DownloadsPUDLO CEMENT WATERPROOFING POWDERA multi-component, single pack, waterproofing, plasticising, permeability reducing, corrosion inhibiting admixture. Outperforms any other admixture of its kind.

hDB WATERSTOPhDB WATERSTOP is a Hydrophilic Polyacrylate Elastomeric (swellable rubber) type waterstop. Designed for the integral sealing of construction joints in cast-in place concrete. hDB WATERSTOP expands upon contact with water to form a positive seal even in saline conditions.

INSTAFLEX PU25 MASTICA high performance polyurethane single pack, multi-purpose sealant. It is a one part, moisture curing, non-sag elastomeric sealant formulated to provide low skin formation and fast cure.

INSTACEM Concrete Repair SystemA specially formulated, pre-mixed cementitious concrete powder. The material mixes readily with water to produce a non-shrink, water-resistant repair material that hardens to give a high strength product.

INSTACEM Primer LatexA blend of acrylic polymer resins. The latex is applied to previously prepared substrate concrete, blockwork, brickwork, masonry or render before the application of INSTACEM Special Concrete Products.

INSTASWELL MasticA one component, polyurethane based, solvent free, hydro swelling mastic, supplied in cartridges and aluminium cartridges, for the sealing of construction joints.

INSTALASTICA liquid-applied, seamless, waterproof coating for water retaining structures, submerged tunnels, diaphragm walls, bridge deck waterproofing and a wide variety of extreme service class concrete structures to provide long service life, anti-carbonation, waterproof construction.

PUDLO SC waterproofing admixture for self-compacting concretePUDLO Self-Compacting Admixture (PUDLO SC) is an extended Admixture specifically designed and manufactured to produce exceptionally flowing concretes, without segregation in Self-compacting Concrete. Combining all the benefits of ultra-low

permeability and fine surface finish already achieved using PUDLO CWP for over 100 years, PUDLO SC will give consistent high workability and ease of use when placing Self-compacting Concrete.

INSTAPRUF SELF SMOOTHING FLOOR-TOPPINGINSTAPRUF is a two pack, polymer modified, cementitious based, water resistant, hard wearing, self-smoothing seamless floor topping.

INSTACEM POLYMER WALL RENDER AND POINTING INSTACEM Waterproof Render/ Mortar is a polymer modified, cementitious mortar/plaster specifically designed to produce a nonshrink, weather resistant, high strength wall render/repair and pointing material. INSTACEM Waterproof Render is factory made to BS EN ISO 9001:2000 is user friendly (just add water) and contains no toxic or harmful chemicals.

INSTACEM POLYMER FLOOR SCREEDA Polymer Floor Screed is a polymer modified, cement based screed specifically designed to produce a non-shrink, weather resistant, micro fibre reinforced, high strength flooring product. INSTACEM Polymer Floor Screed is factory made to BS EN ISO 9001:2000 is user friendly (just add water) and contains no toxic or harmful chemicals.DB 7 STAR HIGH FLOW GROUTDB 7 Star High Flow Grout is a non shrink, very high strength cementitious grout comprising of low alkali high specific area Portland cements and other cementitious binders and a system of compatible admixtures to achieve high in service performance.INSTACEM Mortar Underwater PowderA blend of special cement powders, high quality graded silica sand, and a unique combination of polymers and admixtures. When mixed with water the powder produces a mortar with a putty consistency which is wash-out resistant and waterproof. The material develops an early gain in strength and can be used above or below the waterline.INSTACEM P Protective coatingA high performance, acrylic based, hard wearing, copolymer protective coating for concrete. INSTACEM P is designed is to enhance the appearance of and protect atmospherically exposed concrete structures from aggressive elements, weathering and rain.

INSTACEM P is suitable for all types of concrete structures including those exposed to harsh marine environments. INSTACEM P is a component of the David Ball Group’s INSTACEM system for concrete repair and protection.