Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
OB/SB-2Two Gang Weatherproof CoversDie Cast Metal. Gasket and mounting hardware included.
j-fmiim. ,-—— .« . • • • - • • • M 4 U" J——\Q:
a
WCB24 WVSG2 WVDG2 WVGG2 WVTG2
WVTT2
CatalogNumber
WCB24*
WVSG2*
WVDG2*
WVGG2*
WVTG2*
WVTT2*
WVTT215
Description
Blank Cover(Stamped Aluminum)
Self Closing Cover
Self Closing Cover
Self Closing Cover
Self Closing Cover
Toggle Switch Cover(Stamped Aluminum)
Toggle Switch Cover(Stamped Aluminum)with switches
WVTT215WVTT213WVTT220
Orientation
Universal
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
For use with devices
—
Single Recept + GFCI
Duplex Recept + GFCI
2 GFCI
Switch (10 A-20A) + GFCI
2 S witches (15A-20A)
2 Switches (15A, 1-Pole) incl.
WAD
Color
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Packaging
Shrink Wrapped
Shrink Wrapped
Shrink Wrapped
Shrink Wrapped
Shrink Wrapped
Shrink Wrapped
Shrink Wrapped
WtPer100 (Ibs)
13
50
50
50
50
46
89
CaseQty
24
18
18
18
18
24
18
WVTT213 Toggle Switch Cover(Stamped Aluminum)with switches
Vertical 2 Switches (15A, 3-way) incl. Grey Shrink Wrapped 89 18
WVTT220 Toggle Switch Cover(Stamped Aluminum)with switches
Vertical 2 Switches (20A, 1-Pole) incl. Grey Shrink Wrapped 89 18
WAD* Self Closing Cover Horizontal Duplex Recept Grey Shrink Wrapped 56 18
* Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time.
Effective October, 2001Copyright 2001 Printed in U.S.A.
PAGE 16Appleton
7770 N. Frontage RoadSkokie, Illinois 60077
OB/SB-2Weatherproof Boxes, Covers, Lampholders andLighting FixturesApplications:Use in branch circuit wiring for wet,damp, or dry locations• May be used as a junction box or adevice box for switches, receptacles,GFCI's, etc.• Lampholders are for use in exteriorand interior applications to providesafety and security for driveways, door-ways, and walkways.• Lighting Fixtures are for use in areaswhere moisture ingress is a concernsuch as construction sites, tunnels,bridges, subways.Features and Benefits:• Rugged continuous and seamless diecast construction prevents entry of dirt,dust and moisture.• Powder coating is applied for uniformcosmetic coating and weatherproofdurability.• Mounting can be achieved withmounting lugs (provided) or by usingthe integral mounting knockouts.• Smooth, accurately tapped hubs pre-vent wire abrasion.• Clear UL marking and volumetricmarking cast into each box and exten-sion ring facilitate electrical inspection.• Continuous box and cover compres-sion ensure complete sealing at gasketinterface to prevent moisture entry.• Lockable covers and covers with inte-gral devices are offered.• Closure plugs (2), mounting lugs (2)and green ground screw provided witheach box.• Mounting hardware and gasket pro-vided with each cover.• Locking swivel knuckle on lamphold-ers permits positive lamp positioningand accurate directional aiming.• Lampholders are supplied with allhardware including locknuts, porcelainsockets and internal gaskets for reliabil-ity and weather protection.• Photocells and lampholders are sup-plied with long leads (4" from the end ofthe knuckle) to facilitate wiring.• Lighting fixtures are factory assem-bled and fully gasketed to ensure fastand easy installation.
Most of the boxes, covers, andlampholders are individuallyshrink wrapped, labeled andbar coded for ease of handlingand identification.
Sturdy corrugated boxeswith easy lift off top
facilitate merchandising.
• Complete installation instructions areprovided with each item.• In-Use covers include: patentedinserts and comply with NEC® require-ments.• Most of the boxes, covers, and lamp-holders are individually shrinkwrapped, labeled and bar coded forease of handling and identification.• Lighting fixtures are individuallyboxed, labeled, and bar coded for easeof handling and identification.• Well-marked outer boxes combinedwith shrink wrapping facilitate merchan-dising.Materials:• Boxes, Extensions, Covers, Lamp-
holders, Lighting Fixtures, and Closureplugs: Zinc Die Cast.• In-Use covers: polycarbonate.• Lugs: Stamped Aluminum (One andtwo gang boxes), Integrally cast (roundboxes).• Cover screws: Plated Steel.• Gaskets: Closed cell foam (covers),Fiber (lampholders), Closed cell foamor Fiber (lighting fixtures).• Glass: Annealed glass.• Sockets: Porcelain (lampholders andlighting fixtures).Compliances:• UL and CUL Listed.
Effective October, 2001Copyright 2001 Printed in U.S.A.PAGE 2
Appleton7770 N. Frontage Road
Skokie, Illinois 60077
OB/SB-2Dimensions: Two Gang Covers
'32"
—— c
—— c
D O
5 O
49J ie"3sh"
|^113/16" ———
WCB24
-oU —— UL
Oo
wvs
J —— Uo
» 1 "/3211 *
32
O
221 /32"
49/
J
35
16"
V
L
1"/16 ——————— -
-ey= — ULoo
-e —
WVD
J —— Uo
» 1 1 1 / 3 2 " *
G2
0
49/
'8"
-oL
-o
J —— LJL
WVG
j Uo
-111/32"-
G2
O
t221/32"
49/_l
o [r — °
rr^X"^f"- ——— O
O
J L
» 111/32".
JU
O
t221/32"
49/
WVTG2
39/32"
23/6"
49/16"
Oo
oo
oo
oo
49/16"
WVTT2,WVTT215WVTT213,WVTT220
49/16"
D U
O
TJ
49/16"
WAD
Effective October, 2001Copyright 2001 Printed in U.S.A. Appleton
7770 N. Frontage RoadSkokie, Illinois 60077
PAGE 17