Providing Precision Prototyping Systems Worldwide · PDF fileProviding Precision Prototyping Systems Worldwide for Over 30 Years Page 2 Quick Circuit - PCB prototyping systems Page

Providing Precision Prototyping Systems Worldwide for Over 30 Years

Page 2 Quick Circuit - PCB prototyping systems

Page 4-17 QCJ5

Page 18-21 QC12000

Page 22-25 QC9000

Page 26-29 QC7000

Page 30-33 QC5000

Page 34-35 QC3000

Page 36-41 Quick Circuit Maintenance Parts

Page 42-46 Quick Circuit Upgrades

Page 47 Multi-:Layer PCB systems

Page 48-49 Quick Press Multi-Layer Press

Page 50 Quick Plate – through-hole plating

Page 51 QP912 and QP1812

Page 52 Multi-Layer Layup kits (4-8 Layers)

Page 53 Reflow and Laboratory Ovens

Page 54 Surface Mount Reflow Oven A

Page 55 Surface Mount Reflow Oven B

Page 56 Laboratory Oven C (Gravity Convection)

Page 57 Enclosures and Stands

Page 58 QCJ5 Stand

Page 59 Quick Circuit Stand (All Models)

Page 60 QC3000 Stand and Enclosure Combination

Page 61 Quick Circuit Enclosures (All Models)

Page 62 T-Tech HEPA Vacuums, Bags and Filters

Page 63 Dual Hepa Vacuum 115V/230V

Page 64 Single Hepa Vacuum 115V/230V

Page 65-66 Air Compressor

Page 67-77 Tools and Materials

Drill Bits End mills Routers T-Mills Board Material

T-Tech, Inc.

510 Guthridge Ct.

Norcross, Georgia 30092

U.S.A

www.t-tech.com

[email protected]

Phone: 770-455-0676

Fax; 770-455-0676

http://www.t-tech.com/

mailto:[email protected]

About T-Tech Celebrating our 30th year of experience serving the industry, T-Tech, Inc. has evolved into the nation's leading manufacturer of printed circuit board prototyping systems with thousands of systems in the field. Our customers range from some of the world's largest corporations and research institutions to small businesses. With clients in over 46 countries, T-Tech, Inc. has developed a worldwide reputation for precision, quality, and service. T-Tech, Inc. has long been considered an industry innovator. T-Tech works closely with commercial and educational sectors around the world to support electronic design and research for analog, digital, and RF and microwave applications in sectors including Aerospace, Defense, and Telecommunications. T-Tech, Inc. continues to evaluate its customers' prototyping requirements in order to design new products that meet the industry's changing demands. In addition to the design and manufacture of the Quick Circuit system in Norcross, Georgia, the company develops and supports its own software. By manufacturing and offering products such as the Quick Plate through hole plating system, SMT Assembly Equipment and more, T-Tech provides all the resources required for in-house circuit board prototyping. T-Tech, Inc. is proud of its innovative approach to customer service. Unlimited technical support after the sale and free updates on documentation are all standard for T-Tech. Post sale customer visits by our staff keep us in touch with ongoing changes in our customers' prototyping requirements and help to maintain our valued relationships. Quick Circuit Systems T-Tech designs our Quick Circuit prototyping systems with the engineer's valuable time in mind. Intelligent data conversion software, simple setup and use, and unlimited technical support are a few of the ways T-Tech has achieved the satisfaction of thousands of customers! The Quick Circuit is a desktop prototyping solution used in the design and fabrication phase of a prototype product. In-house prototyping will save your company both time and money. Quick Circuit...Design it this morning, and test this afternoon! Quick Circuit prototyping systems mill away unwanted copper creating your circuit board by leaving pads and traces. Quickly produce accurate circuit board prototypes directly from your CAD data. Import Gerber, DXF, and Excellon files. Drill, mill, and route traces and spaces as fine as 0.004". Quick Circuit is the perfect solution for producing analog, digital, or RF/microwave prototypes. Quick Circuit systems offer a variety of options including; automatic tool change, software controlled depth of cut, front control panel for common system commands, 24K-100K spindle speeds, a wide range of table sizes, electronic, pneumatic, or stepper motor controlled Z-axis, air bearing pressure foot, fiducial recognition, and fully integrated vacuum table.

QCJ5

QC 12000

QC 9000

QC 7000

QC 5000

QC 3000

http://t-techtools.com/store/index.php?main_page=index&cPath=14_16






Quick Circuit precision prototyping systems

QCJ5

QC 12000

QC 9000

QC 7000

QC 5000

QC 3000







QCJ5 setting the NEW standard for in-house prototyping!

12, 24 or 32-Position Automatic Tool Change Projects run unattended and uninterrupted, adding valuable time back into an Engineer’s day. ContactByTouch® Automatic Depth Sensing Software controlled depth of cut settings, ensuring the highest level of precision and accuracy in all milling procedures. CheckByTouch® Broken Tool Detection and software enabled tool management including linking 3 Axis Motion Pocket mill microwave boards, de-panel, repair circuit boards, fabricate enclosures, or create panels and housings. JVision® Fiducial Recognition and Alignment

Automatically Align circuit boards for multilayer production or rework with IsoPro® 3.1 software managed fiducial recognition. ALCOA MIC6® Fully Integrated Precision Vacuum Table Secure materials to the precision flat surface ensuring accurate depth of cut and reducing damage to fragile prototypes. 60,000 or 100,000 RPM Variable Speed Spindle Available with a choice of 60,000 or 100,000 rpm high performance variable speed spindles. 4 Mil Trace and Insulation Width Create resolutions as fine as .004 mm (.00025”) with traverse speeds as high as 150 in/min. Pre-Touch® Pressure Foot Pre-Touch system applies evenly distributed pressure to the substrate prior to the drilling or milling operation. Integrated Front-Panel Controls Front panel controls provide the convenience of local access to common system commands.

QCJ5…In-House Prototyping Simplified!

QCJ5the intelligent solution

T-Tech, Inc. 510 Guthridge Ct. Norcross, GA. USA 30092 Phone 770.455.0676 800.370.1530 Fax 770.455.0970 Email [email protected] Website http://www.t-tech.com

Features QCJ5-60 QCJ5-100 RPM - Software Controlled 0-60,000 0-100,000

3 Phase Spindle Power 300 Watts 300 Watts

Smallest Drill Size .15mm (0.004”) 0.1mm (0.004”)

Smallest Mill Size .15mm (0.004”) 0.1mm (0.004”)

Milling Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)

Traverse Speed 3,800mm/min (150”/min) 3,800mm/min (150”/min)

Drilling Speed 180 Holes/min 180 Holes/min

Routing Speed 3,800mm/min (150”/min) 4,500mm/min (180”/min)

Material Size 35cm x 40cm (14”x16”) 35cm x 40cm (14”x16”)

Work Area 25x33x88 cm (10x13x3.5”) 25x33x88 cm (10x13x3.5”)

Resolution 0.012mm (0.0005”) 0.006mm (0.00025”)

Repeatability 0.008mm (0.00036”) 0.004mm (0.00018”)

Stroke Z-Axis 76mm (3.0”) 76mm (3.0”)

Machine Voltage 80-245 Volts 50/60Hz 80-245 Volts 50/60Hz

Machine Dimensions 66x66x50cm (26x26x20”) 66x66x50cm (26x26x20”)

Machine Weight 45 kg (99 lbs) 49 kg (108 lbs)

Automatic Tool Change 12, 24, or 32 Tools 12, 24, or 32 Tools

Axis Motion Control X,Y, Z Axis Stepper Motor X,Y, Z Axis Stepper Motor

Automatic Depth Control Standard Standard

Fiducial Recognition & Alignment Standard Standard

Front Panel Controls Standard Standard

Pressure Foot System Pre-Touch Pre-Touch

Vacuum Table Fully Integrated Fully Integrated

Sound Enclosure Integrated Integrated

Air Requirements 95 psi 95 psi

Windows Requirements 1.5Ghz Processor 1GB RAM

Windows XP, Windows 7

1.5Ghz Processor 1GB RAM

Windows XP, Windows 7

QCJ5 the intelligent solution

Introducing the new Quick Circuit QCJ5 - T-Tech’s advanced PCB Prototyping system! The QCJ5 delivers the precision, the speed, and automation required to take your prototyping capabilities to the next level.

Empower yourself with these QCJ5 standard features!

• 3 axis motion with 3.0” of z-axis travel • JVision® fiducial recognition and alignment • 12, 24 or 32 position automatic tool change • Front Panel and Software Controls

• ContactByTouch® automatic depth control • 60,000 or 100,000 rpm spindle

• CheckByTouch® tool detection w/linking • ALCOA MIC6® integrated precision vacuum table

• PreTouch® pressure foot • 254mm x 330mm (10” x 13”) work surface

• Integrated sound enclosure • IsoPro® 3.1 software

The Quick Circuit QCJ5 advantage

Automatic Tool Change Engineers have a critical need to reduce the time required to design and create circuit board prototypes. The Quick Circuit QCJ5 offers engineers automated tool changing system choices ranging up to 32 positions. Automatic Tool Change allows your system to run unattended and uninterrupted, providing time savings up to 400%, adding valuable time back into an engineer’s day.

3rd

Axis Motion Control 3

rd

Axis motion control empowers Engineers with increased ability to approach requirements that standard XY milling machines are incapable of. Depanel populated boards, repair circuit boards, fabricate microwave enclosures as well as pocket milling for microwave applications to name a few. The QCJ5 provides Engineers with the ability to take prototypes further down the design to test path in house.

JVision® Fiducial Recognition and Alignment JVISION® fiducial recognition provides QCJ5 prototyping system users with the ability to align a circuit board for multilayer production or rework, through the use IsoPro® 3.1 software managed fiducial recognition. The JVISION® method of fiducial recognition alignment provides alignment accuracy that is not available on a pin-only alignment system. JVISION® fiducial recognition and alignment capabilities, combined with the QCJ5’s 3.0 inches of vertical z-axis travel, provides users with the ability to easily de-panel populated SMT circuit boards. IsoPro® 3.1 Software T-Tech’s industry leading IsoPro® 3.1 software allows users to become productive immediately. View and edit standard CAD output, create single or multiple isolation paths, specify partial or complete copper removal. Improved optimization reduces mill, drill and routing time. View machine status in real time with the new machine status bar. IsoPro provides a simple to learn method of controlling milling, drilling and routing procedures. This industry leading intuitive software program comes with the purchase of any Quick Circuit QCJ5 System, and is available for download at www.t-tech.com. Upgrade your system today!

QCJ5 the intelligent solution

Accelerated Precision and Accuracy The Quick Circuit QCJ5 is capable of producing resolutions as fine as .006 mm (.00025”) at traverse speeds as high as 150 inches per minute. Improve the quality of your fine pitched SMT, R/F Microwave, high speed digital and soft substrate designs. Achieve the ultimate in precision, accuracy and quality at maximum speeds!

ContactByTouch® Automatic Depth Control The Quick Circuit QCJ5 provides software controlled depth of cut settings, ensuring precision and accuracy in all milling procedures. ContactByTouch® automatic depth control allows users to enter depth of cut values directly into software data fields, eliminating the need for manual settings and feeler gauges.

PreTouch® Pressure Foot System The Quick Circuit QCJ5 features a state of the art pneumatic pressure foot that applies evenly distributed pressure to the substrate prior to the drilling or milling operation. The PreTouch® technique secures the material to the table prior to determining material height, or entry of a selected milling tool. Our clients are able to drill 100 micron-.004” holes with controlled feed rates and precision. The ability to easily and precisely regulate the pressure applied makes the QCJ5 system ideal for working with delicate materials such as Rogers TMM, RO3000/4000/5000/6000, and other soft or flexible circuit board materials.

CheckByTouch® Tool Detection

The QCJ5 allows you to mill with confidence. The CheckByTouch® function allows you to replace broken tools automatically. Simply link common replacement tools through the IsoPro 3.0 software and should a tool break, the system will automatically deposit the broken tool, pick up a new replacement and continue milling.

ALCOA MIC6® Fully Integrated Precision Vacuum Table Our precision flat vacuum table allows users to create prototypes on standard, exotic, thin or flexible materials with greater precision. The combination of our matched PreTouch® pressure foot and integrated vacuum table ensure that any material is held secure and precision flat, greatly increasing the ability to create a consistent depth of cut on analog, digital, RF/Microwave, or small fragile prototypes.

Integrated Sound Enclosure The integrated Sound Enclosure encapsulates the Quick Circuit with sound dampening acoustical foam, reducing noise level to a quite 63db while providing a safe environment for the Quick Circuit system.

T-Tech’s lifetime technical and software support are standard with all Quick Circuit systems!

QCJ5 the intelligent system

QCJ5 features:

• Automatic Tool Change – 12, 24 or 32 positions • 60,000 or 100,000 rpm spindle • 3 Axis Motion Control • ContactByTouch® Automatic Depth Control • CheckByTouch® Tool detection • PreTouch® Pressure Foot • Fully Integrated Precision Vacuum Table • Front Panel Controls • Integrated Sound Enclosure

QCJ5 ContactByTouch® • The Quick Circuit QCJ5 ContactByTouch® automatic depth control allows users to enter depth of cut values directly into software data fields, eliminating the need for manual settings and feeler gauges. • The QCJ5 ContactByTouch® method begins with each required tool moving to a point on the actual material being milled, touching the material in two locations, and registering the true offset of the material from the QCJ5 table height. This process occurs each time a new milling tool is required, providing a real time measurement of the material offset as the prototype is being milled. • Depth of cut values are entered into the software for each tool by the user. The QCJ5 mills from the value that is provided by the ContactByTouch® method producing extremely precise and consistent depth of cut results.f cut results.

QCJ5 CheckByTouch®

• The Quick Circuit QCJ5 CheckByTouch® tool detection provides users with the ability to mill with confidence •The CheckByTouch® method will detect when tool breakage occurs during the milling process •Tools can be linked for automatic replacement when tool breakage occurs. depth of cut results.

QCJ5 PreTouch® pressure foot

• The Quick Circuit QCJ5 PreTouch® pressure foot provides increased accuracy in all milling processes •The PreTouch® pressure foot makes contact with the material prior to all tooling procedures ensuring that all material is precision flat prior to all milling procedures. •The amount of pressure applied by the PreTouch® pressure foot may be varied based on the material being milled. Increased pressure for thicker substrates, reduced for thin/flexible materials •Pressure can be easily adjusted on the front control panel

QCJ5 Precision Vacuum Table

• The Quick Circuit QCJ5 is equipped standard with a fully integrated precision vacuum table • Precision flat vacuum table is machined from ALCOA MIC6 ® cast aluminum plate • Vacuum table flatness tolerance is maintained within .015"

QCJ5 Front Panel Controls

The QCJ5 is the only desktop milling system to provide the convenience of front panel control of common system commands. •Home Position •System Pause •X/Y Jog Continuous or Incremental •Jog Feed Rate •Mill Feed Rate •Spindle RPM Adjustment •Drill Feed Rate •Z-Axis Up /Down •Pressure Foot Up/Down •Pressure Foot Up/Down Force Adjustment •Vacuum Table 4 Zone Selection •Material Change.

QCJ5 Front Panel Controls

• Reduces the need to move from computer work station to the PCB milling station to make adjustments.

• Provides interface with milling system for automated QCJ5 features.

• Control panel functions are also available in the IsoPro® 3.1 software.

QCJ5 JVision® Fiducial Recognition and Alignment

• IsoPro® 3.1 and the powerful QCJ5 JVision Camera work together to automatically align prototypes with your digital data for rework, de-paneling and more.

• Complete your prototype and test. If rework of your board is required, JVision allows you to accurately and confidently align your prototype for further refinement.

QCJ5 the intelligent system

http://www.rfglobalnet.com/article.mvc/Demo-T-Tech-QCJ5-PCB-Prototyping-System-0001

http://www.rfglobalnet.com/article.mvc/Demo-T-Tech-QCJ5-PCB-Prototyping-System-0001

QUICK CIRCUIT QC12000S-F

QC12000S-F - XY Milling Table with 13”x24” Work Area

(shown with optional pneumatic z-axis)

High Speed model includes: 5,000-60,000 RPM Spindle, Cables, Users Manual & Start-Up Kit.

T-Tech's Quick Circuit High Speed Model provides everything you need to produce RF or Microwave circuit board

prototypes within hours. The 13” x 24” extended work area provides ample space for larger projects. The software

controlled high speed spindle provides variable tool speeds between 5,000 and 60,000 RPM. The high speed precision spindle produces the precise geometry required when creating RF and microwave prototypes. Higher

spindle speeds provide extended tool life and faster XY traverse speeds.

This system is equipped standard with IsoPro® software, which enables automatic data conversion from almost any CAD package, and has the ability to import DXF, and export Gerber data.

Common Applications: RF/Microwave, Analog, Digital

Optional Upgrades: Pneumatic Z-Axis, Vacuum table, Air Bearing Pressure Foot

QC MODEL 12000S-F SYSTEM SPECIFICATIONS

SPECIFICATIONS QC 12000S-F Spindle Speed RPM 5,000-60,000 RPM Software Controlled Variable Speed Machine Weight 24kg (53 lbs) Smallest Drill Hole Size 0.2mm (0.008”) Max. Milling Speed 3.82 (150”) /min Max. Traverse Speed 3.82 (150”) /min Drilling Speed/Solenoid or Air 150 or 160 Max. Routing Speed 3.82 (150”) min Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004” / 0.004”) Material Size 40cm x 61cm (16” x 29”) Board Work Area 33cm x 48cm (13” x 24”) Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Minimum Trace/Space Power Supply Computer Requirement Supported File Formats

3.175mm (0.125” Shank Diameter) Industrial Standard 0.006mm (0.00025”) 0.006mm (0.00025”) 5mm (0.2”) w/Solenoid; 16mm (0.630”) w/Air Cylinder 16mm (0.630”) 17mm (0.670”) 0.100 mm / 0.100 mm (0.004” / 0.004”) 100-240 Volt, 50-60Hz Windows 2000, XP, or Windows 7 Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF

QUICK CIRCUIT QC12000S-E

QC12000S-E - XY Milling Table with 13”x24” Work Area (shown with optional pneumatic z-axis) Standard model includes: 8-24K, or 5-60K RPM Spindle, Cables, User Manual & Start-Up Kit. Affordable and economical, T-Tech's Quick Circuit Standard Model provides everything you need to produce circuit board prototypes within hours. Available with 8,000-24,000 or 5,000 -60,000 rmp software controlled spindle speeds. making it an excellent fit for many applications. The QC12000 series is equippedstandard with IsoPro software, which enables automatic data conversion from all CAD packages. IsoPro software is designed to be intuitive, eliminating lengthy learning curves for the engineer. IsoPro software also provides users with the ability to import DXF and export Gerber data. Commonly used for: Power Supplies, Analog Circuits, Digital, RF, or Microwave applications

Optional Upgrades: 5-60K variable speed spindle, pneumatic z-axis, vacuum table, air bearing pressure foot, trace cam

QC MODEL 12000S-E SYSTEM SPECIFICATIONS

SPECIFICATIONS QC 12000S-E Spindle Speed RPM 8-23K RPM Software Controlled Variable Speed Machine Weight 24kg (53 lbs) Smallest Drill Hole Size 0.2mm (0.008”) Max. Milling Speed 3.82 (150”) /min Max. Traverse Speed 3.82 (150”) /min Drilling Speed/Solenoid or Air 150 or 160 Max. Routing Speed 3.82 (150”) min Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004” / 0.004”) Material Size 40cm x 61cm (16” x 29”) Board Work Area 33cm x 48cm (13” x 24”) Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Minimum Trace/Space Power Supply Computer Requirement Supported File Formats

3.175mm (0.125” Shank Diameter) Industrial Standard 0.006mm (0.00025”) 0.006mm (0.00025”) 5mm (0.2”) w/Solenoid; 16mm (0.630”) w/Air Cylinder 16mm (0.630”) 17mm (0.670”) 0.100 mm / 0.100 mm (0.004” / 0.004”) 100-240 Volt, 50-60Hz Windows 2000, XP, or Windows 7 Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF


QC9000S-F XY Milling Table with 19”x19” Work Area High Speed model includes: 5-60K RPM Spindle, Cables, Users Manual & Start-Up Kit. T-Tech's Quick Circuit High Speed Model provides everything you need to produce RF or Microwave circuit board prototypes within hours. The large 19” x 19” work area provides ample space for larger projects. The software controlled high speed spindle provides variable tooling speeds between 5,000 and 60,000 RPM. The high speed precision spindle produces the smoother cuts required when creating RF and microwave prototypes. The higher spindle speeds also provide extended tool life and faster XY traverse speeds. This system is equipped standard with IsoPro software, which enables automatic data conversion from almost any CAD package. IsoPro software is designed to be intuitive, eliminating lengthy learning curves. IsoPro software has the ability to import DXF, and export Gerber data. Commonly used in: RF/Microwave applications, research and development laboratories Optional Upgrades: Pneumatic Z-Axis, Vacuum Table, Air Bearing Pressure Foot, Trace-Cam

QQQCCC999000000000SSS---FFF Spindle Speed RPM 5,000-60,000 RPM

Software Controlled Spindle Variable Speed

Machine Weight 36kg (80 lbs)

Smallest Drill Hole Size 0.2mm (0.008”)

Max. Milling Speed 3.82 (150”) /min

Max. Traverse Speed 3.82 (150”) /min

Drilling Speed Solenoid /Air 150 /160

Max. Routing Speed 3.81m (150”) min

Torque 2.8 N-cm (4oz-in)

Average Hits Per Bit 11,000

Minimum Trace Minimum Space

0.100mm / 0.100mm (0.004” / 0.004”) 0.100mm / 0.100mm (0.004” / 0.004”)

Material Size Work Area Machine Dimensions

54cm x 61cm (21” x 24”) 48cm x 48cm (19” x 19”) 62cm x 71cm x 26cm (25.3” x 28” x 10”)

Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Power Supply Computer Requirement Supported File Formats Works With all CAD Software

3.175mm (0.125” Shank Diameter) Industrial Standard 0.006mm (0.00025”) 0.006mm (0.00025”) 5mm (0.2”) w/Solenoid; 16mm (0.630”) w/Air Cylinder 16mm (0.630”) 17mm (0.670”) 100-240 Volt, 50-60Hz Windows 2000 or XP Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF Accel, Allegro, AutoCAD, Eagle PCB, EEsof, Expedition, Genesys, HFSS, Mentor Board Station, OrCAD, PADS, Protel, Tango Utiliboard.

Optional Upgrades: 60,000rpm spindle, Pneumatic Z-Axis, Pneumatic Pressure Foot, Vacuum Table

With a work area of 480mm x 480mm (19” x 19”) the Quick Circuit QC9000S-F is one of the largest in the industry. It’s generous work area allows for prototyping of large antenna and back plane designs, as well as traditional analog and RF/Microwave circuit boards. All Quick Circuit precision prototyping systems include T-Tech’s industry leading IsoPro software for automatic data conversion of most any CAD package.

*shown with optional pneumatic z-axis


QC9000S-E XY Milling Table with 19”x19” Work Area Standard model includes: 8-23K RPM Spindle, Cables, Users Manual & Start-Up Kit. Affordable and economical, T-Tech's Quick Circuit Standard Model provides everything you need to produce circuit board prototypes within hours. The Standard Model has software controlled spindle speeds that allow variable motor speeds between 8,000 and 23,000 RPM making it an excellent fit for many applications. With a 19” x 19” work area, you can prototype on a grand scale! This system also comes standard with IsoPro software, which enables automatic data conversion from almost any CAD package. The software is designed to be intuitive, eliminating lengthy learning curves. IsoPro software also has the ability to import DXF and export Gerber data. Commonly used in: Education, Power Supplies, Analog Circuits, Low Speed Digital

Optional Upgrades: 5-60K Variable Spindle, Pneumatic Z-Axis, Vacuum Table, Air Bearing Pressure Foot, Trace-Cam

QQQCCC999000000000SSS---EEE Spindle Speed RPM 8,000-24,000 RPM

Software Controlled Spindle Variable Speed

Machine Weight 36kg (80 lbs)

Smallest Drill Hole Size 0.2mm (0.008”)

Max. Milling Speed 3.82 (150”) /min

Max. Traverse Speed 3.82 (150”) /min

Drilling Speed Solenoid /Air 150 /160

Max. Routing Speed 3.81m (150”) min

Torque 2.8 N-cm (4oz-in)

Average Hits Per Bit 11,000

Minimum Trace Minimum Space

0.100mm / 0.100mm (0.004” / 0.004”) 0.100mm / 0.100mm (0.004” / 0.004”)

Material Size Work Area Machine Dimensions

54cm x 61cm (21” x 24”) 48cm x 48cm (19” x 19”) 62cm x 71cm x 26cm (25.3” x 28” x 10”)

Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Power Supply Computer Requirement Supported File Formats Works With all CAD Software

3.175mm (0.125” Shank Diameter) Industrial Standard 0.006mm (0.00025”) 0.006mm (0.00025”) 5mm (0.2”) w/Solenoid; 16mm (0.630”) w/Air Cylinder 16mm (0.630”) 17mm (0.670”) 100-240 Volt, 50-60Hz Windows 2000 or XP Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF Accel, Allegro, AutoCAD, Eagle PCB, EEsof, Expedition, Genesys, HFSS, Mentor Board Station, OrCAD, PADS, Protel, Tango Utiliboard.

Optional Upgrades: 60,000rpm spindle, Pneumatic Z-Axis, Pneumatic Pressure Foot, Vacuum Table

With a work area of 480mm x 480mm (19” x 19”) the Quick Circuit QC9000S-E is one of the largest in the industry. It’s generous work area allows for prototyping of large antenna and back plane designs, as well as traditional analog and RF/Microwave circuit boards. All Quick Circuit precision prototyping systems include T-Tech’s industry leading IsoPro software for automatic data conversion of most any CAD package.

*shown with optional pneumatic z-axis


QC7000S-F XY Milling Table with 13”x19” Work Area *(Shown with optional pneumatic pressure foot and air actuated z-axis) High Speed model includes: 5-60K RPM Spindle, Cables, Users Manual & Start-Up Kit. T-Tech's Quick Circuit High Speed Model provides everything you need to produce RF or Microwave circuit board prototypes within hours. The large 13” x 19” work area provides ample space for larger projects. The software controlled high speed spindle provides variable motor speeds between 5,000 and 60,000 RPM. The high speed spindle produces the smoother cuts required when creating RF and microwave prototypes. The higher spindle speed also provides extended tool life and faster milling speeds. This system is equipped standard with IsoPro software, which enables automatic data conversion from almost any CAD package. IsoPro software is designed to be intuitive, eliminating lengthy learning curves. IsoPro software has the ability to import DXF and export Gerber data. Commonly used in: RF/Microwave applications, research and development laboratories

Optional Upgrades: Pneumatic Z-Axis, Vacuum Table, Air Bearing Pressure Foot, Trace-Cam


SPECIFICATIONS QC 7000S-F Spindle Speed RPM 5-60K RPM Software Controlled Variable Speed Machine Weight 24kg (53 lbs) Smallest Drill Hole Size 0.2mm (0.008”) Max. Milling Speed 3810mm (150”) /minute Max. Traverse Speed 3810mm (150”) /minute Drilling Speed Solenoid or Air Solenoid -3810mm (150")/minute or Air- 4064mm (160")/minute Max. Routing Speed 3810mm (150”) /minute Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004” / 0.004”) Material Size 40cm x 61cm (16” x 24”) Board Work Area 33cm x 48cm (13” x 19”) Machine Dimensions 48cm x 71cm x 26cm (15.3” x 17” x 10”) Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Minimum Trace/Space Power Supply Computer Requirement Supported File Formats

3.175mm (0.125” Shank Diameter) Industrial Standard 0.006mm (0.00025”) 0.006mm (0.00025”) 5mm (0.2”) w/Solenoid; 16mm (0.630”) w/Air Cylinder 16mm (0.630”) 17mm (0.670”) 0.100 mm / 0.100 mm (0.004” / 0.004” 100-240 Volt, 50-60Hz Windows 2000 or XP Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF


QC7000 - XY Milling Table with 13”x19” Work Area (shown with optional pneumatic z-axis) Standard model includes: 8-23K RPM Spindle, Cables, Users Manual & Start-Up Kit. Affordable and economical, T-Tech's Quick Circuit Standard Model provides everything you need to produce circuit board prototypes within hours. The Standard Model has software controlled spindle speeds allowing variable motor speeds between 8,000 and 23,000 RPM making it an excellent fit for many applications. This system also comes standard with IsoPro software, which enables automatic data conversion from almost any CAD package. The software is designed to be intuitive, eliminating lengthy learning curvesto the engineer. The software also has the ability to import DXF and export Gerber data. Commonly used in: Education, Power Supplies, Analog Circuits, Low Speed Digital

Optional Upgrades: 5-60K variable speed spindle, pneumatic z-axis, vacuum table, air bearing pressure foot, trace cam


SPECIFICATIONS QC 7000S-E Spindle Speed RPM 8-23K RPM Software Controlled Variable Speed Machine Weight 24kg (53 lbs) Smallest Drill Hole Size 0.2mm (0.008”) Max. Milling Speed 3.82 (150”) /min Max. Traverse Speed 3.82 (150”) /min Drilling Speed/Solenoid or Air 150 or 160 Max. Routing Speed 3.82 (150”) min Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004” / 0.004”) Material Size 40cm x 61cm (16” x 24”) Board Work Area 33cm x 48cm (13” x 19”) Machine Dimensions 48cm x 71cm x 26cm (15.3” x 17” x 10”) Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Minimum Trace/Space Power Supply Computer Requirement Supported File Formats



QC5000S-F XY Milling Table with 10”x13” Work Area *(Shown with optional pneumatic pressure foot and air actuated z-axis) Standard model includes: 5-60K RPM Spindle, Cables, Users Manual & Start-Up Kit. T-Tech's Quick Circuit High Speed Model provides everything you need to produce RF or Microwave circuit board prototypes within hours. The software controlled high speed spindle provides variable motor speeds between 5,000 and 60,000 RPM. The higher speeds produce the smooth and precise cuts required to create RF and Microwave prototypes. Additional high speed spindle benefits include; extended tool life and faster milling speeds. This system is equipped standard with IsoPro software, which enables automatic data conversion from almost any CAD package. The software is designed to be intuitive, eliminating lengthy learning curves. IsoPro software has the ability to import DXF and export Gerber data. Commonly used in: RF/Microwave applications, research and development laboratories

Optional Upgrades: Pneumatic Z-Axis, Vacuum Table, Air Bearing Pressure Foot, Trace-Cam


SPECIFICATIONS QC 5000S-F Spindle Speed RPM 5-60K RPM Software Controlled Variable Speed Machine Weight 24kg (53 lbs) Smallest Drill Hole Size 0.2mm (0.008”) Max. Milling Speed 60 ipm (1.5 m) Max. Traverse Speed 60 ipm (1.5 m)Drilling Speed/Solenoid or Air 60 ipm (1.5 m) Max. Routing Speed 3.82 (150”) min Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004” / 0.004”)

Board Work Area Machine Dimensions

25cm x 33cm (10” x 13”) (15.3” x 17” x 10”)

Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Minimum Trace/Space Power Supply Computer Requirement Supported File Formats



QC5000 - XY Milling Table with 10”x13” Work Area Standard model includes: 8,000-24,000 RPM Spindle, Cables, Users Manual & Start-Up Kit. Affordable and economical, T-Tech's Quick Circuit Standard Model provides everything you need to produce circuit board prototypes within hours. The Standard Model has software controlled spindle speeds allowing variable motor speeds between 8,000 and 24,000 RPM, making it an excellent fit for many applications. This system also comes standard with IsoPro software, which enables automatic data conversion from almost any CAD package. The software is designed to be intuitive, eliminating lengthy learning curves for the engineer. IsoPro software also has the ability to import DXF and export Gerber data. Commonly used in: Education, Power Supplies, Analog Circuits, Low Speed Digital



SPECIFICATIONS QC 5000S-E Spindle Speed RPM 8,000-24,000 RPM Software Controlled Variable Speed Machine Weight 24kg (53 lbs) Smallest Drill Hole Size 0.2mm (0.008”) Max. Milling Speed 60 ipm (1.5 m) Max. Traverse Speed 60 ipm (1.5 m)Drilling Speed/Solenoid or Air 60 ipm (1.5 m) Max. Routing Speed 3.82 (150”) min Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004” / 0.004”)

Board Work Area Machine Dimensions

25cm x 33cm (10” x 13”) (15.3” x 17” x 10”)


3.175mm (0.125” Shank Diameter) Industrial Standard 0.006mm (0.00025”) 0.006mm (0.00025”) 5mm (0.2”) w/Solenoid; 16mm (0.630”) w/Air Cylinder 16mm (0.630”) 17mm (0.670”) 0.100 mm / 0.100 mm (0.004” / 0.004”) 100-240 Volt, 50-60Hz Windows 2000 or XP Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF


QC3000S-E - XY Milling Table with 6”x13” Work Area Standard model includes: 8,000-24,000 RPM Spindle, Cables, Users Manual & Start-Up Kit. Affordable and economical, T-Tech's Quick Circuit QC3000 Standard Model provides everything you need to produce circuit board prototypes within hours. The Standard Model has a software controlled spindle allowing variable motor speeds between 8,000 and 24,000 RPM making it an excellent fit for many applications. This system also comes standard with IsoPro software, which enables automatic data conversion from almost any CAD package. The software is designed to be intuitive, eliminating lengthy learning curves for the engineer. IsoPro software also has the ability to import DXF and export Gerber data. Common applications: Education, Power Supplies, Analog Circuits, Low Speed Digital


QC MODEL 3000S-E

SPECIFICATIONS QC 3000S-E Spindle Speed RPM 8-24K RPM Software Controlled Spindle Variable Speed Smallest Drill Hole Size 0.2mm (0.008”) Max. Milling Speed 3.82 (150”) /min Max. Traverse Speed 3.82 (150”) /min Drilling Speed/Solenoid or Air 150 or 160 Tool Change Semi-Automatic / Software Prompting Tool Holder Standard 1/8” LED Head Light Standard Max. Routing Speed 3.82 (150”) min Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004” / 0.004”) Material Size Board Work Area Machine Dimensions

35cm x 40cm (14” x 16”) 150mm x 300mm (6” x 12”) (15.3” x 17” x 10”)


3.175mm (0.125” Shank Diameter) Industrial Standard 0.006mm (0.00025”) 0.006mm (0.00025”) 5mm (0.2”) w/Solenoid; 16mm (0.630”) w/Air Cylinder 16mm (0.630”) 17mm (0.670”) 0.100 mm / 0.100 mm (0.004” / 0.004”) 100-240 Volt, 50-60Hz Windows 2000 or XP Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF

Available Options 5,000 – 60,000 rpm high speed spindle Trace Cam Sound Enclosure Pneumatic Z-Axis HEPA Vacuum


Quick Circuit Maintenance Parts

Standard Spindle

24,000 rpm

Spindle Motor

24,000 rpm

Z-Axis Solenoid

Lead Screws

Upper/Lower

Stepper Motor

X/Y Axis

Stepper Motor

Z Axis

QUICK CIRCUIT standard spindle

Standard Replacement Spindle T-Tech authorized 8,000 - 24,000 rpm Standard Spindle replacement part. ` Used on QC3000S-E, QC5000S-E,QC7000S-E, QC9000S-E and QC12000S-E

Model: AS-STD-SPINDLE

Shipping Weight: 4lbs

QUICK CIRCUIT replacement motor

Standard Spindle Replacement Motor T-Tech authorized 8,000 - 24,000 rpm Standard Spindle replacement motor. Used on QC3000S-E, QC5000S-E,QC7000S-E, QC9000S-E and QC12000S-E

Model: MOTOR-DRILL-O3

Shipping Weight: 1.75 lbs

QUICK CIRCUIT z-axis solenoid replacement

Solenoid Replacement Z-Axis T-Tech Authorized Z-Axis solenoid replacement part. Used on QC3000S-E, QC5000S-E,QC7000S-E, QC9000S-E and QC12000S-E

Model: SOLE-TUBULAR


QUICK CIRCUIT lead screw replacement

X/Y/Z Replacement Lead Screws T-Tech Authorized X/Y/Z/ Lead Screw replacement parts. Used on designated Quick Circuit models. See Table Below

QC5000 Lower Lead Screw

Model: D-0250-A


QC5000 / QC7000 Upper Lead Screw

Model: D-0252-0


QC7000 / QC9000 Lower lead Screw

Model: D-0251-0


QC7000 / QC9000 Lower lead Screw

Model: D-0251-0


QUICK CIRCUIT stepper motor replacement

Stepper Motor Replacement X/Y and Z T-Tech Authorized X/Y and Z stepper motor replacement parts. Used on designated Quick Circuit models. See Table Below

X / Y axis Stepper Motor

For Use With Quick Circuit Model QC3000, QC5000, QC7000, QC9000, QC12000 and QCJ5 systems.

Model: STEPP-MOTOR-02


Z- Axis Stepper Motor

Model: STEPP-MOTOR-04

Shipping Weight: 3.5lbs


Available Quick Circuit System Upgrades

Vacuum Table

Spindle Speed

60,000 rpm

100,000 rpm

Pneumatic

Pressure Foot

Pneumatic

Z-Axis

Quick Circuit - Vacuum Table

T-Tech utilizes ALCOA MIC 6® Aluminum Cast Plate in the production of our Quick Circuit circuit board prototyping system 4 chambered precision vacuum tables. ALCOA MIC 6® Aluminum Cast Plate is finished to 20 micro-inches typical on both sides. Thickness tolerances are within +/-.005" from nominal on 1/4"- 4". Flatness tolerance is maintained within .015" on 1/4"-5/8" thickness. The use of ½” MIC 6® in the production of T-Tech Quick Circuit vacuum tables provides engineers with the industries most accurate and precise depth of cut available in PCB prototyping systems. T-Tech, Inc. is also the sole manufacturer and supplier of PCB prototype milling machines to offer a vacuum table with four independent vacuum chambers allowing users to direct the flow of air to specific work areas. Quick Circuit Vacuum Table Specifications LINEAR ACCURACY 0.015 in (.381 mm) DISTANCE BETWEEN HOLES 0.500 in (12.7 mm) HOLE SIZE 0.050 in (1.27 mm) MATERIAL MIC-6 Cast Aluminum Plate # OF INDEPENDENT CHAMBERS 4 (Excluding QCJ5 series. Entire table is active) WORK AREA Quick Circuit Model QC5000 10 in X 13 in (254mm X 330 mm) ADVANTAGES SOLID PRECISION FLAT HOLD DOWN FOR THIN AND ELASTIC MATERIALS - PRECISION FLAT HOLD DOWN OF ANY AND ALL SUBSTRATES UTILIZED FOR PROTOTYPING – ABILITY TO DIRECT AIR FLOW TO ANY REQUIRED QUADRANT ENSURING MAXIMUM SECURITY OF SUBSTRATE TO MILLING TABLE - REDUCED SET-UP TIME.

QUICK CIRCUIT spindle motor upgrade

High Speed Spindle Motor T-Tech Authorized High speed 60,000 rpm and 100,000 rpm spindles. Used on designated Quick Circuit models. See Table Below

60,000 RPM spindle motor w/precision tool collet.

For Use With Quick Circuit Model QC5000, QC7000, QC9000 and QC12000

Model: MOTOR-DRILL-04


100,000 RPM spindle motor w/precision tool collet.

For Use With Quick Circuit Model QC5000, QC7000, QC9000 and QC12000

Model: MOTOR-DRILL-06


AIR BEARING PRESSURE FOOT

T-Tech's Air Bearing Pressure Foot provides the ability to make precise depths of cut and finer milling detail, enhancing your ability to work with softer laminated substrates. Microwave, RF, and Digital Prototype Circuits on the Quick Circuit platform. The enhanced Pressure Foot provides a pneumatic air cushion for minimal contact during the milling process, leaving a virtually unmarked surface.

QUICK CIRCUIT pneumatic z-axis

Pneumatic Z-Axis Upgrade T-Tech Authorized Pneumatic Z-Axis Upgrade. The T-Tech Quick Circuit Pneumatic z-axis upgrade maximizes the performance of the Z-Axis movement on Quick Circuit models QC5000, QC7000, QC9000, and QC12000. Outstanding Performance on Soft or Thin Substrates Minimizes Adjustments between Operations Provides precise control of Z-Axis force exerted on material

Model: AIR-CYL-KIT



Multi-Layer products

Multi-Layer

Press

Quick Plate

Plating System

Multi-Layer

Prototype PCB

4,6 or 8 Layer

Layup Kit

QUICK PRESS multi-layer press

5 ton pneumatic PCB multi-layer press Featuring:

10" X 13" Top and bottom heated platens 220V 2KW each Dual digital temperature control and automatic timers Timed heat shut-off with automatic cool down fans Easy access sliding lower heating element Provides 70 programmable presets Timer activated pressing cycle 1.5" Stroke pneumatic design Twin hand activation controls E-stop safety control

QUICK PRESS multi-layer press

Designed to simplify your multi-layer prototyping process!

NEW! - Completely redesigned and easy to use! Create prototype circuit boards with 2, 4, 6, or 8 layers.

This multilayer press features 70 programmable presets, and custom 10" x 13" heated upper and lower platens.

T-Tech designed this press to laminate 9" x 12" panels used on the QC5000 or QCJ5 series prototyping systems.

Quick Plate Thru-Hole Plating Solution

T-Tech offers the Quick Plate system for Thru-hole plating of circuit board prototypes.

The Quick Plate is a single chemical plating tank process for plating through the holes required for

fabrication of double sided and multilayer circuit boards. The available with a maximum panel size of

9" X 12" or 12” X 18”. Quick Plate can through plate a variety of substrates including FR4, FR2, Getek®,

and G10 ®. Chemicals used in the Quick Plate bath have a lifespan of 5 years.

A Single Bath Process

Minimal Footprint for Easy fit

Quick and Economical Process

Minimum Maintenance

Quick Plate® The through-hole plating solution

Specifications QP-912 QP-PLATE-1812 PCB Panel Material Size 9” x 12” 12” x 18” 229 mm x 305 mm 305 mm x 457 mm System Dimensions 30” x 16” x 15” 30” x 18” x 30” (L x W x H) 762 mm x 407 mm x 381 mm 762 mm x 457 mm x 762 mm Power Supply Dimensions 7” x 13” x 18” Included in System Dimensions (L x W x H) 178 mm x 330 mm x 457 mm Shipping Weight 55 Lbs. 175 Lbs. 25 Kg. 79 Kg. Smallest Plating Hole Size 0.016” 0.012”

0.406 mm 0.305 mm Volume of Electrolyte Solution 7.5 Gallons 20 Gallons 28.4 Liters 75.7 Liters Plating speed ½ oz./hr. @ 0.5 volts ½ oz./hr. @ 0.5 volts Average Time to Plate PCB 60 Minutes 60 Minutes Electrolyte Shelf Life 5 Years 5 Years Power Supply 110-220 Volts, 50-60 Hz. 110-220 Volts, 50-60 Hz. Compatible with: FR4, FR2, G10, PTFE, Duroid, TMM Getek, Arlon Included with the system: -Quick Plate Plating Tank and Rinse Tank -Brightener -Power Supply -Clothing Protection Jumpsuit -Conductive Ink (50g) -Goggles and Gloves -Copper Anode Plates and Bags -Manuals -Plating Rack -Squeegee and Sand Paper Duroid and TMM are trademarks of Rogers Corp. Getek is a trademark of GE Corp. Arlon is a trademark of Arlon Corp. Due to continuous improvements, specifications are subject to change without notice. The following terms are trademarks of the indicated companies: Windows, Microsoft Corp.: TMM, Duroid, Rogers Corp.; Getek, GE Corp.; Arlon, Arlon Corp.; Quick Plate, T-Tech, Inc. Copyright 1994-2009.

Multi-Layer Layup Kits

QC5000 4 LAYER/4 LAYUP KIT 08 each BM-FOIL-AL-10-A [10mil Aluminum Release Foil] 08 each BM-FOIL-CU-2-A [1oz. Copper Foil (9 X 12)] 04 each BM-FR4-2DS2-A [0.031 FR4 1/1 12X9] 16 each BM-PREPR-1080-A [1080 Prepreg 9X12] 08 each BM-PREPR-7628-A [7628 Prepreg 9X12] 08 each BM-TEDLAR-10X13 [Release Film 11X14 for 9X12]

QC7000 4 LAYER/4 LAYUP KIT 08 each BM-FOIL-AL-10 [10mil Aluminum Release Foil] 08 each BM-FOIL-CU-2 [1oz. Copper Foil (12 X 18)] 04 each BM-FR4-2DS2 [0.031 FR4 1/1 12X18] 16 each BM-PREPR-1080 [1080 Prepreg 12X18] 08 each BM-PREPR-7628 [7628 Prepreg 12X18] 08 each BM-TEDLAR-13X19 [Release Film 13X19 for 12X18]

QC5000 6 LAYER, 4 LAYUP KIT 12 each BM-FOIL-AL-10-A [10mil Aluminum Release Foil] 12 each BM-FOIL-CU-2-A [1oz. Copper Foil (9 X 12)] 06 each BM-FR4-2DS2-A [0.031 FR4 1/1 12X9] 24 each BM-PREPR-1080-A [1080 Prepreg 9X12] 12 each BM-PREPR-7628-A [7628 Prepreg 9X12] 12 each BM-TEDLAR-10X13 [Release Film 11X14 for 9X12]

QC5000 8 LAYER/LAYUP KIT 16 each BM-FOIL-AL-10-A [10mil Aluminum Release Foil] 16 each BM-FOIL-CU-2-A [1oz. Copper Foil (9 X 12)] 08 each BM-FR4-2DS2-A [0.031 FR4 1/1 12X9] 32 each BM-PREPR-1080-A [1080 Prepreg 9X12] 16 each BM-PREPR-7628-A [7628 Prepreg 9X12] 16 each BM-TEDLAR-10X13 [Release Film 11X14 for 9X12]


Reflow and Laboratory Ovens

Reflow SMT

Reflow SMT

Lab Oven

Convection

Surface Mount Reflow Oven -A

QP-OVEN-A

This light weight, compact, stand-alone laboratory reflow oven can be used for reflowing or preheating of

many different SMT components. Its reflowing process is automatically controlled by an internal

microprocessor. Real time temperature is displayed on the LCD. The oven utilizes IR heating, is equipped

with air cooling. The oven can be used for creating 2-sided boards.

Specifications:

Effective working area: 228x177mm (9"x7")

Unit dimension: 300x250x160mm (12"x10"x6")

Temperature: to 250°C

Power: 600W, 110V, US plug

Reflow cycle: 4~8 minutes

Surface Mount Reflow Oven B

QP–OVEN-B

Features/ Specification:

Working voltage: AC110V

Working frequency:60Hz

Maximum output power: 1650W

Heating methods: infrared radiation and hot air mix heating

Operating system: Chinese-English operating system

Working mode: automatic soldering mode, maintenance mode adjustable

Temperature curve paragraph: warm-up, heating, soldering, heat preservation and cooling segment.

Range of temperature and time on warm-up: 70~150℃, 0~5Min

Range of temperature and time on heating: warm-up temperature to 250℃, 0~5Min

Range of temperature and time on soldering: heating temperature to 300℃, 0~30s

Range of temperature and time on heating preservation: soldering temperature －(0~50℃)

Effective soldering area: 305×320mm

Unit Size: 460×372×275mm

Even temperature distribution.

• CPU closed loop temperature control, digital display, zero Voltage heater switching.

• Dedicated power and heating switches.

• ESD safe.

• External temperature calibration.

• Hinged hood creates an oven like environment for reflow.

• Two heating states optional (Pre-heating ＆ reflow)

http://www.biggerbids.com/auction-image-gallery.php?auction_id=234766&image_id=1781379

http://www.biggerbids.com/auction-image-gallery.php?auction_id=234766&image_id=1781377

Laboratory Oven C

Specifications: •Min Temperature 5 °C / 41 °F •Max Temperature 225 °C / 437 °F •Volume 1.27 cu. ft. / 36 L •Chamber Dimensions (W x H x D) 13 x 13 x 13" / 33 x 33 x 33 cm •Power 115 V / 6.95 A / 800 W •Type of Thermostat Hydraulic •Operating Temperature Range Ambient +5° to 225°C / Ambient +9° to 437°C •Shelves Included/Maximum (1" Centers) 3 (1 Fixed, 2 Adjustable)/13 •Maximum weight per shelf 35 lbs. •Overall Dimensions (W x H x D) 15 x 21 x 15" / 38 x 54 x 38 cm •Shipping Weight 59 lb. / 27.7 k Order T-Tech Part Number: QP-LAB-OVEN-C

This gravity convection oven is designed to meet the laboratory needs of industry, research organizations and schools. Well-crafted and versatile, it can be used for drying, baking, sterilizing, evaporating, heat treating, annealing and testing. The Durable exterior has a hard, scratch-resistant hammer finish. Doors open with high impact thermoplastic handles. Engineered with a Heavy steel double-wall cabinet. Work space is insulated from the outer cabinet with one inch of high density mineral wool, and interiors are made of corrosive-resistant aluminized steel. Crafted with UL and CSA recognized components. The control panel is equipped with an illuminated ON-OFF rocker switch and a heat/cycle pilot light Temperature is controlled by an automatic Hydraulic thermostat. Energy efficient, low-watt density sheathed elements are engineered into a compact design for quick run-up and recovery times. Temperature uniformity is greatly improved by a perforated heat shield which absorbs radiant heat and distributes it evenly.


Quick Circuit Enclosures and Stands

QCJ5 Series

Stand/Storage

Quick Circuit

Stand/Storage

QC3000

QC5000

QC7000

QC9000

QC12000

Quick Circuit

Enclosure Stand

QC3000

Quick Circuit

Sound Enclosure

QC3000

QC5000

QC7000

QC9000

QC12000

QCJ5 Stand and Storage

NEW! - The QCJ5 Stand is specifically designed to provide the perfect work space for

your QCJ5 system. It also doubles as a storage space for T-Tech’s compact and

ultra-quite air compressor, the Dual HEPA vacuum and your tools and materials.

Model: OA-STAND-QCJ5


Quick Circuit Stand and Storage

NEW! - The Quick Circuit Stand is specifically designed to provide the perfect work

space for your Quick Circuit prototyping system. It also doubles as a storage space

for T-Tech’s compact and ultra-quite air compressor, the HEPA vacuum and your

tools and materials.

Model: OA-SE-STAND


Quick Circuit Model 3000

Enclosure Stand and Storage Combination

NEW! - The Quick Circuit QC3000 Enclosure Stand and Storage unit is specifically

designed to provide the perfect work space for your Quick Circuit Model QC3000

prototyping system. It also doubles as a storage space for T-Tech’s HEPA vacuum

and your tools and materials.

Model: Model: OA-SE-3000


Quick Circuit Sound Enclosures

Tech Sound Enclosures encapsulate the Quick Circuit prototyping system with

sound dampening acoustical foam, allowing you to comfortably create your

prototype circuits in an office environment.

T-Tech sound enclosures are tested with a dB meter and measure less than 60 dB

at a distance of three feet from the Quick Circuit system while the Quick Circuit

system is in use.

Available for Quick Circuit Models:

Model Part Number

QC5000 OA-SE-5000

QC7000 OA-SE-9000

QC9000 OA-SE-9000

QC12000 OA-SE-12000

Our optional Quick Circuit stand is designed to hold all your Quick Circuit Parts,

Tools and Accessories such as: HEPA Vacuum, Shear, Controller and more.


HEPA Vacuums & Filters

Dual Hepa

Vacuum

115V/ 230V

Single Hepa

Vacuum

115V / 230V

T-Tech Hepa

Vacuum Bags

T-Tech HEPA

Replacement

Filters

OA-VAC-DUAL-115 / OA-VAC-DUAL-230

SPECIFICATIONS DESCRIPTION: T-TECH DUAL HEPA 115/230 VOLT VACUUM DIMENSIONS: 20” X 12” X 14” (50cm x 30cm x 35cm) MULTI FILTER: 1st stage vacuum bag - multi-layered, disposable, expands to 11” x 12” x 3” (396 cubic in.) 2nd stage HEPA Filter – smallest particle filtration (0.3submicron) System SOUND LEVEL: 62dBA SEALED VAC. INCH: 91.2 AIR WATTS: 245 AIR FLOW CFM: 95 Volts: 120 or 240 Watts: 850

REPLACEMENT BAGS / FILTERS

T-Tech HEPA Vacuum Bags Filter bags for T-Tech vacuum.. Model: OA-VAC-HEPA-BAG-T

5 bags per package

T-Tech HEPA Filter HEPA filter for T-Tech vacuums

Model: OA-VAC-HEPA-FIL-T

OA-VAC-SINGLE-115 / OA-VAC-SINGLE-230

SPECIFICATIONS DESCRIPTION: T-TECH HEPA 115/230 VOLT VACUUM DIMENSIONS: 10” X 12” X 14” (25cm x 30cm x 35cm) MULTI FILTER: 1st stage vacuum bag - multi-layered, disposable, expands to 11” x 12” x 3” (396 cubic in.) 2nd stage HEPA Filter – smallest particle filtration (0.3submicron) System SOUND LEVEL: 62dBA SEALED VAC. INCH: 91.2 AIR WATTS: 245 AIR FLOW CFM: 95 Volts: 120 or 240 Watts: 850

REPLACEMENT BAGS / FILTERS

T-Tech HEPA Vacuum Bags Filter bags for T-Tech vacuum.. Model: OA-VAC-HEPA-BAG-T

5 bags per package

T-Tech HEPA Filter HEPA filter for T-Tech vacuums

Model: OA-VAC-HEPA-FIL-T


Air Compressor

Air Compressor

Ultra-Quiet

Suitable for all Quick

Circuits requiring

compressed air

QC-Compressor ultra-quiet compressor

This incredibly quiet and affordable oil free air compressor is an ideal solution for Quick Circuit customers who require localized compressed air. The Ultra-Quiet 1 HP motor generates ample pressure and C.F.M. to operate all Quick circuit models, including the popular QCJ5 automated prototyping system. Compressor is equipped with external dryer/filter.

Air Compressor: Oil Free Motor: 1 HP Ultra Quiet Power: 850W Psi: 115 Tank: 10 Gallons / 38 Liters Maximum pressure(Mpa): 0.8 Starting pressure (Mpa): 0.5 Noise(dB): 50 Speed (r/min): 1680 Capacity: 43.5 (Gallons/Min), 165 (Liters/min): C.F.M.: 5.8 Bar: 8

Weight: 77.0 Lbs / 35KG Dimensions: 15.75in x 15.57in x 26.0in / 40cm x 40cm x 66cm

External Dryer: Impurities Filtration 5 Micron, Oil Filtration 5PPM, Maximum temperature 149F / 65C, General differential pressure 0.2KG/CM2, Maximum pressure difference 0.7KG/CM2


Quick Circuit Tools and Materials

Board Material

Material Kits

Drill Bits

Endmills

Contour Routers

T-Milling Tools

Tool Kits

1.80

0.37

0.15

30 |

ww

w.t

-tec

h.c

om

bo

ard

mat

eria

l

FR431 mil thickness (.031)

59 mil thickness (.059)

size (in.) copper (oz.) part #12 x 18 .5 | .5 BM-FR4-1DS2 9 x 12 .5 | .5 BM-FR4-1DS2-A12 x 18 .5 | 0 BM-FR4-1SS212 x 18 1 | 1 BM-FR4-2DS2 9 x 12 1 | 1 BM-FR4-2DS2-A12 x 18 1 | 0 BM-FR4-2SS2

31 mil thickness (.031) solder plated

size (in.) copper (oz.) part #12 x 18 .5 | .5 BM-SP-1DS212 x 18 .5 | 0 BM-SP-1SS212 x 18 1 | 1 BM-SP-2DS2 9 x 12 1 | 1 BM-SP-2DS2-A12 x 18 1 | 0 BM-SP-2SS2

size (in.) copper (oz.) part #12 x 18 .5 | .5 BM-FR4-1DS 9 x 12 .5 | .5 BM-FR4-1DS-A12 x 18 .5 | 0 BM-FR4-1SS 9 x 12 .5 | 0 BM-FR4-1SS-A12 x 18 1 | 1 BM-FR4-2DS 9 x 12 1 | 1 BM-FR4-2DS-A12 x 18 1 | 0 BM-FR4-2SS 9 x 12 1 | 0 BM-FR4-2SS-A12 x 18 2 | 2 BM-FR4-3DS 9 x 12 2 | 2 BM-FR4-3DS-A12 x 18 2 | 0 BM-FR4-3SS 9 x 12 2 | 0 BM-FR4-3SS-A

1.80

0.37

0.15

30 |

ww

w.t

-tec

h.c

om

59 mil thickness (.059) solder plated

size (in) copper (oz.) part #12 x 18 .5 | .5 BM-SP-1DS 9 x 12 .5 | .5 BM-SP-1DS-A12 x 18 .5 | 0 BM-SP-1SS 9 x 12 .5 | 0 BM-SP-1SS-A12 x 18 1 | 1 BM-SP-2DS 9 x 12 1 | 1 BM-SP-2DS-A12 x 18 1 | 0 BM-SP-2SS 9 x 12 1 | 0 BM-SP-2SS-A12 x 18 2 | 2 BM-SP-3DS 9 x 12 2 | 2 BM-SP-3DS-A12 x 18 2 | 0 BM-SP-3SS

bo

ard

mat

eria

l

FR4

size (in.) Copper (oz.) Part #12 x 18 1 | 1 BM-FR4-2DS412 x 18 1 | 1 BM-FR4-2DS312 x 18 3 | 3 BM-FR4-4DS

Other Sizes

size (in.) type part #12 x 18 regular BM-ENTRY 9 x 12 regular BM-ENTRY-212 x 18 adhesive BM-ENTRY-AD 9 x 12 adhesive BM-ENTRY-AD-2

Entry Material

size (in.) type part #12 x 18 regular BM-BACKUP 9 x 12 regular BM-BACKUP-212 x 18 adhesive BM-BACKUP-AD 9 x 12 adhesive BM-BACKUP-AD-2

Backup Material

1.80

0.37

0.15

30 |

ww

w.t

-tec

h.c

om

dri

ll b

its

size in. mm. part #8.3 mil .0083 .2032 DB-008310 mil .0100 .2540 DB-010013 mil .0130 .3302 DB-013013.5 mil .0135 .3429 DB-013513.8 mil .0138 .3500 DB-013814.5 mil .0145 .3683 DB-014515.6 mil .0156 .3962 DB-015615.8 mil .0158 .4000 DB-015816 mil .0160 .4064 DB-016017.7 mil .0177 .4500 DB-017718 mil .0180 .4572 DB-018019.7 mil .0190 .5000 DB-019720 mil .0200 .5080 DB-020021 mil .0210 .5334 DB-021021.7 mil .0217 .5511 DB-021722.5 mil .0225 .5715 DB-022523.6 mil .0236 .5994 DB-023624 mil .0240 .6096 DB-024025 mil .0250 .6350 DB-025025.6 mil .0256 .6502 DB-025626 mil .0260 .6604 DB-026027.6 mil .0276 .7010 DB-027628 mil .0280 .7500 DB-028029.2 mil .0292 .7416 DB-029229.5 mil .0295 .7493 DB-029531 mil .0310 .7874 DB-031031.5 mil .0315 .8000 DB-031532 mil .0320 .8128 DB-032033 mil .0330 .8382 DB-033033.5 mil .0335 .8500 DB-033535 mil .0350 .8890 DB-035035.4 mil .0354 .9000 DB-035436 mil .0360 .9144 DB-036037 mil .0370 .9398 DB-037037.4 mil .0374 .9500 DB-037438 mil .0380 .9652 DB-038039 mil .0390 .9906 DB-039039.4 mil .0394 1.000 DB-039440 mil .0400 1.016 DB-0400

:: drill bit kitAS-KIT-DRILL

2 of each.018.020.025.032.040

1.80

0.37

0.15

30 |

ww

w.t

-tec

h.c

om

size in. mm. part #41 mil .0410 1.041 DB-041041.3 mil .0413 1.049 DB-041342 mil .0420 1.067 DB-042043 mil .0430 1.092 DB-043043.3 mil .0433 1.100 DB-043345.3 mil .0453 1.150 DB-045346.5 mil .0465 1.180 DB-046546.9 mil .0469 1.190 DB-046947.2 mil .0472 1.200 DB-047249.2 mil .0492 1.250 DB-049251.2 mil .0512 1.300 DB-051252 mil .0520 1.320 DB-052053.1mil .0531 1.349 DB-053155 mil .0550 1.397 DB-055055.1 mil .0551 1.399 DB-055157.1 mil .0571 1.450 DB-057159.1 mil .0591 1.500 DB-059159.5mil .0595 1.511 DB-059561 mil .0610 1.550 DB-061062.5 mil .0625 1.587 DB-062563 mil .0630 1.600 DB-063063.5 mil .0635 1.613 DB-063565 mil .0650 1.650 DB-065066.9 mil .0669 1.699 DB-066967 mil .0670 1.702 DB-067068.9 mil .0689 1.750 DB-068970 mil .0700 1.778 DB-070070.9 mil .0709 1.800 DB-070972.8 mil .0728 1.849 DB-072873 mil .0730 1.854 DB-073074.8 mil .0748 1.899 DB-074876 mil .0760 1.930 DB-076076.8 mil .0768 1.950 DB-076878.1 mil .0781 1.983 DB-078178.5 mil .0785 1.993 DB-078578.7 mil .0787 1.998 DB-078780.7 mil .0807 2.050 DB-080781 mil .0810 2.057 DB-081082 mil .0820 2.082 DB-0820


2 of each.018.020.025.032.040

dri

ll b

its

1.80

0.37

0.15

30 |

ww

w.t

-tec

h.c

om

size in. mm. part #82.7 mil .0827 2.802 DB-082784.6 mil .0846 2.150 DB-084686 mil .0860 2.184 DB-086086.6 mil .0866 2.200 DB-086689 mil .0890 2.260 DB-089090.6 mil .0906 2.300 DB-090692.5 mil .0925 2.349 DB-092593.5 mil .0935 2.374 DB-093593.8 mil .0938 2.328 DB-093894.5 mil .0945 2.400 DB-094596 mil .0960 2.438 DB-096096.5 mil .0965 2.451 DB-096598 mil .0980 2.489 DB-098098.4 mil .0984 2.499 DB-098499.5 mil .0995 2.527 DB-0995100.4 mil .1004 2.550 DB-1004101.5 mil .1015 2.578 DB-1015102.4 mil .1024 2.600 DB-1024104 mil .1040 2.550 DB-1040104.3 mil .1043 2.650 DB-1043106.3 mil .1063 2.700 DB-1063106.5 mil .1065 2.705 DB-1065108.3 mil .1083 2.750 DB-1083109.4 mil .1094 2.790 DB-1094110 mil .1100 2.794 DB-1100110.2 mil .1102 2.799 DB-1102111 mil .1110 2.819 DB-1110112.2 mil .1122 2.849 DB-1122113 mil .1130 2.870 DB-1130114.2 mil .1142 2.900 DB-1142116 mil .1160 2.946 DB-1160116.1 mil .1161 2.948 DB-1161118.1 mil .1181 2.990 DB-1181120 mil .1200 3.050 DB-1200120.1 mil .1201 3.050 DB-1201122 mil .1220 3.098 DB-1220124 mil .1240 3.140 DB-1240125 mil .1250 3.175 DB-1250126 mil .1260 3.200 DB-1260141.7 mil .1417 3.590 DB-1417


2 of each.018.020.025.032.040

dri

ll b

its

1.80

0.37

0.15

30 |

ww

w.t

-tec

h.c

om

end

mill

sitem in. mm. part #4 mil .0040 .1016 EM-0040-2S5 mil .0050 .1270 EM-0050-2S6 mil .0060 .1524 EM-0060-2S7mil .0070 .1778 EM-0070-2S8 mil .0080 .2032 EM-0080-2S9 mil .0090 .2286 EM-0090-2S9.8 mil .0980 .2489 EM-0098-2S-MM10 mil .0100 .2540 EM-0100-2S11 mil .0110 .2794 EM-0110-2S12 mil .0120 .3408 EM-0120-2S15 mil .0150 .3810 EM-0150-2S19.7 mil .0197 .5003 EM-0197-2S-MM20 mil .0200 .5080 EM-0200-2S25 mil .0250 .6350 EM-0250-2S29.5 mil .0295 .7493 EM-0295-2S-MM31 mil* .0310 .7874 EM-0310-2R31 mil .0310 .7923 EM-0310-2S39.4 mil* .0394 1.000 EM-0394-2R-MM39.4 mil .0394 1.000 EM-0394-2S-MM40 mil .0400 1.016 EM-0400-2S50 mil* .0500 1.270 EM-0500-2R50 mil .0500 1.270 EM-0500-2S62.5 mil* .0625 1.587 EM-0625-2R80 mil .0800 2.032 EM-0800-2S125 mil* .1250 3.175 EM-1250-2R

* Denotes regular flute length versus stub

:: endmill kitAS-KIT-ENDMILL

2 of each.008, .010, .015, .020, .031

1.80

0.37

0.15

30 |

ww

w.t

-tec

h.c

om

rou

ters

item mm. part #31 mil Chipbreaker Contour Router .7874 CR-0310-R262 mil Chipbreaker Contour Router 1.574 CR-0620-R2

31 mil Fiberglass Contour Router .7874 CR-0310-R162mil Fiberglass Contour Router 1.574 CR-0620-R1

31 mil Fishtail Contour Router .7874 CR-0310-F262 mil Fishtail Contour Router 1.574 CR-0620-F2

item path size (mil) part #T1 8-12 MILL-T1T2 10-12 MILL-T2T3 8-14 MILL-T3T4 4-6 MILL-T4T5 6-10 MILL-T8 t

| to

ols

:: t|tool kit

AS-KIT-MILL2 of each

T1, T2, T3, T4, T5

:: router kitAS-KIT-ROUT

3 of each62 mil fiberglass, 62 mil chipbreaker

2 of each31 mil fiberglass, 31 mil chipbreaker

1.80

0.37

0.15

30 |

ww

w.t

-tec

h.c

om

kits

item part #QC 5000 MATERIALS KIT AS-KIT-5000MQC 7000 MATERIALS KIT AS-KIT-7000MQC 9000 MATERIALS KIT AS-KIT-9000MDRILL BIT KIT AS-KIT-DRILLEND MILL KIT AS-KIT-EMILLROUTER KIT AS-KIT-ROUTERT|Tool Kit AS-KIT-MILLRF MICROWAVE TOOL KIT AS-KIT-RF/MWSTANDARD PACKAGE OF MATERIALS

AS-KIT-STD

.8 MM THRU HOLE KIT TH-KIT-08MM1.0 MM THRU HOLE KIT TH-KIT-10MM1.2 MM THRU HOLE KIT TH-KIT-12MM

item part #IsoPro 2.6 | 1 Seat OA-ISO-PROIsoPro Upgrade OA-ISOPRO-UPIsoPro 2.6 DXF OA-ISOPRO-DXFIsoPro additional seats OA-ISOPRO-2IsoPro 2.6 Network version OA-ISOPRO-NET-XDXF to Gerber conversion OA-D2G

soft

war

e::USB retro kit

USB-RETRO

Upgrade your current controller to be USB compatible and get IsoPro 2.6.

1.80

0.37

0.15

30 |

ww

w.t

-tec

h.c

om

Qu

ick

Pla

te

item part #Quick Plate 18x12 QP-1812Quick Plate 9x12 QP-9125 gal. of mixed electroloyte QP-ELECTROLYTE-510 gal. of mixed electrolyte QP-ELECTROLYTE-1020 gal. of mixed electrolyte QP-ELECTROLYTE-20Quick Plate Conductive Ink (25g) QP-INK-25Quick Plate Conductive Ink (50g) QP-INK-50Copper Brightener QP-BRIGHT-250MLCopper Brightener QP-BRIGHT-500MLReplacement Anode Assembly QP-ANODERPL1812Replacement Anode Assembly QP-ANODERPL912

Th

ru H

ole

item part #32-Pin Socket Sip TH-SIP-32Via Pins: OD = 0.8mm ( .032”) TH-VIA-032PVia Insertion Hand Tool 0.8mm (.032”) TH-VIA-HT032Eyelets .030”OD/.020”ID (SOLDER PLATED) TH-EYE-030Eyelets .039”OD/.030”ID (SOLDER PLATED) TH-EYE-039Eyelets .047”OD/.037”ID (SOLDER PLATED) TH-EYE-047Eyelet Hand Tool .030”OD (0.75mm) TH-EYE-HT-030Eyelet Hand Tool .039”OD (1.00mm) TH-EYE-HT-039Eyelet Hand Tool .047”OD (1.20mm) TH-EYE-HT-047

1.80

0.37

0.15

30 |

ww

w.t

-tec

h.c

om

vacu

um

item part #Hepa Vacuum 115v HepaVac115Hepa Vacuum 230v HepaVac230Replacement bags HepaVac BagReplacement filter HepaVac Filter

EuroClean Filter OA-VAC-HEPA-FILEuroClean Bags OA-VAC-HEPA-BAGNilfisk GS 80 HEPA filter OA-VAC-HEPANilfisk GS 80 Micro filter OA-VAC-MCFNilfisk GS 80 Main filter OA-VAC-FILTERNilfisk GS 80 Bags OA-VAC-BAG

new

sys

tem

old

sys

tem

s

Documents

Providing Precision Prototyping Systems Worldwide · PDF fileProviding Precision Prototyping Systems Worldwide for Over 30 Years Page 2 Quick Circuit - PCB prototyping systems Page