Prototype Catalog 2015 - Bensha Product Catalog... · benshaw.com Field Services: • Installations and commissioning • On-site repairs – Scheduled / emergency • • On-site

A Regal Brand

2015 Fall Product CatalogADVANCED CONTROLS & DRIVES

benshaw.com

Field Services:• Installations and commissioning

• On-site repairs

– Scheduled / emergency

• On-site retrofits and upgrades

Factory Services:• Send-in repair

– Scheduled / emergency

• Send-in retrofits and upgrades

• Quick ship modified — Benshaw Express stock

• Benshaw and 3rd party

Technical Training:• In-class in our training center

• In-class at your facility

• Customized for your business

Maintenance Services:• Thermography

• Service contracts

• Preventive

– Maintenance / agreements

• Power quality

Spare Parts:• 24 / 7 / 365 availability

• Emergency delivery

– Courier available

• Replace or repair

Technology Retrofits:• Solid state motor controls and drives

• Electromechanical motor controls

24/7/365

Service and Support

Return to the Table of Contents

Medium Voltage Variable Frequency Drives...................................................... Section 1

Low Voltage Variable Frequency Drives...................................................... Section 2

Medium Voltage Starters......................................................Section 3

Low Voltage Starters......................................................Section 4

Wye Delta Starters ...................................................... Section 5

Pump Control Starters...................................................... Section 6


benshaw.combenshaaaaaawwwwwwwww.w.w.w.w.w.w.wwwwwwwwwwwwww.w.ww cococococcocoommmbbbb hhbenshaw.com Return to the Table of Contents

1-1

Medium Voltage Variable Frequency Drives

Engineered Medium Voltage Drive Products

M2L 3000 Series .................................1-2

1-1Return to the Table of Contents

1-2 benshaw.com1-2 bebebeeebebebebbbb nsnsnsnsnsnsnssssnssssnsnn hhhhhhhhhhhhhhhhhhhhhhhahhahahahahahahahahahahahah w.w.w.w.ww.w.w.w.w.wwww.w.ww.wwwwwww.wwwww.w..w.w...w.cococococccccccccc mmmmmmmmmmmmmm

M2L 3000 Series

Product Highlights:

With over 30 years of medium voltage motor controls experience, Benshaw is now introducing a new family of medium voltage drives. Our medium voltage drive features a unique technology that allows Benshaw to offer a simple, compact and reliable drive solution. Our innovative topology, coupled with an advanced control architecture, will enable customers to transform the way they do business.

The M2L 3000 Medium Voltage Variable Frequency Drive is a step change in motor control power technology. Though designed for industrial applications, it benefits from Benshaw’s wide-ranging experience in defense and nuclear-related technologies, an arena where products must meet the most rigorous standards and where failure is simply not an option.

Our innovative patented topology — modular multilevel converter (M2LC) — is powered by state-of-the-art hardware and software controls. Our control algorithms are setting the stage for the next generation of VFDs.

Key Features:• Compact Modular Design

– Simplistic component arrangement with minimal total part count

• Installation Flexibility

– Optimal for retrofits

• Arc Resistant

– Safety by design—arc flash footprint inherently lower

• Energy Efficiency

– Inverter efficiency 99.5%

• Robust Control Architecture

– High performance, reliability and immunity from EMI through noise-tolerant signaling and fiber optic communications

2.3–11 kV Class, 300–90,000 HP


Variable Frequency Drives

Developed, designed and manufactured in the USA. Supported around the globe.

benshaw.com1-2 Return to the Table of Contents

1-3

Variable Frequency DrivesM2L 3000 Series

M2L TopologyPower is fed to the M2L inverter from a standard, easily sourced isolation transformer, which can be placed in a remote or outdoor location. All M2L drive systems are compliant with IEEE519-1992 input harmonic current requirements through the use of an 18-pulse input transformer (standard).

M2L Topology

+ BUS

- BUS

CELL A6

CELL A4

CELL A2

CELL B2

CELL B4

CELL B6

CELL C6

CELL C4

CELL C2

CELL C5

CELL C3

CELL C1

CELL B1

CELL B3

CELL B5

CELL A5

CELL A3

CELL A1

T1

T2

T3

L1

L2

L3

0

20

-20

GND

AC MOTOR


1-4 benshaw.com

Each cell in the inverter contains two fourth-generation IGBT switching modules and uses only high-reliability dry-type film capacitors. Embedded circuitry in each cell provides intelligence for control and communication.

CELL CON

TROL &

PO

WER SU

PPLY BOA

RD


Variable Frequency DrivesM2L 3000 Series

M2L TopologyEnergy storage is distributed among identical power modules that comprise the M2LC inverter, which greatly reduces arc flash potential and substantially improves reliability.

Cell detail


1-5

M2L 3000 Series

Advanced Features and ConfigurationsBenshaw provides an integrated synchronous transfer scheme using the M2L drive and an intelligent PLC control center. Synchronous, or “bi-directional bumpless,” transfer allows a single inverter to start up to six individual motors and smoothly transfer them to across-the-line operation.

Single-line diagram of a typical four-motor synchronous transfer scheme

M2L SERIES INVERTER

M2L SERIESCONVERTER

MV

FUSE

DISCONNECT

3 CONDUCTORS (MIN)

DECOUPLINGREACTOR

3 CONDUCTORS (MIN)

2 CONDUCTORS (MIN)

CONTACTORVFD INPUT DISCONNECT

(OPTIONAL)

VFD INPUT

VFD OUTPUT

INDUCTION

MV

FUSE

CONTACTORISOLATIONLINE

CONTACTORISOLATIONVFD

DISCONNECT

DISCONNECT(OPTIONAL)

MOTOR #1

LINE

INDUCTION

MV

FUSE



DISCONNECT


MOTOR #2

LINE

INDUCTION

MV

FUSE



DISCONNECT


MOTOR #3

LINE

INDUCTION

MV

FUSE



DISCONNECT


MOTOR #4

LINE

INCOMINGPOWER



1-6 benshaw.com

Contact your regional sales manager for more information and to obtain a quote.

Example of two parallel inverter sections

XFMR/RECTIFIER (CONVERTER)

ASSEMBLY

INCOMING POWER

INVERTERSECTION

MASTER

AC REACTOR

INVERTERSECTION

FOLLOWER

DC LINKREACTOR

AC REACTOR

ROUTER

HMI

SINGLE MACHINE INTERFACE

STD-EE

DC LINKREACTOR

INDUCTIONMOTOR

PROCESSCONTROL

INTERFACE

STD-EE STD-EE: STANDARD ELECTRICAL ETHERNET

TC-OF: TIME CRITICAL OPTICAL FIBER

LAPTOP(BENSHAW CONNECT)

TC-OF

STD-EE

STD-EE

M2L 3000 Series

Advanced Features and ConfigurationsHigh speed communication architecture enables the connection of up to eight inverter sections in parallel, providing clean, multi-level PWM output for motors up to 90,000 HP.




2-1

Low Voltage Variable Frequency Drives

Standard Low Voltage Drive Products

General Purpose Micro Drives ...........2-2

Sensorless Vector Drives ....................2-5

NEMA 4X Washdown / NEMA 12 Sensorless Vector Drives ..................2-10

Built-to-Order Packaged Drives .......2-14

Standard Low Voltage Drive Options

Input Line Reactors ..........................2-19

Output Reactors ...............................2-25

Long Lead Filters ............................. 2-27

Dynamic Brake Resistors and Brake Modules ..........................2-30

Engineered Low Voltage Drive Products

VFD Pre-Order Check List ................2-32

Sensorless Vector Drives ..................2-35

Integrated Control Solutions ............2-52

Custom-Engineered Drive Solutions .................................2-54

Clean Power Drives ..........................2-55


2-2 benshaw.com

1–5 HP, 230 / 460 V / Protected Chassis / NEMA 1* Product Highlights:

The GX series is a compact, economical chassis drive designed for low horsepower applications.

The GX series has a powerful set of parameters with a simple, easy to use keypad. The programming structure provides quick, simple setup.

Although small in size, the GX series provides a large amount of digital I/O for custom applications.

Key Advantages:• Small, compact design

• Constant torque rated

• Sensorless vector control or V/Hz control

• Standard dynamic braking transistor (external resistor required)

• Flexible, programmable I/O

• Integral PID control

• Standard ModBus RTU terminals

• Windows based software

Standard Features:• Standard I/O: 8 digital inputs, 2 analog inputs, 1 analog output, 1 relay output,

1 open collector output

• Digital metering: Output current, output frequency, DC link voltage, motor RPM, output power, output voltage, output torque

• Protection: Over current, ground fault, over voltage, current limit, motor overload, output phase loss, over heat, loss of signal and more

• Communications: ModBus RTU (standard)

• Voltage tolerance: ±10%

• Control methods: Open loop V / Hz, sensorless vector control

• V / Hz patterns: Linear, squared, user programmable V / Hz

• Analog output functions: 1 analog output 0 – 10 VDC: Configurable to motor speed, output current, output voltage, DC link voltage

• Analog inputs: 1 at 0/4 – 20 mA, 1 at 0 – 10 VDC

• Relay output and open collector output: 1 Form C relay output and 1 open collector output, programmable to running, faulted, stopped, ready, at speed, high or low frequency levels, loss of signal and more

• Digital inputs: 8 digital inputs configurable to forward run, reverse run, 3 wire start / stop, reset, jog, preset speeds, motorized pot function, external trip, alternate ramp selections, HOA and more

• User interface: 4 digit LED display

• Stop methods: Coast, decel, DC injection braking and optional dynamic braking

GX Series

RATINGS

Constant Torque:

1–5 HP @ 460 V 1–5 HP @ 230 V*Chassis VFD converts to NEMA 1 with conduit kit


General Purpose Micro Drives


2-3

GX SeriesControl Terminal Layout LED

display

Save parameters

Status indicators

Run / stop buttons

Left / right up / down keys

Modbus terminal

Programmable I/O

pa

Leftd

T/M Description

MO Multi-Function Open Collector Output

MG MO Common

24 24 V Power Supply (100 mA Max.)

P1Multi-Function Input Terminal (Factory Setting)

Fx: Forward Run

P2 Rx: Reverse Run

CM Input Signal Common

P3

Multi-Function Input Terminal (Factory Setting)

Bx: Emergency Stop

P4 Rst: Trip Reset

P5 Jog: Jog Operation

CM Input Signal Common

P6

Multi-Function Input Terminal (Factory Setting)

Multi-Step Freq. — Low

P7 Multi-Step Freq. — Middle

P8 Multi-Step Freq. — High

VR 10 V Power Supply For Potentiometer

V1 Freq. Setting Voltage Signal Input: -0 – 10 V

I Freq. Setting Current Signal Input: 0 – 20 MA

AM Multi-Function Analog Output Signal: 0 – 10 V

3A

Multi-Function Relay Output Terminal

Normally Open Contact

3B Normally Closed Contact

3C Common

S+RS485 Communication Terminal

S–



2-4 benshaw.com

GX SeriesProtected Chassis, 1–5 HP, 230 / 460 V

230 V

Model Number

Constant Torque Dimensions (in.)

Weight (lbs.) List PriceHP Amps H W D

RSI-001-GX-2B • 1 4.2 5 2.8 5.1 2 $500.00

RSI-002-GX-2B • 2 6.8 5 3.9 5.1 3 $600.00

RSI-003-GX-2B • 3 9.6 5 5.5 6.1 4 $700.00

RSI-005-GX-2B • 5 15.2 5 5.5 6.1 5 $800.00

460 V

Model Number

Constant Torque Dimensions (in.)

Weight (lbs.) List PriceHP Amps H W D

RSI-001-GX-4B • 1 2.1 5 2.8 5.1 2 $600.00

RSI-002-GX-4B • 2 3.4 5 3.9 5.1 3 $700.00

RSI-003-GX-4B • 3 4.8 5 5.5 6.1 4 $750.00

RSI-005-GX-4B • 5 7.6 5 5.5 6.1 5 $900.00

NEMA 1 Conduit KitsModel Number Description List Price

GX-NEMA1KIT-A Conduit Kit for 1 HP GX Drive $60.00

GX-NEMA1KIT-B Conduit Kit for 2 HP GX Drive $60.00

GX-NEMA1KIT-C Conduit Kit for 3 HP and 5 HP GX Drive $60.00

Remote KeypadModel Number Description List Price

VFD-2M-GX-KEYPAD Remote Mount Keypad and 2 Meter Cable $175.00

• Units are stocked as protected chassis. If NEMA 1 enclosed is required, add NEMA 1 conduit kit.

Conduit kits will need to be installed by customer.

Web stocked

Available for same day shipping.




2-5

Sensorless Vector DrivesSG Series

RATINGS

Variable Torque:

7.5–40 HP @ 230 V7.5–700 HP @ 460 V 7.5–400 HP @ 600 V

Standard Duty:

7.5–40 HP @ 230 V 7.5–600 HP @ 460 V 7.5–400 HP @ 600 V

Heavy Duty:

5–30 HP @ 230 V 5–500 HP @ 460 V 5–300 HP @ 600 V

Variable Torque / Standard Duty / Heavy DutyProduct Highlights:

The SG series is a compact, economical drive designed for the most demanding applications. The flexible power stack allows the user to apply it to heavy duty loads (150% for 60 secs), standard duty loads (120% for 60 secs), or variable torque loads (110% for 60 secs).

With over 250 programmable parameters, Benshaw’s SG series drives are configurable to meet the needs of almost any industrial application, yet remain simple and easy to use.

Key Advantages:• Standard and heavy duty ratings

• Integral PID Control

• Sensorless vector control or V/Hz control

• Integral multiple motor control for pumping applications

• Uploadable / downloadable keypad


• Economical, compact design

• Simple, easy to use LCD interface

• Standard ModBus RTU port

• Windows-based software

Standard Features:• Standard I/O: 8 digital inputs,

2 analog inputs, 2 analog outputs, 5 relay outputs

• Optional I/O: Isolated analog output board (adds 2 additional analog outputs, 0/4 – 20 mA)

• Digital metering: Output currents, ground current, output frequency, DC link voltage, motor RPM, output motor voltage, run time and more

• Protection: Over current, ground fault, over voltage, current limit, motor overload, phase loss, over heat, loss of signal and more

• Analog inputs: 1 at 0/4 – 20 mA, 1 at 0 – 10 VDC (or -10 to 10 VDC)

• Communications: Modbus RTU (standard); Optional Fieldbus includes DeviceNet, Profibus, BacNet, LonWorks, Modbus TCP

• Voltage tolerance: -15%, +10%

• Control methods: V/Hz, sensorless vector, slip compensation

• V/Hz patterns: Linear, squared, user programmable V/Hz

• Analog outputs: 2 at 0 – 10 VDC (standard), 2 at 0/4 – 20 mA (with option board). Configurable to motor speed, output current, output voltage, DC link voltage, power, PID follower

• Relay outputs: 1 Form C fault relay output, 4 Form A relay outputs configurable to running, faulted, ready, at speed, high or low frequency levels, loss of signal, ready and more

• Digital inputs: 8 digital inputs configurable to forward run, reverse run, 3 wire start / stop, reset, jog, preset speeds, motorized pot function, external trip, alternate ramp selections, HOA and more

• User interface: 2 line LCD display, 16 characters per line

• Stop methods: Coast, decel, DC injection braking, Flux braking and optional dynamic braking


2-6 benshaw.com

SG SeriesBasic Wiring Diagram

DB UNIT

(option)

R

S

T

G

U

V

W

E/G

P1P2

Motor

U

V

W

E

ACRMC1MCCB1

M

RSi-SG

N

3 Phase

AC input

5G

NT

Motor thermal

detection

A0

B0 Pulse

input

5G

Sourcing

Mode PNP

Sinking

Mode NPN

CM

M8

M7

M6

M5

M4

M3

M2

M1

24G

24P

24V 4.9mA

Setting

Switch

24G

Default: Speed-L

Default: Speed-M

Default: RST

BX (E-STOP)

Default: JOG

Default: FX

Default: RX

Default: Speed-H

Pulse input method: (A+B), (A)

Input freq: 0Hz~100KHz

5G

I

V1S

V1 0[V]~+12[V]

-12[V]~+12[V]

0/4[mA]~20[mA]

Analog

input

S0

5G

S1

Analog meter

Max output

voltage:12V

Source max: 30mA

Sink max: 20mA

Default: Frequency

Default: Voltage

3A

3C

3B

24G

A1

C1

A2

C2

A3

C3

A4

C4

24G

C-

C+RS-485

24G

Terminatingresistor

Aux. relays

2424 VDC (50mA max)

Relay outputs

programmable

250Vac, 1A

Fault relay output

250Vac, 1A

Safety stop

(600V only)CN1


Sensorless Vector Drives


2-7

SG SeriesNEMA 1

230 V

Model Number

Variable Torque Standard Duty Heavy Duty Dimensions (in.) Weight (lbs.) List PriceHP Amps HP Amps HP Amps H W D

RSI-007-SG-2B 7.5 24 7.5 22 5 17 11.2 5.9 6.2 11 $1,400.00

RSI-010-SG-2B 10 32 10 29 7.5 23 11.2 7.9 7.2 14 $1,600.00

RSI-015-SG-2B 15 46 15 42 10 33 11.2 7.9 7.2 14 $1,750.00

RSI-020-SG-2B 20 60 20 55 15 44 17.9 9.8 7.9 28 $2,285.00

RSI-025-SG-2B 25 74 25 67 20 54 17.9 9.8 7.9 29 $2,985.00

RSI-030-SG-2B 30 88 30 80 25 68 23.6 12 9.2 44 $3,500.00

RSI-040-SG-2B 40 115 40 105 30 84 23.6 12 9.2 44 $4,125.00

460 V

Model Number


RSI-007-SG-4B 7.5 12 7.5 11 5 8 11.2 5.9 6.2 11 $1,425.00

RSI-010-SG-4B 10 16 10 14 7.5 11 11.2 7.9 7.2 14 $1,725.00

RSI-015-SG-4B 15 24 15 22 10 17 11.2 7.9 7.2 14 $1,885.00

RSI-020-SG-4B 20 30 20 27 15 22 17.9 9.8 7.9 28 $2,450.00

RSI-025-SG-4B 25 39 25 35 20 28 17.9 9.8 7.9 29 $2,800.00

RSI-030-SG-4B 30 45 30 41 25 34 23.6 12 9.2 44 $3,545.00

RSI-040-SG-4B 40 61 40 55 30 44 23.6 12 9.2 44 $4,250.00

RSI-050-SG-4B 50 75 50 68 40 55 25.3 12.1 10.5 60 $5,225.00

RSI-060-SG-4B 60 91 60 83 50 66 25.3 12.1 10.5 60 $6,500.00

RSI-075-SG-4B 75 110 75 100 60 80 25.3 12.1 11.2 64 $7,500.00

RSI-100-SG-4B 100 152 100 139 75 111 30.2 14.5 12.1 95 $9,000.00

RSI-125-SG-4B 125 183 125 167 100 134 30.2 14.5 12.1 95 $11,000.00

RSI-150-SG-4 • * 150 223 150 204 125 164 30.9 20.1 16.6 225 $13,000.00

RSI-200-SG-4 • * 200 264 200 242 150 194 30.9 20.1 16.6 225 $15,500.00

RSI-250-SG-4 • * 250 325 250 302 200 240 33.9 20.1 16.6 255 $18,000.00

RSI-350-SG-4 • * 350 432 300 396 250 317 42.5 27.2 17.3 450 $23,000.00

RSI-400-SG-4 • * 400 547 400 501 300 401 42.5 27.2 17.3 450 $32,000.00

RSI-500-SG-4 • 500 613 450 562 350 450 44.9 30.8 17.4 540 $40,000.00

RSI-600-SG-4 • 600 731 500 670 400 536 51.3 36.3 19.5 840 $48,000.00

RSI-700-SG-4 • 700 877 600 804 500 643 51.3 36.3 19.5 840 $57,750.00

Variable Torque = 110% current for 1 minute / Standard Duty = 120% current for 1 minute / Heavy Duty = 150% current for 1 minute

Units ending in a “B” designate NEMA 1. Units not ending in a “B” are protected chassis units.

• Protected chassis only (power terminal covers do not meet NEMA 1).

* DC Link Reactor (internal)

Web stocked




2-8 benshaw.com



600 V

Model Number


RSI-007-SG-6B 7.5 9 7.5 8.2 5 6.6 14 7.9 7.2 15 $1,650.00

RSI-010-SG-6B 10 12 10 11 7.5 9 14 7.9 7.2 16 $1,725.00

RSI-015-SG-6B 15 17 15 15.5 10 12 14 7.9 7.2 16 $1,885.00

RSI-020-SG-6B 20 23 20 21 15 17 17.9 9.8 7.9 28 $2,450.00

RSI-025-SG-6B 25 27 25 24.7 20 19.8 17.9 9.8 7.9 29 $2,800.00

RSI-030-SG-6B 30 34 30 31 25 25 23.6 12 9.2 44 $3,545.00

RSI-040-SG-6B 40 43 40 39 30 31.5 23.6 12 9.2 44 $4,250.00

RSI-050-SG-6B 50 55 50 50 40 43 25.3 11.8 11.5 71 $5,225.00

RSI-060-SG-6B 60 64 60 58.6 50 55 25.3 11.8 11.5 71 $6,750.00

RSI-075-SG-6B 75 80 75 73 60 64 25.3 11.8 11.5 71 $7,850.00

RSI-100-SG-6B 100 104 100 95 75 80 30.2 14.6 13.3 102 $9,125.00

RSI-125-SG-6B 125 128 125 117 100 104 30.2 14.6 13.3 102 $11,125.00

RSI-150-SG-6 • * 150 150 150 137 125 128 30.9 20 16.6 225 $13,100.00

RSI-200-SG-6 • * 200 200 200 184 150 147 33.9 20 16.6 255 $16,250.00

RSI-250-SG-6 • * 250 242 250 222 150 177 33.9 20 16.6 255 $21,000.00

RSI-350-SG-6 • * 350 333 300 305 250 244 42.5 27.2 17.7 450 $23,785.00

RSI-400-SG-6 • * 400 424 400 389 300 311 42.5 27.2 17.7 450 $32,845.00

Variable Torque = 110% current for 1 minute / Standard Duty = 120% current for 1 minute / Heavy Duty = 150% current for 1 minute

Units ending in a “B” designate NEMA 1. Units not ending in a “B” are protected chassis units.

• Protected chassis only (power terminal covers do not meet NEMA 1).

* DC Link Reactor

Web stocked

SG SeriesNEMA 1 / Protected Chassis


2-9

SG SeriesOptions

Dynamic Brake Transistor ModulesModel Number Description List Price

VFD-RSI-DBU-020-2 230V Dynamic Braking Transistor for 1 – 20 HP VFD, 10% Duty Cycle $1,100.00







VFD-RSI-DBU-100-4 460V Dynamic Braking Transistor for 100 HP VFD, 10% Duty Cycle $1,700.00

For HP greater than 100 HP or duty cycle greater than 10%, consult factory.

Fieldbus Communication CardsModel Number Description List Price

PC-400001-00 DeviceNet Communication Board Kit, SG VFD $575.00

PC-400002-00 Profibus Communication Board Kit, SG VFD $885.00

PC-400003-00 LonWorks Communication Board Kit, SG VFD $1,000.00

PC-400004-00 BacNet Communication Board Kit, SG VFD $1,325.00

PC-400005-00 Ethernet IP/Modbus TCP Communication Board Kit, SG VFD $1,100.00

Display / Keypad Remote MountingModel Number Description List Price

LCD-100000-00 Replacement Display / Keypad $200.00

VFD-2M-RE-CABLE-SG 2 Meter Keypad Cable $110.00



VFD-KEYPAD-SG-BEZEL Bezel, for SG Keypad, Remote Mounting $20.00

VFD-KEYPAD-SG-BLANK Keypad Blank, Installs in Drive when Keypad Is Remote $20.00

Analog Output CardModel Number Description List Price

VFD-RSI-SG-4-20-MA 4–20 mA Output Card, Adds (2) 4–20 mA Outputs $725.00



2-10 benshaw.com

S4 Series

RATINGS

Constant Torque:

1 HP @ 115 V1 to 20 HP @ 230 V1 to 200 HP@ 460 V / 600 V


NEMA 4X Washdown / NEMA 12 Sensorless Vector Drives

Standard Duty / Heavy DutyRSI S4 Series Product Highlights:

The S4 Series is a line of high performance NEMA 4X washdown variable frequency drives. Benshaw’s S4 variable frequency drives are built to withstand the harshest environments and hold up under your most demanding pressure washing applications. All S4 Series drives combine a simple user interface with an array of features and are suited to almost any indoor environment.

S4 variable frequency drives come standard with over 180 configurable parameters to match specific application and interface requirements. A standard dynamic braking transistor and resistor are also included for regenerative applications.

Key Advantages:• NEMA 4X washdown duty enclosure

• Sensorless vector control

• Standard braking transistor and resistor

• Infrared programming port

• Standard and Heavy Duty ratings

• LCD plain English display

• Simple, easy-to-use interface

• Standard ModBus communication port

• Integral Pl control

Standard Features:• NEMA 4X washdown enclosure

• Standard l/O: 10 digital inputs, 2 analog inputs, 2 analog outputs, 2 relay outputs

• Digital metering: Output current, output volts, power, MWh meter, run time, power on time, bus voltage, output frequency

• Communications: ModBus standard, optional other Fieldbus

• Voltage tolerance: ±10%

• Sensorless vector control

• V / Hz Pattern: Linear, quadratic

• Analog output functions: Output voltage, output current, drive load, drive temp, stator frequency, output power

• Analog inputs: 0–10VDC, 4–20mA, -10VDC to 10VDC, pulse train input

• Relay outputs: Running, forward, reverse, ready, faulted, at speed, keypad control, adjustable torque levels, adjustable current levels, PID limits, loss of reference, timers

• 10 digital inputs configurable: Run, preset speeds, jogging, PID disable, fault reset, drive enable, timers, motorized pot

• User interface: 20 character LCD display, infrared programming port

• Braking functions: Decal, coast, DC injection, dynamic braking

• Units 1–100HP are NEMA 4X; units 125–200HP are NEMA 12


2-11

S4 Series

Basic Wiring Diagram

+24 VDC

Forward Run

Reverse Run

Jog

Digital Input #1

Digital Input #2

Digital Input #3

Digital Input #4

Digital Input #5

External Fault

Relay #2

Relay #1

Digital Output #1

Digital Output #2

Pulse Train Output

Common

Common

4–20 mA output

Analog Common

0–10 VDC Output

Analog Common

4–20 mA input

0–10 VDC Input

0 – 10 VDC Input

Enable

+24 NC2

RC2

NO2

NC1

RC1

NO1

DO1

DO2

DOQ

dcom

dcom

Imet

acom

acom

Vmet

FWD

REV

R/J

DI1

DI2

DI3

DI4

DI5

MOL

EN

dcom

cin+

cin-

+10

Vin1

acom

Vin2



2-12 benshaw.com

S4 Series

NEMA 4X / 230 V

Model NumberStandard Duty Heavy Duty Dimensions (in.) Weight

(lbs.) List PriceHP Amps HP Amps H W D

RSI-001-S4-2W 1 4.2 0.5 2.5 9.5 6.5 6.1 9 $1,685.00

RSI-002-S4-2W 2 6.8 1 4.8 9.5 6.5 6.1 9 $1,700.00

RSI-003-S4-2W 3 9.6 2 7.8 9.5 6.5 8.5 9 $1,750.00

RSI-005-S4-2W 5 15.2 3 11 12 8.7 6.5 14 $2,050.00

RSI-007-S4-2W 7.5 22 5 17.5 12 8.7 6.5 14 $2,150.00

RSI-010-S4-2W 10 28 7.5 25.3 17.4 10.8 7.9 30 $3,650.00

RSI-015-S4-2W 15 42 10 37.2 17.4 10.8 7.9 30 $3,950.00

RSI-020-S4-2W 20 54 15 48.3 20.2 11.3 11.7 50 $5,895.00

RSI-025-S4-2W 25 68 20 62.1 20.2 11.3 11.7 50 $6,500.00

110 V Input / 230 V Output

Model NumberStandard Duty Heavy Duty Dimensions (in.)

Weight (lbs.) List PriceHP Amps HP Amps H W D

RSI-001-S4-1SW • 1 4.2 0.5 2.5 9.5 6.5 6.1 9 $1,725.00

• Single phase 110 V input / 3 phase 230 V output

Web stocked



NEMA 4X / NEMA 12 / 460 V

Model NumberStandard Duty Heavy Duty Dimensions (in.)

Weight (lbs.) List PriceHP Amps HP Amps H W D

RSI-001-S4-4W 1 2.1 0.5 1.1 9.5 6.5 6.1 9 $1,650.00

RSI-002-S4-4W 2 3.4 1 2.1 9.5 6.5 6.1 9 $1,700.00

RSI-003-S4-4W 3 4.8 2 3.4 9.5 6.5 8.5 9 $1,750.00

RSI-005-S4-4W 5 7.6 3 4.8 12 8.7 6.5 14 $2,200.00

RSI-007-S4-4W 7.5 11 5 7.6 12 8.7 6.5 14 $2,250.00

RSI-010-S4-4W 10 14 7.5 11 12 8.7 6.5 14 $2,300.00

RSI-015-S4-4W 15 21 10 14 17.4 10.8 7.9 30 $3,700.00

RSI-020-S4-4W 20 27 15 21 17.4 10.8 7.9 30 $4,000.00

RSI-025-S4-4W 25 34 20 27 17.4 10.8 7.9 30 $4,250.00

RSI-030-S4-4W 30 40 25 34 17.4 10.8 7.9 30 $4,575.00

RSI-040-S4-4W 40 52 30 40 20.2 11.3 11.7 50 $7,250.00

RSI-050-S4-4W 50 65 40 52 20.2 11.3 11.7 50 $7,500.00

RSI-060-S4-4W 60 77 50 65 29.4 12.9 13.8 110 $12,500.00

RSI-075-S4-4W 75 96 60 77 29.4 12.9 13.8 110 $13,000.00

RSI-100-S4-4W 100 124 75 96 29.4 12.9 13.8 110 $15,550.00

RSI-125-S4-4D * 125 156 100 124 50.5 16.5 18 354 $22,750.00

RSI-150-S4-4D * 150 180 125 156 50.5 16.5 18 354 $24,750.00

RSI-200-S4-4D * 200 240 150 180 50.5 16.5 18 354 $25,500.00

Web stocked

* Units ending In “D” are NEMA 12 and not washdown rated.


2-13

S4 Series

NEMA 4X / NEMA 12 / 600 V

Model NumberStandard Duty Heavy Duty Dimensions (in.) Weight

(lbs.) List PriceHP Amps HP Amps H W D

RSI-001-S4-6W 1 1.7 0.5 0.9 12 8.7 6.5 14 $2,000.00

RSI-002-S4-6W 2 2.7 1 1.7 12 8.7 6.5 14 $2,200.00

RSI-003-S4-6W 3 3.9 2 2.7 12 8.7 6.5 14 $2,250.00

RSI-005-S4-6W 5 6.1 3 3.9 12 8.7 6.5 14 $2,275.00

RSI-007-S4-6W 7.5 9 5 6.1 12 8.7 6.5 14 $2,450.00

RSI-010-S4-6W 10 11 7.5 9 12 8.7 6.5 14 $2,550.00

RSI-015-S4-6W 15 17 10 11 17.4 10.8 7.9 30 $4,250.00

RSI-020-S4-6W 20 22 15 17 17.4 10.8 7.9 30 $4,350.00

RSI-025-S4-6W 25 27 20 22 17.4 10.8 7.9 30 $4,500.00

RSI-030-S4-6W 30 32 25 27 17.4 10.8 7.9 30 $5,200.00

RSI-040-S4-6W 40 41 30 32 20.2 11.3 11.7 50 $7,500.00

RSI-050-S4-6W 50 52 40 41 20.2 11.3 11.7 50 $7,895.00

RSI-060-S4-6W 60 68 50 52 29.4 12.9 13.8 110 $13,500.00

RSI-075-S4-6W 75 82 60 62 29.4 12.9 13.8 110 $13,750.00

RSI-100-S4-6W 100 107 75 77 29.4 12.9 13.8 110 $15,500.00

RSI-125-S4-6D * 125 125 100 99 50.5 16.5 18 354 $23,250.00

RSI-150-S4-6D * 150 144 125 125 50.5 16.5 18 354 $24,500.00

RSI-200-S4-6D * 200 192 150 140 50.5 16.5 18 354 $27,450.00

* Units ending In “D” are NEMA 12 and not washdown rated.



2-14 benshaw.com

Built-To-Order, 2 Week Shipment

Packaged Drives

Bypass contactor

Input circuit breaker and disconnect

SG Series sensorless

vector drive

NEMA 12 ventilated enclosure

Control power

transformer

User terminal

strip

tr

SGP Series

RATINGS

Standard Duty:

7.5–40 HP @ 230 V 7.5–125 HP @ 460 V

Heavy Duty:

5–30 HP @ 230 V 5–100 HP @ 460 V

Product Highlights:

Benshaw’s Built-To-Order packaged drives meet UL and CE approvals and are available with standard (7.5–125 HP) and heavy duty (5–100 HP) ratings to meet your drive requirements.

Key Advantages:• Standard and heavy duty ratings

• UL and CE approvals

• Pre-designed options configurable to your application

Operating Conditions:• Operating Temperature: -10 to 40°C

• Storage Temperature: -20°C to 65°C

• Humidity: Less than 90% RH max (non-condensing)

• Altitude: 3,300 ft. max.

Standard Features:• NEMA 12 ventilated enclosure

with fans and filters

• SG Series Sensorless Vector Drive

• User terminal strip

• Door mounted keypad

• Control power transformer

• User input and output power connections

• -10° to 40° C operating environment temperature range

• -20° to 65° C storage temperature

Options:• Circuit breaker

• Disconnect fused or unfused

• Input line reactor

• Output reactor

• 3 contactor bypass

• Door mounted operator station (6 configurations)

EMMA

Standard Duty / Heavy Duty


2-15

SGP SeriesPart Number Assembler

SGP 005 2 SD NC A 3B 1 12

Door Mounted Devices1 = None

2 = Start / Stop PB, Reset PB, HOA Switch, Speed POT

3 = Option 2 Plus Power On, VFD Running, VFD Fault Light

4 = Start / Stop PB, Fault Reset PB, HOA Switch, Speed POT, Jog PB, Fwd / Rev Switch, VFD Fault Light

5 = VFD / Off / Bypass Switch, Bypass Running Light

6 = Start / Stop PB, Reset PB, HOA Switch, Speed POT, VFD Running Light, VFD /Off / Bypass Switch, Bypass Running Light

Bypass TypeNN = None

3B = 3 Contactor Bypass

Reactor OptionsA = No Reactors

B = Input Reactor

C = Output Reactor

D = Input and Output Reactor

Enclosure12 = NEMA 12 V

SG Built-to-Order Packaged Drives

Horsepower005 = 5 HP

007 = 7.5 HP

010 = 10 HP

015 = 15 HP

020 = 20 HP

025 = 25 HP

030 = 30 HP

040 = 40 HP

050 = 50 HP

060 = 60 HP

075 = 75 HP

125 = 125 HP

Voltage2 = 230 V

4 = 460 V

Duty TypeSD = 120% 1 Min. Std. Duty

HD = 150% 1 Min. Heavy Duty

Disconnect OptionNC = Non-Combination

CB = Circuit Breaker

FD = Fusible Disconnect

CF = Non-Fused Disconnect

IF = Inline Fuse

ors

ctor

eactor

Output Reactor

Bypass TypeNN = None

3B = 3 Contacto

Reactor OptionsA = No Re

B = Input R

C = Outpu

D = Input a

e120% 1 Min. Std. Duty

150% 1 Min. Heavy Duty

seacto

Reac

ut Re

and O

Packaged Drives


2-16 benshaw.com


Packaged DrivesSGP SeriesStandard Duty Rated 120% O/L for 1 Minute

230 VAC, 3-Phase Input and Output, 50/60 Hz Input, NEMA 12 Ventilated

Model Number HP A

Dimensions (in.)

Weight (lbs.) List PriceH W D

SGP0072SDXXXXXX12 7.5 22 30 24 16 90 $5,275.00

SGP0102SDXXXXXX12 10 28 30 24 16 93 $5,325.00

SGP0152SDXXXXXX12 15 42 36 30 16 99 $5,545.00

SGP0202SDXXXXXX12 20 54 36 30 16 104 $5,995.00

SGP0252SDXXXXXX12 25 68 36 30 16 110 $6,385.00

SGP0302SDXXXXXX12 30 80 36 30 16 148 $6,745.00

SGP0402SDXXXXXX12 40 104 36 30 16 158 $6,825.00


Model Number HP A

Dimensions (in.)


SGP0074SDXXXXXX12 7.5 11 30 24 16 90 $5,295.00

SGP0104SDXXXXXX12 10 14 30 24 16 93 $5,345.00

SGP0154SDXXXXXX12 15 21 30 24 16 99 $5,565.00

SGP0204SDXXXXXX12 20 27 30 24 16 104 $5,965.00

SGP0254SDXXXXXX12 25 34 30 24 16 110 $6,300.00

SGP0304SDXXXXXX12 30 40 36 30 16 148 $6,735.00

SGP0404SDXXXXXX12 40 52 36 30 16 158 $6,825.00

SGP0504SDXXXXXX12 50 65 36 30 16 174 $8,175.00

SGP0604SDXXXXXX12 60 77 36 30 16 174 $9,625.00

SGP0754SDXXXXXX12 75 96 36 30 16 178 $10,525.00

SGP1004SDXXXXXX12 * 100 125 46 30 16 259 $12,425.00

SGP1254SDXXXXXX12 * 125 156 46 30 16 259 $14,355.00

* Dimensions will increase to 70x30x18 for units with three contactor bypass.

Refer to page 2-18 for Disconnect Options, Reactor Options, Bypass Type and Door Mounting Devices


2-17

SGP SeriesHeavy Duty Rated 150% O/L for 1 Minute


Model Number HP A

Dimensions (in.)


SGP0052HDXXXXXX12 5 17 30 24 16 90 $5,275.00

SGP0072HDXXXXXX12 7.5 23 30 24 16 90 $5,325.00

SGP0102HDXXXXXX12 10 33 30 24 16 93 $5,545.00

SGP0152HDXXXXXX12 15 44 36 30 16 99 $5,995.00

SGP0202HDXXXXXX12 20 54 36 30 16 104 $6,385.00

SGP0252HDXXXXXX12 25 68 36 30 16 110 $6,745.00

SGP0302HDXXXXXX12 30 84 36 30 16 148 $6,825.00


Model Number HP A

Dimensions (in.)


SGP0054HDXXXXXX12 5 8 30 24 16 90 $5,295.00

SGP0074HDXXXXXX12 7.5 11 30 24 16 90 $5,345.00

SGP0104HDXXXXXX12 10 14 30 24 16 93 $5,565.00

SGP0154HDXXXXXX12 15 21 30 24 16 99 $5,965.00

SGP0204HDXXXXXX12 20 27 30 24 16 104 $6,300.00

SGP0254HDXXXXXX12 25 34 36 30 16 110 $6,735.00

SGP0304HDXXXXXX12 30 40 36 30 16 148 $6,825.00

SGP0404HDXXXXXX12 40 52 36 30 16 158 $8,175.00

SGP0504HDXXXXXX12 50 65 36 30 16 174 $9,625.00

SGP0604HDXXXXXX12 60 77 36 30 16 174 $10,525.00

SGP0754HDXXXXXX12 * 75 96 46 30 16 178 $12,425.00

SGP1004HDXXXXXX12 * 100 125 46 30 16 259 $14,355.00

* Dimensions will increase to 70x30x18 for units with three contactor bypass.

Refer to page 2-18 for Disconnect Options, Reactor Options, Bypass Type and Door Mounting Devices

Packaged Drives


2-18 benshaw.com


Packaged DrivesSGP SeriesModular Control Options to Customize Your ApplicationOptions CO1 CO2 CO3 CO4 CO5 CO6

Keypad • • • • • •

Start PB • • • •

Stop PB • • • •

Reset PB • • • •

HOA Switch • • • •

Speed POT • • • •

Run Light • •

Fault Light • •

Power On Light •

Jog PB •

FWD/REV Switch •

VFD/OFF Bypass Switch • •

Bypass Running Light • •

List Price $125.00 $350.00 $325.00 $550.00 $300.00 $500.00If selecting a unit with bypass, you must select either option 5 or 6.Door mounted keypad is standard.

230 VAC Drive AdderHP CB N-F Disc Fsd Disc Input Fuse In-React Out-React 3-Cnt Bypass

5 $400.00 $235.00 $529.00 $200.00 $259.00 $259.00 $545.00

7.5 $400.00 $235.00 $529.00 $165.00 $259.00 $259.00 $545.00

10 $400.00 $235.00 $529.00 $188.00 $301.00 $301.00 $545.00

15 $450.00 $235.00 $659.00 $214.00 $308.00 $308.00 $823.00

20 $450.00 $235.00 $659.00 $367.00 $327.00 $327.00 $976.00

25 $500.00 $588.00 $1,459.00 $367.00 $414.00 $414.00 $1,129.00

30 $550.00 $588.00 $1,459.00 $416.00 $438.00 $438.00 $1,129.00

40 $850.00 $824.00 $1,471.00 $471.00 $664.00 $664.00 $1,600.00

460 VAC Drive AdderHP CB N-F Disc Fsd Disc Input Fuse In-React Out-React 3-Cnt Bypass

5 $400.00 $235.00 $412.00 $99.00 $290.00 $290.00 $545.00

7.5 $400.00 $235.00 $412.00 $99.00 $315.00 $315.00 $545.00

10 $400.00 $235.00 $412.00 $99.00 $350.00 $350.00 $545.00

15 $400.00 $235.00 $412.00 $165.00 $400.00 $400.00 $545.00

20 $400.00 $235.00 $494.00 $188.00 $423.00 $423.00 $545.00

25 $400.00 $305.00 $494.00 $200.00 $423.00 $423.00 $640.00

30 $550.00 $305.00 $538.00 $214.00 $490.00 $490.00 $800.00

40 $550.00 $353.00 $720.00 $367.00 $515.00 $515.00 $900.00

50 $550.00 $353.00 $720.00 $367.00 $575.00 $575.00 $1,125.00

60 $550.00 $835.00 $1,212.00 $416.00 $585.00 $585.00 $1,125.00

75 $700.00 $835.00 $1,212.00 $471.00 $795.00 $795.00 $1,570.00

100 $800.00 $950.00 $1,650.00 $682.00 $890.00 $890.00 $1,570.00

125 $1,100.00 $950.00 $1,650.00 $710.00 $1,090.00 $1,090.00 $1,650.00


2-19


Input Line Reactors

230 VModel Number

HP A

Open Dimensions (in.) Enclosed Dimensions (in.) Weight (lbs.)

Open List Price

Enclosed List PriceOpen Enclosed (NEMA 1) H W D H W D

REA-KDRA25L REA-KDRA25L-C1 1 4.6 4 4.18 3.75 6.5 8 6 8 $185.00 $400.00



REA-KDRB22L REA-KDRB22L-C1 5 16.7 5 6 4 6.5 8 6 12 $300.00 $525.00

REA-KDRB23L REA-KDRB23L-C2 7.5 24.2 5 6 4 7.5 10 7 14 $325.00 $575.00

REA-KDRD25L REA-KDRD25L-C2 10 30.8 5.75 7.2 4.25 7.5 10 7 18 $355.00 $625.00



REA-KDRC22L REA-KDRC22L-C2 25 74.8 5.75 7.2 5 7.5 10 7 21 $635.00 $885.00

REA-KDRF24L REA-KDRF24L-C4 30 88 7 9 6 15.5 15 13 65 $650.00 $1,255.00


Line reactors reduce harmonics and protect the variable frequency drive from input power quality problems.They are also required on applications where the transformer impedance exceeds 10 times the kVA rating of the drive.

3% Impedance


2-20 benshaw.com

480 VModel Number

HP A


Open List Price






REA-KDRA4L REA-KDRA4L-C1 7.5 11 4 4.18 3.75 6.5 8 6 8 $250.00 $465.00

REA-KDRA5L REA-KDRA5L-C1 10 14 4 4.18 3.75 6.5 8 6 9 $315.00 $525.00

REA-KDRB2L REA-KDRB2L-C1 15 21 5 6 4 6.5 8 6 12 $365.00 $585.00


REA-KDRD1L REA-KDRD1L-C2 25 34 5.75 7.2 4.25 7.5 10 7 16 $425.00 $685.00


REA-KDRC1L REA-KDRC1L-C2 40 52 5.75 7.2 5 7.5 10 7 21 $595.00 $855.00

REA-KDRF2L REA-KDRF2L-C3 50 65 7 9 6 9 12 8 37 $695.00 $1,065.00



REA-KDRH3L REA-KDRH3L-C4 100 124 7 9 7 15.5 15 13 65 $1,100.00 $1,725.00



REA-KDRG3L REA-KDRG3L-C4 200 240 9 11 8 15.5 15 13 100 $2,050.00 $2,650.00



REA-KDRJ2L REA-KDRJ2L-C5 350 414 9 11 9 18.5 20 16 120 $2,655.00 $3,475.00


REA-KDRL2L REA-KDRL2L-C5 500 590 11.38 14.5 9.5 18.5 20 16 160 $5,165.00 $5,985.00

REA-KDRL3L REA-KDRL3L-C5 600 720 11.38 14.5 9.5 18.5 20 16 205 $6,545.00 $7,355.00

REA-KDRS1L REA-KDRS1L-C7 700 840 11.38 15 12.5 36 28.5 30.3 318 $7,650.00 $9,785.00

Line reactors reduce harmonics and protect the variable frequency drive from input power quality problems.

They are also required on applications where the transformer impedance exceeds 10 times the kVA rating of the drive.

3% Impedance


Input Line Reactors


2-21

600 VModel Number

HP A


Open List Price






REA-KDRA48L REA-KDRA48L-C1 7.5 9 4 4.18 3.75 6.5 8 6 8 $285.00 $500.00

REA-KDRA49L REA-KDRA49L-C1 10 11 4 4.18 3.75 6.5 8 6 9 $325.00 $550.00





REA-KDRC43L REA-KDRC43-C2 40 41 5.75 7.2 5 7.5 10 7 21 $465.00 $725.00

REA-KDRC44L REA-KDRC44L-C2 50 52 5.75 7.2 5 7.5 10 7 21 $495.00 $755.00






REA-KDRI42L REA-KDRI42L-C4 200 192 9 11 7 15.5 15 13 85 $1,445.00 $2,055.00







3% Impedance

Input Line Reactors


2-22 benshaw.com

5% Impedance


Input Line Reactors

240 VModel Number

HP A


Open List Price


REA-KDRA25H REA-KDRA25H-C1 1 4.6 4 4.18 3.75 6.5 8 6 8 $225.00 $435.00



REA-KDRB25H REA-KDRB25H-C1 5 16.7 5 6 4 6.5 8 6 12 $345.00 $555.00

REA-KDRB26H REA-KDRB26H-C1 7.5 24.2 5 6 4 6.5 8 6 12 $410.00 $625.00

REA-KDRD21H REA-KDRD21H-C2 10 30.8 5.75 7.2 4.25 7.5 10 7 18 $425.00 $675.00

REA-KDRD22H REA-KDRD22H-C2 15 46.2 5.75 7.2 4.25 7.5 10 7 18 $545.00 $795.00

REA-KDRC22H REA-KDRC22H-C2 20 59.4 5.75 7.2 5 7.5 10 7 21 $615.00 $865.00

REA-KDRF28H REA-KDRF28H-C3 25 74.8 7 9 6 9 12 8 42 $725.00 $1,085.00

REA-KDRF25H REA-KDRF25H-C4 30 88 7 9 6 15.5 15 13 65 $745.00 $1,355.00

REA-KDRF26H REA-KDRF26H-C4 40 114 7 9 6 15.5 15 13 65 $995.00 $1,625.00




2-23

5% Impedance

480 VModel Number

HP A


Open List Price


REA-KDRA8H REA-KDRA8H-C1 1 2.1 4.00 4.18 3.75 6.5 8 6 8 $215.00 $425.00




REA-KDRA4H REA-KDRA4H-C1 7.5 11 4.00 4.18 3.75 6.5 8 6 9 $375.00 $585.00

REA-KDRA5H REA-KDRA5H-C1 10 14 4.00 4.18 3.75 6.5 8 6 9 $465.00 $675.00

REA-KDRB2H REA-KDRB2H-C1 15 21 5.00 6.00 4.00 6.5 8 6 11 $475.00 $695.00

REA-KDRC3H REA-KDRC3H-C1 20 27 5.75 7.20 5.0 6.5 8 6 19 $535.00 $785.00

REA-KDRC1H REA-KDRC1H-C2 25 34 5.75 7.20 5.0 7.5 10 7 21 $635.00 $895.00

REA-KDRE2H REA-KDRE2H-C2 30 40 5.75 7.20 5.0 7.5 10 7 22 $725.00 $985.00

REA-KDRF4H REA-KDRF4H-C3 40 52 7.00 9.00 6.00 9 12 8 37 $755.00 $1,125.00

REA-KDRF1H REA-KDRF1H-C3 50 65 7.00 9.00 6.00 9 12 8 37 $1,050.00 $1,400.00

REA-KDRF2H REA-KDRF2H-C3 60 77 7.00 9.00 6.00 9 12 8 37 $1,075.00 $1,445.00

REA-KDRH2H REA-KDRH2H-C4 75 96 9.00 11.00 7.00 15.5 15 13 80 $1,225.00 $1,835.00

REA-KDRI2H REA-KDRI2H-C4 100 124 9.00 11.00 7.00 15.5 15 13 87 $1,465.00 $2,075.00

REA-KDRG3H REA-KDRG3H-C4 125 156 9.00 11.00 7.00 15.5 15 13 90 $1,645.00 $2,255.00

REA-KDRG1H REA-KDRG1H-C4 150 180 9.00 11.00 7.00 15.5 15 13 90 $2,000.00 $2,625.00

REA-KDRJ1H REA-KDRJ1H-C5 200 240 9.00 11.00 7.00 18.5 20 16 120 $2,665.00 $3,485.00

REA-KDRL1H REA-KDRL1H-C5 250 302 11.38 14.50 9.50 18.5 20 16 160 $2,915.00 $3,735.00






REA-KDRS1H REA-KDRS1H-C7 600 720 11.38 15.00 13.00 36 28.5 30.3 420 $7,025.00 $9,075.00

REA-KDRS2H REA-KDRS2H-C7 700 840 11.38 15.00 13.00 36 28.5 30.3 420 $8,195.00 $9,825.00



Input Line Reactors


2-24 benshaw.com

5% Impedance


Input Line Reactors

600 VModel Number

HP A

Open Dimensions (in.) Enclosed Dimensions (in.)Weight

(lbs.)Open

List PriceEnclosed List PriceOpen Enclosed (NEMA 1) H W D H W D





REA-KDRB42H REA-KDRB42H-C2 7.5 9 5 6 4 7.5 10 7 14 $435.00 $695.00

REA-KDRB43H REA-KDRB43H-C2 10 11 5 6 4 7.5 10 7 14 $485.00 $745.00

REA-KDRB44H REA-KDRB44H-C2 15 17 5 6 4 7.5 10 7 14 $500.00 $755.00

REA-KDRD41H REA-KDRD41H-C2 20 22 5.75 7.2 4.25 7.5 10 7 18 $535.00 $785.00

REA-KDRC43H REA-KDRC43H-C2 25 27 5.75 7.2 5 7.5 10 7 21 $575.00 $835.00

REA-KDRE42H REA-KDRE42H-C2 30 32 5.75 7.2 5 7.5 10 7 22 $675.00 $925.00

REA-KDRF44H REA-KDRF44H-C3 40 41 7 9 6 9 12 8 42 $795.00 $1,165.00

REA-KDRF45H REA-KDRF45H-C3 50 52 7 9 6 9 12 8 42 $1,025.00 $1,385.00

REA-KDRH43H REA-KDRH43H-C4 60 62 9 11 6 15.5 15 13 80 $1,095.00 $1,715.00

REA-KDRH42H REA-KDRH42H-C4 75 77 9 11 6 15.5 15 13 80 $1,145.00 $1,755.00

REA-KDRI41H REA-KDRI41H-C4 100 99 9 11 7 15.5 15 13 85 $1,665.00 $2,275.00

REA-KDRG44H REA-KDRG44H-C4 125 125 9 11 7.5 15.5 15 13 100 $1,755.00 $2,365.00

REA-KDRG45H REA-KDRG45H-C4 150 144 9 11 8 15.5 15 13 100 $1,825.00 $2,445.00

REA-KDRJ41H REA-KDRJ41H-C5 200 192 9 11 9 18.5 20 16 120 $2,325.00 $3,145.00

REA-KDRL46H REA-KDRL46H-C5 250 242 11.38 15 11 18.5 20 16 160 $3,265.00 $4,085.00







2-25

Output Reactors1.5% Impedance

480 VModel Number

HP A


(lbs.)Open


REA-KDRA1P REA-KDRA1P-C1 2 3.4 4 4.18 3.75 8 6.5 8 6 $245.00 $455.00



REA-KDRA4P REA-KDRA4P-C1 7.5 11 4 4.18 3.75 9 6.5 8 6 $325.00 $525.00

REA-KDRB1P REA-KDRB1P-C1 10 14 5 6 4 11 6.5 8 6 $425.00 $645.00

REA-KDRD1P REA-KDRD1P-C2 15 21 6 7.2 4.25 16 7.5 10 7 $445.00 $695.00




REA-KDRC1P REA-KDRC1P-C2 40 52 5.75 7.2 5 21 7.5 10 7 $665.00 $925.00

REA-KDRF1P REA-KDRF1P-C3 50 65 7 9 6 37 9 12 8 $775.00 $1,150.00

REA-KDRF2P REA-KDRF2P-C3 60 77 7 9 6 37 9 12 8 $795.00 $1,165.00

REA-KDRF3P REA-KDRF3P-C4 75 96 7 9 6 65 15.5 15 13 $1,065.00 $1,675.00

REA-KDRH1P REA-KDRH1P-C4 100 124 9 11 7 75 15.5 15 13 $1,235.00 $1,845.00

REA-KDRI1P REA-KDRI1P-C4 125 156 9 11 7 85 15.5 15 13 $1,525.00 $2,135.00


REA-KDRG1P REA-KDRG1P-C4 200 240 9 11 8 95 15.5 15 13 $2,265.00 $2,875.00

REA-KDRJ1P REA-KDRJ1P-C5 250 302 9 11 9 120 18.5 20 16 $2,495.00 $3,315.00


REA-KDRL1P REA-KDRL1P-C5 350 414 11.38 14.5 9.31 135 18.5 20 16 $2,950.00 $3,765.00




230 V drives/motors can operate with extended lead lengths (<500 ft.) without a load reactor.

If the installation is >500 ft. or involves multiple motors from one drive, use an appropriately sized (current) 480 V reactor or a long lead filter.


2-26 benshaw.com


Output Reactors1.5% Impedance

600 VModel Number

HP A


(lbs.)Open





REA-KDRA34P REA-KDRA34P-C1 7.5 9 4 4.18 3.75 9 6.5 8 6 $425.00 $625.00

REA-KDRA36P REA-KDRA36P-C1 10 11 4 4.18 3.75 9 6.5 8 6 $515.00 $725.00

REA-KDRD31P REA-KDRD31P-C2 15 17 5.75 7.2 4.25 16 7.5 10 7 $525.00 $785.00



REA-KDRD33P REA-KDRD33P-C2 30 32 5.75 7.2 4.25 18 7.5 10 7 $805.00 $1,065.00

REA-KDRD34P REA-KDRD34P-C2 40 41 5.75 7.2 4.25 18 7.5 10 7 $825.00 $1,095.00

REA-KDRC31P REA-KDRC31P-C2 50 52 5.75 7.2 5 21 7.5 10 7 $1,155.00 $1,425.00

REA-KDRF31P REA-KDRF31P-C3 60 62 7 9 6 37 9 12 8 $1,195.00 $1,565.00

REA-KDRF32P REA-KDRF32P-C3 75 77 7 9 6 37 9 12 8 $1,355.00 $1,725.00

REA-KDRF33P REA-KDRF33P-C4 100 99 7 9 6 65 15.5 15 13 $1,625.00 $2,245.00

REA-KDRH31P REA-KDRH31P-C4 125 125 9 11 7 75 15.5 15 13 $1,825.00 $1,445.00



REA-KDRG31P REA-KDRG31P-C4 250 242 9 11 8 95 15.5 15 13 $3,235.00 $3,845.00





2-27

Long Lead Filters (DV / DT)

240 VModel Number

HP A


(lbs.)Open


FLTR-V1K3A00 FLTR-V1K3A01 0.5 3 9.00 5.50 7.25 9 5.5 10 11 $885.00 $1,395.00

FLTR-V1K4A00 FLTR-V1K4A01 0.75 4 9.00 5.50 7.25 9 5.5 10 11 $915.00 $1,400.00

FLTR-V1K6A00 FLTR-V1K6A01 1~1.5 6 9.00 5.50 7.25 9 5.5 10 11 $935.00 $1,425.00

FLTR-V1K8A00 FLTR-V1K8A01 2 8 9.00 5.50 8.25 9 5.5 10 11 $950.00 $1,455.00

FLTR-V1K12A00 FLTR-V1K12A01 3 12 9.00 5.50 8.25 9 5.5 10 11 $985.00 $1,525.00

FLTR-V1K16A00 FLTR-V1K16A01 5 16 9.00 5.50 8.25 9 5.5 10 15 $995.00 $1,545.00

FLTR-V1K25A00 FLTR-V1K25A01 7.5 25 9.00 5.50 8.25 9 5.5 10 15 $1,325.00 $1,725.00

FLTR-V1K35A00 FLTR-V1K35A01 10 35 12.00 8.00 9.00 12 8 11.5 23 $1,435.00 $1,845.00

FLTR-V1K45A00 FLTR-V1K45A01 15 45 12.00 8.00 9.00 12 8 11.5 23 $1,495.00 $1,900.00

FLTR-V1K55A00 FLTR-V1K55A01 20 55 12.00 8.00 9.00 12 8 11.5 23 $1,545.00 $2,075.00

FLTR-V1K80A00 FLTR-V1K80A01 25~30 80 12.00 8.00 9.00 12 8 11.5 29 $2,175.00 $2,705.00

FLTR-V1K110A00 FLTR-V1K110A01 40 110 12.00 8.00 10.25 16.5 18 15 68 $2,555.00 $3,715.00

Long lead filters should be considered on applications where the cable distance between the motor and the variable frequency drive exceeds 300 feet.

Long lead filters protect the motor from high DV/DT.


2-28 benshaw.com


Long Lead Filters (DV / DT)480 V

Model Number

HP A

Open Dimensions (in.)

Enclosed Dimensions (in.)

Weight (lbs.)

Open List Price


FLTR-V1K2A00 FLTR-V1K2A01 0.75 2 9 5.5 7.25 9 5.5 10 11 $865.00 $1,385.00

FLTR-V1K3A00 FLTR-V1K3A01 1~1.5 3 9 5.5 7.25 9 5.5 10 11 $885.00 $1,395.00

FLTR-V1K4A00 FLTR-V1K4A01 2 4 9 5.5 7.25 9 5.5 10 11 $915.00 $1,400.00

FLTR-V1K6A00 FLTR-V1K6A01 3 6 9 5.5 7.25 9 5.5 10 11 $935.00 $1,425.00

FLTR-V1K8A00 FLTR-V1K8A01 5 8 9 5.5 8.25 9 5.5 10 11 $945.00 $1,445.00

FLTR-V1K12A00 FLTR-V1K12A01 7.5 12 9 5.5 8.25 9 5.5 10 11 $985.00 $1,525.00

FLTR-V1K16A00 FLTR-V1K16A01 10 16 9 5.5 8.25 9 5.5 10 15 $995.00 $1,550.00

FLTR-V1K18A00 FLTR-V1K18A01 10 18 9 5.5 8.25 9 5.5 10 15 $1,095.00 $1,625.00

FLTR-V1K21A00 FLTR-V1K21A01 15 21 9 5.5 8.25 9 5.5 10 15 $1,245.00 $1,685.00

FLTR-V1K25A00 FLTR-V1K25A01 15 25 9 5.5 8.25 9 5.5 10 15 $1,325.00 $1,725.00

FLTR-V1K27A00 FLTR-V1K27A01 20 27 9 5.5 8.25 9 5.5 10 15 $1,375.00 $1,785.00

FLTR-V1K35A00 FLTR-V1K35A01 25 35 12 8 9 12 8 11.5 23 $1,435.00 $1,845.00

FLTR-V1K45A00 FLTR-V1K45A01 30 45 12 8 9 12 8 11.5 23 $1,495.00 $1,905.00

FLTR-V1K55A00 FLTR-V1K55A01 40 55 12 8 9 12 8 11.5 23 $1,545.00 $2,075.00

FLTR-V1K80A00 FLTR-V1K80A01 50~60 80 12 8 9 12 8 11.5 29 $2,175.00 $2,705.00

FLTR-V1K110A00 FLTR-V1K110A01 75 110 12 8 10.25 16.5 18 15 68 $2,555.00 $3,715.00

FLTR-V1K130A00 FLTR-V1K130A01 100 130 8.5 11.75 9.5 16.5 18 15 83 $2,985.00 $4,185.00

FLTR-V1K160A00 FLTR-V1K160A01 125 160 8.5 11.75 10.5 16.5 18 15 83 $3,295.00 $4,495.00

FLTR-V1K200A00 FLTR-V1K200A01 150 200 8.5 11.75 9.25 16.5 18 15 93 $3,585.00 $4,675.00

FLTR-V1K250A00 FLTR-V1K250A01 200 250 8.5 11.75 9.25 16.5 18 15 93 $3,685.00 $4,765.00

FLTR-V1K305A00 FLTR-V1K305A01 250 305 8.75 11.75 12.25 16.5 18 30 117 $4,000.00 $4,795.00

FLTR-V1K362A00 FLTR-V1K362A01 300 362 8.75 11.75 12 16.5 18 30 117 $4,585.00 $5,335.00

FLTR-V1K420A00 FLTR-V1K420A01 350 420 10 11.75 13.75 16.5 18 30 132 $5,315.00 $5,785.00

FLTR-V1K480A00 FLTR-V1K480A01 400 480 10 11.75 13.75 16.5 18 30 138 $5,675.00 $6,485.00

FLTR-V1K600A00 FLTR-V1K600A01 500 600 12.75 15 13.75 16.5 18 30 168 $5,945.00 $7,085.00

FLTR-V1K750A00 FLTR-V1K750A01 600 750 12.75 15 14.5 16.5 18 30 180 $9,695.00 $12,695.00


Long lead filters protect the motor from high DV / DT.


2-29

600 V

Model Number

HP A

Open Dimensions (in.)

Enclosed Dimensions (in.)

Weight (lbs.)

Open List Price


FLTR-V1K2A00 FLTR-V1K2A01 1 2 9 5.5 7.25 9 5.5 10 11 $865.00 $1,385.00

FLTR-V1K3A00 FLTR-V1K3A01 2 3 9 5.5 7.25 9 5.5 10 11 $885.00 $1,395.00

FLTR-V1K4A00 FLTR-V1K4A01 3 4 9 5.5 7.25 9 5.5 10 11 $915.00 $1,415.00

FLTR-V1K8A00 FLTR-V1K8A01 5 8 9 5.5 8.25 9 5.5 10 11 $945.00 $1,455.00

FLTR-V1K12A00 FLTR-V1K12A01 10 12 9 5.5 8.25 9 5.5 10 11 $985.00 $1,525.00

FLTR-V1K18A00 FLTR-V1K18A01 15 18 9 5.5 8.25 9 5.5 10 15 $1,095.00 $1,625.00

FLTR-V1K25A00 FLTR-V1K25A01 20 25 9 5.5 8.25 9 5.5 10 15 $1,325.00 $1,725.00

FLTR-V1K27A00 FLTR-V1K27A01 25 27 9 5.5 8.25 9 5.5 10 15 $1,375.00 $1,785.00

FLTR-V1K35A00 FLTR-V1K35A01 30 35 12 8 9 12 8 11.5 23 $1,435.00 $1,845.00

FLTR-V1K45A00 FLTR-V1K45A01 40 45 12 8 9 12 8 11.5 23 $1,495.00 $1,905.00

FLTR-V1K55A00 FLTR-V1K55A01 50 55 12 8 9 12 8 11.5 23 $1,545.00 $2,075.00

FLTR-V1K80A00 FLTR-V1K80A01 75 80 12 8 9 12 8 11.5 29 $2,175.00 $2,705.00

FLTR-V1K110A00 FLTR-V1K110A01 100 110 12 8 10.25 16.5 18 15 68 $2,555.00 $3,715.00

FLTR-V1K130A00 FLTR-V1K130A01 125 130 8.5 11.75 9.5 16.5 18 15 83 $2,985.00 $4,185.00

FLTR-V1K160A00 FLTR-V1K160A01 150 160 8.5 11.75 10.5 16.5 18 15 83 $3,295.00 $4,495.00

FLTR-V1K200A00 FLTR-V1K200A01 200 200 8.5 11.75 9.25 16.5 18 15 933 $3,585.00 $4,685.00

FLTR-V1K250A00 FLTR-V1K250A01 250 250 8.5 11.75 9.25 16.5 18 15 93 $3,685.00 $4,765.00

FLTR-V1K305A00 FLTR-V1K305A01 300 305 8.75 11.75 12.25 16.5 18 30 117 $4,015.00 $4,795.00

FLTR-V1K362A00 FLTR-V1K362A01 350 362 8.75 11.75 12 16.5 18 30 117 $4,585.00 $5,345.00

FLTR-V1K420A00 FLTR-V1K420A01 450 420 10 11.75 13.75 16.5 18 30 132 $5,325.00 $5,785.00


Long lead filters protect the motor from high DV / DT.

Long Lead Filters (DV / DT)


2-30 benshaw.com

Dynamic Brake Resistors and Brake Modules

Dynamic brake resistors and modules are used to address over voltage conditions with drives. Over voltage trips occur when the DC bus in the drive increases to the over voltage trip level. This increase in voltage occurs when the mechanical energy in the motor is converted into regenerative electrical energy, which is transferred back into the drive (the motor acts like a generator).

Contact Benshaw for assistance with sizing brake resistors and brake modules.

Regeneration can occur on an occasional basis or periodically (cyclical) depending on the type of load. A dynamic brake module and resistor are required to be added to the drive to dissipate this excess power. The module and resistor must be sized correctly depending on the application.

Regeneration occurs when:• The deceleration time is too quick

• The load has high inertia and keeps rotating after the drive output power has decreased below that of the load (Ex: fly wheels, large fans)

• The load is an over hauling load, cyclical or periodic (Ex: pump jack, punch press)

• When the motor suddenly becomes unloaded (Ex: lumber mill saw applications)


2-31

OverviewBenshaw is a recognized industry leader in the shipment of engineered drives from our state-of-the-art factory, with dedicated engineering teams and a complete inventory of components necessary to build engineered solutions for you. Select the enclosure, disconnect, bypass, pilot devices, control strategy and filters required to meet your most demanding applications.

Control Modifications — Whatever You Specify • Pilot devices, control power transformers, switches, meters,

relays, space heaters, protective devices, PLCs, etc.

Combination Drive Packages — To Meet Your Requirements• Circuit breaker protection

• Non-fused disconnect protection

• Fusible disconnect protection

• Flange or rotary handle mechanism

Bypass Packages — To Fit Your Application • Three contactor

• Reduced voltage solid state starters

Enclosures — To Match Your Environment • Standard designs — NEMA 1, 12, 3R

• Custom enclosures

• Special enclosures — 4, 4X, air conditioned

• Motor control centers

Filters — For Your Unique Application• Line reactors 3% and 5%

• Long lead filters

• Load reactors

• Harmonic filters

• 18 pulse systems

Benshaw builds customized engineered solutions to meet your most

demanding applications.

Engineered Low Voltage Drive Packages


2-32 benshaw.com


VFD Pre-Order Check ListPurchaser Information

Company Name ______________________________________________________________________

Contact Person _______________________________________________________________________

Email ________________________________________________________________________________

Address _____________________________________________________________________________

Phone Number _______________________________________________________________________

Supply — Incoming

1 Primary (Input) Volts _____ VAC

_____KVA _____% Impedance

Short Circuit Capability _____ ISC (Amps)

Secondary (Output) Volts _____

WYE-Delta Connection: Yes No

Grounded Ungrounded

PCC (Point of Common Coupling)

2 Harmonic Restrictions at PCC: Yes No

IEEE 519-1992

Other Connected Loads 3

Other Connected Loads Present? Please list in detail in comments. Ex. PFCC, VFD, etc.

Yes No

Feeder Cable 4 Cable Length _____ Conduit Teck Non-Shielded

Shielded

Main Disconnect 5 Breaker Fusible Disc. Line FusesKAIC Rating _____

Input Isolation Contactor 6 Yes No HP Rated

NEMA Rated

Harmonic Suppression 7

Input Line Reactor

3 or 5 % Imp. Transformer Passive Filter

Active Filter

18 Pulse RFI/EMI Filter

VFD Ratings 8VFD - HP _____ KVA _____ KW _____ V _____

CT VT Volts _____ Amps _____

Model - RSi - _____ HP - _____ V - _____ Encl.

Dynamic Braking 9 Load Type: Decel Only Overhauling

Duty Cycle 5% 10% 25%

50% 100%

Output Filter 10 Reactor Long Lead Sine Wave

50 ft. ~ 300 ft. 300 ft. ~ 1500 ft. > 1500 ft.

Bypass 11 2 Contactor 3 Contactor RVSS HP Rated

NEMA Rated IEC Rated

Overload 12 For ATL Bypass only: Class 1-40 _____

Transformer1

2

3

74

16

17 5

19

6

7

98

10

11

12

13

14

20 21

Other Loads MCC

L

Fuse

VFDRSi

MOTOR

LOAD

T

Enclosure

B+B-

DBR

MECH.INTERLOCK


2-33

Cable Length 13 See 10 Manufacturer _______________________

Length _____ Ft _____ M _____

Cable Specification: Non-Shielded Shielded Conduit

Motor Name Plate Data

14 Manufacturer _________________________

HP _____________ Volts ________________

RPM _______ FLA _______ S.F. __________

Amps ________ KVA/Code_____________

Design____________ Frame_____________

Breakdown torque _______% _______lb-ft

Temperature Rise ___________________°C

Critical speed ____________________ RPM

Insulation VFD Grade NEMA MG 1 -1998, Part 3 1.4.4.2

Yes No; See 10

Over temperature protection: Thermostat Thermistor

RTD and type 100 Pt 10 Cu 100 Ni 20 Ni

Does the motor require a blower for low speed operation? Yes No

Insulated Bearing(s) Yes No

Options 15 Start P/B Local/Remote Sw.

Stop P/B Pilot Lights

Emergency Stop P/B - Run/Stop

HOA Switch - Forward/Reverse

Forward P/B - Jog

Reverse P/B - Power

Jog Forward P/B - Fault

Jog Reverse P/B

Potentiometer

Fault Reset P/B

Other____________________________________________

Enclosure 16 UL Type ________ (1, 12, 3R, 4, 4X)

Ambient temperature range _____°C to _____°C

Altitude 0 to 3,300 ft. (1,000m) Other ________________

Cable Entry/Exit Locations __________________

Enclosure Size Restrictions

H ________ W _________ D __________

Description ____________________________________________________________________

Control 17 Keypad Multi-Motor

Terminal Master Follower

0 to 5 VDC Analog Outputs

0 to 10 VDC Analog Inputs

± 10 VDC Digital Inputs

0/4 to 20 mA Relay Outputs

VFD Pre-Order Check List


2-34 benshaw.com

Communications 18 DeviceNet ModBus RTU

Profibus Other _______________

Moters 19 Motor Amps ______ Motor Volts ____________

Frequency ________ RPM __________________

Other (Please Specify) ______________________

Application Details 20

Constant Torque (150% for 60s)

Standard-Duty Torque (120% for 60s)

Variable Torque (110% for 60s)

Load-Steady Pulsing Regenerative

Speed Range _______ to _______ RPM

Load Flywheel Inertia (WK²)

Load Torque Profile

Breakaway Torque lb.-ft.

Breakaway Torque Duration _______ sec.

Max. Peak Torque _______ lb.-ft.

Accel. Time _______ Decel. Time _______

Torque vs. Speed Curve

Deceleration: Coast Ramp DC Injection

Pump/Fan

Speed _______ Min. Speed _______ Starting and stopping cycle (details) _______________________________________

Holding Brake required? Yes No

Load Details 21 Fan Fin Fan Cooler Cooling Tower Fan

Pump Centrifugal Pump

Centrifugal Compressor

Electrical Submersible Pump (ESP)

PD Pump Slurry Pump

Oil Pump Pumpjack (PG) Progressive Cavity Screw Pump (PCP)

Conveyor Screw Conveyor

Belt Conveyor

Flat Conveyor Bucket Conveyor

Air Conveyor

Extruder Single Extruder

Dual Extruder

Piston Extruder

Other Number Throws

Centrifuge Canter Line

Step-up Transformer:

KVA Vprim Vsec V Z

Gear ratio/Sheave ratio (Motor RPM/Load RPM) _____:_____ Single-phase input

Additional Comments: _____________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________________

VFD Pre-Order Check List (continued)


VFD Pre-Order Check List


2-35

RSI 060 SG 4 NC A 01

VFDRSI = RediStart

Inverter

Sensorless Vector DrivesEngineered PackagesPart Number Assembler

Horsepower1 = 1 HP

2 = 2 HP

3 = 3 HP

5 = 5 HP

7 = 7.5 HP

10 = 10 HP

15 = 15 HP

20 = 20 HP

25 = 25 HP

30 = 30 HP

40 = 40 HP

50 = 50 HP

60 = 60 HP

75 = 75 HP

100 = 100 HP

125 = 125 HP

150 = 150 HP

200 = 200 HP

250 = 250 HP

300 = 300 HP

400 = 400 HP

500 = 500 HP

600 = 600 HP

700 = 700 HP

VFD SeriesSG = Sensorless

Vector Drive

S4 = Washdown Sensorless Vector Drive

Voltage2 = 230 V

4 = 460 V

6 = 600 V

Enclosure**1/12 = NEMA 1/12

4 = NEMA 4*

3R = NEMA 3R

Package TypeA = Packaged Drive,

No Bypass

C = Packaged Drive with Three Contactor Bypass

SS = Packaged Drive with Soft Starter (RVSS) Bypass**

Disconnect OptionsNC = Non-Combination


FD = Fusible Disconnect**

rt

VS

S

ged Drive, pass

ged Drive with Contactor Bypass

ged Drive with tarter (RVSS) s**

* Air conditioning required.

** Consult factory.


2-36 benshaw.com

7.5–40 HP / NEMA 1 and 3R

Model Number

Variable Torque Standard Duty Heavy Duty

A-1A C-1A A-3R C-3R HP Amps HP Amps HP Amps

RSI-007-SG2-NC-XX 7.5 22 7.5 22 5 15.2 $6,200.00 $6,550.00 $6,255.00 $6,535.00

RSI-010-SG2-NC-XX 10 29 10 29 7.5 22 $6,295.00 $6,655.00 $6,745.00 $7,100.00

RSI-015-SG2-NC-XX 15 42 15 42 10 28 $6,595.00 $7,000.00 $7,395.00 $7,825.00

RSI-020-SG2-NC-XX 20 54 20 54 15 42 $7,050.00 $7,555.00 $7,865.00 $8,355.00

RSI-025-SG2-NC-XX 25 68 25 68 20 54 $7,575.00 $8,275.00 $8,375.00 $9,065.00

RSI-030-SG2-NC-XX 30 80 30 80 25 68 $7,925.00 $8,795.00 $8,725.00 $9,595.00

RSI-040-SG2-NC-XX 40 104 40 104 30 80 $8,300.00 $9,385.00 $9,100.00 $10,185.00

A-1A = VFD in fan and filtered enclosure.C-1A = VFD in fan and filtered enclosure with three contactor bypass circuit.A-3R = VFD in fan and filtered enclosure.C-3R = VFD in fan and filtered enclosure with three contactor bypass circuit.For dimensions refer to page 2-50.For options refer to pages 2-44 –2-49.

Variable Torque = 110% current for 1 minute.

Standard Duty = 120% current for 1 minute.

Heavy Duty = 150% current for 1 minute.

SG SeriesEnclosed Drives — Non-Combination Sensorless Vector Drives — 230 V




2-37

Sensorless Vector DrivesSG SeriesEnclosed Drives — Non-Combination Sensorless Vector Drives — 460 V

7.5–700 HP / NEMA 1 and 3R

Model Number


A-1A C-1A A-3R C-3R HP Amps HP Amps HP Amps

RSI-007-SG4-NC-XX 7.5 11 7.5 11 5 8 $6,235.00 $6,495.00 $6,685.00 $6,950.00

RSI-010-SG4-NC-XX 10 14 10 14 7.5 11 $6,295.00 $6,575.00 $6,745.00 $7,050.00

RSI-015-SG4-NC-XX 15 21 15 21 10 14 $6,555.00 $6,950.00 $7,395.00 $7,745.00

RSI-020-SG4-NC-XX 20 27 20 27 15 21 $7,000.00 $7,400.00 $7,865.00 $8,205.00

RSI-025-SG4-NC-XX 25 34 25 34 20 27 $7,455.00 $7,825.00 $8,255.00 $8,625.00

RSI-030-SG4-NC-XX 30 40 30 40 25 34 $7,925.00 $8,355.00 $8,725.00 $9,155.00

RSI-040-SG4-NC-XX 40 52 40 52 30 40 $8,300.00 $8,795.00 $9,100.00 $9,595.00

RSI-050-SG4-NC-XX 50 65 50 65 40 52 $9,845.00 $10,525.00 $10,645.00 $11,345.00

RSI-060-SG4-NC-XX 60 77 60 77 50 65 $11,694.00 $12,625.00 $12,550.00 $13,485.00

RSI-075-SG4-NC-XX 75 96 75 96 60 77 $12,365.00 $13,525.00 $13,225.00 $14,385.00

RSI-100-SG4-NC-XX 100 125 100 125 75 96 $13,665.00 $15,395.00 $14,445.00 $16,185.00

RSI-125-SG4-NC-XX 125 156 125 156 100 125 $15,145.00 $19,765.00 $15,935.00 $18,335.00

RSI-150-SG4-NC-XX 150 180 150 180 125 156 $24,325.00 $27,825.00 $24,915.00 $24,875.00

RSI-200-SG4-NC-XX 200 240 200 240 150 180 $25,995.00 $30,000.00 $26,575.00 $32,425.00

RSI-250-SG4-NC-XX 250 302 250 302 200 240 $28,425.00 $33,000.00 $29,475.00 $34,775.00

RSI-350-SG4-NC-XX 350 414 350 361 250 302 $39,650.00 $44,615.00 $40,685.00 $45,665.00

RSI-400-SG4-NC-XX 400 477 400 477 300 361 $46,675.00 $54,925.00 $47,725.00 $55,975.00

RSI-500-SG4-NC-XX 500 590 500 515 350 414 $58,145.00 $69,675.00 $59,665.00 $62,205.00

RSI-600-SG4-NC-XX 600 731 600 590 400 477 $65,815.00 $77,625.00 $69,700.00 $79,145.00

RSI-700-SG4-NC-XX 700 877 700 804 500 590 $75,145.00 $118,825.00 $76,655.00 $120,945.00

A-1A = VFD in fan and filtered enclosure.C-1A = VFD in fan and filtered enclosure with three contactor bypass circuit.A-3R = VFD in fan and filtered enclosure.C-3R = VFD in fan and filtered enclosure with three contactor bypass circuit.For dimensions refer to page 2-50.For options refer to pages 2-44 –2-49.





2-38 benshaw.com



7.5–40 HP / NEMA 1 and 3R

Model Number


A-1A C-1A A-3R* C-3R* HP Amps HP Amps HP Amps

RSI-007-SG2-CB-XX 7.5 22 7.5 22 5 15.2 $6,555.00 $6,840.00 $7,000.00 $7,295.00

RSI-010-SG2-CB-XX 10 28 10 28 7.5 22 $6,625.00 $7,145.00 $7,075.00 $7,445.00

RSI-015-SG2-CB-XX 15 42 15 42 10 28 $6,945.00 $7,365.00 $7,735.00 $8,165.00

RSI-020-SG2-CB-XX 20 54 20 54 15 42 $7,455.00 $7,950.00 $8,255.00 $8,750.00

RSI-025-SG2-CB-XX 25 68 25 68 20 54 $7,965.00 $8,665.00 $8,775.00 $9,465.00

RSI-030-SG2-CB-XX 30 80 30 80 25 68 $8,500.00 $9,375.00 $9,300.00 $10,175.00

RSI-040-SG2-CB-XX 40 104 40 104 30 80 $9,100.00 $10,185.00 $9,900.00 $10,985.00

A-1A = VFD in fan and filtered enclosure.C-1A = VFD in fan and filtered enclosure with three contactor bypass circuit.A-3R = VFD in fan and filtered enclosure.C-3R = VFD in fan and filtered enclosure with three contactor bypass circuit.*Units should be mounted out of direct sunlightFor dimensions refer to page 2-50.For options refer to pages 2-44 –2-49.




SG SeriesEnclosed Drives — Combination Circuit Breaker Sensorless Vector Drives — 230 V


2-39

Sensorless Vector DrivesSG SeriesEnclosed Drives — Combination Circuit Breaker Sensorless Vector Drives — 460 V

7.5–700 HP / NEMA 1 and 3R

Model Number


A-1A C-1A A-3R* C-3R* HP Amps HP Amps HP Amps

RSI-007-SG4-CB-XX 7.5 11 7.5 11 5 8 $6,535.00 $6,795.00 $6,985.00 $7,250.00

RSI-010-SG4-CB-XX 10 14 10 14 7.5 11 $6,595.00 $6,885.00 $7,045.00 $73,959.00

RSI-015-SG4-CB-XX 15 21 15 21 10 14 $6,895.00 $7,245.00 $7,695.00 $8,045.00

RSI-020-SG4-CB-XX 20 27 20 27 15 21 $7,355.00 $7,745.00 $8,195.00 $8,545.00

RSI-025-SG4-CB-XX 25 34 25 34 20 27 $7,795.00 $8,165.00 $8,595.00 $8,955.00

RSI-030-SG4-CB-XX 30 40 30 40 25 34 $8,265.00 $8,685.00 $9,065.00 $9,495.00

RSI-040-SG4-CB-XX 40 52 40 52 30 40 $8,695.00 $9,195.00 $9,495.00 $9,985.00

RSI-050-SG4-CB-XX 50 65 50 65 40 52 $10,250.00 $10,935.00 $11,050.00 $11,735.00

RSI-060-SG4-CB-XX 60 77 60 77 50 65 $12,315.00 $13,245.00 $13,165.00 $14,100.00

RSI-075-SG4-CB-XX 75 96 75 96 60 77 $13,685.00 $14,845.00 $14,545.00 $15,700.00

RSI-100-SG4-CB-XX 100 125 100 125 75 96 $14,975.00 $16,725.00 $15,765.00 $17,500.00

RSI-125-SG4-CB-XX 125 156 125 156 100 125 $16,465.00 $18,855.00 $17,255.00 $19,650.00

RSI-150-SG4-CB-XX 150 180 150 180 125 156 $25,895.00 $29,385.00 $23,365.00 $28,050.00

RSI-200-SG4-CB-XX 200 240 200 240 150 180 $27,555.00 $31,600.00 $28,145.00 $33,995.00

RSI-250-SG4-CB-XX 250 302 250 302 200 240 $30,735.00 $34,695.00 $31,785.00 $37,085.00

RSI-350-SG4-CB-XX 350 414 300 361 250 302 $42,350.00 $49,465.00 $43,395.00 $50,525.00

RSI-400-SG4-CB-XX 400 477 400 477 300 361 $50,445.00 $60,825.00 $51,495.00 $61,875.00

RSI-500-SG4-CB-XX 500 590 450 515 350 414 $61,500.00 $74,385.00 $63,050.00 $75,900.00

RSI-600-SG4-CB-XX 600 731 500 590 400 477 $72,600.00 $83,225.00 $74,125.00 $84,735.00

RSI-700-SG4-CB-XX 700 877 600 804 500 590 $81,935.00 $125,185.00 $87,445.00 $126,885.00

A-1A = VFD in fan and filtered enclosure.C-1A = VFD in fan and filtered enclosure with three contactor bypass circuit.A-3R = VFD in fan and filtered enclosure.C-3R = VFD in fan and filtered enclosure with three contactor bypass circuit.*Units should be mounted out of direct sunlightFor dimensions refer to page 2-50.For options refer to pages 2-44 –2-49.




2-40 benshaw.com



1–20 HP / NEMA 12 and 3R

Model Number

Standard Duty Heavy Duty

A-12 C-12 A-3R C-3R HP Amps HP Amps

RSI-001-S42-NC-XX 1 7.6 - - $7,225.00 $7,500.00 $7,665.00 $7,965.00

RSI-002-S42-NC-XX 2 11 1 7.6 $7,395.00 $7,675.00 $7,845.00 $8,145.00

RSI-003-S42-NC-XX 3 14 2 11 $7,425.00 $7,725.00 $7,875.00 $8,175.00

RSI-005-S42-NC-XX 5 21 3 14 $7,735.00 $8,025.00 $8,185.00 $8,495.00

RSI-007-S42-NC-XX 7.5 27 5 21 $7,845.00 $8,145.00 $8,295.00 $8,565.00

RSI-010-S42-NC-XX 10 34 7.5 27 $9,100.00 $9,465.00 $9,555.00 $9,925.00

RSI-015-S42-NC-XX 15 40 10 34 $9,400.00 $9,825.00 $10,200.00 $10,645.00

RSI-020-S42-NC-XX 20 52 15 40 $11,485.00 $11,975.00 $12,285.00 $12,775.00

A-12 = VFD in NEMA 1 enclosure.C-12 = VFD in NEMA 1 enclosure with three contactor bypass circuit.A-3R = VFD in fan and filtered enclosure.C-3R = VFD in fan and filtered enclosure with three contactor bypass circuit.For dimensions refer to page 2-51.For options refer to pages 2-44 –2-49.




S4 SeriesEnclosed Drives — Non-Combination Severe Duty Sensorless Vector Drives — 230 V


2-41

Sensorless Vector DrivesS4 SeriesEnclosed Drives — Non-Combination Severe Duty Sensorless Vector Drives — 460 V


Model Number



RSI-001-S44-NC-XX 1 2.1 - - $7,275.00 $7,545.00 $7,725.00 $7,985.00

RSI-002-S44-NC-XX 2 3.4 1 2.1 $7,425.00 $7,685.00 $7,875.00 $8,135.00

RSI-003-S44-NC-XX 3 4.8 2 3.4 $7,495.00 $7,695.00 $7,875.00 $8,195.00

RSI-005-S44-NC-XX 5 7.6 3 4.8 $7,775.00 $8,035.00 $8,225.00 $8,495.00

RSI-007-S44-NC-XX 7.5 11 5 7.6 $7,845.00 $8,100.00 $8,295.00 $8,555.00

RSI-010-S44-NC-XX 10 14 7.5 11 $7,895.00 $8,150.00 $8,315.00 $8,595.00

RSI-015-S44-NC-XX 15 21 10 14 $9,245.00 $9,635.00 $10,085.00 $10,425.00

RSI-020-S44-NC-XX 20 27 15 21 $9,285.00 $9,665.00 $10,125.00 $10,465.00

RSI-025-S44-NC-XX 25 34 20 27 $9,525.00 $9,885.00 $10,325.00 $10,685.00

RSI-030-S44-NC-XX 30 40 25 34 $9,665.00 $10,095.00 $10,465.00 $10,895.00

RSI-040-S44-NC-XX 40 52 30 40 $12,595.00 $13,085.00 $13,385.00 $13,885.00

RSI-050-S44-NC-XX 50 65 40 52 $12,955.00 $13,650.00 $13,755.00 $14,445.00

RSI-060-S44-NC-XX 60 77 50 65 $17,375.00 $18,245.00 $18,175.00 $19,045.00

RSI-075-S44-NC-XX 75 96 60 77 $17,645.00 $18,725.00 $18,445.00 $19,525.00

RSI-100-S44-NC-XX 100 124 75 96 $20,200.00 $21,825.00 $20,945.00 $22,565.00

RSI-125-S44-NC-XX 125 156 100 124 $25,375.00 $27,615.00 $26,115.00 $26,275.00

RSI-150-S44-NC-XX 150 180 125 156 $29,175.00 $32,050.00 $29,655.00 $34,015.00

RSI-200-S44-NC-XX 200 240 150 180 $29,925.00 $33,255.00 $30,400.00 $35,225.00

A-12 = VFD in NEMA 12 enclosure.C-12 = VFD in NEMA 12 enclosure with three contactor bypass circuit.A-3R = VFD in NEMA 3R enclosure.C-3R = VFD in NEMA 3R enclosure with three contactor bypass circuit.For dimensions refer to page 2-51.For options refer to pages 2-44 –2-49.





2-42 benshaw.com




Model Number



RSI-001-S42-CB-XX 1 7.6 - - $7,515.00 $7,800.00 $7,665.00 $8,255.00

RSI-002-S42-CB-XX 2 11 1 7.6 $7,695.00 $7,975.00 $8,145.00 $8,425.00

RSI-003-S42-CB-XX 3 14 2 11 $7,725.00 $8,095.00 $8,195.00 $8,465.00

RSI-005-S42-CB-XX 5 21 3 14 $8,050.00 $8,325.00 $8,485.00 $8,775.00

RSI-007-S42-CB-XX 7.5 27 5 21 $8,135.00 $8,415.00 $8,595.00 $8,865.00

RSI-010-S42-CB-XX 10 34 7.5 27 $9,445.00 $9,800.00 $9,885.00 $10,255.00

RSI-015-S42-CB-XX 15 40 10 34 $9,735.00 $10,165.00 $10,555.00 $10,965.00

RSI-020-S42-CB-XX 20 52 15 40 $11,875.00 $12,625.00 $12,675.00 $13,175.00

A-12 = VFD in NEMA 12 enclosure.C-12 = VFD in NEMA 12 enclosure with three contactor bypass circuit.A-3R = VFD in NEMA 3R enclosure.C-3R = VFD in NEMA 3R enclosure with three contactor bypass circuit.For dimensions refer to page 2-51.For options refer to pages 2-44 –2-49.




S4 SeriesEnclosed Drives — Combination Circuit Breaker Severe Duty Sensorless Vector Drives — 230 V


2-43

Sensorless Vector DrivesS4 SeriesEnclosed Drives — Combination Circuit Breaker Severe Duty Sensorless Vector Drives — 460 V


Model Number



RSI-001-S44-CB-XX 1 2.1 - - $7,575.00 $7,845.00 $8,025.00 $8,285.00

RSI-002-S44-CB-XX 2 3.4 1 2.1 $7,725.00 $7,985.00 $8,175.00 $8,435.00

RSI-003-S44-CB-XX 3 4.8 2 3.4 $7,795.00 $7,995.00 $8,195.00 $8,495.00

RSI-005-S44-CB-XX 5 7.6 3 4.8 $8,075.00 $8,335.00 $8,525.00 $8,785.00

RSI-007-S44-CB-XX 7.5 11 5 7.6 $8,145.00 $8,425.00 $8,595.00 $8,855.00

RSI-010-S44-CB-XX 10 14 7.5 11 $8,195.00 $8,450.00 $8,625.00 $8,895.00

RSI-015-S44-CB-XX 15 21 10 14 $9,545.00 $9,935.00 $10,385.00 $10,735.00

RSI-020-S44-CB-XX 20 27 14 21 $9,625.00 $10,000.00 $10,465.00 $10,805.00

RSI-025-S44-CB-XX 25 34 20 27 $9,855.00 $10,225.00 $10,695.00 $11,025.00

RSI-030-S44-CB-XX 30 40 25 34 $10,000.00 $10,425.00 $10,800.00 $11,225.00

RSI-040-S44-CB-XX 40 52 30 40 $12,985.00 $13,475.00 $13,785.00 $14,275.00

RSI-050-S44-CB-XX 50 65 40 52 $13,350.00 $14,050.00 $14,150.00 $14,845.00

RSI-060-S44-CB-XX 60 77 50 65 $17,950.00 $18,825.00 $18,750.00 $19,625.00

RSI-075-S44-CB-XX 75 96 60 77 $18,875.00 $19,955.00 $19,675.00 $20,755.00

RSI-100-S44-CB-XX 100 124 75 96 $21,435.00 $23,050.00 $22,175.00 $23,795.00

RSI-125-S44-CB-XX 125 156 100 124 $26,625.00 $28,845.00 $27,345.00 $29,585.00

RSI-150-S44-CB-XX 150 180 125 156 $30,465.00 $33,350.00 $30,945.00 $35,300.00

RSI-200-S44-CB-XX 200 240 150 180 $31,250.00 $34,545.00 $31,695.00 $36,500.00

Dashes are shown for clarity.A-12 = VFD in NEMA 12 enclosure.C-12 = VFD in NEMA 12 enclosure with three contactor bypass circuit.A-3R = VFD in NEMA 3R enclosure.C-3R = VFD in NEMA 3R enclosure with three contactor bypass circuit.For dimensions refer to page 2-51.For options refer to pages 2-44 –2-49.





2-44 benshaw.com



Push-ButtonsModel Number Description List Price

A001 Raised Stop Push-Button - Red $85.00

A002 Flush Start Push-Button - Green $85.00

A003 Jog Push-Button - Yellow $85.00

A004 Ol Reset Push-Button - (For External Ol Relay) - Black $85.00

A005 Reset Push-Button - Black $85.00

A006 Raised Push-Button - Specify Color and Function $85.00

A007 Flush Push-Button - Specify Color and Function $95.00

A008 Mushroom Head Stop Push-Button - Red $125.00

A009 Illuminated Push-Button - Specify Color and Function $175.00

Variable Frequency Drive Options — Pilot Devices

Pilot LightsModel Number Description List Price

A021 Red Run Light $125.00

A022 Green Stop Light $125.00

A023 Amber Fault Light $125.00

A024 Green Ready Light $125.00

A025 Amber Bypass Light $125.00

A026 Red Light - Specify Function $145.00

A027 Green Light - Specify Function $145.00

A028 Amber Light - Specify Function $145.00

A029 White Light - Specify Function $145.00

A030 Blue Light - Specify Function $145.00

A031 Push to Test Contact Assembly (Addition to Above) $200.00

A032 Power On Light - White $175.00

Selector SwitchesModel Number Description List Price

A041 Hand - Off - Auto Selector Switch $175.00

A042 Local - Off - Remote Selector Switch $175.00

A043 Key Operated Hand - Off - Auto Selector Switch $225.00

A045 Two Postion Selector Switch - Specify Function $195.00

A046 Three Position Selector Switch - Specify Function $250.00

A047 Other Selector Switch - Specify Function and Type

MetersModel Number Description List Price

A061 Single Phase Analog Ammeter - Includes CTs * $300.00

A062 Analog Ammeter with Three Phase Selector Switch - Includes CTs *

$300.00

A065 Elapsed Time Meter $475.00

A069 Other Power Metering - Specify Function $475.00

* Switchboard type

Space HeatersModel Number Description List Price

A171 Space Heater with Thermostat $450.00

Consult factory

FOR ADDITIONAL OPTIONS - CONTACT FACTORY


2-45

230 V - Input 3% AC Line ReactorsModel Number HP Volt List Price

A500 1 230 $315.00

A501 2 230 $325.00

A502 3 230 $350.00

A503 5 230 $425.00

A504 7.5 230 $475.00

A505 10 230 $495.00

A506 15 230 $500.00

A507 20 230 $525.00

A508 25 230 $695.00

A509 30 230 $700.00

Variable Frequency Drive Options — Line Reactors (Installed)


A570 1 230 $325.00

A571 2 230 $350.00

A572 3 230 $365.00

A573 5 230 $425.00

A574 7.5 230 $435.00

A575 10 230 $450.00

A576 15 230 $550.00

A577 20 230 $625.00

A578 25 230 $750.00

A579 30 230 $775.00

• Line reactors reduce harmonics and protect the variable frequency drive from input power quality

problems. They are also recommended on applications where the transformer impedance exceeds

10 times the KVA rating of the drive.




2-46 benshaw.com




A520 2 460 $195.00

A521 3 460 $235.00

A522 5 460 $255.00

A523 7.5 460 $285.00

A524 10 460 $365.00

A525 15 460 $375.00

A526 20 460 $415.00

A527 25 460 $475.00

A528 30 460 $550.00

A529 40 460 $595.00

A530 50 460 $735.00

A531 60 460 $815.00

A532 75 460 $925.00

A533 100 460 $1,025.00

A534 125 460 $1,395.00

A535 150 460 $1,550.00

A536 200 460 $2,000.00

A537 250 460 $2,200.00

A538 300 460 $2,300.00

A539 350 460 $2,495.00

A540 400 460 $3,325.00

A541 500 460 $4,125.00

A542 600 460 $5,225.00

A543 700 460 $6,125.00







2-47


A600 2 460 $325.00

A601 3 460 $375.00

A602 5 460 $395.00

A603 7.5 460 $425.00

A604 10 460 $465.00

A605 15 460 $475.00

A606 20 460 $550.00

A607 25 460 $625.00

A608 30 460 $695.00

A609 40 460 $775.00

A610 50 460 $975.00

A611 60 460 $995.00

A612 75 460 $1,300.00

A613 100 460 $1,450.00

A614 125 460 $1,595.00

A615 150 460 $1,825.00

A616 200 460 $2,350.00

A617 250 460 $2,495.00

A618 300 460 $2,595.00

A619 350 460 $2,900.00

A620 400 460 $3,595.00

A621 500 460 $4,675.00

A622 600 460 $5,695.00

A623 700 460 $6,555.00








2-48 benshaw.com




A640 1 460 $945.00

A641 2 460 $950.00

A642 3 460 $975.00

A643 5 460 $995.00

A644 7.5 460 $1,100.00

A645 10 460 $1,125.00

A646 15 460 $1,200.00

A647 20 460 $1,295.00

A648 25 460 $1,350.00

A649 30 460 $1,395.00

A650 40 460 $1,425.00

A651 50 - 60 460 $1,895.00

A652 75 460 $2,500.00

A653 100 460 $2,825.00

A654 125 460 $3,000.00

A655 150 460 $3,200.00

A656 200 460 $3,250.00

A657 250 460 $3,300.00

A658 300 460 $3,650.00

A659 350 460 $3,925.00

A660 400 460 $4,400.00

A661 500 460 $9,000.00

A662 600 460

A663 700 460




Consult factory

Variable Frequency Drive Options — Long Lead Filters (Installed)



2-49

Fast Acting Semiconductor Fuses

Model Number

HP

List Price208V 240V 460V 575V

A670 2 3 5 7.5 $350.00

A671 3 - 7.5 10 $350.00

A672 - 5 10 15 $350.00

A673 5 7.5 15 20 $395.00

A674 7.5 10 20 25 $395.00

A675 10 - 25 30 $395.00

A676 - 15 30 40 $395.00

A677 15 20 40 50 $495.00

A678 20 25 50 60 $495.00

A679 25 30 60 75 $495.00

A680 30 40 75 100 $550.00

A681 40 50 100 125 $550.00

A682 40 60 125 150 $695.00

A683 60 75 150 200 $695.00

A684 75 100 200 250 $695.00

A685 100 125 250 300 $1,000.00

A686 125 150 300 400 $1,495.00

A686 150 200 400 500 $1,495.00

A687 200 250 500 600 $1,495.00

A688 250 300 600 700 $1,750.00

A689 300 350 700 -

NOTE: This option adds fast acting semiconductor fuses to the input of the VFD.

Consult factory

Variable Frequency Drive Options




2-50 benshaw.com



230 V

HP

Enclosure Dimensions

No OptionsWith Circuit Breaker

or Line Reactor 3-Contactor Bypass 3-Contactor Bypass

& Circuit Breaker

7.5 30x24x16 30x24x16 30x24x16 30x24x16

10 30x24x16 30x24x16 30x24x16 30x24x16

15 30x24x16 30x24x16 30x24x16 30x24x16

20 30x24x16 30x24x16 30x24x16 30x24x16

25 30x24x16 30x24x16 30x24x16 30x24x16

30 30x24x16 30x24x16 30x24x16 30x24x16

40 36x30x16 36x30x16 36x30x16 36x30x16

SG Series Dimensions

460 V

HP


No OptionsWith Circuit Breaker


& Circuit Breaker

7.5 30x24x16 30x24x16 30x24x16 30x24x16

10 30x24x16 30x24x16 30x24x16 30x24x16

15 30x24x16 30x24x16 30x24x16 30x24x16

20 30x24x16 30x24x16 30x24x16 30x24x16

25 30x24x16 30x24x16 30x24x16 30x24x16

30 30x24x16 30x24x16 30x24x16 30x24x16

40 36x30x16 36x30x16 36x30x16 36x30x16

50 36x30x16 36x30x16 36x30x16 36x30x16

60 36x30x16 36x30x16 36x30x16 36x30x16

75 36x30x16 36x30x16 36x30x16 36x30x16

100 46x30x16 46x30x16 70x30x24 70x30x24

125 46x30x16 46x30x16 70x30x24 70x30x24

150 87x31x24 87x31x24 87x48x24 87x48x24

200 87x31x24 87x31x24 87x48x24 87x48x24

250 87x31x24 87x37x24 87x48x24 87x48x24

350 87x37x24 87x48x24 87x48x24 87x72x24

400 87x37x24 87x48x24 87x48x24 87x72x24

500 87x48x24 87x48x24 87x72x24 87x96x24

600 87x48x24 87x72x24 87x72x24 87x96x24

700 87x48x24 87x72x24

Consult factory


2-51

230 V

HP


N12 No OptionsWith Circuit Breaker


& Circuit Breaker

1 30x24x16 30x24x16 30x24x16 30x24x16

2 30x24x16 30x24x16 30x24x16 30x24x16

3 30x24x16 30x24x16 30x24x16 30x24x16

5 30x24x16 30x24x16 30x24x16 30x24x16

7.5 30x24x16 30x24x16 30x24x16 30x24x16

10 30x24x16 30x24x16 30x24x16 30x24x16

15 30x24x16 30x24x16 30x24x16 30x24x16

20 30x24x16 30x24x16 30x24x16 30x24x16

S4 Series Dimensions

460 V

HP


N12 No OptionsWith Circuit Breaker


& Circuit Breaker

1 30x24x16 30x24x16 30x24x16 30x24x16

2 30x24x16 30x24x16 30x24x16 30x24x16

3 30x24x16 30x24x16 30x24x16 30x24x16

5 30x24x16 30x24x16 30x24x16 30x24x16

7.5 30x24x16 30x24x16 30x24x16 30x24x16

10 30x24x16 30x24x16 30x24x16 30x24x16

15 30x24x16 30x24x16 30x24x16 30x24x16

20 30x24x16 30x24x16 30x24x16 30x24x16

25 30x24x16 30x24x16 30x24x16 30x24x16

30 30x24x16 30x24x16 30x24x16 30x24x16

40 36x30x16 36x30x16 36x30x16 36x30x16

50 36x30x16 36x30x16 36x30x16 36x30x16

60 36x30x16 36x30x16 36x30x16 36x30x16

75 36x30x16 36x30x16 36x30x16 36x30x16

100 46x30x16 46x30x16 70x30x24 70x30x24

125 46x30x16 46x30x16 70x30x24 70x30x24

150 87x31x24 87x31x24 87x48x24 87x48x24

200 87x31x24 87x31x24 87x48x24 87x48x24



2-52 benshaw.com

Benshaw’s success in the OEM and industrial marketplace is a direct result of our willingness as a company to think "beyond the box". We’ve made systems integration a central focus of our business, and we make learning your business a top priority.

By focusing on the bigger picture we gain a better understanding of your process, your control requirements and your market objectives.

We then apply that knowledge toward the development and production of complete, cost-effective, fully integrated control solutions.

Customized Enclosures:

Benshaw takes great pride in our ability to design and deliver custom control enclosures that truly complement the form and function of your machine.

NEMA 1, 12, 3R, 4 and 4X enclosures in unit mount, console mount, free-standing and wall-mount configurations are available to suit your needs.

Every enclosure we design is carefully crafted to meet your dimensional requirements, proto-typed and tested for fit and compliance with relevant safety standards, fabricated to exacting tolerances and finished to your paint specification.

Intelligent Motor Controls:

Benshaw offers a full range of intelligent, programmable, low and medium voltage starters and drives—from fractional to 20,000 HP—to meet a variety of motor control needs.

Motor control products include full voltage starters, solid state reduced voltage starters and variable frequency drives. Reversing, two-speed, DC braking, wye-delta, synchronous and wound rotor control are supported.

Systems integration is a central focus of our business, and a competitive advantage for our customers.

Integrated control solutions using both

zed Enclosures:

takes great pride in our ability tod deliver custom control enclosurescomplement the form and functionachine.

12, 3R, 4 and 4X enclosures in unitonsole mount, free-standing and nt configurations are available ur needs.

closure we design is carefully craftedour dimensional requirements,ed and tested for fit and complianceant safety standards, fabricated g tolerances and finished to your cification.

Intelligent Motor Controls:

Benshaw offers a full range of intelligent,programmable, low and medium voltage starters and drives—from fractional to 20,000HP—to meet a variety of motor control needs.

Motor control products include full voltage starters, solid state reduced voltage starters and variable frequency drives. Reversing, two-speed, DC braking, wye-delta, synchronousand wound rotor control are supported.

cus of our business, and a competitive advantage


2-53

Let our knowledge become your competitive edge.

Integrated Machine Logic:

Benshaw can supply standard or PC-based programmable logic controllers, and will custom design hardware or software to meet process requirements.

Networking capabilities, remote monitoring and custom designed human machine interface packages are also available.

Integrated Control Sensors:

Benshaw can integrate any number of sensors, transducers, relays, switches, meters and protective devices, as required, to precisely monitor and respond to all critical process, machine or environmental variables.

Integrated Power Packages:

Benshaw can also incorporate all of the power distribution components needed for your machine in one simple, plug-and-play package.

Turnkey power distribution packages typically include all internal and external motor control wiring harnesses, power wiring harnesses, motor/machine sensor connections and, if needed, a fully integrated power factor correction unit.

All power systems are factory tested at Benshaw with custom-built machine simulators and wire pull-testers to guarantee reliable performance.

Typical OEM / Industrial Applications• Air and process compressors

• Blowers and air handling equipment

• Chillers

• Conveyors

• Food / liquid processing equipment

• Industrial refrigeration equipment

• Municipal waste / water handling machines

• Pumps

• Pipelines

• Shredders / grinders

• Specialty machinery

• Transfer lines

Benshaw and additional brands.


2-54 benshaw.com2-54 benshaw.com

Whether you need simple modifications made to one of Benshaw’s standard drive packages, a custom engineered, application-specific drive package or a turnkey drive solution, Benshaw can help.

Custom-engineered drive solutions. For any drive application. In any configuration.

Quality assurance testing

Benshaw’s assembly teams perform a preliminary quality assurance inspection before delivery is made. Drive assemblies undergo a variety of testing procedures, including motor operation testing, load testing, control circuit testing, wire pull testing, electrical performance checks, mechanical alignment inspection, torque measurement and user interface / pilot device functionality.

All test processes meet or exceed ISO 9001 requirements, and all tests are documented and archived for quality verification.

Enclosures:• Standard NEMA 1, 12 and 3R

enclosure designs


• NEMA 4, 4X, air conditioned and other special enclosures


• Combination drive packages

• 15–2,000 A circuit breakers

• 40–2,000 A non-fused disconnects

• 30–800 A fusible disconnects

• Flange or rotary handle mechanisms

Control Modifications:

Over 250 control modifications and accessories are available from Benshaw, including:

• Pilot devices

• Control power transformers

• Switches

• Meters

• Relays

• Space heaters

• Protective devices

• PLCs

Bypass Packages:• Three contactor

• Reduced voltage solid state starters

Filters:• Line reactors (3% and 5%)

• Long lead filters

• Passive harmonic filters

• 18 pulse systems (IEEE-519)

Benshaw delivers...no matter what your motor control needs.

With engineering experience and complete motor control system production capabilities, Benshaw delivers all of the competence, convenience and value you’d expect from a leader in engineered control systems.

Whatever your motor control needs may be, Benshaw’s engineering teams and application specialists can help you find a cost-effective, reliable solution.

2-542-54 benshaw.com Return to the Table of Contents

2-55

Clean Power Drives

Product Highlights:

Benshaw’s SG 519 Series drives are designed and manufactured to limit voltage and current distortion levels to within the levels defined by IEEE-519*. This eliminates the need for expensive, time consuming harmonic analysis and avoids the resonance problems associated with inefficient harmonic filters.

Our municipal projects and engineering team will work with you to configure a clean power solution that meets your specifications and requirements.

Modular Design:

The modular design of Benshaw’s SG 519 Series drives eliminates maintenance problems inherent in older drive designs and improves drive reliability by significantly reducing power module part counts. This design approach also allows each drive unit to be custom-tailored to your specific requirements.

Optional Bypass:

An optional bypass design configuration (ATL or RVSS) is available for SG 519 drive packages when mission critical reliability is important and disruptive downtime cannot be tolerated.

Standard Features:• SG Series drive

• NEMA 1 ventilated enclosure

• 65 kAIC circuit breaker with lockable disconnect

• Phase-shifting transformer and line reactor

• 12-pulse rectifier unit

• Control transformer with extra 120 V capacity

• Door-mounted control

• Keypad / display start / stop buttons

• Reset button hand-off-auto switch

• Speed potentiometer

Options• Bypass (ATL or RVSS)

• Line fusing

• Output filter (reactor, long lead or sine wave)

• Enclosures — NEMA 12, 3R, 4 or 4X (with AC unit)

• RTD monitor

• Communications

• Control options to customer specification

* IEEE-519, 1992 Table 10-2 and Table 10-3.

SG 519 Series

RATINGS

Standard Duty:

50–600 HP @ 460 V

Heavy Duty:

50–500 HP @ 460 V

IEEE-519 Compliant


2-56 benshaw.com

RSI 519 060 SG 4 NC A 1/12

VFDRSI = RediStart

Inverter

Engineered PackagesPart Number Assembler

Horsepower050 = 50 HP

060 = 60 HP

075 = 75 HP

100 = 100 HP

125 = 125 HP

150 = 150 HP

200 = 200 HP

250 = 250 HP

300 = 300 HP

400 = 400 HP

500 = 500 HP

600 = 600 HP

700 = 700 HP

VFD SeriesSG = Sensorless

Vector Drive

Voltage4 = 460 V

Enclosure**1/12 = NEMA 1/12

4 = NEMA 4*

3R = NEMA 3R

Package TypeA = Packaged Drive,

No Bypass

C = Packaged Drive with Three Contactor Bypass

SS = Packaged Drive with Soft Starter (SS) Bypass**

Disconnect OptionsNC = Non-Combination**

CB = Circuit Breaker (65 Kaic)

FD = Fusible Disconnect**

VS ged Drive,

pass

ged Drive with Contactor Bypass

ged Drive withtarter (SS) s**

* Air conditioning required.

** Consult factory.


Clean Power Drives

ediStart verter

18 Pulse519 = 18 Pulse


2-57

IEEE-519 460 V, SG Series, NEMA 1, No Bypass

Model Number

Standard Duty Heavy Duty Dimensions (in.)

List PriceHP Amps HP Amps H W D

RSI-519-050-SG-4-CB-A-01 50 65 40 52 90 36 30 $26,231.00

RSI-519-060-SG-4-CB-A-01 60 77 50 65 90 36 30 $28,226.00

RSI-519-075-SG-4-CB-A-01 75 96 60 77 90 36 30 $30,912.00

RSI-519-100-SG-4-CB-A-01 100 124 75 96 90 36 30 $32,230.00

RSI-519-125-SG-4-CB-A-01 125 156 100 124 90 36 30 $35,435.00

RSI-519-150-SG-4-CB-A-01 150 180 125 156 90 48 30 $41,818.00

RSI-519-200-SG-4-CB-A-01 200 240 150 180 90 48 30 $49,121.00

RSI-519-250-SG-4-CB-A-01 250 302 200 240 90 48 36 $52,583.00

RSI-519-300-SG-4-CB-A-01 300 361 250 302 90 78 36 $62,092.00

RSI-519-350-SG-4-CB-A-01 350 414 – – 90 78 36 $65,675.00

RSI-519-400-SG-4-CB-A-01 400 477 300 361 90 78 36 $75,500.00

RSI-519-500-SG-4-CB-A-01 500 590 350 414 90 96 36 $95,639.00

RSI-519-600-SG-4-CB-A-01 600 720 400 477 90 96 36 $120,123.00

RSI-519-700-SG-4-CB-A-01 700 840 500 590 90 96 36 $130,631.00

IEEE-519 460 V, SG Series, NEMA 1, With Bypass (Three Contactor)

Model Number

Standard Duty Heavy Duty Dimensions (in.)


RSI-519-050-SG-4-CB-C-01 50 65 40 52 90 36 30 $26,582.00

RSI-519-060-SG-4-CB-C-01 60 77 50 65 90 36 30 $28,655.00

RSI-519-075-SG-4-CB-C-01 75 96 60 77 90 36 30 $31,352.00

RSI-519-100-SG-4-CB-C-01 100 124 75 96 90 48 30 $32,781.00

RSI-519-125-SG-4-CB-C-01 125 156 100 124 90 48 30 $36,569.00

RSI-519-150-SG-4-CB-C-01 150 180 125 156 90 54 30 $43,006.00

RSI-519-200-SG-4-CB-C-01 200 240 150 180 90 54 30 $50,609.00

RSI-519-250-SG-4-CB-C-01 250 302 200 240 90 78 36 $54,119.00

RSI-519-300-SG-4-CB-C-01 300 361 250 302 90 96 36 $63,790.00

RSI-519-350-SG-4-CB-C-01 350 414 – – 90 96 36 $69,728.00

RSI-519-400-SG-4-CB-C-01 400 477 300 361 90 96 36 $79,553.00

RSI-519-500-SG-4-CB-C-01 500 590 350 414 90 96 36 $99,692.00

RSI-519-600-SG-4-CB-C-01 600 720 400 477 90 96 36 $124,319.00

RSI-519-700-SG-4-CB-C-01 700 840 500 590 90 96 36 $136,031.00

Clean Power Drives


2-58 benshaw.com

IEEE-519 460 V, SG Series, NEMA 1, With Bypass (RVSS)

Model Number

Standard Duty Heavy Duty Dimensions (in.)*


RSI-519-050-SG-4-SS-D-01 50 65 40 52 90 36 30 $27,572.00

RSI-519-060-SG-4-SS-D-01 60 77 50 65 90 36 30 $29,700.00

RSI-519-075-SG-4-SS-D-01 75 96 60 77 90 36 30 $32,559.00

RSI-519-100-SG-4-SS-D-01 100 124 75 96 90 48 30 $34,406.00

RSI-519-125-SG-4-SS-D-01 125 156 100 124 90 48 30 $38,300.00

RSI-519-150-SG-4-SS-D-01 150 180 125 156 90 54 30 $44,825.00

RSI-519-200-SG-4-SS-D-01 200 240 150 180 90 54 30 $52,634.00

RSI-519-250-SG-4-SS-D-01 250 302 200 240 90 78 36 $56,222.00

RSI-519-300-SG-4-SS-01 300 361 250 302 90 114 36 $69,584.00

RSI-519-350-SG-4-SS-D-01 350 414 – – 90 114 36 $76,518.00

RSI-519-400-SG-4-SS-D-01 400 477 300 361 90 114 36 $86,341.00

RSI-519-500-SG-4-SS-D-01 500 590 350 414 90 132 36 $106,480.00

RSI-519-600-SG-4-SS-D-01 600 720 400 477 90 132 36 $131,455.00

RSI-519-700-SG-4-SS-D-01 700 840 500 590 90 132 36

* Enclosure Dimensions

Consult factory

Included in Standard Package:• SG Series VFD

• NEMA 1 ventilated enclosure

• Circuit breaker disconnect

• 18 pulse transformer

• Input line reactor

• Control transformer

• Door-Mounted Control devices (keypad, start / stop, reset, HOA switch, speed potentiometer)

Options• NEMA 12V, 3R, 4, 4X enclosures

• Air conditioning

• Input fusing

• Output reactor

• Long lead filter

• Input filter (in lieu of 18-pulse input)

• Bypass (three contactor or RVSS)

• Control options to customer specification

• Communications


Clean Power Drives


3-1

Medium Voltage Starters

Standard Medium Voltage Starter Products

Next Generation Intelligent Motor Control ....................................3-2

Prepackaged Solid State Starters .......3-4

Built-To-Order, Solid State Reduced Voltage Starters .................. 3-7

Build Your Customized Starter ...........3-8

Engineered-to-Order Capability ......3-10

Engineered Medium Voltage Starter Products

Combination Solid State Starters ..... 3-11

Medium Voltage Starter Order Check List ..............................3-16

Smart Full Voltage ATL Starters ........3-19

Full Voltage ATL Starters ..................3-22

Main Lug Only ..................................3-24

Load Interrupter Switch ....................3-26

Engineered Medium Voltage Starter Options

Pilot Devices ....................................3-28

Control Options ...............................3-30

Motor Protective Relays ................... 3-31

Enclosure and Bus Options ..............3-32

Power Factor Correction Capacitors ........................................3-33

Surge / Lighting Arrestors ................3-34

Surge Capacitors ..............................3-35

Line Reactors ....................................3-36

Documentation ................................ 3-37

Wound Rotor Starters.......................3-38

Wound Rotor Motor Starter Check List .........................................3-39

Synchronous Starters ........................3-40

Synchronous Motor Starter Check List ......................................... 3-41

MX3 Intelligent Motor Control..........3-42

Mission Critical Reliability ................3-44


3-2 benshaw.com


Next Generation Intelligent Motor ControlMX3 Controller

Product Highlights:

Next generation MX3 technology forms the backbone of Benshaw’s entire line of intelligent medium voltage motor controls. With fiber optic firing, enhanced programming capabilities, ease of use and a unique, flexible architecture, Benshaw’s MX3 controller delivers unprecedented functionality and all of the rugged, dependable performance you’ve come to expect from a world leader in solid state motor controls and drives.

MX3 controllers, power components, software and sensors are all designed, built and tested to perform as an integrated control system, eliminating the coordination and performance problems inherent in other forms of reduced voltage starting.

With more built-in features, more configurable options, greater expandability and a broader communications capability than any other motor control on the market, Benshaw’s next generation MX3 technology will shorten your commissioning times, improve motor performance and protection, enhance diagnostic capability and streamline many electrical system monitoring and maintenance tasks.

Key Features:• High performance motor control with multiple starting modes built in


• Integrated motor protection

• Line and motor metering

• Diagnostic capabilities with event log and real-time clock

• Built-in remote self-testing (BIST)

• Expanded communications capabilities

• Intelligent SCR power poles

• Intelligent MV MCC integration

ligentmedium voltage motor controls. With fiber optic firing, enhanced programming capabilities,ease of use and a unique, flexible architecture, Benshaw’s MX3 controller delivers unprecedented functionality and all of the rugged, dependable performance you’ve come to expect from a world leader in solid state motor controls and drives.

MX3 controllers, power components, software and sensors are all designed, built and tested to perform as an integrated control system eliminating the coordination and performance

Product Highlights:

Next generation MX3 technology forms the backbone of Benshaw’s entire line of intelmedium voltage motor controls With fiber optic firing enhanced programming capab

Keypad (Included)

Optional RTD ModulesOptional RTD Modules

Fiber Optic SCR Firing• Integrated technology

• Noise immunity

• High voltage isolation

• Safe, reliable SCR control


3-3

MX3 ControllerControl Features

Multiple Starting Modes:• Voltage ramp

• Current ramp

– Adjustable initial current

– Adjustable maximum current

– Adjustable ramp time

• Torque ramp (TruTorque)

– Adjustable initial torque

– Adjustable maximum torque


• Power ramp




• Linear / tach feedback control

Motor Protection:• Motor thermal overload

• Independent starting and running OLs

• Up to speed timer exceeded

• Low line voltage

• Low line frequency

• High line frequency

• Phase reversal

• Phase loss

• Instantaneous overcurrent

• Overcurrent

• Undercurrent

• Current imbalance

• Ground fault (residual or zero sequence)

• Shorted or open SCR

• Disconnect fault

• Inline contactor fault

• Control power low

• Stack over temperature

• Motor PTC input

• RTD modules

Metering:• Accuracy:

– 3% out-of-box

– 2% factory calibrated

• Average current

• L1 current

• L2 current

• L3 current

• Current imbalance %

• Ground fault current

• Average volts

• L1 – L2 voltage



• Overload %

• Power factor

• Watts

• VA

• VARS

• kW hours

• MW hours

• Phase order

• Line frequency

• Analog input

• Analog output

• Run time — days

• Run time — hours

• # of starts

• Tru Torque %

• Power %

• Peak starting current

• Last starting duration

• RTD temperatures

• Real-time clock

8 Digital Inputs Configurable to:

• Stop

• Fault

• Fault reset

• Bypass / inline confirm

• OL reset

• Local / remote selection

• Heater enable

• Heater disable

• Dual ramp selection

• 1 dedicated start input

• Disconnect

• Slow speed

• Brake enable

• Brake disable

6 Relay Outputs Configurable to:

• Faulted

• Running

• Up to speed

• Alarm condition

• Ready condition

• Locked out

• Over current

• Under current

• OL alarm

• Shunt trip

• Ground fault

• Energy saver indication

• Heating indication

• Cooling fan

1 Analog 4 – 20 mA / 0 – 10 VDC Input Configurable to:

• Trip high level

• Trip low level

1 Analog 4 – 20 mA / 0 – 10 VDC Output Configurable to:

• Current (0 – 200%/0 – 800%)

• Voltage (0 – 150%)

• OL (0 – 150%)

• kW (0 – 10 kW/0 – 100 kW)

• MW (0 – 1 MW)

• Analog input (0 – 100%)

• Firing (0 – 100%)

• Calibration

User Interface:• Event log (99 events)

• Door mounted LCD display

– Set / examine operating parameters

– View status information, line current, voltage and frequency

– Start and stop the solid state starter

1 Communication Port:• ModBus / RS485

Advanced Functionality:• Dual ramp selection

• Adjustable kick current

• Programmable decel modes

• MV BIST test (built-in self test)

Next Generation Intelligent Motor Control


3-4 benshaw.com


Prepackaged Solid State StartersMVRXE Series Emergency ATL Bypass, Severe Duty, Load Break

Fusible DisconnectProduct Highlights:

The Benshaw Medium Voltage Starter is a microprocessor controlled solid state reduced voltage starter for three phase induction motors. The starter provides a closed-loop current ramp for smooth stepless motor acceleration. Supplied in a free standing enclosure.

Enclosures are available in NEMA 12 or NEMA 3R configurations. The medium voltage enclosure consists of two distinct compartments. The medium voltage or power pole section is located in the main body of the enclosure, whereas the low voltage section containing the control logic is located behind the door as an isolated compartment.

Each starter is supplied with a load break isolation switch, Class "R" motor fuses, inline vacuum contactor, solid state power poles and a vacuum bypass contactor, which is used to bypass the SCR power poles once the motor is up to full speed.

The logic control incorporates the MX3 computer that has all the circuitry required to drive the power semiconductors, which are located in the power section.

MVRXE starters provide solid state reduced voltage starting for normal operation and full voltage emergency back-up starting, with complete electronic motor protection at the flip of a switch.

This unique redundant design is ideal for critical applications where downtime is extremely disruptive and cannot be tolerated.

MX3 solid state controls provide precise digital starting and stopping, motor protection, metering, diagnostics and communications, standard.

Key Advantages:• NEMA 12, UL 347 listed

• 45 kV BIL

• Service entrance labeled (optional)

• Built-in self test (BIST) features for "quick commissioning"

• Solid state reduced voltage starting — normal operations

• 425 A load break

• Switch selectable emergency back-up full voltage starter

• MX3-embedded digital control

• Fiber optic SCR firing

• Advanced motor protection

• Advanced metering

• Power quality protection

• Diagnostics and ModBus RTU485 communications standard


3-5

Standard Features:• NEMA 12, solid state starter, UL347 listed,

Class E-2

• 45 kV BIL

• 200 MVA (2300 VAC) / 350 MVA (4160 VAC) short circuit fault rated

• 500% – 30 seconds rated solid state starter — UL347 certified and listed

• 8,000 PIV — UL347 certified and listed at 2.4 kV

• 12,000 PIV — UL347 certified and listed at 4.2 kV

• Fiber optic SCR firing

• Selectable solid state or emergency full voltage operation via selector switch mounted inside of LV compartment

• Load matched Class R fusing with blown fuse indication

• 425 A load break, 5 kV rated disconnect switch, with viewing window, grounding assembly and lockable handle mechanism; mechanically interlocked for safety

• Fixed mounted, start duty rated vacuum contactors for isolation and SCR bypass, wired for normal bypass operation and full voltage start operation, with (2) N/O and (2) N/C auxiliary contacts

• Separately mounted "SPE" series electronic overload device has the following standard features:

– Class 10 – 30 adjustable

– Phase imbalance protection

– 1 NO / 1 NC trip contact

– Phase reversal protection

– "Trip free" design

– Phase loss protection

• Built-in self test (BIST) features for "quick commissioning"

• 120 VAC, 1000 VA CPT with primary and secondary fusing, with 500 VA available for customer use

• Door-mounted start and stop push buttons

• Door-mounted LCD keypad

• Door-mounted run indication light

• Door-mounted local-off-remote switch

• Door-mounted reset button

• Terminal strip mounted inside LV compartment for:

– Remote start / stop control

– Remote up-to-speed indication

– Remote run indication

– Remote fault indication

• Benshaw MX3 controller with complete soft start, soft stop and motor protection capabilities

• 485 communications capabilities — local through door connection or remote from starter (optional)

• ModBus communications standard

Benshaw MVRXE vs. Any Autotransformer StarterMotor Control & Protection Functions Any Auto Transformer Benshaw MVRXE

Soft Start Yes Yes

Soft Stop No Yes

Full Voltage Bypass Starting No Yes

Load Break Disconnect Switch No Yes

Built-In Self Test No Yes

UL 347 / Service Entrance Rated (Optional) No Yes

3 Year Warranty No Yes

Plain English Digital Display No Yes

Electronic OL Protection No Yes

Electronic Power Quality No Yes

Digital Metering No Yes

Embedded Plain English Diagnostics No Yes

Embedded RS485 No Yes

Incoming Line Landing Pad No Yes

Integrated Control & Protection No Yes

UL Zero Sequence Ground Fault * No Yes

* Optional ground fault CT required

Prepackaged Solid State Starters


3-6 benshaw.com


Prepackaged Solid State Starters

MVRXE SeriesEmergency ATL Bypass, Load Break Fusible Disconnect

MVRXE12—2300 V

HP A

Dimensions (in.) Weight (lbs.)

NEMA 12 List Price

NEMA 3R List PriceModel Number H W D

MVRXE12-550-2300 ** 550 133 92 36 32 1,800 $41,495.00 $44,445.00

MVRXE12-750-2300 ** 750 200 92 36 32 1,800 $42,895.00 $45,850.00

MVRXE12-1500-2300 ** 1500 330 92 36 32 1,800 $48,750.00 $52,665.00

Starters are top entry / bottom exit — top exit available upon request. Dimensions and weights are approximate.

** Insert appropriate option code as shown: NEMA 12 = 12 / NEMA 3R = 3R

NOTE: Power fuses ship loose. Please provide motor full load amps at time of order for proper fuse sizing.

Please allow a 4 week lead time.

MVRXE18—4160 V

HP A

Dimensions (in.)

Weight (lbs.)NEMA 12 List Price


MVRXE18-1000-4160 ** 1000 133 92 36 32 2,000 $45,175.00 $48,150.00

MVRXE18-1500-4160 ** 1500 200 92 36 32 2,000 $45,750.00 $48,375.00

MVRXE18-3000-4160 ** 3000 330 92 36 32 2,000 $54,945.00 $57,995.00

Starters are top entry / bottom exit — top exit available upon request. Dimensions and weights are approximate.


** Insert appropriate option code as shown: NEMA 12 = 12 / NEMA 3R = 3R

Web stocked

Modular OptionsModel Number Description List Price

A171 Space Heater with Thermostat (Included In NEMA 3R Option) $495.00

A008 E-Stop Push-Button, Mushroom Head, Red $145.00

A406 8-Channel RTD Module, 100 ohm Platinum (Also Available for Remote Mounting) $2,850.00

A407 16-Channel RTD Module(s), 100 ohm Platinum (Also Available for Remote Mounting) $5,235.00

A408 * Top Hat Enclosure Module for Top Entry (18"H x 30"W x 20"D),Top Left or Top Right Mounting, Accommodates Stress Cones

$2,395.00

A409 Service Entrance Labeled $885.00

A106 Additional 1000 VA Control Power Transformer $865.00

The MVRXE series was designed as an integrated package. Listed above are the available modular options.

For systems requiring more extensive requirements, please refer to the MV engineered section of the this catalog beginning on page 3-12.

Refer to MLO section beginning on page 3-24 for starters that require top/top or bottom/bottom entry/exit locations.

* Top hat will ship loose for customer installation.

Built-to-order: Please allow 2 weeks for shipment of complete MVRXE unit when ordering these options with a stock starter.

Protective Relay OptionsModel Number Description List Price

A875 Ground Fault CT, 2000:1, 4.0:Dia. (For MX3 Use) $795.00

A876 Ground Fault CT, 2000:1, 8.13:Dia. (For MX3 Use) $1,625.00


3-7

4,160 Volt MVRMX Series0–1,500 HP or 1,501–3,000 HP


Solid State Reduced Voltage StartersProduct Highlights:

Benshaw has analyzed and value engineered our MV SSRV Engineered-To-Order product options, and developed a modular architecture to offer those options most ordered on a Built-To-Order program. This has enabled us to offer you a customized product with a reduced lead time. Our goal is to optimize our response to meet your mission critical application needs.

The RediStart CFMVRMX series with MX3 technology is a fully integrated, programmable family of Class E2 load break/combination solid state starters. This integrated design includes control and power electronics, bypass and isolation contactors that reduce maintenance and operating costs when compared to other methods.

Key Advantages:

Protect machinery from failure and excessive maintenance caused by mechanical shock during starting or stopping. The RediStart MVRMX provides smooth, stepless acceleration and controlled deceleration.

Protect electrical systems from disruptive voltage drops and power outages caused by motor locked rotor inrush current. The RediStart MVRMX starter precisely controls the current ramp during start up.

Protect mission critical motors from failure or unscheduled outages caused by machine or electrical system faults. The RediStart MVRMX starter provides complete, high performance, coordinated line monitoring, motor control and protection.

Protective Relay OptionsDescription Specification

Starting Method Closed Loop Current Control Ramp

Torque Ramp

Power Ramp (kW)

Voltage Ramp

Linear Accel / Tach Feedback

Power Ratings Reference Table A (See page 3-9)

Control Input 120 VAC or Dry Contact, 2 or 3 Wire

Standard Insulation Test 2X Rated V + 2,000 V

Nominal Voltage Ratings 4.16 kV

Ambient Temperature 0–40° C to 3,300 ft.

Frequency Range 23–72 Hz on Control Board

Overall Efficiency (W / Bypass) 99.50%

Metering Functions 47 Parameters

Relay Outputs 24 Functions

Over / Under Voltage Protection 10 to 30%

Power Loss (W / Bypass) <0.1 Watt/Amp/Phase

Transient Protection DV/DT Circuits/Phase

PIV Ratings 4 kV: 12,000 V

SCR Firing Technique Hard Gate Continuous Block

Fiber Optic Firing

Basic Impulse Level 45 kV

Short Circuit Current Rating 350 MVA

UL / CUL Yes


Any unit with bus will require additionalMLO section. Please contact the factory

MVB43 225 B 12 S G 1N

NEMA 12 with space heater

NEMA 3R with space heater

(for stand-alone single units)

Yes

Return to theTable of Contents3-8 benshaw.com

Only one option can be selected from each group,with the exception of the ‘Control Options’ section.

Add the appropriate code for the options chosento the code string across the center of the page.

Build yourcustomized starter!

+Bus not required for singlestand-alone unit.

Bus is required for connectionof 2 or more units.

for pricing and delivery.

ChooseBus Options+

8N

800 A

non-insulatedbus

8I

800 A

insulated

bus

1N

1,200 A

non- insulatedbus

1I 1,200 A

insulated

bus

2N

2,000 A

non- insulatedbus

2I

2,000 A

insulated

bus

NRNone

required

Choose Enclosure Options12 NEMA 12

SH

3R

Choose ServiceEntrance Rated

S

N No

0 to 1,500 HP

Choose

Core

Unit

Choose

Motor

Current∗∗

Choose

Exit/

Landing

Option∗∗∗

MVB41 025 T

MVB41 025 B

MVB41 025 C

MVB41 045 T

MVB41 045 B

MVB41 045 C

MVB41 055 T

MVB41 055 B

MVB41 055 C

MVB41 080 T

MVB41 080 B

MVB41 080 C

MVB41 090 T

MVB41 090 B

MVB41 090 C

MVB41 133 T

MVB41 133 B

MVB41 133 C

MVB41 170 T

MVB41 170 B

MVB41 170 C

A B C

1,501 to 3,000 HP

Choose

Core

Unit

Choose

Motor

Current∗∗

Choose

Exit/

Landing

Option∗∗∗

MVB43 025 T

MVB43 025 B

MVB43 025 C

MVB43 045 T

MVB43 045 B

MVB43 045 C

MVB43 055 T

MVB43 055 B

MVB43 055 C

MVB43 080 T

MVB43 080 B

MVB43 080 C

MVB43 090 T

MVB43 090 B

MVB43 090 C

MVB43 133 T

MVB43 133 B

MVB43 133 C

MVB43 170 T

MVB43 170 B

MVB43 170 C

MVB43 225 T

MVB43 225 B

MVB43 225 C

MVB43 330 T

MVB43 330 B

MVB43 330 C

MVB43 360 T

MVB43 360 B

MVB43 360 C

A B C

A B C

∗∗∗Exit / Landing OptionsT Top exit with landing pad

B Bottom exit with landing pad

CTop or bottom exit landing

on bypass contactor

3-9

NEW

Optional

Safety

Feature:

Benshaw’s

answer to

remote

open/close

disconnect

ability.

Please

contact

factory and

reference

part number

EMO-425D

(Electric

Motor

Operator).

∗Indicates ATL option comes with Start and StopPush Buttons i.e. Start Stop Push Buttons cannotbe selected.

No selection = keypad control.Recommend ‘E’ stop option be selected.

∗∗Motor curr ents vs. HP

are typical, confirm actual

motor current. Service

factor not accounted

for, adjust if required.

Table A

Motor A/HP Starter Rating Motor A/HP Starter Rating

<25/200 500% for 30 sec. <133/1000 500% for 30 sec.

<45/350 500% for 30 sec. <170/1250 350% for 30 sec.

<55/400 500% for 30 sec. <225/1700 500% for 30 sec.

<80/600 500% for 30 sec. <330/2500 350% for 30 sec.

<90/700 500% for 30 sec. <360/3000 350% for 30 sec.

Choose Control Options —Choose one option for each item below

A ATL option∗ N None

B Green start

push button

& red stop

extended

push button∗

N None

C Red run light

& green stop

light

N None

D Amber fault

light & black

reset push

button

N None

E Local-off-

remote

3-position

switch

N None

F Emergency

stop push

button

N None

Choose Option Zero SequenceGround Fault Ct 2000:1

(Residual included)

G Yes

N No

Choose Communications Options(RS-485 Modbus RTU standard)

D DeviceNet

E Ethernet

P Profibus

N None

1N D 2 N B N N E E

Choose RTD Options(100 ohm platinum)

2 8-channel RTD

4 16-channel RTD

N None

D E F G H I

D D

E E

F F

G G

H H

I I

Return to theTable of Contents

Example: A 3,000 HP ( ), 225 A ( ) unit with the following options: bottom exit w/landing pad ( ), NEMA 12 Enclosure ( ), ServiceEntrance Rated ( ), with Ground Fault ( ), 1,200 A non-insulated bus ( ), 1,200 A non-insulated bus splice ( ), with DeviceNet ( ),8 channel RTD ( ), without ATL option ( ), with start and stop buttons ( ), without run and stop lights ( ), without fault and reset lights ( ), with alocal-off-remote switch ( ), with emergency stop push button ( ) would build the following code string:

MVB43 225 B 12

S G 1N 1N D

2 N B N N

E F MVB43225B12SG1N1ND2NBNNEF

Choose Bus Splice Options(must match bus option selected)

8N 800 A non-insulated bus splice

8I 800 A insulated bus splice

1N 1,200 A non-insulated bus splice

1I 1,200 A insulated bus splice

2N 2,000 A non-insulated bus splice

2I 2,000 A insulated bus splice

NR None required

3-10 benshaw.com

Benshaw has developed advanced engineering, drafting, materials management and quality systems focused on designing and building customer solutions. This "Engineered-to-Order" capability, combined with an extensive inventory of control components, protective relays, circuit breakers, contactors, enclosures and other electrical / electronic devices, enables Benshaw to quickly ship engineered products.

Control Modifications — Whatever you specify• Over 250 modifications and accessories are available, including: pilot devices,

communication, PLCs, control power transformers, switches, meters, relays, space heaters, protective devices, power factor correction capacitors, surge arrestors and line reactors

Combination Starters — To Meet Your Requirements:• Solid state reduced voltage

• Standard full voltage

• Smart full voltage

• Solid state with full voltage bypass

Power Ratings — To Fit Your Application:• 5 kV Class—10,000 HP

• 7.2 kV Class—30,000 HP

• 15 kV Class—30,000 HP

Enclosures — To Match Your Environment:• Standard designs — NEMA 1, 12, 3R



Engineered-to-Order Capability

benshaw.com3-10 Return to the Table of Contents

3-11

MVRMX Series5 kV / 7.2 kV / 15 kV — Up to 30,000 HP

Product Highlights:

Only Benshaw has designed, built and supports more than 40,000 solid state starters, from 2,300 volts to 15 kV, for applications ranging from pumps, compressors and chillers to fans and blowers, crushers, chippers and conveyors—for every motor type: induction, synchronous, two-speed, reversing and wound rotor.

The RediStart CFMVRMX series with MX3 technology is a fully integrated, programmable family of Class E2 load break/combination solid state starters. This integrated design includes control and power electronics, bypass and isolation contactors that reduce maintenance and operating costs when compared to other methods.

Key Advantages:

Protect machinery from failure and excessive maintenance caused by mechanical shock during starting or stopping. The RediStart MVRMX provides smooth, stepless acceleration and controlled deceleration.

Protect electrical systems from disruptive voltage drops and power outages caused by motor locked rotor inrush current. The RediStart MVRMX starter precisely controls the current ramp during start up.

Protect mission critical motors from failure or unscheduled outages caused by machine or electrical system faults. The RediStart MVRMX starter provides complete, high performance, coordinated line monitoring, motor control and protection.

Precision Engineered Products from Benshaw:


Combination Solid State Starters

Rugged enclosures to match your environment:

• NEMA 1

• NEMA 12

• NEMA 12V

• NEMA 3R

• Marine duty

• Lineups

Specified bus configurations:

• Tin plated copper

• 800 / 1200 / 2000 A

• Top mount

• Environmentally or electrically insulated

• Custom arrangements

• Higher BIL ratings available

• Front access copper ground bus

Specified control and protective devices:

• Protective relays

• RTD monitors

• Custom control / interface configuration

• Pilot devices / PLCs

Specified surge capacitors and lightning arrestors:

Benshaw will design and mount (as an integrated unit) surge capacitors and lightning arrestors to match your electrical system and lightning protection requirements.

Load engineered power factor capacitors and controls:

• Start / run sequencing

• Load matching


3-12 benshaw.com


Combination Solid State StartersMVRMX Series5 kV / 7.2 kV / 15 kV — Up to 30,000 HP

Power Section Features:Description Specification

Starter Type Closed Loop Current Control Ramp

Torque Ramp

Power Ramp (kW)

Voltage Ramp

Linear Accel / Tach Feedback

Power Ratings 350% to 500% FLA for 30 up to 90 Sec. 125% Cont.

Control Input 120 VAC or Dry Contact, 2 or 3 Wire

Standard Insulation Test 2X Rated V + 2,000 V

Nominal Voltage Ratings 2.3 kV to 13.8 kV

Ambient Temperature 0 – 40° C at Sea Level

Frequency Range 23 to 72 Hz on Control Board

Overall Efficiency (with Bypass) 99.50%

Metering Functions 47 Parameters

Relay Outputs 24 Functions

Over/Under Voltage Protection 10 to 30%

Power Loss (with Bypass) <1.0 Watt / Amp / Phase

Transient Protection DV/DT Circuits / Phase

PIV Ratings 2.4 kV:8000 V, 4.2 kV:12000 V

7.2 kV:18000 V, 13.8 kV:34500 V

SCR Firing Technique Continuous Block Gate

Fiber Optic Firing

Status Display and Indicators:LCD Status Display LED Indicators

Each starter will have a keypad/display assembly designed to:

• Set or examine operating parameters

• Provide status information

• Provide real-time information about line current, voltage and frequency

• Provide a means to start and stop the solid state starter

The following LED indicators are provided for advisory status and fault annunciation:

• Power ON

• CPU heart beat

• Communications

• RTD module

• Fiber optic firing


3-13

MVRMX Series

2300 V

V HP FLA

Dimensions (in.) NEMA 1/12 List Price


CFMVRMX12-150-2300 ** 2300 150 36 92 36 32 $37,575.00 $39,850.00

CFMVRMX12-500-2300 ** 2300 500 120 92 36 32 $37,575.00 $39,850.00

CFMVRMX12-750-2300 ** 2300 750 180 92 36 32 $40,125.00 $42,395.00

CFMVRMX12-1000-2300 ** 2300 1000 240 92 36 32 $41,235.00 $43,525.00

CFMVRMX12-1250-2300 ** 2300 1250 300 92 36 32 $41,235.00 $43,525.00

CFMVRMX12-1500-2300 ** 2300 1500 360 92 45 32 $42,250.00 $44,435.00

CFMVRMX12-HP-2300 ** 2300 >1500 >360

3300 V

V HP FLA



CFMVRMX12-300-3300 ** 3300 300 51 92 36 32 $41,325.00 $43,895.00

CFMVRMX12-750-3300 ** 3300 750 127 92 36 32 $41,325.00 $43,995.00

CFMVRMX12-1000-3300 ** 3300 1000 169 92 36 32 $44,150.00 $46,635.00

CFMVRMX12-1250-3300 ** 3300 1250 211 92 36 32 $45,355.00 $47,875.00

CFMVRMX12-1500-3300 ** 3300 1500 254 92 36 32 $45,500.00 $47,995.00

CFMVRMX12-2000-3300 ** 3300 2000 338 92 36 32 $46,375.00 $48,875.00

CFMVRMX12-HP-3300 ** 3300 >2000 >338

CFMVRMX series starters are complete combination E2 controllers. They include a load break / fault make disconnect switch, R rated current limiting motor

fuses, vacuum inline isolation contactor, SCR power stacks and microprocessor controls, CPT and vacuum bypass contactor. MVRMX non-combination starters

are available. Please contact the factory for pricing and application assistance.

** Insert appropriate option code as shown: NEMA 1 = 1 / NEMA 12 = 12 / NEMA 3R = 3R

Consult factory



3-14 benshaw.com


Combination Solid State StartersMVRMX Series

4160 V

V HP FLA



CFMVRMX18-300-4160 ** 4160 300 40 92 36 32 $44,397.60 $46,670.00

CFMVRMX18-750-4160 ** 4160 750 99 92 36 32 $44,475.60 $46,742.80

CFMVRMX18-1000-4160 ** 4160 1000 133 92 36 32 $44,475.60 $46,742.80

CFMVRMX18-1250-4160 ** 4160 1250 166 92 36 32 $44,475.60 $46,742.80

CFMVRMX18-1500-4160 ** 4160 1500 200 92 36 32 $44,475.60 $46,742.80

CFMVRMX18-2000-4160 ** 4160 2000 266 92 36 32 $53,336.40 $55,603.60

CFMVRMX18-2500-4160 ** 4160 2500 333 92 36 32 $53,336.40 $55,603.60

CFMVRMX18-3000-4160 ** 4160 3000 360 92 45 32 $54,132.00 $56,420.00

CFMVRMX18-3500-4160 ** 4160 3500 466 92 96 36 $82,539.60 $84,812.00

CFMVRMX18-4000-4160 ** 4160 4000 532 92 96 36 $82,539.60 $84,812.00

CFMVRMX18-4500-4160 ** 4160 4500 600 92 96 36 $90,422.80 $92,690.00

CFMVRMX18-HP-4160 ** 4160 >4500 >600

6900 V

V HP FLA



CFMVRMX18-500-6900 ** 6900 500 42 92 45 36 $74,438.00 $76,700.00

CFMVRMX18-750-6900 ** 6900 750 63 92 45 36 $74,438.00 $76,700.00

CFMVRMX18-1000-6900 ** 6900 1000 84 92 45 36 $74,438.00 $76,700.00

CFMVRMX18-1250-6900 ** 6900 1250 105 92 45 36 $75,010.00 $77,272.00

CFMVRMX18-1500-6900 ** 6900 1500 126 92 45 36 $75,010.00 $77,272.00

CFMVRMX18-2000-6900 ** 6900 2000 168 92 45 36 $75,010.00 $77,272.00

CFMVRMX18-2500-6900 ** 6900 2500 210 92 45 36 $75,800.40 $78,000.00

CFMVRMX18-3000-6900 ** 6900 3000 252 92 45 36 $75,800.40 $78,000.00

CFMVRMX18-3500-6900 ** 6900 3500 294† 92 45 36 $75,800.40 $78,000.00

CFMVRMX18-4000-6900 ** 6900 4000 336 92 81 36 $115,000.00 $120,000.00

CFMVRMX18-4500-6900 ** 6900 4500 378 92 81 36 $123,266.00 $125,528.00

CFMVRMX18-5000-6900 ** 6900 5000 420 92 81 36 $123,266.00 $125,528.00

CFMVRMX18-5500-6900 ** 6900 5500 462 92 81 36 $125,751.60 $128,024.00

CFMVRMX18-HP-6900 ** 6900 >5500 >462†

CFMVRMX series starters are complete combination E2 controllers. They include a load break / fault make disconnect switch, R rated current limiting motor fuses,

vacuum inline isolation contactor, SCR power stacks and microprocessor controls, CPT and vacuum bypass contactor. CPT is 700 VA standard (6,900 V). MVRMX

non-combination starters are available. Please contact the factory for pricing and application assistance.


† 350% for 30 sec. rated. 500% requires larger sizing. Please contact Benshaw.

Consult factory


3-15

Product Highlights:

Benshaw has designed, built and supported custom 15 kV class solutions for all applications and motor types. Higher voltages bring greater safety concerns, and only Benshaw has over 15 years of experience working with 15 kV class equipment. Whether the equipment is on an oil platform or in a mine, Benshaw has experience with 15 kV class equipment all over the globe. Benshaw’s 15 kV class solutions come with standard MX3 technology that is known, qualified and respected out in the field. Only Benshaw provides 15 kV solutions up to 30,000 HP.

Key Advantages:

Integrated line reactors within our solution. Higher voltages require more sophisticated solutions, and only Benshaw provides line reactors that are integrated into all of our 15 kV class solutions. Benshaw understands the complexities of working in the higher voltages, and provides equipment reliable in running the most critical applications.

Full product portfolios. The heart of solid-state starting is in the power stacks, and Benshaw has the knowledge and experience to understand the complexities of working in the higher voltages. Benshaw has custom solutions for 10 kV, 11 kV and 13 kV class equipment, with each solution consisting of a different design, number of required power electronics and fan cooling if required. When you get a Benshaw 15 kV class starter, you know it will work in the most critical applications, since it’s been designed for the environment.

Full solutions. Higher voltages require specialized equipment. Benshaw’s 15 kV class equipment consists of either a load break disconnect, fusing and vacuum contactors or vacuum circuit breakers for isolation and bypass. Benshaw has the experience and partners to design, develop and ship a fully integrated solution to fit the application needs.

Engineered support from the quotation through the production cycle. Large critical motors require higher voltage solutions. Benshaw understands that these applications require special customized solutions, especially for the largest motors. Benshaw provides a team of engineers to work closely with the end users to design a concept to meet our customer’s needs. Once the order is received, Benshaw seamlessly transfers the solution to the production engineering department to finalize the design. All of the up-front work saves the customer time and gives them exactly what they need.

15 kV Class

Common Voltages:

10 kV11 kV12.47 kV13.2 kV13.8 kV

Customized Entry/Exit:

MLOsCable Entry Top HatsOptional Disconnect/ Fusing Input

Specified Controls and Protection Devices:

Motor Protection RelaysInput Protection RelaysLock-Out RelaysCustom Control/ Interface Configuration

Specialized Options:

Power Factor Correction CapacitorsLightning ArrestorsSurge Capacitors



3-16 benshaw.com

Project Name and/or End-User _________________________________________________________

Contact Name________________________________________________________________________

Email ________________________________________________________________________________

Phone Number _______________________________________________________________________

Medium Voltage Check List to assist in the engineering process of providing a properly manufactured Solid State Starter, which will meet customer specific requirements. Complete each section as this will ensure a timely and accurate response.


Medium Voltage Starter Order Check List

SECTION A — Starter ApplicationType of application ________________________________________________________________________________________________________________

Present starting method:

Across the Line Wye-Delta Auto Transformer Other: ______________________________________

Starts / Stops per day:

1–5 6–10 11–15 16–20 Over 20 (please specify)

__________________________

Current Acceleration Time

1–5 seconds 6–10 seconds 11–15 seconds 16–20 seconds >20 seconds (please specify)

__________________________

Current Deceleration Time (if applicable)

1–5 seconds 6–10 seconds 11–15 seconds 16–20 seconds >20 seconds (please specify)

__________________________

Power source Utility (Transformer feed capacity – kVA) (please specify) _____________________________________________________________

Short Circuit MVA (I) (please specify) ______________________________________________________________________________

Delta Wye (please specify)

3 wire 4 wire

Delta, Corner Grounded

High resistance ground

Solid Ground Ungrounded

Generator (Generator kW rating) (please specify) ___________________________________________________________________

Distance from Line to starter:

< 250 ft. 251–500 ft. 501–750 ft. > 750 ft. (please specify) ________________________

Conductor type:

Shielded Non-Shielded

Distance from Starter to motor:

< 250 ft. 251–500 ft. 501–750 ft. > 750 ft. (please specify) ________________________

Size and Quantity of Conductors:

Line Side Size: ______________________ Line Side Quantity: __________________/Phase

Load Side Size: ______________________ Load Side Quantity: __________________/Phase


3-17

SECTION B — Motor DataType of motor: Induction Synchronous Wound Rotor

Horsepower:__________________(If Synchronous or Wound Rotor, see Section “E” or “F” for additional questions.)

Motor voltage: 2300 4160 6900 13,800 Other: (please specify)

__________________________

Frequency: 25 Hz 50 Hz 60 Hz Other: (please specify) ________________________

NEMA Design: “A” “B” “C” “D” “E”

FLA: _________ Service Factor: ____ Motor LRA: ___________ Motor Speed (RPM): ____________

SECTION C — Enclosure / Environment DataExpected ambient temperature:

Minimum: ________________________________ (Space Heater required if less than 0˚ C)

Maximum: ______________________________

Space heater: Yes No Physical Location: Indoor Outdoor

Size Limitation: _______" High _______" Wide _______" Deep ( please indicate dimensions. )

Altitude: up to 3,300 ft. above 3,300 ft. (please specify) __________________________________

Excessive Vibration and / or Noise:

Vibration Noise Neither

Color: ANSI 61 Grey (standard)

Beige Other: (please specify) _________________

Cable Entry location:

Top (option) Bottom (standard) Cable Exit location: Top (standard) Bottom (option)

Horizontal Bus: NONE (standard) 800 Amp 1200 Amp 2000 Amp Other: (please specify)

__________________________

Insulation on Bus:

Yes (price adder) No (standard)

UL Rating (NEMA Type):

1 3R 12 (standard) Other: (please specify) ________________________

SECTION D — MiscellaneousDisconnect: Fusible Disconnect None

Starting Method:

Keypad (standard) 2-Wire Control 3-Wire Control Other: (please specify) ________________________

Across-the-Line Starting Option:

Yes No (standard)

Will any of the following be present?:

Power Factor Correction Capacitors Note: PFCC must be located on the Line side of the Starter and must be isolated from the line during starting.

Lightning Arrestors Note: May be placed on either the Line or Load side of the Starter.

Surge Capacitors Note: Must be at the motor terminals and must be isolated during starting to prevent damage.



3-18 benshaw.com

SECTION E — Synchronous Motor Data:Normal Field Current: (ADC)

_________________ Max Field Current: (ADC) _________________

Field Discharge Resistor Rating:

_________________Synchronous Motor Field Voltage: (VDC)

_________________

SECTION F — Wound Rotor Motor Data:Wound Rotor Motor:

Starting Duty Resistor Continuous Running Duty Resistor

Quantity of Steps/Resistance:

_________________ Present number of steps: _________________

Secondary Voltage: (VAC)

_________________Secondary Current: (Amps)

_________________

SECTION G — Additional Modifications, Accessories and/or Information:

________________________________________________________________________________________________________________________________

________________________________________________________________________________________________________________________________

________________________________________________________________________________________________________________________________

________________________________________________________________________________________________________________________________

Customer’s Signature __________________________________________________________

Customer’s Company __________________________________________________________

Date ______________________________




3-19

CFMVRMXATL Series

Product Highlights:

The "Smart" Medium Voltage "ATL" package includes the addition of the RediStart MX3 control package for additional branch circuit monitoring motor protection, metering, diagnostics and communication. Refer to MVRMX RediStart MX3 specification for complete details. A sampling of the enhanced features includes:

Protection (ANSI standard numbers given)• 51—Electronic motor overload, class 1 to 40

• 86—Overload lockout

• 59/27—Adjustable over / under voltage protection

• 46—Adjustable line to average current imbalance

• 81—Adjustable high and low frequency protection

• Single phase protection

• 66—Adjustable starts per hour (off or 1 to 20 starts)

• Adjustable time between starts (off or 1 to 600 minutes)

• Backspin timer (off or 1 to 200 minutes)

• 51—Overcurrent detection (off or 50 to 800%) and time (0.1 to 90.0 sec. in 0.1 sec. intervals)

• 37—Undercurrent detection (off or 10 to 100% and time (0.1 to 90.0 sec. in 0.1 sec. intervals)

• 51G—Ground fault detection (off or 1 to 100 amps) and time (0.1 to 90.0 sec. in 0.1 sec. intervals)

• Overcurrent, undercurrent and ground fault can each be set to trip or activate a relay

• 50—Instantaneous electronic overcurrent trip

• 47—Phase rotation selectable ABC, CBA or Ins (insensitive)

• 38/49—Remote mountable RTD protection package, 8 or 16 RTD inputs (optional)

Control• Local start / stop controls

• Emergency reset capability

Input / Output and Display• Plain English operation via back lit LCD display interface

• LCD and LED status and diagnostics (full fault annunciation)

• Programmable metering (amps, volts, frequency, overload, power factor, elapsed time, watts, VARs, watt hours, VA, current imbalance, ground fault current, RTD temperatures with optional RTD module)

• Programmable relay outputs

• Latched fault relay output

• Real time clock

• Time stamped event recorder

• Password protection

• Battery backed-up starter parameters and lockout times

Smart Full Voltage ATL Starters


3-20 benshaw.com


Smart Full Voltage ATL StartersCFMVRMXATL Series






• Phase reversal

• Phase loss


• Overcurrent

• Undercurrent






• Motor PTC input

• RTD modules


– 3% out-of-box


• Average current

• L1 current

• L2 current

• L3 current



• Average volts

• L1–L2 voltage

• L2–L3 voltage

• L3–L1 voltage

• Overload %

• Power factor

• Watts

• VA

• VARS

Metering, continued:• kW hours

• MW hours

• Phase order

• Line frequency

• Analog input

• Analog output

• Run time—days

• Run time—hours

• # of starts

• TruTorque™ %

• Power %




• Real-time clock

8 Digital Inputs Configurable to:• Stop

• Fault

• Fault reset


• OL reset



• Disconnect

6 Relay Outputs Configurable to:• Faulted

• Running

• Up to speed

• Alarm condition

• Ready condition

• Locked out

• Over current

• Under current

• OL alarm

• Shunt trip

• Ground fault

• Cooling fan

1 Analog 4–20 mA / 0-10 VDC Input Configurable to:

• Trip high level

• Trip low level

1 Analog 4–20 mA / 0-10 VDC Output Configurable to:

• Current (0–200%/0–800%)

• Voltage (0–150%)

• OL (0–150%)

• kW (0–10 kW/0–100 kW)

• MW (0–1 MW)

• Analog input (0–100%)

• Firing (0–100%)

• Calibration





– Start and stop the starter


MX3 Control Features (Smart Across the Line)


3-21

CFMVRMXATL Series

2300 V

V HP FLA



CFMVRMXATL-500-2300 ** 2300 500 120 92 24 32 $18,750.00 $20,955.00

CFMVRMXATL-1000-2300 ** 2300 1000 240 92 24 32 $19,650.00 $21,875.00

CFMVRMXATL-1500-2300 ** 2300 1500 360 92 24 32 $20,995.00 $23,250.00

CFRMVRMXATL-HP-2300 ** 2300 >1500 >360

3300 V

V HP FLA



CFMVRMXATL-1000-3300 ** 3300 1000 169 92 24 32 $18,875.00 $21,250.00

CFMVRMXATL-1250-3300 ** 3300 1250 211 92 24 32 $20,500.00 $22,750.00

CFMVRMXATL-1500-3300 ** 3300 1500 254 92 24 32 $20,995.00 $23,250.00

CFMVRMXATL-2000-3300 ** 3300 2000 338 92 24 32 $20,995.00 $23,250.00

CFMVRMXATL-2250-3300 ** 3300 2250 380 92 60 36 $41,555.00 $43,895.00

CFMVRMXATL-2500-3300 ** 3300 2500 423 92 60 36 $41,555.00 $43,895.00

CFRMVRMXATL-HP-3300 ** 3300 >2500 >423

4160 V

V HP FLA



CFMVRMXATL-1000-4160 ** 4160 1000 133 92 24 32 $19,250.00 $22,250.00

CFMVRMXATL-2000-4160 ** 4160 2000 266 92 24 32 $19,750.00 $22,750.00

CFMVRMXATL-2500-4160 ** 4160 2500 333 92 24 32 $20,525.00 $23,650.00

CFMVRMXATL-3000-4160 ** 4160 3000 399 92 60 36 $39,995.00 $43,995.00

CFRMVRMXATL-HP-4160 ** 4160 >3000 >399

6900 V

V HP FLA



CFMVRMXATL-1500-6900 ** 6900 1500 125 92 24 32 $21,250.00 $24,550.00

CFMVRMXATL-2250-6900 ** 6900 2250 187 92 24 32 $23,150.00 $25,375.00

CFMVRMXATL-4000-6900 ** 6900 4000 332 92 24 32 $23,650.00 $25,875.00

CFRMVRMXATL-HP-6900 ** 6900 >4000 >332


Consult factory

OTHER VOLTAGES AVAILABLE — PLEASE INQUIRE

Smart Full Voltage ATL Starters


3-22 benshaw.com


Full Voltage ATL StartersCFMVATL Series Product Highlights:

CFMVATL medium voltage across-the-line starters are full voltage controllers for three phase induction motors. The RediStart MX3 control package can be added as an option to provide a "Smart" CFMVRMXATL package.

Combination CFMVATL starters are supplied in a free standing enclosure. Enclosures are available in NEMA 1, NEMA 12 and NEMA 3R configurations. Enclosure consists of two distinct compartments. The medium voltage section is located in the main body of the enclosure, and the low voltage section containing the control logic is located behind the door in an isolated compartment.

Standard combination CFMVATL starters are supplied with a load break / fault make disconnect isolation switch, Class "R" motor current limiting fuses, vacuum motor starting contactor and the "SPE" SureProtex electronic overload protection. Refer to the CFMVRMXATL series for the RediStart MX3 control package for additional branch circuit monitoring, motor protection, metering, diagnostics and communication.

Standard Features:

The standard medium voltage combination "ATL" package includes:

• NEMA 1,12, 3R enclosure

• Disconnect switch

– Load break / fault make

– Grounding bar

– Viewing window

• Motor fusing

– Class "R"

– Current limiting

• Vacuum motor starting contactor

• Start / stop push-buttons

• "SPE" overload protection

– Class 10-30 adjustable

– 1 N/O, 1 N/C trip contact

– "Trip free" design

– Phase imbalance protection

– Phase reversal protection

– Phase loss protection

– Test function / trip indication

– Fault indication


3-23

2300 V

V HP FLA



CFMVATL-500-2300 ** 2300 500 120 92 24 32 $14,000.00 $16,885.00

CFMVATL-1000-2300 ** 2300 1000 240 92 24 32 $16,500.00 $18,650.00

CFMVATL-1500-2300 ** 2300 1500 360 92 24 32 $17,500.00 $19,850.00

CFMVATL-HP-2300 ** 2300 >1500 >360

3300 V

V HP FLA



CFMVATL-1000-3300 ** 3300 1000 169 92 24 32 $14,850.00 $17,000.00

CFMVATL-1250-3300 ** 3300 1250 211 92 24 32 $15,500.00 $17,765.00

CFMVATL-1500-3300 ** 3300 1500 254 92 24 32 $16,855.00 $17,995.00

CFMVATL-2000-3300 ** 3300 2000 338 92 24 32 $17,000.00 $19,150.00

CFMVATL-2250-3300 ** 3300 2250 380 92 60 36 $37,450.00 $39,735.00

CFMVATL-2500-3300 ** 3300 2500 423 92 60 36 $37,500.00 $37,750.00

CFMVATL-HP-3300 ** 3300 >2500 >423

4160 V

V HP FLA



CFMVATL-1000-4160 ** 4160 1000 133 92 24 32 $15,825.00 $18,000.00

CFMVATL-2000-4160 ** 4160 2000 266 92 24 32 $16,365.00 $18,625.00

CFMVATL-2500-4160 ** 4160 2500 333 92 24 32 $17,250.00 $19,500.00

CFMVATL-3000-4160 ** 4160 3000 399 92 60 36 $37,475.00 $39,750.00

CFMVATL-HP-4160 ** 4160 >3000 >399

6900 V

V HP FLA



CFMVATL-1500-6900 ** 6900 1500 125 92 24 32 $18,175.00 $20,455.00

CFMVATL-2250-6900 ** 6900 2250 187 92 24 32 $18,985.00 $21,250.00

CFMVATL-4000-6900 ** 6900 4000 332 92 24 32 $19,500.00 $21,775.00

CFMVATL-HP-6900 ** 6900 >4000 >332


Consult factory


Full Voltage ATL Starters


3-24 benshaw.com


Main Lug OnlyMLO SeriesNEMA 1 / NEMA 12

Product Highlights:

Benshaw’s Main Lug Only (MLO) section provides a full height and depth NEMA rated enclosure for use as a convenient area to land the line or load cable connections while providing a transition area for a disconnect switch, starter or an MCC.

The MLO can be configured for top or bottom cable access (specify when ordering). Customized MLO sections are available—just contact Benshaw’s factory with your requirements.

Key Advantages:• Landing pad for input cable

• Optional feed through bus to Benshaw line up

• Top or bottom cable entry

• NEMA 1, 12 or 3R enclosure configurations

• Transition from other manufacturers’ line up (optional)

• Configure to match up to existing bus network (optional)

• Optional control transformers and metering can be added

Standard Features:• Landing pad for cabling

• NEMA 1/12 construction

• ANSI 61 grey

• 11 gauge steel construction

• Super durable polyurethane TGIC powder paint

• Tin plated copper bus

• Paint finish meets ASTM A252-9 or A525-83

• UL listed 5 kV Class

Options:• Bus entry, left or right


3-25

2300 V / NEMA 1/12/3R

Model Number DescriptionNEMA 1/12

List PriceNEMA 3R List Price

MV-MLO-18-800-2300* 800 Amp Pull Section 18" Wide Enclosure $7,350.00 $7,725.00






3300 V / NEMA 1/12/3R









Main Lug Only

4160 V / NEMA 1/12/3R









6900 V / NEMA 1/12/3R









*Complete model number by adding suffix to specify NEMA 1, 12 or 3R enclosure: -1, -12 or -3R.



3-26 benshaw.com

Product Highlights:

Benshaw’s free standing medium voltage load break interrupter switch is the latest design in medium voltage high current switching equipment for a wide range of applications. The fused interrupter switch provides an economical means of disconnect and short circuit protection of medium voltage loads such as transformers, single circuit or multi-circuit systems.

The switch is provided in a NEMA 12 rated enclosure configured for use as a standalone unit, in an equipment line-up or MCC.

Key Advantages:• Bolts directly to Benshaw MCC line-up or starter

• UL labeled up to 4800 volts

• Available in 400, 600 and 1200 amp ratings

• Available up to 6600 volts

• Class E fusing included

• Configurable with added options

• Load break rated

Standard Features:• Load break fault make

• 60 kV BIL up to 7.2 kV

• Symmetric fault ratings of 50 kA for 5 kV–7.2 kV and 45 kA for 2.4 kV

• NEMA 12 enclosure

• Viewing window to verify switch position

• Enclosure MV door interlocked with switch mechanism to prevent access while switch is on

• Operating mechanism lockable in the off position

• Load side grounding in off position

• Blown fuse indication

• Welded 11 gauge steel construction

• Enclosure finish meets ASTM A252-9 or A525-83, G-90 designation

• Line and load landing pads with NEMA bolt pattern

Options:• Lockable front panel

• Bus entry, left or right


Load Interrupter SwitchCFMVDISC Series


3-27

Load Interrupter SwitchCFMVDISC Series

2300 V

Description

Dimensions (in.)

List PriceModel Number H W D

CFMV-DISC-24-400-2300-12 * MV Disc Switch 400A 2300V Top Entry / Bottom Exit 92 24 30 $17,250.00

CFMV-DISC-36-600-2300-12 * MV Disc Switch 600A 2300V Bottom Entry / Top Exit 92 36 36 $25,955.00


3300 V

Description

Dimensions (in.)





4160 V

Description

Dimensions (in.)





6600 V

Description

Dimensions (in.)


CFMV-DISC-24-400-6600-12 ** MV Disc Switch 400A 6600V Top Entry / Bottom Exit 92 24 30 $18,250.00

CFMV-DISC-36-600-6600-12 ** MV Disc Switch 600A 6600V Bottom Entry / Top Exit 92 36 36 $33,500.00

CFMV-DISC-36-1200-6600-12 ** MV Disc Switch 1200A 6600V Bottom Entry / Top Exit 92 36 36 $41,650.00

See page 3-35 for available options. Options include horizontal bus, kirk key interlock and Main Lug Only (MLO) sections.

* For use on motor load Class R fuse will be provided and must be specified by customer.

** Non UL listed disconnect switch.



3-28 benshaw.com


Pilot DevicesPush-ButtonsOption Code Description List Price

A001 Raised Stop Push-Button - Red $100.00

A002 Flush Start Push-Button - Green $100.00

A003 Jog Push-Button - Yellow $100.00

A004 OL Reset Push-Button - (For External OL Relay) - Black $100.00

A005 Reset Push-Button - Black $100.00

A006 Raised Push-Button - Specify Color And Function $100.00

A007 Flush Push-Button - Specify Color And Function $100.00

A008 Mushroom Head Stop Push-Button - Red $150.00

A009 Illuminated Push-Button - Specify Color And Function $175.00

Pilot LightsOption Code Description List Price

A021 Red Run Light $125.00

A022 Green Stop Light $125.00

A023 Amber Fault Light $125.00

A024 Green Ready Light $125.00

A025 Amber Bypass Light $125.00

A026 Red Light - Specify Function $125.00

A027 Green Light - Specify Function $125.00

A028 Amber Light - Specify Function $125.00

A029 White Light - Specify Function $125.00

A030 Blue Light - Specify Function $125.00

A031 Push To Test Contact Assembly (Addition to Above) $200.00


3-29

Selector SwitchesOption Code Description List Price

A041 Hand - Off - Auto Selector Switch $175.00

A042 Local - Off - Remote Selector Switch $175.00

A043 Key-Operated Hand - Off - Auto Selector Switch $150.00

A044 Dual Ramps Selector Switch $150.00

A045 Two-Postion Selector Switch - Specify Function $200.00

A046 Three-Position Selector Switch - Specify Function $200.00

A047 Other Selector Switch - Specify Function and Type

Consult factory

MetersOption Code Description List Price

A061 Single-Phase Analog Ammeter - Includes CTs * $1,200.00

A062 Analog Ammeter with Three-Phase Selector Switch - Includes CTs * $1,500.00

A065 Elapsed Time Meter $250.00

A066 Operations Counter $250.00

A069 Other Power Metering - Specify Function

A075 Analog Voltmeter, Single Phase * $3,500.00

A076 Analog Voltmeter with Three-Phase Selector Switch * $3,750.00

A077 AC Wattmeter

A078 AC Watt Hour Meter

* Switchboard type

Consult factory

Pilot Devices


3-30 benshaw.com


Control OptionsMX3 OptionsOption Code Description List Price

A401 Door Mounted Communications Package - Includes Door Mounted Connector and RS232 / 485 Card $650.00

MXCOMPA343 Profibus Communications Bridge

MXCOMEA345 Ethernet Communications Bridge

MXCOMDA344 DeviceNet Communications Bridge

A405 Power Outage Ride-Thru - This Option Allows the Starter to Automatically Restart after a Power Loss of up to 30 Secs. Customer Must Supply Separate Source of Uninterrupted 120 V to the Starter

$500.00

A406 RTD Module - Unit Will Accept 8 Input RTDs. RTDs must be 100 ohm Platinum. (Available for Remote Mounting; Consult Factory for Details)

$3,000.00

A407 RTD Module - Unit Will Accept 16 Input RTDs. RTDs must be 100 ohm Platinum. (Available for Remote Mounting; Consult Factory for Details)

$5,000.00

A411 1000 VA UPS / 700 W for 120V Supply Instead of Customer Supplied for Option A405 Power Outage Ride-Thru

$3,000.00

Consult factory

Emergency Start OptionsOption Code Description List Price

A410 Emergency / Across the Line Bypass Option, Includes Start / Stop Push-Buttons, Overload Relay and Current Transformers and Selector Switch

$1,500.00

Consult factory

Control Power TransformersOption Code Description List Price

A105 500 VA Additional Control Power $725.00

A106 1000 VA Additional Control Power $850.00

A107 Specify Control Power Amount

A110 1500 VA Additional Control Power $2,000.00

A111 2500 VA Additional Control Power $2,500.00

Consult factory

General Purpose Control RelaysOption Code Description List Price

A121 Three-Pole Relay - Specify Function $225.00

A122 Four-Pole Relay - Specify Function $275.00

A123 Other Relays - Specify Function and Type

A124 On Delay Timer - Specify Function and Time $300.00

A125 Off Delay Timer - Specify Function and Time $300.00

A126 Other Timers - Specify Function and Time

A127 Ground Fault Relay - For Equipment Protection Only $1,500.00

Consult factory

TransducersOption Code Description List Price

A141 Transducer Output 0–5 VDC Based on Motor FLA $650.00

A142 Transducer Output 4–20 mA Based on Motor FLA $650.00

A145 Transducer Output 4–20 mA Based on Motor Voltage

Consult factory


3-31

Motor Protective RelaysThe following protective relays include the necessary current and potential transformers included. For optional zero sequence ground fault sensing, the appropriate current transformer should be added.

Protective RelaysOption Code Description List Price

A826 Multilin 369 with RTD, Metering and Communications Options

A827 Multilin 469

A829 Multilin PQM II with Analog Output Options

A830 Cutler Hammer MP4000

A831 Schweitzer SEL 710

A832 Schweitzer SEL 749M

A838 Other

Consult factory

Protective Relay OptionsOption Code Description List Price

A875 Ground Fault CT, 2000:1, 4.0:Dia. (For MX3 Use) $350.00

A876 Ground Fault CT, 2000:1, 8.13:Dia. (For MX3 Use) $1,000.00


3-32 benshaw.com


Enclosure and Bus OptionsEnclosure OptionsOption Code Description List Price

A171 Space Heater With Thermostat $450.00

A251 Door Interlock Switch $275.00

A252 Single Key Kirk Key Interlock $650.00

A255 Multiple Enclosure Mechanical Door Interlock

A256 Enclosure Upsizing - 24" W to 36" W $1,000.00

A257 Enclosure Upsizing - 36" W to 45" W $1,000.00

A258 Enclosure Upsizing - 32" D to 36" D $1,000.00

Consult factory

Bus Options*Option Code Description 0 to 1,500 HP 1,500 to 3,000 HP

8N 800 A Non-Insulated Bus $1,500 $1,750

8I 800 A Insulated Bus $2,150 $2,195

1N 1,200 A Non-Insulated Bus $1,750 $1,850

1I 1,200 A Insulated Bus $2,500 $2,555

2N 2,000 A Non-Insulated Bus $2,750 $2,795

2I 2,000 A Insulated Bus $3,795 $3,850

NR None Required $0 $0

+Bus not required for single stand-alone unit.

Bus is required for connection of 2 or more units.

Any unit with bus greater than 36” will require additional MLO section. Please contact the factory for pricing and delivery.

Bus Splice Options (must match bus option selected)Option Code Description List Price

8N 800 A Non-Insulated Bus Splice $395.00

8I 800 A Insulated Bus Splice $625.00

1N 1,200 A Non-Insulated Bus Splice $499.00

1I 1,200 A Insulated Bus Splice $725.00

2N 2,000 A Non-Insulated Bus Splice $850.00

2I 2,000 A Insulated Bus Splice $1,050.00

NR None Required $0


3-33

Power Factor Correction CapacitorsPower factor correction capacitors (PFCCs) are available in two options. 1. If the starter requires a UL label, the power factor capacitors are installed on the top of

the unit (capacitors are shipped loose and must be installed by customer) or in a separate enclosure to be installed next to the starter. The top mount will add approximately 28 inches to the enclosure height. Top mount is only available up through 225 kVAR, 4.8 kV. The separate enclosure (dimensions: 92"Hx30"Wx36"D) can house up to 2 PFCC units. For remote mount, contact factory.

2. For units not requiring UL approval, capacitors may be installed inside the enclosure. Both options require enclosure width to increase to the next standard size to accommodate the added contactor. Capacitors are three phase, supplied with three fuses, rated for 60 Hz operation.

PFCCs are available for voltages up through 13.8 kV.

Available Sizes:• 25 kVAR increments for 2.3 kV through 4.8 kV, starting at 25 kVAR

• 50 kVAR increments for 6 kV through 13.8 kV, starting at 50 kVAR

Consult factory for dimensions.

Information Required for Sizing (Note: Industry standard is to correct to a 0.95 PF.)

1. Motor HP: _____________________________

2. Voltage: _______________________________

3. Existing Power Factor: __________________

4. Corrected Power Factor: ________________


3-34 benshaw.com


Surge / Lightning ArrestorsThe surge or lightning arrestors are available in two options. If the unit is required to be UL approved, the surge arrestors must be installed on the top of the unit (components are shipped loose and must be installed by customer). This will add eighteen inches to the height of the enclosure. For units not requiring UL approval, the arrestors may be installed inside the enclosure. This requires the enclosure width to increase to the next standard size. Includes the hardware necessary to mount and wire the arrestors and the increased size of the enclosure where required.

Non-UL Labeled Starter Inside MountOption Code Description List Price

A901 Surge Arrestor, 2300 VAC $2,000.00







UL Labeled Starter Top Mount - 18" Height Adder (18"H x 30"W x 24"D top hat shipped loose)Option Code Description List Price









3-35

Surge capacitors will be supplied in a top hat package for starters that must maintain the UL label. This will add to the height of the enclosure (components are shipped loose and must be installed by customer). For non-UL units, the capacitors are packaged into the unit, which increases the width of the enclosure up to the next standard size.

Surge Capacitors

Non-UL Labeled Starter Inside MountOption Code Description List Price

A950 Surge Capacitor, 2300 VAC






A956 Surge Capacitor, 15 kV

Consult factory

UL Labeled Starter Top Mount - 18” Height Adder (18”H x 30”W x 24”D top hat shipped loose)Option Code Description List Price







A981 Surge Capacitor, 15 kV

Consult factory


3-36 benshaw.com


Line ReactorsFor 2.4 kV solid state starters, line reactors are not required.

For 5 kV / 7.2 kV solid state starters, line reactors are required when the supply source transformer is greater than 20 MVA (5% Impedance) or the motor lead wiring length is 1,000 feet or greater. For systems with custom motor control lineups and power factor correction capacitors, consult the factory.

For 13.8 kV starters, consult factory for the requirement of line reactors.

The line reactors are available in two options. If the unit is required to be UL approved, the reactors must be installed on the top of the unit (reactors are shipped loose and must be installed by customer). This will add to the height of the enclosure. For units not requiring UL approval, the reactors may be installed inside the enclosure. The inside mounting requires the enclosure width to increase to accommodate the added reactor. The price includes the hardware necessary to mount and wire the reactors and the increased size of the enclosure where required.

A de-tuning reactor may be required to protect the power system from the adverse interaction of capacitors and non-linear loads. To ensure the power factor correction device is properly applied, consult a qualified engineer or provide your single line electrical diagrams to Benshaw for evaluation.

4,160 V Starter Inside MountOption Code HP List Price

A985 750

A986 1500

A987 3000

A988 >3000

Consult factory

4,160 V UL Labeled Starter Top Mount

HP

Dimensions (in.)

Option Code H W D List Price

A991 750 22 22 24

A992 1500 23 24 24

A993 3000 23 24 24

A994 >3000

Consult factory on other voltage ratings in the 5 and 7.2 kV class.

Consult factory


3-37

DocumentationBenshaw offers a variety of documentation options to fit your project scope, budget and timeline. Only Benshaw offers the flexibility in our approval process to help meet our customers’ project schedules. All of our documentation packages are processed through our highly technical engineering department. Please contact Benshaw for pricing and delivery. Please ensure all documentation requirements are on the purchase order. Electronic copies are provided unless hard copies are specified on the purchase order.

Preliminary Drawings

Preliminary drawings consist of the “released to manufacturing” drawings that are used in production. This drawing package does not include any form of customer approvals. The drawing package includes the internal and external layout, and schematics.

Partial Approvals

Partial approval drawings allow Benshaw to purchase long-lead items that will not change prior to the customer’s approvals. This allows Benshaw to cut down on the delivery time while still allowing the customer all the flexibility and control in an approval process. The partial approval package includes the internal and external layout, and schematics.

Full Approvals

Full approval drawings ensure that no equipment will be purchased for the project until the customer’s approval for production is received. The full approval package includes the internal and external layout, and schematics.

Partial Submittals

Partial submittal packages allow Benshaw to purchase long-lead items that will not change prior to the customer’s approvals. This allows Benshaw to cut down on the delivery time while still allowing the customer all the flexibility and control in an approval process. The partial submittal package includes the internal and external layout, schematics and cut sheets for major components.

Full Submittals

Full submittal packages ensure that no equipment will be purchased for the project until the customer’s approval for production is received. The full submittal package includes the internal and external layout, schematics and cut sheets for major components.

As-Built Drawings

As-built drawings are typically sent out two weeks after shipment and incorporate all the changes that occur during the production process, testing and FAT test (if applicable).

O&M Manuals

O&M manuals are typically sent out four weeks after delivery. O&M manuals also include as-built drawings.

Witness Testing (FAT Testing)

Witness testing includes a testing plan and procedure that must be reviewed and approved in advance by the customer. Quotations are for standard Benshaw testing, and any special testing needs or requirements must to be brought up to Benshaw to ensure accurate scheduling. Witness testing can occur starting the week after the equipment is ready to ship, adding to the delivery time frame, and must be scheduled beforehand.


3-38 benshaw.com


Wound Rotor StartersProduct Highlights:

Wound rotor motors are typically used in applications requiring high starting torques, a limited number of operating speeds or a stepped acceleration to achieve a soft start. Typical existing applications utilize an electromechanical starter on the stator and introduce multiple stages of resistance in the rotor via contactor arrangements to achieve a soft ramp.

With the RediStart MX3, wound rotor control is greatly simplified. The RediStart consists of two major sections: 1) A solid-state stator control, and 2) secondary resistors into the rotor circuit from a separate 3-phase resistor bank. This achieves the high torque required by the application—with low inrush—while providing a smooth stepless start. This greatly reduces the maintenance cost of the typical electromechanical control.

Single Step Rotor Control: The solid-state starter is wired to the motor stator circuit, and the resistor and shorting contactor are wired to the motor rotor circuit. The solid state starter accelerates the motor to slip speed (determined by the resistance value) and then activates the contactor to short the rotor. This allows the motor to accelerate to full speed.

Multiple Step Rotor Circuit: WR RVSS series starters can be supplied with multiple stages of rotor resistor and contactor combinations. This arrangement may be necessary for multiple step starting of extremely high inertia loads, or for continuous operation at multiple speeds. Multiple steps of rotor resistance can be coordinated to achieve this.

Variable Speed Control: Variable speed control of wound rotor motors can be accomplished with the RediStart series control. By maintaining full output voltage of the control going to the stator of the wound rotor motor, and varying the resistance in the rotor, variable speed is accomplished.

Resistors must be rated for continuous duty operations. Variable loads (pumps and fans) only.

Key Advantages:

RATINGS

Horsepower:

1,000–10,000 HP*

Overload:

500% for 30 seconds 125% continuous

Starting Torque:

0–100%

Voltage:

2.4, 3.3, 4.1 and 6.6 kV**

Typical Resistance Steps:

1–2

* Consult factory for higher HP rating.

** Consult factory for higher voltage rating.

• Benshaw MX3 technology

• Single step rotor control

• Modular power stack design for ease of maintenance

• Integral bypass contactor design

• Advanced MX3 motor protection

• Advanced MX3 metering function

• Real time clock

• 99 event log history

• Modbus capable

• Configurable output relays

• Multistep & variable speed rotor control available

• Reduced maintenance

• Reduced in size and number of resistors needed

• Stepless control

• Reduces inrush while maintaining torque


3-39

Wound Rotor Motor Starter Check ListPresent starting method

Across the line Other ___________________________________

Rotor circuit information

Present number of steps of resistance ____________

Total starting ohm value ____________ ohms

Current method of resistance shorting

Step one ____________ sec. Step two _________ sec. Step three______ sec. Step four _____ sec. Step five ____ sec.

The present number of steps may be more or less than listed above. Please specify.

Motor information

Primary voltage______________

Secondary voltage_______________

Primary amps________________

Secondary amps_________________

RPM ________________ Service Factor________________

Size of utility supply transformer_____________________kVA

Present time to accelerate to full speed approximate______________sec.

Starts required per hour_________________


3-40 benshaw.com


Synchronous StartersSEP Series

RATINGS

Horsepower:

1,000–10,000 HP*

Overload:


Starting Torque:

0–100%

Voltage:

2.4, 3.3, 4.1 and 6.6 kV**

Exciter Ratings:

125–250 VDC 30–120 A***

* Consult factory for higher HP rating.

** Consult factory for higher voltage rating.

*** Consult factory for higher amp rating.

Product Highlights:

The sync motor functions as an induction motor during start up. Once the motor approaches full synchronous speed, the Redistart DC exciter induces a constant polarity to the rotor causing the motor to lock into sync. Because the rotor’s field is constant and separately excited there is no slip required to produce torque, as with an induction motor. This allows the motor to run at synchronous speed.

The Benshaw synchronous package consists of a solid state starter portion connected to the stator and an SEP (synchronous excitation package) that is connected to the rotor section in conjunction with a discharge resistor. This SEP is supplied for brush type and brushless exciters.

Synchronous Benefits:

The RediStart series solid state starter provides reduced voltage stepless acceleration and automatic synchronization of three phase AC synchronous motors. Synchronous motors are utilized for a number of reasons. They are used in applications that require precise motor speed, they are used to obtain greater efficiencies, and they are used for facility power factor correction.

Since synchronous motors can be operated at leading power factor, they are used to correct a facility’s lagging power factor created by all the other induction motors being operated.

This correction reduces the penalty a customer pays the utility company for creating poor power factor.

Key Advantages:

• Benshaw synchronous technology

• Solid state synchronous rotor control



• Advanced synchronous motor protection

• Can be added to existing equipment

• Can be supplied with MX2 or MX3 starter control

• Modbus communication



• Reduction in size compared to existing field control



• Brush type and brushless control


3-41

Synchronous Motor Starter Check ListPresent starting method

Across the line Other ______________________ Application _______________________

Field discharge resistor value____________ohms

Motor information

Motor horsepower__________ Motor frequency ________Hz

Field voltage_______________ Max field current __________

Full load current____________ Motor LRA________________ Motor voltage________

RPM______________________ Service Factor_____________

Motor Wk2 ________________ Load Wk2_________________ Motor Speed ____RPM




Brushless exciter Brush Type exciter

Options : Circuit Breaker Fusible Switch No disconnect needed

Bypass contactor run duty only

120 VAC control power by Benshaw

Start Stop Pushbutton

Hand Off Auto Local Off Remote 2-Wire Control 3-Wire Control


3-42 benshaw.com

Benshaw can custom configure intelligent, MX3 based motor starters, complete control centers and lineups to meet the needs of any load, in any industry.

Incoming Sections:• Main breakers or disconnects

• Main-Tie-Main arrangements

• Main lug only sections

• 1200 / 2000 / 3000 amp circuit breakers

• 400 / 600 / 1200 amp load break fault make disconnects

• Surge protection devices

• Metering and communications

Custom Configured Multiple Unit MCC Lineups:

• Transition sections to third party equipment

• 800 / 1200 / 2000 / 3000 amp horizontal bus

• Reduced voltage / full voltage / feeder controls

• Back to back construction

Intelligent MCC Integration:• Easy MCC networking

• MTMS, disconnects, feeders, SSRV, ATL, PAM, 2 speed starters

• Diagnostics and communications

• Intelligent SSRVS power poles

MX3 intelligent motor control centers,

ligent, MX3 based motor starters, complete the needs of any load, in any industry.

Configured Multiple C Lineups:tion sections to party equipment

1200 / 2000 / 3000 ampontal bus

ced voltage / full voltage / r controls

to back construction

Intelligent MCC Integration:• Easy MCC networking

• MTMS, disconnects, feeders, SSRV, ATL, PAM, 2 speed starters

• Diagnostics and communications

• Intelligent SSRVS power poles


3-43

lineups, and main-tie-main arrangements

Integrated Supervisory Control and Predictive Maintenance Systems:

In applications requiring the coordination and control of multiple RediStart™ starters and third party equipment, Benshaw has the experience and technology to design and deliver integrated control systems:

• PC-based systems

• Local area networks

• Local / remote communications and control

• Data collection and monitoring

• PLC design, programming and integration

• Online and offline predictive maintenance

Packaged Electrical and Control Systems

Benshaw can also design and manufacture completely packaged portable or stationary electrical systems for applications requiring self-contained modules, including:

• 20- or 40-foot containers

• Self-contained air conditioning and lighting

• Low and medium voltage equipment

• Remote monitoring and control

• Personnel and support facilities

Fixed Mount Circuit Breaker MTM

(only 48" deep)

Fused Disconnect MTM 7.2 kV motor control center with integrated power factor correction

48" space savings vs. typical 96"

competitive unit

ngs " nit

Draw Out Circuit Breaker MTM with (6) 5 kV solid state starters


3-44 benshaw.com

Mission critical reliability in any configuration

When it absolutely has to work, it absolutely has to be Benshaw.

Industry Experience:• Aggregate and mining

• Cement production

• Chemical processing

• Municipal fresh and waste water treatment

• Oil and gas production

• Power generation

• Pulp and paper production

• Steel and aluminum

Application Experience:• Ball / hammer / rolling mills

• Centrifuges

• Chillers

• Compressors

• Conveyors

• Crushers / hydra pulpers

• Fans and blowers

• Mixers and refiners

• Pumps

Fixed-mount circuit breaker MTM

Upright skid mounted

Low profile skid mounted

Protective relays and PLC logic

20 MW, 13.8 kV

Motor control center with power factor correction

3-44 benshaw.com Return to the Table of Contents

4-1

Low Voltage Starters

Standard Low Voltage Starter Products

Intelligent Motor Control ...................4-2

Open Chassis Solid State Starters ...... 4-7

Prepackaged Starters with ATL Bypass ...............................4-16

Prepackaged Starters .......................4-18

Engineered Low Voltage Starter Products

Wound Rotor Starters.......................4-24

Wound Rotor Motor Starter Check List .........................................4-25

Synchronous Starters ........................4-26

Synchronous Motor Starter Check List ......................................... 4-27

Solid State Starters with Reversing Control .....................4-28

Solid State Starters with Two Speed Control ...................4-29

Solid State Starters Part Number Assembler ...................4-30


4-2 benshaw.com

MX3 Controller

Product Highlights:

Next generation MX3 technology forms the backbone of Benshaw’s entire line of intelligent medium voltage motor controls. With fiber optic firing, enhanced programming capabilities, ease of use and a unique, flexible architecture, Benshaw’s MX3 controller delivers unprecedented functionality and all of the rugged, dependable performance you’ve come to expect from the world leader in solid state motor controls and drives.

MX3 controllers, power components, software and sensors are all designed, built and tested to perform as an integrated control system, eliminating the coordination and performance problems inherent in other forms of reduced voltage starting.

With more built-in features, more configurable options, greater expandability and a broader communications capability than any other motor control on the market, Benshaw’s next generation MX3 technology will shorten your commissioning times, improve motor performance and protection, enhance diagnostic capability and streamline many electrical system monitoring and maintenance tasks.

Key Features:• High performance motor control with multiple starting modes built-in

• Patented CYCLO Converter control from 1 to 40% speed



• Line and motor metering

• Diagnostic capabilities with event log and real-time clock

• UL, CUL, NEC, NEMA compliance

• Built-in remote self-testing (BIST)

• Expanded communications capabilities

• Intelligent SCR power poles

• Intelligent MV MCC integration


Intelligent Motor Control

ne of intelligent medium voltage motor controls. With fiber optic firing, enhanced programming capabilities, ease of use and a unique, flexible architecture, Benshaw’s MX3 controller delivers unprecedented functionality and all of the rugged, dependableperformance you’ve come to expect from the world leader in solid state motor controls and drives.

MX3 controllers power components software and sensors are all designed built

Product Highlights:

Next generation MX3 technology forms the backbone of Benshaw’s entire liof intelligent medium voltage motor controls With fiber optic firing enhanc

Keypad (Included)

Optional RTD ModulesOptional RTD Modules

Fiber Optic Firing• Integrated technology

• Noise immunity

• High voltage isolation

• Safe, reliable SCR control


4-3

Control Features


• Current ramp




• Torque ramp (TruTorque™)




• Power ramp





• CYCLO converter control







• Phase reversal

• Phase loss


• Overcurrent

• Undercurrent



• Shorted or open SCR





• Motor PTC input

• RTD modules


– 3% out-of-box


• Average current

• L1 current

• L2 current

• L3 current



• Average volts




• Overload %

• Power factor

• Watts

• VA

• VARS

• KW hours

• MW hours

• Phase order

• Line frequency

• Analog input

• Analog output



• # of starts

• TruTorque™ %

• Power %




• Real-time clock


• Stop

• Fault

• Fault reset


• OL reset


• Heater enable

• Heater disable



• Disconnect

• Slow speed

• Brake enable

• Brake disable


• Faulted

• Running

• Up to speed

• Alarm condition

• Ready condition

• Locked out

• Over current

• Under current

• OL alarm

• Shunt trip

• Ground fault



• Slow speed forward / reverse

• DC braking

• Cooling fan


• Trip high level

• Trip low level


• Current (0 – 200%/0 – 800%)

• Voltage (0 – 150%)

• OL (0 – 150%)

• kW (0 – 10 kW/0 – 100 kW)

• MW (0 – 1 Mw)


• Firing (0 – 100%)

• Calibration










• MV BIST test (built-in self test)



4-4 benshaw.com


Intelligent Motor ControlMX2 Controller

MX2 Board

Product Highlights:

The new MX2 control technology from Benshaw provides a powerful, flexible, intelligent low voltage motor control platform. MX2-based controls offer multiple, user selectable starting modes, an increased selection of configurable digital and analog I/Os, comprehensive built-in metering capabilities, unprecedented onboard protection and an easy to use, intuitive user interface.

The new control board terminal configuration—coupled with programmable burden CT settings—makes Benshaw’s MX2 technology an excellent choice for a wide range of intelligent, soft start motor control applications.

With more built-in starting modes, more built-in protection features, additional communications capabilities, improved noise immunity, a more complete user I/O and CE compliance, Benshaw’s new MX2-based low voltage motor controls raise the bar for intelligent, low-cost, soft start motor control.

When you factor in our 24/7 comprehensive technical support, we think you’ll find Benshaw’s MX2-based controls to be an excellent value.

Standard Features:

• High performance motor control with multiple starting modes built in

• Jogging 7% and 14% speed

• 3 user configurable digital inputs

• 2 fixed inputs for start and bypass confirm

• 3 user configurable output relays and 1 fixed bypass confirm

• User configurable analog I/O

• Programmable burden CT settings

• Residual ground fault

• Advanced line / motor metering

• DC braking light duty

• Power stack thermistor

• Data snapshot of each fault

• Power up on start

• 1000V capable

• Energy saver

• Remote keypad ready

• CE, UL, CUL, NEMA compliance

• Built-in self-testing (BIST)

• ModBus 485 plus expanded communications capabilities with optional bridges

Keypad


4-5

Control Features


• Current ramp




• Torque ramp (TrueTorque™)




• Power ramp





• Jogging 7% and 14% speed







• Phase reversal

• Phase loss


• Overcurrent

• Undercurrent


• Ground fault residual

• Shorted SCR





Metering:• +/- 2% accuracy

• Average current

• L1 current

• L2 current

• L3 current


• Ground fault amps/residual

• Average volts




• Overload %

• Power factor

• Watts

• VA

• VARS

• KW hours

• MW hours

• Phase order

• Line frequency

• Analog input

• Analog output



• # of starts

• TruTorque™ %

• Power %




• Stop

• Fault

• Fault reset

• Bypass / confirmation & inline

• OL reset


• Heater enable

• Heater disable



• 1 dedicated bypass


• Starter off

• Faulted fail safe and non fail safe

• Running

• Up to speed

• Alarm condition

• Ready condition

• Locked out

• Over current trip

• Under current trip

• OL alarm

• Shunt trip fail safe and non fail safe

• Ground fault



• Slow speed forward / reverse

• DC braking

• Cooling fan

• 1 fixed bypass


• Trip high level

• Trip low level


• Current (0 – 200%/0 – 800%)

• Voltage (0 – 150%)

• OL (0 – 150%)

• kW (0 – 10 kW/0 – 100 kW)

• MW (0 – 1 MW)


• Firing (0 – 100%)

• Calibration

User Interface:• Standard board-mounted

LED interface

• Optional remote mount LCD display


– View status information

– View line current, voltage and frequency in real time






• LV BIST test (built-in self test)



4-6 benshaw.com


Intelligent Motor ControlMX3 / MX2 ControllersControl Feature Comparison

MX2 MX3

Miscellaneous

Voltage Ramp

Current Ramp

TruTorque™ Ramp

Power Ramp

Tach / Speed Control Ramp

Linear Ramp Profiles

Squared and S Ramp Profiles

Dual Ramps

Kicking

Voltage Decel

TruTorque™ Decel

DC Braking

Heater / Antiwindmill

Jogging 7–14% Speed

Slow Speed Cyclo™ Operation

0–40% speed

Inside Delta

Wye-Delta/ Electromechanical Control

Phase Controller

Current Follower

ATL

Protection

Separate Starting / Running

Overload Classes

Adj. Hot / Cold Ratio

Adj. Cooling Time

Intelligent Start Lockout

Adj. OL Lockout Level

Over / Under Current Protection

Retained OL When Power Lost

Current Imbalance Protection

IOC (Instantaneous Over Current)

Open / Shorted SCR Detection

Overcurrent / Shear Pin

Undercurrent / Load Loss

Residual Ground Fault Protection

MX2 MX3

Protection (continued)

Zero Seq. Ground Fault Protection

Starts Per Hour

RTD Monitoring

Motor PTC

Stack OT Switch

Stack Thermistor Input

Backspin Timer

Time Between Starts

Phase Rotation

Overvoltage

Undervoltage

Phase Loss

UTS / Stall Timer

Zero Speed Switch

PF Trip

PORT (Power Outage Ride Through)

Keypad Fault Reset

Adj. Auto Fault Reset Timer

Adj. No. of Auto Resets Before Lockout

Decel After Fault

Fault Log

Time and Date Stamp

9 Data Snapshots of Each Fault

Event Log (last 99 events)

Fault Classes

User I/O

Programmable Digital Inputs

Programmable Digital Outputs

User Analog Input

Programmable User Analog Output

Local / Remote Source Input

Power Up Start

MX2 MX3

Metering

Full Voltage and Current Metering

True RMS Calculation

Factory Menu Calibration

Current Imbalance Meter

Ground Fault Meter

Watt Meters

KVA Meters

VAR Meter

Watt Hour Meters

Line Frequency Meter

Power Factor Meter

% OL Meter

Time Until OL Lockout Release Meter

Phase Rotation Meter

& Power and % TruTorque™ Meter

Run Time Meter

Number of Starts Meter

Peak Current of Last Start Meter

Last Starting Time Meter

Analog Input Meter

Real Time Clock

RTD Meters

Miscellaneous

LV BIST

MV BIST

LV Powered BIST


4-7

RB Series MX3 or MX2 TechnologyWith Integral Bypass

Product Highlights:

Benshaw’s RB series solid state starter combines the high performance MX2 or MX3 technology with a rugged, compact, integral bypass RB series power section.

The MX2 or MX3 technology provides users with a powerful group of programming parameters, designed for flexibility in across a wide range of industrial applications. Both MX2 and MX3 controls provide simple setup and commissioning via the Quick Start Menu.

The RB power section is a rugged, heavy duty solid state starter section designed with integral bypass contactors for a compact, efficient profile. The modular design includes separate poles for each phase for ease of maintenance.

Key Advantages:

NEMA 2-Hole Pattern (Top Entry / Top Exit)

DV / DT ProtectionSCRs in Reverse Parallel Configuration

NEMA 2-Hole Pattern (Bottom Entry / Bottom Exit)

Stack Over-Temperature Protection

Integral Bypass Contactor

RB Power Pole — 180A

Open Chassis Solid State Starters

• Small, compact design

• Modular power stack assembly for ease of maintenance

• ModBus standard / other Fieldbus optional

• Multiple starting ramps for various applications

• Integrated metering system diagnostics

• Integral bypass contactors for efficient operation, eliminating the need for external fans


• Dual ramp capability for loaded / unloaded applications

• Power stack has multiple ratings for application flexibility


4-8 benshaw.com

RB Series MX3 or MX2 TechnologyProduct Selection Guide

Horsepower

Model Number 208 V 240 V 480 V 575 V

Standard Duty — 350% for 30 Sec. 115% Continuous

RB2-1-S-027A-11C 7.5 10 20 25

RB2-1-S-040A-11C 10 15 30 40

RB2-1-S-052A-12C 15 20 40 50

RB2-1-S-065A-12C 20 25 50 60

RB2-1-S-077A-13C 25 30 60 75

RB2-1-S-096A-13C 30 40 75 100

RB2-1-S-125A-14C 40 50 100 125

RB2-1-S-156A-14C 50 60 125 150

RB2-1-S-180A-14C 60 75 150 200

RB2-1-S-240A-15C 75 100 200 250

RB2-1-S-302A-15C 100 125 250 300

RB2-1-S-361A-16C 125 150 300 400

RB2-1-S-414A-17C 150 - 350 -

RB2-1-S-477A-17C - 200 400 500

RB2-1-S-515A-17C 200 - 450 -

RB2-1-S-590A-18C - 250 500 600

RB2-1-S-720A-19C 250 300 600 700

RB2-1-S-838A-20C 300 350 700 800

Heavy Duty — 500% for 30 Sec. 125% Continuous

RB2-1-S-027A-11C 7.5 10 20 25

RB2-1-S-040A-11C 10 15 30 40

RB2-1-S-052A-12C 15 20 40 50

RB2-1-S-096A-13C 30 40 75 100

RB2-1-S-156A-14C 40 50 100 125

RB2-1-S-180A-15C 60 75 150 200

RB2-1-S-361A-16C 75 100 200 250

RB2-1-S-414A-17C 125 150 300 400

RB2-1-S-590A-18C 200 200 450 500

RB2-1-S-720A-19C - 250 500 600

Severe Duty — 600% for 30 Sec. 125% Continuous

RB2-1-S-027A-11C 5 7.5 15 20

RB2-1-S-040A-11C 10 10 30 40

RB2-1-S-052A-11C - 15 - -

RB2-1-S-096A-13C 25 30 60 75

RB2-1-S-180A-14C 30 40 75 100

RB2-1-S-180A-15C 50 60 125 150

RB2-1-S-361A-16C 60 75 150 200

RB2-1-S-414A-17C 100 125 250 300

RB2-1-S-590A-18C 150 200 450 500




4-9

RB2 Series with MX2 TechnologyStandard Duty / 200–600 Volt

350% for 30 Sec. / 115% Continuous Rated

A

Horsepower Dimensions (in.)

Model Number 208 V 240 V 480 V 575 V H W DWeight

(lbs.) List Price

RB2-1-S-027A-11C 27 7.5 10 20 25 14 10 6.9 14 $1,745.00

RB2-1-S-040A-11C 40 10 15 30 40 14 10 6.9 14 $1,825.00

RB2-1-S-052A-12C 52 15 20 40 50 14 10 8.4 17 $1,900.00

RB2-1-S-065A-12C 65 20 25 50 60 14 10 8.4 17 $1,935.00

RB2-1-S-077A-13C 77 25 30 60 75 15 10 8.4 17 $2,045.00

RB2-1-S-096A-13C 96 30 40 75 100 15 10 8.4 18 $2,665.00

RB2-1-S-125A-14C 125 40 50 100 125 21.7 12.3 8.9 43 $2,935.00

RB2-1-S-156A-14C 156 50 60 125 150 21.4 14 9 43 $3,500.00

RB2-1-S-180A-14C 180 60 75 150 200 21.4 14 9 43 $4,265.00

RB2-1-S-240A-15C 240 75 100 200 250 23.8 12.5 10.3 51 $4,550.00

RB2-1-S-302A-15C 302 100 125 250 300 23.8 12.5 10.3 51 $5,000.00

RB2-1-S-361A-16C 361 125 150 300 400 23.9 13.3 9.2 56 $5,855.00

RB2-1-S-414A-17C 414 150 - 350 - 27.9 18 11.1 151 $6,385.00

RB2-1-S-477A-17C 477 - 200 400 500 28.9 18 11.1 155 $7,000.00

RB2-1-S-515A-17C 515 200 - 450 - 28.9 18 11.1 155 $7,500.00

RB2-1-S-590A-18C 590 - 250 500 600 28.8 18 11.1 159 $8,000.00

RB2-1-S-720A-19C 720 250 300 600 700 30.7 18.5 10.9 159 $9,000.00

RB2-1-S-838A-20C 838 300 350 700 800 29.1 26.1 12.5 160 $10,500.00

Web stocked


Unit requires separate 120 V control power. Unit includes standard board-mounted LED interface. The optional LCD interface is shown. The keypad is shipped loose.


Model Number Description List Price

KPMX3CBL2M NEMA 12 / 3R Remote Keypad with 2 Meter Cable

$425.00


4-10 benshaw.com

RB3 Series with MX3 TechnologyStandard Duty / 200–600 Volt


A



(lbs.) List Price

RB3-1-S-027A-11C 27 7.5 10 20 25 14 10 7.7 14 $2,595.00

RB3-1-S-040A-11C 40 10 15 30 40 14 10 8.4 14 $2,625.00

RB3-1-S-052A-12C 52 15 20 40 50 14 10 9.2 17 $2,735.00

RB3-1-S-065A-12C 65 20 25 50 60 15 10 9.2 17 $2,750.00

RB3-1-S-077A-13C 77 25 30 60 75 15 10 9.2 17 $3,055.00

RB3-1-S-096A-13C 96 30 40 75 100 15 10 9.2 18 $3,575.00

RB3-1-S-125A-14C 125 40 50 100 125 21.5 12.3 9.7 43 $3,825.00

RB3-1-S-156A-14C 156 50 60 125 150 21.7 14 9.8 43 $4,345.00

RB3-1-S-180A-14C 180 60 75 150 200 21.7 14 9.8 43 $5,000.00

RB3-1-S-240A-15C 240 75 100 200 250 23.8 12.5 11.1 51 $5,250.00

RB3-1-S-302A-15C 302 100 125 250 300 23.8 12.5 11.1 51 $5,725.00

RB3-1-S-361A-16C 361 125 150 300 400 23.9 13.4 10 56 $6,455.00

RB3-1-S-414A-17C 414 150 - 350 - 27.9 18 11.9 151 $6,950.00

RB3-1-S-477A-17C 477 - 200 400 500 28.9 18 11.9 155 $7,500.00

RB3-1-S-515A-17C 515 200 - 450 - 28.9 18 11.9 155 $8,000.00

RB3-1-S-590A-18C 590 - 250 500 600 28.9 18 11.9 159 $8,700.00

RB3-1-S-720A-19C 720 250 300 600 700 30.7 18 11.7 159 $9,500.00

RB3-1-S-838A-20C 838 300 350 700 800 29.1 26.1 13.3 160 $11,000.00

Built-to-order: Please allow 2 weeks for shipment.

Unit requires separate 120 V control power. Unit includes remote mountable LCD keypad (KPMX3CBL2M) with 2 meter cable. Please order part number, KPMX3CBL2M, with chassis, see page 4-9. The keypad is shipped loose.




4-11

RB2 Series with MX2 TechnologyHeavy Duty / 200–600 Volt


A

Horsepower Weight (lbs.) List PriceModel Number 208 V 240 V 480 V 575 V

RB2-1-S-027A-11C 24 7.5 10 20 25 14 $1,745.00

RB2-1-S-040A-11C 40 10 15 30 40 14 $1,825.00

RB2-1-S-052A-12C 52 15 20 40 50 17 $1,900.00

RB2-1-S-096A-13C 96 30 40 75 100 18 $2,665.00

RB2-1-S-156A-14C 125 40 50 100 125 43 $4,635.00

RB2-1-S-180A-15C 204 60 75 150 200 43 $5,975.00

RB2-1-S-361A-16C 252 75 100 200 250 56 $6,500.00

RB2-1-S-414A-17C 372 125 150 300 400 151 $8,525.00

RB2-1-S-590A-18C 551 200 200 450 500 159 $9,795.00

RB2-1-S-720A-19C 623 - 250 500 600 160 $9,795.00

Web stocked





4-12 benshaw.com

RB3 Series with MX3 TechnologyHeavy Duty / 200–600 Volt


A



(lbs.) List Price

RB3-1-S-027A-11C 24 7.5 10 20 25 14 10 7.7 14 $2,595.00

RB3-1-S-040A-11C 40 10 15 30 40 14 10 8.4 14 $2,625.00

RB3-1-S-052A-12C 52 15 20 40 50 14 10 9.2 17 $2,735.00

RB3-1-S-096A-13C 96 30 40 75 100 15 10 9.2 18 $3,575.00

RB3-1-S-125A-14C 125 40 50 100 125 21.5 12.3 9.7 43 $5,365.00

RB3-1-S-180A-15C 204 60 75 150 200 21.5 14.3 9.8 43 $6,585.00

RB3-1-S-361A-16C 252 75 100 200 250 23.9 13.4 10 56 $7,075.00

RB3-1-S-414A-17C 372 125 150 300 400 27.9 18 11.9 151 $8,900.00

RB3-1-S-590A-18C 551 200 200 450 500 28.9 18 11.9 159 $10,055.00

RB3-1-S-720A-19C 623 - 250 500 600 30.7 18 11.7 160 $10,055.00

Please allow 2 week lead time.





4-13

RC Series With MX3 or MX2 TechnologyNon-Bypassed / Continuous Duty, 1–1586 Amp / 600 VAC

Product Highlights:

The RC Series Solid State Starter combines the high performance MX2 or MX3 control with the rugged, continuous duty, fan cooled RC stack.

The MX2 or MX3 series control provides users with a powerful group of programming parameters, designed for flexibility in industrial applications. The MX2 and MX3 both provide simple setup and commissioning via the Quick Start Menu.

The RC power section is a rugged non-bypassed section. It is an economical solution at low horsepower. In addition, the fan cooled stack provides high duty cycle and high inertia starting and energy saver operation.

Key Advantages:


• Economical at low horsepower

• High duty cycle starting

• Long starting times

• Suitable for jogging applications

• Fan cooled stack


• Modbus standard / Profibus, Ethernet, DeviceNet, Ethernet IP web addressable communication protocols are available via optional communication bridges

• 1.25 service factor

• Integrated metering and diagnostics

• Multiple starting ramps for various applications


4-14 benshaw.com

RC2 Series with MX2 TechnologyNon-Bypassed /Continuous Duty, 1–1586 Amp / 600 VAC

500% Current for 30 Sec. / 125% Continuous Rated

A



(lbs.) List Price

RC2-0-S-027A-31C 27 7.5 10 20 25 14 9.9 7.9 15 $1,700.00

RC2-0-S-040A-31C 40 10 15 30 40 14 9.9 7.9 15 $1,835.00

RC2-0-S-052A-31C 52 15 20 40 50 14 9.9 7.9 18 $1,965.00

RC2-0-S-065A-32C 65 20 25 50 60 18 10 9.6 18 $2,085.00

RC2-0-S-077A-32C 77 25 30 60 75 18 10 9.6 18 $2,125.00

RC2-0-S-096A-33C 96 30 - 75 100 27 10 9.6 19 $2,165.00

RC2-0-S-125A-33C 125 40 50 100 125 27 10 9.6 45 $3,225.00

RC2-0-S-156A-34C 156 50 60 125 150 24 22 10.1 45 $3,335.00

RC2-0-S-180A-34C 180 60 75 150 200 24 22 10.1 45 $3,335.00

RC2-0-S-240A-35C 240 75 100 200 250 26 22 10.1 55 $3,950.00

RC2-0-S-302A-35C 302 100 125 250 300 26 22 10.1 55 $4,315.00

RC2-0-S-361A-35C 361 125 150 300 400 26 22 10.1 60 $4,545.00

RC2-0-S-414A-35C 414 150 - 350 - 26 22 10.1 150 $5,395.00

RC2-0-S-477A-35C 477 - 200 400 500 26 22 10.1 150 $6,215.00

RC2-0-S-515A-36C 515 200 - 450 - 36.8 29 10.7 150 $7,025.00

RC2-0-S-590A-36C 590 - 250 500 600 36.8 29 10.7 160 $7,900.00






4-15

RC3 Series with MX3 TechnologyNon-Bypassed /Continuous Duty, 1–1586 AMP / 600 VAC

500% Current for 30 Sec. / 125% Continuous Rated

A



(lbs.) List Price

RC3-0-S-027A-31C 27 7.5 10 20 25 14 9.9 8.7 15 $2,045.00

RC3-0-S-040A-31C 40 10 15 30 40 14 9.9 8.7 15 $2,175.00

RC3-0-S-052A-31C 52 15 20 40 50 14 9.9 8.7 18 $2,645.00

RC3-0-S-065A-32C 65 20 25 50 60 18 10 10.4 18 $2,735.00

RC3-0-S-077A-32C 77 25 30 60 75 18 10 10.4 18 $2,850.00

RC3-0-S-096A-33C 96 30 - 75 100 27 10 10.4 19 $3,325.00

RC3-0-S-125A-33C 125 40 50 100 125 27 10 10.4 45 $4,385.00

RC3-0-S-156A-34C 156 50 60 125 150 24 22 10.9 45 $4,495.00

RC3-0-S-180A-34C 180 60 75 150 200 24 22 10.9 45 $4,600.00

RC3-0-S-240A-35C 240 75 100 200 250 26 22 10.9 55 $5,100.00

RC3-0-S-302A-35C 302 100 125 250 300 26 22 10.9 55 $5,475.00

RC3-0-S-361A-35C 361 125 150 300 400 26 22 10.9 60 $5,695.00

RC3-0-S-414A-35C 414 150 - 350 - 26 22 10.9 150 $6,555.00

RC3-0-S-477A-35C 477 - 200 400 500 26 22 10.9 150 $7,375.00

RC3-0-S-515A-36C 515 200 - 450 - 36.8 29 11.5 150 $8,195.00

RC3-0-S-590A-36C 590 - 250 500 600 36.8 29 11.5 160 $9,065.00





4-16 benshaw.com


Prepackaged Starters with ATL BypassRX Series with MX3 or MX2 Technology

Severe Duty 480 V / NEMA 12 or 3R / Combination / Dual Redundant Starting

Product Highlights:

RX2E starters provide solid state reduced voltage starting for normal operation and full voltage emergency backup starting with complete electronic motor protection at the flip of a switch. This unique redundant design is the ideal solution for critical applications where downtime is extremely disruptive to production operations and cannot be tolerated. Benshaw’s MX solid state controls provide precise digital starting and stopping, motor protection, metering, diagnostics and communications.

Units are stocked with MX2 technology, but are available with MX3 technology.

Standard Features:• NEMA 12, redundant, combination / circuit breaker

• Shunt trip on main circuit breaker

• 500% – 30 seconds rated solid state starter, UL certified and listed

• 1800 PIV rated SCRs, UL certified and listed

• 125% continuous duty rated solid state starter, UL certified and listed

• Selector switch for selecting solid state or full voltage operation mounted inside enclosure

• Full HP rated bypass contactor with a 1.15 service factor, wired for normal bypass operation and full voltage start and run operation, with normally open auxiliary contact

• Separately mounted "SPE" series overload relay wired for full voltage start and run operation

• 110 volt control power transformer with primary and secondary fuses

• Door mounted start and stop push-buttons

• Door mounted keypad

• Door mounted run indicating light

• Door mounted local-off remote switch

• Door mounted overload reset

• Benshaw soft start and emergency bypass control board with customer connections

• Auxiliary relay with (2) Form C run contacts

• Benshaw MX2 programmable motor controller with soft start, soft stop and motor protection capabilities

• RS485 ModBus communications

• Analog I/O

• Available with MX3 technology


4-17

RX3E Series with MX3 Technology Model Number

A

HP CB Dimensions (in.) Weight (lbs.)NEMA 12 List Price NEMA 3R List Price 480 V Trip H W D

RX3E-050-480-12KP $6,395.00 RX3E-050-480-3RKP $6,755.00 65 50 125 26 24 12 215

RX3E-075-480-12KP $6,750.00 RX3E-075-480-3RKP $7,335.00 96 75 175 26 24 12 220

RX3E-100-480-12KP $7,885.00 RX3E-100-480-3RKP $8,365.00 124 100 225 48 24 12 230

RX3E-125-480-12KP $8,550.00 RX3E-125-480-3RKP $8,955.00 156 125 250 48 24 12 320

RX3E-150-480-12KP $8,675.00 RX3E-150-480-3RKP $9,085.00 180 150 300 48 24 12 325

RX3E-200-480-12KP $10,775.00 RX3E-200-480-3RKP $11,000.00 240 200 400 48 36 16 335

RX3E-250-480-12KP $11,725.00 RX3E-250-480-3RKP $12,000.00 302 250 500 70 30 18 510

RX3E-300-480-12KP $12,000.00 RX3E-300-480-3RKP $12,250.00 361 300 600 70 30 18 515

RX3E-400-480-12KP $16,500.00 RX3E-400-480-3RKP $17,000.00 477 400 800 87 37 20 765

RX3E-500-480-12KP $23,000.00 RX3E-500-480-3RKP $24,000.00 590 500 1000 87 37 20 790

RX3E-600-480-12KP $24,000.00 RX3E-600-480-3RKP $25,000.00 720 600 1200 87 37 20 815

50–600 HP units are service entrance rated.

Built-to-order: Please allow one week for shipment.

Web stocked


RX2E Series with MX2 Technology Model Number

List Price List Price A

HP CB Dimensions (in.) Weight (lbs.)NEMA 12 NEMA 3R 480 V Trip H W D

RX2E-050-480-12KP $5,300.00 RX2E-050-480-3RKP $5,800.00 65 50 125 26 24 12 215

RX2E-075-480-12KP $6,500.00 RX2E-075-480-3RKP $6,835.00 96 75 175 26 24 12 220

RX2E-100-480-12KP $7,250.00 RX2E-100-480-3RKP $7,955.00 124 100 225 48 24 12 230

RX2E-125-480-12KP $7,300.00 RX2E-125-480-3RKP $8,625.00 156 125 250 48 24 12 320

RX2E-150-480-12KP $7,450.00 RX2E-150-480-3RKP $8,755.00 180 150 300 48 24 12 325

RX2E-200-480-12KP $9,565.00 RX2E-200-480-3RKP $10,750.00 240 200 400 48 36 16 335

RX2E-250-480-12KP $10,525.00 RX2E-250-480-3RKP $11,750.00 302 250 500 70 30 18 510

RX2E-300-480-12KP $10,875.00 RX2E-300-480-3RKP $12,000.00 361 300 600 70 30 18 515

RX2E-400-480-12KP $14,000.00 RX2E-400-480-3RKP $16,750.00 477 400 800 87 37 20 765

RX2E-500-480-12KP $19,000.00 RX2E-500-480-3RKP $20,000.00 590 500 1200 87 37 20 790

RX2E-600-480-12KP $20,000.00 RX2E-600-480-3RKP $22,000.00 720 600 1200 87 37 20 815

Prepackaged Starters with ATL Bypass


4-18 benshaw.com


Prepackaged StartersMX2PC / MX2PB Series with MX2 TechnologyNon-Bypass / Continuous Duty or Integral Bypass

1. Select a starter type:

• MX2PC modular non-bypass

• MX2PB modular bypassed

2. Select a horsepower rating

3. Select a voltage

4. Select an enclosure

5. Select a circuit breaker (or none)

6. Select your options

Configure the MX2PB / MX2PC to fit your application

To choose a stock starter, simply select a unit from the following pages. We will ship stock units ship the same day.

To modify a starter, select a unit from the following pages, then add an alpha board and / or other options as needed from the Options section (see page 4-23). We will modify the stock unit for next day shipment.

MX2PB / MX2PC configurable solid state starters stocked as:• Non-combination

• Combination circuit breaker

• Rotary disconnect operator

• Non-bypass

• Bypass contactor

• NEMA 4 or 12 enclosure

• Modular operator station

• 480 V

• Standard 120 V control power transformer

• Service entrance rated with circuit breaker

• Door mounted key pad

(Stock Unit

Shown)

k

Model shown is completely configured with all options.


4-19

MX2PB SD 150 4 4 CB ST

All units include 120 V control power transformer.

Starter SeriesMX2PC = Modular

Non-Bypassed

MX2PB = Modular Bypassed

Standard Duty HP Rating20 = 20 HP

30 = 30 HP

40 = 40 HP

50 = 50 HP

75 = 75 HP

100 = 100 HP

150 = 150 HP

200 = 200 HP

300 = 300 HP

400 = 400 HP

Voltage4 = 480 V

2 = 240 V

Enclosure4 = NEMA 4/12

DisconnectNC = None


OptionsST = Standard

OP = Options Included

MX2PB / MX2PC Series with MX2 TechnologyPart Number Assembler

Prepackaged Starters

Duty TypeSD = Standard Duty

HD = Heavy Duty


4-20 benshaw.com

MX2PB Series with MX2 TechnologyIntegral Bypass Non-Combination

240 V

Model NumberStd. Duty1

HPHeavy

Duty2 HP

Dimensions (in.) Weight (lbs.) List PriceV H W D

MX2PB-015-2-4-NC ** 15 15 240 24 16 15 110/3 $4,050.00

MX2PB-020-2-4-NC ** 20/25 20 240 24 16 15 110 $4,100.00

MX2PB-030-2-4-NC ** 30/40 30/40 240 36 16 15 150 $4,625.00

MX2PB-050-2-4-NC ** 50 50 240 36 20 15 150 $4,850.00

MX2PB-075-2-4-NC ** 60/75 60/75 240 48 20 15 180 $5,050.00

MX2PB-100-2-4-NC ** 100 – 240 48 20 15 180 $5,225.00

MX2PB-150-2-4-NC ** 150 100 240 48 20 15 180 $6,045.00

MX2PB-200-2-4-NC ** 200 150 240 78 30 20 350 $8,300.00

** Insert option code. See page 4-22 for a list of available options. ST = No options / OP = Options included

1 Standard duty = 350% current for 30 seconds, 1.15 S.F.

2 Heavy duty = 500% current for 30 seconds, 1.25 S.F.

Built-to-order

480 V


HPHeavy

Duty2 HP


MX2PB-030-4-4-NC **2 30 30 480 24 16 15 110 $4,050.00

MX2PB-050-4-4-NC **2 50 40 480 24 16 15 110 $4,100.00

MX2PB-075-4-4-NC **2 75 75 480 36 16 15 150 $4,625.00

MX2PB-100-4-4-NC **2 100 – 480 36 20 15 150 $4,850.00

MX2PB-150-4-4-NC **2 150 150 480 48 20 15 180 $5,050.00

MX2PB-200-4-4-NC **2 200 – 480 48 20 15 180 $5,225.00

MX2PB-300-4-4-NC **2 300 200 480 48 20 15 180 $6,045.00

MX2PB-400-4-4-NC **2 400 300 480 78 30 20 350 $8,300.00




Available for same day shipment, or modified for next day shipment.

Web stocked




4-21

MX2PB Series with MX2 TechnologyIntegral Bypass Combination Circuit Breaker

240 V


HPHeavy

Duty2 HP


MX2PB-020-2-4-CB ** 20/25 20 240 36 16 15 175 $5,150.00

MX2PB-030-2-4-CB ** 30/40 30/40 240 42 20 15 200 $5,325.00

MX2PB-050-2-4-CB ** 50 – 240 48 24 15 220 $5,695.00

MX2PB-075-2-4-CB ** 60/75 60/75 240 48 24 15 220 $6,325.00

MX2PB-100-2-4-CB ** 100 – 240 48 24 15 220 $6,675.00

MX2PB-150-2-4-CB ** 150 100 240 48 24 15 220 $8,375.00

MX2PB-200-2-4-CB ** 200 150 240 78 30 24 400 $10,450.00




Built-to-order: Please allow 2 week lead time.

Model Number Description List Price

KPMX3CBL2M NEMA 12 / 3R Remote Keypad with 2 Meter Cable

$425.00

480 V


HPHeavy

Duty2 HP


MX2PB-050-4-4-CB **2 50 40 480 36 16 15 175 $5,150.00

MX2PB-075-4-4-CB **2 75 75 480 42 20 15 200 $5,325.00

MX2PB-100-4-4-CB **2 100 – 480 48 24 15 220 $5,695.00

MX2PB-150-4-4-CB **2 150 150 480 48 30 15 220 $6,325.00

MX2PB-200-4-4-CB **2 200 – 480 48 30 15 220 $6,675.00

MX2PB-300-4-4-CB **2 300 200 480 48 30 15 220 $8,375.00

MX2PB-400-4-4-CB **2 400 300 480 78 30 24 400 $10,450.00




Available for same day shipment, or modified for next day shipment.

Web stocked



4-22 benshaw.com

MX2PB / MX2PC Series With MX2 TechnologyOptions

Option Code Space Heater Option List Price

U4 Space Heater with Thermostat $445.00

Option Code Control Options (only one code can be selected) List Price

QN Run Light $125.00

QF Reset Push-Button $85.00

CP Start / Stop Push-Buttons $175.00

CQ Start / Stop Push-Buttons and Run Light $235.00

CR Start / Stop Push-Buttons, Run Light, Fault Light and Reset Push-Button

$500.00

RK Fault Light $125.00

CS Fault Light and Reset Push-Button $210.00

CT Run Light, Fault Light and Reset Push-Button $335.00

CU HOA and Start / Stop Push-Buttons $325.00

CV HOA, Start / Stop Push-Buttons and Run Light $445.00

CW HOA, Start / Stop Push-Buttons, Run Light, Fault Light and Reset Push-Button $655.00

Option Code Communications Options List Price

CD Profibus

CE DeviceNet

CF Ethernet

CG Lon Works

CH IP Internet Web Addressable

CC RS232 Connector — Allows User to Connect Remotely without Opening the Encl. Door

Consult factory




4-23

Engineered Low Voltage Starter PackagesOverview

Benshaw has developed advanced engineering, drafting, materials management and quality systems focused on designing and building customer solutions. This "Engineered-to-Order" capability, combined with an extensive inventory of control components, protective relays, circuit breakers, contactors, enclosures and other electrical / electronic devices, enables Benshaw to quickly ship engineered products.

Control Modifications — Whatever You Specify:• Over 250 modifications and accessories are available, including: pilot devices,

PLCs, control power transformers, switches, meters, relays, space heaters, and protective devices.

Combination Starters — To Meet Your Requirements:• 15 to 2000 amp circuit breakers

• 40 to 2000 amp non-fused disconnects

• 30 to 800 amp fusible disconnect

• Flange or rotary handle mechanism

Power Stacks — To Fit Your Application:• Continuous duty / non-bypassed

• Integral bypass

• Standard, heavy and severe duty

• Emergency across-the-line bypass

Enclosures — To Match Your Environment:• Standard designs — NEMA 1, 12, 4 chassis


• Special enclosures — 3R, 4X, 7, 9, as specified


Communication• ModBus / RS485

: pilot devices, ce heaters,

ModBus / RS485

Benshaw quickly ships engineered products.


4-24 benshaw.com

RATINGS

Horsepower:

20–1500 HP

Overload:


Starting Torque:

0–100%

Voltage:

200–1000 VAC

Typical Resistance Steps:

1-2

Product Highlights:

Wound rotor motors are typically used in applications requiring high starting torques, a limited number of operating speeds, or a stepped acceleration to achieve a soft start. Typical existing applications utilize an electromechanical starter on the stator and introduce multiple stages of resistance in the rotor via contactor arrangements to achieve a soft ramp.

With the RediStart MX3, wound rotor control is greatly simplified. The RediStart consists of two major sections: 1) A solid-state stator control, and 2) secondary resistors into the rotor circuit from a separate 3-phase resistor bank. This achieves the high torque required by the application—with low inrush—while providing a smooth stepless start. This greatly reduces the maintenance cost of the typical electromechanical control.

Single Step Rotor Control: The solid-state starter is wired to the motor stator circuit, and the resistor and shorting contactor are wired to the motor rotor circuit. The solid state starter accelerates the motor to slip speed (determined by the resistance value) and then activates the contactor to short the rotor. This allows the motor to accelerate to full speed.

Multiple Step Rotor Circuit: WR RVSS series starters can be supplied with multiple stages of rotor resistor and contactor combinations. This arrangement may be necessary for multiple step starting of extremely high inertia loads, or for continuous operation at multiple speeds. Multiple steps of rotor resistance can be coordinated to achieve this.

Variable Speed Control: Variable speed control of wound rotor motors can be accomplished with the RediStart series control. By maintaining full output voltage of the control going to the stator of the wound rotor motor, and varying the resistance in the rotor, variable speed is accomplished.

Resistors must be rated for continuous duty operations. Variable loads (pumps and fans) only.

Key Advantages:


Wound Rotor Starters

• Benshaw MX3 technology

• Single step rotor control



• Advanced MX3 motor protection

• Advanced MX3 metering function

• Real time clock

• 99 event log history

• Modbus capable


• Multistep and variable speed rotor control available


• Reduced in size and number of resistors needed




4-25

Wound Rotor Motor Starter Check ListPresent starting method

Across the line Other ___________________________________

Rotor circuit information

Present number of steps of resistance ____________

Total starting ohm value ____________ ohms

Current method of resistance shorting

Step one ____________ sec. Step two _________ sec. Step three______ sec. Step four _____ sec. Step five ____ sec.

The present number of steps may be more or less than listed above. Please specify.

Motor information

Primary voltage______________

Secondary voltage_______________

Primary amps________________

Secondary amps_________________

RPM ________________ Service Factor________________





4-26 benshaw.com

SEP Series

RATINGS

Horsepower:

20–1500 HP

Overload:


Starting Torque:

0–100%

Voltage:

200–1000 VACIncludes discharge resistor and synchronous excitation package for brush type and brushless motor.

Exciter Ratings:

125–250 VDC 30–120 A*

* Consult factory for higher Amp rating.

Product Highlights:

The sync motor functions as an induction motor during start up. Once the motor approaches full synchronous speed, the Redistart DC exciter induces a constant polarity to the rotor causing the motor to lock into sync. Because the rotor’s field is constant and separately excited, there is no slip required to produce torque, as with an induction motor. This allows the motor to run at synchronous speed.

The Benshaw synchronous package consists of a solid state starter portion connected to the stator and an SEP (synchronous excitation package) that is connected to the rotor section in conjunction with a discharge resistor. This SEP is supplied for brush type and brushless exciters.

Synchronous Benefits:

The RediStart series solid state starter provides reduced voltage stepless acceleration and automatic synchronization of three phase AC synchronous motors. Synchronous motors are utilized for a number of reasons. They are used in applications that require precise motor speed, they are used to obtain greater efficiencies and they are used for facility power factor correction.

Since synchronous motors can be operated at leading power factor, they are used to correct a facility’s lagging power factor created by all the other induction motors being operated.

This correction reduces the penalty a customer pays the utility company for creating poor power factor.

Key Advantages:

• Benshaw synchronous technology

• Solid state synchronous rotor control



• Advanced synchronous motor protection

• Can be added to existing equipment

• Can be supplied with MX2 or MX3 starter control

• Modbus communication



• Reduction in size compared to existing field control



• Brush type and brushless control


Synchronous Starters


4-27

Synchronous Motor Starter Check List

Present starting method

Across the line Other please specify ______________________ Application _______________________

Field discharge resistor value____________ohms

Motor information

Motor horsepower__________ Motor frequency ________Hz

Field voltage_______________ Max field current __________

Full load current____________ Motor LRA________________ Motor voltage________

RPM______________________ Service Factor_____________

Motor Wk2 ________________ Load Wk2_________________ Motor Speed ____RPM




Brushless exciter or Brush Type exciter

Options : Circuit Breaker Fusible Switch No disconnect needed

Bypass contactor run duty only

120 VAC control power by Benshaw

Start Stop Pushbutton

Hand Off Auto Local Off Remote 2-Wire Control 3-Wire Control


4-28 benshaw.com

RB2 / RB3 Series

RATINGS

Horsepower:

20–1500 HP

Overload:


Starting Torque:

0–100%

Voltage:

200–1000 VAC

Product Highlights:

Benshaw also offers a microprocessor controlled solid state reduced voltage reversing starter for three phase induction motors. This starter provides a closed loop current ramp for smooth stepless motor acceleration. The RediStart reversing starter is offered with a reversing contactor set.

Key Advantages:• Benshaw MX2 or MX3 technology with reversing contactor control

• Available with DC injection brake



• Advanced MX2 or MX3 motor protection

• Advanced MX2 or MX3 metering function

• Real time clock (MX3 only)

• 99 event log history (MX3 only)

• ModBus communication




Solid State Starters with Reversing Control


4-29

Solid State Starters with Two Speed ControlMX2 / MX3 Series

RATINGS

Horsepower:

20–1500 HP

Overload:


Starting Torque:

0–100%

Voltage:

200–1000 VACTwo Speed Two WindingTwo Speed One Winding

Product Highlights:

These RediStart solid state starters provide reduced voltage stepless control of two speed three phase AC induction motors.

The two speed starter can be used with two speed, two winding motors. It contains a ten SCR power section or it can be used with two speed, single winding motors.

The logic control incorporates MX2 or MX3 technology with all the circuitry required to drive the power semiconductors located in the power section.

Benshaw RediStart two speed starters are electronically interlocked so that a start cannot be initiated at one speed if the starter is already running in another.

Key Advantages:• Benshaw MX2 or MX3 series control

• Two speed one winding or two speed two winding available


• Reversing available


• Advanced MX2 or MX3 motor protection

• Advanced MX2 or MX3 metering function

• Real time clock (MX3 only)

• 99 event log history (MX3 only)

• ModBus communication




4-30 benshaw.com

R B 2 1 S 100 480 S 04 NC ST

Starter SeriesR = RediStart

OptionsST = Standard

OP = Options Included

Engineered PackagesPart Number Assembler


Solid State Starters

ConfigurationB = Bypass

Contactor

C = Continuous

Control2 = MX2

Technology

3 = MX3 Technology DC Injection Braking

Type of Bypass0 = None

1 = Integral

2 = Separate, Definite Purpose

3 = Separate ATL IEC Rated

4 = Separate ATL NEMA Rated

Interrupt RatingS = Standard

H = High

Horsepower1 = 1 HP

2 = 2 HP

3 = 3 HP

5 = 5 HP

7 = 7.5 HP

10 = 10 HP

15 = 15 HP

20 = 20 HP

25 = 25 HP

30 = 30 HP

40 = 40 HP

50 = 50 HP

60 = 60 HP

75 = 75 HP

100 = 100 HP

125 = 125 HP

150 = 150 HP

200 = 200 HP

250 = 250 HP

300 = 300 HP

400 = 400 HP

500 = 500 HP

600 = 600 HP

700 = 700 HP

800 = 800 HP

900 = 900 HP

1000 = 1000 HP

Disconnect OptionNC = Non-

Combination


FD = Fusible Disconnect

EnclosureOC = Open

Chassis

1 = NEMA 1

12 = NEMA 12

4 = NEMA 4

3R = NEMA 3R

Power Stack RatingS = 350% 30

Seconds

H = 500% 30 Seconds

V = 600% 30 Seconds

Voltage208 = 208 V

240 = 240 V

480 = 480 V

575 = 575 V

OptionsST =

OP =

Disconnect OptioonNC = Non-

Combinat

CB = Circuit BBre

FD = Fusible Disconnec

Rating0% 30 conds

0% 30

SeriRed

onass

ntactor

ntinuous

T

esdiStart


5-1

Wye Delta Starters

Smart Wye-Delta Starter Kits .............5-2


5-2 benshaw.com

Wye Delta Starters

Smart Wye-Delta Starter KitsProduct Highlights:

Benshaw’s MX2 control technology provides an innovative way to bring powerful, flexible, intelligent low voltage motor control to traditional non-intelligent wye delta electro-mechanical starters. MX2-based controls offer multiple, user selectable modes, an increased selection of configurable analog and digital I/Os, comprehensive metering capabilities, unprecedented on-board protections and an easy to use interface.

Benshaw’s MX2 technology makes for an excellent alternative to traditional electro-mechanical wye delta starters. The transition from wye to delta is controlled by the solid state circuitry to ensure ease in setting up the wye delta starter parameters to match your application.

With more built-in starting modes, more built-in metering, protection features and additional communication capabilities, Benshaw’s MX2-based low voltage wye delta starters raise the bar for intelligent, low cost wye delta controls.

Control Features: (Partial)

Wye Delta Starters

Motor Protection

• Motor thermal overloads

• Up to speed time exceeded




• Phase reversal

• Phase loss

• Instantaneous

• Over current

• Under current


Metering

• Average current

• L1 current

• L2 current

• L3 current


• Ground fault amps / residual

• Average or phase volts

• Overcurrent power factor

• Watts

• VA

• kW hours

Benshaw’s SMART wye delta starters are available in both non-combination and combination packages and NEMA 1, 12, 3R and 4 enclosures. All UL listed and NEMA compliant. Many options and accessories can be added; please consult factory with your specific needs.


5-3

Smart Wye DeltaStarter Max Amps Model Number Description Enclosure Size (in.)

1559 FS-SMYD-MX-00-XX Smart Wye-Delta Starter Kit, 1559A, 200–575V 86x72x24















XX denotes enclosure type e.g. 1, 12, 3R or 4.

Smart Wye Delta – Combination Circuit BreakerStarter Max Amps Model Number Description Enclosure Size (in.)
















XX denotes enclosure type e.g. 1, 12, 3R or 4.

Smart Wye-Delta Starter Kits


5-4 benshaw.com

Wye Delta Starters

Smart Wye-Delta Starter KitsBasic Wiring Diagram


6-1

Pump Control Starters

Prepackaged Full Voltage Starters with Door Mounted Controls .............6-2

Engineered / Configurable Pump Panels ......................................6-4


6-2 benshaw.com


Prepackaged Full Voltage Starters With Door Mounted ControlsRCI SeriesNon-Combination / Combination / NEMA 12/3R / Electronic Overload Protection

• Control Terminal Block

• Fused Control Power Transformer

• Grounding Lug

• Circuit Breaker with Operator CBRCI (Type)

• NEMA Rated Contactor

• SPE Electronic Overload Relay

Product Highlights:

RCI starters are NEMA Rated, cUL listed, completely integrated, full voltage/non-reversing starter packages. The rugged NEMA 12/3R design is ideal for Industrial Duty Applications such as pumps, compressors, conveyors, fans and any other continuous duty equipment. The “three wires in/out” design includes the Benshaw SPE, field adjustable electronic overload relay, which enables quick installation and startup with precision motor protection...standard.

Rugged. Reliable. Ready.

Key Advantages:• cUL listed

• NEMA rated, heavy duty contactors

• NEMA 12/3R enclosure

• Field adjustable SPE electronic overload relay

• Two year warranty - standard

• Complete door mounted operator control package

• 480/240: 120 fused control power transformer

• “Three wires in/out” installation and startup

• Combination or non-combination

Provided with SPE Electronic Overload Relay

SPE electronic overload relays provide field adjustable, precise motor protection, including:

• Adjustable overload class (1–30)

• Wide range of current adjustments

• 1 NO and 1 NC auxiliary contact

• Current imbalance detection

• Phase loss detection

• Phase reversal protection

• Trip free design

• Test function/trip indication

• Fault indicationSPE Electronic Overload Relay


6-3

NCRCI Non-Combination Full Voltage Non-Reversing Starters

CBRCI Combination Full Voltage 480V Non-Reversing Starters

CBRCI Combination Full Voltage 240V Non-Reversing Starters

NCRCI CBRCI

NCRCI — 240V or 480V

Model Number NEMA Size

NEMA Horsepower

Dimensions (in.) Weight List Price240V 480V

NCRCI93R 1,2,4 00 1.5 2 14 x 10 x 7 30 $1,055.00

NCRCI183R 1,2,4 0 3 5 12 x 10 x 8 30 $1,075.00

NCRCI323R 1,2,4 1 7.5 10 12 x 10 x 8 32 $1,095.00

NCRCI503R 1,2,4 2 15 25 16 x 12 x 9 32 $1,200.00

NCRCI853R 1,2,4 3 30 50 16 x 12 x 9 60 $1,250.00

NCRCI1503R 1,2,4 4 50 100 16 x 12 x 9 60 $1,945.00

Web stocked

CBRCI — 480VModel Number NEMA Size CB Trip NEMA HP Dimensions (in.) Weight List Price

CBRCI9-4-3R 1,4 00 15 2 20 x 16 x 10 48 $1,495.00

CBRCI18-4-3R 1,4 0 20 5 20 x 16 x 10 48 $1,525.00

CBRCI32-4-3R 1,4 1 30 10 24 x 12 x 10 63 $1,725.00

CBRCI50-4-3R 1,4 2 70 25 30 x 12 x 10 63 $1,895.00

CBRCI85-4-3R 3,4 3 100 50 36 x 16 x 10 125 $2,225.00

CBRCI150-4-3R 3,4 4 200 100 36 x 16 x 10 125 $2,375.00

CBRCI300-4-3R 3,4 5 400 200 48 x 24 x 16 250 $4,225.00

Web stocked

CBRCI — 240VModel Number NEMA Size CB Trip NEMA HP Dimensions (in.) Weight List Price

CBRCI9-2-3R 1,5 00 15 1.5 20 x 16 x 10 48 $1,495.00

CBRCI18-2-3R 1,5 0 20 3 20 x 16 x 10 48 $1,525.00

CBRCI32-5-2-3R 1,5 1 40 5 24 x 12 x 10 63 $1,725.00

CBRCI32-7.5-2-3R 1,5 1 50 7.5 24 x 12 x 10 63 $1,725.00

CBRCI50-2-3R 3,5 2 70 15 30 x 12 x 10 63 $1,895.00

CBRCI85-2-3R 3,5 3 125 30 36 x 16 x 10 125 $2,225.00

CBRCI150-2-3R 3,5 4 200 50 36 x 16 x 10 125 $2,375.00

1) Units can be shipped via air and/or parcel.2) Units are built as 480V w/dual tap transformer and fusing for 240 volt.3) Units cannot be shipped via air - they must ship by common carrier.4) Units are in stock.5) Units are not stocked - allow 2 weeks for shipping.

• NEMA 12/3R enclosure

• cUL listed

• NEMA rated contactor and, separately mounted SPE overload relay

• 480/240:120 fused control power transformer

• Door-mounted start and stop push-buttons

• Door-mounted overload reset push-button

• Red run indicator light

• (2) Auxiliary contacts

• Hand off auto selector switch

Prepackaged Full Voltage Starters With Door Mounted Controls


6-4 benshaw.com


Engineered / Configurable Pump PanelsEngineered / Configurable — Combination Full Voltage Starters / NEMA 3RNEMA Size 1–6 / NEMA 3R Enclosed (with Solid State Overload Protection)

Product Highlights:

Benshaw’s pump control panels are UL listed and are available as NEMA HP rated. A NEMA 3R enclosure design makes these panels ideal for a wide range of heavy duty pumping and irrigation applications.

Al panels are service entrance "SUSE" rated and backed by Benshaw’s unmatched quality and 24/7 service.

Heavy duty performance, low cost and configurability make these pump control panels an exceptional value. Choose a standard configuration or select options from the list of factory modifications on page 6-7.***

Standard Features:• 240/480 volt, three phase

• Heavy duty fusible switch or circuit breaker (low profile)*

• Class R fuse clip**

• Flange operated disconnect

• Solid state overload and pump protection (Class 10)

• HOA switch

• Start push button

• Outdoor rated NEMA 3R enclosure

• Oversized panel

• Defeatable disconnect

• UL listed panel

• Ground lug

• Service entrance rated

Factory Modified Options:• Pre-wired motor and pump protector relay

• Power surge lightning protection

• Pre-wired time clock (24hr)

• Pre-wired control transformer (120 V)

• Electronic overload phase protection relay

• Pre-wired panel heater

• Disconnect switch interlock

• Circuit breaker shunt trip

• Back spin protection

• Elapsed time meter

• Power, run and fault indicator lights

• Extra capacity CPT 100 or 150 VA

* 240 V units are built to order. Please allow two weeks for shipment.

** Fuse not provided. Recommend Class R type, dual element delay.

*** Consult factory for additional details on a variety of options.


6-5

Factory OptionsFactory modifications are available for all Benshaw pump panels.

Pilot Devices Options• Run Pilot Light (Red)

• Run Pilot Light (Green)

• Off Pilot Light (Green)

• Off Pilot Light (Red)

• OL Trip Pilot Light (Yellow)

• On Pilot Light (Red)

• On Pilot Light (Green)

Extra Auxiliary Contact Blocks Options• Factory Installed 1 N/O and 1 N/C

• Factory Installed 2 N/O and 2 N/C

Meters Option• Elapsed Time Meter (Analog,

Non-Resettable)*

Advanced Motor Protection Options• Electronic Overload (Class 1~30)*

• Digital Overload (Class 1~60)*

• Pump Saver 777 - Voltage Current Protection

• Pump Saver 777 - LR - kW Protection

* Requires 120 V control power.

Pilot lights are full voltage supplied at same

voltage as contactor coil.

Enclosure Mounted Options• Lightning Surge Protector

• Time Clock 24Hr.

• Space Heater*

• Disconnect Switch Interlock

• Back Spin Protection*

Standard Capacity Options• 240 V Primary

• 480 V Primary

150VA Extra Capacity Options• 240 V Primary

• 480 V Primary

Engineered / Configurable Pump Panels

* Requires 120V control power.


6-6 benshaw.com

Notes


6-7

Notes


6-8 benshaw.com

Notes


Benefits of the M2L 3000 include:

• Compact Modular Design

• Arc Resistant

• Installation Flexibility

• Energy Efficiency

• Robust Control Architecture

Developed, designed and

manufactured in the USA.

Supported around the globe.

The M2L 3000 Medium Voltage Variable Frequency Drive is a step change

in motor control power technology. Though designed for industrial

applications, it benefits from Benshaw’s wide ranging experience in defense

and nuclear-related technologies, an arena where products must meet the

most rigorous standards and where failure is simply not an option.

Our innovative patented topology — modular multilevel converter (M2LC)

— is powered by state-of-the-art hardware and software control. Our

control algorithms are setting the stage for the next generation of VFDs.

Introducing the M2L 3000 Series Medium Voltage Variable Frequency Drive.

Variable frequency.Unchanging innovation.

To learn more about the M2L 3000, visit http://benshaw.com, call 412-968-0100 or e-mail [email protected]

Specifications are subject to change without notice.

©2015 Regal-Beloit Corporation MKT 125-013R Printed in the USA

A Regal Brand

www.regalbeloit.com

Visit us online at benshaw.com and benshawexpress.com, or contact: BENSHAW, Inc. 615 Alpha DrivePittsburgh, PA 15238Phone: 412.968.0100 Fax: 412.968.5415 BENSHAW Canada 550 Bright Street East Listowel, Ontario N4W 3W3 Phone: 519.291.5112 Fax: 519.291.2595

24/7 Technical Support

Benshaw is dedicated to providing comprehensive 24-hour-a-day, 7-day-a-week phone support. Benshaw provides repair, spare parts, field engineering, retrofit and training services, when and where you need us. You can count on our experienced team, backed by the latest diagnostics and repair tools and an extensive parts inventory to support your operations. Call 1.800.203.2416

24/7 Hotline Support from our operations in Pittsburgh and Listowel (Canada):

• Technical phone support

• Overnight parts shipment

• 24-hour service dispatch

• Coordination of all service capabilities

Repairs

Repairs are made on Benshaw equipment by trained, experienced personnel, using the latest diagnostic and test equipment.

Field Services are performed on-site by skilled technicians, engineers or complete teams if needed, including:

• Start-up commissioning

• Field repairs

• Field analysis/data collection

• Preventative maintenance

• Retrofits

The Benshaw Product Line

A wide range of motor controls and drives is available.

• Solid-state starters fractional up to 30,000HP at 15kV

• LV AC drives to 2,000HP, MV AC drives to 10,000HP

• Electromechanical controls to 800A

Benshaw Express is a 24/7 online inventory and order entry system for authorized Benshaw distributors:

• 24/7 shipment

• Air or truck delivery

Documents

Prototype Catalog 2015 - Bensha Product Catalog... · benshaw.com Field Services: • Installations and commissioning • On-site repairs – Scheduled / emergency • • On-site