Upload
vodiep
View
231
Download
0
Embed Size (px)
Citation preview
©StephensonAcademy 2017. All rights reserved 1
Progress to excellence
Progress to excellence
www.stephensonacademy.com
©StephensonAcademy 2017. All rights reserved
Progress to excellence
2
PROVISION OF
ENGINEERING
SERVICES
Rotterdam, 03 April 2018
©StephensonAcademy 2017. All rights reserved 3
Progress to excellence
General
Stephenson Academy B.V. offers engineering services in cooperation to
its well established network, well experienced engineers, naval
architects and equipment designers with consolidated competences in
equipment, structural, marine and operational field with experience in
the offshore OIL&Gas projects, Renewables and Equipment.
Stephenson Academy B.V. covers the complete chain from the
conceptual/feasibility phase till the asset development, assistance
during installation/commissioning phase and managing of the whole
offshore operation.
©StephensonAcademy 2017. All rights reserved 4
Progress to excellence
Engineering Services - Specialties
complex subsea designs and installation studies for pipelines,
umbilicals, cables, risers, spool & jumpers ● marine operations ●
hydrodynamic and naval analyses ● identification of the required marine
spread, equipment, installation aids and ancillaries ● structural analysis
of platforms ● hull reinforcements design ● robust design of stinger
systems ● onshore structures ● offshore structures ● design of
foundations ● decommissioning ● deck equipment ● subsea equipment
and tools ● hydraulic power and systems ● electrical power ● control
systems ● risk analysis ● integrated HSE ● structural engineering ●
detailed and shop drawings
©StephensonAcademy 2017. All rights reserved 5
Progress to excellence
Service
Code
Title Description
E-100 Consultancy
and system
engineering
Management of multitasking projects, including Feasibility study and
cost/benefits evaluation, Technical and economical project planning, Technical
coordination of work teams and interface with Clients and Suppliers, Job
direction, Projects design review, Environmental impact studies
Technical assistance for suppliers evaluation and contracts assignment
E-200 Mechanical
engineering
Mechanical Design
a) Feasibility studies, including prototype basic design
b) Commercial components definition
c) Detail design (Assembly drawings; Workshop drawings; Parts list; Exploded
drawings)
d) Calculation reports according to main standards
e) Rendering
Finite Element Analysis
a) Linear and non-linear stress analysis, including Vibration analysis, Buckling
verification and Elastoplastic structural analysis; Fatigue verification; Heat
transfer; Steel structures seismical verification
Table of of Engineering Services (1 of 4)
©StephensonAcademy 2017. All rights reserved 6
Progress to excellence
Service
Code
Title Description
E-300 Offshore
Structural
design
Design of steel structures for application in the industrial, marine and offshore
field (including static and dynamic analyses – seismic, fatigue), as:
a) Vessel hull reinforcement
b) Pipelayer stingers and handling systems
c) Platforms, topsides and modules (decks, bridges, flares, process plants,
accommodation modules, jackets, etc...)
d) Underwater templates and manifolds
e) Design of seafastening for onshore and offshore transportation
f) FEM modelling and analyses of special items and components, including
special applications where high loads are involved (e.g. non linear, contacts,
composite materials, elasto-plastic behaviour, buckling / dynamic / thermal
effects, large deflection analysis; study of hyperelastic materials)
Table of of Engineering Services (2 of 4)
©StephensonAcademy 2017. All rights reserved 7
Progress to excellence
Table of of Engineering Services (3 of 4)
Service
Code
Title Description
E-400 Design of
Equipment for
the Oil&Gas
industry
(provision of
complete
package)
Design of offshore equipment, from conceptual to detailed design including
provision of manufacturing drawing, FAT and Commissioning Procedure and
User and Maintenance Manuals, as:
a) underwater machines
b) subsea tools and plates
c) deck equipment (Winches, Tensioners, Clamps, Reel Hub Drives, Carousels,
etc...)
E-500 Pipeline design Desin of pipelines (routing, free spans analysis, on bottom stability, strength
and buckling analyses, layability studies, etc)
E-600 Naval/
hydrodynamic/
marine
Hydrostatic and hydrodynamic analysis of any kind of offshore and marine
structure
Design of FPSO mooring and loading systems
Development and analyses of marine operations procedures
Design and analysis of rigid and flexible risers, hoses, umbilicals and cables
©StephensonAcademy 2017. All rights reserved 8
Progress to excellence
Table of of Engineering Services (4 of 4)
Service
Code
Title Description
E-700 Hydraulic
power and
systems
Design of hydraulic systems, hydraulic power units, hydraulic cylinders.
Design of hydraulic blocks
Detail engineering including selection of hydraulic components
E-800 Electrical
power and
control
systems
Electrical Power system engineering
Electrical distribution
Control system engineering
Detail engineering including selection of components
©StephensonAcademy 2017. All rights reserved 9
Progress to excellence
Working toolsStephenson Academy uses for its
design activities standard office
equipment (personal computer,
notebooks, printers, etc), operating
under WindowsXP platform.
Following software tools are
normally used – in case required
Stephenson Academy is available
to provide further software
pacakges.
Description Software
Modelling anddrawing Autocad
CREO parametric 3.0 (Ec PRO-E)
Draftsight
INVENTOR
Simulation Mechanical (Autodesk)
Solidworks
Calculations ANSYS PRO NLS V.15
ANSYS Spaceclaim
Aqwa/Ansys
Caesar II
FEMAP – NASTRAN
Flexcom
GT Strudl / Gt Selos 33
LS-Dyna
MOSES - basic package
Orcaflex
SACS
SESAM - Genie package
SESAM - HydroD package
SESAM - HydroD package
Shear7
WAMIT
©StephensonAcademy 2017. All rights reserved 10
Progress to excellence
Professional figuresStephenson Academy operates with a specialized internal team plus has
developed partnerships with other local and international Companies,
active in all type of engineering services, to provide a full integrated
design service for any kind of device or equipment
All our engineers and technicians have consolidated experience in the
respective field of competence, acquired as employees of important
companies and as freelances:
PM - Coordinator: at least 20 years’ experience
Dsicipline specailist: at least 15 years’ experience
Senior Engineer: at least 6 years’ experience
Junior Engineer: at least 3 years’ experience
2D / 3D CAD draughtman Senior: at least 6 years’ experience
2D / 3D CAD draughtman Junior: at least 3 years’ experience
www.stephensonacademy.com
©StephensonAcademy 2017. All rights reserved
Progress to excellence
11