Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Summary
Here is my design of a Lightbox for the MK3s. The Lightbox will beconnected directly to the EINSY Board and can be swtitched on or off. Thewhole print won't need any supports.
Hardware needed:
WiresMini Switch (9x14mm, like this) If you need a different cutout forother sizes please let me know!Soldering tools24V LED Strip - up to 15mm thick
Installation guide:
Nils Kal
Prusa MK3SLightbox
VIEW IN BROWSER
updated 16. 5. 2020 | published 15. 5. 2020
• •
• •
All screws are 3D-printed, make sure tonot overtighten them!
14.92 hrs
2 pcs
f
0.15 mm
k
0.40 mm
h
1
110.00 g
d
PrusaMK3/S
Connect wires to Einsy Board as shown here.
Have fun with your new lightbox!
+++++++++++++++++++++++++++++++++++++++++++++++++
If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also
welcome and may check out my other designs!
Happy printing!
3D Printers > 3D Printers - Upgrades
Print Files (.gcode) DOWNLOAD ALL FILES
1.5 MB
0.93 hrs f 0.15 mm k 0.40 mm h PLA 6.80 g d PrusaMK3/S
updated 15. 5. 2020
25.7 MB
13.99 hrs f 0.15 mm k 0.40 mm h PLA 103.00 g d PrusaMK3/S
updated 15. 5. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
4.1 MBupdated 15. 5. 2020
864.8 KBupdated 15. 5. 2020
137.3 KBupdated 15. 5. 2020
upgrade prusa mk3s lightbox light led
Print as alignedNo supports neededPrint in PETG for durability
• • •
orange_parts_015mm_pla_mk3s_56m.gcode
black_parts_015mm_pla_mk3s_13h59m.gcode
black_parts.3mf
orange_parts.3mf
ground.stl
51.8 KBupdated 15. 5. 2020
323.3 KBupdated 15. 5. 2020
2.4 MBupdated 15. 5. 2020
2.8 MBupdated 15. 5. 2020
5.0 MBupdated 15. 5. 2020
6.8 MBupdated 15. 5. 2020
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
backplate.stl
bracket.stl
bolt-ground.stl
bolt-top-frame.stl
nut-top-frame.stl
main-frame.stl