PUDUCHERRY SCHEDULE OF RATES - ponpwd.puducherry.gov.in/document/PSR_Puducherry_2011_12.pdf · The Puducherry Schedule of Rates 2011-12 incorporates all the items ... But this PSR

GOVERNMENT OF PUDUCHERRY

PUBLIC WORKS DEPARTMENT

High Level Bridge, Soriankuppam

PUDUCHERRY SCHEDULE OF RATES

2011 - 2012

PUDUCHERRY REGION

GOVERNMENT OF PUDUCHERRY

PUBLIC WORKS DEPARTMENT

PUDUCHERRY SCHEDULE OF

RATES

2011-2012

PUDUCHERRY REGION

PREFACE

1. Puducherry Schedule of Rates 2011-12 are updated edition of the PSR 2010-11.

2. The Puducherry Schedule of Rates 2011-12 incorporates all the items included in the PSR

2010-11 and correction slip issued from time to time besides new items. The specifications of the

items have been upgraded to the latest CPWD specification 2007. The Schedule of Rates is

based on the current market rates for materials and labour. The basic rates have been

obtained from Department of Economics & Statistics, all the Circles, Divisions, Builders

Association of India and from the leading manufacturers for branded products, local market

and DGS&D rates and the same have been finalized in the PSR meeting. The finished rates were

arrived by using CPWD analysis of rates 2007 and finalized by convening the PSR Standing

Committee meeting on 27/06/2011 as per O.M.No. 4090/669/06-PW (B1) dt: 12/01/2007.

3. The Standing Committee of Schedule of Rate was framed under the Chairmanship of

Thiru S. MANOHAR, Chief Engineer of Public Works Department, Puducherry, with the following

members.

TVL:

S. Manohar Chief Engineer, PWD Chairperson

S. Manohar Superintending Engineer - Circle-I, PWD Member

N. Manthaiyan Superintending Engineer - Circle-II, PWD Member

V. Kanagaraj Superintending Engineer Circle-III, PWD

Member

S. Vaittianadane Director of Economics & Statistics Member

S. Alphonse Under Secretary (Works)

Member

P. Arivazhagan Executive Engineer (Planning) - Central office Member

J. Jayakumar Executive Engineer - Public Health, PWD

Member

V. Sathiamurthy Executive Engineer Irrigation, PWD Member

Thiru R. Sanjeevi Senior Accounts Officer, PWD Member

P. Arivazhagan Executive Engineer Designs (in-Charge), PWD Member Secretary

4. The PSR Standing Committee meeting was convened on 27/06/2011 Puducherry Region

and finalized the basic rates of materials and labourers In the presence of all the Executive

Engineers, contractors, members of Builders Association of India and PWD Registered

Contractors Association, Puducherry.

5. The Delhi Schedule of Rates 2007 has been taken as a reference for inclusion of new

materials in respect of building works. Finished rates for building works have been adopted as

per the CPWD analysis of rates 2007. The specifications and analysis for the items under bridge

works are based on the Ministry of Road Transport and Highways (MORTH & MOST). Labour rates

and material rates have been finalized for the regions namely Puducherry, Karaikal and Mahe

and exclusive Schedule of Rates has been brought out separately for each region.

6. The rates and specifications incorporated in the PSR 2011-12 will become effective from

01/04/2011.

7. For works which are in riverbed (for river over 20 metre widths only) add 10% extra on

labour, earthwork and conveyance of materials within the riverbed. This extra percentage

should not be allowed for the cost of materials.

8. Within the Central Jail Compound 10% extra and Sub-Jail compound 5% extra is allowed

over the rates of labour, rates of works involving labour and rates for conveyance of materials

for the portion inside the jail campus (i.e. for the distance within the Jail Compound).

9. The current rate contracts running contracts in existence have been adopted for

materials which are having rate contracts and running contracts.

10. Hire charges for plants, rates for materials, labourers and technical staff indicated in this

PSR are only to prepare the analysis of rates.

11. The works which are to be executed during night times due to heavy traffic during day

times and for various technical and administrative reasons and for major building works which

involves works during night times for continuity, will involve extra expenditure by way of making

arrangements of lighting and special transportation for working parties to odd hours. In the light

of the above nature, the Executive Engineers at their discretion may exercise their judgment

and cater for the additional cost to the maximum extent of 5%, keeping in view, the severities

and factors mentioned above. Support details for the extra cost based on actual site conditions

in specific cases will have to be provided with proper justification.

12. Suggestions from all sectors are invited for the improvement and refinement of this

schedule of rate.

SALIENT FEATURES OF PUDUCHERRY SCHEDULE OF RATES 2011-12

1.0 This Puducherry Schedule of Rates 2011-12 is the revised edition of Puducherry Schedule

of Rates 2010-11. But this PSR is totally based on the latest CPWD analysis of rates 2007.

2.0 This PSR 2011-12 incorporates items of PSR 2010-11 with all correction slips. The

nomenclature of many items has been improved by making it more generic and

comprehensive.

3.0 Efforts have been made to introduce items pertaining to execution of different works by

using various electrical and mechanical equipments i.e. excavators, tower cranes,

mobile cranes, mechanical platforms, batch mix plant, transit mixers and pumps, piling

rigs, pneumatic cutters, chisels, chippers, hammers etc. Built-in provision has been taken

in the analysis of rates for new construction technology/mechanisation.

4.0 Items of dry work using prefabricated materials and pre-finished elements are included

for speedier construction viz gypsum block walls, calcium silicate and non-asbestos

cement board partitions, pre-finished counter tops for kitchen and washbasins, pre-

moulded and pre-finished stone work in risers and treads of steps and window sills, dry

stone cladding, sub-frames for windows, use of chemical and mechanical fasteners,

laying of tiles in flooring and dado with polymer based adhesives etc.

5.0 The new items introduced in this PSR will have new code nos. as indicated in the list of

basic materials.

6.0 Generally, the basic rates of materials, incorporated in the schedule, are pertaining to

materials conforming to BIS standards/CPWD specifications/materials of best quality

available in the market.

7.0 Lump sum provision of labour / T&P is replaced with mechanisation inputs. Prominent

items incorporating mechanization are earthwork in excavation, RMC/ BMC, brick work

in superstructure above floor-V level, road work, dismantling of RCC work, dismantling of

CC and flexible pavements, pile work etc.

8.0 Sub head wise salient features are as follows:

8.1 Earth work: Items of earth work in excavation in soils, ordinary rocks and hard

rocks by manual means have been modified to manual or mechanical means

and component of mechanization is included with corresponding reduction in

labour component.

8.2 Mortars: Items with lime mortar which are not in use now a days have been

deleted.

8.3 Concrete Work: Items of lime concrete which are not in use now a days are

deleted. Number of uses of steel and wooden shuttering reduced from 80 and

16 times to 40 and 8 times respectively, so that proper quality of shuttering is put

to use. In addition to this water proof plywood of 12mm thick centering with

spans and jacks have been newly introduced in this PSR.

8.4 Reinforced Cement Concrete: Minimum mix of RCC is kept as M25 instead of

M20 concrete, considering CPWD specifications, 2002 and IS:456:2000 for

durability of structures. New item of form work with 12mm water proof ply has

been included. Use of fly ash conforming to Grade-I of IS:3812 (pt.1):2003 has

been allowed in batch mix concrete and ready mixed concrete as part

replacement of OPC. Fly ash should be uniformly blended with cement in

accordance of Clause 5.2 & 5.2.1 of IS-456. Number of uses of steel and wooden

shuttering reduced from 80 and 16 times to 40 and 8 times respectively, so that

proper quality of shuttering is put to use. New item of applying decentring

chemical to the centering surfaces has also been included.

8.5 Brick Work: Items pertaining to brick work with lime mortar is deleted, since this

item is not in use now a days. Items of auto-claved aerated cement block

masonry, mechanized auto-claved fly-ash lime bricks & gypsum panel partitions

included. Fly-ash lime bricks are used upto plinth level of all building works and

compound wall structures. Also use of quarry dust filling in place of stand filling is

proposed to balance the on growing demand of sand for construction activities.

8.6 Stone Work: New items of stone work for providing and fixing dry cladding at all

heights with 40mm thick gang saw cut sand stone etc., and structural steel frame

work for stone cladding (to be paid in kg.) has been added. Items of stone

masonry in cement mortar with fine sand and with lime mortar are deleted.

8.7 Marble Work: Measurement for area of marble/granite stone flooring modified

to two groups of up to 0.50 sqm and over 0.50 sqm. Items of pre-moulded and

pre-polished flooring in treads/ risers of staircase, kitchen/ washbasin counters

and window sills have been provided.

8.8 Wood Work: In addition to the existing Burma teak wood and Padauk wood,

imported vengai wood has been included for Puducherry and Karaikal regions

alone. Flush door shutters, veneer boards etc., wherever not mentioned in the

items earlier, have been added now. Ordinary glass panes substituted with float

glass which is to be specified by thickness and not by weight. Items of bamboo

jaffery fencing, magnetic catcher in cup board, mortice lock, telescopic drawer

channel included. FRP flush & panelled doors & frames and FRP chajjas

included.

8.9 Steel Work: Steel glazed doors and windows fixed, side hung, top hung, centre

hung, composite units including mullion bar and steel beadings are clubbed

together and to be paid in Kg in one item instead of earlier being measured in

sqm. Nomenclature modified to specify Flash welding and Factory made steel

glazed doors and windows in item. Stainless steel handrail has been newly

introduced.

8.10 Flooring: Items pertaining to extra for brick flooring in specified pattern, 25mm

and 50mm thick CC flooring, flooring and skirting in red oxide and other items not

in frequent use deleted. Laying tiles in flooring and dado with polymer based

adhesives included. Many ceramic/vitrified companies such as Asian, NITCO,

Kajaria and RAK tiles for different sizes are followed in addition to the existing tiles

and also commercial quality tiles are introduced. Dazzle/ technic brands for

concrete based stones are included in addition to the existing Ultra/Eurocon

brands.

8.11 Roofing: Non-asbestos cement sheet provided in place of asbestos cement

sheet roofing, items of corrugated GS sheet roofing-1.60mm thick and 1.25mm

thick deleted as theses are not readily available. 20mm thick wooden planks

ceiling, 18mm insulating board, 18mm flame retardant board on roofs deleted as

boards of these thicknesses are not readily available. Gypsum false ceiling,

Diakin mineral false ceiling tiles, aluminium composite panel works have been

included. Water proofing in terrace works and sunken floors have been

included. Colour coated roofing sheets has been included.

8.12 Finishing: Flush/ruled/struck/weathered pointing in brick work, tile work and stone

work clubbed. New item of 12mm thick gypsum plaster on brick/RCC surfaces

added. Items of plaster with lime deleted. Providing and mixing water proofing

material is to be paid in Kg per bag of cement instead of sqm.

8.13 Repair to Building: Making opening in brick masonry for doors, windows and

clerestory windows to be paid in sqm instead of being paid in numbers. Fixing

chowkhats in brick/RCC opening with mechanical/ chemical fasteners included.

Double scaffolding for repairs to building included. Items of wooden cleats,

safeda posts and hillock ballies deleted. Pointing with lime putty on brick/ tile

work deleted. Coal tarring on old work, floor painting with enamel paint, rubber

plug for sink/ wash basin etc., deleted. Ordinary glass panes changed to float

glass and thickness to be measured in mm. instead of weight.

8.14 Dismantling and Demolishing: New item of dismantling and demolishing by

pneumatic hammers, chisels, chippers etc., included.

8.15 Miscellaneous: UPVC windows has been additionally included.

8.16 Sanitary Installations: Items of long pan WC, CP brass trap and union, GI chain

with GI pull are not in use not a days and hence deleted. Relevant IS 1729 has

been mentioned with fittings of sand cast iron pipes. Fittings of centrifugally cast

iron pipes have been modified as Sand cast iron S&S as per IS:3989 from

existing Centrifugally cast (spun) iron S&S, as fittings are not manufactured by

centrifugal process.

8.17 Water supply: CPVC pipes included. Item of close hole basin mixer pillar tap has

been deleted and ASTM pipes have been included. Supreme pipe has been

included along with the existing Jain and Finolex pipes for the sizes of 50mm and

above diameter pipes only. All the other ISI brand pipes such as Nandi, Trubore,

Prince etc., are included along with the existing companies from 15mm dia to

75mm dia pipes. Likewise Jai Balaji, TATA Metaliks Kubota DI pipes has been

included in addition to JINDAL, LANCO, Electro steel and Electrotherm brands. It

was also suggested by the PSR committee to provide ASTM and CPVC pipes

instead of GI pipes for open and concealed plumbing pipes.

8.18 Drainage: Item of stone ware pipes Grade-A with mixture of cement mortar 1:3

for storm water drains deleted. P-traps of size 125 x 100 and 180 x 100 deleted.

Manholes of size 90 x 80 and 60cm deep deleted as items of 45 cm depth and

extra for depth beyond 45 cm are available. Circular manholes 0.91m dia, 1.6m

deep deleted as items of 0.91m depth and extra for depth are available.

Similarly, circular manholes 1.22m dia, 2.29m deep and circular manholes 1.52m

dia, 4.18m deep deleted. Brick masonry open surface drain deleted. Brick

masonry work, plaster and excavation etc., shall be measured as per actual.

Item of Grease trap deleted as not executed now a days.

8.19 Pile Work: Mechanical equipments such as hydraulic piling rig, crane, bentonite

pump, vibrating pile driving hammer etc., have been introduced in place of

lump sum provisions. The labour coefficients have been reduced due to the

provisions made for mechanical equipments. Piles up to 1500mm dia have been

incorporated.

8.20 Aluminium Work: Powder coated and polyester powder coated aluminium

sections and Z sections included. Ordinary glass panes substituted with float

glass panes, MS adjustable hangers substituted with GI adjustable hangers for

false ceiling. Extra for providing anodic coating AC 25 instead of AC 15 on

aluminium sections included. Items of weather silicon sealant double glazed

hermetically sealed glazing added. Stainless steel adjustable friction window

stays for easy cleaning of glass on both sides from the room also included.

Aluminium sub-frame for windows and ventilators included. New items of tubular

handle bar with anodizing, powder coating and polyester powder coating, brass

lock for aluminium doors, aluminium window fasteners for windows, aluminium

round shape handles etc., included.

8.21 Horticulture & Landscaping: Rates of the items updated.

9.0 In Road Work (Morth) RBI GRADE 81 items are introduced for sub-grade course, sub-

base course and base course.

10.0 Due care has been taken to print the Schedule of Rates as correctly as possible. It is,

however, possible that some errors might have crept in. In case any error or omission is

noticed, it may be brought to the notice of the Executive Engineer, Computer Design

Centre, PWD, Puducherry.

11.0 Suggestions for improvement are welcome.

ACKNOWLEDGEMENT

The Schedule of Rates 2011-12 was finalized by the Standing Committee of Puducherry

Schedule of Rates under the Chairmanship of Thiru S.Manohar, Chief Engineer, PWD, Puducherry

and is gratefully acknowledged. Without the guidance and encouragement of whom, this work

would have not become a success.

The sincere efforts taken by the PSR Standing Committee of Puducherry comprising of

Thiru S.Manohar, Chief Engineer, Thiru N.Manthaiyan, Superintending Engineer (Circle-II), Thiru

V.Kanagaraj, Superintending Engineer (Circle-III), officials from the Director of Economics and

Statistics, Thiru S.Alphonse, Under Secretary (Works), Thiru P.Arivazhagan, Executive Engineer

(Designs), all other Committee Members and other staff of the Computer Design Centre, who

have put up sincere effort in bringing out this Schedule of Rates 2011-12 is acknowledged.

In this juncture the sincere efforts put forth by the committee members in bringing out this

Schedule of Rates are most acknowledgeable. Similarly the sincere efforts and strenuous work

done in compiling the new PSR 2011-12 through the computer software and based on the latest

CPWD analysis 2007 by the officials and staff of Computer Design Centre viz. Thiru S. SURESH,

Assistant Engineer, Tmt. M. Sarassou, Junior Engineer, Thiru T. Sivakoumar, Work Assistant,

Thiru R.Batmanabane, Work Assistant, Thiru K.Venkatachalapathy, Thiru S.Saravanakumar,

Thiru V.Thamizvel, Tmt. V.Veerasundari Rathna, Draughtsman and Ms. A.A.J.Jacintha,

Draughtsman are to be congratulated.

The encouragement, enthusiasm and involvement of all the Superintending Engineers,

Executive Engineers, Architect and all those who have directly and indirectly participated in

bringing out this Schedule of Rates are also acknowledged.

Sl. No Name of Sub-Head Page No.

BASIC RATE

1. Hire Charges of Plants 1

2. Labour 2

3. Materials For Building Work & Services 5

4. Hire Charges, Labour & Materials For Road Work 112

5. Hire Charges, Labour & Materials For Bridge Work 119

6. Carriage 123

BUILDING WORK

2. Earth Work 125

4. Concrete Work 138

5. Reinforced Concrete Work 146

6. Brick Work 160

7. Stone Work 167

8. Marble Work 181

9. Wood Work 185

10. Steel Work 232

11. Flooring 239

12. Roofing 262

13. Finishing 283

14. Repairs to Buildings 295

15. Dismantling & Demolishing 308

16. Miscellaneous Building Works 318

SERVICES

17. Sanitary Installations

18. Water Supply 350

19. Drainage 402

20. Pile Work 423

21. Aluminum Work 441

22. Water Proofing 449

23. Horticulture and Landscaping 458

30. Irrigation 464

31. Water Supply (Public Health) 473

C O N T E N T S

Sl. No Name of Sub-Head Page No.

32. Sewerage (Public Health) 648

33. Miscellaneous (Public Health) 679

34. OHT Works 694

35. Subsoil Exploration 696

ROAD WORK (MOST)

4. Granular Sub-Base 700

6. Bituminous Construction 701

7. Culverts 703 ROAD WORK (MORTH)

2. Site Clearance and Dismantling 708

3. Earth Work 717

4. Granular Sub-Base 724

5. Base and Bituminous Construction 739

6. Cement Concrete Pavement 746

8. Traffic Signs, Marking & Other Road Appurtenances 748

9. Pipe Culverts 758

10. Maintenance of Roads 759

11. Horticulture 761

12. RBI Grade 81 765

BRIDGE WORK (MORTH)

12. Foundation 767

13. Sub Structure 785

14. Super Structure 792

15. River Training & Protection Works 710

16. Repairs & Rehabilitation 812

CEMENT CONSUMPTION STATEMENT

1. Building Work 814

2. Road work (MOST) 945

3. Road work (MORTH) 948

4. Bridge Work 959

BITUMEN CONSUMPTION STATEMENT (MOST & MORTH)

1. Road Work 994

BASIC RATE

PUDUCHERRY REGION

BASIC RATES FOR BUILDINGS WORKS

Sl.No. Code No. Description Unit Rate in Rs.

HIRE CHARGES OF PLANTS

1 0002 Hire charges of Concrete Mixer 0.14 cubic metre Day 1500.00

2 0003 Hire charges of Diesel Road Roller - 8 to 10 tonne Day 3000.00

3 0004 Production cost of concrete by batch mix plant cum 260.00

4 0006 Hire charge of Spraying machine including electric charges Day 220.00

5 0009 Pumping charges of concrete including h/c of pump, piping work accessories etc. cum 100.00

6 0010 H/C of derrick monkey rope day 675.00

7 0011 H/C of Pump set of capacity 4000 litres/ hour day 750.00

8 0012 Vibrator (Needle type 40mm) day 650.00

9 0013 Machine for rubbing of floors day 275.00

10 0015 Excavator(120) day 12400.00

11 0017 Hire and running charges of tipper day 3000.00

12 0018 Hire and running charges of loader day 5350.00

13 0019 Hand grinder for mirror polish day 100.00

14 0020 Hydraulic excavator(3D)with driver and fuel day 6500.00

15 0020A Crane hire charges including all operation MT 23.00

16 0024 Hire & running charges of hydraulic piling rig with power unit etc.incl.complete day 28000.00

17 0025 Hire & running charges of light crane day 3200.00

18 0026 Hire & running charges of bentonite pump day 4000.00

19 0027 H/R charges of vibrating pile driving hammer complete power unit & accessories day 28000.00

20 0028 H/R charges of crane 20 tonne capacity day 8000.00

21 0029 H/C for transit mixer cum 420.00

Puducherry Page 1


22 0029A H/C for transit mixer (beyond 10km lead) Cum 40.00

23 0037 Mobile crane day 3200.00

24 0038 Tractor with ripper attachment day 2840.00

25 0039 Tractor with trolley day 2640.00

26 0040 Air compressor 250 cfm with two leads for pneumatic cutters/hammers day 2500.00

27 0041 Joint cutting machine with 2-3 blades day 800.00

28 Excavator(60) hour 770.00




32 Note:Above hire charges includes cost of services of operating staff and supply of lubricating oil and fuel charges

LABOUR

33 0100 Bandhani day 290.00

34 0101 Bhisti day 270.00

35 0102 Blacksmith 1st class day 325.00

36 0103 Blacksmith 2nd class day 300.00

37 0111 Carpenter 1st class day 450.00

38 0112 Carpenter 2nd class day 400.00

39 0113 Chowkidar day 275.00

40 0114 Beldar day 290.00

41 0114A Survey Assistant each 300.00

42 0114B Wooder I class each 300.00

43 0115 Coolie day 275.00

44 0116 Fitter (grade 1) day 450.00

Puducherry Page 2


45 0117 Assistant fitter or 2nd class fitter day 400.00

46 0119 Glazier day 400.00

47 0122 Mason (for plaster of paris work) 1st class day 450.00

48 0123 Mason (brick layer) 1st class day 450.00

49 0124 Mason (brick layer) 2nd class day 400.00

50 0125 Mason (for plain stone work) 2nd class) day 375.00

51 0126 Mason ( for ornamental stone work) 1 st class day 500.00

52 0127 Driver ( for Road roller, Concrete mixer , Truck etc.,) day 400.00

53 0128 Mate day 300.00

54 0130 Mistry day 300.00

55 0131 Painter Class I day 400.00

56 0132 Rock Excavator day 300.00

57 0133 Rock Breaker day 300.00

58 0134 Rock driller day 300.00

59 0135 Stone Chiseller day 300.00

60 0139 Skilled Beldar ( for floor rubbing etc.,) day 280.00

61 0141 White washer day 325.00

62 0155 Mason (average) day 425.00

63 0156 Carpenter (average) day 425.00

64 0157 Operator (Pile / Special machine) day 350.00

65 0159 Skilled torch operator for laying tack day 350.00

66 0160 Electrician helper day 350.00

67 0163 Mehanic helper each 350.00

68 0193 Electrician class I (ITI passed with wireman licence from competent authority) day 400.00

Puducherry Page 3


69 0191 Mazdoor category III day 250.00

70 0192 Painter Class II day 350.00

71 0158 Mechanic (Pile) day 350.00

72 0159 Electrician class II (ITI passed with licence from Elec.dept) day 350.00

73 0161 Mechanic Grade -I day 400.00

74 0162 Mechanic Grade -II day 350.00

75 0164 Pump driver Grade -I (ITI Passed) day 400.00

76 0165 Sewer Cleaner day 350.00

77 0166 Sweeper day 250.00

78 0167 Thatcher day 250.00

79 0168 Welder Class -I (ITI Passesd) day 350.00

80 0169 Welder Class -II day 300.00

81 0170 Well Sinker Class -I day 425.00

82 0171 Well Sinker Class -II day 325.00

83 0172 Technical Assitant Grade -I (B.E. Passed) day 600.00

84 0173 Technical Assitant Grade -II (Diploma passed or B.E. failed) day 550.00

85 0174 Technical Assitant Grade -III (ITI passed or Diploma failed) day 500.00

86 0175 Technical Assitant Grade -IV (ITI failed or having certificate issued by govt. of Puducherry) day 400.00

87 Data Entry Operator Gr.I (Degree with Computer / PGDCA or equivalent) day 550.00

88 0176 Laboratory Assistant Grade - I (PG in science) day 500.00

89 0177 Laboratory Assistant Grade - II (UG in science) day 450.00

90 0178Laboratory Assistant Grade - III (Degree other than Engg / Science to work as work inspector,Graduate Junior clerk and work clerk)

day 400.00

91 0179 Raker day 250.00

92 0180 Driver - Light vehicle day 350.00

Puducherry Page 4


93 0181 Driver - Heavy vehicle (Lorry , Roller , Tracer) day 400.00

94 0194 Driver - Earth moving equipments day 430.00

95 0182 Cleaner (Heavy vehicles / Roller) day 250.00

96 0183 Watchman Grade -I (Kurkha) day 300.00

97 0184 Watchman Grade -II (Others) day 275.00

98 0185 Drum mixer (Rotary for hot process) day 250.00

99 0186 Helper for Rig day 250.00

100 0200A Driller Grade -I (Pile) day 425.00

101 0200B Driller Grade -II (Pile) day 400.00

102 0200C Mazdoor (Heavy for Pile work) day 400.00

103 0200D Genset Operator day 275.00

104 0200E Site supervisor for pile operation day 525.00

Note: These rates are at site of work and are exclusive of contractors profit , but includes octroi , royalty , sales tax extra

MATERIALS FOR BUILDING WORK

105 0222 Seam bolts and nuts 6mm dia and 25mm long 10nos 30.00

106 0223 Non - asbestos fibre cement corrugated sheet 6mm thick sqm 205.00

107 0224 Non - asbestos fibre cement close fitting adjustable ridge metre 203.00

108 0225 Non - asbestos fibre cement corrugate serrated adjustable ridge metre 174.00

109 0226 Non - asbestos fibre cement plain wing adjustable ridge metre 188.00

110 0227 Non - asbestos fibre cement unserrated adjustable ridge for hips metre 195.00

111 0228 Non - asbestos fibre cement corrugated apron piece metre 126.00

112 0229 Non - asbestos fibre cement eaves filler piece each 93.00

113 0230 Non - asbestos fibre cement north light curves meter 197.00

114 0231 Non - asbestos fibre cement ventilator curves each 267.00

Puducherry Page 5


115 0232 Non - asbestos fibre cement barge boards metre 232.00

116 0233 Non - asbestos fibre cement ridge finial pair 84.00

117 0234 Non - asbestos fibre cement special north light curves each 275.00

118 0235 Non - asbestos fibre cement S type louvers each 161.00

119 0236 Non - asbestos multi purpose fibre cement board 6mm thick sqm 180.00

120 0237 Non - asbestos multi purpose fibre cement board 8mm thick sqm 239.00

121 0285 Brick aggregate (Single size) : 63 mm nominal size cum 375.00



124 0288 Brick aggregate (Single size) : 20 mm nominal size Cum 475.00

125 0289 Brick aggregate (single size) : 25mm nominal size cum 475.00

126 0291 Stone aggregate (Single size) : 63 mm nominal size cum 610.00





131 0296 Stone aggregate (Single size) : 12.5 mm nominal size cum 900.00



134 0300A Casurina posts 80mm dia metre 35.00

135 0300B Casurina posts 100mm dia metre 45.00

136 0300C Casurina posts 125mm dia metre 50.00

137 0302 Safeda ballies 125 mm diameter metre 50.00

138 0302A Casurina posts 100 to 130mm dia metre 47.00

Puducherry Page 6


139 0302B Casurina posts 150 mm dia metre 80.00

140 0304 Bajri cum 370.00

141 0305 Bamboo 25mm dia 2.5 metre long score 192.00

142 0308 Bhusa quintal 200.00

143 0309 Paving bitumen S-90 of approved quality tonne 36787.64

144 0310 Bitumen emulsion tonne 34371.77

145 0313 Blown type petroleum bitumen of penetration 85/25 of approved quality tonne 36787.64

146 0314 Bitumen hot sealing compound : grade A Kg 36.79

147 0316 Bitumen solution primer of approved quality litre 34.37

148 0318 Bitumen felt fibre (Vegetable or animal) : type 2 grade 1 sqm 48.00

149 0322 Biutmen felt : type 3 grade 1 sqm 48.00

150 0324 Coal tar litre 34.37

151 0325 Blasting Powder kg 30.00

152 0326 Blasting fuse (fuse wire) each 12.00

153 0328 White face insulating board :12 mm thick sqm 240.00

154 0332 Natural colour insulating board : 12mm thick sqm 180.00

155 0336 Flame retardent face insulating sqm 210.00

156 0339 Flame retardant face insulating,impregnated fibre board 12 mm thick sqm 320.00

157 0341 Flat pressed 3 layer particle board (medium density) grade 1-12 mm thick sqm 290.00

158 0346 Extra veneerede particle board :Teak veneeringononeside & commercialon other sqm 270.00

159 0347 Extra for veneered particle board with : Commercial veneering on both sides sqm 100.00

160 0348 Extra for veneered particle board with: Teak veneering on both sides sqm 460.00

161 0362 Brick bats cum 450.00

162 0367 Portland cement (OPC / PPC - Average) tonne 6000.00

Puducherry Page 7


163 0367A Cement (SRPC) tonne 6500.00

164 0368 White cement tonne 17000.00

165 0370 Coal (steam) quintal 950.00

166 0373 Cramp Gun metal 25x 6x300 mm each 55.00

167 0378 Brass butt hinges (light / ordinarytrype)125x70x4mm 10nos 1113.00

168 0379 Brass butt hinges (light / ordinarytype) 100x70x4mm 10nos 750.00

169 0380 Brass butt hinges (light / ordinarytype) 75x40x2.5mm 10nos 375.00

170 0381 Brass butt hinges (light / ordinarytype)50x40x2.5mm 10nos 223.00

171 0382 Brass butt hinges (heavy type) 125x85x5.5mm (.70kg) 10nos 1813.00

172 0383 Brass butt hinges (heavy type) 100x85x5.5mm (.56kg) 10nos 1638.00

173 0384 Brass butt hinges (heavy type)75x65x4.0mm (.20kg) 10nos 825.00

174 0385 Brass parliamentary hinges 150x125x27x5mm 10nos 2525.00



177 0388 Brass parliamentary hinges 75X100X20X3.2mm 10nos 1813.00

178 0389 Brass single acting spring hinges 150 mm each 260.00



181 0392 Brass double acting spring hinges 150 mm each 424.00



184 0400 Brass tower bolt (barrel type) 250x10 mm each 268.00



Puducherry Page 8



188 0404 Brass flush bolt 250 mm each 158.00



191 0408 Brass handles 125 mm with plate 175x32 mm each 166.00



194 0411 Brass door latch 300x16x5 mm (0.380 kg) each 211.00

195 0412 Brass door latch 250x16x5 mm (0.350 kg) each 189.00

196 0413 Brass mortice latch and lock 100x65 6levers pair of brass lever handles each 794.00

197 0414 Brass mortice latch and lock 100x65mm pair of brass lever handles each 675.00

198 0415 65mm Godrej Navtal locks - 6 levers each 300.00

199 0417 Brass 150 mm floor door stopper (0.357kg) each 194.00

200 0418 Brass hard drawn hooks and eyes 300 mm 10 Nos 600.00





205 0423 Brass casement window fastener each 52.00

206 0424 Brass casement stays (straight peg type) 300mm weighing not less than 0.33kg each 113.00



209 0427 Brass quadrant stays 300 mm each 96.00

210 0428 Brass fanlight catch 10 nos 344.00

Puducherry Page 9


211 0429 Brass fan light pivot 10 nos 463.00

212 0430 Brass chain with hook for fan light catch each 38.00

213 0431 Brass hasps and staples (safety type) 150mm 10 Nos 750.00



216 0438 Brass night latch each 756.00

217 0442 Brass helical spring 150mm each 227.00

218 0444 Brass curtain rod 20mm dia 1.25mm thick metre 135.00

219 0445 Brass curtain rod 25mm dia 1.25mm thick metre 181.00

220 0446 Brass brackets (curtain rods ) 20mm each 44.00

221 0447 Brass cupboard knob or ward robe knob 50 mm each 38.00

222 0449 Brass screws 50 mm 100 Nos 338.00





227 0524 Chromium plated brass butt hinges (heavy) type 75x65x4mm (200gms) 10 Nos 825.00

228 0525 Chromium plated brass butt hinges (light / ordinary) type 125x70x4mm 10 Nos 908.00

229 0526 Chromium plated brass butt hinges (light / ordinary) type 100x70x4mm 10 Nos 756.00

230 0527 Chromium plated brass butt hinges (light / ordinary) type 75x40x2.5mm 10 Nos 371.00

231 0528 Chromium plated brass butt hinges (light / ordinary) type 50x40x2.5mm 10 Nos 303.00

232 0555 Chromium plated brass handles 125mm with plate 175 x 32 mm each 227.00

233 0556 Chromium plated brass handles 100mm with plate 150 x 32 mm each 188.00

234 0557 Chromium plated brass handles 75 mm with plate 125x32 mm each 142.00

Puducherry Page 10


235 0558 Chr. plated brass mortice latch&lock100x65mm with6levers&apair brasslever handle each 713.00

236 0568 Chr. plated brass casement window fastener each 90.00

237 0569 Chr. plated brass casement stays(st.peg type)300mm weighing not less than 0.33kg each 144.00



240 0583 Chromium plated Brass night latch each 614.00

241 0584 Chromium plated Brass Wardrobe knob 50mm each 44.00

242 0585 Chromium plated Brass screws 50mm 100nos 288.00





247 0590 Chromium plated brass curtain rod 12mm dia 1.25mm thick metre 166.00



250 0594 Bright finished or black enameled MS butt hinges 125x65x2.12mm 10nos 144.00

251 0595 Bright finished or black enameled MS butt hinges 100x58x1.90mm 10nos 114.00

252 0596 Bright finished or black enameled MS butt hinges 75x47x1.70mmm 10nos 78.00

253 0597 Bright finished or black enameled MS butt hinges 50x37x1.50mmm 10nos 60.00

254 0608 Nickel plated MS piano hinges 1mm tk35mm wide metre 29.00

255 0635 Bright finished or black enameled MS screws 50mm 100 Nos 66.00

256 0637 Bright finished or black enameled MS screws 40mm 100Nos 46.00

257 0638 Bright finished or black enameled MS screws 30mm 100 nos 38.00

258 0639 Bright finished or black enameled MS screws 25mm 100 nos 30.00

Puducherry Page 11


259 0640Bright finished or black enameled MS screws 20mm

0mm100 nos 23.00

260 0641 Bright finished or black enameled MS bolts&nuts 50x6mm each 6.00

261 0641R Bright finished or black enamaled powder coating bolts and nuts 50x6mm each 8.00

262 0642 Oxidised MS butt hinges 125x65x2.12mm 10nos 216.00

263 0642R Powder coating butt hinges125x65x2.12mm 10nos 300.00

264 0643 Butt hinges 100x58x1.90mm 10nos 156.00

265 0643R Powder coating butt hinges100x58x1.9mm 10nos 192.00



268 0645R Powder coating butt hinges 50x37x1.50mm 10nos 96.00

269 0646 Oxidised MS parliamentary hinges150x125x27x2.8mm 10nos 480.00

270 0646R Powder coating parliamentary hinges 150x125x27x2.8mm 10nos 1440.00

271 0647 Powder coating parliamentary hinges125x125x27x2.8mm 10nos 372.00


273 0648 Oxidised ms parliamentary hinges100x125x27x2.8mm 10nos 360.00


275 0649 Oxidised ms parliamentary hinges75x100x20x2.24mm 10nos 300.00


277 0650 Oxidised ms single acting spring hinges 150 mm each 90.00

278 0650R Powder coating single spring hinges 150mm each 252.00


280 0651R Powder coating ms single spring hinges 125mm each 216.00


282 0652R Powder coating single acting spring hinges 100mm each 162.00

Puducherry Page 12


283 0653 Oxidised ms double acting spring hinges 150 mm each 95.00

284 0653R Powder coating double acting spring hinges 150mm each 252.00





289 0656 Nickel plated ms piano hinges 1mm tk35mmwide metre 49.00

290 0660 Oxidised ms sliding door bolt 300x16mm each 76.00

291 0660R Powder coating sliding door bolt 300x16 mm each 180.00

292 0661 Oxidised ms sliding door bolt 250x16mm each 56.00

293 0661R Powder coating sliding door bolt 250x16 mm each 144.00

294 0662 Oxidised ms door latch 300x20x6mm each 42.00

295 0662R Powder coating door latch 300x20x6mm each 120.00

296 0663 Oxidised ms door latch 250x20x6mm each 36.00

297 0663R Powder coating latch 250x20x6mm each 108.00

298 0664 Oxidised mild steel tower bolt (barrel type) 250X10mm each 50.00

299 0664R Powder coating tower bolt(barrel type) 250x10 mm each 60.00


301 0665R Powder coating tower bolt (barrel type) 200x10mm each 51.00


303 0666R Powder coating tower bolt (barrel type)150x10mm each 42.00


305 0667R Powder coating tower bolt (barrel type) 100x10mm each 36.00

306 0668 Oxidised mild steel handles 125 mm each 29.00

Puducherry Page 13


307 0668R Powder coating handles 125mm each 90.00


309 0669R Powder coating handles100mm each 66.00


311 0670R Powder coating handles 75mm each 47.00

312 0679 Oxidised MS hasps and staples (safety type) 150 mm 10 nos 216.00

313 0679R Powder coating hasps and staples (safety type) 150mm 10nos 60.00


315 0680R Powder coating hasps and staples (safety type)115mm 10nos 54.00


317 0681R Powder coating hasps and staples (safety type)90mm 10nos 47.00

318 0682 Oxidised MS screws 50mm 100nos 72.00

319 0682R Powder coating screws 50mm 100nos 144.00

320 0683 Screws 40mm 100nos 61.00








328 0687 Anodised aluminium butt hinges 125x75x4mm 10nos 759.00



Puducherry Page 14


331 0690 Anodised aluminium butt hinges 100x63x3.2mm 10nos 546.00





336 0696 Anodised aluminium sliding door bolt 300x16mm each 228.00

337 0697 Anodised aluminium sliding door bolt 250x16mm each 208.00

338 0698 Anodised aluminium tower bolt (barrel type)300x10mm 10nos 966.00

339 0699 Anodised aluminium tower bolt (barrel type) 250x10mm 10nos 897.00




343 0703 Anodised aluminium handles125mm with plate 175 x 32mm 10nos 477.00

344 0704 Anodised aluminium handles100mm with plate 150 x 32mm 10nos 414.00

345 0705 Anodised aluminium handles 75mm with plate 125 x 32mm 10nos 348.00

346 0706 Anodised aluminium handles 50 cm long 100x3.15mm each 144.00

347 0713 Block board construction flush door with teak wood ply on both faces 35mm tk sqm 1700.00



350 0717 Block board construction flush door with commercial ply on both faces 35mm tk sqm 1300.00



353 0723E P/F 20mm thick PVC shutter for doors, windows, cup board etc sqm 2100.00

354 0723F P/F PVC false roofing with Sintex PVC Section sqm 800.00

Puducherry Page 15


355 0724 S/F Precast RCC door and window frames sqm 850.00

356 0752 Block board construction flush door lipping sqm-door area 350.00

357 0753 Square vision panel in block board construction flush door sqm-door area 110.00

358 0754 Circular vision panel in block board construction flush door sqm-door area 105.00

359 0755 Decorative type louvers in block board construction flush door sqm-door area 190.00

360 0757 Rebate cutting in block board construction flush door sqm-door area 45.00

361 0759 Decorative plywood 4 mm sqm 525.00

362 0761 Fuel wood quintal 240.00

363 0763 Glue kg 80.00

364 0768 Cement concrete Jali 50mm tk sqm 375.00

365 0769 Cement concrete Jali 40mm tk sqm 320.00

366 0770 Cement concrete jali 25mm tk sqm 280.00

367 0771 Kerosene oil litre 25.00

368 0773 Unslaked lime quintal 325.00

369 0775 White lime quintal 400.00

370 0776 Lime quintal 270.00

371 0777 Dry hydrated lime (factory made) quintal 1000.00

372 0784 Marble dust / powder cum 1650.00

373 0785 Marble chips up to 4mm and downsize white&black quintal 125.00

374 0788 Marble chips large size above 4mm white&black quital 125.00

375 0810 Moorum cum 400.00

376 0810A Gravel cum 400.00

377 0811 Mud (dry) cum 15.00

378 0815 Dry distemper kg 55.00

Puducherry Page 16


379 0816 Oil bound washable distemper / Acrylic distemper kg 70.00

380 0818 Linseed oil (double boiled) litre 190.00

381 0820 Cement primer litre 120.00

382 0821 Distemper primer litre 120.00

383 0823 Pink primer (for wood) litre 120.00

384 0826 Aluminium paint litre 215.00

385 0827 Acid proof paint (chocolate or black) litre 245.00

386 0828 Anticorrosive bituminous paint (black) litre 140.00

387 0828A Black board paint litre 163.00

388 0829 Black japan paint litre 95.00

389 0830 Enamel paint litre 175.00

390 0831 Floor enamel paint in all shades except green litre 175.00

391 0833 Synthetic enamel paint in black or chocolate shade litre 175.00

392 0834 Synthetic enamel paint in all shades except black or chocolate shade litre 175.00

393 0835 Plastic emulsion paint litre 220.00

394 0835A Plastic emulsion paint (royal) litre 325.00

395 0835B Plastic emulsion paint (premium) litre 270.00

396 0835C Plastic emulsion paint (commercial) litre 220.00

397 0840 Paints - Ready mixed for steel work in white litre 170.00

398 0842 Paints - Ready mixed for wood work litre 170.00

399 0845 Roofing paint for iron sheets in red colour litre 175.00

400 0846 Set release of Don & Rebol emulsion Fosroc - mixed with 5litres of water litre 195.00

401 0850 White lead kg 75.00

402 0851 Water proofing cement paint kg 50.00

Puducherry Page 17


403 0855 Wax polish (ready made) kg 250.00

404 0856 Ordinary varnish litre 130.00

405 0857 Superior copal varnish litre 150.00

406 0858 Superior spar varnish litre 155.00

407 0859 Oil type wood preservative litre 110.00

408 0863 Putty for wood work kg 50.00

409 0865 Pig lead kg 150.00

410 0868 Premixed super white gypsum plaster kg 15.00

411 0869 Plaster of paris kg 15.00

412 0869A Ready made wall putty (JK / BIRLA ) kg 28.00

413 0870 Plug each 12.00

414 0873 Copper pins 6mm dia 7.5cm long each 12.00

415 0874 Black colour dark shade pigment kg 65.00

416 0875 Red,chocolate,orange,buff or yellow (red oxide of iron) light shade pigment kg 100.00

417 0876 Green or blue medium shade pigment kg 90.00

418 0886 Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia each 32.00

419 0966 Sand cast iron plain shoe 150mm dia each 200.00

420 0967 Copper plate kg 200.00

421 0969 Pulley 25 mm dia each 18.00

422 0973 Rolling shutter made of 80x1.25mm machine rolled laths sqm 2300.00

423 0974 Top cover for rolling shutters metre 550.00

424 0975 27.5cm long wire spring grade no 2 for rolling shutters each 500.00

425 0976 Ball bearing for rolling shutters each 260.00

426 0977 Extra for chain & cranked rolling shutters-exceeding 10sqmupto16.80sqmareaofdoor sqm 310.00

Puducherry Page 18


427 0978 Extra for chain & cranked rolling shutters-exceeding 16.80sqmarea of door sqm 360.00

428 0979 Cost of earth cum 190.00

429 0979A Quary rubbish cum 500.00

430 0979B Earth for filling (Red earth) cum 300.00

431 0980 Cost of sludge cum 30.00

432 0982 Coarse sand (Zone III) cum 925.00

433 0983 Fine sand (Zone IV) cum 975.00

434 0992 Galvanised steel plain sheets quintal 5000.00

435 0992A P/F colour coated galvalume sheet of 550 M.P.A sqm 700.00

436 0993C P/S/F of netlon mesh using 25mm an.al.strip sqm 270.00

437 0994 Standard quality hard board sheet 3mm tk sqm 150.00

438 0996 Standard quality hard board sheet 4.5 mm tk sqm 170.00

439 0999 Shellac litre 215.00

440 1000 Spirit litre 30.00

441 1001 Spun yarn kg 75.00

442 1002 MS round bar 12mm dia and below quintal 4300.00

443 1003 MS round bar above 12mm dia quintal 4300.00

444 1004 Av. rate of MS round bar for reinforcements quintal 4300.00

445 1005 Twisted steel / deformed bars quintal 4300.00

446 1005A Steel-TMT (TISCON / VIZAG / IISCO /SAIL / JSW) quintal 4800.00

447 1005B Steel-TMT (ISI BRAND OF APPROVED MAKE) quintal 4300.00

448 1005C Anticorrosive coating for 20mm to 32mm dia bar tonne 8370.00

449 1005D Anticorrosive coating for 10mm to 16mm dia bar tonne 11790.00

450 1005F Surface preparation and application of two coat of Zinga sqm 1452.60

Puducherry Page 19


451 1005G Providing corrosion proof zinga coating 8mm - 32mm dia bars tonne 15000.00

452 1006 Mild steel square bars quintal 4300.00

453 1007 Structural steel such as tees,angles channels and R.S.joists quintal 4200.00

454 1008 Flats upto 10mm in thickness quintal 4200.00

455 1009 Flats exceeding 10mm in thickness quintal 4250.00

456 1010 Mild steel plates quintal 5000.00

457 1013 Mild steel sheets for tanks quintal 4000.00

458 1015 Mild steel expanded metal 20x60 mm strands sqm 270.00

459 1019 Mild steel hooks each 6.00

460 1020 Mild steel rivets quital 4500.00

461 1021 Hard drawn steel wire fabric sqm 350.00

462 1022 GS bolts & nuts 6mm dia & 25mm long round head with slots 10nos 11.00

463 1023 GS J or L hooks 8mm dia 10nos 50.00

464 1024 GS bolts & nuts 6mm dia & 125mm long round head with slots each 11.00

465 1025 MS bolts 6mm dia and 25mm long with hexagonal head 10nos 17.00

466 1028 Straining bolts each 40.00

467 1029 GS barbed wire quintal 6000.00

468 1030 GS turn buckles each 10.00

469 1031 GS bolts & nuts 10mm dia and 27cm long both sides threaded with 4GS nuts each 13.00

470 1032 GS bolts 10mm dia & 7cmlongwith nuts each 9.00

471 1034 Bolts and nuts upto 300 mm in length quintal 5550.00

472 1035 Bolts and nuts above 300 mm in length quintal 5045.00

473 1036 Iron pintels including welded pin each 32.00

474 1037S AISI 316G 50mm S.S.pipe 10mtr or 32.5 or 25kgx400 LS 10000.00

Puducherry Page 20


475 1038S 25mm SS pipe 4 cross line 40mtr or 130' or 50kg x400 LS 20000.00

476 1039S Vertical 40mm x10mmx1mtr height 17no.or 55kg x400 LS 22000.00

477 1040S S.S Slant holes over vertical post, each 4 holes , total holes 68nox50.00 LS 3400.00

478 1041S S.S.Base plate of 100mmx100x9mm of each 1 kg,17 pipes or 17kgx300 LS 5100.00

479 1042S S.S.M9 holes over base plate, total 17 plates , 68 holes x40.00 LS 2720.00

480 1043S S.S. M8 Anchor fastener bolt & 60no x50.00 LS 3400.00

481 1044L For10mtr,charges cutting ,TIG welding, mirror polishing inclu.transportationet LS 26650.00

482 10A UNLOADING-100mm dia metre 0.63

483 10B UNLOADING-125mm dia metre 0.84

484 10C UNLOADING-150mm dia metre 1.05

485 10D UNLOADING-200mm dia metre 1.70

486 10E UNLOADING-250mm dia metre 2.42

487 10F UNLOADING-300mm dia metre 2.99

488 10G UNLOADING-350mm dia metre 3.54

489 10H UNLOADING-400mm dia metre 5.71

490 10I UNLOADING-450 to 500mm dia metre 6.98

491 10J UNLOADING-600 to 1000mm dia metre 10.47

492 10K Unloading below 100mm dia metre 0.53

493 1143 Steel beading metre 38.00

494 1145 Aluminium plain strip edging 38x12x3mm metre 85.00

495 1149 Glass strip 4mm thick 40mm deep metre 6.50

496 1154 Through and bond stone 100nos 900.00

497 1157 Stone for masonry work cum 800.00

498 1157A Jetty stone / Armour stone / core stone MT 370.00

Puducherry Page 21


499 1158 Stone for pitching 15cm x22.5cm cum 1000.00

500 1159 Stone dust cum 500.00

501 1159A Spalls (5 to 50 kg) cum 300.00

502 1159B Charcoal powder kg 27.50

503 1160 Red sand stone block cum 4500.00

504 1161 White sand stone block cum 5000.00

505 1163 White sand stone slab 75mm tk (un-dressed) sqm 325.00

506 1164 Red sand stone slab 40mm thick (un-dressed) sqm 170.00

507 1165 White sand stone slab 40mm thick (un-dressed) sqm 270.00

508 1166 Red sand stone slab 45mm and 50 mm thick (un-dressed) sqm 150.00

509 1168 Kota stone slab 20mm to 25mm thick(semi-polished) sqm 425.00

510 1169 Kota stone slab 25mm thick (rough chiseled) sqm 475.00

511 1174 Red sand stone slab 45mm and 50mm thick(un-dressed) sqm 220.00

512 1175 White sand stone slab 45mm and 50mm thick(un-dressed) sqm 240.00

513 1177 Stone grit 6mm and down size or pea sized gravel cum 650.00

514 1179 Crushed stone 2.36mm to 12.5mm size cum 633.33

515 1182 Surkhi cum 110.00

516 1189B Teak wood in scantling (Burma) cum 150000.00

517 1190B Teak wood in planks (Burma) cum 175000.00

518 1197P Country wood in scantling (Padak) cum 75000.00

519 1197V Country wood in scantling (Vengai) cum 70000.00

520 1198P Country wood in planks (Padak) cum 80000.00

521 1198V Country wood in planks(Vengai) cum 80000.00

522 1201 Precast terrazzo tiles 22mm thick(light shade) sqm 275.00

Puducherry Page 22


523 1202 Precast terrazzo tiles 22mm thick(medium shade) sqm 215.00

524 1203 Precast terrazzo tiles 22mm thick(dark shade) sqm 200.00

525 1203A Cement concrete flooring tiles 22mm tk -(Endura/Ultra/Dazzle/Technic) sqm 400.00

526 1207 G.I.limpet washer 100nos 29.00

527 1208 Bitumen washer 100nos 23.00

528 1209 G.I.plain washer thick 100nos 35.00

529 1210 G.I.plain washer thin 100nos 30.00

530 1211 G.I.plain washer for seam bolts 100nos 21.00

531 1213 Water proofing materials kg 30.00

532 1214 Welding by gas plant cm 0.80

533 1215 Welding by electric plant cm 0.62

534 1216 Whiting quintal 620.00

535 1219 Wire nails kg 40.00

536 1220 Wire mesh (rabbit) sqm 62.00

537 1221 20mm dia holding down bolts quintal 4000.00

538 1222 Mild steel sheets with bolts and nuts to rest on pintels each 190.00

539 1224 Hard drawn steel wire quintal 4300.00

540 1225 Mild steel flat strap fitting quintal 4240.00

541 1227 Chequered terrazzo tiles 22mm thick (light shade) sqm 275.00

542 1228 Chequered terrazzo tiles 22mm thick (medium shade) sqm 230.00

543 1229 Chequered terrazzo tiles 22mm thick (dark shade) sqm 200.00

544 1234 Aluminium plain strip edging 57x12x3mm metre 120.00

545 1235 Diesel oil litre 42.65

546 1237 Cutting marble or sand stone slab upto 50mm tk by mechanical device metre 5.00

Puducherry Page 23


547 1241 Commercial LPG in cylinder kg 35.00

548 1257C Thermocoal plain sheet - 19mm thick sqm 40.00

549 1301 Bleaching powder quintal 3100.00

550 1304 Surface box for stop cock each 74.00

551 1305 Surface box for sluice valve each 148.00

552 1307 Surface box for water meter each 258.00

553 1309 C.I.bracket for washbasin and sinks pair 71.00

554 1314 C.P.brass chain with 32mm dia rubber plug each 188.00

555 1315 C.P.brass chain with 40mm dia rubber plug each 213.00

556 1330 Clamps and M.S.stays including bolts and nuts for 100mm pipe each 24.00

557 1331 M.S.holder bat clamp of approved design for 100mm S.C.I.pipe each 23.00

558 1332 M.S.holder bat clamp of approved design for 75mm S.C.I.pipe each 11.00



561 1336 Clearing eye with chain and lid 100mm dia each 42.00

562 1337 Clearing eye with chain and lid 150mm dia each 48.00

563 1339 Brass bib -cock 15mm dia each 194.00

564 1340 Brass bib-cock 20mm dia each 225.00

565 1342 Brass stop-cock 15mm dia each 231.00

566 1343 Brass stop-cock 20mm dia each 281.00

567 1350 Mosquito proof coupling of approved design each 40.00

568 1352 C.I.cover and frame 300x300 mm inside each 295.00

569 1353 C.I.cover without frame 300x300mm inside i/c cover of 4.50kg each 300.00

570 1354 Rectangular cover 455x610mm with frame (low duty) each 1050.00

Puducherry Page 24


571 1355 Rectangular cover 455x610mm without frame (low duty) each 450.00

572 1356 500mm dia cover with frame (medium duty) each 1400.00

573 1357 500mm dia cover without frame (medium duty) each 1000.00

574 1358 DI manhole cover- 560mm dia circular hinged cover with square frame.( Not less each 6656.00

575 1358A DI manhole cover- 560mm dia circular hinged cover with square frame.( Not less each 7488.00

576 1359 DI Rectangular IC Cover 450x600mm Rectangular Hinged cover with frame.(Not less each 5824.00

577 1360 C.I.mouth,brass ferrule 15 mm dia each 150.00


579 1361A Precast concrete manhole cover- 600mm dia circular cover with frame.( Not less each 2572.50


581 1362A Precast concrete manhole cover- 560mm dia circular cover with frame.( Not less each 1898.75

582 1363 Vitreous china foot rests 250x130x30 mm pair 82.00

583 1363A Precast concrete rectangular cover 450x600mm Rectangular cover with frame.(Not each 2511.25

584 1364 C.I grating 100x100 mm each 15.00

585 1364A Precast concrete rectangular cover 450x600mm Rectangular cover with frame.(Not each 1286.25

586 1365 C.I.grating 150x100mm each 19.00

587 1366 C.I grating 150x150 mm each 25.00

588 1367 C.I.grating 180x180mm each 28.00

589 1369 S.C.I.gully or nahani grating 100mm dia each 13.00

590 1371 Hydrant (FIRE) 2 Kg each 1600.00

591 1371A Hydrant (FIRE) 4.5 Kg each 2400.00

592 1372A 65mm dia (Rubber insertion for flanged pippe joints) each 24.00

593 1372B 80mm dia (Rubber insertion for flanged pippe joints) each 25.00

594 1372C 100mm dia (Rubber insertion for flanged pippe joints) each 30.00

Puducherry Page 25


595 1372D 125mm dia (Rubber insertion for flanged pippe joints) each 51.00

596 1372E 150mm dia (Rubber insertion for flanged pippe joints) each 53.00

597 1372F 200mm dia (Rubber insertion for flanged pippe joints) each 77.00

598 1372G 250mm dia (Rubber insertion for flanged pippe joints) each 152.00

599 1372H 300mm dia (Rubber insertion for flanged pippe joints) each 181.00

600 1372I 350mm dia (Rubber insertion for flanged pippe joints) each 319.00

601 1372J 400mm dia (Rubber insertion for flanged pippe joints) each 360.00

602 1372K 450mm dia(Rubber insertion for flanged pippe joints) each 521.00

603 1372L 500mm dia (Rubber insertion for flanged pippe joints) each 627.00

604 1372M 600mm dia (Rubber insertion for flanged pippe joints) each 799.00

605 1372N 700mm dia (Rubber insertion for flanged pippe joints) each 1043.00

606 1372O 750mm dia (Rubber insertion for flanged pippe joints) each 2218.00

607 1372P 800mm dia (Rubber insertion for flanged pippe joints) each 2541.00

608 1372Q 900mm dia (Rubber insertion for flanged pippe joints) each 2831.00

609 1372R 1000mm dia (Rubber insertion for flanged pippe joints) each 3696.00

610 1373 Rubber insertions for 80mm dia pipe joints each 20.00

611 1373A 80mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 45.00

612 1373B 100mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 51.00

613 1373C 150mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 73.00

614 1373D 200mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 111.00

615 1373E 250mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 156.00

616 1373F 300mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 209.00

617 1373G 350mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 243.00

618 1373H 400mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 337.00

Puducherry Page 26


619 1373I 450mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 376.00

620 1373J 500mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 499.00

621 1373K 600mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 636.00

622 1373L 700mm Dia( Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 917.00

623 1373M 750mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 1056.00

624 1373N 800mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 1201.00

625 1373O 900mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 1333.00

626 1373P 1000mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 1736.00


628 1374A 80mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 55.00

629 1374B 100mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 65.00

630 1374C 150mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 92.00

631 1374D 200mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 145.00

632 1374E 250mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 203.00

633 1374F 300mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 273.00

634 1374G 350mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 314.00

635 1374H 400mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 434.00

636 1374I 450mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 488.00

637 1374J 500mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 640.00

638 1374K 600mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 825.00

639 1374L 700mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 1173.00

640 1374M 750mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 1377.00

641 1374N 800mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 1506.00

642 1374O 900mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 1657.00

Puducherry Page 27


643 1374P 1000mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 2178.00











654 1392 Mirror of superior make glass 60x45cm each 460.00

655 1395 Juteyarn kg 55.00

656 1396 Vitreous china pedestal for wash basin each 920.00

657 1397 Pig lead kg 200.00

658 1398 "L" Clamp 30 cm long (12mm Dia) no 60.00

659 1399 Hire charge for pipe cutting machine day 200.00

660 1400AA Hire charge for pipe grinding machine day 200.00

661 1401 G.I Waste Not Tap -15mm(ALTO/GIFVAL) each 90.00

662 1401A G.I Waste Not Tap -20mm(ALTO/GIFVAL) each 140.00

663 1402 Brass Bib cock-20mm each 120.00

664 1464 S&S.C.I.standard specials upto 300mm dia (heavy class) quintal 4800.00

665 1466 S&S.C.I.standard specials over 300mm dia (heavy class) quintal 5100.00

666 1468 Flanged C.I.standard specials upto 300mm dia (heavy class) quintal 5200.00

Puducherry Page 28


667 1470 Flanged C.I.standard specials over 300mm dia (heavy class) quintal 5350.00

668 1472 Casing pipe 100 mm dia metre 450.00

669 1532 Flush pipe with union spreaders and clamps all in C.P.brass for single stall each 250.00

670 1533 Flush pipe with union spreaders and clamps all in C.P.brass for double stall each 425.00

671 1534 Flush pipe with union spreaders and clamps all in C.P.brass forrangof threestall each 515.00

672 1535 Flush pipe with union spreaders and clamps all in C.P.brass forrangof fourstall each 600.00

673 1540 Flush pipe and spreaders G.I.for single set of one squatting plate urinal each 300.00

674 1541 Flush pipe and spreaders G.I.for single set of two squatting plate urinal each 275.00

675 1542 Flush pipe and spreaders G.I.for single set of three squatting plate urinal each 340.00

676 1543 Flush pipe and spreaders G.I.for single set of four squatting plate urinal each 415.00

677 1545 G.I.pipes 15mm dia metre 130.00

678 1545P 15mm dia - G.I. pipe (medium) - IS-1239 (TATA,TNT,NEZONE, APOLLO, ZENITH metre 150.80













Puducherry Page 29




693 1555 G.I.back (jam)nuts 25mm dia each 20.00

694 1555A Water meter standard quality (Ataris) each 1200.00

695 1559 G.I.back (jam)nuts 65mm dia each 38.00

696 1559A 25 mm X 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 38.00

697 1559AA 150 mm x 80 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1770.00

698 1559AB 150 mm x 100 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1770.00

699 1559AC 150 mm x 125 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1770.00

700 1559B 32 mm x 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 51.00

701 1559C 32 mm x 25 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 51.00

702 1559D 40 mm x 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 63.00

703 1559D1 40 mm x 25 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 63.00

704 1559E 40 mm x 32 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 63.00

705 1559F 50 mm x 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 91.00

706 1559F1 50 mm x 25 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 91.00

707 1559G 50 mm x 32 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 91.00

708 1559H 50 mm x 40 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 91.00

709 1559I 65 mm x 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

710 1559I1 65 mm x 25 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

711 1559J 65 mm x 32 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

712 1559K 65 mm x 40 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

713 1559L 65 mm x 50 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

714 1559M 80 mm x 32 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 222.00

Puducherry Page 30


715 1559N 80 mm x 40 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 222.00

716 1559O 80 mm x 50 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 222.00

717 1559P 80 mm x 65 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 222.00

718 1559Q 100 mm x 40 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 344.00

719 1559R 100 mm x 50 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 344.00

720 1559S 100 mm x 65 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 344.00

721 1559T 100 mm x 80 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 344.00

722 1559U 125 mm x 50 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1310.00

723 1559V 125 mm x 65 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1310.00

724 1559W 125 mm x 80 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1310.00

725 1559X 125 mm x 100 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1310.00

726 1559Y 150 mm x 50 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1770.00

727 1559Z 150 mm x 65 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1770.00

728 1560 15 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 25.00

729 1560A 20 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 33.00

730 1560B 25 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 46.00

731 1560C 32 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 67.00

732 1560D 40 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 89.00

733 1560E 50 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 126.00

734 1560F 65 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 231.00

735 1560G 80 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 308.00

736 1560H 100 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 567.00

737 1560I 125 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1910.00

738 1560J 150 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 2325.00

Puducherry Page 31


739 1561A 25 mm X 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 46.00

740 1561AA 150 mm x 80 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 2375.00

741 1561AB 150 mm x 100mm dia-GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 2380.00

742 1561AC 150 mm x 125mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 2390.00

743 1561B 32 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 68.00

744 1561C 32 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 68.00

745 1561D 40 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 89.00

746 1561D1 40 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 89.00

747 1561E 40 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 89.00

748 1561F 50 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 126.00

749 1561F1 50 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 126.00

750 1561G 50 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 126.00

751 1561H 50 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 126.00

752 1561I 65 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 241.00

753 1561I1 65 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 241.00

754 1561J 65 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 241.00

755 1561K 65 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 241.00

756 1561L 65 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 241.00

757 1561M 80 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 318.00

758 1561N 80 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 318.00

759 1561O 80 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 318.00

760 1561P 80 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 318.00

761 1561Q 100 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 577.00

762 1561R 100 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 577.00

Puducherry Page 32


763 1561S 100 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 577.00

764 1561T 100 mm x 80 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 577.00

765 1561U 125 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1896.00

766 1561V 125 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1910.00

767 1561W 125 mm x 80 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1950.00

768 1561X 125 mm x 100mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1950.00

769 1561Y 150 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 2365.00

770 1561Z 150 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 2370.00

771 1562A 15mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 26.50

772 1562B 20mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 34.00

773 1562C 25mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 46.00

774 1562D 32mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 69.00

775 1562E 40mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 82.00

776 1562F 50mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 118.00

777 1562G 65mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 218.00

778 1562H 80mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 350.00

779 1562I 100mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 590.00

780 1563A 15mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 35.00

781 1563B 20mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 50.00

782 1563C 25mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 70.00

783 1563D 32mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 85.00

784 1563E 40mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

785 1563F 50mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 175.00

786 1563G 65mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 255.00

Puducherry Page 33


787 1563H 80mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 390.00

788 1563I 100mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 690.00

789 1563J 125mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1100.00

790 1563K 150mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1600.00

791 1564A 15mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 24.00

792 1564B 20mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 31.00

793 1564C 25mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 37.00

794 1564D 32mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 51.00

795 1564E 40mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 62.00

796 1564F 50mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 91.00

797 1564G 65mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

798 1564H 80mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 222.00

799 1564I 100mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 354.00

800 1564J 125mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 600.00

801 1564K 150mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 700.00

802 1565A 15 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 15.00

803 1565B 20 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 20.00

804 1565C 25 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 25.00

805 1565D 32 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 30.00

806 1565E 40 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 35.00

807 1565F 50 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 50.00

808 1565G 65 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 70.00

809 1565H 80 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 85.00

810 1565I 100 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 110.00

Puducherry Page 34


811 1565J 125 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 210.00

812 1565K 150 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 350.00

813 1566A 15mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 15.00

814 1566B 20mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 20.00

815 1566C 25mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 28.00

816 1566D 32mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 35.00

817 1566E 40mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 45.00

818 1566F 50mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 55.00

819 1566G 65mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 80.00

820 1566H 80mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 95.00

821 1566I 100mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 120.00

822 1566J 125mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 235.00

823 1566K 150mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 335.00

824 1567A 15 mm dia - GI Pipe Nipple 10cm long each 27.00

825 1567B 20 mm dia - GI Pipe Nipple 10cm long each 31.00

826 1567B1 25 mm dia - GI Pipe Nipple 10cm long each 41.00

827 1567C 32 mm dia - GI Pipe Nipple 10cm long each 44.00

828 1567D 40 mm dia - GI Pipe Nipple 10cm long each 50.00

829 1567E 50 mm dia - GI Pipe Nipple 10cm long each 65.00

830 1567F 65 mm dia - GI Pipe Nipple 10cm long each 87.00

831 1567G 80 mm dia - GI Pipe Nipple 10cm long each 113.00

832 1567H 100 mm dia - GI Pipe Nipple 10cm long each 150.00

833 1567I 125 mm dia - GI Pipe Nipple 10cm long each 185.00

834 1567J 150 mm dia - GI Pipe Nipple 10cm long each 250.00

Puducherry Page 35


























Puducherry Page 36











868 1571A Ferrule-15mm - (IS-2692) each 200.00

869 1571B Ferrule-20mm - (IS-2692) each 250.00

870 1571C Ferrule-25mm - (IS-2692) each 350.00

871 1572A Mild steel bracket 40 mm x 20 mm each 110.00

872 1572AA Mild steel bracket 200 mm x 100 mm each 450.00

873 1572AB Mild steel bracket 200 mm x 125 mm each 450.00

874 1572AB1 Mild steel bracket 250 X 20 no 450.00



877 1572AC Mild steel bracket 250 mm x 65 mm each 500.00

878 1572AD Mild steel bracket 250 mm x 80 mm each 500.00

879 1572AE Mild steel bracket 250 mm x 100 mm each 500.00

880 1572AF Mild steel bracket 250 mm x 125 mm each 500.00

Documents

PUDUCHERRY SCHEDULE OF RATES - ponpwd.puducherry.gov.in/document/PSR_Puducherry_2011_12.pdf · The Puducherry Schedule of Rates 2011-12 incorporates all the items ... But this PSR