PUBLIC/NON-CONFIDENTIAL COPPER PIPE FITTINGS · PDF filePUBLIC/NON-CONFIDENTIAL COPPER PIPE FITTINGS RR-2015-003 PRODUCER'S QUESTIONNAIRE INTRODUCTION ... "4 cast drainage lead 8 oz

PUBLIC/NON-CONFIDENTIAL COPPER PIPE FITTINGSRR-2015-003

PRODUCER'S QUESTIONNAIRE

INTRODUCTION

The information requested in this questionnaire is for use by the Canadian International Trade Tribunal (the Tribunal) in connection with itsexpiry review respecting the dumping of solder joint pressure pipe fittings and solder joint drainage, waste and vent pipe fittings, made of castcopper alloy, wrought copper alloy or wrought copper, for use in heating, plumbing, air conditioning and refrigeration applications, restrictedto the products enumerated in the "Products Covered" tab, originating in or exported from the United States of America (United States), theRepublic of Korea (Korea) and the People’s Republic of China (China) and the subsidizing of copper pipe fittings originating in or exported fromChina.

The information is requested pursuant to subsection 17(2) of the Canadian International Trade Tribunal Act and is for use by the Tribunal inconnection with the expiry review it initiated under section 76.03(3) of the Special Import Measures Act . The requested information is neededto supplement data available from other sources.

As a domestic producer of copper pipe fittings, you are required to complete this questionnaire. You may return your completedquestionnaire using one of the following methods, no later than August 11, 2016:

1. digital media (e.g. CD or DVD or USB key) sent to the Registrar, Canadian International Trade Tribunal, 333 Laurier Ave W, 15th Floor, Ottawa, Ontario K1A 0G7;

2. in hard copy sent to the Registrar, Canadian International Trade Tribunal, 333 Laurier Ave W, 15th Floor, Ottawa Ontario K1A 0G7;

3. by secure e-filing service (please visit: https://apps.citt-tcce.gc.ca/sftapp/CITT/html/transfer_e.html); or

4. by electronic mail to [email protected] if you accept the associated risks and are filing information that belongs to your firm only.

It is preferable to file an electronic version of your response to the questionnaire. Your completed questionnaire should be filed EITHER electronically OR in hard copy, but NOT BOTH.

In conducting this expiry review, the Tribunal is required to gather the best possible evidence. It is in your interest to ensure that yourresponse to this questionnaire is accurate, complete and to return it to the Tribunal by the due date.

Information that is confidential in nature will be treated in accordance with sections 43 to 49 of the Canadian International Trade TribunalAct , which require that such information shall not be made public in such a manner as to be available for the use of any business competitoror rival of the reporting person, firm or corporation.

If your firm did NOT produce or import from any subject or non-subject country copper pipe fittings as described in the yellow "Case Information" tab and listed in the yellow "Products Covered" tab, during the period of review (January 1, 2013, to March 31, 2016), please provide the information requested in the blue "Certification" tab. You DO NOT need to respond to the rest of the questionnaire.



PARTS OF THE QUESTIONNAIRE

TAB DESCRIPTION

Introduction Instructions on how to return questionnaire responses.

Index References to, and explanation of, different tabs in questionnaire.

General Instructions

Instructions regarding the composition of the questionnaire and completion guidance.

Case Information Information specific to this expiry review including product information, tariff classification, period of review, due date of completed questionnaire and contact information for trade remedies investigations officers assigned to this case.

Products Covered List of copper pipe fittings covered by the Tribunal’s orders made on February 17, 2012, in Expiry Review No. RR-2011-001, by product category and description.

Glossary Glossary of terms used in this questionnaire.

Part I - Public/Non-confidential Information (Blue Tabs)

Certification Sign-off sheet indicating your firm's activities during the period of review. This sheet, once completed, forms part of your firm's questionnaire response.

Public Information Public/non-confidential information to be provided by your firm.

Firm's Activities Schedule 1 - Firm's Activities During the period of review.

Public Info. Comments

Should your firm wish to add any comments related to public information, you may do so in this tab.

Part II - Confidential Information (Green Tabs)

Confidential Information

Confidential Information to be provided by your firm.

Domestic(Cat 1 - 4)

Schedule 2 - Inventories, Domestic Production and Sales of Domestically Produced Copper Pipe Fittings

Imports(Cat 1 - 4)

Schedules related to imports and sales of imports:Schedule 3 - Inventories, Imports and Sales of Imports of Copper Pipe Fittings

Capacity Schedule 4 - Total Practical Plant Capacity, Domestic Production and Capacity Utilization Rate for Copper Pipe Fittings and Other Products.

Employment Schedule 5 - Employment, Hours Worked and Wages Paid for Copper Pipe Fittings.

Total Firm Schedule 6 - Income Statement for Total Firm.

Financial Schedules related to financial information:Schedule 7 - Cost of Goods Manufactured for Domestically Produced Schedule 8 - Income Statement for Domestically Produced

Material Schedule 9 - Average Unit Costs of Major Material Components for Domestically Produced Copper Pipe Fittings

Investments Schedule 10 - Investments for Domestically Produced Copper Pipe Fittings.

Forecasts Schedule 11 - Forecasts for Domestic Sales Volumes, Import Volumes, Pricing, Net Margin and Average Costs

Confidential Info. Comments

Should your firm wish to add any comments related to Confidential Information, you may do so in this tab.

General Information (Yellow Tabs)



GENERAL INSTRUCTIONS

1. This questionnaire is divided into two parts:

PART I - deals with information that is public or non-confidential in nature. Requests to treat any of this information as confidential must be fully justified in writing and be accompanied by a redacted public or non-confidential version. PART I deals with general firm, industry data and product-specific information.

PART II - deals with information that is confidential in nature.

2. If your firm has more than one location, facility or outlet, please ensure that you submit to the Tribunal a consolidated reply to thequestionnaire.

3. If the answer to any question is “none,” “not applicable” or “not available,” please indicate which of these situations applies ratherthan leave the space blank.

4. All information is requested on a calendar-year basis. Where adjustments are required to comply with the Tribunal’s request, pleaseidentify the adjustments and give a full explanation of how they were made.

5. Unless otherwise specified, all responses to volume questions should be expressed in "pieces" and all responses to value questionsshould be expressed in Canadian dollars (CAD$).

6. If the information requested is not readily available from your records in exactly the form requested, please furnish preparedestimates, with a full explanation of the methodology used to prepare these estimates.

7. Comments or explanations with respect to any question should be made in the space provided or in a separate file submitted withyour response to the questionnaire.

8. Financial working papers should be stored in separate electronic files if an electronic version of the completed questionnaire is sent tothe Tribunal. Further explanations to supplement your answers should be stored and sent to the Tribunal as indicated in the yellow"Introduction" tab. If you are forwarding to the Tribunal a paper copy of the completed questionnaire, please also send a paper copy ofthe above-mentioned support documents. You must ensure that these documents are provided in a photocopy-ready format,unbound, in either English or French. Please note that ONLY the relevant pages that cover the goods in question should be submitted.

9. In order to assist respondents with the completion of the questionnaire, certain questions include pull down menus. These menus areactivated by clicking in the cell and then clicking on the arrow in the bottom right-hand corner.

10. In order to preserve formatting, when copying information into an existing cell, double click into the destination cell then paste thetext. PLEASE DO NOT EXCEED 1,000 CHARACTERS PER CELL. Should you need more space, please use the "Comments" sections.



CASE INFORMATION

PRODUCT DEFINITION

The goods subject to this expiry review are defined as:

Solder joint pressure pipe fittings and solder joint drainage, waste and vent pipe fittings, made of cast copper alloy, wrought copper alloy or wrought copper, for use in heating, plumbing, air conditioning and refrigeration applications, restricted to the products enumerated in the "Products Covered" tab, originating in or exported from the United States, Korea and China.

The following copper pipe fittings were excluded by the Tribunal in Inquiry No. NQ-2006-002, February 19, 2007, and are therefore not subject to this expiry review: "4 cast drainage lead 8 oz. closet flange" and "4 cast drainage 14 oz. lead closet flange".

ADDITIONAL PRODUCT INFORMATION

Copper pipe fittings are used to connect copper pipes, tubes or other fittings to one another. The methods of joining copper fittingsinclude soldering, silver brazing and epoxy or similar gluing techniques. The connections are made by fitting two pieces together andheating the ends of the tubing and fitting, and filling the gap between the two with melted solder which solidifies on cooling to form astrong, leak proof connection. The fittings can also be used to connect copper tubing to other metal systems by use of threadedfittings. However, at least one end of a fitting is always soldered. Finally, the connection can also be made using epoxy or similargluing methods.

Copper pipe pressure fittings may be used in conveying liquids (e.g. potable water), gases and air under pressure in residential,industrial, commercial and institutional buildings. Copper pipe pressure fittings are also used in a variety of air-conditioning andrefrigeration (ACR) applications. The types of fittings used in air conditioning applications are typically identified by reference to theiroutside diameters, whereas the same fittings used in non-air conditioning applications such as plumbing and heating are typicallyidentified by reference to their inside or “nominal” diameters. Apart from the reference to diameter, a fitting for an air conditioningapplication is the same as a fitting for a non-air conditioning application.

Copper pipe drainage, waste and vent (DWV) fittings are used primarily to convey waste from buildings to sewers and for ventingpurposes under low-pressure conditions.

Female and male adaptors are used to connect a copper tube to an iron pipe or a water heater. Other adapters include ferrules thatare used to join a copper tube to a cast-iron pipe in older installations. Bushings are used to reduce the diameter of other fittings.Couplings are used to join tubes of either the same size or two different sizes to make longer runs through buildings. Elbows are usedto change the direction of a copper tube. Flanges and unions are used to provide a connection that can be either unscrewed orunbolted for maintenance or repairs. Tees are used to allow a copper line to be split into two separate lines. There are pressure teesand drainage tees; TY’s (90°) and Y’s (45°). Traps are used to trap water to prevent sewer gases from coming back into a building.Cleanouts are used to provide access to drainage systems in case of blockage; and caps are removable plugs used to permit inspectionand access for the purpose of clearing an obstruction.



The goods in question are commonly classified under the following Harmonized System classification numbers:

7412.10.00.117412.10.00.197412.10.00.907412.20.00.117412.20.00.127412.20.00.197412.20.00.90

Please be aware that the above tariff classification numbers may include a broad range of goods that are both subject to and not subject to this expiry review. As well, please be aware that subject goods may have been imported into Canada using tariff classification numbers other than those listed above.

CATEGORIES The subject goods have been divided into the following four categories: 1. Pressure Copper Pipe Fittings: Wrought 2. Pressure Copper Pipe Fittings: Cast 3. DWV Copper Pipe Fittings: Wrought 4. DWV Copper Pipe Fittings: Cast

PERIOD OF REVIEW

January 1, 2013, to March 31, 2016

DUE DATE

As a domestic producer of copper pipe fittings, you are required to complete this questionnaire and return the completed questionnaire no later than August 11, 2016.

INVESTIGATIONS OFFICERS ASSIGNED TO THIS CASE

Any questions relating to this questionnaire should be directed to:

Suzanne Cullen at 613-998-8502 ([email protected]); orAndrew Wigmore at 613-998-8603 ([email protected]); or Grant MacDougall at 613-998-8583 ([email protected]).



WP: Wrought Pressure FTG: Fitting End (Street End)WD: Wrought Drainage LT: Long TurnCP: Cast Pressure MJ: Mechanical JointCD: Cast Drainage DE: Drop EarC: Copper Tube Cupped End or Sweat End DWV: Drainage Waste, VentM: Male NPT Thread TY: 90˚ Drainage TeeFE: Female NPT Thread Y: 45˚Drainage TeeSJ: Slip Joint End

Abbreviation Chart

PRODUCTS COVERED BY THE TRIBUNAL'S ORDERS MADE ON FEBRUARY 17, 2012, IN EXPIRY REVIEW NO. RR‑2011-001

The tables to this appendix list, by product category, the copper pipe fittings that are covered by the Tribunal’s orders. Where an asterisk (*) follows a specific copper pipe fitting description, it indicates that both wrought and cast copper pipe fittings are covered by the Tribunal’s orders.

Copper pipe fittings are identified in terms of imperial measurement, i.e. inches. However, the metric equivalents of the imperial measurement are also covered by the Tribunal’s orders. The term “metric equivalent” refers to those copper pipe fittings that are soft converted equivalents of the imperial-sized copper pipe fittings and does not include fittings that are made specifically in metric dimensions. Copper pipe fittings are also identified in terms of nominal size.

Copper pipe fittings are identified in the tables to this appendix using the following abbreviated terms:



1-1/2 X 1 CXFE CP ADAPTER* 1-1/2 X 2 CXFE CP ADAPTER*2 CXFE CP ADAPTER* 2-1/2 C X FE CP ADAPTER*3 CXFE CP ADAPTER* 1/2 CXFE CP DROP EAR ADAPTER 3/4 CXFE CP DROP EAR ADAPTER 1/2 CXFE CP HIGH EAR ADAPTER*4 CXFE CP ADAPTER* 5 C X FE CP ADAPTER*6 C X FE CP ADAPTER* 1-1/4 CXFE WD ADAPTER*1-1/4 X 1-1/2 CXFE WD ADAPTER* 1-1/4 FTGXFE WD ADAPTER*1-1/2 FTGXFE WD ADAPTER* 2 FTGXFE WD ADAPTER*1-1/2 CXFE WD ADAPTER* 1-1/2 X 1-1/4 CXFE WD ADAPTER*1-1/2 X 2 CXFE WD ADAPTER* 3 FTGXFE WD ADAPTER*2 C X FE WD ADAPTER* 2 X 1-1/2 CXFE WD ADAPTER*3 C X FE WD ADAPTER* 1/4 C X FE WP ADAPTER*3/8 C X FE WP ADAPTER* 3/8 X 1/4 CXFE WP ADAPTER*3/8 X 1/2 CXFE WP ADAPTER* 1/2 C X FE WP ADAPTER*1/2 X 1/4 CXFE WP ADAPTER* 1/2 X 3/8 CXFE WP ADAPTER*1/2 X 3/4 CXFE WP ADAPTER* 1/2 X 1 CXFE WP ADAPTER*5/8 X 1/2 CXFE WP ADAPTER* 5/8 X 3/4 CXFE WP ADAPTER*3/4 C X FE WP ADAPTER* 3/4 X 1/2 CXFE WP ADAPTER*3/4 X 1 CXFE WP ADAPTER* 3/4 X 1-1/4 CXFE WP ADAPTER*3/4 X 1-1/2 CXFE WP ADAPTER* 1 C X FE WP ADAPTER*1 X 1/2 CXFE WP ADAPTER* 1 X 3/4 CXFE WP ADAPTER*1 X 1-1/4 CXFE WP ADAPTER* 1 X 1-1/2 CXFE WP ADAPTER*1-1/4 C X FE WP ADAPTER* 1-1/4 C X 3/4 FE WP ADAPTER*1-1/4 X 1 CXFE WP ADAPTER* 1-1/4 X 1-1/2 CXFE WP ADAPTER*1-1/4 X 2 CXFE WP ADAPTER* 1/4 FTGXFE WP ADAPTER*3/8 FTGXFE WP ADAPTER* 3/8 X 1/4 FTGXFE WP ADAPTER*1/2 FTGXFE WP ADAPTER* 1/2 X 1/4 FTGXFE WP ADAPTER*1/2 X 3/8 FTG X FE ADAPTER* 1/2 FTG X 3/4 FE WP ADAPTER*3/4 FTGXFE WP ADAPTER* 3/4 FTG X 1/2 FE WP ADAPTER*1 FTGXFE WP ADAPTER* 1 FTG X 3/4 FE WP ADAPTER*1-1/4 FTGXFE WP ADAPTER* 1-1/2 FTGXFE WP ADAPTER*2 FTGXFE WP ADAPTER* 1-1/2 C X FE WP ADAPTER*2-1/2 FTGXFE WP ADAPTER* 1-1/2 C X 1 FE WP ADAPTER*1-1/2 X 1-1/4 CXFE WP ADAPTER* 1-1/2 X 2 CXFE WP ADAPTER*3 FTGXFE WP ADAPTER* 2 C X FE WP ADAPTER*2 X 1 C X FE WP ADAPTER* 2 X 1-1/4 CXFE WP ADAPTER*2 X 1-1/2 CXFE WP ADAPTER* 2-1/2 C X FE WP ADAPTER*3 C X FE WP ADAPTER*

Subject Copper Pipe Fittings – Female Adapters



1-1/4 CXM CD ADAPTER* 1-1/4X1-1/2 CXM CD ADAPTER*1-1/2 FTGXM CD ADAPTER* 1-1/2 CXM CD ADAPTER*1-1/2X1-1/4 CXM CD ADAPTER* 2 CXM CD ADAPTER*2 X 1-1/2 CXM CD ADAPTER* 3 CXM CD ADAPTER*4 CXM CD ADAPTER* 1/2 CXM CP ADAPTER*1/2 X 3/4 CXM CP ADAPTER* 3/4 CXM CP ADAPTER*3/4 X 1/2 CXM CP ADAPTER* 3/4 X 1-1/4 CXM CP ADAPTER*1 CXM CP ADAPTER* 1 X 1/2 CXM CP ADAPTER*1 X 1-1/4 CXM CP ADAPTER* 1 X 1-1/2 CXM CP ADAPTER*1-1/4 CXM CP ADAPTER* 1-1/4 X 1/2 CXM CP ADAPTER*1-1/4 X 1 CXM CP ADAPTER* 1-1/2 CXM CP ADAPTER*1-1/2 X 3/4 CXM CP ADAPTER* 2 CXM CP ADAPTER*2 X 1-1/2 C X M CP ADAPTER* 2-1/2 CXM CP ADAPTER*3 CXM CP ADAPTER* 4 CXM CP ADAPTER*5 CXM CP ADAPTER 6 CXM CP ADAPTER 1-1/2 M X 1-1/2 WD ADAPTER* 1-1/4 CXM WD ADAPTER*1-1/4X1-1/2 CXM WD ADAPTER* 1-1/2 FTGXM WD ADAPTER*2 FTGXM WD ADAPTER* 1-1/2 CXM WD ADAPTER*1-1/2 X 1-1/4 CXM WD ADAPTER* 1-1/2 X 2 CXM WD ADAPTER*2 CXM WD ADAPTER* 2 X 1-1/2 CXM WD ADAPTER*3 CXM WD ADAPTER* 4 CXM WD ADAPTER*1-1/4 CXM WD FLUSH TRAP ADAPTER* 1-1/2 CXM WD FLUSH TRAP ADAPTER*2 CXM WD FL TRAP ADAPTER* 1-1/2 CXM WD SCULLY BUSHING*2 CXM WD SCULLY BUSHING* 1/4 CXM WP ADAPTER*1/4 X 3/8 CXM WP ADAPTER* 1/4 X 1/2 CXM WP ADAPTER*3/8 CXM WP ADAPTER* 3/8 X 1/4 CXM WP ADAPTER*3/8 X 1/2 CXM WP ADAPTER* 1/2 CXM WP ADAPTER*1/2 X 1/4 CXM WP ADAPTER* 1/2 X 3/8 CXM WP ADAPTER*1/2 X 3/4 CXM WP ADAPTER* 1/2 X 1 CXM WP ADAPTER*5/8 X 1/2 CXM WP ADAPTER* 5/8 X 3/4 CXM WP ADAPTER*3/4 CXM WP ADAPTER* 3/4 C X 3/8 WP M ADAPTER*3/4 X 1/2 CXM WP ADAPTER* 3/4 X 1 CXM WP ADAPTER*3/4 X 1-1/4 CXM WP ADAPTER* 3/4 X 1-1/2 CXM WP ADAPTER*1 CXM WP ADAPTER* 1 X 1/2 CXM WP ADAPTER*1 X 3/4 CXM WP ADAPTER* 1 X 1-1/4 CXM WP ADAPTER*1 X 1-1/2 CXM WP ADAPTER* 1 X 2 CXM WP ADAPTER*1-1/4 CXM WP ADAPTER* 1-1/4 X 3/4 CXM WP ADAPTER*1-1/4 X 1 CXM WP ADAPTER* 1-1/4 X 1-1/2 CXM WP ADAPTER*1-1/4 X 2 CXM WP ADAPTER* 1/4 FTGXM WP ADAPTER*3/8 FTGXM WP ADAPTER* 1/2 FTGXM WP ADAPTER*1/2 X 3/8 FTGXM WP ADAPTER* 1/2 X 3/4 FTGXM WP ADAPTER*

Subject Copper Pipe Fittings – Male Adapters



3/4 FTGXM WP ADAPTER* 3/4 X 1/2 FTGXM WP ADAPTER*1 FTGXM WP ADAPTER* 1 X 3/4 FTGXM WP ADAPTER*1-1/4 FTGXM WP ADAPTER* 1-1/2 FTGXM WP ADAPTER*2 FTGXM WP ADAPTER* 1-1/2 CXM WP ADAPTER*2-1/2 FTGXM WP ADAPTER* 1-1/2 X 1 CXM WP ADAPTER*1-1/2 X 1-1/4 CXM WP ADAPTER* 1-1/2 X 2 CXM WP ADAPTER*3 FTG X M WP ADAPTER* 2 CXM WP ADAPTER*2 X 1-1/4 CXM WP ADAPTER* 2 X 1-1/2 CXM WP ADAPTER*2 X 2-1/2 C X M WP ADAPTER* 2-1/2 CXM WP ADAPTER*2-1/2 X 2 CXM WP ADAPTER* 3 CXM WP ADAPTER*4 CXM WP ADAPTER* 1/2 X 3/4 C X HOSE WP ADAPTER*

1-1/4 X 2 CXSP CD FERRULE* 1-1/2 X 2 CXSP CD FERRULE*1-1/2 X 3 CXSP CD FERRULE* 2 CXSP CD FERRULE*2 X 3 CXSP CD FERRULE* 2 X 4 CXSP CD FERRULE*3 CXSP CD FERRULE* 3 X 4 CXSP CD FERRULE*4 CXSP CD FERRULE* 3 X 4 CXSP CD ECCENTRIC FERRULE*1-1/4 X 2 CXMJ CD ADAPTER* 1-1/4 X 3 CXMJ CD ADAPTER*1-1/2 X 2 CXMJ CD ADAPTER* 1-1/2 X 3 CXMJ CD ADAPTER*1-1/2 X 4 CXMJ CD ADAPTER* 2 X 3 CXMJ CD ADAPTER*2 X 4 CXMJ CD ADAPTER* 3 CXMJ CD ADAPTER*3 X 4 CXMJ CD ADAPTER* 4 CXMJ CD ADAPTER*6 C X M J CD ADAPTER* 1-1/4 FTGXSJ CD ADAPTER*4 ACT(3S)X1-1/2C-30 CD ROOF ADAPTER* 4 ACT(3S) X 2C-30 CD ROOF ADAPTER*4 SOIL(5A)X 1-1/2 C CD ROOF ADAPTER* 4 SOIL(5A)X 2 C CD ROOF ADAPTER*5ACT 4SX 3C CD ROOF ADAPT CALGARY* 5S X 3C CD ROOF ADAPT REGINA*1-1/2 SJXODX3/4M/1/2FE CD CONDENSATE TEE 2 C X SJ CD ADAPTER*2 C X MJ WD ADAPTER* 1-1/4 FE X SJ WD ADAPTER*1-1/2 FE X SJ WD ADAPTER* 1-1/2 X1-1/4 FE X SJ WD ADAPTER*1-1/4 FTG X SJ WD ADAPTER* 1-1/2 FTG X SJ WD ADAPTER*1-1/2 X 1-1/4 FTG X SJ ADAPTER* 1-1/4 M X SJ WD ADAPTER*1-1/2 M X SJ WD ADAPTER* 1-1/2 X 1-1/4 M X SJ WD ADAPTER*1-1/4 C X SJ WD ADAPTER* 1-1/4 X 1-1/2 CXSJ WD ADAPTER*1-1/2 C X SJ WD ADAPTER* 1-1/2 X 1-1/4 CXSJ WD ADAPTER*2 C X SJ WD ADAPTER* 1/2 CXM WP FLUSH VALVE ADAPTER*3/4 CXM WP FLUSH VALVE ADAPTER*

Subject Copper Pipe Fittings – Other Adapters



3 X 1-1/2 FTGXC CD BUSHING* 5 X 4 FTGXC CP BUSHING*6 X 2 FTGXC CP BUSHING* 6 X 3 FTGXC CP BUSHING*6 X 4 FTGXC CP BUSHING* 6 X 5 FTGXC CP BUSHING*1 X 1/2 FTGXFE CP FLUSH BUSHING* 1-1/4 X 1 FTGXFE CP FLUSH ADAPTER*1 1/2 FTG X 1 FE C CP FLUSH BUSHING* 1-1/2X1-1/4 FTGXC WD BUSHING*2 X 1-1/4 FTGXC WD BUSHING* 2 X 1-1/2 FTGXC WD BUSHING*3 X 1-1/4 FTGXC WD BUSHING* 3 X 1-1/2 FTGXC WD BUSHING*3 X 2 FTGXC WD BUSHING* 4 X 2 FTGXC WD BUSHING*4 X 3 FTGXC WD BUSHING* 1-1/4 CXM WD TRAP BUSHING*1-1/2 CXM WD TRAP BUSHING* 2 CXM WD TRAP BUSHING*3/8 X 1/8 FTGXC WP BUSHING* 3/8 X 1/4 FTGXC WP BUSHING*1/2 X 1/4 FTGXC WP BUSHING* 1/2 X 3/8 FTGXC WP BUSHING*5/8 X 1/4 FTGXC WP BUSHING* 5/8 X 3/8 FTGXC WP BUSHING*5/8 X 1/2 FTGXC WP BUSHING* 3/4 X 1/4 FTGXC WP BUSHING*3/4 X 3/8 FTGXC WP BUSHING* 3/4 X 1/2 FTGXC WP BUSHING*3/4 X 5/8 FTGXC WP BUSHING* 1 X 3/8 FTGXC WP BUSHING*1 X 1/2 FTGXC WP BUSHING* 1 X 5/8 FTGXC WP BUSHING*1 X 3/4 FTGXC WP BUSHING* 1-1/4 X 1/2 FTGXC WP BUSHING*1-1/4 X 3/4 FTGXC WP BUSHING* 1-1/4 X 1 FTGXC WP BUSHING*1-1/2 X 1/2 FTGXC WP BUSHING* 1-1/2 X 3/4 FTGXC WP BUSHING*1-1/2 X 1 FTGXC WP BUSHING* 1-1/2 X1-1/4 FTGXC WP BUSHING*2 X 1/2 FTGXC WP BUSHING* 2 X 3/4 FTGXC WP BUSHING*2 X 1 FTGXC WP BUSHING* 2 X 1-1/4 FTGXC WP BUSHING*2 X 1-1/2 FTGXC WP BUSHING* 2-1/2 X 1 FTGXC WP BUSHING*2-1/2 X 1-1/4 FTGXC WP BUSHING* 2-1/2 X 1-1/2 FTGXC WP BUSHING*2-1/2 X 2 FTGXC WP BUSHING* 3 X 1/2 FTGXC WP BUSHING*3 X 3/4 FTGXC WP BUSHING* 3 X 1 FTGXC WP BUSHING*3 X 1-1/4 FTGXC WP BUSHING* 3 X 1-1/2 FTGXC WP BUSHING*3 X 2 FTGXC WP BUSHING* 3 X 2-1/2 FTGXC WP BUSHING*3-1/2 X 2 FTGXC WP BUSHING* 3-1/2 X 2-1/2 FTGXC WP BUSHING*3-1/2 X 3 FTGXC WP BUSHING* 4 X 1-1/4 FTGXC WP BUSHING*4 X 1-1/2 FTGXC WP BUSHING* 4 X 2 FTGXC WP BUSHING*4 X 2-1/2 FTGXC WP BUSHING* 4 X 3 FTGXC WP BUSHING*4 X 3-1/2 FTGXC WP BUSHING* 1/2 X 1/4 FTGXC WP FLUSH BUSHING*1/2 X 3/8 FTGXC WP FLUSH BUSHING* 5/8 X 3/8 FTGXC WP FLUSH BUSHING*3/4 X 1/2 FTGXC WP FLUSH BUSHING* 1 X 1/2 FTGXC WP FLUSH BUSHING*1 X 3/4 FTGXC WP FLUSH BUSHING* 1-1/4X3/4 FTGXC W FL BUSHING*1-1/4 X 1 FTGXC WP FLUSH BUSHING* 1-1/2 X 1 FTGXC WP FLUSH BUSHING*1-1/2 X 1-1/4 FTGXC WP FLUSH BUSHING* 2 X 1-1/2 FTGXC WP FLUSH BUSHING*1 X 1/2 FE WP FLUSH BUSHING* 1-1/4 X 3/4 FE WP FLUSH BUSHING*1-1/4 X 1 FTGXFE WP FLUSH BUSHING* 1-1/2 X 1 FTGXFE WP FLUSH BUSHING*

Subject Copper Pipe Fittings – Bushings



3/4 CXC CP COUPLING* 1-1/4 CXC CP COUPLING*4 CXC CP COUPLING* 5 X 3 CXC CP COUPLING*5 X 4 CXC CP COUPLING* 6 X 2 CXC CP COUPLING*6 X 3 CXC CP COUPLING* 6 X 4 CXC CP COUPLING*6 X 5 CXC CP COUPLING* 1/2 CXC CP JET DRAIN COUPLING 3/4 CXC CP JET DRAIN COUPLING 1 CXC CP JET DRAIN COUPLING 3/4 X 1/2 CXC CP ECCENTRIC COUPLING* 1 X 1/2 CP ECCENTRIC COUPLING*1 X 3/4 CXC CP ECCENTRIC COUPLING* 1-1/4 X 1/2 CP ECCENTRIC COUPLING*1-1/2 X 1 CXC CP ECCENTRIC COUPLING* 1-1/2 X 1-1/4 CXC CP ECCENTRIC COUPLING*2 X 1-1/4 CXC CP ECCENTRIC COUPLING* 2 X 1-1/2 CXC CP ECCENTRIC COUPLING*3 X 2 CXC CP ECCENTRIC COUPLING* 3/4 CXC CP CROSSOVER COUPLING*1/2C X 1M X 1/2 FE CP BOILER COUPLING 1/2 X 1 X 1/2 CXMXFE CP BOILER COUPLING 1-1/4 CXC WD COUPLING* 1-1/2 CXC WD COUPLING*1-1/2X 1-1/4 CXC WD COUPLING* 2 CXC WD COUPLING*2 X 1-1/4 CXC WD COUPLING* 2 X 1-1/2 CXC WD COUPLING*3 CXC WD COUPLING* 3 X 1-1/4 CXC WD COUPLING*3 X 1-1/2 CXC WD COUPLING* 3 X 2 CXC WD COUPLING*4 CXC WD COUPLING* 4 X 1-1/2 CXC WD COUPLING*4 X 2 CXC WD COUPLING* 4 X 3 CXC WD COUPLING*4 X 1-1/2 CXC CD COUPLING* 4 X 3 CXC CD COUPLING*6 CXC WD COUPLING* 1-1/4 CXC WD COUPLING NO STOP*1-1/2 CXC WD COUPLING NO STOP* 2 CXC WD COUPLING NO STOP*3 CXC WD COUPLING NO STOP* 4 CXC WD COUPLING NO STOP*1/8 CXC WP COUPLING* 1/4 CXC WP COUPLING*1/4 X 1/8 CXC WP COUPLING* 3/8 CXC WP COUPLING*3/8 X 1/4 CXC WP COUPLING* 1/2 CXC WP COUPLING*1/2 X 1/8 CXC WP COUPLING* 1/2 X 1/4 CXC WP COUPLING*1/2 X 3/8 CXC WP COUPLING* 5/8 CXC WP COUPLING*5/8 X 1/4 CXC WP COUPLING* 5/8 X 3/8 CXC WP COUPLING*5/8 X 1/2 CXC WP COUPLING* 3/4 CXC WP COUPLING*3/4 X 1/4 CXC WP COUPLING* 3/4 X 3/8 CXC WP COUPLING*3/4 X 1/2 CXC WP COUPLING* 3/4 X 5/8 CXC WP COUPLING*1 CXC WP COUPLING* 1 X 3/8 CXC WP COUPLING*1 X 1/2 CXC WP COUPLING* 1 X 5/8 CXC WP COUPLING*1 X 3/4 CXC WP COUPLING* 1-1/4 CXC WP COUPLING*1-1/4 X 1/2 CXC WP COUPLING* 1-1/4 X 3/4 CXC WP COUPLING*1-1/4 X 1 CXC WP COUPLING* 1-1/2 CXC WP COUPLING*1-1/2 X 1/2 CXC WP COUPLING* 1-1/2 X 3/4 CXC WP COUPLING*1-1/2 X 1 CXC WP COUPLING* 1-1/2 X 1-1/4 CXC WP COUPLING*2 CXC WP COUPLING* 2 X 1/2 CXC WP COUPLING*2 X 3/4 CXC WP COUPLING* 2 X 1 CXC WP COUPLING*2 X 1-1/4 CXC WP COUPLING* 2 X 1-1/2 CXC WP COUPLING*2-1/2 CXC WP COUPLING* 2-1/2 X 3/4 CXC WP COUPLING*2-1/2 X 1 CXC WP COUPLING* 2-1/2 X 1-1/4 CXC WP COUPLING*2-1/2 X 1-1/2 CXC WP COUPLING* 2-1/2 X 2 CXC WP COUPLING*3 CXC WP COUPLING* 3 X 3/4 CXC WP COUPLING*3 X 1 CXC WP COUPLING* 3 X 1-1/4 CXC WP COUPLING*3 X 1-1/2 CXC WP COUPLING* 3 X 2 CXC WP COUPLING*

Subject Copper Pipe Fittings – Couplings



3 X 2-1/2 CXC WP COUPLING* 3-1/2 CXC WP COUPLING*3-1/2 X 3 CXC WP COUPLING* 4 CXC WP COUPLING*4 X 1-1/2 CXC WP COUPLING* 4 X 2 CXC WP COUPLING*4 X 2-1/2 CXC WP COUPLING* 4 X 3 CXC WP COUPLING*4 X 3-1/2 CXC WP COUPLING* 5 CXC WP COUPLING*6 CXC WP COUPLING* 6 X 2-1/2 WP COUPLINGS*1-1/4 X 3/4 CXC WP ECCENTRIC COUPLING* 1-1/4 X 1 CXC WP ECCENTRIC COUPLING*1/8 CXC WP COUPLING NO STOP* 1/4 CXC WP COUPLING NO STOP*3/8 CXC WP COUPLING NO STOP* 1/2 CXC WP COUPLING NO STOP*5/8 CXC WP COUPLING NO STOP* 3/4 CXC WP COUPLING NO STOP*1 CXC WP COUPLING NO STOP* 1-1/4 CXC WP COUPLING NO STOP*1-1/2 CXC WP COUPLING NO STOP* 2 CXC WP COUPLING NO STOP*2-1/2 CXC WP COUPLING NO STOP* 3 CXC WP COUPLING NO STOP*4 CXC WP COUPLING NO STOP* 5 CXC WP COUPLING NO STOP*6 CXC WP COUPLING NO STOP* 1/2 X 3 CXC WP REPAIR COUPLING 1/2 X 6 C X C WP REPAIR COUPLING 3/4 X 3 C X C WP REPAIR COUPLING 1/8 CXC WP RING COUPLING* 1/4 CXC WP RING COUPLING*3/8 CXC WP RING COUPLING* 1/2 CXC WP RING COUPLING*5/8 CXC WP RING COUPLING* 3/4 CXC WP RING COUPLING*1 CXC WP RING COUPLING* 1-1/4 CXC WP RING COUPLING*1-1/2 CXC WP RING COUPLING* 2 CXC WP RING COUPLING*2-1/2 CXC WP RING COUPLING* 3 CXC WP RING COUPLING*4 CXC WP RING COUPLING* 1/2 X 3-1/4 FTGXC WP SLIDE COUPLING 3/4 X 5 FTGXC WP SLIDE COUPLING 1/2 CXC WP CROSSOVER COUPLING*3/4 CXC WP CROSSOVER COUPLING*



1-1/4 CXC 11-1/4 CD ELBOW* 1-1/2 CXC 11-1/4 CD ELBOW*2 CXC 11-1/4 CD ELBOW* 3 CXC 11-1/4 CD ELBOW*4 C X C 11-1/4 CD ELBOW* 1-1/4 CXC 22-1/2 CD ELBOW*1-1/2 CXC 22-1/2 CD ELBOW* 2 CXC 22-1/2 CD ELBOW*3 CXC 22-1/2 CD ELBOW* 4 CXC 22-1/2 CD ELBOW*3 FTGXC 45 CD ELBOW* 4 FTGXC 45 CD ELBOW*2 CXM CD 45 ELBOW* 1-1/4 CXC 45 CD ELBOW*1-1/2 CXC 45 CD ELBOW* 2 CXC 45 CD ELBOW*3 CXC 45 CD ELBOW* 4 CXC 45 CD ELBOW*1-1/4 CXC 60 CD ELBOW* 1-1/2 CXC 60 CD ELBOW*2 CXC 60 CD ELBOW* 3 CXC 60 CD ELBOW*4 CXC 60 CD ELBOW* 1-1/4 CXC CD 90 ELBOW*1-1/4 FTGXC CD 90 ELBOW* 1-1/2 FTGXC CD 90 ELBOW*2 FTGXC CD 90 ELBOW* 1-1/2 CXC CD 90 ELBOW*1-1/2 X 1-1/4 CXC CD 90 ELBOW* 3 CD FTGXC 90 ELBOW*4 FTGXC CD 90 ELBOW* 2 CXC CD 90 ELBOW*2X 1-1/4 CXC CD 90 ELBOW* 2 X 1-1/2 CXC CD 90 ELBOW*1-1/2 CXFE CD 90 ELBOW* 2 CXFE CD 90 ELBOW*1-1/2 CXM CD 90 ELBOW 2 CXM CD 90 ELBOW 3 CXC CD 90 ELBOW 4 CXC CD 90 ELBOW 1-1/2 CXSJ CD 90 ELBOW 1/2 X 1 CXC CP CLOSE RETURN BEND 3/4 1-3/8 CXC CP CLOSE RETURN BEND 1 X 1-3/4 CXC CP CLOSE RETURN BEND 1/2 C X M CP 45 ELBOW 3/4 C X M CP 45 ELBOW 1-1/4 C X M CP 45 ELBOW 4 CXC CP 45 ELBOW 6 CXC CP 45 ELBOW 1/2 C X C CP 90 ELBOW 1-1/4 CXC CP 90 ELBOW 1-1/4 X 1/2 CXC CP 90 ELBOW 1-1/4 X 3/4 CP 90 ELBOW 1-1/4 X 1 CP 90 ELBOW 1-1/2 X 1/2 CP 90 ELBOW 1-1/2 X 3/4 CXC CP 90 ELBOW 1-1/2 X 1 CXC CP 90 ELBOW 1/4 C X FE CP 90 ELBOW 1/2 CXFE CP 90 ELBOW 1/2 X 3/8 CXFE CP 90 ELBOW 1/2 X 3/4 CXFE CP 90 ELBOW 1/2 X 1 CXFE CP 90 ELBOW 3/4 CXFE CP 90 ELBOW 3/4 X 1/2 CXFE CP 90 ELBOW 3/4 X 1 CXFE CP 90 ELBOW 1 CXFE CP 90 ELBOW 1 X 1/2 C X FE CP 90 ELBOW 1 X 3/4 CXFE CP 90 ELBOW 1-1/4 CXFE CP 90 ELBOW 1-1/4 X 1/2 CXFE CP 90 ELBOW 1-1/4 X 3/4 CXFE CP 90 ELBOW 1-1/4 X 1 CXFE CP 90 ELBOW 2 X 3/4 CXC CP 90 ELBOW 2 X 1 CXC CP 90 ELBOW 2 X 1-1/4 CXC CP 90 ELBOW 1-1/2 CXFE CP 90 ELBOW 1-1/2 X 1 C X FE CP 90 ELBOW 2 CXFE CP 90 ELBOW 3 C X FE CP 90 ELBOW 1/2 CXFE CP 90 DROP EAR ELBOW 1/2C X 3/8FE CP 90 DROP EAR ELBOW 1/2 X 3/4 CXFE CP 90 DROP EAR ELBOW

Subject Copper Pipe Fittings – Elbows



3/4 CXFE CP 90 DROP EAR ELBOW 3/4C X 1/2FE CP 90 DROP EAR ELBOW 1 CXFE CP 90 DROP EAR ELBOW 1/2 CXFE CP DROP EAR IMPORT 90 ELBOW 1/2 CXFE CP HIGH EAR 90 ELBOW 3/4 CXFE CP HIGH EAR 90 ELBOW 1/2 CXFE CP FLANGE SINK 90 ELBOW 1/2 CXM CP 90 ELBOW 1/2 X 3/8 CXM CP 90 ELBOW 1/2 X 3/4 CXM CP 90 ELBOW 3/4 CXM CP 90 ELBOW 3/4 X 1/2 CXM CP 90 ELBOW 3/4 C X 1 M CP 90 ELBOW 1 CXM CP 90 ELBOW 1 X 3/4 CXM CP 90 ELBOW 1-1/4 CXM CP P 90 ELBOW 1-1/4 X 1 CXM CP 90 ELBOW 1-1/2 CXM CP 90 ELBOW 2 CXM CP 90 ELBOW 1/2 CXC CP DROP EAR 90 ELBOW 3/4 CXC CP 90 DROP EAR ELBOW 1 CXC CP 90 DROP EAR ELBOW 1/2 CXC CP HIGH EAR 90 ELBOW 3/4 CXC CP HIGH EAR 90 ELBOW 6 CXC CP 90 ELBOW 1/2C X 1/8FE X 1/2C CP BASE TEE*1/2C X 1/8FE X 3/4C CP BASE TEE* 3/4C X 1/8FE X 3/4C CP BASE TEE*1C X 1/8FE X 1 C CP BASE TEE* 1-1/4C X 1/8FEX1-1/4C CP BASE TEE*3/4FE X 1/8FE X 3/4C CP BASE TEE 1-1/4 CXFTG WD 45 ELBOW*1-1/2 FTGXC WD 45 ELBOW* 2 FTGXC WD 45 ELBOW*3 C X FTG WD 45 ELBOW* 1-1/4 CXC WD 45 ELBOW*1-1/2 CXC WD 45 ELBOW* 2 CXC WD 45 ELBOW*3 CXC WD 45 ELBOW* 1-1/4 CXC WD 90 ELBOW*1-1/4 FTGXC WD 90 ELBOW* 1-1/2 FTGXC WD 90 ELBOW*2 FTGXC WD 90 ELBOW* 1-1/2 CXC WD 90 ELBOW*2 CXC WD 90 ELBOW* 3 CXC WD 90 ELBOW*1-1/2 CXC WD 90 LT ELBOW* 2 CXC WD 90 LT ELBOW*1/4 CXC WP 45 ELBOW* 3/8 CXC WP 45 ELBOW*1/2 CXC WP 45 ELBOW* 5/8 CXC WP 45 ELBOW*3/4 CXC WP 45 ELBOW* 1 CXC WP 45 ELBOW*1-1/4 CXC WP 45 ELBOW* 1/4 FTG X C WP 45 ELBOW*3/8 FTGXC WP 45 ELBOW* 1/2 FTGXC WP 45 ELBOW*5/8 FTGXC WP 45 ELBOW* 3/4 FTGXC WP 45 ELBOW*1 FTGXC WP 45 ELBOW* 1-1/4 FTGXC WP 45 ELBOW*1-1/2 FTGXC WP 45 ELBOW* 2 FTGXC WP 45 ELBOW*1-1/2 CXC WP 45 ELBOW* 2-1/2 FTGXC WP 45 ELBOW*2 CXC WP 45 ELBOW* 2-1/2 CXC WP 45 ELBOW*3 CXC WP 45 ELBOW* 4 CXC WP 45 ELBOW*1/4 CXC WP 90 ELBOW* 3/8 CXC WP 90 ELBOW*1/2 CXC WP 90 ELBOW* 5/8 CXC WP 90 ELBOW*3/4 CXC WP 90 ELBOW* 3/4 X 1/2 CXC WP 90 ELBOW*1 CXC WP 90 ELBOW* 1 X 1/2 CXC WP 90 ELBOW*1 X 3/4 CXC WP 90 ELBOW* 1-1/4 CXC WP 90 ELBOW*1-1/4 X 1 CXC WP 90 ELBOW* 1/4 FTGXC WP 90 ELBOW*3/8 FTGXC WP 90 ELBOW* 1/2 FTGXC WP 90 ELBOW*



5/8 FTGXC WP 90 ELBOW* 3/4 FTGXC WP 90 ELBOW*1 FTGXC WP 90 ELBOW* 1-1/4 FTGXC WP 90 ELBOW*1/2 FTGXFTG WP 90 ELBOW* 3/4 FTG X FTG WP 90 ELBOW*1-1/2 FTGXC WP 90 ELBOW* 2 FTGXC WP 90 ELBOW*1-1/2 CXC WP 90 ELBOW* 2-1/2 FTGXC WP 90 ELBOW*1-1/2CX 1-1/4C WP 90 ELBOW* 2 CXC WP 90 ELBOW*2-1/2 CXC WP 90 ELBOW* 3 CXC WP 90 ELBOW*4 CXC WP 90 ELBOW* 1/2 CXC WP 90 VENT ELBOW*3/4 CXC WP 90 VENT ELBOW* 1 CXC WP 90 VENT ELBOW*1/4 CXC LT WP 90 ELBOW 3/8 CXC LT WP 90 ELBOW 1/2 CXC LT WP 90 ELBOW 5/8 CXC LT WP 90 ELBOW 3/4 CXC LT WP 90 ELBOW 1 CXC LT WP 90 ELBOW 1-1/4 CXC LT WP 90 ELBOW 1/4 CXFTG LT WP 90 ELBOW 3/8 C X FTG LT WP 90 ELBOW 1/2 C X FTG LT WP 90 ELBOW 5/8 CXFTG LT WP 90 ELBOW 3/4 CXFTG LT WP 90 ELBOW 1 CXFTG LT WP 90 ELBOW 1-1/4 CXFTG LT WP 90 ELBOW 1-1/2 CXFTG LT WP 90 ELBOW 2 CXFTG LT WP 90 ELBOW 1-1/2 CXC LT WP 90 ELBOW 2 CXC LT WP 90 ELBOW

3 X 4 CXC CD CLOSET FLANGE* 8 COMPANION CP FLANGE 150# SILVER BRAZED 4 CD CAULKING FLOOR FLANGE* 4 X 4 CXC CD CLOSET FLANGE*3 X 4 FITTING CD CLOSET FLANGE 3 X 4 CD ECCENTRIC CLOSET FLANGE*3 X 4 CD M J CLOSET FLANGE* 3/4 CP COMPANION FLANGE - 125# 1/2 CP COMPANION FLANGE - 125# 1-1/4 CP COMPANION FLANGE - 125# 1 CP COMPANION FLANGE - 125# 2 CP COMPANION FLANGE - 125# 1-1/2 CP COMPANION FLANGE - 125# 3 CP COMPANION FLANGE - 125# 2-1/2 CP COMPANION FLANGE - 125# 4 CP COMPANION FLANGE - 125# 3-1/2 CP COMPANION FLANGE #125 6 CP COMPANION FLANGE - 125# 5 CP COMPANION FLANGE - 125# 1/2 CP COMPANION FLANGE - 150# 8 CP COMPANION FLANGE - 125# 1 CP COMPANION FLANGE - 150# 3/4 CP COMPANION FLANGE - 150# 1-1/2 CP COMPANION FLANGE - 150# 1-1/4 CP COMPANION FLANGE - 150# 2-1/2 CP COMPANION FLANGE - 150# 2 CP COMPANION FLANGE - 150# 3-1/2 CP COMPANION FLANGE - 150# 3 CP COMPANION FLANGE - 150# 5 CP COMPANION FLANGE - 150# 4 X 9 CP COMPANION FLANGE - 150# 8 CP COMPANION FLANGE - 150# 6 CP COMPANION FLANGE -150# 1 X 5 CP COMPANION FLANGE - 300# 1/2 CP COMPANION FLANGE - 300# 1-1/2 X 6-1/2 CP COMPANION FLANGE-300# 1-1/4 CP COMPANION FLANGE - 300# 2-1/2 CP COMPANION FLANGE - 300# 2 CP COMPANION FLANGE - 300# 4 CP COMPANION FLANGE - 300# 3 X 8-1/4 CP COMPANION FLANGE - 300# 2 X 6 CP BLIND COMPANION FLANGE 1-1/2 CP BLIND COMPANION FLANGE 13-1/2 X 8 CP BLIND COMPANION FLANGE 3 X 7-1/2 CP BLIND COMPANION FLANGE 3 COMPANION CP FLANGE 150# SILVER BRAZED 8 COMPANION CP FLANGE 125# SILVER BRAZED

Subject Copper Pipe Fittings – Flanges



1/2 CXCXC CP DROP EAR TEE 1/2 CXCXFE CP TEE 1/2 X 1/2 X 1/4 CXCXFE CP TEE 1/2C X 1/2C X 3/8FE CP TEE 1/2 X 1/2 X 3/4 CXCXFE CP TEE 3/4 CXCXFE CP TEE 3/4C X 1/2C X 1/2FE CP TEE 3/4 X 1/2 X 3/4 CXCXFE CP TEE 3/4 X 3/4 X 3/8 CCFE CP TEE 3/4C X 3/4C X 1/2FE CP TEE 3/4 X 3/4 X 1 CXCXFE CP TEE 1 CXCXFE CP CP TEE 1 X 1 X 1/2 CXCXFE CP TEE 1 X 1 X 3/4 CXCXFE CP TEE 1-1/4 CXCXFE CP TEE 1-1/4 X 1-1/4 X 1/2 CCFE CP TEE 1-1/4 X 1-1/4 X 3/4 CCFE CP TEE 1-1/4X1-1/4X1 CCFE CP TEE 1-1/2 CXCXFE CP TEE 1-1/2X1-1/2X1/2 CCFE CP TEE 1-1/2 X 1-1/2 X 3/4 CCFE CP TEE 1-1/2 X 1-1/2 X 1 CCFE CP TEE 1/2 CXFEXFE CP TEE 1/2C X 3/4FE X 1/2FE CP TEE 3/4 C X FE X FE CP TEE 3/4 C X 3/4 FE X 1/2 FE CP TEE 2 CXCXFE CP TEE 2 X 2 X 1/2 CXCXFE CP TEE 2 X 2 X 3/4 CXCXFE CP TEE 2 X 2 X 1 CXCXFE CP TEE 1/2 CXCXFE CP DROP EAR TEE 3/4 CXCXFE CP DROP EAR TEE 3/4C X 3/4C X 1/2FE CP DROP EAR TEE 3/8 C X FE X C CP TEE 1/2 CXFEXC CP TEE 1/2C X 1/2FE X 3/4C CP TEE 1/2C X 3/4FE X 1/2C CP TEE 3/4 CXFEXC CP TEE 3/4 X 1/2 X 1/2 CXFEXC CP TEE 3/4C X 1/2FE X 3/4C CP TEE 3/4C X 3/4FE X 1/2C CP TEE 1 CXFEXC CP TEE 1C X 1/2FE X 1C CP TEE 1 X 3/4 X 1 CXFEXC CP TEE 1-1/4 CXFEXC CP TEE 1-1/4 X 1/2 X 1-1/4 CXFEXC CP TEE 1-1/4 X 3/4 X 1-1/4 CXFEXC CP TEE 1-1/2 C X FE X C CP TEE 1-1/2X1/2X1-1/2 CXFEXC CP TEE 1-1/2X3/4X1-1/2 CXFEXC CP TEE 1/2 FEXFEXC CP TEE 3/4 FEXFEXC CP TEE 3/4FE X 1/2FE X 1/2C CP TEE 3/4FE X 1/2FE X 3/4C CP TEE 3/4FE X 3/4FE X 1/2C CP TEE 2 C X FE X C CP TEE 2 X 1/2 X 2 CXFEXC CP TEE 2 X 3/4 X 2 CXFEXC CP TEE 1/2FE X 3/4M X 1/2C CP TEE 1/2 CXCXCXC CP CROSS*3/4 CXCXCXC CP CROSS* 1 CXCXCXC CP CROSS*1-1/2 CXCXCXC CP CROSSES* 2 CXCXCXC CP CROSS*3/4 CXFTGXC CP TEE* 2 X 2 X 3 CXCXC CP TEE*2-1/2 X 1/2 X 2-1/2 CP TEE* 2-1/2 X 1-1/2 X 1-1/2 CP TEE*5 CXCXC CP TEE* 5 X 5 X 3 CXCXC CP TEE*6 CXCXC CP TEE* 3/4FE X 1/8 FE X 3/4C WP BASEBOARD TEE*1/8 CXCXC WP TEE* 1/4 CXCXC WP TEE*3/8 CXCXC WP TEE* 1/2 CXCXC WP TEE*1/2 X 1/2 X 3/4 CXCXC WP TEE* 3/4 CXCXC WP TEE*3/4 X 1/2 X 1/2 CXCXC WP TEE* 3/4 X 1/2 X 3/4 CXCXC WP TEE*3/4 X 3/4 X 1/4 CXCXC WP TEE* 3/4C X 3/4C X 3/8C CXCXC WP TEE*3/4 X 3/4 X 1/2 CXCXC WP TEE* 1 CXCXC WP TEE*1 X 1/2 X 1/2 CXCXC WP TEE* 1 X 1/2 X 3/4 CXCXC WP TEE*1 X 1/2 X 1 CXCXC WP TEE* 1 X 3/4 X 1/2 CXCXC WP TEE*1 X 3/4 X 3/4 CXCXC WP TEE* 1 X 3/4 X 1 CXCXC WP TEE*1 X 1 X 3/8 CXCXC WP TEE* 1 X 1 X 1/2 CXCXC WP TEE*1 X 1 X 3/4 CXCXC WP TEE* 1-1/4 CXCXC WP TEE*1-1/4 X 1/2 X 1/2 CXCXC WP TEE* 1-1/4 X 1/2 X 3/4 CXCXC WP TEE*

Subject Copper Pipe Fittings – Pressure Tees



1-1/4 X 1/2 X 1 CXCXC WP TEE* 1-1/4 X 1/2 X 1-1/4 CXCXC WP TEE*1-1/4 X 3/4 X 1/2 CXCXC WP TEE* 1-1/4 X 3/4 X 3/4 CXCXC WP TEE*1-1/4 X 3/4 X 1 CXCXC WP TEE* 1-1/4 X 3/4 X 1-1/4 CXCXC WP TEE*1-1/4 X 1 X 1/2 CXCXC WP TEE* 1-1/4 X 1 X 3/4 CXCXC WP TEE*1-1/4 X 1 X 1 CXCXC WP TEE* 1-1/4 X 1 X 1-1/4 CXCXC WP TEE*1-1/4 X 1-1/4 X 1/2 CXCXC WP TEE* 1-1/4 X 1-1/4 X 3/4 CXCXC WP TEE*1-1/4C X 1-1/4C X 1C CXCXC WP TEE* 1-1/2 CXCXC CXCXC WP TEE*1-1/2 X 1/2 X 1/2 CXCXC WP TEE* 1-1/2 X 1/2 X 3/4 CXCXC WP TEE*1-1/2 X 1/2 X 1 CXCXC WP TEE* 1-1/2 X 1/2 X 1-1/4 CXCXC WP TEE*1-1/2 X 1/2 X 1-1/2 CXCXC WP TEE* 1-1/2 X 3/4 X 1/2 CXCXC WP TEE*1-1/2 X 3/4 X 3/4 CXCXC WP TEE* 1-1/2 X 3/4 X 1 CXCXC WP TEE*1-1/2 X 3/4 X 1-1/4 CXCXC WP TEE* 1-1/2 X 3/4 X 1-1/2 CXCXC WP TEE*1-1/2 X 1 X 1/2 CXCXC WP TEE* 1-1/2 X 1 X 3/4 CXCXC WP TEE*1-1/2 X 1 X 1 CXCXC WP TEE* 1-1/2 X 1 X 1-1/4 CXCXC WP TEE*1-1/2 X 1 X 1-1/2 CXCXC WP TEE* 1-1/2 X 1-1/4 X 1/2 CXCXC WP TEE*1-1/2 X 1-1/4 X 3/4 CXCXC WP TEE* 1-1/2 X 1-1/4 X 1 CXCXC WP TEE*1-1/2 X 1-1/4 X 1-1/4 CXCXC WP TEE* 1-1/2 X 1-1/4 X 1-1/2 CXCXC WP TEE*1-1/2 X 1-1/2 X 1/2 CXCXC WP TEE* 1-1/2 X 1-1/2 X 3/4 CXCXC WP TEE*1-1/2 X 1-1/2 X 1 CXCXC WP TEE* 1-1/2 X 1-1/2 X 1-1/4 CXCXC WP TEE*2 CXCXC CXCXC WP TEE* 2 X 1/2 X 2 CXCXC WP TEE*2 X 3/4 X 2 CXCXC WP TEE* 2 X 1 X 3/4 CXCXC WP TEE*2 X 1 X 1 CXCXC WP TEE* 2C X 1C X 1-1/4C CXCXC WP TEE*2 X 1 X 1-1/2 CXCXC WP TEE* 2 X 1 X 2 CXCXC WP TEE*2 X 1-1/4 X 1/2 CXCXC WP TEE* 2 X 1-1/4 X 3/4 CXCXC WP TEE*2 X 1-1/4 X 1 CXCXC WP TEE* 2 X 1-1/4 X 1-1/4 CXCXC WP TEE*2 X 1-1/4 X 1-1/2 CXCXC WP TEE* 2 X 1-1/4 X 2 CXCXC WP TEE*2 X 1-1/2 X 1/2 CXCXC WP TEE* 2 X 1-1/2 X 3/4 CXCXC WP TEE*2 X 1-1/2 X 1 CXCXC WP TEE* 2 X 1-1/2 X 1-1/4 CXCXC WP TEE*2 X 1-1/2 X 1-1/2 CXCXC WP TEE* 2 X 1-1/2 X 2 CXCXC WP TEE*2 X 2 X 1/2 CXCXC WP TEE* 2 X 2 X 3/4 CXCXC WP TEE*2 X 2 X 1 CXCXC WP TEE* 2 X 2 X 1-1/4 CXCXC WP TEE*2 X 2 X 1-1/2 CXCXC WP TEE* 2-1/2 CXCXC WP TEE*2-1/2 X 1/2 X 2-1/2 CXCXC WP TEE* 2-1/2 X 3/4 X 1-1/2 CXCXC WP TEE*2-1/2 X 3/4 X 2-1/2 CXCXC WP TEE* 2-1/2 X 1 X 1-1/4 CXCXC WP TEE*



2-1/2 X 1 X 1-1/2 CXCXC WP TEE* 2-1/2 X 1 X 2 CXCXC WP TEE*2-1/2 X 1 X 2-1/2 CXCXC WP TEE* 2-1/2 X 1-1/4 X 1-1/4CXCXC WP TEE*2-1/2 X 1-1/4 X 1-1/2 CXCXC WP TEE* 2-1/2 X 1-1/4 X 2 CXCXC WP TEE*2-1/2 X 1-1/4 X 2-1/2 CXCXC WP TEE* 2-1/2 X 1-1/2 X 1 CXCXC WP TEE*2-1/2 X 1-1/2 X 1-1/4 CXCXC WP TEE* 2-1/2 X 1-1/2 X 1-1/2 CXCXC WP TEE*2-1/2 X 1-1/2 X 2 CXCXC WP TEE* 2-1/2 X 1-1/2 X 2-1/2 CXCXC WP TEE*2-1/2 X 2 X 1/2 CXCXC WP TEE* 2-1/2 X 2 X 3/4 CXCXC WP TEE*2-1/2 X 2 X 1 CXCXC WP TEE* 2-1/2 X 2 X 1-1/4 CXCXC WP TEE*2-1/2 X 2 X 1-1/2 CXCXC WP TEE* 2-1/2 X 2 X 2 CXCXC WP TEE*2-1/2 X 2 X 2-1/2 CXCXC WP TEE* 2-1/2 X 2-1/2 X 1/2 CXCXC WP TEE*2-1/2 X 2-1/2 X 3/4 CXCXC WP TEE* 2-1/2 X 2-1/2 X 1 CXCXC WP TEE*2-1/2 X 2-1/2 X 1-1/4 CXCXC WP TEE* 2-1/2 X 2-1/2 X 1-1/2 CXCXC WP TEE*2-1/2 X 2-1/2 X 2 CXCXC WP TEE* 3 CXCXC WP TEE*3 X 3/4 X 3 CXCXC WP TEE* 3 X 1 X 3 CXCXC WP TEE*3 X 1-1/4 X 3 CXCXC WP TEE* 3 X 1-1/2 X 1-1/4 CXCXC WP TEE*3 X 1-1/2 X 1-1/2 CXCXC WP TEE* 3 X 1-1/2 X 2-1/2 CXCXC WP TEE*3 X 1-1/2 X 3 CXCXC WP TEE* 3 X 2 X 1/2 CXCXC WP TEE*3 X 2 X 1 CXCXC WP TEE* 3 X 2 X 1-1/4 CXCXC WP TEE*3 X 2 X 1-1/2 CXCXC WP TEE* 3 X 2 X 2 CXCXC WP TEE*3 X 2 X 2-1/2 CXCXC WP TEE* 3 X 2 X 3 CXCXC WP TEE*3 X 2-1/2 X 3/4 CXCXC WP TEE* 3 X 2-1/2 X 1 CXCXC WP TEE*3 X 2-1/2 X 1-1/4 CXCXC WP TEE* 3 X 2-1/2 X 1-1/2 CXCXC WP TEE*3 X 2-1/2 X 2 CXCXC WP TEE* 3 X 2-1/2 X 2-1/2 CXCXC WP TEE*3 X 2-1/2 X 3 CXCXC WP TEE* 3 X 3 X 1/2 CXCXC WP TEE*3 X 3 X 3/4 CXCXC WP TEE* 3 X 3 X 1 CXCXC WP TEE*3 X 3 X 1-1/4 CXCXC WP TEE* 3 X 3 X 1-1/2 CXCXC WP TEE*3 X 3 X 2 CXCXC WP TEE* 3 X 3 X 2-1/2 CXCXC WP TEE*4 CXCXC WP TEE* 4 X 1-1/2 X 3 CXCXC WP TEE*4 X 2 X 2 CXCXC WP TEE* 4 X 2 X 3 CXCXC WP TEE*4 X 2-1/2 X 2-1/2 CXCXC WP TEE* 4 X 2-1/2 X 3 CXCXC WP TEE*4 X 3 X 2 CXCXC WP TEE* 4 X 3 X 2-1/2 CXCXC WP TEE*4 X 3 X 3 CXCXC WP TEE* 4 X 4 X 1/2 CXCXC WP TEE*4 X 4 X 3/4 CXCXC WP TEE* 4 X 4 X 1 CXCXC WP TEE*4 X 4 X 1-1/4 CXCXC WP TEE* 4 X 4 X 1-1/2 CXCXC WP TEE*4 X 4 X 2 CXCXC WP TEE* 4 X 4 X 2-1/2 CXCXC WP TEE*4 X 4 X 3 CXCXC WP TEE* 5 X 5 X 2 CXCXC WP TEE*



2-1/2 CXFE CP UNION* 2-1/2 CXC CP UNION*2 CXM CP UNION* 2-1/2 C X M CP UNION*3 CXC CP UNION* 3/4 CXM CP UNION ELBOW 3/4 CXC WP UNION* 1 CXC WP UNION*1-1/4 CXC WP UNION* 1-1/2 C X C WP UNION*1/2 C X FE WP UNION* 3/4 C X FE WP UNION*1 C X FE WP UNION* 2 CXC WP UNION*1-1/4 C X FE WP UNION* 1-1/2 C X FE WP UNION*2 C X FE WP UNION* 1/2 C X M WP UNION*3/4 C X M WP UNION* 1 C X M WP UNION*1-1/4 C X M WP UNION* 1-1/2 C X M WP UNION*2 C X M WP UNION*

1-1/4 CXC CD P-TRAP BODY N/CO 1-1/2 C X C CD P-TRAP BODY N/CO 2 C X C CD P-TRAP BODY N/CO 3 C X C CD P-TRAP BODY N/CO 1-1/4 CD P TRAP - N/CO 1-1/4 CD P TRAP-N/CO- ELBOW 1-1/2 P TRAP - N/CO- 1-1/2 CD P TRAP-N/CO-ELBOW 2 CD P TRAP - N/CO 2 CD P TRAP-N/CO-ELBOW 3 CD P TRAP - N/CO 3 CD P TRAPS-N/CO-ELBOW 1 1/4 CD S TRAP N/CO 1 1/2 CD S TRAP N/CO 1-1/4 CD S TRAP - W/CO 1-1/2 CD S TRAP - W/CO 2 CD S TRAP W/CO 1-1/2 C X C CD P-TRAP BODY - W/CO 2 C X C CD P-TRAP BODY - W/CO 1-1/4 CD P TRAP - W/CO 1-1/4 CD P TRAP-W/CO-ELBOW 1-1/2 CD P TRAP W/CO 1-1/2 CD P TRAP-W/CO-ELBOW 2 CD P TRAP - W/CO 2 CD P TRAP-W/CO-ELBOW 3 CD P TRAP - W/CO 3 CD P TRAP-W/CO-ELBOW 3 X 6 X 1-1/2 X 1-1/2 CD DRUM TRAP 1-1/2 CD P TRAP L/CO GROUND SWIVEL 1-1/2 CD P TRAP W/CO GROUND SWIVEL

1-1/4 CXCXCXC CD DOUBLE WASTE FTG 1-1/2 CXCXCXC CD DOUBLE WASTE FTG 1-1/2 1-1/4 1-1/4 1-1/4 CXCXCXC CD DOUBLE WASTE FTG

1-1/2 1-1/4 1-1/2 1-1/2 CXCXCXC CD DOUBLE WASTE FTG

1-1/2 1-1/2 1-1/4 1-1/4 CXCXCXC CD DOUBLE WASTE FTG

2 1-1/2-1-1/4-1-1/4 CXCXCXC CD DOUBLE WASTE FTG

2 1-1/2 1-1/2 1-1/2 CXCXCXC CD DOUBLE WASTE FTG 1-1/4 CXCXC CD TY*

1-1/2 CXCXC CD TY* 1-1/2 X 1-1/4 X 1-1/4 CXCXC CD TY*1-1/2 X 1-1/4 X 1-1/2 CXCXC CD TY* 1-1/2 X 1-1/2 X 1-1/4 CXCXC CD TY*3 FTG X C X C CD TY* 3 X 3 X 1-1/4 FTGXCXC CD TY*3 X 3 X 1-1/2 FTGXCXC CD TY* 3 X 3 X 2 FTGXCXC CD TY*2 CXCXC CD TY* 2 X 1-1/4 X 1-1/4 CXCXC CD TY*

Subject Copper Pipe Fittings – Unions

Subject Copper Pipe Fittings – P-Traps

Subject Copper Pipe Fittings – DWV TY’s



2 X 1-1/4 X 1-1/2 CXCXC CD TY* 2 X 1-1/4 X 2 CXCXC CD TY*2 X 1-1/2 X 1-1/4 CXCXC CD TY* 2 X 1-1/2 X 1-1/2 CXCXC CD TY*2 X 1-1/2 X 2 CXCXC CD TY* 2 X 2 X 1-1/4 CXCXC CD TY*2 X 2 X 1-1/2 CXCXC CD TY* 1-1/2 CXCXFE CD TY*2 CXCXFE CD TY 2 X 1-1/2 X 1-1/2 CXCXF CD TY 3 CXCXC CD TY* 3 X 1-1/2 X 1-1/4 CXCXC CD TY*3 X 2 X 1-1/2 CXCXC CD TY* 3 X 3 X 1-1/4 CXCXC CD TY*3 X 3 X 1-1/2 CXCXC CD TY* 3 X 3 X 2 CXCXC CD TY*4 CXCXC CD TY* 4 X 4 X 1-1/2 CXCXC CD TY*4 X 4 X 2 CXCXC CD TY* 4 X 4 X 3 CXCXC CD TY*1-1/4 CXCXCXC CD DOUBLE TY 1-1/2 CXCXCXC CD DOUBLE TY 1-1/2 1-1/2 1-1/4 1-1/4 CXCXCXC CD DOUBLE TY 1-1/2 1-1/4 1-1/4 1-1/4 CXCXCXC CD DOUBLE TY 2 CXCXCXC CD DOUBLE TY 2 X 2 X 1-1/4 X 1-1/4 CXCXCXC CD DOUBLE TY 2 X 2 X 1-1/2 X 1-1/2 CXCXCXC CD DOUBLE TY 3 CXCXCXC CD DOUBLE TY 3 X 3 X 1-1/4 X 1-1/4 CXCXCXC CD DOUBLE TY 3 X 3 X 1-1/2 X 1-1/2 CXCXCXC CD DOUBLE TY 3 X 3 X 2 X 2 CXCXCXC CD DOUBLE TY 4 CXCXCXC CD DOUBLE TY 4 X 4 X 2 X 2 CXCXCXC CD DOUBLE TY 4 X 4X 3 X 3 CXCXCXC CD DOUBLE TY 1-1/4 CXCXCXC CD DOUBLE LONG TURN TY 1-1/2 CXCXCXC CD DOUBLE LONG TURN TY 1-1/2 1-1/2 1-1/4 1-1/4 CXCXCXC CD DLT TY 2 CXCXCXC CD DOUBLE LONG TURN TY 2 X 2 X 1-1/4 X 1-1/4 CXCXCXC CD DLT TY 2 X 2 X 1-1/2 X 1-1/2 CXCXCXC CD DLT TY 1-1/2 CXCXC LONG TURN CD TY 2 CXCXC LONG TURN CD TY 3X3X3X1-1/2 CXCXCXC SIDEOUT RH CD TY 3X3X3X1-1/2 CXCXCXC SIDEOUT LH CD TY

1-1/4 CXCXC CD 45 Y* 1-1/2 CXCXC CD 45 Y*1-1/2CX 1-1/4CX 1-1/4C CD 45 Y* 1-1/2CX 1-1/4CX 1-1/2C CD 45 Y*1-1/2CX 1-1/2CX 1-1/4C CD 45 Y* 2 CXCXC 45 CD Y*2CX 1-1/4CX 1-1/4C CD 45 Y* 2CX 1-1/4CX 1-1/2C CD 45 Y*2CX 1-1/4CX 2C CD 45 Y* 2CX 1-1/2CX 1-1/4C CD 45 Y*2CX 1-1/2CX 1-1/2C CD 45 Y* 2CX 1-1/2CX 2C CD 45 Y*2CX 2CX 1-1/4C CD 45 Y* 2CX 2CX 1-1/2C CD 45 Y*3 CXCXC CD 45 Y* 3C X 2C X 2C CD 45 Y*3CX 3CX 1-1/4C CD 45 Y* 3CX 3CX 1-1/2C CD 45 Y*3CX 3CX 2C CD 45 Y* 4 CXCXC CD 45 Y*4CX 4CX 2C CD 45 Y* 4CX 4CX 3C CD 45 Y*1-1/4 CXCXCXC CD 45 DOUBLE Y 1-1/2 CXCXCXC CD 45 DOUBLE Y 1-1/2 1-1/2 1-1/4 1-1/4 CXCXCXC CD DOUBLE Y 2 CXCXCXC CD 45 DOUBLE Y 2 X 2 X 1-1/4 X 1-1/4 CXCXCXC CD DOUBLE Y 2 X 2 X 1-1/2 X 1-1/2 CXCXCXC CD DOUBLE Y 3 CXCXCXC CD 45 DOUBLE Y 3 X 3 X 1-1/2 X 1-1/2 CXCXCXC CD DOUBLE Y

Subject Copper Pipe Fittings – DWV Y’s



5 CP TUBE END CAP* 6 CP TUBE END CAP*1-1/2 CXC/O CD TUBE END CLEANOUT* 3 CD CXC/O TUBE END CLEANOUT*3 FTGXC/O CD CLEANOUT - FLUSH TYPE* 4 FTGXC/O CD CLEANOUT - FLUSH TYPE*1-1/4 FTGXC/O CD CLEANOUT - FULL PLUG* 1-1/2 FTGXC/O CD CLEANOUT - FULL PLUG*2 FTGXC/O CD CLEANOUT - FULL PLUG* 3 FTGXC/O CD CLEANOUT - FULL PLUG*4 FTGXC/O CD CLEANOUT - FULL PLUG* 1-1/4 CXCXCO CD LINE CLEANOUT 1-1/2 CXCXCO CD LINE CLEANOUT 2 CXCXCO CD LINE CLEANOUT 3 CXCXCO CD LINE CLEANOUT 4 CXCXCO CD LINE CLEANOUT 1-1/2 CXCXCO CLEANOUT-FULL PLUG 2 CXCXCO CD CLEANOUT - FULL PLUG 3 CXCXCO CD CLEANOUT - FULL PLUG 1-1/4 CXCO WD TUBE END CLEANOUT*1-1/2 CXCO WD TUBE END CLEANOUT* 2 CXCO WD TUBE END CLEANOUT*3 CXCO WD TUBE END CLEANOUT* 1-1/4 WD FLUSH FTGXCO CLEANOUT*1-1/2 FTGXCO WD CLEANOUT-FLUSH TYPE* 1-1/2 X 1 FTGXCO WD CLEANOUT - FLUSH*2 FTGXCO WD CLEANOUT-FLUSH TYPE* 1-1/4 FTGXCO WD CLEANOUT FULL PLUG*1-1/2 FTGXCO WD CLEANOUT FULL PLUG* 2 FTGXCO WD CLEANOUT FULL PLUG*

Subject Copper Pipe Fittings – Caps and Cleanouts



Associated Firms: Firms that are related to each other in any manner other than through an arm’s length (independent)customer/supplier relationship. For example, firms are associated or related if an officer or director of one firmis an officer or director of the other, if a firm directly or indirectly owns, holds or controls shares of the otherfirm, or if a firm is the exclusive distributor for another firm.

Direct Employment: Labour costs of employees whose tasks can be readily traced (by observation) to the production of copper pipefittings are properly considered direct labour costs in the firm’s statement of cost of goods manufactured forcopper pipe fittings.

Ex-factory Value: The price a manufacurer charges a buyer for products purchased directly from the factory. This does not includeshipping, handling or taxes.

Indirect Employment: Includes plant personnel such as supervisors, superintendents and quality control employees, but does notinclude sales and administrative personnel.

Net DeliveredPurchase Value:

The net delivered purchase value is the laid-in cost net of all cash, quantity or deferred discounts, allowances,taxes, rebates and incentives, whether or not shown on the invoice. However, it includes delivery costs (freight,handling and insurance) to your Canadian warehouse and, where applicable, all import costs such as customsand other duties, brokerage fees and surcharges.

Net DeliveredSelling Value:

The net delivered selling value includes sales to a third party or an affiliate. It is net of all cash, quantity ordeferred discounts, allowances and taxes whether or not shown on the invoice. These discounts, allowancesand taxes include, but are not limited to, discounts and cash discounts, rebates and incentives. However, itincludes all delivery costs (freight, handling and insurance) incurred by your firm from the point of directshipment in Canada and included in the selling price or an estimate of such delivery costs if incurred by yourcustomers.

Net Sales Value: The amount of sales generated by a company after the deduction of returns, allowances for damaged or missing goods and any discounts, rebates and incentives offered. The sales number reported on a company's financial statements is a net sales number, reflecting these deductions.

Period of Review: This expiry review covers the period from January 1, 2013 to March 31, 2016.

Practical Plant Capacity: This is the greatest level of output from the machinery and equipment used in the production of copper pipefittings that your plants can achieve on a continuous basis within the framework of a realistic work pattern.Consideration should be given to the typical product mix, number of shifts per day, annual operating days, etc.,over the past five years.

GLOSSARY



(Please select one response from the pull down menu.)

If yes, please complete this page and all parts of this questionnaire. If no, please return only this completed page as per the directives provided in the yellow "Introduction" tab.

Firm Name: (in English and French, if applicable)Firm Address:

Telephone Number:Fax Number:

E-mail Address:Web Site Address:

Signature of Authorized Official

Name of Authorized Official

Title of Authorized Official

E-mail Address Web Site Address

CERTIFICATION

During the period of review (January 1, 2013, to March 31, 2016), did your firm produce copper pipe fittings or import copper pipe fittings from any subject or non-subject country?

The undersigned certifies that the information herein supplied is complete and correct to the best of his/her knowledge and belief.

Date

Telephone

Fax



P1. Please indicate, by checking the appropriate boxes, your firm's activities respecting copper pipe fittings for each of the periods specified.

Please answer this question by completing Schedule 1 in the blue "Firm Activities" tab.

P2. Please indicate to which trade levels your firm sells copper pipe fittings in Canada.

Master DistributorsWholesalers/DistributorsEnd Users (i.e. OEMs, Contractors)/RetailersOthers Please specify

P3.

i) Firm Name:Firm Address:Percent Share of Ownership:

ii) Firm Name:Firm Address:Percent Share of Ownership:

iii) Firm Name:Firm Address:Percent Share of Ownership:

P4.

i) Firm Name:Firm Address:Percent Share of Ownership:

ii) Firm Name:Firm Address:Percent Share of Ownership:

iii) Firm Name:Firm Address:Percent Share of Ownership:

Information requested in this part is public or non-confidential. If the response to any question would divulge confidential business information, provide a redacted version for the public/non-confidential record and a complete version that will be placed on the confidential record.

Note: In order to preserve formatting, when copying information into an existing cell, please double click into the destination cell then paste the text. PLEASE DO NOT EXCEED 1,000 CHARACTERS PER CELL, there are comment sections should you require additional cells for reponses.

PART I - PUBLIC INFORMATION

If your firm wholly or partly owns other firms involved in any manner with copper pipe fittings, whether upstream or downstream, please list their names and addresses, and indicate the extent of your firm’s ownership or interest in those firms.

If your firm is wholly or partly owned by other firms involved in any manner with copper pipe fittings, whether upstream or downstream, please list the names and addresses of these firms, and indicate the percent share of ownership or interest that they hold.



P5.

i) Firm Name:Firm Address:Nature of Association:Role in the Industry :

ii) Firm Name:Firm Address:Nature of Association:Role in the Industry :

iii) Firm Name:Firm Address:Nature of Association:Role in the Industry :

P6. Please provide details of any change in the majority ownership structure of your firm from January 1, 2013, to March 31, 2016.

P7.

Pressure Copper Pipe Fittings: WroughtPressure Copper Pipe Fittings: CastDWV Copper Piper Fittings: WroughtDWV Copper Piper Fittings: Cast

P8. If your firm permanently closed, shut down or otherwise disposed of any plants or product lines, discontinued any processes affecting its production of copper pipe fittings or made any significant asset disposals since January 1, 2013, please indicate the action taken and the date, location and reasons for such action.

P9. How does your firm price copper pipe fittings in the Canadian market? Please explain any firm-specific terms used.

P10. Please describe your firm's channels of distribution as they pertain to copper pipe fittings. If these channels have changed since January 1, 2013, please explain.

P11. Please describe the trend in the prices of raw material used to manufacture copper pipe fittings, since January 1, 2013. Please also provide, to the best of your knowledge, any trend to be expected in the future or forecasts concerning the prices of raw material used to manufacture copper pipe fittings.

P12. Please describe the current state and forecasts of the Canadian and world markets for copper pipe fittings. Also, please provide any documents, or the names of any documents, such as studies or articles in trade journals, that support your firm's statement.

If your firm is associated in any manner with other domestic producers, importers, foreign producers, exporters, distributors, suppliers of raw materials used to manufacture copper pipe fittings, or customers that buy copper pipe fittings, either in Canada or elsewhere in the world, please list their names and addresses, and indicate the nature of the association and their role in the industry. Please refer to the definition of "Associated Firms" in the yellow "Glossary" tab.

Please indicate your firm's production capabilities for the products listed below.



P13. A) Does your firm sell or use wrought copper pipe fittings as substitutes for cast copper pipe fittings?

If yes, please indicate your reasons for doing so.

To what extent are wrought copper pipe fittings substitutable for cast copper pipe fittings? Please note any limitations or exceptions.

B) Does your firm sell or use cast copper pipe fittings as substitutes for wrought copper pipe fittings?

If yes, please indicate your reasons for doing so.

To what extent are cast copper pipe fittings substitutable for wrought copper pipe fittings? Please note any limitations or exceptions.

P14. If your firm published an annual report to shareholders in each year since 2013, please provide either a photocopy-ready copy or an electronic copy of each one.



2013 2014 2015 Jan. 1 - Mar. 31, 2015

Jan. 1 - Mar. 31, 2016

ProductionPressure Copper Pipe Fittings: WroughtPressure Copper Pipe Fittings: CastDWV Copper Piper Fittings: WroughtDWV Copper Piper Fittings: Cast

Imports from subject countries:China

Pressure Copper Pipe Fittings: WroughtPressure Copper Pipe Fittings: CastDWV Copper Piper Fittings: WroughtDWV Copper Piper Fittings: Cast

KoreaPressure Copper Pipe Fittings: WroughtPressure Copper Pipe Fittings: CastDWV Copper Piper Fittings: WroughtDWV Copper Piper Fittings: Cast

United StatesPressure Copper Pipe Fittings: WroughtPressure Copper Pipe Fittings: CastDWV Copper Piper Fittings: WroughtDWV Copper Piper Fittings: Cast

Imports from non-subject countries:Other Countries:Please list the other countries from which your firm imported during the period of reviewCountry:Country:Country:Country:Country:

Export Activity

Should your firm wish to add any comments related to the firm's activities, you may do so below:

Schedule 1 (Question P1) - Firm's Activities During the Period of Review



steel grating

Question number:

Question number:

Question number:

Question number:

PUBLIC INFORMATION COMMENTS

Information requested in this part is public. If the response to any question would divulge confidential business information, provide a redacted version and a complete version to be placed on the confidential record.

Should your firm wish to add any comments related to the Public Information questions, you may do so below. Please be sure to indicate the question being commented on.

CONFIDENTIAL COPPER PIPE FITTINGSRR-2015-003


steel grating

SUPPLY AND DISPOSITION

DOMESTIC PRODUCTION

C1. Please provide the following with respect to your firm's domestically produced copper pipe fittings: beginning inventory, production, domestic and export sales and ending inventory. Please ensure that you include all sales to any associated Canadian and foreign firms that you reported in response to questions P3 to P5.

Please answer this question by completing Schedule 2 in the applicable green "Domestic" tabs.

C2. Please describe the method used to value the inventories reported in Schedule 2 in the green "Domestic" tab. Were there any changes in the method of valuation over the period from January 1, 2013, to March 31, 2016? Please provide details of any major write downs of inventory over the period.

C3. Does the average volume of inventories of copper pipe fittings normally carried by your firm vary according to the time of the year? If the typical volume of inventory that your firm maintains changed significantly during the period from January 1, 2013, to March 31, 2016, please indicate by how much and the reasons for this change. Has this, in any way, affected your firm's ability to supply its customers?

IMPORTS

C4. Please provide the following with respect to your firm's imports of copper pipe fittings: beginning inventory, imports, domestic and export sales, and ending inventory. Please ensure that you include all sales to any associated Canadian and foreign firms that you reported in response to questions P3 to P5.

Please answer this question by completing Schedule 3 in the applicable green "Imports" tabs.

C5.

Pressure Copper Pipe Fittings: WroughtCost of Goods Purchased %Duties %Freight Costs %Other %Total 0%Pressure Copper Pipe Fittings: CastCost of Goods Purchased %Duties %Freight Costs %Other %Total 0%

PART II - CONFIDENTIAL INFORMATION

Information requested in this part is considered to be confidential in nature and will be treated as such, in accordance with sections 43 to 49 of the Canadian International Trade Tribunal Act.

For your firm's imports of copper pipe fittings, please indicate the percentage associated with the following components of your net delivered selling price by each category.



DWV Copper Piper Fittings: WroughtCost of Goods Purchased %Duties %Freight Costs %Other %Total 0%DWV Copper Piper Fittings: CastCost of Goods Purchased %Duties %Freight Costs %Other %Total 0%

If your firm's costs differ by port of entry, please provide a brief explanation as to how much the costs differ and why.

GENERAL

C6. Please describe the method used to determine the value of your firm's sales of copper pipe fittings to associated firms, in Canada and/or outside Canada.

C7. What are your firm's plans for exports of copper pipe fittings in the next 12-18 months?

CAPACITY, CAPACITY UTILIZATION, EMPLOYMENT, HOURS WORKED AND WAGES PAID

C9. Please provide your firm's practical plant capacity for copper pipe fittings and its domestic production of copper pipe fittings.

Please answer this question by completing the relevant rows of Schedule 4 in the green "Capacity" tab.

Please note that your firm's domestic production data for copper pipe fittings will be automatically generated from

the green "Domestic" tabs.

C10. Please explain in detail how you measure practical plant capacity as reported in your firm's response to the previous question. Is it by weight, by number of pieces produced or by any other measure? Where capacity has increased, please explain how this was achieved (e.g. purchase of new equipment, new production process, change in plant layout).

C11. Please provide the total volume of other products produced on the same equipment used to produce copper pipe fittings.

Please answer this question by completing the relevant rows of Schedule 4 in the green "Capacity" tab.

C12. What other products, if any, can be produced with the same machinery and equipment used in the production of copper pipe fittings?

C13. Please provide your firm's employment, hours worked and wages paid with regard to the production of copper pipe fittings.

Please answer this question by completing Schedule 5 in the green "Employment" tab.



C14.

i) 2013

ii) 2014

iii) 2015

iv) Jan 1 - Mar 31, 2016

FINANCIAL

TOTAL FIRM

C15. Please submit audited financial statements for your total firm for each fiscal year during the period of review. If audited statements are not normally prepared, please provide the equivalent unaudited statements.

Submit as an electronic attachment.

C16. Please complete the income statement for your total firm. This statement is to be prepared using a full absorption costing method and is to be reported on a calendar-year basis.

Please answer this question by completing Schedule 6 in the green "Total Firm" tab.

SPECIFIC TO COPPER PIPE FITTINGS

C17. Please complete the statement of cost of goods manufactured and the income statement for your firm's domestic and export sales of copper pipe fittings produced in Canada. These statements are to be prepared using a full absorption costing method and are to be reported on a calendar-year basis.In addition, please submit copies of the working papers used to prepare the allocations for 2015 and copies of supporting source documents (or summary reports). If the methodology used to prepare the statements for earlier years is significantly different, also submit copies of the working papers and supporting documents for those years and indicate the differences.

Please answer this question by completing Schedules 7 and 8 in the green "Financial" tab.

Please note that, in Schedule 8, your firm's domestic and export sales volume data will be automatically generated from Schedule 2 in the green "Domestic" tab, and the cost

of goods manufactured for your firm's domestic and export sales will be automatically generated from

Schedule 7 in the green "Financial" tab.

C18. Please report the annual average unit cost of each of the major material components used in the domestic production of copper pipe fittings since January 1, 2015. In the last column, please provide the percentage of the total direct material cost reported in 2015 that each major material component listed represents.

Please answer this question by completing Schedule 9 in the green "Material" tab.

C19. Please report your firm’s actual investments in plant facilities for copper pipe fittings since January 1, 2015, and projected investments.

Please answer this question by completing Schedule 10 in the green "Investments" tab.

For each year during the period of review, please identify any events (such as reduced hours of work, layoffs, strikes and plant shutdowns/closures other than holidays), that affected your firm's production of copper pipe fittings. In addition, for each event, please identify the type of event, the number of employees affected and the duration.



PRICING

C20. With regard to your firm's price lists covering copper pipe fittings, for the period from January 1, 2013, to the present, please provide details relating to terms, discounts, allowances, rebates and incentives or other considerations which had the effect of reducing the cost of the goods to the purchaser. Please explain your firm's method for determining the selling price (e.g. volume discounts, rebates, preferred customer rates). On average, what is the overall discount percentage provided by your firm?

C21. If your firm does not have price lists, explain its mechanism for calculating prices of copper pipe fittings. How frequently are price adjustments made (daily, weekly, monthly)? Furthermore, please provide details of your firm's price offers for copper pipe fittings to the Canadian market and of those that were realized. If significant price variations exist, please explain. Have your firm's pricing practices changed since January 1, 2013?

C22. Do you receive discounts on your imports? If so, what are they based on (e.g. volume discounts, rebates, preferred customer rates)? On average, what is the overall discount percentage received by your firm?

C23. Please provide a brief explanation of the methodology your firm uses to calculate pricing, terms of billing, payment, delivery mode and schedule, etc. Include any information that would be relevant to how freight is treated by your firm (including calculation) for both sales and imports.

C24. Does the direction (i.e. east to west) in which you ship copper pipe fittings affect the pricing of freight? If so, please explain.

C25. How would you describe the freight component relative to the total selling price of copper pipe fittings? Do all suppliers of copper pipe fittings charge for freight? Please add any other information you can provide with regard to the freight component of price.

C26. If you typically price freight in terms of pieces rather than weight, please provide your method of estimating the cost of freight and an approximate percentage freight component per piece.

FREIGHT COSTS



C27.

Top Account 1:Address of Business:Contact Person:Telephone:E-mail:





C28. Please provide forecasts based on the various scenarios presented by indicating how each scenario would impact your firm's sales volumes, import volumes, pricing, net margin and average costs (increase, decrease or no change) and provide a percentage showing the impact.

Please answer this question by completing Schedule 11 in the green "Forecasts" tab.

C29.

Note: These specific plans and forecasts may already be in the form of business plans or equivalent documents used by your firm. If these types of documents are readily available, you may submit them in lieu of the above. You are not required to provide your firm’s plans and forecasts dealing with products or activities other than copper pipe fittings.

Please provide any documents, plans, forecasts, market analyses or other information setting out your firm’s strategies and objectives, for the years 2016 and 2017, concerning copper pipe fittings it produces and other products it makes on the same equipment.

Please provide the rationale and assumptions underlying any plans and forecasts, and indicate whether the plans and forecast were prepared internally or by an outside consultant.

TOP ACCOUNTS

Please specify your firm's top five accounts during the period of review in the corresponding cells.



Schedule 2 (Question C1) - Inventories, Domestic Production and Sales of Domestically Produced Copper Pipe Fittings

Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016

Beginning Inventory From Domestic ProductionVolume (Pieces) - - - -

Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -

Domestic Production Volume (Pieces)For Domestic SalesFor Export Sales

Total Domestic Production Volume - - - - -

Domestic Sales From Domestic ProductionSales to Master DistributorsVolume (Pieces)Ex-factory Value (FOB) (CAD$)Ex-factory Average Unit Value (CAD$/Piece) - - - - -

Net Delivered Selling Value (CAD$)Average Selling Unit Value (CAD$/Piece) - - - - -

Actual or Estimated Delivery Cost (%)

Sales to Wholesalers/DistributorsVolume (Pieces)Ex-factory Value (FOB) (CAD$)Ex-factory Average Unit Value (CAD$/Piece) - - - - -



Sales to End Users (i.e. OEMs, Contractors)/RetailersVolume (Pieces)Ex-factory Value (FOB) (CAD$)Ex-factory Average Unit Value (CAD$/Piece) - - - - -



Export Sales From Domestic ProductionVolume (Pieces)Net Delivered Selling Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -


Ending Inventory From Domestic ProductionVolume (Pieces)Value (CAD$)Average Unit Value (CAD$/Pieces) - - - - -

Calculated Ending Inventory Volume (Pieces) - - - - -

Difference - - - - -

CATEGORY 1: PRESSURE COPPER PIPE FITTINGS: WROUGHT

If your firm's actual ending inventory that you indicated at line 56 differs from the calculated ending inventory at line 60 (calculated using the formula "ending inventory = beginning inventory + production - domestic sales - export sales") please explain the reasons for the difference.

Should you need more space, please use the green "Confidential Info. Comments" tab.




Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016



















CATEGORY 2: PRESSURE COPPER PIPE FITTINGS: CAST






Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016



















CATEGORY 3: DWV COPPER PIPE FITTINGS: WROUGHT






Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016



















CATEGORY 4: DWV COPPER PIPE FITTINGS: CAST





Schedule 3 (Question C4) - Inventories, Imports and Sales of Imports of Copper Pipe Fittings

Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016

Beginning Inventory of ImportsVolume (Pieces) - - - -


Imports From:ChinaVolume (Pieces)Volume (Pounds)Net Delivered Purchase Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -

Average Unit Value (CAD$/Pound) - - - - -


KoreaVolume (Pieces)Volume (Pounds)Net Delivered Purchase Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -



United StatesVolume (Pieces)Volume (Pounds)Net Delivered Purchase Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -



Other CountriesTop Country 1 by Volume. Please specify countryVolume (Pieces)Volume (Pounds)Net Delivered Purchase Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -



Top Country 2 by Volume. Please specify countryVolume (Pieces)Volume (Pounds)Net Delivered Purchase Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -



All Other Countries. Please Specify countriesVolume (Pieces)Volume (Pounds)Net Delivered Purchase Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -







Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016


Domestic Sales of Imports

ChinaVolume (Pieces)Net Delivered Selling Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -


KoreaVolume (Pieces)Net Delivered Selling Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -


United StatesVolume (Pieces)Net Delivered Selling Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -


Other CountriesTop Country 1 by Volume. Please specify countryVolume (Pieces)Net Delivered Selling Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -


Top Country 2 by Volume. Please specify countryVolume (Pieces)Net Delivered Selling Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -


All Other Countries. Please Specify countriesVolume (Pieces)Net Delivered Selling Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -








To Master Distributors:

To Distributors/Wholesalers:




Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016




















To End Users (i.e. OEMs, Contractors)/Retailers:




Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016


Export Sales of Imports All Countries Combined (subject and non-subject)

Volume (Pieces)Net Delivered Selling Value (CAD$)Average Unit Value (CAD$/Piece) - - - - -


Ending Inventory of ImportsVolume (Pieces)Value (CAD$)Average Unit Value (CAD$/piece) - - - - -


Difference (*) - - - - -

(*) If your firm's actual ending inventory that you provided at line 193 differs from the calculated ending inventory at line 197 (calculated using the formula "ending inventory = beginning inventory + imports - domestic sales - export sales") please explain the reasons for the difference.




Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016

























Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016


























Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016
























Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016












Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016

























Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016


























Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016
























Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016












Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016

























Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016


























Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016
























Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016











Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016

Total Practical Plant Capacity (Pieces)

Domestic Production (Pieces)of Copper Pipe Fittings - - - - -

of Other Products(produced using the same equipment)

Capacity Utilization Rate (%)Domestic Productionof Copper Pipe Fittings 0% 0% 0% 0% 0%

of Other Products 0% 0% 0% 0% 0%

(produced using the same equipment)

Total Capacity Utilization Rate 0% 0% 0% 0% 0%

Schedule 4 (Questions C9 and C11) - Total Practical Plant Capacity, Domestic Production and Capacity Utilization Rate



Schedule 5 (Question C13) - Employment, Hours Worked and Wages Paid for Copper Pipe FittingsJan. 1 - Mar. 31, Jan. 1 - Mar. 31,

2013 2014 2015 2015 2016

Number of EmployeesDirect EmploymentIndirect Employment

Total - - - - -

Hours Worked (000)Direct EmploymentIndirect Employment

Total - - - - -

Wages Paid (CAD$000)Direct EmploymentIndirect Employment

Total - - - - -



Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016

Net Sales Value

Cost of Goods SoldGross Margin (Loss) - - - - -

General, Selling and Administrative ExpensesFinancial ExpensesNet Income (Loss) Before Taxes - - - - -

(CAD$)Schedule 6 (Question C16) - Income Statement for Total Firm



Schedule 7 (Question C17) - Cost of Goods Manufactured for Domestically Produced Copper Pipe Fittings

Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016

For Domestic Sales

Volume (Pieces) - - - - - Beginning Inventory of Goods in Process

Direct Materials UsedScrap Recovery

Actual Direct Materials Used - - - - - Direct LabourFactory OverheadLess: Ending Inventory of Goods in Process

Cost of Goods Manufactured - - - - -

For Export SalesVolume (Pieces) - - - - -

Beginning Inventory of Goods in ProcessDirect Materials UsedScrap Recovery

Actual Direct Materials Used - - - - - Direct LabourFactory OverheadLess: Ending Inventory of Goods in Process

Cost of Goods Manufactured - - - - -

Please describe your firm's methods of allocating costs to determine the direct materials and factory overhead used for copper pipe fittings. Specifically, List the types of costs, the method of allocation used and whether the method of allocation was used for all periods. Further, were there any circumstances/items affecting these costs during the period of review?



Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,2013 2014 2015 2015 2016

Sales in CanadaVolume (Pieces) - - - - - Net Sales Value (CAD$)Net Delivered Value (CAD$) - - - - -

Cost of Goods Sold:Beginning InventoryPlus: Cost of Goods Manufactured - - - - - Less Ending Inventory

Total Cost of Goods Sold - - - - - Gross Margin (or Loss) - - - - - General, Selling and Administrative ExpensesFinancial ExpensesNet Income (Loss) Before Taxes - - - - -

Export SalesVolume (Pieces) - - - - - Net Sales Value (CAD$)Net Delivered Value (CAD$) - - - - -

Cost of Goods Sold:Beginning InventoryPlus: Cost of Goods Manufactured - - - - - Less Ending Inventory

Total Cost of Goods Sold - - - - - Gross Margin (Loss) - - - - - General, Selling and Administrative ExpensesFinancial ExpensesNet Income (Loss) Before Taxes - - - - -

Please describe your firm's methods of allocating expenses to determine the general, selling and administrative expenses and financial expenses. Specifically, please list the types of expenses, the method of allocation used and whether the method of allocation was used for all periods. Further, were there any exceptional circumstances/items affecting these expenses during the period of review?

Schedule 8 (Question C17) - Income Statement for Domestically Produced Copper Pipe Fittings



Schedule 9 (Question C18) - Average Unit Costs of Major Material Components for Domestically Produced Copper Pipe Fittings

Jan. 1 - Mar. 31, Jan. 1 - Mar. 31,

Cost as a Percentage of Total Direct Cost of Materials

Material Component Unit of Measure2 2013 2014 2015 2015 2016 Reported for 2015

Copper TubeOctagonal TubeOther (Please Specify)Other (Please Specify)Other (Please Specify)Other (Please Specify)Other (Please Specify)Other (Please Specify)Other (Please Specify)Other (Please Specify)

Total Direct Cost: (100%)

-

Note 2: Unit in which the material component is normally puchased (pounds, kilograms, tonnes, pieces, etc.).

(CAD$/Piece of Copper Pipe Fittings Produced)



ProjectedMajor Item of Expenditure 2013 2014 2015 2016 2017

Total - - - - -

(CAD$)Schedule 10 (Question C19) - Investments for Domestically Produced Copper Pipe Fittings



Scenario Number: 1 2 3 4 5 6 7 8

If Order Continued for: China China and Korea Korea US US and ChinaUS, China, and Korea

US and Korea N/A

AND Order Rescinded for: Korea and US US China and US China and Korea Korea N/A ChinaUS, China, and Korea

A) Domestic Sales Volumes from Domestic Production

iii) Additional Comments

B) Import Volumes


C) Pricing


D) Net Margin


E) Average Costs


ii) Percentage change

Schedule 11 (Question C27) - Forecasts for Domestic Sales Volumes, Import Volumes, Pricing, Net Margin and Average Costs

i) Impact on sales volumes


i) Impact on import volumes


i) Impact on pricing


i) Impact on net margin


i) Impact on average costs



Question number:

Question number:

Question number:

Question number:

CONFIDENTIAL INFORMATION COMMENTS

Information requested in this part is considered to be confidential in nature and will be treated as such, in accordance with sections 43 to 49 of the Canadian International Trade Tribunal Act .

Should your firm wish to add any comments related to the Confidential Information questions, you may do so below. Please be sure to indicate the question being commented on.

Documents

PUBLIC/NON-CONFIDENTIAL COPPER PIPE FITTINGS · PDF filePUBLIC/NON-CONFIDENTIAL COPPER PIPE FITTINGS RR-2015-003 PRODUCER'S QUESTIONNAIRE INTRODUCTION ... "4 cast drainage lead 8 oz