Protecting life, environment and property… 1 AutroFlame Detectors ID: AFLAME_X33_1_intro 09-2003

1

Protecting life, environment and property…

AutroFlameDetectors

AutroFlameDetectors

ID: AFLAME_X33_1_intro 09-2003

2


The New Flame Detectors FamilyThe New Flame Detectors Family

3


Massive Regulatory Changes Massive Regulatory Changes

• Factory Mutual 3260-2000

• DNV

• EN54 part-10

4


New Universal Features New Universal Features

• Dedicated Class I Div. I, EEx de wiring box

• Common housing for all technologies• More outputs options

– 2 Alarm relays– 1 Fault relay– 4-20 mA and relay– Modbus / RS485– Data logger– Addressable modules installed– Magnetic manual Oi activation switch

5


New Universal FeaturesNew Universal Features

• Temperature compensated heated optics– Heater will boost heat on cold startup and when the

detector temperature is below zero• Data event logger will record the detectors operating

temperature– Record of over-temperature events in turbine

enclosures

6


AutroFlame X33/1 Multispectrum IR

AutroFlame X33/1 Multispectrum IR

7


New CapabilitiesNew Capabilities

• Same extended performance as the X33• Configurable auxiliary relay • Form C alarm relay• PowerLoop direct connection

8


AutroFlame X33/1 & Q9033B MountAutroFlame X33/1 & Q9033B Mount

9


AutroFlame X33/1 Optical Integrity

AutroFlame X33/1 Optical Integrity

• New sensor and Oi ring orientation• Built in weather visor for improved water resistance• Optical integrity ring modified to keep water off the check surfaces

using a plastic metal bonded design• Optical integrity consecutive check time adjustable for improved

water and rain resistance

10


AutroSafe X33/1 Optical Integrity

AutroSafe X33/1 Optical Integrity

• Automatic optical integrity test monitors for both loss of, and increased sensitivity in each sensor

• Manual optical integrity test verified to perform a calibrated test of the detector and system

• Like a Genie, magnetic Oi, no test lamp required!

11


AutroFlame X52 Ultraviolet/Infrared Detector

AutroFlame X52 Ultraviolet/Infrared Detector

12



• New high speed capability- 30 ms• The best false alarm rejection for any UVIR detector• Heated optics

13


AutroFlame X98 Infrared Detector

AutroFlame X98 Infrared Detector

14



• Heated optics • Auxiliary relay

15


AutroFlame X22 Ultraviolet DetectorAutroFlame X22 Ultraviolet Detector

16



• Same high level signal processing • The best false alarm rejection for any UV detector• Heated optics

17


New Vibration Free MountNew Vibration Free Mount• Q9033B Mounting swivel with angle indicators

18


Weather Visor Flame PlatformWeather Visor Flame Platform

20


AutroFlame X33/1 Replacement Module

AutroFlame X33/1 Replacement Module

21


Protect•ir Laser Aimer Q1201CProtect•ir Laser Aimer Q1201C

22


Connection to AutroSafeConnection to AutroSafe

6 5

4

3

2

1

9

7

8

6

4

5

3

1

2

19

17

18

16

14

15

13

11

12

Com Fire

N.O. Fire

N.O. Fault

Com Fault2K

BN-300

X33/1 Detector

5861-011.4341 AutroFlame SS Exd w/built in BNB-3005861-011.4361 AutroFlame Alu Exd w/built in BNB-300

23


Typical Flame Detector Mounting

Typical Flame Detector Mounting

Conduit Seal Fitting

Minimum 10o down

mounting angle

24


Detector PositioningDetector Positioning

25


Flame Detector TestingFlame Detector Testing

• Only method to confirm system performance is an actual fire test

• Not practical or allowable at most jobsites

• Videotape recording common

• High-speed UV system response timer available

26


Flame Detector TestingFlame Detector Testing

• Complete system check-out with manual Oi is recommended (Calibrated System Check)

• Hand-held test lamp often required by customer• Test lamps do not confirm detection system

performance

27


New ApplicationsNew Applications

• Longer detection range requirements• New false alarm requirements• Class A fire materials• Nasty environments• Extreme cold environments

Documents

Protecting life, environment and property… 1 AutroFlame Detectors ID: AFLAME_X33_1_intro 09-2003