
Width Overall 131 3/4” (3347 mm)
Drive-Thru Clearance 98 3/8” (2499 mm)
Floor to Overhead Switch
11’ 8 1/2” or 10’ 10 1/2” (3568 mm or 3314 mm)
Front Arm Reach Min. 21 3/4” or Max. 39 1/4” (Min 553 mm or Max 998 mm)
Rear Arm Reach Min. 38 1/4” or Max. 55 3/8” (Min 971 mm or Max 1407 mm)
Screw Pad Height Min. 43/8” or Max. 6 1/2” (Min 112 mm or Max 167 mm)
Inside of Columns 9’ 2 1/4” (2800 mm)
Ceiling Height Required 12’ 5” (3785 mm)
Motor 2 HP
Voltage Single Phase 208v-230v
Max. Load Per Arm 2,500 lb. (1134 kg)
* Rise height is measured with screw pads in highest position.
10315: (4) 3” Stack Extensions, (2) 6” Stack Extensions and (2) Organizer Racks with hardware
10313: (2) 6” Stack Adapters Extensions
10314: (2) U-Shaped Frame Truck Adapters
10318: (4) U-Shaped Frame Truck Adapters
Q2P10EH2: 2’ Height Extension. Kit includes column extensions, cables and hoses.
B10264: Air/electric workstation with filter/lubricator/regulator
3PH208: 2-Post Lift Power Unit Upgrade to 3-Phase - 208v
3PH230: 2-Post Lift Power Unit Upgrade to 3-Phase - 230v
3PH460: 2-Post Lift Power Unit Upgrade to 3-Phase - 460v
* Frame engaging adapters are REQUIRED when lifting trucks or other frame vehicles.
Single piece overhead for ease of installation.
Padded overhead bar for improved vehicle protection.
Faster rise for improved productivity.
Thicker cables and steel pulleys for longer life.
Taller carriage for reduced slider wear.
71” cylinder stroke for excellent rise.
Adjustable height
Lit#Q2P10_05/14 ©2014, Quality LiftsQuality Lifts reserves the right to make changes to specifications without notice and without making changes retroactive. Unloading, installation and oil not included.
Phone Toll-Free: 877-771-5438 www.qualitylifts.com
QUALITY LIFTS 200 Cabel Street Louisville, Kentucky 40206
For more information, contact your Authorized Quality Lifts Distributor:
Single piece overhead for ease of installation.
Padded overhead bar for improved vehicle
Q10 05-14.indd 2 4/29/2014 4:37:00 PM