Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
[High Precision] Dovetail Slide, Rack & Pinion / XY Mounting PlatesLong
QFeature: Long stroke stages made of lightweight aluminum alloy. Select a size based on strokes needed. For stages with ±140mm stroke, see XLONG on P.1670.
QFeature: Plates to assemble Long Stroke Stages. Utilize in multi-axis configurations.
Part Number
XLWG100
Part Number
XYPLT1
QAdjustable Platesfor XY-Axis Stages
E Use Adjustable Plates for XY-Axis Stages (XYPLT) to combine the Long Stroke Stages together. W See below.
QX-Axis, Long
Dovetail Slide, Rack & PinionLong Stroke (300mm)
QFeature: Compatible with M size board (330mmx250mm). Suitable for sensor adjustments and tooling changes.
Part Number
XLONG300XLONG300-2SB
E Use Adjustable Plates for XY-Axis Stages (XYPLT) to combine the Long Stroke Stages together. W P.1669
QX-Axis, Long Stroke (300mm)
W Z-Axis P.1703
Con�gure Online
Con�gure Online
Con�gure Online
-16691 -16701-16691 -16701
QOther Information about StagesStage Selection Table P.1639, P.1640New Products P.1641About Standard Stages P.1642Overview, Technical Information P.1643, P.1644
QOther Information about StagesStage Selection Table P.1639, P.1640New Products P.1641About Standard Stages P.1642Overview, Technical Information P.1643, P.1644
65 45505560 45 55 6050302040 35 30 25 20 15 40352510 1510 55 0 65
105510
l 25
25x(N-1) (N: Number of Mounting Hole Rows)
15
25
30
L
6-M4, Depth 5
1525
Nx2-M3Ø2.5, Ø4.2 Counterbore, Depth 2.2
4-M2, Depth 5
42
17.125
6 14.8
Ø15
40.2 (24.5)(A)
(B)
Ø8
20
Clamp
XLWG
65 45505560 45 55 6050302040 35 30 25 20 15 40352510 1510 55 0 65
105510
l 25
25x(N-1) (N: Number of Mounting Hole Rows)
15
25
30
L
6-M4, Depth 51525
Nx2-M3Ø2.5, Ø4.2 Counterbore, Depth 2.2
4-M2, Depth 5
42
17.125
6 14.8
Ø15
40.2 (24.5)(A)
(B)Ø8
20
Clamp
EThe scale in the above figure is for L150, and not for L50, L70, L100 or L200.E By turning the preload adjustment screw (A) clockwise with a flathead screw driver, the stage
slide slowly, and by turning counterclockwise the stage slides quickly and smoothly.
65 45505560 45 55 6050302040 35 30 25 20 15 40352510 1510 55 0 65
105510
l 25
25x(N-1) (N: Number of Mounting Hole Rows)
15
25
30
L
6-M4, Depth 51525
Nx2-M3Ø2.5, Ø4.2 Counterbore, Depth 2.2
4-M2, Depth 5
42
17.125
6 14.8
Ø15
40.2 (24.5)(A)
(B)Ø8
20
Clamp
2.2
6
Ø4.2
M3
1Mount from Top
2Mount from Bottom
(A )Mounting Hole Enlarged View
1Mount from Top Use M2 screws.2Mount from Bottom Use M3 screws.
<2 Block Type>
M Material: Aluminum Alloy
S Surface Treatment: Black Anodize
EStandard Stages Similar Products (available for limited sizes only): XDTLS (P.1653)
EResolution (Vernier Scale Indication): 0.1mm/division EFor orders larger than indicated quantity, please request a quotation.EXLWG150-2 and 200-2 have two blocks. Please note that the stroke distances will be shorter than the one block versions.EKnob Cover HDCVR15 (Sold Separately): Ø15 knobs can be increased in diameter by installing the cover. W P.1666EAdjustable Plate XPLT40: Use this plate when connecting stages with non-matching mounting holes. W P.1664
Part NumberL Number
of BlocksTravel
Distance (mm)Travel per Knob Rotation (mm)
N: Number of Hole Rows
Number of Mounting Holes (Nx2)
L (mm)
Load Capacity (N) Travel Accuracy (µm) Weight (kg)
Unit PriceType No. Horizontal Vertical Straightness Parallelism 1~9 pc(s).
XLWG
50 50 1 ±15
18
2 4 12.5
29.4 14.7
30 300.10
70 70 1 ±25 3 6 10.0 0.12 100 100 1 ±40 4 8
12.5
0.14 150
1501
±65 6 12 40 400.17
150-2 2 0.24 200
2001
±90 8 16 50 500.21
200-2 2 0.28
0.43.2
0.4
0.4
0.40.4
0.40.4
42
2030
25326 ±
0.04
4-C24-M2
2-Ø4.5 ThroughØ8 Counterbore, Depth 4.4
6±0.
04
8 ±0.
05
50
20
4-M2
4-C2
2540
4-Ø4.5 ThroughØ8 Counterbore, Depth 4.4
3H7,
Dept
h 3
40
Ø3H7, Depth 3
20±0
.05
4
58
2550
40 32
4-M3
50
4-Ø4.5 ThroughØ8 Counterbore, Depth 4.4
4-C229±0.05
25±
0.05
4
Ø3H7, Depth 3
2-Ø3H7
40±0.02
3H7, Depth 3
XYPLT1 XYPLT2 XYPLT3(Bottom View) (Bottom View)
M Material: Aluminum Alloy
S Surface Treatment: Black Anodize
EFor orders larger than indicated quantity, please request a quotation.
Part Number Applicable Stage Combination Unit Price Volume Discount RateType No. Stage (Top) Stage (Bottom) 1~2 pc(s). 3~9 pcs.
XYPLT1 XLWG, ZLWG (P.1669, 1703) XLWG 2 XLONG (P.1670) XLWG 3 XLONG (P.1670) XLONG(P.1670)
Stages with different L lengths can be combined.
(=300)
40
3025
4-M2, Depth 5
14-M4, Depth 512-M4
15 25
2-Ø3H7 Depth 4
40±0.02*
20±
0.05
*
50
22.240 8
20.8
Ø3H7, Depth 4 Ø3H7, Depth 4
3H7,
Dept
h 4
3 H7,
Dept
h 4
4
40
32
25
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290
50 50 50 50 50
Scale Label*
Index Label
(25)
4
4020
±0.
05
Ø25
54 (31)
(A)
Ø3.4, Ø8 Counterbore, Depth 4.4
Application Example
15
L
* Tolerance applies to Ø3H7 Pitch
(=300)
40
3025
4-M2, Depth 5
14-M4, Depth 512-M4
15 25
2-Ø3H7 Depth 4
40±0.02*
20±
0.05
*
50
22.240 8
20.8
Ø3H7, Depth 4 Ø3H7, Depth 4
3H7,
Dept
h 4
3 H7,
Dept
h 4
4
40
32
25
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290
50 50 50 50 50
Scale Label*
Index Label
(25)
4
4020
±0.
05
Ø25
54 (31)
(A)
Ø3.4, Ø8 Counterbore, Depth 4.4
Application Example
15
L
* Tolerance applies to Ø3H7 Pitch
(=300)
40
3025
4-M2, Depth 5
14-M4, Depth 512-M4
15 25
2-Ø3H7 Depth 4
40±0.02*
20±
0.05
*
50
22.240 8
20.8
Ø3H7, Depth 4 Ø3H7, Depth 4
3H7,
Dept
h 4
3 H7,
Dept
h 4
4
40
32
25
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290
50 50 50 50 50
Scale Label*
Index Label
(25)
4
4020
±0.
05
Ø25
54 (31)
(A)
Ø3.4, Ø8 Counterbore, Depth 4.4
Application Example
15
L
* Tolerance applies to Ø3H7 Pitch
(=300)
40
3025
4-M2, Depth 5
14-M4, Depth 512-M4
15 25
2-Ø3H7 Depth 4
40±0.02*
20±
0.05
*
50
22.240 8
20.8
Ø3H7, Depth 4 Ø3H7, Depth 4
3H7,
Dept
h 4
3 H7,
Dept
h 4
4
40
32
25
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290
50 50 50 50 50
Scale Label*
Index Label
(25)
4
4020
±0.
05
Ø25
54 (31)
(A)
Ø3.4, Ø8 Counterbore, Depth 4.4
Application Example
15
L
* Tolerance applies to Ø3H7 Pitch
XLONG
Application Example
* Adhesive vernier scale label included can be placed at desired position in accordance with a required adjustment range.
QStandard Knob
QCoarse / Fine Knob
(=300)
40
3025
4-M2, Depth 5
14-M4, Depth 512-M4
15 25
2-Ø3H7 Depth 4
40±0.02*
20±
0.05
*
50
22.240 8
20.8
Ø3H7, Depth 4 Ø3H7, Depth 4
3H7,
Dept
h 4
3 H7,
Dept
h 4
4
40
32
25
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290
50 50 50 50 50
Scale Label*
Index Label
(25)
4
4020
±0.
05
Ø25
54 (31)
(A)
Ø3.4, Ø8 Counterbore, Depth 4.4
Application Example
15
L
* Tolerance applies to Ø3H7 Pitch
70 (31)
(A)
Ø30
Ø20
E Use M3 screws for mounting from top, M4 screws for mounting from bottom.
E By turning the preload adjustment screw (A) clockwise with a flathead screw driver, the stage slide slowly, and by turning counterclockwise the stage slides quickly and smoothly.
E Dowel holes on top and bottom plates can be used to secure locating repeatability.
X Do not remove blocks from bottom plate, as blocks are preloaded and ground fit for precision, and shipped after inspection.
M Material: Aluminum Alloy
S Surface Treatment: Black Anodize
A Accessories: Scaled Label (PET) Index Label (PET)
EResolution: 1mm/division EFor orders larger than indicated quantity, please request a quotation.
Part Number Block Travel Distance (mm)
Travel per Knob Rotation (mm) Load Capacity (N) Travel Accuracy Weight (kg)
Unit PriceType L-No. Knob Qty. Coarse Fine Horizontal Vertical Straightness 1~9 pc(s).
XLONG
300Standard
Knob
1±140 18 -
49 24.5
150µm0.63
300-2 2 0.81 300-3 3 0.99 300-SB Coarse/Fine
FeedsKnob
1±140 18 2.3 150µm
0.70 300-2SB 2 0.95 300-3SB 3 1.20
E XLONG300 Standard Knob Type has an M3 set screw for the knob.
QAssembly of Standard Knob
(Length 10.5)
(Length 6.5)
Ø7 Stationary Cover
M3 Thread
Ø4 Shaft Dia. Part
M3 Hex Socket Set Screw(2 Places)
For Pricing and Days to Ship,Please Con�gure Online.