Punch BOLT LOCK with retaining plate BOLT LOCK

▶ 2 Subject to alterations

Introduction Punch with retaining plate BOLT LOCKThe development of the BOLT LOCK system is a logical continuation of today's quick-release systems for punches beyond a shaft diameter of 40 mm.

Since the punches are available for any geometries, the compact system can be used for a variety of applications.

An example of this is the use of punches to cut sheet metal parts, which are not manufactured as individual parts, but rather mainly as multiple parts for economic reasons. Large perforations in structured parts of the car body can be manufactured without a problem using the system.

In the area of follow-on composites, the system can also be used to cut the grating or remove the pc board.

The system makes a valuable contribution to the further standardisation of tools and connected advantages in regard to time, costs and quality.

•   Designed as a replacement for today's serially produced parts previously manufactured individually

•   Punches available in standard shapes and customer-specific special shapes according to data record

•   High quality due to automated serial production

•   Cost savings in design due to CAD standard parts library Data in the currently common data formats can be called worldwide directly through fibro.partcommunity.com and is thus always up-to-date free of cost

•   Low spatial requirement as conventional system and therefore also an option for saving operations

•   Geometrical changes of the cutting contour do not affect the retaining plate, thus permitting cost savings in case of changes.

•   Low mounting effort in tool maintenance, quick-release system

•   Punches are provided with extraction thread in the standard version. Lateral borehole in the case of cutting form width W < 20 mm.

▶ 3Subject to alterations

2 2 4 7 . 2 3 E 2 . 1 0 0 0 0 . 0 3 0 0 0 Z

2 2 4 7 . 2 3 E 2 . 1 0 0 0 0 . 0 3 0 0 0 Z

77 = E

160

20

30

100 ±0,01

30±0,01

40

10

+0,1

77

01 ( 80 x 55) = 102 (100 x 40) = 203 (160 x 40) = 304 (120 x 80) = 405 (160 x 120) = 506 (240 x 45) = 6

HWS (1.2379) = 2

= 0**= 1*= 2*= 3= 4= 5

BOLT LOCK = 7

20 = 2

= Z

Ordering example Punch BOLT LOCK

Note: See table for standard dimensions Special dimensions to order

Ordering example:

optional: with retaining plate BOLT LOCK (Z)

Shape: slot, width W = 30 mm (03000)

Shape: slot, length P = 100 mm (10000)

Punch cutting length: l1 = 20 mm (2)

Length: l = 77 mm (E)

Size 03 ( a1 x b1 = 160 x 40 mm ) (3)

Material: HWS (1.2379) = (2)

Type = BOLT LOCK (7)

Version: slot (4)

Punch: without ejecting pin (22)

Version Order Noblankroundsquarerectangularslotrectangle with radiused corners

*only for (a x b): 01, 04, 05 **only available as CAD download Note: Special forms available upon customer's request. Use blank 2207. for CAD data,  see fibro.partcommunity.com.

Punch: 22 without ejector pin

Shape: slot Length P = 100 mm

Shape: slot Width W = 30 mm

Length: lOrder Code character

diametre

Punc

h cu

ttin

g le

ngth

leng

th

Size (a1 x b1) Order No

Material Order No

other materials and coatings available upon request

Type: Order No

Punch cutting length: l1 Order No

optional Order Code characterWith retaining plate BOLT LOCK

▶ 4 Subject to alterations

BOLT LOCK punches can be designed with individual cutting contours. For this purpose, blanks are available as starting models at the fibro.partcommunity.com download portal.

In this starting model, the corresponding cutting contour can be imported using the CAD system after download and preferably sent to FIBRO in STEP format. Six sizes are available at the download portal.

During selection, the maximum dimensions X, Y of the cutting form apply as a limit.

Example:

customer-specific cutting contour - max. dimensions of 110 x 69 mm

Selection of punch BOLT LOCK, blank according to the max. dimensions of the cutting form Size 04 (A1 x B1 : 120 x 80 mm)

Download of model in desired CAD format (e.g.: STEP, CATIA, etc.)

Incorporation of the cutting contour into the punch BOLT LOCK blank model. Send the data to FIBRO in STEP format.

Special designs Punch BOLT LOCK

▶ 5Subject to alterations

Punch BOLT LOCK, Blank

Material: HWS (1.2379) Hardness 60 +2 HRC Other materials available upon request. Description of materials see main catalogue at the beginning of chapter E.

Note: BOLT LOCK punches, blank, cannot be ordered. They are used only for customer-specific cutting contours/special designs.

1b

l30

1a

2207.

Size / (Order No) a1 b1 l / (Order Code character)01 / (1) 80 55 77 / (E)02 / (2) 100 40 77 / (E)03 / (3) 160 40 77 / (E)04 / (4) 120 80 77 / (E)05 / (5) 160 120 77 / (E)06 / (6) 240 45 77 / (E)

2207. Punch BOLT LOCK, Blank

▶ 6 Subject to alterations

Punch BOLT LOCK, Round

2664.11.

2217.

1l

30

10

+0,1

l

b1

1a

P±0,01

2217.

Material: HWS (1.2379) Hardness 60 +2 HRC Other materials available upon request. Description of materials see main catalogue at the beginning of chapter E.

Execution: Punch BOLT LOCK, Round are provided with an extraction thread (M10).

Note: Order No. for Punch BOLT LOCK, Round with retainer BOLT LOCK including screws and pins: 2217.2□E2.□□□□□Z

Size / (Order No) a1 b1 Pmin Pmax l1 / (Order No) l / (Order Code character)01 / (1) 80 55 35 54.9 20 / (2) 77 / (E)04 / (4) 120 80 50 79.9 20 / (2) 77 / (E)05 / (5) 160 120 75 119.9 20 / (2) 77 / (E)

2217. Punch BOLT LOCK, Round

Mounting example

Ordering-code (example):

Format: Round Punch cutting length: l1 Order No Length: l Order code character Size: Order No Material: Order No Typ: Order No Version: Order No   Round    Punch: without ejector pin

2 2 1 7 . 2 1 E 2 . 0 5 0 0 0

P = ∅ 50 mm = 05000 20 mm = (2) 77 mm = (E) 01 (a1 x b1: 80 x 55 mm) = (1)   HWS (1.2379)  = (2) BOLT LOCK = (7) = (1) = 22

▶ 7Subject to alterations

Punch BOLT LOCK, Square

Material: HWS (1.2379) Hardness 60 +2 HRC Other materials available upon request. Description of materials see main catalogue at the beginning of chapter E.

Execution: Punch BOLT LOCK, Square are provided with an extraction thread (M10).

Note: Order No. for Punch BOLT LOCK, Square with retainer BOLT LOCK including screws and pins: 2227.2□E2.□□□□□Z

b

P±0,01

1l

+0,1

l30

10

1

P ±0,01

1a

2227. Mounting example

2664.11.

2227.

Size / (Order No) a1 b1 Pmin Pmax l1 / (Order No) l / (Order Code character)01 / (1) 80 55 35 54.9 20 / (2) 77 / (E)04 / (4) 120 80 50 79.9 20 / (2) 77 / (E)05 / (5) 160 120 75 119.9 20 / (2) 77 / (E)

2227. Punch BOLT LOCK, Square

2 2 2 7 . 2 1 E 2 . 0 4 0 5 0 P = 40,5 mm = 04050 20 mm = (2) 77 mm = (E) 01 (a1 x b1: 80 x 55 mm) = (1)   HWS (1.2379)  = (2) BOLT LOCK = (7) = (2) = 22

Ordering-code (example): Format: Square Punch cutting length: l1 Order No Length: l Order code character Size: Order No Material: Order No Typ: Order No Version: Order No Square Punch: without ejector pin

▶ 8 Subject to alterations

Punch BOLT LOCK, Rectangular

Mounting example

2664.11.

2237.1030

1l

+0,1

lW

±0,01

1b

1a

P ±0,01

2237.

Material: HWS (1.2379) Hardness 60 +2 HRC Other materials available upon request. Description of materials see main catalogue at the beginning of chapter E.

Execution: Punch BOLT LOCK, Rectangular are provided with an extraction thread (M10). For cutting form width W < 20 mm, the punch is provided with a transverse bore (∅ 10 mm).

Note: Order No. for Punch BOLT LOCK, Rectan-gular with retainer BOLT LOCK including screws and pins: 2237.2□E2.□□□□□.□□□□□Z

Size / (Order No) a1 b1 Pmin Pmax Wmin Wmax l1 / (Order No) l / (Order Code character)01 / (1) 80 55 55 79.9 10 54.9 20 / (2) 77 / (E)02 / (2) 100 40 40 99.9 10 39.9 20 / (2) 77 / (E)03 / (3) 160 40 40 159.9 10 39.9 20 / (2) 77 / (E)04 / (4) 120 80 80 119.9 10 79.9 20 / (2) 77 / (E)05 / (5) 160 120 120 159.9 10 119.9 20 / (2) 77 / (E)06 / (6) 240 45 45 239.9 10 44.9 20 / (2) 77 / (E)

2237. Punch BOLT LOCK, Rectangular

2 2 3 7 . 2 1 E 2 . 0 7 0 5 0 . 0 4 5 5 0 W = 45,5 mm = 04550 P = 70,5 mm = 07050 20 mm = (2) 77 mm = (E) 01 (a1 x b1: 80 x 55 mm) = (1)   HWS (1.2379)  = (2) BOLT LOCK = (7) = (3) = 22

Ordering-code (example): Format: Rectangular, width W Format: Rectangular, length P Punch cutting length: l1 Order No Length: l Order code character Size: Order No Material: Order No Typ: Order No Version: Order No   Rectangular    Punch: without ejector pin

▶ 9Subject to alterations

Punch BOLT LOCK, Slot

Material: HWS (1.2379) Hardness 60 +2 HRC Other materials available upon request. Description of materials see main catalogue at the beginning of chapter E.

Execution: Punch BOLT LOCK, Slot are provided with an extraction thread (M10). For cutting form width W < 20 mm, the punch is provided with a transverse bore (∅ 10 mm).

Note: Order No. for Punch BOLT LOCK, Slot with retainer BOLT LOCK including screws and pins: 2247.22□E2.□□□□□.□□□□□Z

30

1a

P ±0,01

W±0,01

1b

10

1l

+0,1

l

2247. Mounting example

2664.11.

2247.

Size / (Order No) a1 b1 Pmin Pmax Wmin Wmax l1 / (Order No) l / (Order Code character)1 / (1) 80 55 55 79.9 10 54.9 20 / (2) 77 / (E)2 / (2) 100 40 40 99.9 10 39.9 20 / (2) 77 / (E)3 / (3) 160 40 40 159.9 10 39.9 20 / (2) 77 / (E)4 / (4) 120 80 80 119.9 10 79.9 20 / (2) 77 / (E)5 / (5) 160 120 120 159.9 10 119.9 20 / (2) 77 / (E)6 / (6) 240 45 45 239.9 10 44.9 20 / (2) 77 / (E)

2247. Punch BOLT LOCK, Slot

2 2 4 7 . 2 1 E 2 . 0 7 0 5 0 . 0 4 5 5 0 W = 45,5 mm = 04550 P = 70,5 mm = 07050 20 mm = (2) 77 mm = (E) 01 (a1 x b1: 80 x 55 mm) = (1)   HWS (1.2379)  = (2) BOLT LOCK = (7) = (4) = 22

Ordering-code (example): Format: Slot, width W Format: Slot, length P Punch cutting length: l1 Order No Length: l Order code character Size: Order No Material: Order No Typ: Order No Version: Order No Slot Punch: without ejector pin

▶ 10 Subject to alterations

Punch BOLT LOCK, Rectangular with radiused corners

Mounting example

2664.11.

2257.W

+0,1

l30

10

1l

R0,5

±0,01

1b

P ±0,01

1a

2257.

Material: HWS (1.2379) Hardness 60 +2 HRC Other materials available upon request. Description of materials see main catalogue at the beginning of chapter E.

Execution: Punch BOLT LOCK, Rectangular with radi-used corners are provided with an extraction thread (M10). For cutting form width W < 20 mm, the punch is provided with a transverse bore (∅ 10 mm).

Note: Order No. for Punch BOLT LOCK, Rectan-gular with radiused corners with retainer BOLT LOCK including screws and pins: 2257.2□E2.□□□□□.□□□□□Z

Size / (Order No) a1 b1 Pmin Pmax Wmin Wmax l1 / (Order No) l / (Order Code character)01 / (1) 80 55 55 79.9 10 54.9 20 / (E) 77 / (E)02 / (2) 100 40 40 99.9 10 39.9 20 / (E) 77 / (E)03 / (3) 160 40 40 159.9 10 39.9 20 / (E) 77 / (E)04 / (4) 120 80 80 119.9 10 79.9 20 / (E) 77 / (E)05 / (5) 160 120 120 159.9 10 119.9 20 / (E) 77 / (E)06 / (6) 240 45 45 239.9 10 44.9 20 / (E) 77 / (E)

2257. Punch BOLT LOCK, Rectangular with radiused corners

2 2 5 7 . 2 1 E 2 . 0 7 0 5 0 . 0 4 5 5 0 W = 45,5 mm = 04550 P = 70,5 mm = 07050 20 mm = (2) 77 mm = (E) 01 (a1 x b1: 80 x 55 mm) = (1)   HWS (1.2379)  = (2) BOLT LOCK = (7) = (5) = 22

Ordering-code (example): Format: Rectangle with radiused corners, width W Format: Rectangle with radiused corners, length P Punch cutting length: l1 Order No Length: l Order code character Size: Order No Material: Order No Typ: Order No Version: Order No Rectangle with radiused corners Punch: without ejector pin

▶ 11Subject to alterations

Retainer BOLT LOCK

16

11

17,5

16,5

ø17

80

60

42

ø10,5

ø8 H7

±0,0124

14,5

31

55

≈15

±0,01

15

21

2664.11.01

16

±0,0186

100

36

80

ø17

ø8 H7

11

31

9,5

14,5

40

≈15

±0,01

10

21

ø10,5

2664.11.02

Material: HWS (1.2379) Hardness 60 +2 HRC

Note: Delivery including socket cap screws DIN EN ISO  4762 and pins DIN EN ISO 8735

Material: HWS (1.2379) Hardness 60 +2 HRC

Note: Delivery including socket cap screws DIN EN ISO  4762 and pins DIN EN ISO 8735

▶ 12 Subject to alterations

Retainer BOLT LOCK

ø10,5

7

±0,01

11

160

135

64

±0,01120

ø17

ø8H7

40

31

16

≈15

10

14,5

21

2664.11.03

50

16

ø20

ø13,5

ø10 H7

120

50

90

±0,0130

21

13

31

14,5

80

≈15

±0,01

20

2664.11.04

Material: HWS (1.2379) Hardness 60 +2 HRC

Note: Delivery including socket cap screws DIN EN ISO  4762 and pins DIN EN ISO 8735

Material: HWS (1.2379) Hardness 60 +2 HRC

Note: Delivery including socket cap screws DIN EN ISO  4762 and pins DIN EN ISO 8735

▶ 13Subject to alterations

Retainer BOLT LOCK

16

13

ø13,5

ø10 H7

ø20

160

120

60

±0,01135

21

31

14,5

80

120

≈15

±0,01

5

2664.11.05

ø10 H7

20

16

13

ø13,5

ø20

120

210

±0,01210

21

14,5

31

≈15

45 ±

0,01

12,5

2664.11.06

240

Material: HWS (1.2379) Hardness 60 +2 HRC

Note: Delivery including socket cap screws DIN EN ISO  4762 and pins DIN EN ISO 8735

Material: HWS (1.2379) Hardness 60 +2 HRC

Note: Delivery including socket cap screws DIN EN ISO  4762 and pins DIN EN ISO 8735

▶ 14 Subject to alterations

▶ 15Subject to alterations

Standard Parts

FIBRO GmbH DE August-Läpple-Weg 74855 Hassmersheim T +49 6266 73-0 F +49 6266 73 237 info@fibro.de

FIBRO France Sarl  FR 26, avenue de l’Europe 67300 Schiltigheim T +33 3 90 20 40 40  F +33 3 88 81 08 29 info@fibro.fr

FIBRO Inc.  US 139 Harrison Avenue Rockford, IL 61104 T +1 815 2 29 13 00 F +1 815 2 29 13 03 info@fibroinc.com

FIBRO Asia Pte. Ltd.  SG 9, Changi South Street 3, #07-04 Singapore 486361 T +65 65 43 99 63  F +65 65 43 99 62 info@fibro-asia.com

FIBRO INDIA   IN PRECISION PRODUCTS PVT. LTD. Plot No: A-55, Phase II, Chakan Midc, Taluka Khed, Pune - 410 501 T +91 21 35 33 88 00 F +91 21 35 33 88 88 info@fibro-india.com

FIBRO (SHANGHAI)  CN PRECISION PRODUCTS CO., LTD. 1st Floor, Building 3, No. 253, Ai Du Road Pilot Free Trade Zone, Shanghai 200131 T +86 21 60 83 15 96 F +86 21 60 83 15 99 info@fibro.cn

FIBRO KOREA CO., LTD. KR 203-603, Bucheon Technopark Ssangyong 3 397, Seokcheon-ro, Ojeong-gu,  Bucheon-si, Gyeonggi-do T +82 032 624 0630 F +82 032 624 0631 fibro_korea@fibro.kr

www.fibro.com

07/2017 © Copyright by FIBRO GmbH

Printed in Germany on paper bleached without chlorine 

Ord

er N

o. 2

.240

2.00

.031

7.01

0000

0