8/3/2019 Project Vikaris 2009

1/37

Odie Kotesoc284C85-1000-0805-0001-4036-AK12-234X

Windows XP 5.1IA32WinAspi: -

ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

NT-SPTI usedNero Version: 7.2.3.3Internal Version: 7, 2, 3, 3(Nero Express)Recorder: Version: 6A11 - HA 1 TA 0 - 7.2.3.3Adapter driver: HA 1Drive buffer : 2048kBBus Type : via Inquiry data (1) -> ATAPI, detected: ?

Connected to MMC as unknown drive with class-nr : 1Drive is autodetected - recorder class: Std. MMC recorderCD-ROM: Version: 6A11 - HA 1 TA 0 - 7.2.3.3Adapter driver: HA 1

=== Scsi-Device-Map ===DiskPeripheral : Hitachi HTS543216L9A300 atapi Port 0 ID 0 DMA:OnCdRomPeripheral : Slimtype DVD A DS8A2S atapi Port 1 ID 0 DMA:Off

=== CDRom-Device-Map ===

Slimtype DVD A DS8A2S F: CDRom0=======================

AutoRun : 1Excluded drive IDs:WriteBufferSize: 83886080 (0) ByteBUFE : 0Physical memory : 953MB (976836kB)Free physical memory: 410MB (420632kB)Memory in use : 56 %Uncached PFiles: 0x0Use Inquiry : 1

Global Bus Type: default (0)Check supported media : Disabled (0)

24.6.2011===== Disc-Copy over image - 1st step : Copy to image ...

7:22:11 PM #1 Text 0 File SCSIPassThrough.cpp, Line 39SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:22:11 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531ReadBuffer-Pipe got 192KB of Memory

7:22:11 PM #3 Text 0 File Reader.cpp, Line 124

Reader running

7:22:11 PM #4 Text 0 File Writer.cpp, Line 113

8/3/2019 Project Vikaris 2009

2/37

Writer Image Recorder running

7:22:11 PM #5 Phase 48 File dlgbrnst.cpp, Line 1730Analyzing disc

7:22:12 PM #6 CDCOPY -1 File CDCopy.cpp, Line 1915The CD is copyrighted

7:22:14 PM #7 Text 0 File CDCopy.cpp, Line 2131_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_

Track 1: 0 0 ( 0:02.00) 600 599 ( 0:09.74)Track 2: 600 750 ( 0:12.00) 44085 44084 ( 9:49.59)Track 3: 44085 44235 ( 9:51.60) 85709 85708 ( 19:04.58)

7:22:14 PM #8 Text 0 File CDCopy.cpp, Line 840Copy options: copy on-the-fly: ON

read ISRC/MCN: OFFuse jitter correction: OFFdata options

ignore read error: ON write defekt blocks OFFread raw data: OFF read r-w subchannel data: OFFaudio options

ignore read error: ONread indexes: OFF read r-w subchannel data: OFF

source disc does not look like CD Extra01. 0 - 750 = 750, data (TRM_DATA_RAW_MODE2, block size 2352)02. 750 - 44235 = 43485, data (TRM_DATA_RAW_MODE2, block size 2352)03. 44235 - 85709 = 41474, data (TRM_DATA_RAW_MODE2, block size 2352)

7:22:14 PM #9 Text 0 File Burncd.cpp, Line 3400Turn on Disc-At-Once, using CD-R/RW media

7:22:14 PM #10 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 445499 ( 99:01.74)Last address to be written: 85708 ( 19:04.58)

7:22:14 PM #11 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

7:22:14 PM #12 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities: TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 43335 blocks [Image Recorder]

2: TRM_DATA_MODE2_2336 (3 - Data (mode 2))

8/3/2019 Project Vikaris 2009

3/37

2 indices, index0 (150) not providedoriginal disc pos #44235 + 41474 (41474) = #85709/19:2.59not relocatable, disc pos for caching/writing not required/not requi

red, no patch infos-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, leng

th 41474 blocks [Image Recorder]--------------------------------------------------------------

7:22:14 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1059Prepare recorder [Image Recorder] for write in CUE-sheet-DAODAO infos:==========MCN: ""TOCType: 0x20; Session Closed, disc fixatedTracks 1 to 3:1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 35040

0 1752000, ISRC ""2: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 1752000 210240

0 103332960, ISRC ""

3: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 103332960 103683360 200566624, ISRC ""DAO layout:===========__Start_____Track__Idx__CtrlAdr__RecDep__________

-150 lead-in 0 0x41 0x00-150 1 0 0x41 0x00

0 1 1 0x41 0x00600 2 0 0x41 0x00750 2 1 0x41 0x00

44085 3 0 0x41 0x0044235 3 1 0x41 0x0085709 lead-out 1 0x41 0x00

7:22:14 PM #15 Phase 120 File dlgbrnst.cpp, Line 1730Creating the image for burning

7:22:14 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

7:22:14 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

7:22:14 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

7:24:02 PM #19 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh), length 0

blocks

7:24:02 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228all writers idle, stopping conversion

7:24:02 PM #21 Phase 121 File dlgbrnst.cpp, Line 1730Creating Image completed successfully

8/3/2019 Project Vikaris 2009

4/37

===== Disc-Copy over image - 2nd step : Burn the image ...

7:24:07 PM #1 Text 0 File Burncd.cpp, Line 3086Slimtype DVD A DS8A2SSMART-BURN activated

7:24:07 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531

ReadBuffer-Pipe got 81920KB of Memory

7:24:07 PM #3 Text 0 File Reader.cpp, Line 124Reader running

7:24:07 PM #4 Text 0 File Writer.cpp, Line 113Writer F: Slimtype DVD A DS8A2S running

7:24:07 PM #5 IMAGEGEN -10 File ImageGen.cpp, Line 366Image was written as DAO.DAOI:MediaCatalogNumber = ''

TocType = 0x20Finalized = 1First/Last Track = 1 / 31: ISRC = ''

Blocksize = 2336TrackMode = 'TRM_DATA_MODE2_2336'TrackConfig = 0x00First/Last Index = 0 / 1Index0FilePos = 0, Index1FilePos = 350400, NextTrackFilePos = 17520

002: ISRC = ''

Blocksize = 2336TrackMode = 'TRM_DATA_MODE2_2336'

TrackConfig = 0x00First/Last Index = 0 / 1Index0FilePos = 1752000, Index1FilePos = 2102400, NextTrackFilePos

= 1033329603: ISRC = ''

Blocksize = 2336TrackMode = 'TRM_DATA_MODE2_2336'TrackConfig = 0x00First/Last Index = 0 / 1Index0FilePos = 103332960, Index1FilePos = 103683360, NextTrackFile

Pos = 200566624CUES:

0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00

1: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00

2: Ctrl=0x41 Trk= 2 (0x02) Index=01 Start=00:10.00 ( 750) RecDep=0x00

3: Ctrl=0x41 Trk= 3 (0x03) Index=01 Start=09:49.60 ( 44235) RecDep=0x00

MTYP: Mediumtype = CD (old format) (0x1)Image file name:

7:24:07 PM #6 Text 0 File Burncd.cpp, Line 3400

Turn on Disc-At-Once, using CD-R/RW media

7:24:54 PM #7 Text 0 File DlgWaitCD.cpp, Line 290

8/3/2019 Project Vikaris 2009

5/37

Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

7:24:54 PM #8 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

7:24:54 PM #9 Text 0 File DlgWaitCD.cpp, Line 2733

Recorder: Slimtype DVD A DS8A2S

7:24:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities: TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, lengt

h 43335 blocks [F: Slimtype DVD A DS8A2S]

2: TRM_DATA_MODE2_2336 (3 - CD-ROM Mode 2/XA, CD-ROM Mode 1)2 indices, index0 (150) providedoriginal disc pos #44235 + 41474 (41474) = #85709/19:2.59not relocatable, disc pos for caching/writing not required/not requi

red, no patch infos-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, lengt

h 41474 blocks [F: Slimtype DVD A DS8A2S]--------------------------------------------------------------

7:24:54 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059Prepare recorder [F: Slimtype DVD A DS8A2S] for write in CUE-sheet-DAODAO infos:==========MCN: ""TOCType: 0x20; Session Closed, disc fixatedTracks 1 to 3:1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800

1764000, ISRC ""2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1764000 2116800

104040720, ISRC ""3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 104040720 104393520

201940368, ISRC ""DAO layout:===========__Start_____Track__Idx__CtrlAdr__RecDep__________

-150 lead-in 0 0x41 0x00-150 1 0 0x41 0x00

0 1 1 0x41 0x00

8/3/2019 Project Vikaris 2009

6/37

600 2 0 0x41 0x00750 2 1 0x41 0x00

44085 3 0 0x41 0x0044235 3 1 0x41 0x0085709 lead-out 1 0x41 0x00

7:24:54 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39

SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:24:54 PM #14 Phase 36 File dlgbrnst.cpp, Line 1730Burn process started at 24x (3,600 KB/s)

7:24:54 PM #15 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02

Buffer x035b1000: Len x4000

7:24:54 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

7:24:54 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

7:24:54 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

7:24:54 PM #19 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

7:24:55 PM #20 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

7:24:55 PM #21 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 0041 01 01 21 00 00 02 0041 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

7:27:13 PM #22 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

7:27:13 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228all writers idle, stopping conversion

7:27:27 PM #24 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

8/3/2019 Project Vikaris 2009

7/37

7:28:05 PM #25 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

7:28:05 PM #26 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

7:28:05 PM #27 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

7:28:05 PM #28 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

8/37

7:28:05 PM #34 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

7:28:05 PM #35 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

7:28:05 PM #36 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

7:28:05 PM #37 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

7:28:06 PM #38 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 00

41 01 01 21 00 00 02 0041 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

7:30:24 PM #39 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

7:30:24 PM #40 Text 0 File ThreadedTransfer.cpp, Line 228all writers idle, stopping conversion

7:30:38 PM #41 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

7:31:16 PM #42 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

7:31:16 PM #43 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

7:31:16 PM #44 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

7:31:16 PM #45 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

9/37

1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 3528001764000, ISRC ""

2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1764000 2116800104040720, ISRC ""

3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 104040720 104393520201940368, ISRC ""

DAO layout:

===========__Start_____Track__Idx__CtrlAdr__RecDep__________

-150 lead-in 0 0x41 0x00-150 1 0 0x41 0x00

0 1 1 0x41 0x00600 2 0 0x41 0x00750 2 1 0x41 0x00

44085 3 0 0x41 0x0044235 3 1 0x41 0x0085709 lead-out 1 0x41 0x00

7:31:16 PM #47 Text 0 File SCSIPassThrough.cpp, Line 39

SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:31:16 PM #48 Phase 36 File dlgbrnst.cpp, Line 1730Burn process started at 24x (3,600 KB/s)

7:31:16 PM #49 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02Buffer x035b8600: Len x4000

7:31:16 PM #50 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

7:31:16 PM #51 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

7:31:16 PM #52 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

7:31:16 PM #53 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

7:31:16 PM #54 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

7:31:17 PM #55 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 0041 01 01 21 00 00 02 0041 02 00 21 00 00 0a 00

41 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c

8/3/2019 Project Vikaris 2009

10/37

41 aa 01 34 00 13 04 3b

7:33:35 PM #56 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

7:33:35 PM #57 Text 0 File ThreadedTransfer.cpp, Line 228

all writers idle, stopping conversion

7:33:49 PM #58 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

7:34:27 PM #59 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

7:34:27 PM #60 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

7:34:27 PM #61 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

7:34:27 PM #62 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

11/37

7:34:27 PM #66 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02

Buffer x035b8600: Len x4000

7:34:27 PM #67 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

7:34:27 PM #68 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

7:34:27 PM #69 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

7:34:27 PM #70 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

7:34:27 PM #71 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

7:34:28 PM #72 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 0041 01 01 21 00 00 02 00

41 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

7:36:46 PM #73 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

7:36:46 PM #74 Text 0 File ThreadedTransfer.cpp, Line 228all writers idle, stopping conversion

7:37:00 PM #75 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

7:37:38 PM #76 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

7:37:38 PM #77 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

7:37:38 PM #78 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

7:37:38 PM #79 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

12/37

=========================================Insert empty disc to write to.

(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

7:37:38 PM #80 Text 0 File ThreadedTransferInterface.cpp, Line 1059Prepare recorder [F: Slimtype DVD A DS8A2S] for write in CUE-sheet-DAO

DAO infos:==========MCN: ""TOCType: 0x20; Session Closed, disc fixatedTracks 1 to 3:1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800

1764000, ISRC ""2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1764000 2116800

104040720, ISRC ""3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 104040720 104393520

201940368, ISRC ""DAO layout:

===========__Start_____Track__Idx__CtrlAdr__RecDep__________-150 lead-in 0 0x41 0x00-150 1 0 0x41 0x00

0 1 1 0x41 0x00600 2 0 0x41 0x00750 2 1 0x41 0x00

44085 3 0 0x41 0x0044235 3 1 0x41 0x0085709 lead-out 1 0x41 0x00

7:37:38 PM #81 Text 0 File SCSIPassThrough.cpp, Line 39SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:37:38 PM #82 Phase 36 File dlgbrnst.cpp, Line 1730Burn process started at 24x (3,600 KB/s)

7:37:38 PM #83 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02Buffer x035c1200: Len x4000

7:37:38 PM #84 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

7:37:38 PM #85 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

7:37:38 PM #86 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

7:37:38 PM #87 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

8/3/2019 Project Vikaris 2009

13/37

7:37:38 PM #88 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

7:37:39 PM #89 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 00

41 01 01 21 00 00 02 0041 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

7:39:57 PM #90 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

7:39:57 PM #91 Text 0 File ThreadedTransfer.cpp, Line 228

all writers idle, stopping conversion

7:40:11 PM #92 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

7:40:49 PM #93 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

7:40:49 PM #94 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

7:40:49 PM #95 Text 0 File DlgWaitCD.cpp, Line 2733

Recorder: Slimtype DVD A DS8A2S

7:40:49 PM #96 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

14/37

600 2 0 0x41 0x00750 2 1 0x41 0x00

44085 3 0 0x41 0x0044235 3 1 0x41 0x0085709 lead-out 1 0x41 0x00

7:40:49 PM #98 Text 0 File SCSIPassThrough.cpp, Line 39

SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:40:49 PM #99 Phase 36 File dlgbrnst.cpp, Line 1730Burn process started at 24x (3,600 KB/s)

7:40:49 PM #100 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02

Buffer x035c3600: Len x4000

7:40:49 PM #101 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

7:40:49 PM #102 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

7:40:49 PM #103 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

7:40:49 PM #104 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

7:40:49 PM #105 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

7:40:50 PM #106 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 0041 01 01 21 00 00 02 0041 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

7:43:10 PM #107 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

7:43:10 PM #108 Text 0 File ThreadedTransfer.cpp, Line 228all writers idle, stopping conversion

7:43:25 PM #109 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

8/3/2019 Project Vikaris 2009

15/37

7:44:03 PM #110 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

7:44:03 PM #111 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

7:44:03 PM #112 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

7:44:03 PM #113 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

16/37

7:44:03 PM #119 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

7:44:03 PM #120 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

7:44:03 PM #121 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

7:44:03 PM #122 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

7:44:04 PM #123 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 00

41 01 01 21 00 00 02 0041 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

7:46:23 PM #124 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

7:46:24 PM #125 Text 0 File ThreadedTransfer.cpp, Line 228all writers idle, stopping conversion

7:46:38 PM #126 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

7:47:15 PM #127 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

7:47:15 PM #128 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

7:47:15 PM #129 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

7:47:15 PM #130 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

17/37

1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 3528001764000, ISRC ""

2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1764000 2116800104040720, ISRC ""

3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 104040720 104393520201940368, ISRC ""

DAO layout:

===========__Start_____Track__Idx__CtrlAdr__RecDep__________

-150 lead-in 0 0x41 0x00-150 1 0 0x41 0x00

0 1 1 0x41 0x00600 2 0 0x41 0x00750 2 1 0x41 0x00

44085 3 0 0x41 0x0044235 3 1 0x41 0x0085709 lead-out 1 0x41 0x00

7:47:15 PM #132 Text 0 File SCSIPassThrough.cpp, Line 39

SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:47:15 PM #133 Phase 36 File dlgbrnst.cpp, Line 1730Burn process started at 24x (3,600 KB/s)

7:47:15 PM #134 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02Buffer x035cb000: Len x4000

7:47:15 PM #135 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

7:47:15 PM #136 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

7:47:15 PM #137 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

7:47:15 PM #138 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

7:47:15 PM #139 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

7:47:16 PM #140 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 0041 01 01 21 00 00 02 0041 02 00 21 00 00 0a 00

41 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c

8/3/2019 Project Vikaris 2009

18/37

41 aa 01 34 00 13 04 3b

7:49:34 PM #141 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

7:49:34 PM #142 Text 0 File ThreadedTransfer.cpp, Line 228

all writers idle, stopping conversion

7:49:48 PM #143 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

7:50:26 PM #144 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

7:50:26 PM #145 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

7:50:26 PM #146 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

7:50:26 PM #147 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

19/37

7:50:26 PM #151 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02

Buffer x035d0000: Len x4000

7:50:26 PM #152 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

7:50:26 PM #153 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

7:50:26 PM #154 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

7:50:26 PM #155 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

7:50:26 PM #156 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

7:50:27 PM #157 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 0041 01 01 21 00 00 02 00

41 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

7:52:45 PM #158 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

7:52:45 PM #159 Text 0 File ThreadedTransfer.cpp, Line 228all writers idle, stopping conversion

7:52:59 PM #160 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

7:53:49 PM #161 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

7:53:49 PM #162 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

7:53:49 PM #163 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

7:53:49 PM #164 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

20/37

=========================================Insert empty disc to write to.

(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

7:53:49 PM #165 Text 0 File ThreadedTransferInterface.cpp, Line 1059Prepare recorder [F: Slimtype DVD A DS8A2S] for write in CUE-sheet-DAO

DAO infos:==========MCN: ""TOCType: 0x20; Session Closed, disc fixatedTracks 1 to 3:1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800

1764000, ISRC ""2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1764000 2116800

104040720, ISRC ""3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 104040720 104393520

201940368, ISRC ""DAO layout:

===========__Start_____Track__Idx__CtrlAdr__RecDep__________-150 lead-in 0 0x41 0x00-150 1 0 0x41 0x00

0 1 1 0x41 0x00600 2 0 0x41 0x00750 2 1 0x41 0x00

44085 3 0 0x41 0x0044235 3 1 0x41 0x0085709 lead-out 1 0x41 0x00

7:53:49 PM #166 Text 0 File SCSIPassThrough.cpp, Line 39SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:53:49 PM #167 Phase 36 File dlgbrnst.cpp, Line 1730Burn process started at 24x (3,600 KB/s)

7:53:49 PM #168 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02Buffer x035d5000: Len x4000

7:53:49 PM #169 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

7:53:49 PM #170 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

7:53:49 PM #171 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

7:53:49 PM #172 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

8/3/2019 Project Vikaris 2009

21/37

7:53:49 PM #173 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

7:53:50 PM #174 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 00

41 01 01 21 00 00 02 0041 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

7:56:08 PM #175 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

7:56:08 PM #176 Text 0 File ThreadedTransfer.cpp, Line 228

all writers idle, stopping conversion

7:56:22 PM #177 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

7:57:00 PM #178 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

7:57:00 PM #179 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

7:57:00 PM #180 Text 0 File DlgWaitCD.cpp, Line 2733

Recorder: Slimtype DVD A DS8A2S

7:57:00 PM #181 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

22/37

600 2 0 0x41 0x00750 2 1 0x41 0x00

44085 3 0 0x41 0x0044235 3 1 0x41 0x0085709 lead-out 1 0x41 0x00

7:57:00 PM #183 Text 0 File SCSIPassThrough.cpp, Line 39

SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:57:00 PM #184 Phase 36 File dlgbrnst.cpp, Line 1730Burn process started at 24x (3,600 KB/s)

7:57:00 PM #185 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02

Buffer x051ae200: Len x4000

7:57:00 PM #186 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

7:57:00 PM #187 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

7:57:00 PM #188 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

7:57:00 PM #189 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

7:57:00 PM #190 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

7:57:01 PM #191 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 0041 01 01 21 00 00 02 0041 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

7:59:19 PM #192 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

7:59:19 PM #193 Text 0 File ThreadedTransfer.cpp, Line 228all writers idle, stopping conversion

7:59:33 PM #194 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

8/3/2019 Project Vikaris 2009

23/37

8:00:23 PM #195 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

8:00:23 PM #196 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

8:00:23 PM #197 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

8:00:23 PM #198 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

24/37

8:00:23 PM #204 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

8:00:23 PM #205 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

8:00:23 PM #206 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

8:00:23 PM #207 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

8:00:24 PM #208 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 00

41 01 01 21 00 00 02 0041 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

8:02:42 PM #209 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

8:02:42 PM #210 Text 0 File ThreadedTransfer.cpp, Line 228all writers idle, stopping conversion

8:02:57 PM #211 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

8:03:35 PM #212 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

8:03:35 PM #213 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

8:03:35 PM #214 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

8:03:35 PM #215 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

25/37

1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 3528001764000, ISRC ""

2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1764000 2116800104040720, ISRC ""

3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 104040720 104393520201940368, ISRC ""

DAO layout:

===========__Start_____Track__Idx__CtrlAdr__RecDep__________

-150 lead-in 0 0x41 0x00-150 1 0 0x41 0x00

0 1 1 0x41 0x00600 2 0 0x41 0x00750 2 1 0x41 0x00

44085 3 0 0x41 0x0044235 3 1 0x41 0x0085709 lead-out 1 0x41 0x00

8:03:35 PM #217 Text 0 File SCSIPassThrough.cpp, Line 39

SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:03:35 PM #218 Phase 36 File dlgbrnst.cpp, Line 1730Burn process started at 24x (3,600 KB/s)

8:03:35 PM #219 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02Buffer x051b4000: Len x4000

8:03:35 PM #220 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

8:03:35 PM #221 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

8:03:35 PM #222 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

8:03:35 PM #223 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

8:03:36 PM #224 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

8:03:36 PM #225 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 0041 01 01 21 00 00 02 0041 02 00 21 00 00 0a 00

41 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c

8/3/2019 Project Vikaris 2009

26/37

41 aa 01 34 00 13 04 3b

8:05:56 PM #226 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

8:05:56 PM #227 Text 0 File ThreadedTransfer.cpp, Line 228

all writers idle, stopping conversion

8:06:10 PM #228 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

8:06:50 PM #229 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

8:06:50 PM #230 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

8:06:50 PM #231 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

8:06:50 PM #232 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

27/37

8:06:50 PM #236 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02

Buffer x051b9000: Len x4000

8:06:50 PM #237 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

8:06:50 PM #238 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

8:06:50 PM #239 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

8:06:50 PM #240 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

8:06:50 PM #241 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

8:06:50 PM #242 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 0041 01 01 21 00 00 02 00

41 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

8:09:18 PM #243 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

8:09:18 PM #244 Text 0 File ThreadedTransfer.cpp, Line 228all writers idle, stopping conversion

8:09:33 PM #245 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

8:10:01 PM #246 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

8:10:01 PM #247 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

8:10:01 PM #248 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

8:10:01 PM #249 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

28/37

=========================================Insert empty disc to write to.

(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

8:10:01 PM #250 Text 0 File ThreadedTransferInterface.cpp, Line 1059Prepare recorder [F: Slimtype DVD A DS8A2S] for write in CUE-sheet-DAO

DAO infos:==========MCN: ""TOCType: 0x20; Session Closed, disc fixatedTracks 1 to 3:1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800

1764000, ISRC ""2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1764000 2116800

104040720, ISRC ""3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 104040720 104393520

201940368, ISRC ""DAO layout:

===========__Start_____Track__Idx__CtrlAdr__RecDep__________-150 lead-in 0 0x41 0x00-150 1 0 0x41 0x00

0 1 1 0x41 0x00600 2 0 0x41 0x00750 2 1 0x41 0x00

44085 3 0 0x41 0x0044235 3 1 0x41 0x0085709 lead-out 1 0x41 0x00

8:10:01 PM #251 Text 0 File SCSIPassThrough.cpp, Line 39SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:10:02 PM #252 Phase 36 File dlgbrnst.cpp, Line 1730Burn process started at 24x (3,600 KB/s)

8:10:02 PM #253 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02Buffer x051bb400: Len x4000

8:10:02 PM #254 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

8:10:02 PM #255 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

8:10:02 PM #256 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

8:10:02 PM #257 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

8/3/2019 Project Vikaris 2009

29/37

8:10:02 PM #258 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

8:10:02 PM #259 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 00

41 01 01 21 00 00 02 0041 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

8:12:24 PM #260 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

8:12:24 PM #261 Text 0 File ThreadedTransfer.cpp, Line 228

all writers idle, stopping conversion

8:12:38 PM #262 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

8:13:40 PM #263 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

8:13:40 PM #264 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

8:13:40 PM #265 Text 0 File DlgWaitCD.cpp, Line 2733

Recorder: Slimtype DVD A DS8A2S

8:13:40 PM #266 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

30/37

600 2 0 0x41 0x00750 2 1 0x41 0x00

44085 3 0 0x41 0x0044235 3 1 0x41 0x0085709 lead-out 1 0x41 0x00

8:13:40 PM #268 Text 0 File SCSIPassThrough.cpp, Line 39

SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:13:41 PM #269 Phase 36 File dlgbrnst.cpp, Line 1730Burn process started at 24x (3,600 KB/s)

8:13:41 PM #270 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02

Buffer x051bee00: Len x4000

8:13:41 PM #271 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

8:13:41 PM #272 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

8:13:41 PM #273 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

8:13:41 PM #274 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

8:13:41 PM #275 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

8:13:42 PM #276 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 0041 01 01 21 00 00 02 0041 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

8:16:03 PM #277 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

8:16:03 PM #278 Text 0 File ThreadedTransfer.cpp, Line 228all writers idle, stopping conversion

8:16:17 PM #279 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

8/3/2019 Project Vikaris 2009

31/37

8:17:07 PM #280 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

8:17:07 PM #281 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

8:17:07 PM #282 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

8:17:07 PM #283 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

32/37

8:17:08 PM #289 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

8:17:08 PM #290 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

8:17:08 PM #291 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

8:17:08 PM #292 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

8:17:09 PM #293 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 00

41 01 01 21 00 00 02 0041 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

8:19:30 PM #294 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

8:19:30 PM #295 Text 0 File ThreadedTransfer.cpp, Line 228all writers idle, stopping conversion

8:19:44 PM #296 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

8:20:22 PM #297 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

8:20:22 PM #298 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

8:20:22 PM #299 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

8:20:22 PM #300 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

33/37

1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 3528001764000, ISRC ""

2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1764000 2116800104040720, ISRC ""

3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 104040720 104393520201940368, ISRC ""

DAO layout:

===========__Start_____Track__Idx__CtrlAdr__RecDep__________

-150 lead-in 0 0x41 0x00-150 1 0 0x41 0x00

0 1 1 0x41 0x00600 2 0 0x41 0x00750 2 1 0x41 0x00

44085 3 0 0x41 0x0044235 3 1 0x41 0x0085709 lead-out 1 0x41 0x00

8:20:22 PM #302 Text 0 File SCSIPassThrough.cpp, Line 39

SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:20:23 PM #303 Phase 36 File dlgbrnst.cpp, Line 1730Burn process started at 24x (3,600 KB/s)

8:20:23 PM #304 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02Buffer x051c8000: Len x4000

8:20:23 PM #305 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

8:20:23 PM #306 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

8:20:23 PM #307 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

8:20:23 PM #308 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

8:20:23 PM #309 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

8:20:24 PM #310 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 0041 01 01 21 00 00 02 0041 02 00 21 00 00 0a 00

41 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c

8/3/2019 Project Vikaris 2009

34/37

41 aa 01 34 00 13 04 3b

8:22:45 PM #311 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

8:22:45 PM #312 Text 0 File ThreadedTransfer.cpp, Line 228

all writers idle, stopping conversion

8:22:59 PM #313 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

8:23:37 PM #314 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

8:23:37 PM #315 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

8:23:37 PM #316 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

8:23:37 PM #317 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

35/37

8:23:38 PM #321 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02

Buffer x051cb400: Len x4000

8:23:38 PM #322 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

8:23:38 PM #323 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

8:23:38 PM #324 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

8:23:38 PM #325 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

8:23:39 PM #326 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

8:23:39 PM #327 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 0041 01 01 21 00 00 02 00

41 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

8:26:09 PM #328 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

8:26:09 PM #329 Text 0 File ThreadedTransfer.cpp, Line 228all writers idle, stopping conversion

8:26:23 PM #330 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

8:26:52 PM #331 Text 0 File DlgWaitCD.cpp, Line 290Last possible write address on media: 359845 ( 79:59.70)Last address to be written: 85708 ( 19:04.58)

8:26:52 PM #332 Text 0 File DlgWaitCD.cpp, Line 302Write in overburning mode: NO (enabled: CD)

8:26:52 PM #333 Text 0 File DlgWaitCD.cpp, Line 2733Recorder: Slimtype DVD A DS8A2S

8:26:52 PM #334 Text 0 File DlgWaitCD.cpp, Line 474>>> Protocol of DlgWaitCD activities:

8/3/2019 Project Vikaris 2009

36/37

=========================================Insert empty disc to write to.

(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

8:26:52 PM #335 Text 0 File ThreadedTransferInterface.cpp, Line 1059Prepare recorder [F: Slimtype DVD A DS8A2S] for write in CUE-sheet-DAO

DAO infos:==========MCN: ""TOCType: 0x20; Session Closed, disc fixatedTracks 1 to 3:1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800

1764000, ISRC ""2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1764000 2116800

104040720, ISRC ""3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 104040720 104393520

201940368, ISRC ""DAO layout:

===========__Start_____Track__Idx__CtrlAdr__RecDep__________-150 lead-in 0 0x41 0x00-150 1 0 0x41 0x00

0 1 1 0x41 0x00600 2 0 0x41 0x00750 2 1 0x41 0x00

44085 3 0 0x41 0x0044235 3 1 0x41 0x0085709 lead-out 1 0x41 0x00

8:26:52 PM #336 Text 0 File SCSIPassThrough.cpp, Line 39SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:26:53 PM #337 Phase 36 File dlgbrnst.cpp, Line 1730Burn process started at 24x (3,600 KB/s)

8:26:53 PM #338 SPTI -1189 File SCSIPassThrough.cpp, Line 291F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)Sense Code: 0x30Sense Qual: 0x02CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02Buffer x051d2000: Len x4000

8:26:53 PM #339 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 0 (not relocatable, no disc pos, no patc

h infos, orig at #0): write at #0

8:26:53 PM #340 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 1 (not relocatable, no disc pos, no patc

h infos, orig at #750): write at #750

8:26:53 PM #341 Text 0 File ThreadedTransferInterface.cpp, Line 2707Verifying disc position of item 2 (not relocatable, no disc pos, no patc

h infos, orig at #44235): write at #44235

8:26:53 PM #342 Text 0 File MMC.cpp, Line 17401StartDAO : CD-Text - Off

8/3/2019 Project Vikaris 2009

37/37

8:26:53 PM #343 Text 0 File MMC.cpp, Line 22035Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

8:26:53 PM #344 Text 0 File MMC.cpp, Line 17629CueData, Len=6441 00 00 34 00 00 00 0041 01 00 21 00 00 00 00

41 01 01 21 00 00 02 0041 02 00 21 00 00 0a 0041 02 01 21 00 00 0c 0041 03 00 21 00 09 31 3c41 03 01 21 00 09 33 3c41 aa 01 34 00 13 04 3b

8:29:15 PM #345 Text 0 File WriterStatus.cpp, Line 116 start writing Lead-Out at LBA 85709 (14ECDh)

, length 0 blocks

8:29:15 PM #346 Text 0 File ThreadedTransfer.cpp, Line 228

all writers idle, stopping conversion

8:29:29 PM #347 Phase 37 File dlgbrnst.cpp, Line 1730Burn process completed successfully at 24x (3,600 KB/s)

Existing drivers:File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9200 bytes, created 8/1/2008 5:17:04 AMFile 'Drivers\PXHELP20.SYS': Ver=3.00.67a, size=43872 bytes, created 8/1/2008 5:17:04 AM (Prassi/Veritas driver for win 2K)

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)