Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
OE Electrics Puma July 2019 | 1
A super compact panel mounted unit providing fl exible modular power and data distribution.
PUMA may be fi tted not just to screens but just about any panel within the furniture range from modesty panels to soft furnishings - PUMA may be specifi ed to meet particular requirements.
Mains power sockets formats for most countries together with a wide range of data outlets.Special units with remote switches, thermal resettable fuses, power cleaners.
Standard colour is grey or black frame and sockets, other colours are available subject to minimum order quantities.
All OE Electrics products are manufactured to enable compliance with BS6396 or BS7671 where relevant.
UK sockets incorporate fuses as standard with colour coded inserts indicating fuse rating.
USPs• Super compact panel mounted unit• Available with TUF charger• Numerous fi tting options• Available in 2 gang or 3 gang• BS6396 compliant (where applicable)• Available with sockets from different
nationalities
puma
Screw ports available for panels thicker
than 3mm
plastic screw caps to neatly hide frame
screws where country standards requireversatile cable grip
rotates to allow cable to exit via side or rear. Allows PUMA to fit into a minimum cavity depth of 30mm
unique slot in rear for data exit
clips allow PUMA to be snapped into 1.45 - 3mm panels
OE Electrics Puma July 2019 | 2
technicalFeaturesConfi guration:Power only / Data only / Combined (Power & Data/AV)Internal segregation between Power and Data/AV in combined PUMA
Fusing: (to enable compliance to BS6396)5 x 20mm anti-surge ceramic fuses, with colour-coded fuseclips to denote the rating (3.15A/5A)
Earth Bonding: A 250mm earth lead can be included to allow earth bonding to furniture.
Insulation: Re-inforced insulation
Soft Wiring (power)Power wired to Wieland GST connector allows starter cables to be changed to suit requirements, especially useful during moves and changes (CHURN)Rotating cable grip means the cable can exit via the rear or the side without the need for tools, allowing PUMA to be mounted in a minimum cavity depth of 30mm.
Soft Wiring (data)As well as soft-wired power, PUMA can accommodate soft wired data. Using our inline couplers, data cables can be changed “on-site” to accommodate changes in length often associated with churn. (Some smaller cavities may require data to exit from the side, this would require partial disassembly to change on site)
30.0
14.5
Deep Cavity
Shallow Cavity Installation into shallow cavities requires end entry data: max panel
thickness 3mm (+/- 0.1mm)2
1
Installation into deep cavities allows rear entry data. Fits any panel
thickness >1.45mm(+/- 0.1mm)
Data is hardwired from PUMA in thin cavity situations
1
Shallow Cavity
*See website for more
French/Belgian
Indian Italian
Swiss Chinese Australian USA/Japan
Twin dataSwitch
UK fused UK unfused Schuko
VGA
CAT.5e CAT.5e
FUSE
MAXM
Common Modular Components*
TUF-R A+C25W
Certifi cations:UL962A/CSA22.2
OE Electrics Puma July 2019 | 3
technical
Puma 3 gang dimensions Puma 2 gang dimensions
We test every pin on
every connection in every
socket
Quality and Testing:All PUMA units are manufactured using ISO9001 quality controlled components and practices and are 100% tested before dispatch.• Visual: Configuration and appearance.• Power sockets: Continuity, polarity, insulation & earth• USB charger: Output voltage and resistance• Data & AV: All sockets continuity tested with batch performance testing.
CE Marking:All units built with UK and European socket types are CE marked by OE Electrics
Certifications:BS6396 or BS7671 where relevant.
Features
Colour:PUMA is available as standard in black with black sockets, or grey with grey sockets.
193.3mm
140.3mm
52.3mm
52.3mm
±0.2mm
±0.2mm
±0.2mm
±0.2mmR=3mm max
R=3mm max
Cutout sizes required
Puma 3 gang cutout
Puma 2 gang cutout