Pryme fall prevention c&l

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00

6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599

INNOVATING

safety&wellness

SOLUTIONS

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW

SAFEWORK SITES

---NO LOOSE ENDS---

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



AUSTRALIA

NEW ZEALAND

SINGAPORE

DANGERS OF SMALL FALLING OBJECTS

FALLING OBJECTS

LARGEFALLING OBJECTS

SMALLFALLING OBJECTS

WORKERFALLS

TOOLS

PPE

PORTABLEEQUIPMENT

MATERIALS& PARTS

DEBRIS

AUSTRALIA NEW ZEALAND SINGAPORE

EMPLOYER OBLIGATIONS

This brochure provides a step-by-step guide to preventing Small Falling Objects with the latest in small falling objects prevention technologies and best industry practice.

Small falling objects pose serious hazards in the workplace. On most workplaces small objects are varied from hand held tools and equipment to small debris. Small objects are high in number and their size makes them hard to control. Even a 1kg spanner dropped from a height of 4 metres will hit the ground travelling over 30km/h.

Controlling the hazards small objects create pose a number of challenges. Without the correct controls, small falling objects can:• Cause injury and death• Damage property• Create tool damage• Damage equipment below• Lost time recovering fallen tools

Studies show that 30% of falling object incidents

arise from mechanical, technical and design

issues, whilst almost 50% occur from human error.

Workplace Safety & Health (2008) statistics show being struck by falling objects is the second most common cause of workplace fatalities in Singapore and a leading cause of workplace injuries.

In a report commissioned by the Ministry of Innovation & Employment, every year in New Zealand around 100 people die from fatal workplace injuries of which people struck by falling objects is a leading cause.

According to the Notified Fatalities Statistics Report 2009-2010, 14% of fatalities in Australian workplaces from 2004-2010 were attributed to objects falling from heights.

Sections 34-38 of the Workplace Health & Safety (WHS) Act 2011, requires employers to minimise risks where reasonably practical to employees. To help Employers comply the WHS legislation, Safe Work Australia in 2012 published the “Falling Objects Fact Sheet” that requires tools and materials to be tethered when working at heights.

According to the publication,Guidelines for the Prevention of Falls to meet the Requirement of the Health Safety in Employment Act 1992, all tools and equipment are to be attached by a cord unless another effective method is used to prevent a falling hazard. AS/NZS 4488 also requires all tools and equipment to be tethered when working at heights.

In the Code of Practice for Working Safely at Height, section 10.2.7.4 stipulates that risks of falling objects must be mitigated, small tools must be secured to the person with the use of a lanyard. The Act also requires employers not to merely follow the law but take reasonable practical steps to proactively reduce risk to Employees.

1

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



AUSTRALIA

NEW ZEALAND

SINGAPORE

DANGERS OF SMALL FALLING OBJECTS

FALLING OBJECTS

LARGEFALLING OBJECTS

SMALLFALLING OBJECTS

WORKERFALLS

TOOLS

PPE

PORTABLEEQUIPMENT

MATERIALS& PARTS

DEBRIS

AUSTRALIA NEW ZEALAND SINGAPORE

EMPLOYER OBLIGATIONS

This brochure provides a step-by-step guide to preventing Small Falling Objects with the latest in small falling objects prevention technologies and best industry practice.

Small falling objects pose serious hazards in the workplace. On most workplaces small objects are varied from hand held tools and equipment to small debris. Small objects are high in number and their size makes them hard to control. Even a 1kg spanner dropped from a height of 4 metres will hit the ground travelling over 30km/h.

Controlling the hazards small objects create pose a number of challenges. Without the correct controls, small falling objects can:• Cause injury and death• Damage property• Create tool damage• Damage equipment below• Lost time recovering fallen tools

Studies show that 30% of falling object incidents

arise from mechanical, technical and design

issues, whilst almost 50% occur from human error.

Workplace Safety & Health (2008) statistics show being struck by falling objects is the second most common cause of workplace fatalities in Singapore and a leading cause of workplace injuries.

In a report commissioned by the Ministry of Innovation & Employment, every year in New Zealand around 100 people die from fatal workplace injuries of which people struck by falling objects is a leading cause.

According to the Notified Fatalities Statistics Report 2009-2010, 14% of fatalities in Australian workplaces from 2004-2010 were attributed to objects falling from heights.

Sections 34-38 of the Workplace Health & Safety (WHS) Act 2011, requires employers to minimise risks where reasonably practical to employees. To help Employers comply the WHS legislation, Safe Work Australia in 2012 published the “Falling Objects Fact Sheet” that requires tools and materials to be tethered when working at heights.

According to the publication,Guidelines for the Prevention of Falls to meet the Requirement of the Health Safety in Employment Act 1992, all tools and equipment are to be attached by a cord unless another effective method is used to prevent a falling hazard. AS/NZS 4488 also requires all tools and equipment to be tethered when working at heights.

In the Code of Practice for Working Safely at Height, section 10.2.7.4 stipulates that risks of falling objects must be mitigated, small tools must be secured to the person with the use of a lanyard. The Act also requires employers not to merely follow the law but take reasonable practical steps to proactively reduce risk to Employees.

1


RISK CONTROLS

IDENTIFYING HAZARDS

ELIMINATION

SUBSTITUTION

ENGINEERING

ADMINISTRATIONPPE ADMINISTRATIVE

Visit www.pryme.net.au/small-falling-objects to download your Free Educational Tools

TOP CAUSES OF FALLING OBJECTS

Prior to commencing any task that requires working from heights the following steps can help identify potential small falling object hazards.

1. Look for any environmental factors such as wind, rain, drafts, heat etc.

2. Identify sources of energy that can cause falling objects for example gravity, mechanical movement, electrical, pressurised equipment and vibration.

3. Prior to starting work visually inspect the area for preexisting hazards such as debris and loose items.

4. Make sure all safety securing features are in use.5. Look for any collision or snagging hazard with fixtures

and in particular moving or rotating machinery.6. Pay special attention to corroded bolts and brackets.7. Check what controls are in place for example:

scaffolding, toe boards, barriers, netting, etc.8. Inspect all equipment and tools for damage,

attachment points, lanyards, lift buckets, ropes and tool belts.

9. Remove any loose items or equipment.

1. Inadequate risk assessment

2. Human error

3. Inadequate procedures

4. Failed fittings and hazards

5. Poor housekeeping

6. Snaggings & collisions

7. Inadequate repairs & inspections

8. Neglected & home made tools

9. Inadequately stored or secured tools & equipment

Source: Dropped Objects Awareness & Prevention: Reliable Securing. Revision 03. www.dropsonline.org

TO DOWNLOAD EDUCATIONAL TOOLS VISITWWW.PRYME.NET.AU/SMALL-FALLING-OBJECTS

When working at heights, examples to eliminate small falling object hazards include:• Leave any tools and equipment not required for the job at

ground level.• Remove debris from the work area prior to commencing work.• If there is any energy sources in the work area, such as

mechanical rotation, if possible turn them off prior to starting the job.

• If environmental conditions pose a source of danger, such as strong winds, consider rescheduling work.

Hazards can be substituted for ones that pose a lower risk. Examples include:• Consider prefabricating

components at ground level and hoist into place.

• Investigate the possibility of substituting ladders for elevated work platforms.

PPE is only to be used as a last resort to control risks, examples include:• Hard hats and steel

capped boots.• Individual fall arrest

systems, such as harnesses, lifelines, etc. For more information refer to Managing the Risk of Falls at Workplaces, Safe Work Australia (2011).

There are a number of engineering controls to minimise risks of falling objects, examples include:• Temporary work platforms, perimeter guard rails, safety

mesh, industrial rope access systems, catch platforms, industrial safety nets, toe boards and rails. For more information refer to Managing the Risk of Falls at Workplaces, Safe Work Australia (2011).

• Tool lanyards and topped containers can also be utilised as engineering controls

When working at heights, administrative controls should be implemented, examples include:• “No Go” areas that prohibit unauthorised people from

entering areas. Permit systems can also be used to restrict access.

• Sequence work to reduce risk, for example so trades are not working above and below each other at the same time.

• Staff training, risk assessment and safe work procedures. For more information

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--2

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



STEP

STEP

STEP

SELECT TAILS & TRAPS

SELECT LANYARDS

SELECT HOIST BUCKETS, ACCESSORY ANCHOR & TOOL BELTS

SELECTTIE HOOKS & GRABBERS

GO TOP. 5

HELPING FIX THE ISSUENo attachment point means no tether for the object, creating a falling object hazard.

HELPING FIX THE ISSUESafely tether all tools, equipment, PPE, parts, materials and debris to minimise hazards found at heights

HELPING FIX THE ISSUECreate safe options to tether small objects at heights, on the worker, and for lifting operations.

HELPING FIX THE ISSUEHelp tidy work areas that cause fall hazards. Secure cable and rope to stop trip and tangle hazards.

GO TO P. 9

GO TO P. 14

GO TO P. 18

Use Tails and Traps to create attachment points for tools and personal equipment without attachment points.

Level of clearance, weight of tools and equipment, connection points, risk evaluation and different hazards such as electrical or tangle hazards all effect lanyard selection.

Use the Accessory Anchor to create anchor points where they don’t exist. Use Hoist Buckets to secure and lift tools, materials, parts & debris. Secure smaller objects with Aerial tool belts.

Use Tie Hooks to safely secure rope and cables. Use Grabbers to secure rags, gloves and similar equipment at heights.

STEP

Inspecting the work environment by conducting a detailed risk assessment is crucial to identify these hazards and minimize the risk involved. In addition to large objects, untethered, and unsecured tools and equipment can be dangerous and can cause injury, damages and lost time.

The following pages can help identify the correct tethering and storage solutions for your task to prevent small falling objects. After cataloguing and identifying sizes, weights and attachment points of your tools required for the job, use the following steps to ensure you leave no loose ends.

The top 3 causes of falling objects are inadequate risk assessments, procedures and human error.

3

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



STEP

STEP

STEP

SELECT TAILS & TRAPS

SELECT LANYARDS

SELECT HOIST BUCKETS, ACCESSORY ANCHOR & TOOL BELTS

SELECTTIE HOOKS & GRABBERS

GO TOP. 5

HELPING FIX THE ISSUENo attachment point means no tether for the object, creating a falling object hazard.

HELPING FIX THE ISSUESafely tether all tools, equipment, PPE, parts, materials and debris to minimise hazards found at heights

HELPING FIX THE ISSUECreate safe options to tether small objects at heights, on the worker, and for lifting operations.

HELPING FIX THE ISSUEHelp tidy work areas that cause fall hazards. Secure cable and rope to stop trip and tangle hazards.

GO TO P. 9

GO TO P. 14

GO TO P. 18

Use Tails and Traps to create attachment points for tools and personal equipment without attachment points.

Level of clearance, weight of tools and equipment, connection points, risk evaluation and different hazards such as electrical or tangle hazards all effect lanyard selection.

Use the Accessory Anchor to create anchor points where they don’t exist. Use Hoist Buckets to secure and lift tools, materials, parts & debris. Secure smaller objects with Aerial tool belts.

Use Tie Hooks to safely secure rope and cables. Use Grabbers to secure rags, gloves and similar equipment at heights.

STEP

Inspecting the work environment by conducting a detailed risk assessment is crucial to identify these hazards and minimize the risk involved. In addition to large objects, untethered, and unsecured tools and equipment can be dangerous and can cause injury, damages and lost time.

The following pages can help identify the correct tethering and storage solutions for your task to prevent small falling objects. After cataloguing and identifying sizes, weights and attachment points of your tools required for the job, use the following steps to ensure you leave no loose ends.

The top 3 causes of falling objects are inadequate risk assessments, procedures and human error.

3


SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

When working at heights, legislation requires tools to be tethered.

Falling objects are a leading cause of injuries and death in the workplace.

4

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


WEB TOOL TAIL ELASTIC LOOP TAIL

0.9Kg Max* 4.5Kg Max* 6.8Kg Max*

MODEL NO. PART NO. MODEL

NO. PART NO. MODEL NO.

PART NO.

3700

19703

3703

3703EXT

3713

19767

3703

3703EXT19769

19704

1970519765

19706

Tool Trap

Solution

Tool Trap

Model

Number

Tool Tail Model

(Type)

Tool Diameter

Min/Max (mm) Tool Diameter

Min/Max With Capacity

3723 3703 (Elastic) 16-3816-32mm 0.9kgs

32-38mm 2.3kgs

3724 3703 (Elastic) 38-4532-38mm 2.3kgs

38-45mm 4.5kgs

3726 3703EXT (Elastic) 45-6345mm-57mm 4.5kgs

57mm-63mm 6.8kgs

37503700 (Web)

All Diameters All Diameters0.9kgs

3703 (Elastic) 6.8kgsTAPE TRAP

SHRINK TRAP

OR

Shackle Solution A B C

3790S 19mm 10mm 5mm

3790M 26mm 12mm 5mm

3790L 32mm 16mm 8mm

3790XL 38mm 20mm 10mm

A

C

B

STEP SELECT TAILS & TRAPS

Catalogue all tools and equipment used at heights. For tools and equipment that do not have attachment points, select a tail and trap or a shackle.

SELECT TRAP

SELECT SHACKLE

SELECT TAIL1

2

WHAT TO DO...

3

Select a tail and trap or a shackle.

WEB TOOL TAIL

ELASTIC LOOP TAIL

*Note - Max denotes the maximum weight of the item to tether

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

5

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


WEB TOOL TAIL ELASTIC LOOP TAIL

0.9Kg Max* 4.5Kg Max* 6.8Kg Max*

MODEL NO. PART NO. MODEL

NO. PART NO. MODEL NO.

PART NO.

3700

19703

3703

3703EXT

3713

19767

3703

3703EXT19769

19704

1970519765

19706

Tool Trap

Solution

Tool Trap

Model

Number

Tool Tail Model

(Type)

Tool Diameter

Min/Max (mm) Tool Diameter

Min/Max With Capacity

3723 3703 (Elastic) 16-3816-32mm 0.9kgs

32-38mm 2.3kgs

3724 3703 (Elastic) 38-4532-38mm 2.3kgs

38-45mm 4.5kgs

3726 3703EXT (Elastic) 45-6345mm-57mm 4.5kgs

57mm-63mm 6.8kgs

37503700 (Web)

All Diameters All Diameters0.9kgs

3703 (Elastic) 6.8kgsTAPE TRAP

SHRINK TRAP

OR

Shackle Solution A B C

3790S 19mm 10mm 5mm

3790M 26mm 12mm 5mm

3790L 32mm 16mm 8mm

3790XL 38mm 20mm 10mm

A

C

B

STEP SELECT TAILS & TRAPS

Catalogue all tools and equipment used at heights. For tools and equipment that do not have attachment points, select a tail and trap or a shackle.

SELECT TRAP

SELECT SHACKLE

SELECT TAIL1

2

WHAT TO DO...

3

Select a tail and trap or a shackle.

WEB TOOL TAIL

ELASTIC LOOP TAIL

*Note - Max denotes the maximum weight of the item to tether

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

5

ERGODYNE® SQUIDS® 3713 ELASTIC LOOP TOOL TAILS SWIVEL

ERGODYNE® SQUIDS® 3703, 3703EXT ELASTIC LOOP TOOL TAILS

Elastic loop Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 6.8kg using Squids® Tool Traps™. These Tool Tails can also be used as an anchor point on belt, harness or separate structure.

DESCRIPTION

Part No. Description Units

19767 3703 Standard 28cm Lime Each

19769 3703EXT Extended 46cm Lime Each

KEY FEATURES•Stretch cord surrounded by tubular nylon webbing•Lock stitching at both ends for extra security•Adjustable barrel lock for tool attachment•Fully enclosed plated O-ring for secure attachment•Maximum safe working capacity 6.8 kg•Doubles as an anchor loop for belt, harness or separate

structure•Third party tested using a 2:1 safety factor

KEY FEATURES•Plated swivelling connection•Doubles as an anchor loop for belt,

harness or separate structure•Maximum safe working capacity: 4.6 kg•Third party tested using a 2:1 safety

factor•Stretch cord surrounded by tubular

nylon webbing•Lock stitching at both ends for extra

security•Adjustable barrel lock for tool

attachment

DESCRIPTION


19765 Swivel Elastic Loop Tool Tail Each

Elastic loop Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 6.8kg using Squids® Tool Traps™. These Tool Tails can also be used as an anchor point on belt, harness or separate structure.

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--NO

LO

OS

E E

ND

S--

6

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


ERGODYNE® SQUIDS® 3700 WEB TOOL TAILS

pry

me.

net

.au

Web Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 0.90kg using Squids® Tool Traps™.

KEY FEATURES•Ultra strength nylon webbing•Fully enclosed plated D-ring for secure

attachment•High tensile strength nylon thread•Web catch with double stitch for more

durable stopping point•Available in five colour coded lengths•Third party tested using a 2:1 safety factor

DESCRIPTION


19703 Web Tool Tails (9cm) Black Each

19704 Web Tool Tails (11.5cm) Orange Each

19705 Web Tool Tail (14cm) Black Each


19708 Web Tool Tails (21.5cm) Black Each

ERGODYNE® SQUIDS® TAPE TRAP

Captures Squids® Tool Tails™ securing a safe connection to tools like no other tool attachment tape on the market. Quickly wraps on a variety of hand tools, power tools and other equipment providing security and added grip

KEY FEATURES•Non-silicone based makeup works well in a variety of

applications•No adhesives so it can be replaced without a mess•Sealed and set with heat application to finish

application and secure•Cut and puncture resistant compared to other tool

tapes•Material content and finish provides added grip to the

handle of a tool•Maximum safe working capacity: 6.8 kg depending on

length, tool, tail and lanyard used

DESCRIPTION


19760 3705S - Tape Trap 3.65m Roll Each

19761 3705M - Tape Trap 9.14m Roll Each

MEASURE IT WRAP IT HEAT IT LAY IT DOWN TETHER IT

USING SQUIDS® TAPE TRAPS

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

7

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


ERGODYNE® SQUIDS® 3700 WEB TOOL TAILS

pry

me.

net

.au

Web Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 0.90kg using Squids® Tool Traps™.

KEY FEATURES•Ultra strength nylon webbing•Fully enclosed plated D-ring for secure

attachment•High tensile strength nylon thread•Web catch with double stitch for more

durable stopping point•Available in five colour coded lengths•Third party tested using a 2:1 safety factor

DESCRIPTION


19703 Web Tool Tails (9cm) Black Each


19705 Web Tool Tail (14cm) Black Each


19708 Web Tool Tails (21.5cm) Black Each

ERGODYNE® SQUIDS® TAPE TRAP

Captures Squids® Tool Tails™ securing a safe connection to tools like no other tool attachment tape on the market. Quickly wraps on a variety of hand tools, power tools and other equipment providing security and added grip

KEY FEATURES•Non-silicone based makeup works well in a variety of

applications•No adhesives so it can be replaced without a mess•Sealed and set with heat application to finish

application and secure•Cut and puncture resistant compared to other tool

tapes•Material content and finish provides added grip to the

handle of a tool•Maximum safe working capacity: 6.8 kg depending on

length, tool, tail and lanyard used

DESCRIPTION


19760 3705S - Tape Trap 3.65m Roll Each

19761 3705M - Tape Trap 9.14m Roll Each

MEASURE IT WRAP IT HEAT IT LAY IT DOWN TETHER IT

USING SQUIDS® TAPE TRAPS

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

7

ERGODYNE® SQUIDS® 3723, 3724, 3726 SHRINK TOOL TRAP

KEY FEATURES•19723 Fits tool diameter range

16mm - 32mm•19724 Fits tool diameter range

32mm - 45mm•19725 Fits tool diameter 45mm - 63mm•Cold Shrink technology from

3M requires no heat source•No additional tools needed to

ensure a secure connection on tool

•EPDM rubber material resists acids, alkalies and extreme temps

•Patent Pending application is the quickest and easiest way to create an attachment point

•Maximum safe working capacity: 6.8kg depending on tool, tail and lanyard used

•Third party tested using a 2:1 safety factor

Cold Shrink Traps capture Squids® Elastic Tool Tails™ creating a retrofit connection point for tethering.

DESCRIPTION


19723 Shrink Tool Trap 2.3kg Each



ERGODYNE® SQUIDS® TOOL SHACKLESStainless steel U shaped shackles connect to waisted tools (tapered mid sections) or tools with captive holes, creating clean, secure attachment points for tethering.

KEY FEATURES•Stainless steel (#304) material is

corrosion resistant•One step retrofit attachment for

temporary or permanent connection point

•Connects around midsection of a waisted tool

•Connects through eye of a captive tool to create a more accessible tethering point

•Secure by adding a drop of adhesive and tightening with wrench or pliers

•Maximum safe working capacity: 6.8 kg depending on model, tool and lanyard used

DESCRIPTION


19792 Small Each

19793 Medium Each

19794 Large Each

19795 Extra Large Each

PULL CORD TO ATTACH

SHRINK TRAP TO TOOL &

TAIL

TOOL READY FOR TETHER

WITH SHRINK TRAP & TAIL

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--NO

LO

OS

E E

ND

S--

8

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Minimise Tangle Hazards

MaringHazard

Mo

del

Weig

ht

Max

Deta

ch

ab

le

Retr

acta

ble

Sw

ivel

Sin

gle

Lo

op

Lo

ckin

g

Cara

bin

er

Du

al L

oo

p

Scre

w G

ate

Tri

ple

Lo

ckin

g

Du

al L

eg

3000 0.46kgs X X X

3001 0.46kgs X X X

3115 0.9kgs X

3104 2.0kgs X X

3102 2.3kgs X X

3100 4.6kgs X

3108 4.6kgs X X

3111 6.8kgs X X

3311 6.8kgs X X X

3119 9.0kgs X X X

Identify hazards in your at heights environment. Select lanyards to tether all loose tools, equipment & hoist buckets to minimise hazards identified in the risk assessment.

WHAT TO DO...STEP SELECT LANYARDS

LANYARD FEATURE

LANYARD MODEL NUMBER

3000 3001 3115 3104 3102 3100 3108 3111 3311 3119

Weight Max (kg) 0.46 0.9 0.9 2.0 2.3 4.6 4.6 6.8 6.8 9.0

Minimise Tangle & Twist Hazard

(Ideal for small tools & equipment)

Detachable X X X

Retractable X X

Swivel X X X X

Minimise Marring Hazard Single Loop X X X X X X

Minimise Sparking & Marring Dual Loop X

Extra Secure Connection - Corrosive Environment

Locking Carabiner X X X

Screw Gate X X X X X

Most Secure Connection - Corrosive Environment

Dual Leg X

Triple Locking X

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

ERGODYNE® SQUIDS® 3115 WRIST TOOL LANYARD

KEY FEATURES•Polyester webbing cuff secures to wrist•Ribbed pull cord•Adjustable barrel lock for tool attachment•Maximum safe working capacity: 0.9 kg•Tether length 19cm•Wrist Measurement: S/M 13cm – 18cm•Wrist Measurement: L/XL 18cm – 22cm

Wrist Tool Lanyard: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools.

DESCRIPTION


19042 Black S/M Each

19052 Black L/XL Each

9

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Minimise Tangle Hazards

MaringHazard

Mo

del

Weig

ht

Max

Deta

ch

ab

le

Retr

acta

ble

Sw

ivel

Sin

gle

Lo

op

Lo

ckin

g

Cara

bin

er

Du

al L

oo

p

Scre

w G

ate

Tri

ple

Lo

ckin

g

Du

al L

eg

3000 0.46kgs X X X

3001 0.46kgs X X X

3115 0.9kgs X

3104 2.0kgs X X

3102 2.3kgs X X

3100 4.6kgs X

3108 4.6kgs X X

3111 6.8kgs X X

3311 6.8kgs X X X

3119 9.0kgs X X X

Identify hazards in your at heights environment. Select lanyards to tether all loose tools, equipment & hoist buckets to minimise hazards identified in the risk assessment.

WHAT TO DO...STEP SELECT LANYARDS

LANYARD FEATURE

LANYARD MODEL NUMBER

3000 3001 3115 3104 3102 3100 3108 3111 3311 3119

Weight Max (kg) 0.46 0.9 0.9 2.0 2.3 4.6 4.6 6.8 6.8 9.0

Minimise Tangle & Twist Hazard

(Ideal for small tools & equipment)

Detachable X X X

Retractable X X

Swivel X X X X

Minimise Marring Hazard Single Loop X X X X X X

Minimise Sparking & Marring Dual Loop X

Extra Secure Connection - Corrosive Environment

Locking Carabiner X X X

Screw Gate X X X X X

Most Secure Connection - Corrosive Environment

Dual Leg X

Triple Locking X

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

ERGODYNE® SQUIDS® 3115 WRIST TOOL LANYARD

KEY FEATURES•Polyester webbing cuff secures to wrist•Ribbed pull cord•Adjustable barrel lock for tool attachment•Maximum safe working capacity: 0.9 kg•Tether length 19cm•Wrist Measurement: S/M 13cm – 18cm•Wrist Measurement: L/XL 18cm – 22cm

Wrist Tool Lanyard: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools.

DESCRIPTION


19042 Black S/M Each

19052 Black L/XL Each

9

ERGODYNE® SQUIDS® 3000 RETRACTABLE DUAL CARABINER ERGODYNE® SQUIDS® 3001 SINGLE CARABINER W/LOOP END

ERGODYNE® SQUIDS® 3025, 3026 RETRACTABLE ACCESSORIES

Retractable tool lanyard attachments for quick exchange of multiple tools.

KEY FEATURES• Compatible with Retractable lanyards 3000

and 3001• Modular quick connecting buckle for

exchanging multiple tools

DESCRIPTION


19325 Compatible with 3000 Retractable Lanyards Each

19326 Compatible with 3001 Retractable Lanyards Each

3000 CARABINER

KEY FEATURES• Self-setting pawls set desired lanyard length up to 122cm• ABS thermoplastic housing for ultimate durability• Nickel-plated swivelling top ring for 360 degree rotation• Stainless steel carabiners (#304) for corrosion resistance• Technora cord for ultimate strength and durability• Modular quick connecting buckle for exchanging multiple

tools• Adjustable barrel lock for tool attachment• 3000 Carabiner - Maximum safe working capacity: 0.46 kg•3001 Loop - Maximum safe working capacity: 0.9kg• Patented design

3001 LOOP

Retractable tool lanyard with stainless steel carabiner attachment. Locks into place at desired length preventing tangles and work under tension while securing tools.

DESCRIPTION


19300 Carabiner Each

19301 Loop Each

3025 CARABINER

3026 LOOP

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--NO

LO

OS

E E

ND

S--

10

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

KEY FEATURES•Stretch cord surrounded

by tubular nylon webbing

•Lock stitching at both ends for extra security

•Aluminium carabiner•Adjustable barrel lock

for tool attachment•Maximum safe working

capacity: 4.6 kg•Standard 89cm-107cm•Extended 107cm-137cm

Tool Lanyard-Single Carabiner: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools.

DESCRIPTION


19003 Lime Each

19013 Lime - Extended Each

KEY FEATURES•Stretch cord surrounded by

tubular nylon webbing•Lock stitching at both ends

for extra security•Heavy-duty (8KN)

triple-locking carabiner•Carabiner features 360

degree swivel captive-eye•Adjustable barrel lock for

tool attachment•Maximum safe working


Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools. Swivelling triple locking carabiners provide secure connection and prevent twisting and tangling while performing job.

DESCRIPTION


19029 Lime Each


ERGODYNE® SQUIDS® 3100, 3100EXT SINGLE CARABINER

ERGODYNE® SQUIDS® 3119, 3119EXT TRIPLE-LOCKING DUAL CARABINER

11

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

KEY FEATURES•Stretch cord surrounded

by tubular nylon webbing

•Lock stitching at both ends for extra security

•Aluminium carabiner•Adjustable barrel lock

for tool attachment•Maximum safe working


Tool Lanyard-Single Carabiner: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools.

DESCRIPTION


19003 Lime Each



tubular nylon webbing•Lock stitching at both ends

for extra security•Heavy-duty (8KN)

triple-locking carabiner•Carabiner features 360

degree swivel captive-eye•Adjustable barrel lock for

tool attachment•Maximum safe working


Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools. Swivelling triple locking carabiners provide secure connection and prevent twisting and tangling while performing job.

DESCRIPTION


19029 Lime Each


ERGODYNE® SQUIDS® 3100, 3100EXT SINGLE CARABINER

ERGODYNE® SQUIDS® 3119, 3119EXT TRIPLE-LOCKING DUAL CARABINER

11

ERGODYNE® SQUIDS® 3102, 3102EXT DETACHABLE SINGLE CARABINER

ERGODYNE® SQUIDS® 3104 DETACHABLE DUAL LOOP

ERGODYNE® SQUIDS® 3108 LOCKING SINGLE CARABINER

Non-conductive and non-marring. Dual loop, interchangeable design eliminates all metal from lanyard. Great for working on or around sensitive surfaces or electrical applications.

KEY FEATURES•Stretch cord surrounded by tubular nylon

webbing• Lock stitching at both ends for extra security• Truly non-conductive with dual loop design• Perfect for scratch and damage sensitive

surface work as non-marring option• Adjustable barrel lock for tool attachment• Modular quick connecting buckle for

exchanging multiple tools• Maximum safe working capacity: 2.26 kg• Standard 89cm-107cm

DESCRIPTION


19104 Lime Each

Tool Lanyard - Detachable/Single Carabiner: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools. Compatible with #3103 Lanyard Loop.

KEY FEATURES• Stretch cord surrounded by tubular nylon

webbing• Lock stitching at both ends for extra security• Aluminium carabiner•Adjustable barrel lock for tool attachment• Quick connect buckle• Compatible with 3103: Detachable Lanyard

Loops• Maximum safe working capacity: 2.26 kg• Standard 89cm-107cm •Extended 107cm-137cm

DESCRIPTION


19063 Lime Each

19073 Lime-Extended Each

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--NO

LO

OS

E E

ND

S--

Tool Lanyard - Heavy-duty, Self Locking Carabiner: Carabiner self-locks to worker or anchor for added security. Shorter length helps prevent tools from hitting the deck.

KEY FEATURES•Stretch cord surrounded by tubular nylon webbing• Lock stitching at both ends for extra security• Heavy-duty (500kgf) self-locking carabiner• Adjustable barrel lock for tool attachment•Maximum safe working capacity: 4.6 kg• Standard: 71cm - 89cm

DESCRIPTION


19008 Lime Each

12

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



tubular nylon webbing•Lock stitching at both ends for

extra security•Stainless steel carabiners for

corrosion resistance•Screwgate on carabiner for

locking connection•Maximum safe working capacity:

6.8 kg•Standard 89cm-107cm•Extended 107cm-137cm

Stainless Steel Screw Gate Tool Lanyard - Dual Carabiner: Stainless steel carabiners with locking screw gates for a sure connection in more corrosive environments.

DESCRIPTION


19027 Lime Each


SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

ERGODYNE® SQUIDS® 3311 TWIN LEG STAINLESS TRIPLE CARABINER

ERGODYNE® SQUIDS® 3111, 3111EXT STAINLESS DUAL CARABINER



extra security•Twin leg for connecting multiple

tools or having 100% tie-off of single tool

•Stainless steel carabiners (#304) for corrosion resistance

•Maximum safe working capacity: 6.8 kg

•Captive eye carabiner with screwgate for locking connection

•Standard 89cm-107cm

Twin Leg Triple Carabiner: Stainless steel carabiners with locking screw gates for a sure connection in more corrosive environments. Dual leg for multiple connections.

DESCRIPTION


19083 Lime Each

13

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0




extra security•Stainless steel carabiners for

corrosion resistance•Screwgate on carabiner for

locking connection•Maximum safe working capacity:

6.8 kg•Standard 89cm-107cm•Extended 107cm-137cm

Stainless Steel Screw Gate Tool Lanyard - Dual Carabiner: Stainless steel carabiners with locking screw gates for a sure connection in more corrosive environments.

DESCRIPTION


19027 Lime Each


SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

ERGODYNE® SQUIDS® 3311 TWIN LEG STAINLESS TRIPLE CARABINER

ERGODYNE® SQUIDS® 3111, 3111EXT STAINLESS DUAL CARABINER



extra security•Twin leg for connecting multiple

tools or having 100% tie-off of single tool

•Stainless steel carabiners (#304) for corrosion resistance

•Maximum safe working capacity: 6.8 kg

•Captive eye carabiner with screwgate for locking connection

•Standard 89cm-107cm

Twin Leg Triple Carabiner: Stainless steel carabiners with locking screw gates for a sure connection in more corrosive environments. Dual leg for multiple connections.

DESCRIPTION


19083 Lime Each

13

Clamp Hard Hat Lanyard: Easily and comfortably secures a hard hat to a worker to prevent the item from falling.

KEY FEATURES•Comfortably attaches

to hard hats and other headwear

• Easy release clamp attaches securely to just about anything

• Comfortable high stretch elastic material

• Hi-Vis Lime

DESCRIPTION


19155 Lime Each

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--NO

LO

OS

E E

ND

S--

ERGODYNE® SQUIDS® 3155 CLAMP HARD HAT LANYARD

Model Diameter (cm) Height (cm) Litres Interior Pockets Max Working

5740 32 43 34.2 1 68kg

5742 25 71 36.0 2 56kgs

5746 32 33 30.2 15 34kgs

Model Length (cm) Max Working KG

3175 60 181

Model 5516 5518

Pockets 16 19

D-rings 3 4

1.

2. 3.

WHAT TO DO...STEP SELECT HOIST BUCKETS, ACCESSORY ANCHOR & TOOL BELTS

SELECT HOIST BUCKETS1

SELECT TOOL BELT & BAG2

SELECT ACCESSORY ANCHORS3

Select the 5728 bolt bag to secure small parts to the person working at heights

Select hoist buckets by identifying heavy equipment, parts, debris, materials required to be secured and/or hoisted. Select tool belt & bag for smaller items carried by the worker. Select accessory anchors to create attachment points .

14

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


ERGODYNE® ARSENAL® 5728 TALL SAFETY BOLT BAG

ERGODYNE® ARSENAL® 5742T TALL LEATHER BOTTOM BUCKET-SWIVEL WITH TOP

ERGODYNE® ARSENAL® 5740T LEATHER BOTTOM BUCKET-SWIVEL WITH TOP

ERGODYNE® ARSENAL® 5746 TAPERED PLASTIC BOTTOM BUCKET-SWIVEL

KEY FEATURES•Canvas•Moulded plastic base•Moulded plastic top ring•PP rope handle•15 interior pockets•Heavy-gauge nylon

stitching•Nickel-plated swivel clip•Maximum safe working

capacity: 34kg•Wide mouth for easy

loading•Diameter 32cm, height

33cm

DESCRIPTION


14446 White Each

Tapered Plastic Bottom Bucket: Wide top for easy access to bucket contents. Rope Handle

KEY FEATURES•Canvas•Leather reinforced base•Moulded plastic top ring•PP rope handle•Interior pocket•Heavy-gauge nylon


capacity: 68 kg•Diameter 32cm, height

43cm•Patented safety top

included

Leather Bottom Bucket w/ Snap: High wall, heavy duty bucket for strength and durability. Included detachable safety top.

DESCRIPTION


14540 White Each

KEY FEATURES•Canvas•Leather reinforced base•Moulded plastic top ring•PP rope handle•2 interior pockets for

organization•Heavy-gauge nylon stitching•Nickel-plated swivel clip•Maximum safe working

capacity: 56 kg•Diameter 25cm, height 71cm•Patented safety top included

Tall Leather Bottom Bucket: High wall, heavy duty bucket. Tall design holds longer equipment. Rope handle with swivel snap. Safety top included.

DESCRIPTION


14542 White Each

Tall Safety Bolt Bag with Loop Design: Wide body and one-handed cinch-up top for keeping gear safe and secure

KEY FEATURES•Canvas•Patented one-handed

closure for safety and security

•Nickel-plated rivets•6- and 12-ply nylon

stitching•2 Exterior tool loops•Patented nickel-plated

storm drain•Maximum safe working

capacity: 12 Kg•25cm x 13cm x 33cm

DESCRIPTION


14428 White Each

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

15

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


ERGODYNE® ARSENAL® 5728 TALL SAFETY BOLT BAG

ERGODYNE® ARSENAL® 5742T TALL LEATHER BOTTOM BUCKET-SWIVEL WITH TOP

ERGODYNE® ARSENAL® 5740T LEATHER BOTTOM BUCKET-SWIVEL WITH TOP

ERGODYNE® ARSENAL® 5746 TAPERED PLASTIC BOTTOM BUCKET-SWIVEL

KEY FEATURES•Canvas•Moulded plastic base•Moulded plastic top ring•PP rope handle•15 interior pockets•Heavy-gauge nylon


capacity: 34kg•Wide mouth for easy

loading•Diameter 32cm, height

33cm

DESCRIPTION


14446 White Each

Tapered Plastic Bottom Bucket: Wide top for easy access to bucket contents. Rope Handle

KEY FEATURES•Canvas•Leather reinforced base•Moulded plastic top ring•PP rope handle•Interior pocket•Heavy-gauge nylon


capacity: 68 kg•Diameter 32cm, height

43cm•Patented safety top

included

Leather Bottom Bucket w/ Snap: High wall, heavy duty bucket for strength and durability. Included detachable safety top.

DESCRIPTION


14540 White Each

KEY FEATURES•Canvas•Leather reinforced base•Moulded plastic top ring•PP rope handle•2 interior pockets for

organization•Heavy-gauge nylon stitching•Nickel-plated swivel clip•Maximum safe working

capacity: 56 kg•Diameter 25cm, height 71cm•Patented safety top included

Tall Leather Bottom Bucket: High wall, heavy duty bucket. Tall design holds longer equipment. Rope handle with swivel snap. Safety top included.

DESCRIPTION


14542 White Each

Tall Safety Bolt Bag with Loop Design: Wide body and one-handed cinch-up top for keeping gear safe and secure

KEY FEATURES•Canvas•Patented one-handed

closure for safety and security

•Nickel-plated rivets•6- and 12-ply nylon

stitching•2 Exterior tool loops•Patented nickel-plated

storm drain•Maximum safe working

capacity: 12 Kg•25cm x 13cm x 33cm

DESCRIPTION


14428 White Each

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

15

ERGODYNE® ARSENAL® 5518 19-POCKET AERIAL TOOL POUCH - LOOP DESIGN

ERGODYNE® ARSENAL® 5516 16-POCKET AERIAL TOOL POUCH

KEY FEATURES•1680D Ballistic Nylon•16 pockets for tools and fasteners•Top cover flap with buckle closure •Three nickel-plated D-rings for tool lanyard

attachment•Patented Storm Drains™•Abrasion-resistant PVC-reinforced pouch bases•Maximum safe working capacity: 15 kg

DESCRIPTION


13640 Grey Each

KEY FEATURES•1680D Ballistic Nylon•Top cover flap with hook and loop closure•Four Nickel-plated D-rings for tool lanyard attachment•Patented Storm Drains™•Abrasion-resistant PVC-reinforced pouch bases•Maximum safe working capacity: 15 kg

Aerial Tool Pouch/Loop Design: Easily attaches to any belt while keeping tools and fasteners secure.

DESCRIPTION


13642 Grey Each

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--NO

LO

OS

E E

ND

S--

ERGODYNE® SQUIDS® 3175 ACCESSORY ANCHOR

Tool Lanyard - Heavy-duty, Self Locking Carabiner: Carabiner self-locks to worker or anchor for added security. Shorter length helps prevent tools from hitting the deck.

KEY FEATURES•Heavy-duty 45mm Tetoron webbing strap• Nickel-plated iron D-Ring• Black 840D Nylon sleeve material• Heavy-gauge, contrasting color stitching• Maximum safe working capacity: 181 kg• Not for climbing or fall arrest

DESCRIPTION


19175 Lime Each

16

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

17

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--N

O L

OO

SE

EN

DS

--

17

ERGODYNE® SQUIDS® 3400 GRABBER

Grabber: Keep gloves and other items handy. Clips to almost anything. Patented.

KEY FEATURES• Clips to clothing, belts, tool belts, and D-rings• Detachable, usable with ‘beeners, D-rings, etc.• Breakaway feature• Dielectric / non-conductive material• Durable, ultra-resilient acetal copolymer• Patented design

DESCRIPTION


19112 Black Each

19117 Blue Each

19118 Hi-Vis Orange Each

19119 Hi-Vis Lime Each

ERGODYNE® SQUIDS® 3510, 3530, 3540 TIE HOOK

3510 35403530DESCRIPTION

Part No. Description Recommended Load Limit Units

33102 Small Hook 30cm 10kg Each



33302 Large Hook 30cm 10kg Each



33402 Large Locking Hook 30cm 20kg Each



KEY FEATURES• Reusable sliding belt lock

mechanism• High tensile strength, weather

resistant Nylon 66• Hi vis orange color• Excellent resistance to oil, salt,

solvents, and alkali• Temp range: -40°C - 80°C• Patented design

dentify trip and tangle hazards. Use tie hooks to secure rope and cable.Use grabbers to secure any loose items such as gloves and rags to the worker.

WHAT TO DO...SELECT TIE HOOKS & GRABBERS

STEP

Tie Hook: Super duty, reusable tie hook for organizing and cinching hoses, cords, pipe and almost anything else.

1.

2.

SM

AL

L F

AL

LIN

G O

BJE

CT

S W

HA

T Y

OU

NE

ED

TO

KN

OW

--NO

LO

OS

E E

ND

S--

18

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


INNOVATING SAFETY AND WELLNESS SOLUTIONS

AUSTRALIA

ADDRESS Unit 10/38, Limestone Street Darra, QLD 4076

MAIL PO Box 1298 Kenmore QLD 4069

PHONE +61 7 3374 4544

FAX +61 7 3374 4768

WEB www.pryme.net.au

SINGAPORE

ADDRESS 1015 Geylang East Ave 3 #04-105 Singapore 389730

PHONE +65 6743 9882

FAX +65 6743 9887

WEB www.ensscom.com

CONTACT NEW ZEALAND

ADDRESS 52A Stonedon Drive East Tamaki, Auckland

MAIL PO Box 98726, SAMC Auckland

PHONE +64 9 272 3075

FAX +64 9 272 3095

WEB www.pryme.net.au

Since its launch in New Zealand in 1999, Pryme has established itself as an international leader in the innovation of safety and wellness solutions.

Operating in Australasia and Asia Pacific, Pryme has over 300 distributors and 700 outlets covering the safety, industrial, mining, automotive, electrical, sporting, hardware, mining and pharmaceutical sectors. Its products are used by some of Australia’s largest organisations.

Australia, South East Asia. Thailand, New Zealand, Indonesia, Vietnam, Malaysia, Papua New Guinea, South Africa, South

Pacific, Singapore, USA (Los Angeles).

Pryme has a strong international presence, with products in over

10 countries.

AJ885

Documents

Pryme fall prevention c&l