PV - CHANTIER - Technical Rider v2

P I A N O V E R T I C A L | " C H A N T I E R " T E C H N I C A L R I D E R

PIANO VERTICAL | technical rider CHANTIER v 2.0 | v. 15 décembre 2019

TABLE OF CONTENTS

1. general information 3

2. contacts and information 3

3. team on tour (7x) 3

4. public area 4

5. technical areas 4

6. site inspection and sound recording 4

7. weather conditions 5

8. transport 5

9. the piano 6

10. hooks the piano vertically to the crane 6

11. sound 7

12. light 10

13. radiocommunication 11

14. dressing room 11

15. public reception and headphones management 11

16. Insurances and surveillance 12

17. requested crew 12

18. standard schedule 13

19. summary of the items to be provided 14

PIANO VERTICAL | technical direction | [email protected] +41 76 524 29 30 - Page / 2 14

Boll & Roche Cie Ruelle Carbaccio 5a 1950 Sion - Suisse +41 79 250 73 62 [email protected] www.pianovertical.com

mailto:[email protected]

http://www.pianovertical.com




1. GENERAL INFORMATION

1.1. Show An upright grand piano recital, flying from the air suspended under a moving crane.

1.2. Music A musical work for piano and construction sounds. One piece (without interruption) composed by pianist Alain Roche.Une oeuvre musicale pour piano et sons de construction.

1.3. Duration 45 minutes.

1.4. Environment Outdoor.

1.5. Decor A building construction site in the envelope raising phase with a tower crane B Other sites can be considered (quarry, shipyard, port, industry, etc ...). Thank you for contacting us.

1.6. Space-time At dusk in the morning (at dawn), precisely a few minutes before the start of the blue hour.

1.7. Sound diffusion All sound universes (live piano, recorded sounds and live sound) are broadcast in professional headsets "closed listening". 200 headphones are provided by PIANO VERTICAL.

2. CONTACTS AND INFORMATION

2.1. Technical direction Stéphane Gattoni • [email protected] • +41 76 524 29 30

2.2. Piano Tuning and transport Piano Works • Matthias Maurer • [email protected] • +41 78 609 99 65

2.3. Artistic direction and choreographer Stéphanie Boll • [email protected] • +41 79 909 85 52

2.4. Booking and management PIANO VERTICAL | Greg Zavialoff [email protected] • +41 79 829 79 70

2.5. Production manager PIANO VERTICAL | Christine [email protected] • +41 76 616 92 21

2.6. Production and administration PIANO VERTICAL | Boll & Roche Cie • Ruelle Carbaccio 5a • 1950 Sion • Suisse www.pianovertical.com • +41 79 250 73 62

3. TEAM ON TOUR (7x)

3.1. Artistic (2x) 1 pianist, 1 artistic direction (and operator direction crane or engines)

3.2. Technic (4x) 1 sound engineer, 1 lightning engineer, 1 technical director, 1 tuner and piano service

3.3. Production (1x) 1 manager


B








4. PUBLIC AREA

4.1. Number of spectators The number of spectators is set at 200 people maximum, corresponding to the number of headsets that we can provide.

4.2. Seating places A space to install a maximum of 200 seats, ideally on deckchairs for an easy view of the sky. C These places can be grouped or spread over different places or floors depending on the progress of the work.

4.3. Access and secure area. The space of the spectators as well as its access will have to be secured while keeping as much as possible its rough aspect (dusty, unfinished, tools, etc ...)

5. TECHNICAL AREAS

5.1. PIANO area We need a space for the preparation of the piano, its crane hook and the hold (during the night and before the performance) and this, in the area of span of the crane. Its access must be possible at all times and at the same level. Various options must be studied to find the most practical and aesthetic (if it is in public view). Here is one of the most common options D

TO BE PROVIDED BY THE ORGANIZER

PIANO area minimum dimensions 2.5m / height, 2.5m / wide, 3m / long (a container of 20 feet or a tent 5m / 5m are ideal) mouth 2m / 2m minimum (to enter the piano flat)

access if threshold, provide an access ramp (maximum 15 °) 160cm wide minimum

electricity 1x 10A 240V (required for battery charge)

5.2. CONTROL area A sheltered zone of the rain and the sun will have to be installed for the sound management and the lighting control during the activity (installations, repetitions, and representations) on the site, in the PUBLIC zone. It will include a large opening for a wide view of the site. This space will have to be under surveillance (theft and depredation) permanently since the arrival of the technical team of PIANO VERTICAL until its departure.

Shelter in operation minimum dimensions 3m long / 3m wide / 2m high

electricity 1x 10A 240V

6. SITE INSPECTION AND SOUND RECORDING

6.1. Site inspection A tracking on the site with the event organisers, the site manager, the technical manager and a representative of the main contractor is, with exception, obligatory. At least 2 representatives of PIANO VERTICAL will be present. This will allow us to resolve multiple issues, including

all security questions the course of piano flights the locations of the PUBLIC, PIANO and CONTROL zones the equipment sound, light and electricity access, etc .…


C

D


6.2. Recording sounds During this tracking, we will record the sounds of the building site in activity to integrate them into the musical composition. We will provide the necessary equipment for this sound recording. Thank you to provide an authorization of access for 2 people for 1 day on the whole site as well as the necessary kit of security (helmets, security vests, safety shoes)

TO BE PROVIDED BY THE ORGANISER

6.3. Advanced information To facilitate the identification, the organizer will provide prior to production all the necessary information on the eventual service such as:

plans (dwg, dxf, or pdf with measurements)

photos or construction simulation access to the site, GPS coordinates, …

7. WEATHER CONDITIONS

7.1. Precipitation With its lid closed, the grand piano has been specially fitted to be watertight. Therefore, the performance can take place even in case of reasonable rainfall, ... as the player is not fully waterproofed.

7.2. Wind Wind is a determining factor for this performance. in case of wind, the performance may be postponed. Decision will be taken according to the conditions on site.

7.3. Temperature Temperature has a direct influence on the pianist. Ideal performance temperature is between 10 degrees and 40 degrees. The ORGANISER shall contact PIANO VERTICAL for special climatic conditions.

7.4. Decision protocol The technical team of PIANO VERTICAL will study the weather forecast with help of the local meteorological services previously contacted by the ORGANISER. If necessary, the performance may be delayed, postponed, interrupted or cancelled. The final decision will be taken by PIANO VERTICAL.

8. TRANSPORT

PROVIDED BY PIANO VERTICAL

8.1. Piano and accessories transport The piano and its accessories will be transported by PIANO VERTICAL by road or by air (in line flight only for reasons of humidity in the hold) le piano ainsi que ses accessoires. These transport costs are fully included in the fee.

8.2. Douanes VERTICAL PIANO includes all customs taxes in the member countries of the Convention A.T.A. However, he could seek the help of the ORGANISER in case of complications in the customs procedures. For countries not members of the Convention A.T.A. the ORGANISER may be asked for additional fees.

8.3. Goods Piano Yamaha C3 + internal equipment 200cm / 180cm / 76cm - 611kg E Rigging accessories case 121cm / 58cm / 76cm - 142kg F Technical accessories case 121cm / 58cm / 76cm - 152kg G Piano accessories case 121cm / 58cm / 76cm - 132kg H Immersion headphones case 121cm / 58cm / 76cm - 92Kg I Immersion headphones + Amp case 121cm / 58cm / 76cm - 130kg J Total: 1’259 Kg / 4.34 m3


E

F

G

H

I

J

K

https://www.atacarnet.com/carnet-countries

https://www.atacarnet.com/carnet-countries



8.4. Temporary storage For reasons of customs delay, the piano and its accessories can be delivered (especially when transported by plane) before the arrival on site of the team of PIANO VERTICAL. The ORGANIZER will be asked to provide a storage space for the goods. The latter must be secured (locked) and with a stable humidity. Its access door must be at least 185cm and it will take a pallet truck with long forks K (160cm or 180cm) to move the box containing the piano!

9. THE PIANO


9.1. The Grand Piano The piano is provided by PIANO VERTICAL. it is a real YAMAHA C3 grand piano (186 cm), with a special and unique technical device, allowing the piano hammers to be played vertically. Therefore, there is no other way to use another piano! The performance is done without the cover of the piano (strings to sight) except in case of strong winds or risks of bad weather.

9.2. Hanging The piano is suspended by 2 points. A bar crosses the tail of the piano from side to side and 2 eyelets allow it to hang vertically.

9.3. Technical data

Piano (horizontally) length 186 cm

width 145 cm height (from the legs to the lid) 100 cm

weight (with lid) 330 kg

Chair description customized chair with central axis length of the piano with chair 236 cm

pianist safety to the chair hook-point to the chair with carabiner and harness

harness of the pianist alp95 M camp (or similar harness)

9.4. Accordage A complete piano tuning will be requested on site, (the day before the service or the day of the service), by our official tuner. This tuning will be done with the piano in a horizontal position, in a tempered room (the container for example), shielded from bad weather and noise pollution provided by the ORGANISER. Duration: around 2 hours.

10. HOOKS THE PIANO VERTICALLY TO THE CRANE

10.1. Security During the identification, we will evaluate, with the site management and the crane operator, the possible movements according to the characteristics of the site and the model of the crane..

10.2. Flight choreography The flights of the piano are elaborated upstream on all the authorized wingspan of the crane on 3 axes (up / down, advanced and retreated and rotation with 360 ° on the axis of the drum). They will be executed by the usual crane operator of the site, under the indications (live) of our director. These manipulations require a rehearsal the day before the performance.


https://www.dropbox.com/s/fb75tqde4ynadgm/Palett%20truck%20Long%20Fork.jpg?dl=0



operator 1x crane operator


10.3. Kit d’accroche motorized swivel 360° 3.25T on dmx engine L

slings for bridle 2x 1T C1 - 1m M rudder 5T, 110cm / 17kg N

swings between piano and rudder 2x 1T C1 - 3m O supplies 1 1 set of shackles 2.3T C1 and steelfex

Total weight: 504.50 kg (piano, accessories, pianist, rudder, etc ..)

10.4. Security validation All fasteners supplied by PIANO VERTICAL are validated by an engineering office.

11. SOUND

11.1. IMMERSION PROJECT - to know ... "Imaginary Sounds Of Wall" is a musical work for solo piano and pre-recorded and live recording live sounds. All of these sound universes are broadcast in professional audio headphones with "closed listening" (isolated from external sounds). We work with products connected by cable, offering superior quality to all wireless models (Bluetooth, etc …) We provide all the headsets (200 max) (see details below). The organiser will provide the mixer, cabling and HF transmitters and receivers.


11.2. FOH location in the flight visibility area of the PIANO VERTICAL(provide table, trestles or other space at working height)

power 1x 10A 240V

HF system location beside control desk space for external devices beside control desk (1x rack 3U)

protection of the control desk space of min. 3x2m, protected from rain and sun

11.3. Mixer digital console* 32x in (16x physical) 24x out (16x physical + 8x ADAT) V connectivity protocol DANTE®slot card 1x ADAT card min 8x out (Yamaha MY16-AT)

*Yamaha (QL 1, 5 / CL 1, 3, 5 or higher), Digico, Soundcraft, Digidesign, etc with DANTE card

11.4. Wireless system We install 6 out of 8 pocket transmitters (belpack) in a waterproof box (pelicase) X and we carry out the antennas Y on the outside of it. We are compatible only with SHURE systems below:

- Analog system option receiver 3x Shure UR4D+ receiver diversity 2 channels (link Rj45 installed) transmitter 5x Shure UR1 (or URM1) Pocket transmitter antenna 2x Shure UA874WB active directional antenna 7dBi 100° 470-900MHz

- Digital system option receiver 3x SHURE AXIENT digital AD4DE-A Z (link Rj45 installed) transmitter 5x Shure AD1 8 Pocket transmitter antenna 2x Shure UA874E active and passive directive antenna 9


L

M

N

O

V

X

Z

8

9

:

;

Y

https://www.audinate.com/solutions/dante-overview

https://www.shure.fr/produits/systemes-sans-fil/uhf-r_wireless/ur4dp

https://www.shure.fr/produits/systemes-sans-fil/uhf-r_wireless/ur1

https://www.shure.fr/produits/systemes-sans-fil/axient_digital/ad4d

https://www.shure.fr/produits/systemes-sans-fil/axient_digital/ad1


11.5. Monitoring HF For reasons of specific reception characteristics on the piano (moving in the air), we have to work with a double diversity monitoring system.

receiver 2x Shure P10R+ : Receiver diversity PSM1000 470-542MHz

transmitter 1x Shure P10TE-G10E ; transmitter 2 ch. PSM1000 470-542MHz

combiner antenna 1x Shure UA221 Passive Antenna Splitter/Combiner T

antenna 2x Shure PA805SWB Antenna directional 7dBi 100° PSM < antenna 3x Shure UA820-G10 Antenna omnidirectional =

11.6. HF Accessories batteries 24x AA/LR06 batteries new + 2x 9V batteries (for rehearsals and delivery)

microphone stand 4x K & M 210/9 Standard microphone stand (for antennas) + 2x high stand K&M 20811 + 21231 or equivalent

11.7. Cabling Wiring A precise plan of the public space (placement of the chairs), the FOH control room, as well as all the details of the wiring of the helmets will be realised by our care after our tracking. It will allow you to quantify all sound cables and electrical arrivals on the site. Here is an example of quantification of the wiring:

sound cables 300x XLR cables containing: 70x 3m / 90x 5m / 80x 10m / 50x 15m / 6x 20m / 4x50m

power cables 30x 240V cables containing: 15x 20m / 15x 10m

11.8. Staff sound set-up 1x technician his equipment manager

installation and cabling 4x sound hands for headphones cabling (4 hours)

rehearsals & performance 1x babysitter mixer + 1 sound-hands (to direct antennas to the pianist during flights!) before and after the show 4x people (without technical skills) to install and uninstall headphones


Sound Equipment microphones all piano microphones (DPA, PNO.1…)

processing a (3 U) Uad Twin, Akai, Macbook, ipad headphones 200x AKG K52 d

headphone volume 200x module PM1 e headphone preamplifiers 13x Fisher-Amp 16x out f

11.9. Patch son

INPUT Label Source Furniture Via

1 Piano 1 LOW #DPA 4009 j Belpack 1 - Receiver 1 Local 1

2 Piano 2 MID-LOW #DPA 4009 k Belpack 2 - Receiver 2 Local 2

3 Piano 3 MID-HI #DPA 4009 l Belpack 3 - Receiver 3 Local 3

4 Piano 4 HI #DPA 4009 m Belpack 4 - Receiver 4 Local 4

5 Piano / Basse #Pno.1® n Belpack 5 - Receiver 5 Local 5

6 Annonce #Shure B57 Local 6

7 Direct noise st 1 L Shoeps MK2s Stand Mic big up Local 7

8 Direct noise st 1 R Shoeps MK2s Stand Mic big up Local 8

9 Noise Real L Dante Qlab / VSC 1 VSC 1

10 Noise Real R Dante Qlab / VSC 2 VSC 2

11 Noise Ambiance L Dante Qlab / VSC 3 VSC 3

12 Noise Ambiance R Dante Qlab / VSC 4 VSC 4

13 Noise MS L Dante Qlab / VSC 5 VSC 5

14 Noise MS R Dante Qlab / VSC 6 VSC 6

15 Noise Stéréo L Dante Qlab / VSC 7 VSC 7


<

=

a

d

e

f

2x IN2x LINK 240V/110V

jk

lm

nX

https://www.shure.fr/produits/in_ear_monitoring/psm1000/p10rp

https://www.shure.fr/produits/in_ear_monitoring/psm1000/p10t

https://www.shure.fr/produits/accessoires/systemes-sans-fil-accessoires/ua221

https://www.shure.fr/produits/accessoires/in_ear_monitoring-accessoires/pa805

https://www.shure.com/en-US/products/accessories/ua8

https://produkte.k-m.de/en/product?info=461&x5318d=e77713c543493d24799a168de3f110ce

https://produkte.k-m.de/en/product?info=477&x5318d=44f0954eac54942e1c46d671cf715837

https://produkte.k-m.de/en/Mic-stands/Floor-stands/20811-Overhead-microphone-stand-black

https://produkte.k-m.de/en/Mic-stands/Floor-stands/20811-Overhead-microphone-stand-black


#= provided by PIANO VERTICAL

16 Noise Stéréo R Dante Qlab / VSC 8 VSC 8

17 Noise K5 Low L Dante Live / VSC 9 VSC 9

18 Noise K5 Low R Dante Live / VSC 10 VSC 10

19 Noise K5 Hi L Dante Live / VSC 11 VSC 11

20 Noise K5 Hi R Dante Live / VSC 12 VSC 12

21 Noise Factory L Dante Live / VSC 13 VSC 13

22 Noise Factory R Dante Live / VSC 14 VSC 14

23 Clic L Dante Live / VSC 15 VSC 15

24 Clic R Dante Live / VSC 16 VSC 16

25 UAD # 1 - L #UAD Twin Mon L Local 9

26 UAD # 1 - R #UAD Twin Mon L Local 10

27 UAD #2 - L #UAD Twin Line 3 Local 11

28 UAD #2 - R #UAD Twin Line 4 Local 12

29 UAD #3 - L #UAD Twin HP L Local 13

30 UAD #3 - R #UAD Twin HP R Local 14

31 Local 15

32 Talkback #Shure SM58s Local 16

Output Label to source Furniture Via

1 UAD # 1 - L Aux 1

#UAD Optical cable

Slot Adat 1

2 UAD # 1 - R Aux 2 Slot Adat 2

3 UAD #2 - L Aux 3 Slot Adat 3

4 UAD #2 - R Aux 4 Slot Adat 4

5 UAD #3 - L Aux 5 Slot Adat 5

6 UAD #3 - R Aux 6 Slot Adat 6

7 Slot Adat 7

8 Slot Adat 8

9 IEM Pianist L Aux 9PT10 1 / Transmitter 1

Omni 1

10 IEM Pianist R Aux 10 Omni 2

11 IEM StageDirector L Aux 11PT10 2 / Transmitter 2

Omni 3

12 IEM StageDirector R Aux 12 Omni 4

13 IEM Cuetop L Aux 13#PM1 with K52

Omni 5

14 IEM Cuetop R Aux 14 Omni 6

151617 Master L Headphones Master St L #Fisher-Amp serie 1 L Slot 1 out 1

18 Master R Headphones Master St R #Fisher-Amp serie 1 R Slot 1 out 2







mx 1 Amb SUM L Matrix 1 Dante out 1

mx 2 Amb SUM R Matrix 2 Dante out 2

mx 3 ST L to rec Matrix 3 Omni 7

mx 4 ST R to rec Matrix 4 Omni 8



12. LIGHT

12.1. To know Each site, each configuration involves a different staging and therefore a specific and unique light implantation. It is therefore impossible here to list the necessary equipment. We will strive to work mainly with the equipment that you can offer us, but here is a "generic" equipment that could be requested:


12.2. Equipment spot 24x SGM P10 (RGBW LED Flood Light, or equivalent), 12x Pars LED, RGBW, Small Angle, IP658x stroboscope 3000 W (Martin Atomic 3000 or equivalent), cabling dmx, power and multicore enough

console 1 desk control (Grand MA 2, or equivalent) dmx 1x splitter DMX 5 pts

effects 2x powerful DMX controllable fog machine (MDG or equivalent)

power 63A / 400V (to define) power for control 1x 10A 240V for PIANO VERTICAL kit

12.3. Light staff set-up 1x console operator, 3x technicians for installation and setup

rehearsals & performance 1x babysitter console


PIANO VERTICAL provides its own rigged lighting system (integrated into the piano). This is a wireless remote controlled installation.

spot 3x PAR 16 led 10W • led ceinture et clavier

power t Battery YUASA NPL38-12I - Batterie au plomb 12 V 38 Ah dimmers t 8x dimmers of battery specific

control 360° u 1ère solution® dmx

Wireless Dmx t Wireless solution 512 ch 2.4 Ghz merger and command v 1x merger 2x in 1x out + 1x control desk 360°

12.4. Internal light patch on the piano

Channel Label Source Transmission

401 #leds inside R (coarse)

#led strip RGB 7

#wifi dmx

402 #leds inside R (fine) #wifi dmx

403 #leds inside G (coarse) #wifi dmx


405 #leds inside B (coarse) #wifi dmx


407 #keyboard WW (coarse)

#led strip white warm white and cool white!

#wifi dmx

408 #keyboard WW (fine) #wifi dmx

409 #keyboard WC (coarse) #wifi dmx

410 #keyboard WC (fine) #wifi dmx

411 #PAR16 left (coarse)#Par 16 led 10W #

#wifi dmx

412 #PAR16 left (fine) #wifi dmx

413 #PAR16 right (coarse)#Par 16 led 10W $

#wifi dmx

414 #PAR16 right (fine) #wifi dmx

415 #leds inside WW (coarse)

#led strip 7

#wifi dmx

416 #leds inside WW (fine) #wifi dmx

417 #leds inside WC (coarse) #wifi dmx


7

!

#

"

$

#"

t

u

v

https://www.malighting.com/product/grandma2-light-120112/


#= provided by PIANO VERTICAL

13. RADIOCOMMUNICATION

13.1. Radios For the communication between PIANO VERTICAL technical crew and the personnel dedicated to the lifting, please provide:


radios 4x professional radios with mics and earphones with full licenses

intercom 4 wireless workstations(Altair, … or equivalent)

14. DRESSING ROOM


nks for providing a dressing room close to the performance area, with the following:

furniture 2x chairs, 1 mirror, 1 clothing rack catering 3 liters of still water, fresh fruit (bananas, apples) convenience towel toilets and shower nearby

14.1. Technical crew Please provide, as far as possible, 1 box for the technical team.

furniture 6 chairs, 1 sofa, 1 table catering 8x liter of water, juice, ... and snack (local products are welcome) convenience toilets nearby

15. PUBLIC RECEPTION AND HEADPHONES MANAGEMENT

15.1. Helmet responsibility: to know... PIANO VERTICAL supplied 200 headphones and the ORGANISER is guarantor for all the duration of the exploitation (assembly, shows, storage between representation, cleaning, dismantling, …)

15.2. Taking headphones Unless otherwise indicated, the helmets will be given to the spectators at the cashier's office or at the controls of the tickets with, if necessary, counterparts (identity card, deposit, etc.). The operation of the helmets is very simple and the setting up is within the reach of all types of audience. In spite of this, the reception staff (the underwriters) will be available to advise the spectators

15.3. Back headphones At the end of the performance, a procedure of return of all the helmets will have to be put in place by the ORGANISER in order to avoid the loss or the theft. Each missing piece will be charged to the ORGANISER. "Room sheet" ...

418 #leds inside WC (fine) #wifi dmx

419 #leds Lid (coarse) #led around the lid (in case of rain)

#wifi dmx

420 #leds Lid (fine) #wifi dmx

451 #rotation piano Master speed

#1ère solution® u

#wifi dmx

452 #rotation piano Sens #wifi dmx

453 #rotation piano Speed #wifi dmx

Channel Label Source Transmission


http://www.altairaudio.com/en/products/communications/wireless-intercom-systems/base-stations.html


15.4. Hand Programmes PIANO VERTICAL will provide the ORGANISER with the content of a notice of performance. It will include a description of the show, distribution, partners and co-producers and a mini manual (in drawing) of the use and management of the helmet. The draw is the responsibility of the ORGANISER (if possible black white / duplex on recycled A4 paper)

16. INSURANCES AND SURVEILLANCE


16.1. Theft, vandalism,… The ORGANISER shall contract all relevant insurances against theft, damages, etc... at no extra cost for PIANO VERTICAL. These insurances shall cover all possible incidents which may happen to all or part of the equipment provided by PIANO VERTICAL, from arrival on site until departure. A detailed list of the material to be insured can be provided on demand.

16.2. Equipment safety The ORGANISER shall make all arrangements for the supervision of the installations and shall provide the personnel for the guarding of the installations, if necessary.


16.3. Special liability insurance PIANO VERTICAL has a special liability insurance covering performance in PIANO VERTICAL outdoors and indoors around the world. (USA and Canada, supplement to the request). A copy of it can be obtained on request.

17. REQUESTED CREW


17.1. Preparation and performance 1x technical manager, who is responsible for all the technicals issues and decisions.

17.2. Sound 1x sound engineer, responsible for the console, HF systems and power supplies 1x helper and follower of HF antennas 4x sound aids for the wiring of the headphone systems+ qualified staff for mounting the sound system 4x people (without technical skills) for the installation before the show and uninstallation of the helmets after the show.

17.3. Flight 1 crane operator (for installation, rehearsals and performance)

17.4. Light 1x light technician, responsible for lighting outside the piano

+ qualified staff for mounting the light system

All staff will be available accordingly to PIANO VERTICAL’s work timesheet, including the set up, rehearsal, performance and clearing.



18. STANDARD SCHEDULE

18.1. The day before the show

arrival (before the closure of the site) 4h00 (13:00-17:00) unloading and distribution piano tuning development implementation piano preparation and accessories

installation and repetitions (as soon as the site closes) 4h00 (17:00-21:00) Sound and Light Control Facilities, preparation and hooking of the piano to the crane, balance (1h) tests, flight rehearsals, pausing the piano (3h00) + installation of the wiring headphones and preamplifiers (4h) + light preparation (4h)

meal (on site or very close) 1h00 (21:00-22:00)

finishes (without crane operator) 2h00 (22:00-00:00) cues light and staging waiting FOH control (night)

18.2. The day of the service (according to the twilight hours)

preparation - 2h00 (03:00-05:00) setting up, unpacking rain protection, tests, ... crane piano hook, line check

Set up - 0h15 (05:00-05:15) global set up (starting position)

public entrance - 0h30 (05:00-05:30)

★ SHOW - 0h45 (05:30-06:15)

> In case of multiple representations

put on hold - 1h30 (06:30-08:30) clean and closing sound and light control uninstall and clean the helmets unplug the piano and put on hold

piano tuning - 2h00 (18:00-20:00)

> In case of last performance

disassembly - 2h00 (06:30-08:30) dismantling sound and light control uninstalling headphones and volumes control unplug the piano and crate

loading - 0h45 (07:45-08:30)



19. SUMMARY OF THE ITEMS TO BE PROVIDED

a construction site with a crane > info venue pictures > info venue map (cadastre), if possible in .dwg > info public area / 200 seats > info piano area > info control aera > info 1 digital mixing console 32x24 (dante) > info 4 sets of wireless systems, antennas included > info 2 sets of wireless in-ear systems, antennas included > info 1 spot kit > info 1 light control console > info 4 radiocommunication devices and 4 wireless intercom > info 1 theft / vandalism insurance / ... > info installations safety device > info l 2 dressing rooms with toilets > info 1 technical director, 1 head sound , 1 head light > info 1 crane operator > info 4 stages hands for headphone installation and cabling > info 4 people for headphones management (before and after the show) > info complementary technical crew (to be de ned during the site inspection) > info


Documents

PV - CHANTIER - Technical Rider v2