Project Workplace

1. Download the HTC Vive .zip file from Project Workplace Downloads. 2. Once downloaded, unzip the file to reveal the Unity application titled ‘EnterpriseConnect’. 3. Once prompted with the configuration window, press ‘Play!’ to start the video presentation.

Getting started with Project Workplace in VR:

• To go back to the first room after the end of the presentation, hit enter (↵) again.• You can start the presentation in the first room by looking at the touch panel for 3 seconds.• To move in between rooms, look at the photos available on the table for 3 seconds, which will

activate a timer then take you to the next room.• For admins: It is possible to customise the photo on the wall in each room. In the first room,

press Escape, then enter the url of any image on the internet. Restart the app in order to load the change. Note: the photos must be available without any login.

Once you’re inside the application:

• The audio is designed to be in tune with the space, so ensure that the headphones are on the appropriate sides.

• Room-size VR is recommended, but standing only is possible as well.• No need for the HTC Vive controllers• For best performance, the headset should be placed on in the middle of the defined room

space for the VR kit.

A few extra VR set-up tips:

Questions about the set up? Contact us at project-workplace@cisco.com

PWP in VR