manufacturers. The company is a leader in cold forging, specializing in brakes, hubs, seatposts, handlebars and stems. It also has one of the most advanced rim and

CNC-machining facilities in the world.

Combine Promax’s world-class manufacturing ability with the design prowess and market knowledge of the Southern California-based design and marketing group Cycle Group Inc. (CGI), and you have a powerful package that is sure to result in great things to come.

Led by BMX and downhill mountain bike racing legend and pioneering component and accessories designer Toby Henderson, CGI is in charge of all Promax product design, aftermarket sales, marketing and brand development. CGI and its staff of avid cyclists and racers provide Promax with a direct link to cycling and the bike community—something we believe is crucial to our success.

Ingenuity ContinuesThe relaunch of Promax

has proved successful in BMX on the racing circuit, as well as among consumers. This success, in turn, has brought the brand a new level of interest and attention from all segments of the industry.

We welcome this. We thrive under the glare of the spotlight.

You can be sure that we will continue to innovate so that the next generation of Promax components will include a wide range of sensational products for mountain biking, cyclocross, road and BMX.

The Rebirth of PromaxLast year, we reintroduced Promax to the world.

Everything we brought to market was new and designed from a fresh perspective and with a new mission in mind. The response from the industry has been excellent.

Although Promax has been around since the late-1980s, the brand targeted the value-oriented bicycle component market. Over time, the product line suffered from benign neglect and it didn’t evolve as much as it should have.

Our vision for the brand, however, has been to elevate the brand in terms of design, quality and image across all cycling disciplines.

Last year, we relaunched the brand with a full line of BMX components, which were well received by riders and bike industry product managers alike. For 2014, we expanded our mountain bike offerings, some of which you will see in this catalog, and have put into overdrive our plans to design and produce more off-road and road parts.

What you will see inside this catalog and in the future from Promax will be innovative bicycle components, engineered and designed to address the specific needs of today’s cyclists—roadies, mountain bikers, commuters and BMXers alike.

The Power of Manufacturing + DesignPromax’s greatest strength is that it is one of

the world’s leading original equipment component

S-29 Stem NEW COLORSDeveloped for longer-travel trail bikes, the S-29 offers the perfect configuration to set up the rider for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive

clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. The oversize faceplate also results in one of the stiffest stem-to-bar interfaces available.

The stems are cold forged and CNC-machined from 6061-T6 aluminum for strength, low weight and durability. Available with extension from 50 to 100 millimeters in 10-millimeter increments. Meets or exceeds ENM standards. Available in anodized red, blue, gold and black. MSRP: $69.99

50MM-PX-ST1329R50: 119 grams/4.19 ounces60MM-PX-ST1329R60: 133 grams/4.69 ounces70MM-PX-ST1329R70: 147 grams/5.18 ounces80MM-PX-ST1329R80: 154 grams/5.43 ounces90MM-PX-ST1329R90: 160 grams/5.64 ounces100MM-PX-ST1329R100: 193 grams/6.8 ounces

DA-1 Stem NEWThe DA-1 stem works equally well as a road, mountain or

cyclocross stem. They are 3D cold forged, then CNC machined from 6061-T6 aluminum to create a lightweight and strong stem.

The two-piece face plate features our bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.

Available in red, blue, gold and black anodized in 60-130-millimeter extensions in 10-millimeter increments with 7 degrees of rise/drop. Meets or exceeds ENR standards. MSRP: $69.99

60mm-PX-ST13D1060: 130 grams/4.58 ounces70mm-PX-ST13D1070: 135 grams/4.76 ounces

80mm-PX-ST13D1080: 141 grams/4.93 ounces90mm-PX-ST13D1090: 146 grams/5.15 ounces100mm-PX-ST13D1100: 152 grams/5.36 ounces110mm-PX-ST13D1110: 157 grams/5.50 ounces120mm-PX-ST13D1120: TBD130mm-PX-ST13D1130: TBD

Promax 31.8 Banger Stem NEWThe new 31.8 Banger stem is the world’s first front-load stem

with a 31.8 Ø clamp for BMX racing and freestyle. Available in 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to

enhance the shape and further reduce weight. Available in anodized red, blue, gold and black with laser-

etched graphics. Meets or exceeds ENBMX standards. Use the Banger 31.8 Ø with the BOX Maximus bars for maximum gate pull. MSRP: $79.99

48-PX-ST144831F: 295 grams/10.40 ounces53-PX-ST145331F: 312 grams/11.00 ounces

Arielle Martin, World No. 4 and Factory Promax Elite

PHO

TO B

Y JE

RRY

LA

ND

RU

M

Disc Brake Pads NEWPromax sintered disc brake pads are

an excellent choice when your brakes need a pad replacment. Available to fit SRAM BB5, Promax 310, Decipher and Render and SRAM BB7/Juicy 5 and 7 and Promax E-Capsule disc brakes. MSRP: $19.99

PX-BP14PD032-SL: 15 grams/0.52 ouncesPX-BP14PD065-SL: 15 grams/0.52 ouncesPX-BP14PD70S-SL: 15 grams/0.52 ouncesPX-BP14PD71S-SL: 15 grams/0.52 ouncesPX-BP14PD96S-SL: 15 grams/0.52 ounces

P-1 Linear-Pull Brakes Available in two arm lengths, both the long 108-millimeter and

short 85-millimeter P-1 brake arms are cold forged from 6061-T6 aluminum. Cold forging produces the strongest, lightest weight and most durable bicycle parts.

Both sizes feature 35 millimeters of vertical brake pad adjustment—about 30 percent more adjustability than most linear-pull brakes.

P-1 brakes have a unique look that results in a design that is lightweight

yet provides maximum braking power.

Included are new, proprietary, two-tone, dual-compound, B-2 Air Flow, one-piece brake shoes developed by Promax specifically for the P-1 brakes.

Available in anodized red, blue, gold and matte black with laser-etched graphics and all-black, all-metal hardware. Meets or exceeds ENBMX standards. MSRP: $29.99

85mm-PX-BA130V085: 194 grams/6.8 ounces complete108mm-PX-BA130V108: 203 grams/7.1 ounces complete

Click V-Point Brake Lever NEWClick V-Point brake levers feature innovations not found on

any other lever. First, they have a built-in lock-on clamp that is compatible with Promax, most Velo and some other non-ODI lock-on grips. This feature ensures that your grips stay put while eliminating the need for an extra clamp. They also can be used with nonclamp-on grips.

The second feature is the patented V-Point mounting system that allows you to put the same lever on the right or left side of the bars. A dual wedge-style pinch-mounting system puts equal force on the bars from both sides of the lever. When mounting the lever on the left side, simply flip the wedges over to keep the mounting bolt facing the correct upward direction.

The symmetrical shape of the levers and a unique cable attachment position, further enhance the ambidextrous nature of the levers.

Click levers are cold forged from 6061-T6 aluminum then CNC machined. Cold forging is the only way to get high strength, low weight and durability.

Available in anodized red, blue, gold and matte black levers with matte black perches and laser-etched graphics and black hardware. Two lever lengths are available. Meets or exceeds ENBMX standards. MSRP: $19.99

Short: PX-BL130VPSR: 69 grams/2.43 ouncesLong: PX-BL130VPLR: 73 grams/2.57 ounces

and further reduce weight. The “open” design keeps weight low, while maintaining plenty of

strength and ensuring your bars stay put. Available in anodized red, blue, gold and matte black with

laser-etched graphics. Meets or exceeds ENBMX standards. MSRP: $49.99

48mm-PX-ST134818T: 272 grams/9.59 ounces53mm-PX-ST135318T: 278 grams/9.80 ounces60mm-PX-ST136018T: 295 grams/10.40 ounces

Banger StemBanger stems have a front-load design and can be used with

either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight.

Available in anodized red, blue, gold and matte black with laser-etched graphics. Meets or exceeds ENBMX standards. MSRP: $49.99

48mm-PX-ST134818F: 269 grams/9.5 ounces53mm-PX-ST135318F: 276 grams/9.8 ounces

Decipher Disc BrakesThe Decipher hydraulic disc brake features reach-adjustable

levers, excellent modulation, cold-forged lever perch, compact 2-piece, dual-piston calipers and cold-forged caliper bodies—all at an economical price.

The brakes come with sintered pads and 160-millimeter front and rear brake rotors. They are post-mount compatible as well as compatible with Avid® BB5 pads. Other rotor sizes available. MSRP: $199.99

PX-DB1300DEC-GY: 230 grams/8.1 ounces for caliper, lever and hose

Promax 31.8 Impact Stem NEW The new 31.8 Impact stem has a 45-degree top-load design for

BMX racing and freestyle. Available in 48-, 53- and 60-millimeter

extensions, the stems are cold forged from the highest quality 6061-T6 aluminum then CNC machined to refine the shape and further reduce weight.

Lighter than many traditional 22.2 Ø the Impact 31.8’s open design keeps weight low, while maintaining plenty of strength and the oversize 31.8 Ø clamp ensures that your bars stay put.

Available in anodized red, blue, gold and black with laser-etched graphics. Use the Impact 31.8 with the BOX Maximus bars for maximum gate pull. Meets or exceeds ENBMX standards. MSRP: $79.99

48mm-PX-ST144831T: 242 grams/8.5 ounces53mm-PX-ST145331T: 250 grams/8.9 ounces60mm-PX-ST146031T: 264 grams/9.3 ounces

Impact Stem NEW SIZESThe Impact is

our top-load BMX stem. They come in 48-, 53- and new 60-millimeter extensions and are cold forged from the highest quality 6061-T6 aluminum then CNC machined to refine the shape

P-1/Click Brake Kit NEWThe Promax brake kit includes one set of color-matched Promax

P-1 brake arms and one Click lever, plus a standard stainless steel Promax brake cable and B-2 Air Flow brake shoes. All necessary mounting hardware also is included.

Available in anodized red, blue, gold and matte black with laser-

etched graphics and black hardware. Available only with one-finger short and one-finger long levers.

The 85-millimeter brake arms come with a short Click lever while the 108-millimeter arms come with a long lever. Meets or exceeds ENBMX standards. MSRP: $49.99

85mm-PX-BK13VB085: 263 grams/9.23 ounces complete108mm-PX-BK13VB108: 276 grams/9.67 ounces complete

P-1 Grips and Clamps NEW P-1 Grips are designed to work with Promax P-1 brake levers

and grip clamps. They feature a popular diamond-file pattern grip surface and come in two sizes—90 mm and 120 mm lengths.

They have a closed-end design and, when used with the P-1 lever or the included grip Clamp, will stay firmly in place and not turn under most riding conditions.

P-1 Grip Clamps are designed to compliment the P-1 brake lever as well as boost grip

clamping power. Left and right-side specific. Available in black only with laser-

etched graphics. MSRP: $17.9990mm-PX-HG14CK090: 69 grams/2.43 ounces per pair including clamps120mm-PX-HG14CK120: 93 grams/3.28 ounces per pair including clamps

ERK BrakeERK U-brakes feature unique, patent-pending, inverted brake

springs and adjusters that decrease the overall height of the arms while creating an uncluttered look and easy adjustability.

The brake arms are cold-forged for low weight and increased strength. Cold forging is the best method for making lightweight, strong and reliable bike parts.

The two-tone/dual-compound brake pads were designed specifically for the ERK brake.

Matte black with laser-etched graphics and all-black hardware. All necessary mounting hardware is included. Meets or exceeds ENBMX standards. MSRP: $39.99

PX-BA1300UBK-BK: 191 grams/6.73 ounces with pads

Vice Brake LeversDesigned specifically to work with U-brakes, Vice brake levers

are available in one- and two-finger models and are cold forged from the highest quality 6061-T6 aluminum. Cold forging is the best

method for making lightweight, strong and reliable bike parts. A hinged clamp makes installing and removing the levers easy.

Brass bushings and an adjustable Allen-bolt mount ensure smooth lever action without lever wobble.

Matte black with laser-etched graphics. Meets or exceeds ENBMX standards. MSRP: $19.99

One-Finger Lever-PX-BL1300UB1-BK: 88 grams/3.1 ouncesTwo-Finger Lever-PX-BL1300UB2-BK: 93 grams//3.28 ounces

BE-1 Brake Post Extenders NEW BE-1 Brake Post Extenders

are the perfect solution for those needing that extra bit of brake pad adjustment without switching frame sizes. CNC-machined from 6061-T6 aluminum, BE-1 extenders easily mount to any frame’s existing cantilever brake bosses and provide an additional 16 mm of brake arm positioning.

All necessary hardware is included. MSRP: $19.99

PX-BK14EXTEN-BK: TBD

B-1 Brake ShoesAn up-grade from the one-piece B-2 Air Flow brake shoes, B-1s

are a great way to add versatility and vibrant color to any bike equipped with linear-pull brakes.

The B-1s have cartridge pad holders to fit 70-millimeter replacement pads, making it easy to swap out worn pads or, for the style conscious, to change pad colors. Just pull out the pin, slide out the old pad and replace it with a Promax B-1 pad in one of nine available colors.

Adding to the function of the B-1s, we spec’d the shoes with a pivoting post, so setting the toe-in is easy.

Available in anodized red, blue, gold and black bodies with laser-etched graphics, black pads and black hardware. MSRP: $14.99

PX-BP1300PRO: 57 grams/2.01 ounces per pair

Kory Cook Factory Promax Elite

PHO

TO B

Y MIC

HA

EL GA

MSTETTER

The 2013 Haro-Promax Factory Team: Left to Right, Carlie Ferree, Tyler Schaefer, Brooke Craft, Jayden Wenck, Madison Martinez, Rusty Nesvig, Madelynn DeSantis, Jake Goodwin, Hunter Pelham, Kevn Pauls, Dane Gilbert, Walker Finch, Mathew Pauls, Kristen Long, Bryce Hocking, Leo Hile, Chad Street and Jesse Welch. Not pictured, Tommy Vallejo, Bryant White, Christopher Blevins, Connor DeFrain and Andrew Townsend

LC-1 Linear Brake Cable KitsLC-1 linear brake cable kits start with custom housing that

includes stainless steel mesh-wrapped linear wires for the best combination of braking power and cable strength. The inner cable wires are stainless steel so they won’t rust over time.

Each cable kit includes 63 inches of Linear housing, a BMX-race specific stainless steel cable wire, two black brass ferrules and two black alloy cable end caps.

Available in black, red and blue. MSRP: $11.99

PX-BC130LKIT: 24 grams/0.84 ounces

HF-2 Hollow-Forged Crank SetThe HF-2 cranks are Promax’s top-of-the-line crank offering.

Hollow-forged from 6061-T6 aluminum, both crank arms are hollow so they are super stiff, yet lightweight. The crank arms spin on a

beefy 24-millimeter spindle permanently fitted into the drive-side arm.

With a 104-millimeter BCD four-bolt spider, they come in a variety of beautiful anodized finishes.

Available in anodized red, blue, gold and black with laser-etched graphics in 170-, 175- and 180-millimeter lengths. Bottom bracket sold separately. Meets or exceeds ENBMX standards. MSRP: $299.99

170-PX-CK13HF170: 768 grams/27.09 ounces175-PX-CK13HF175: 789 grams/27.83 ounces180-PX-CK13HF180: 793 grams/27.97 ounces

B-1 Replacement Brake PadsOur colorful B-1 replacement pads fit Promax B-1 and BOX

Components X-Ray cartridge brakes, as well as all other 70-millimeter cartridge brake pad holders from other manufacturers. Made using Promax’s proprietary braking compound, you can be sure you’ll stop when you need to.

Replacing the pads takes just minutes and is as easy as removing the pin, sliding out the old pad, refitting the new pad and replacing the cotter pin.

Available in black, white, red, blue, yellow, lime, orange, grey and pink. MSRP: $5.99

PX-BP13RPPRO: 24 grams/0.84 ounces

B-2 Air Flow Brake ShoesB-2 Air Flow brake shoes feature a simple, one-piece, co-molded

pad design that provides loads of stopping power. Available in black with white, red, blue, yellow, lime, orange, grey or pink pads, they are a great way to add color to any bike. MSRP: $7.99

PX-BP13AIRB2: 78 grams/2.75 ounces

B-1 Stubbies Brake Shoes NEWB-2 Stubbies feature an innovative

design that simplifies brake set-up, effectively eliminating the need to toe-in the shoes. MSRP: $7.99

PX-BP14STBB2-GY: TBD

CF-2 Two-Piece Crank Set NEWCold forged from 6061-T6 aluminum to be strong yet

lightweight, CF-2 cranks feature a two-piece design that incorporates a beefy 24-millimeter spindle permanently fitted into the drive-side arm.

With a 104-millimeter BCD four-bolt spider, they come in anodized red, blue, gold and black with laser-etched graphics in 160-, 165- and 170-millimeter lengths. Includes a sealed bottom bracket. Meets or exceeds ENBMX standards. MSRP: $199.99

160-PX-CK132P160: TBD165-PX-CK132P165: TBD170-PX-CK132P170: TBD

SQ-1 Crank ArmsThe SQ-1 cranks arms have a traditional, five-arm, 110-bolt

pattern spider and come in a variety of lengths to fit most riders or

riding situations, from the 5-and-under BMX racer to the 6-foot tall fixie-riding hipster.

Compatible with any JIS square-taper bottom bracket, they are cold-forged from 6061-T6 aluminum for strength, low weight and

Hunter PelhamFactory Haro/Promax

PHO

TO B

Y JERRY LA

ND

RU

M

durability and feature beautiful anodized finishes. Available in anodized red, blue, gold and black with laser-etched

graphics in lengths 135 to 170 in 5-millimeter increments. Bottom bracket sold separately. Meets or exceeds ENBMX standards. MSRP: $79.99

135mm-PX-CK13ST135: 501 grams/17.67ounces140mm-PX-CK13ST140: 503 grams/17.74ounces 145mm-PX-CK13ST145: 516 grams/18.20 ounces 150mm-PX-CK13ST150: 524 grams/18.48 ounces 155mm-PX-CK13ST155: 531 grams/18.73 ounces 160mm-PX-CK13ST160: 538 grams/18.97 ounces 165mm-PX-CK13ST165: 556 grams/19.61 ounces 170mm-PX-CK13ST170: 558 grams/19.69 ounces

EX-1 Bottom BracketEX-1 External bottom brackets feature cold-forged and

CNC-machined alloy cups, dual-labyrinth bearing covers and precision sealed bearings. They are the perfect match to Promax CF-2 and HF-2 cranks and ultimate upgrade to the budget BBs sold with most crank sets.

Available in anodized red, blue, gold and black, to fit all 24-millimeter bottom bracket spindles and frames with 68 or 73 x BC1.37” bottom bracket shells. MSRP: $54.99

PX-BB13000EX: 103 grams/3.63 ounces

SC-1 Square-Taper Bottom BracketSC-1 bottom brackets are the perfect choice for those who

still prefer the low weight and simplicity of square taper cranks. Each bottom bracket is hand assembled using a hollow chromoly spindle, precision sealed bearings, forged and CNC-machined

alloy cups and a composite center spacer/seal. With a JIS square taper, they are available in 108- and

113-millimeter widths with black anodized cups. MSRP: $39.99

108mm-PX-BB13CM108: 246 grams/8.67 ounces113mm-PX-BB13CM113: 253 grams/8.92 ounces

ST-1 Square-Taper Bottom BracketEach ST-1 bottom bracket is hand assembled using a steel

spindle, sealed bearings, forged and CNC-machined alloy cups and a composite center spacer/seal.

The spindles have a JIS taper and are 113 millimeters wide. MSRP: $24.99

PX-BB13ST113-BK: 276 grams/9.76 ounces

C-1 Chain TensionersC-1 chain tensioners are extruded then CNC-machined from

6061-T6 aluminum for optimal strength and low weight. Two mounting holes ensure perfect adjustability on most frames. When used properly, they will protect your frame dropouts and help hold your rear wheel in place.

Available in anodized red, blue, gold and black with laser-etched graphics and stainless steel hardware. MSRP: $12.99

PX-CT1300PRO: 64 grams/2.25 ounces

C-2 Chain TensionersC-2 Chain Tensioners feature a minimalist design to keep the

weight as low as possible. Extruded and CNC-machined from 6061-T6 aluminum for optimal strength and low weight.

When used properly, they will protect your frame dropouts and help hold your rear wheel in place.

Available in anodized red, blue, gold and black with black hardware. C-2 Tensioners are intended to be used by smaller and lightweight riders. MSRP: $9.99

PX-CT1300MIN: 36 grams/1.26 ounces

IG-45 Integrated HeadsetUsed by Marc Willers, the IG-45

integrated headset features an aluminum cap, bearing cover and crown race with super-smooth rolling, precision 45x45 bearings.

Available in anodized red, blue, gold and black, in 1” and 1 1/8” sizes. MSRP: $39.99

1”-PX-HS1300IN1: 94 grams/3.31 ounces1 1/8”-PX-HS13IN118: 85 grams/2.99 ounces

PI-1 Alloy 45x45 Threadless HeadsetThe PI-1 Alloy 45x45 headset has an aluminum top cap, upper

bearing cover, lower race and upper and lower cups. All-aluminum construction results in a lightweight headset. Each headset is fitted with super-smooth rolling, precision, 45x45 angular-contact sealed bearings.

Because this versatile headset has 45x45 angular-contact bearings, you can use the included cups and install it in standard frames. Or, leave the cup in the box, and use it as an Integrated headset.

Available in anodized red, blue, gold and black, in 1” and 1 1/8” sizes. MSRP: $54.99

1”-PX-HS1300PI1: 120 grams/4.23 ounces1 1/8-PX-HS13PI118: 124 grams/4.37 ounces

PI-2 Threadless HeadsetThe PI-2 headset features

hybrid aluminum and steel construction. The top cap, upper bearing cover and lower race are CNC-machined from aluminum alloy while the cups are made from steel. This construction results in a high-quality headset at a lower cost. Each headset is fitted with smooth rolling, sealed, cartridge bearings.

Available in black with anodized red, blue, gold and black aluminum parts, in 1” and 1 1/8” sizes. MSRP: $29.99

1”-PX-HS1300P21: 152 grams/5.36 ounces1 1/8”-PX-HS13P2118: 165 grams/5.82 ounces

HA-1 Headset Adapters NEW HA-1 headset adapters

allow the use of standard 1” press-in headsets to fit inside frames with head tubes designed for 1 1/8” press-in head sets. Available in black only. MSRP: $19.99

PX-HS1418ADP-BK: TBD

SL-1 Stem LockCold forged and fully

CNC-machined from 7075 aluminum alloy, SL-1 stem locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube.

Available in red, blue, gold and black, in 1” and 1 1/8” sizes. MSRP: $29.99

1”-PX-SL1300001: 61 grams/2.15 ounces1 1/8”-PX-SL1300118: 72 grams/2.53 ounces

Stem Spacer KitsExtruded and CNC-machined from 6061-T6 aluminum, the

Promax stem spacers feature a design that is lightweight and good looking.

Sold in packs of five, including two 1-millimeter and one each 3-, 5- and 10-millimeter heights, the set provides spacing adjustments of 1 to 20 millimeters.

Available in anodized red, blue, gold and

black to fit 1” and 1 1/8” forks. MSRP: $9.99

1”-PX-SS13001KT: 8 grams/0.28 ounces1 1/8”-PX-SS13118KT: 11 grams/0.38 ounces

MX-85 Seatclamp NEWThe first multi-tasking seatclamp, the DP-1 clamp is designed

to be utilized with a remote dropper seatpost. This clever design is cold forged and CNC machined from 6061-T6 aluminum alloy to create a durable and dependable clamp.

Promax is the first to offer this functionality in a binder clamp. At 20 grams, this dropper post guide clamp is refined and lightweight, providing the clean routing a dropper post requires. Keep your cable secure and protected as this clamp routes and guides between the lever and post.

Available in 34.9 in anodized red, blue, gold and black with laser-etched graphics and stainless steel hardware. Meets or exceeds ENM standards. MSRP: $14.9934.9mm-PX-SC14DP349: 20 grams/0.75 ounces

QR-1 SeatclampQR-1 seatpost clamps are cold forged and CNC machined

from 6061-T6 aluminum alloy. The QR-1, as the name implies, has a quick release lever, making seat height adjustments a snap. Weighing just 30 grams/1.1 ounces in the 31.8 size, it’s as lightweight as it is tough.

The head of the lever and the face of the clamp are given a proprietary low-friction surface treatment that ensures smooth lever action for the life of the clamp without the need for a bushing.

Available in 31.8 and 34.9 sizes in anodized red, blue, gold and black with laser-etched graphics and stainless steel hardware. Meets or exceeds ENM standards. MSRP: $14.99

31.8mm-PX-SC130Q318: 27 grams/0.95 ounces34.9mm-PX-SC130Q349: 28 grams/0.98 ounces

FC-1 SeatclampCold forged and CNC

machined from 6061-T6 aluminum alloy, the FC-1 is tough, lightweight (A 31.8 clamp weighs about 16 grams/0.6 ounces.) and good looking.

Available in 31.8 and 25.4 sizes in anodized red, blue, gold and black with laser-etched graphics and stainless steel hardware. Meets or exceeds ENM standards. MSRP: $11.99

25.4mm-PX-SC130F254: 14 grams/0.49 ounces31.8mm-PX-SC130F318: 17 grams/0.59 ounces

QR-2 Quick Release SkewersQR-2 QR skewers have cold forged levers for strength and

low weight. The chromoly shafts measure 112 millimeters for the front and 149 millimeters for the rear. They weigh 101 grams/3.6 ounces per set.

Available with red, blue, gold and black anodized levers and nuts. Meets or exceeds ENR standards. MSRP: $39.99

PX-QR13QR357: 96 grams/3.38 ounces

SP-1 Seatpost NEW SIZESThe SP-1 seatpost is made using lightweight, 2014, aluminum

alloy tubing and a cold forged, aluminum, alloy head. The two-bolt head design ensures solid seat positioning and plenty of adjustability. Each post has 20 millimeters of setback and 26 degrees of seat angle adjustment.

Available in anodized red, blue, gold and black with laser etched graphics. Available in 26.8, 27.2 and 31.6 diameters, the posts are 400 millimeters long, so they also work great as a warm-up/cool-down post, or cut it for racing. Be sure to recycle the unused post material.

Meets or exceeds ENM standards. MSRP: $49.99

26.8mm-PX-SP14SB268: TBD27.2mm-PX-SP13SB272: 256 grams/9.03 ounces31.6mm-PX-SP14SB316: TBD

Rusty Nesvig National Number 1 Amateur & Factory Haro/Promax Rider

PHO

TO B

Y MIK

E CA

RR

RU

TH

11 Expert and 11-Consecutive National Winner Spencer Cole of Factory DK Bicycles wins with Promax CF-2 cranks and IG-45 headsets.

PHO

TO B

Y M

IKE

CA

RR

RU

TH

Promax Components Are Designed and Distributed By:Cycle Group Inc., 1580 N. Orangethorpe Way, Anaheim, California 92801 USA

Toll Free: (888) 279-9691 Tel: (714) 449-9197 Fax: (714) 449-9337 Email: Info@CycleGroupInc.comWeb: www.promaxcomponents.com Facebook: facebook.com/PromaxComponents