Upload
mihai-constantinescu
View
212
Download
0
Embed Size (px)
Citation preview
8/20/2019 PVA-CSK.docx
http://slidepdf.com/reader/full/pva-cskdocx 1/4
BOSCH PAVIRO - PVA-CSK Call Station KIT
Architects’ and Engineers’ Specifications
The call station KIT shall be the PCB version of the desktop Call station. It shall bedesigned to enable the creation of a custom call station. The Call station KIT shall
include a PCB with Eurosyle connectors and a raphical display. It shall be possibleto connect a dynamic or electret microphone to the Call station KIT. !ddress andcanbus settings shall be done by "IP switches on the board. The user shall be able to
freely decide what to connect# illuminated $C%display and&or a loudspeaker'
$eds&Bulbs and or buttons.The operation status shall be permanently supervised by the system controller. The
call station KIT shall provide () free programmable user functions via the $E"&Bulbconnectors. The user shall be able to connect $E"s or *+, industrial bulbs to the
$E"&Bulb connectors. -sing Bulbs shall reuire an additional *+, power supply# itshall be possible to connect and additional power supply via eurostyle connectors on
the PCB.It shall be possible to add a ma/imum of two additional supervised emergency
buttons to the Call station KIT. 0ptionally1 it shall be possible to add a key switch to
lock or enable call station KIT functions with a key switch.
The call station KIT shall have the following features#
• 2ive menu&function keys 3pre%programmed4 5 five buttons shall provide each
( $E"&Bulb.
• () function and speed dial buttons 3customi6able41 each two $E"&Bulb
connections per button function shall be available.
• Button functions shall be programmable as#
o 7one select1 source select1 level control1 emergency on&off1 message
on&off1 failure acknowledge&reset.
o switching output trigger on&off or 8 to (8,1 select scheduled events1
scheduled event on&off.• 9ultilanguage $C" display shall inform users about system status1 system
faults1 selected 6ones1 source select1 clock1 different kind of additional
3failure4 messages shall be free configurable.
• :upervised microphone1 with limiter and a speech filter for e/cellent speech
intelligibility.
• C!T) cable for data and audio connection to controller 3can bus1 up to (888
meter4.
• It shall be possible to daisy chain + call station KITs.
• It shall receive audio and operational control signals from the controller1 and
shall report its status to the system controller.
8/20/2019 PVA-CSK.docx
http://slidepdf.com/reader/full/pva-cskdocx 2/4
The call station KIT shall have the following specifications#
Buttons 3through screw%terminal connectors4
) pre%programmed.
() programmable 6one&function buttons.
; supervised programmable optional emergency buttons. * connections for each button' *; buttons share < common
,CCs 3;,; % "C4. Each button shall have short%circuitprotection.
$E"s connected to buttons 3through screw terminal connectors4
Call station KIT shall support open drain outputs with ma/. )
m! per output. -sing the internal supply1 a ma/imum of (88 m! shall be
sourced for all outputs.
The Call station KIT shall also provide an e/ternal power supply
connection for lighting $E"s of e/ternal normal buttons.
* connections 3,CC = open collector4 shall be available for each$E" connected to a button.
In total1 ;> $E"s shall share (8 common 9I?@PA@$E". These
$E"s shall be supplied with ) , "C using the internal power
supply. The connected $E"s shall be supplied with *+ , "C using the
e/ternal power supply. Each $E" circuit shall have short%circuit protection.
Power $E" 3through screw%terminal connectors4
:hall be driven by 9I?@PA@$E" 3) , "C or *+ , "C4.
* connections 3,CC = open collector4.
2ault $E" 3through screw%terminal connectors4
:hall be driven by 9I?@PA@$E" 3) , "C or *+ , "C4.
* connections 3,CC = open collector4.
!larm $E" 3through screw%terminal connectors4
:hall be driven by 9I?@PA@$E" 3) , "C or *+ , "C4.
* connections 3,CC = open collector4.
$C" display kit shall be included
! flat ribbon cable shall connect the display to the call station
kit mainboard.
The ribbon cable length shall be &% ;88 mm.
0thers 3through screw%terminal connectors4 ( audio source 3line in4.
( supervised microphone input 3"BB D8>(&884 capsule and PTT
button connection 3input = ,CC4 with short%circuit protection.
( loudspeaker connection.
( additional *+ , "C power supply.
8/20/2019 PVA-CSK.docx
http://slidepdf.com/reader/full/pva-cskdocx 3/4
E/ternal connectors ( call station bus connector 3control data audio power
supply1 %+)4 ( E?T connector 3%(*1 e.g. for call station e/tension4
9ain power supply
Fominal voltage *+ , "C 3%(8G&;8G4
9a/imum voltage range ()5)> , "C
Fominal current consumption for main power supply H (88 m!
9a/imum supply current
E/ternal power supply for lighting1 without e/tensions
H >8 m!&*+ ,H ((8 m!&(> ,
Internal power supply for lighting1 without e/tensions
H ()8 m!&*+ ,H *88 m!&(> ,
C!F interface
(81 *81 or <*.) kbit&s
9a/imum mic input level%*( dBu
9a/imum line input level+ dBu
F2 output Balanced
Fominal level < dBu 9a/imum level (* dBu
2reuency response
*885(<1888 61 8&%; dB
:ignal%to%noise ratio 39ic and $ine input1 F2 output4
J <8 dB
Buttons Fominal voltage ;.; , "C
9a/ current (88 m!
PTT input switch
Fominal voltage ;.; , "C
9a/ current (88 m!
8/20/2019 PVA-CSK.docx
http://slidepdf.com/reader/full/pva-cskdocx 4/4
$E"s Fominal drive current ) m! for each $E"
9a/imum drive current *8 m! for each $E"
Fominal drive voltage ) , by internal power supply for )%,
point lighting$E"s
*+ , by e/ternal power supply for *+%, ring lighting
$E"s
!dditional power supply for industrial buttons backlight Fominal voltage *+ , "C 3%(8&;8G4
Fominal current consumption H ;88 m!
9a/imum supply current H )88 m! at *+ ,
E/ternal speaker
Fominal resistance > 0
Power rating (.) A
9a/imum power * A Fominal operating voltage ;.) ,
Formal microphone 3$BB D8>(&88 reference4
:ensitivity ;.( m,&Pa L+ dB
2reuency response *>85(+888 6