PT-1930 Performer® Illustrated Parts Manual · Introduction Page 2 PT-1930 Performer™ Illustrated Parts Manual • 9/95 When ordering parts: 1 Please furnish model number, date

Performer

Illustrated Parts Manual

Pumps and Dispensers

PT-1930

Computer Programs

All Gilbarco computer programs (including software on diskettes and within memory chips) are copyrighted by, and shall remain the property of, Gilbarco Inc. Such computer programs may also contain trade secret information. The duplication, disclosure, modification, or unauthorized use of computer programs is strictly prohibited, unless otherwise licensed by Gilbarco.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to subpart J of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this equipment.

Approvals

Underwriters Laboratories:

Gilbarco pumps and dispensers that bear the U.L. listing mark are listed under the U.L. file number MH1941.

Weights and Measures:

Gilbarco pumps and dispensers are evaluated by the National Institute of Standards and Technology (NIST) under the National Type Evaluation Program (NTEP). NIST has issued Certificates of Compliance (COC) for the following:

California Air Resources Board (CARB):

The Gilbarco approval for The Advantage motor fuel dispensers is on attachment “A.”

New York City:

The Advantage Series: NYFD C. of A. #4805.Legacy Series: NYFD C. of A. #4879.

National Quality Assurance:

Gilbarco is an ISO9001/BS5750 Part 1/EN29001 registered company, certificate number 5119.

Permissions

Gilbarco has been given permission by OPW and ASCO to use their illustrations.

Patents

Gilbarco products are manufactured or sold under one or more of the following U.S. patents.3,814,934 4,566,504 4,687,033 4,728,788 4,799,940 4,876,653 4,890,210 4,913,8134,936,445 4,938,251 4,939,730 4,986,445 5,013,434 5,029,100 5,040,577 5,083,8465,098,179 5,099,403 5,110,010 5,134,548 5,156,199 5,228,084 5,269,353 5,325,7065,345,979 5,355,915 D.262,971 D.265,092 D.316,471

Additional U.S. and foreign patents pending.

Trademarks

The following are trademarks of Gilbarco Inc.:The Advantage

MPD

Proportional Flow Control Valve

Super-Hi

VaporVac

G-SITE

MPD Pro Blender

Salesmaker

Trimline

* CRIND

Highline

MPD Precision Blender

Salesmaker Pro Blender

Ultra-Hi

InfoScreen

Transac

Dimension

Super-Hi

Legacy

This document is subject to change without notice. For information regarding Gilbarco Literature, call 910-547-5661.

Model COC #The Advantage Series 90-115-A4MPD-3 Series: AE, AL, AP, AU 87-077A2MPD-2 Series: AK 87-077A2MPD-1 Series: AF, AG, AN, AR 89-019A1H111B Series: AC 88-226A3

Model COC #Salesmaker ProBlender: AB 78-099Salesmaker Series: AM 88-129Trimline Series 91-088Dimension Series 93-081A1Legacy Series 94-027

System Executive Order #Balance Vapor Recovery G-70-52

System Executive Order VaporVac G-70-150-AB

BS5750 Part 1/EN29001 Certificate No. 5119

Introduction

Introduction

This illustrated parts manual contains information about parts for Gilbarco’s Performer™ of Pumps and Dispensers.

How to Use Your ManualThe manual is divided into the following sections:

• Model Number Breakdown• Models Available• Frame and Sheathing• Hydraulics Area

Table SetupThe tables in your manual are setup as follows:

# PartDescription

Current Part Number

Previous Part Number

Qty.

Single Unit Performer™

Diesel

PRICE PER LITER

LITERS

THIS SALE

Dual Unit Performer™

ExtraRegular

PRICE PER LITER

LITERS

THIS SALE

PRICE PER LITER

LITERS

THIS SALE

# (Item Number)Callout on illustration or number in table.

Part DescriptionDescription of part.

Current Part NumberPart is in current production at Gilbarco.

Previous Part NumberSuperseded by the current part number.

Qty. (Quantity)How many of that part is needed for assembly.Note: as req. means as required

PT-1930 Performer™ Illustrated Parts Manual • 9/95 Page 1

Introduction

When ordering parts:

1 Please furnish model number, date code and original options. These are stamped on a plate riveted to the center of the main frame base.

2 Provide the following information:• Quantity needed• Part Number• Description of part• Color and graphics and other information needed for order entry items.

Date CodesThe two letter Date Code is stamped on the serial plate before the serial number. This code states the month and year of manufacture. Please use this chart for reference when determining date codes.

Related DocumentsFor part number changes and boards that can be used as spares, use PT-1867, Modular Electronics Board Guide.

Month Codes

A = January E = May J = September

B = February F = June K = October

C = March G = July L = November

D = April H = August M = December

Year Code

B = 1993 E = 1996 H = 1999

C = 1994 F = 1997 J = 2000

D = 1995 G = 1998

®

MFG. BY GILBARCO, INC. GREENSBORO, N.C. U.S.A.

U n d e r w r i t e r s L a b o r t o r i e s I n c . L i s t e d

P o w e r O p e r a t e d D i s p e n s i n g D e v i c e F o r F l a m m a b l e L i q u i d s No. H

Serial No. Model No.5-Btn Preset

Cash/Credit PPP E/M/Totalizers Rotated Putdowns Spring Retriever Flexmast Mount VDI

F o r u s e w i t h e q u i p m e n t s p e c i f i e d i n i n s t a l l a t i o n i n s t r u c t i o n s . N . Y . F . D . C . o f A . # 4 8 0 5

JE1200

Performer™

Page 2 PT-1930 Performer™ Illustrated Parts Manual • 9/95

Model Number Breakdown

Model Number Breakdown

Performer™The following models are available.

Model Number Description

JE1000 Pump, 1-Grade, 1-Hose, Standard Flow



JEA000 Dispenser, 1-Grade, 1-Hose, Standard Flow



JE1300 Pump, 1-Grade, 1-Hose, High Flow

JE1500 Pump, 2-Grade, 2-Hose, High Flow

JEA300 Dispenser, 1-Grade, 1-Hose, High Flow




Performer™ Electronics


Plate 1 • CD (Computer Display) Module (W03565-G1)

1

23

4

5

6

7

8

9

10(See Plate 3)

11

12

13

14

16

15

17



# PartDescription

Current Part Number


Qty.

1 Keypad overlay T17855-XX - 1/ side

2 Gasket, Customer Programmable Preset R19509-01 - 1/side

3 Customer Programmable Preset Faceplate R20266-G1 - 1/side

4 PCB Pump Preset Display Assembly T17328-G1 - 1/side

5 Top Cover Assembly (Low)1 W03552-XX - 1

6 Display Window Bracket T19655-01 - as req.

7 Main Window Display N23688-01 - as req.

8 Main Window Gasket N23692-01 - 4

9 Cross Brace R20263-01 - 3

10 Motor Control Assembly (3 phase) See Plate 3 T19673-XX - 1

11 Computer Display (CD) Side Support Assembly W03567-G1 - 2

12 Conduit (See Plate 7)

13 Conduit Washer 3/4 N16599-92 - as req.

14 Conduit Nut 3/4 K93487 - as req.

15LCD Main Display 1.52 cm. (0.6”) T17701-G1 - as req.

LCD Main Display 2.54 cm (1”) T17962-G1 - as req.

16

Backlight as req.

.1” LCD assembly T17622-G6 - as req.

.6” LCD assembly (.6” reflector) T17622-G9 - as req.

1” LCD assembly (.7” reflector) T17622-G5 - as req.

17Display Mask 1.52 cm (0.6”) T19635-01 - as req.

Display Mask 2.54 cm (1”) T19636-01 - as req.



Plate 2 • CD Module Components

1

19

18

1716

15

5

4

7

6

3

2

14

13

12

11

10

9

8

20



# PartDescription

Current Part Number


Qty.

1 Customer Programmable Preset Board T17331-G3 - as req.

2 I.S. Board Cover Assembly T19639-01 - 1

3 I.S. Barrier Board T19301-G1 - 1

4 CD Lower Support Assembly W03566-01 - 1

5 CD Module Base W03565-G1 - 1

6 Conduit Washer 3/4 N16599-92 - 2

7 Conduit Nut 3/4 K93487 - 2

8 Lock and Key Assembly Q12928-02 - 1

9 Key K89699-07 1

10 Operator Keypad Bracket Assembly T19678-G1 - 1

11 Operator Keypad Bracket Gasket N23701-01 - 1

12 Voltage Select Plug

115VAC N21120-G6 - 1

220VAC N21120-G8 - 1

230VAC N21120-G9 - 1

240VAC N21120-G10 - 1

13 Fuse, F1 (3Amp, 250VAC, Slo-Blo) Q10131-03 - 1

14 Fuse Holder Q11781-01 - 1

15 Transformer 115/220-240 VAC 50/60 Hz with Backlights Q12939-02 Q12939-01- 1

16 EMI Filter 6 amp. Q10895-07 - 1

17 Foam Pad PCB Spacer N23702-02 - 2

18 Foam Pad PCB Spacer N23702-01 - 1

19 Hydraulics Interface Board T18994-G1 - 1

20 Pump Controller Board T18904-G2 - 1

21 Manager keypad (not shown) T17549-G1 - 1



Plate 3 • Motor Control Assembly

# PartDescription

Current Part Number


Qty.

1 Shield Cover Assembly T19676-G1 - 1

2 Surge Suppressor Assembly N23214-G1 - as req.

3 Motor Contractor (3 phase) R19406-03 - as req.

4 Relay Overload (3 phase) R19406-02 - as req.

5 Sems Screws 6-32 x 3/4 Q12083-18 - as req.

6 Bracket Assembly T19672-G1 - 1

7 Cable Assembly (dual) T18551-G3 - 1

Cable Assembly (single) T18551-G4 - 1

8 Cable Assembly (low voltage) R19733-G2 - 1

9 Bushing, snap “S” K85071-15 - 1

10 Motor Control Assembly T19673-xx - 1

7

8

6

5

4

9

3

2

1



Plate 4 • Electronic Cables

# PartDescription

AssociatedPlugs and Jacks

Current Part Number


Qty.

1 Logic/Main Display (1”) A1, B1, J204-A2, B2 T19571-G1 - 1

2 Logic/Main Display (.6”) J801, J204 T17768-G1 - 1

3 Backlight P302, J802A/B/C/D, WT1/2 T17766-G3 - 1

4 Controller/Interface J205, J305 R19952-G1 - 1

5 Controller/Interface J206, J306 R19939-G1 - 1

6 Controller/interface J207,J203,J901,J307 R19951-G1 - 2

7 Main DC Cable Assembly J405, J115, J407 T19675-G1 - 1

8 24 Volt Cable Assembly J308, T1 R20234-G1 - 1

9 Two-Wire Cable Assembly J208, P402 R20235-G1 - 1

10 Power Supply Cable J605, J604 T19572-G1 - 1

11 Filter to Fuse F1-2, FL1-3 R15634-G59 - 1

12 Line Filter to Ground FL1-5, E1 R15634-G114 - 1

13Pulser Conduit

J111A, J113, J27B, PHB, PHA, J27A

T19573-G1 - 1

14 Main Conduit J309, P604, J402 T19638-G1 - 1

15 Main Conduit, 3-phase J309, P604, ,P406, J402 T19638-G2 - 1

16 PPP to Controller J201, J411 R20231-G1 - 1

17 PPP to Display J412, J612 R20232-G1 - 2

18 Five-Button Preset to Controller P130A/B, J202 T19048-G2 - 1

19 Pump Stop/R19527 J131A/B, J802 T19336-G4 - 1

20 Controller/T19336 J204, P802, P204A R19527-G1 - 1

21 DC Cable, (three-phase cables) P407 R19733-G2 - 1

22 AC Cable (dual), (three-phase cables) J406, K2-T1, K2-T2, K2-T3, K1-T1, K1-T2, K1-T3, K2-L3, K2-L2, K2-L1, K1-L3, K1-L2, K1-L1

T18551-G3 - 1

23 AC Cable (single), (three-phase cables) J406, K1-T1, K1-T2, K1-T3, K1-L3, K1-L2, K1-L1

T18551-G4 - 1


Frame and Sheathing

Frame and Sheathing

Plate 5 • Frame and Sheathing

5

15

13

12

11 10 9 8 7

6

4

3

2

1

16

14


Frame and Sheathing

1 Order Entry, Customer specific item please specify color and graphics when ordering.2 Quantity as needed.3 Dispensers only.

# PartDescription

Current Part Number


Qty.

1 Side Sheathing W03569-XX - as req.

2 Top Sheathing T19656-01 - 1

3 Support Column W03568-G1 - 2

4 Sheathing Column W03564-01 - 2

5 Outer Frame Assembly W03368-G2 - 1

6 Lower Door (includes locks and keys) 1 T19334-GXX - 2

7 Inlet Support Bracket 3 W03394 - 1

8 Lower Frame Assembly W03367-G1 - 1

9 Pump and Motor Support Plate (Pumps only) W03381-G1 - 1

10 Tee Bolt 5/16-18” x 3/4” 3 K83759-20 - 2

11 Key 2 K83512-25 - 2

12 Panel Lock 2 K83512-30 - 2

13 Washer, Nylon 2, K83513-10 - 2

14 Cam, Lock 2 K93552 - 2

15 Washer, Nylon 2 K83513 - 2

16 Spring 2 K83382 - 2

17 Hex Nut 5/16-18” (not shown) 2, 3 Q11890-05 - 2

18 U-bolt 5/16-18” (not shown) 2, 3 K13204 - 2


Frame and Sheathing

Plate 6 • Nozzle Boot

# PartDescription

Current Part Number


Qty.*

1 Nozzle Hook T19670-01 - 1

2 Screw K85736-43 - 1

3 Teflon Washer K86607-05 - 1

4 Screw K50599-23 - 2

5 Screw K85736-45 - 2

6 Washer K50411-38 - 2

7 Nozzle Boot Flap N23687-01 - 1

8 Retaining Ring, 3/8” K76238-37 - 1

9 Nozzle Boot R20269-01 - 1

10 Nozzle Boot Switch Cam and Shaft Assembly N23693-G1 - 1

11 Spring K89852 - 1

12 Sem Screws Q12083-01 - 4

13 Reed Switch Proximity Magnet Q12514-01

14 Reed Switch Acutator Q12514-05 - 1

15 Nozzle Switch Bracket R20271-G1 - 1

16 Nut Q11890-03 - 1

17 Clinch stud (part of W03568-G1 column) K83677-29 - 1

* Quantity show as per nozzle hose assembly

15

14

13

12

11

1

9

8

7

5

43

2

1

12

17

6

16


Hydraulic Area

Hydraulic Area

Plate 7 • Junction Box and Conduit

17

6

2

13

5

5

2

1

12

7

8

4

3

1119

20a

14

9

16

8

18

20b

2

2

2

3

10

15

2221


Auden Lujan

P/N: N23558

Hydraulic Area

Junction Box and Conduit, Continued

1 Quantity varies with model.2 Parts are usable on other Gilbarco pumps and dispensers.

# PartDescription

Current Part Number


Qty.

1 Formed Conduit A-side Solenoid T19310 - 1

2 Conduit Elbow 1/2” x 90° MxF 1, 2 K42448 - as req.

3 Conduit Elbow 1/2” x 90° FxF 1, 2 K42428 - as req.

4 Formed Conduit B-side Solenoid R12579-130 - as req.

5 Conduit Union 1/2” MxF N16289-20 - 1

6Conduit and Wire Assembly (3-Phase) T19638-G2 - 1

Conduit and Wire Assembly (1 phase) T19638-G1 - 1

7 Conduit Union 3/4” MxF Q10016-05 - 1

8 Pipe Plug 3/4” 1, 2 K57624 K02282 as req.

9 Junction Box W03245-10 - 1

10 Solid State Relay (single-phase pumps only) 1, 2 Q11008-04 - as req.

11 Junction Box Cover W03244-10 - 1

12 Bolt 5/16-18 x7/8 Q10865-01 - 12

13 Conduit Nipple 1/2” x 1 1/2” K09228 - as req.

14 Formed Conduit A-side Motor (Pumps only) R12579-129 - 1

15 Conduit Union 1/2” FxF 1, 2 N16289-21 - 1

16 Conduit Nipple 1/2” x 3 LG K88207-02 - 1

17 Formed Conduit B-side Motor (Pumps only) R12579-128 - 1

18Varistor 110/115/120VAC 2 T17448-G1 - 1

Varistor 220/230/240VAC 2 T17448-G3 - 1

19 Pipe Plug 1/2” 1, 2 K85773 K02281 as req.

2020a20b

Junction Box Bracket

Pump T19294 - 1

Dispenser T19340 - 1

21 Junction Box Shield (electrical) T19562 - 1

22 Reducer 1/2” x 3/4” 1, 2 K49827 - as req.


Hydraulic Area

Plate 8• Hydraulic Manifold AreaQuantity shown per module

16

4

7

6

5

4

3

2

1

24

2721

4

15

4

20

18

17

11

14

13

12

9 5

9 10

98

25

24

23

23 22

19


Auden Lujan

Q10865-39 (Screw)

Hydraulic Area

Hydraulic Manifold Area, Continued

1 Dispensers only.2 Pumps only.3 Quantity as needed.4 Also used on The Advantage® and Dimension® Series.5 Common to all Gilbarco dispensers.

# PartDescription

Current Part Number


Qty.

1 T-Bolt K83759-21 - 2

2 Nut Q11890-05 - 2

3 Discharge Casting W03379-10 - 1

4 Bolt 5/16-18 x 7/8” 3 Q10865-01 - as req.

5 O-Ring 1-1/4” x 1/8” x 1-1/2” 4 Q10068-09 - 3

6 Meter see Plate 15 - 1

7 Meter Check Valve 2, 4 N23276-G1 - 1

8 Seal Plate R20072 - 1

9 O-Ring 1-5/8” x 1/8” x 1-7/8” 4 Q10068-14 - 3

10 Casting, Manifold 4 W02808-10 - 1

11 O-Ring 2-3/8” x 1/8” x 2-5/8” 4 Q10068-20 - 3

12 Solenoid Repair Kit (includes diaphragm, spring and washer) 3, 4 R19093-01 - as req.

13 Solenoid Valve R20008 - 1

14 Coil, 115VAC 3 R20008-05 - as req.

Coil, 240VAC 3 R20008-06 - as req.

15 Manifold Support Bracket T19293 - 1

16 Filter Cap (High Capacity) with gasket 4 R18896-G1 - 1

17 Fuel Collector 3, 4 K35493 - as req.

18 Filter, High Capacity 4 R18189-10 - 1

Filter, High Capacity 30 micron 4 R18189-30 - 1

Filter, High Capacity (Water Alert) 4 R20039 - 1

19 Gasket K93485 - as req.

20 Filter Strainer 4 R19457 - 1

21 Feedline One-Hose, One-Product and Two-Hose, Two-Product 2 T19290-G1 - 1

22 Feedline Two-Hose, One-Product 2 W03390-G1 - 1

23 Union 1-1/2” 1, 3 K12179 - as req.

24 Nipple 1-1/2” x 7-1/8 1, 3, 4 R11493-20 - as req.

25 Feedline Two-Hose, One-Product 1 W03391-G1 - 1

26 Feedline One-Hose, One-Product and Two-Hose, Two-Product 1 R20105-G1 - 1

Shear Valve Single Poppet (not shown) 1, 3, 5 T18802-01 - as req.


Hydraulic Area

Plate 9 • Meter • All ModelsQuantity shown per meter.

1 Common to all Gilbarco pumps and dispensers with “C” Meter.

# PartDescription

Current Part Number


Qty.

1 Quad Ring Kit (shaft seal, gasket, screws, seal wire, alignment tools) 1 K35222 - 1

2 Valve Seal O-Ring 1 N18254-04 - 1

3 Gasket and O-Ring Kit (includes cover gaskets and o-rings, flange o-rings) 1 K35359 - 1

4 Formed Piston Cup 1 N21252 - 1

5 Adjuster Cylinder Cover Kit (includes pin, packing and seal wire) 1 K35361 - 1

6 Lower Housing O-Ring 1 Q10068-14 - 1

7 Valve Seal Kit (includes retainer and valve seal) 1 K35514 - 1

8 Gilbarco C Meter

Liters (Mechanical and Commercial only) PA024TC28M - 1

Liters with Seal Wires (Mechanical and Commercial only) PA024TC29M - 1

1

2

3

7

56

4


Hydraulic Area

Plate 10 • Hose Retriever Quantity shown per hose.

1 Also used on Highline™ Series.2 Common to all Gilbarco pumps and dispensers.

# PartDescription

Current Part Number


Qty.

1 Bracket R20071 - 1

2 Hose Retriever and Cable Assembly (includes 2a-e) 1 N20545-02 - 1

2a Retriever Only 1 N16839-21 - 1

2b Washer 1/2” 1 K02208 - 1

2c Lockwasher 1/2” 1 K47433 - 1

2d Nut 1/2”-13 1 K01945 - 1

2e Cable 70” 1 K87218-01 - 1

3 Nut 1/4”-20 1 K01941 - 1

4 Hose Grommet Assembly 1 R18453 - 1

5 Hose Clamp 1” 2 N18320-21 - as req.

Inner half for 3/4” for use with N18320-21 2 N18319-04 - as req.

Inner half for 5/8” for use with N18320-21 2 K35522 - as req.

2e

4

1

5

2a

2b

2c2d

3


Hydraulic Area

Plate 11• Totalizer and PulserQuantity shown per pulser assembly.

# PartDescription

Current Part Number


Qty.

1 Retaining Ring, 3/8” K76238-37 - 1

2 Driving Gear, 62 teeth (Metric) N22953 - 1

2a Driving Gear, 32 teeth (US Gallons) K88329-01 - 1

3 Ring K76238-36 - 2

4 Driving Gear, 30 teeth (Metric) K88329-03 - 1

4a Driving Gear, 32 teeth (US Gallons) K88329 - 1

5 Flat Washer N16599-70 - 1

6 Drive Gear Shaft K89619 - 1

7 Screw Set 5-40x K76707 - 2

8 Screw, 1/4-20 x 1/2 K05287 - 1

9 Screw 5/16-18 x 3/4 K85736-43 - 1

10 Gear Bracket Assembly (Metric) T19552-G1

10a Gear Bracket Assembly (US Gallons) T19615-G1 - 1

11 Nylon Spacer Q10385-33 - 1

12 Washer, 1/4” K14056 - 2

13 Delrin Gear N20965-14 - 1

14 Reinforcing Ring, 1/2” Q10217-09 - 1

Metric

14

19

18

17

16

15

13

10

8

7

6

23 5

4

3

2

1

10a

112a

US Gallons

21

24

22

3

20

12

264a

K88329 bore holes

K88329 and K88329-03 K88329-01

9

1125

19a

9


Hydraulic Area

1 Common to many Gilbarco pumps and dispensers.

15 Flexible Shaft K89799-24 - 1

16 Cable Stablizer Assembly T19551-G1 - 1

17 Nyliner bearings K80567-31 - 3

18 Coupling K93404 - 1

19 Totalizer 7-Figure (Metric) N23712-G2 - 1

Totalizer 7-Figure (U.S. Gallons) N23712-G1 - 1

20 Stabilizer Bracket Assembly R20203 - 1

21 Hex Screw K85736-07 - 1

22 Totalizer and Bracket Assembly R20285-01 N21013 1

23 Oilite Bearing N17706-37 - 1

24 Pulser Assembly T18350-G1 - 1

25 Screw #10-32 x 3/8 Q11769-59 - 1

26 Bracket R17466-01 - 1

# PartDescription

Current Part Number


Qty.


Hydraulic Area

Plate 12 • Sump Area • All PumpsQuantity shown per assembly

1 Common to all Gilbarco pumps.2 Also used on The Advantage® and Dimension® Series pumps.

# PartDescription

Current Part Number


Qty.

1 Vent Fitting 1 N21861-02 - 1

2 Hex Nut 9/16”-24 1 Q10985-02 - 1

3 Ferrule 3/8” 1 K43260 - 2

4 Nut 3/8” 1 Q12505-01 - 2

5 Vent Tube R20084 - 1

6 Straight Fitting 3/8” Q12504-01 - 1

7 Sump Bracket R20070 - 1

8 Bolt K44046 - 1

9 Sump 2 PA0013-165 - 1

10 Elbow 2 Q10001-20 - 1

11 Elbow 2 Q10001-12 - 1

12 Return Tube T19314-G1 - 1

13 Inlet Tube T19315-G1 - 1

2

3

5

7

8

10 11

12

1

4

6

9

13

4

3


Hydraulic Area

Plate 13 • Pump and Motor Area • All PumpsQuantity shown per pump and motor.

2, 3, 4

5

7

9

10

12

13

14

15

1

6

8

11

16

18

11

17


Hydraulic Area

Pump and Motor Area • All Pumps, Continued

1 Common to many of Gilbarco pumps.2 Order Entry, Customer specific item.

# PartDescription

Current Part Number


Qty.

1 Nut 1 Q11890-05 - 2

2 Motor 3/4HP 1

110/220VAC, 50Hz, 1 phase, continuous run 1 R14213-22 - 1




380VAC, 50/60Hz, 3 phase, continuous run 1 R14213-14 - 1

3 Motor 1/2HP 1





4 Motor 1/3HP 1

115/220VAC, 50Hz, 1 phase 1 R14212-03 - 1


115/220VAC, 60Hz, 1 phase 1 R14212-02 - 1


220/380VAC, 50/60Hz, 3 phase 1 R14212-04 - 1

5 Motor Pulley 1

Pulley 500RPM 60Hz 1 R18900-21 - 1

Pulley 500RPM 50Hz 1 R18900-40 - 1

Pulley 650RPM 60Hz 1 R18900-27 - 1

Pulley 650RPM 50Hz 1 R18900-32 - 1

Pulley 800RPM 50Hz R18900-39 - 1

Pulley 800RPM 60Hz R18900-32 - 1

6 Bolt 1 K46809 - 3

7 Lock Washer 1 K20455 - 3

8 Shockmount R20069 - 2

9 Pulley Belt 1

Belt 30 -1/2”, 500RPM 60Hz 1 R06711-47 - 1

Belt 30 -1/2”, 500RPM 50Hz 1 R06711-40 - 1

Belt 31”, 650RPM 60Hz R06711-38 - 1

Belt 31-1/2”, 650RPM 50Hz 1 R06711-42 - 1

Belt 31-1/2, 800RPM 60Hz R06711-42 - 1

Belt 32-1/2, 800RPM 50Hz R06711-30 - 1

10 Bolt 1 K01904 - 1

11 Flat Washer 1 K66314 - 1

12 Idler Pulley 1 N18366-02 - 1

13 Nut 1 K01943 - 1

14 PUS Pump 1, 2 See Plate 20 - 1

15 Elbow 90° 1 Q13044-01 - 1

16 Pulley , without Hand Drive 1 R18900-69 - 1

16a Pulley, with Hand Drive 1 N23596 - 1

17 Key K83379-21 - 1

18 Key 1 Q12697-01 - 1

19 Lock Washer 1 K50775 - 1


Hydraulic Area

Plate 14 • PUS020 Pump and Air Separator • All Pumps

# PartDescription

Current Part Number


Qty.

1 Air Separator Body (1” Discharge) 1 R12512-03 - 1

2 Filter Retainer (Inner) 1 K82085-02 - 1

3 Separator Filter 1 K76193 - 1

4 Filter Retainer (Outer) 1 K82085-01 - 1

5 Seal Kit (includes 5a-e) 1 K35211 - 1

5a O-Ring 1-3/4” x 2” x 1/8” 1 Q10068-15 - 1

5b O-Ring 2-1/8” x 2-3/8” x 1/8” 1 Q10068-18 - 1

5c Separator Gasket 1 N14492 - 1

5d Pump Gasket 1 Q12508-156 - 1

5e Lip Seal 1 K82472 - 1

6 Pump Body Assembly 1 W02213-G17 - 1

7 Blade Spacer 1 K48226 - 1

8 Blade 1 K76657 - 6

Blade Kit (includes 6, 5d, 5e) 1 K35212 - 1

2

35c

7

9

18

17

16

1

4

8

20

21

23

22

25

24

5d

75e

5a

5b

14

6

13

11,12

26

10

19

15


Hydraulic Area

1 Common to all Gilbarco pumps that use the PUS Pump.

9 Rotor and Shaft Assembly 1 N17150-21 - 1

10 Screw #10-24 x 3/8” Q11560-105 - 3

11 Bolt 3/8-18” x 1” 1 K01902 - 6

12 Lockwasher 3/8” 1 K50775 - 6

13 Pump Head Assembly 1 T16604-G1 - 1

14 Flange 1-1/2” R18898-G2 - 1

15 Gasket K93124 - 1

16 Flexible Suction Assembly K91324-01 - 1

17Union 1-1/2” 1(150#) K12179 - 1

Union 1-1/2” (300#) Q10846-08 - as req.

18 Pipe Nipple 1-1/2” x 1-3/4” 1 R11493-50 - 1

19 Filter 1 N18957 - 1

20 Filter Cap 1 K45315-03 - 1

21 Relief Valve Cap 1 K48169-04 - 1

22 Relief Valve 1 N23190 - 1

23 Relief Valve Spring 1 (Standard and Econo flows) K93829 - 1

Spacer Preload (Standard Flow) K93530-02 - 2

Spring By-Pass Valve (High Flow) Q13235-01 - 1

24 Elbow 1/2” x 90° 1 Q10001-20 - 1

25 Vent Tube Assembly 1 K93520 - 1

26 Bolt 5/16-18” x 7/8” 1 Q10865-01 - 10

27 Taper Pin #6 x 1-1/4” (not shown) K41874 - 2

28a Standard Flow

Pump and Air Separator Assembly with Flange (150#) PUS020-G478 - 1

Pump and Air Separator Assembly with Flange (3-Bolt) PUS020-G480 - 1

28b High Flow

Pump and Air Separator Assembly with Flange (150#) PUS020-G481 - 1


28c Econo Flow

Pump and Air Separator Assembly with Flange (150 #) PUS020-G484 - 1


29 Key (not shown) 1 K83779-21 - 1

# PartDescription

Current Part Number


Qty.


Hydraulic Area

Plate 15 • Hand Drive

16

15

14

13

12

1110

9

8

76

5

4

3

2

1


Hydraulic Area

1 Also used on Trimline® Series 27” frame pumps with hand drive.

# PartDescription

Current Part Number


Qty.

1 Nut Q11890-05 - 4

2 Hanger Bracket T19325-01 - 1

3 Support Bracket R20092-01 - 1

4 Hub Bracket N23569-G1 - 1

5 Flat Washer K02205 - 2

6 Bolt K85736-43 - 6

7 Belt R06711-60 - 1

8 Spacer Hand Drive N23570 - 1

9 Hand Drive Pulley (small) K78492-21 - 1

10 Bolt Q11098-10 - 2

11 Crank Assembly 1 N18539 - 1

12 Stud 1 K85561 - 1

13 Hand Drive Pulley (large) 1 R12553-01 - 1

14 Grease Fitting 1 K76145-21 - 1

15 Set Screw 1 K18719 - 1

16 Clinch Stud 15/16-18 K83677-20 - as req.


Hydraulic Area
