Upload
sambhanimadhubabu
View
221
Download
0
Embed Size (px)
Citation preview
8/13/2019 PSPICE Working
1/2
PSPICE:
1. Click on: Start Menu All Programs Pspice Student Pspice AD Student
2. Click on File menu New Text File (as shown in below figure)
3. Then you will get an empty white spaced window as follows.
4. Leave first line as empty (or) type TITLE of the program. But program should be start from 2nd
line only.
8/13/2019 PSPICE Working
2/2
5. Type the program. Program termination should be with the command .end
6. Save the file with the extension of .cir
Example: RLC CIRCUIT.cir
7. After saving the file, close the pspice and re-open it. Then u can observe that all the buttons are
highlighted.
8. Now go to simulation and click on run button (for example as follows)
9. Then simulation will be successfully done. And u can observe the things as follows.
10. So by clicking on above buttons as per your desire, u can observe input file, output file,
graphetc.
ALL THE BEST
From
k. $r!r@m
SRIRAM KARAKANA