PROJECT : SUPPLY AND INSTALLATION OF VENTILATION …

PROJECT : SUPPLY AND INSTALLATION OF VENTILATION SYSTEM

AND MISCELLANEOUS WORKS

LOCATION : College of Dentistry

University of the Philippines Manila

SUBJECT : BIDFORM

1.00 GENERAL REQUIREMENTS

Mobilization and Demobilization 1.00 lot

Scaffolding, warehouse, board ups, canvass/temporary covering and

safety signages

1.00 lot

Permits and Clearances 1.00 lot

Health and Safety ( PPE, Medkit, Medical check-up/testing as required

for new normal etc.)

1.00 lot

TOTAL GENERAL REQUIREMENTS

2.00 ARCHITECTURAL WORKS

PROSTHODONIC CLINIC

3.56 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized

frame (in 2 panels aligned with boundary/divisions)) complete with

fixing accessories and additional supports including installation cost

2.00 set/s

1.85m x 0.6m x 6mm thick tempered clear glass on aluminum anonized

frame complete with fixing accessories and additional supports.

5.00 set/s



3.00 set/s



8.00 set/s

Sub Total Cost

ORTHO CLINIC


frame (in 3 panels aligned with boundary/divisions) complete with

fixing accessories and additional supports.

1.00 set/s




1.00 set/s




2.00 set/s

ITEM DESCRIPTION QTY. UNIT UNIT COST TOTAL COST

BID FORM 1 of 26



10.00 set/s

Sub Total Cost

RESTORATIVE CLINIC




1.00 set/s




3.00 set/s




1.00 set/s



3.00 set/s



4.00 set/s



13.00 set/s

Sub Total Cost

ORAL MEDICAL CLINIC




1.00 set/s




2.00 set/s




1.00 set/s




1.00 set/s




1.00 set/s




1.00 set/s




1.00 set/s



3.00 set/s



16.00 set/s



1.00 set/s



1.00 set/s

Sub Total Cost

BID FORM 2 of 26

OS CLINIC



2.00 set/s



6.00 set/s

Sub Total Cost

CLINIC



3.00 set/s



1.00 set/s

Sub Total Cost

Restoration of architectural, electrical, plumbing and other trade affected

in the installation process of ducting, airconditions, exhaust, electrical

and the architecural works of the project.

1.00 lot

Demolition and dismantling of ceiling and removal of existing

decommissioned ducting

1.00 lot

Supply and installation of 1/2" thick gypsum board drop ceiling to

traverse duct across beam including painting

1.00 lot

Additional double panel metal louver door including demolition of CHB

wall and locking accessories for Gen Set Room

1.00 set

Sub Total Cost

TOTAL ARCHITECTURAL WORKS

3.00 AIRCONDITIONING SYSTEM

BIO-CHEM LABORATORY/PRE-CLINICAL LABORATORY

Equipment

2.5HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a

refrigerant, 3/60/220, with wired controller

1.00 unit/s



2.00 unit/s



1.00 unit/s

Copper pipe and fittings

Copper Pipe Ø5/8" Hard Drawn Type L, 20' 10.00 length


Rubber Insulation Ø5/8" x 3/4" x 6' 34.00 pc/s


Polyethylene Tape 4.00 roll/s

Copper elbow Ø3/8" LR 24.00 pc/s


Copper coupling Ø3/8" 10.00 pc/s


BID FORM 3 of 26

Condensate Drain

PVC Pipe Ø3/4" x 10' 12.00 length


PVC elbow Ø3/4" 12.00 pc/s

PVC tee reducer Ø3/4" x 2" x 2" 2.00 pc/s

PVC tee Ø3/4" 4.00 pc/s

PVC tee Ø3/4" (threaded) 4.00 pc/s

PVC coupling Ø3/4" 4.00 pc/s

PVC end plug Ø3/4" 4.00 pc/s

ACCU Base, hangers and supports

Angle bar 1 1/2" x 1 1/2" x 3/16" 4.00 length

Full thread rod Ø3/8" 47.00 length

Grip anchor Ø3/8" (50pcs/box) 2.25 box/es

Nuts and washer Ø3/8" 72.00 pc/s

Bolts and nuts Ø3/8" 16.00 pc/s

Loop hanger Ø3" 94.00 pc/s

C-clamp 3" w tox and screw 8.00 pc/s

Spring isolator 16.00 pc/s

Secondary drain pan

GI Sheet GA 22 4.00 sheet/s

Polyolefin insulation 1" thickness x 1.2m x 25m 0.20 roll/s

Consumables

Refrigerant R410a 2.00 tank/s

Nitrogen 2.00 tank/s

R-141B 4.00 can/s

Mapp gas 4.00 tank/s

Silfus Rod 16.00 pc/s

Polyethylene tape 4.00 roll/s

Aerotape 4.00 roll/s

Red oxide paint 1.00 gal

Thinner 1.00 bot

Paint brush 3" 1.00 pc/s

Rubber pad 1/2" thick x 2" x 2" 16.00 pc/s

Rugby 1.00 gal

Solvent 3.00 can/s

Electrical Tape 4.00 pc/s

Welding Rod 4.00 kg/s

Rugs 12.00 pc/s

Sub Total Cost

PROSTHO LABORATORY/PROSTHODONTIC CLINIC

Equipment



1.00 unit/s



1.00 unit/s



1.00 unit/s





BID FORM 4 of 26






Polyethylene Tape 4.00 roll/s









Condensate Drain


Rubber Insulation Ø7/8" x 1/2" x 6' 6.00 pcs

PVC elbow Ø3/4" 9.00 pcs

PVC tee reducer Ø3/4" x 2" x 2" 3.00 pcs

PVC tee Ø3/4" 3.00 pcs

PVC tee Ø3/4" (threaded) 3.00 pcs

PVC coupling Ø3/4" 3.00 pcs

PVC end plug Ø3/4" 3.00 pcs




Grip anchor Ø3/8" (50pcs/box) 2.00 boxes

Nuts and washer Ø3/8" 98.00 pcs

Bolts and nuts Ø3/8" 12.00 pcs

Loop hanger Ø3" 62.00 pcs

C-clamp 3" w tox and screw 6.00 pcs

Spring isolator 12.00 pcs

Secondary drain pan

GI Sheet GA 22 3.00 sheets

Polyolefin insulation 1" thickness x 1.2m x 25m 0.20 roll

Consumables

Refrigerant R410a 2.00 tanks

Nitrogen 2.00 tanks

R-141B 3.00 cans

Mapp gas 3.00 tanks

Silfus Rod 12.00 pcs

Polyethylene tape 3.00 rolls

Aerotape 3.00 rolls


Thinner 1.00 bot

Paint brush 3" 1.00 pc

Rubber pad 1/2" thick x 2" x 2" 16.00 pcs

Rugby 1.00 gal

Solvent 3.00 cans

Electrical Tape 3.00 pcs

Welding Rod 3.00 kg

Rugs 9.00 pcs

Sub Total Cost

BID FORM 5 of 26

RESTORATIVE LABORATORY/ORTHODONTIC CLINIC

Equipment



1.00 unit



1.00 unit



1.00 unit










Polyethylene Tape 8.00 rolls

Copper elbow Ø1/2" LR 14.00 pcs




Copper coupling Ø1/2" 9.00 pcs




Condensate Drain


















Secondary drain pan



Consumables


Nitrogen 2.00 tanks

R-141B 3.00 cans

Mapp gas 3.00 tanks


BID FORM 6 of 26


Aerotape 3.00 rolls


Thinner 1.00 bot



Rugby 1.00 gal

Solvent 3.00 cans


Welding Rod 3.00 kg

Rugs 9.00 pcs

Sub Total Cost

RESTORATIVE CLINIC

Equipment



2.00 units











Condensate Drain


















Secondary drain pan



Consumables


Nitrogen 2.00 tanks

R-141B 2.00 cans

BID FORM 7 of 26

Mapp gas 3.00 tanks



Aerotape 2.00 rolls


Thinner 1.00 bot



Rugby 1.00 gal

Solvent 2.00 cans


Welding Rod 2.00 kg

Rugs 6.00 pcs

Sub Total Cost

ORAL MEDICAL CLINIC

Equipment



3.00 units











Condensate Drain


















Secondary drain pan



Consumables

Refrigerant R410a 1.00 tank

BID FORM 8 of 26

Nitrogen 1.00 tank

R-141B 3.00 cans

Mapp gas 3.00 tanks



Aerotape 2.00 rolls


Thinner 1.00 bot

Paint brush 3" 1.00 pcs


Rugby 1.00 gal

Solvent 3.00 cans


Welding Rod 3.00 kg

Rugs 10.00 pcs

Sub Total Cost

ORAL DIAGNOSTIC CLINIC

Equipment



1.00 unit











Condensate Drain












Grip anchor Ø3/8" (50pcs/box) 1.00 box






Secondary drain pan



BID FORM 9 of 26

Consumables

Refrigerant R410a 1.00 tank

Nitrogen 1.00 tank

R-141B 1.00 can

Mapp gas 1.00 tank

Silfus Rod 4.00 pcs


Aerotape 1.00 rolls


Thinner 1.00 bot



Rugby 1.00 gal

Solvent 1.00 cans


Welding Rod 1.00 kg

Rugs 3.00 pcs

Sub Total Cost

CLASSROOM 1, CLASSROOM 2, & RESEARCH LABORATORY

Equipment



1.00 unit



3.00 units



2.00 units











Condensate Drain















BID FORM 10 of 26




Secondary drain pan



Consumables


Nitrogen 6.00 tanks

R-141B 3.00 can

Mapp gas 6.00 tanks



Aerotape 6.00 rolls


Thinner 1.00 bot



Rugby 2.00 gal

Solvent 2.00 cans


Welding Rod 3.00 kg

Rugs 18.00 pcs

Sub Total Cost

CLASSROOM 3 /LABORATORY

Equipment



1.00 unit



2.00 units



1.00 units











Condensate Drain









BID FORM 11 of 26










Secondary drain pan



Consumables


Nitrogen 4.00 tanks

R-141B 3.00 can

Mapp gas 4.00 tanks



Aerotape 6.00 rolls


Thinner 1.00 bot



Rugby 2.00 gal

Solvent 2.00 cans


Welding Rod 3.00 kg

Rugs 12.00 pcs

Sub Total Cost

Testing and Commissioning 1.00 lot

Sub Total Cost

TOTAL AIRCONDTIONING SYSTEM

4.00 AC DUCTING SYSTEM


Ducting


Polyolefin insulation 1" thickness x 1.2m x 25m 3.00 rolls

SAD 250 x 250 w/ OBVD 9.00 pcs

RAG 1000 x 300 1.00 pc

RAG 800 x 300 1.00 pc

Splitter damper 9.00 pcs

Hangers & Supports

Angle bar 1 1/2" x 1 1/2" x 3/16 thickness 14.00 length

Full thread Ø3/8" 36.00 length



BID FORM 12 of 26

Consumables

Angel corner 360.00 pcs

Duct gasket 8.00 rolls

Duct sealant 2.00 gal


Duct tape 5.00 rolls

Canvass cloth 8.00 yards

Blind rivet 1/8" 1.00 box


Thinner 1.00 bot


Drill bit Ø3/8" (concrete) 1.00 pc

Drill bit Ø3/8" (metal) 1.00 pc

Sub Total Cost


Ducting




SAD 250 x 250 w/ OBVD 20.00 pcs

RAG 1000 x 300 1.00 pc

RAG 800 x 300 1.00 pc


Hangers & Supports





Consumables









Thinner 1.00 bot




Sub Total Cost


Ducting




SAD 250 x 250 w/ OBVD 17.00 pcs

RAG 1000 x 300 1.00 pc

RAG 800 x 300 1.00 pc


BID FORM 13 of 26

Hangers & Supports





Consumables









Thinner 1.00 bot




Sub Total Cost

RESTORATIVE CLINIC

Ducting




SAD 200 x 200 w/ OBVD 17.00 pcs

RAG 1000 x 300 1.00 pc


Hangers & Supports





Consumables









Thinner 1.00 bot




Sub Total Cost

ORAL MEDICAL CLINIC

Ducting


BID FORM 14 of 26


SAD 200 x 200 w/ OBVD 27.00 pcs

RAG 1000 x 300 3.00 pc


Hangers & Supports





Consumables









Thinner 1.00 bot




Sub Total Cost


Ducting




RAG 1000 x 300 1.00 pc


Hangers & Supports



Grip anchor Ø3/8" (50pcs/box) 1.00 box


Consumables









Thinner 1.00 bot




Sub Total Cost

BID FORM 15 of 26


Ducting




SAD 250 x 250 w/ OBVD 12.00 pcs

RAG 1000 x 300 3.00 pcs


Hangers & Supports





Consumables







Blind rivet 1/8" 2.00 boxes


Thinner 1.00 bot




Sub Total Cost


Ducting





RAG 1000 x 300 2.00 pcs


Hangers & Supports





Consumables







Blind rivet 1/8" 2.00 boxes


Thinner 1.00 bot

BID FORM 16 of 26




Sub Total Cost

TOTAL AC DUCTING SYSTEM

5.00 EXHAUST DUCTING SYSTEM


Exhaust Blower

Exhaust Blower SISW @ 880CFM 1.00 unit


Wiring and controller 2.00 sets

Exhaust Ducting


Rockwool insulation 4' x 8' x 1/2" thickness 18.00 sheets

Spiral Duct, 3m/length 10.00 length

Spiral elbow 90deg 10.00 pcs


Spiral duct connector 20.00 pcs

RAG 250 x 250 9.00 pcs


Hangers & Supports

Angle bar 1 1/2" x 1 1/2" x 3/16" thickness 7.00 length

Angle bar 2" x 2" x 1/4" thickness 2.00 length





Consumables









Thinner 1.00 bot




Sub Total Cost


Exhaust Blower




BID FORM 17 of 26

Exhaust Ducting







RAG 250 x 250 3.00 pcs

RAG 150 x 150 17.00 pcs


Hangers & Supports







Consumables









Thinner 1.00 bot




Sub Total Cost


Exhaust Blower




Exhaust Ducting







RAG 250 x 250 3.00 pcs

RAG 150x150 16.00 pcs


Hangers & Supports





BID FORM 18 of 26



Consumables









Thinner 1.00 bot




Sub Total Cost

RESTORATIVE CLINIC

Exhaust Blower


Wiring and controller 1.00 set

Exhaust Ducting







RAG 150x150 24.00 pcs


Hangers & Supports







Consumables









Thinner 1.00 bot




Sub Total Cost

BID FORM 19 of 26

ORAL MEDICAL CLINIC

Exhaust Blower

Exhaust Blower SISW @ 800CFM 3.00 units


Exhaust Ducting







RAG 150x150 24.00 pcs


Hangers & Supports







Consumables









Thinner 1.00 bot




Sub Total Cost


Exhaust Blower


Wiring and controller 1.00 set

Exhaust Ducting







RAG 150x150 5.00 pcs


Hangers & Supports



BID FORM 20 of 26





Consumables









Thinner 1.00 bot




Sub Total Cost


Exhaust Blower


Exhaust Blower SISW @ 1320CFM 2.00 units


Exhaust Ducting







RAG 250x250 18.00 pcs


Hangers & Supports







Consumables









Thinner 1.00 bot



BID FORM 21 of 26


Sub Total Cost


Exhaust Blower




Exhaust Ducting







RAG 250x250 12.00 pcs


Hangers & Supports







Consumables









Thinner 1.00 bot




Sub Total Cost

Testing and Commissioning 1.00 lot

Sub Total Cost

TOTAL EXHAUST DUCTING SYSTEM

6.00 ELECTRICAL WORKS

Electrical Control Wiring for AC System


THHN wire 3.5mm2 300.00 mtr/s

THHN wire 5.5mm2 36.00 mtr/s

BID FORM 22 of 26

EMT conduit Ø1/2" 15.00 length

Liquid tight flexible conduit Ø1/2" 16.00 mtr/s

EMT elbow Ø1/2" 16.00 pc/s

EMT straight connector Ø1/2" 15.00 pc/s

Circuit breaker 30A 3-pole with NEMA 3R Enclosure 4.00 set/s

Sub Total Cost


THHN wire 3.5mm2 300.00 mtrs



Liquid tight flexible conduit Ø1/2" 12.00 mtrs

EMT elbow Ø1/2" 12.00 pcs

EMT straight connector Ø1/2" 16.00 pcs

Circuit breaker 20A 2-pole with NEMA 3R Enclosure 1.00 set

Circuit breaker 30A 3-pole with NEMA 3R Enclosure 2.00 sets

Sub Total Cost










Sub Total Cost

RESTORATIVE CLINIC








Sub Total Cost

ORAL MEDICAL CLINIC








Sub Total Cost









Sub Total Cost

BID FORM 23 of 26










Sub Total Cost









Sub Total Cost

Upgrading of Panel Board

SECOND FLOOR

Wires and Cables

3.5mm2 THHN 2.00 box(s)

5.5mm2 THHN 1.00 roll(s)

8.0mm2 THHN 90.00 mtrs

14mm2 THHN 270.00 mtrs

38mm2 THHN 90.00 mtrs

Conduit Pipes and Accessories

20mmØ PVC conduit pipe with fittings and complete accessories 55.00 lengths



Circuit Breakers and Accessories

PPAC-SF @ 60AT 3 pole, 18KAIC with 6 branch circuits @

20AT 2 pole,1-40AT 2 pole, 2-60AT 2 pole, & & 1-70AT 2 pole 1.00 assy.

bolt-on type.

20AT, 2 pole, NEMA 3R, Enclosure 2.00 unit(s)




Sub Total Cost

THIRD FLOOR

Wires and Cables

3.5 mm² THHN 8.00 box(s)

5.5 mm² THHN 3.00 roll(s)

8.0 mm² THHN 370.00 mtr(s)

14 mm² THHN 90.00 mtr(s)



BID FORM 24 of 26







PPAC-TF @ 160AT, 3 pole, 35KAIC with

21 branch circuits @ 9-20AT 2 pole, 3-30AT 2 pole, 2-60AT 2 pole, 1.00 assy.

3-50AT 3 pole, 3-40AT 2 pole & 1-70AT 2 pole bolt-on type.







Sub Total Cost

FOURTH FLOOR

Wires and Cables

3.5 mm² THHN 6.00 box(s)

5.5 mm² THHN 2.00 roll(s)

8.0 mm² THHN 450.00 mtr(s)










PPAC-FF @ 200AT, 3 pole, 35KAIC with

15 branch circuits @ 5-20AT 2 pole, 1-50AT 3 pole, 1-40AT 2 pole, 1.00 assy.

4-60AT 3 pole, & 4-70AT 2 pole bolt-on type..






Sub Total Cost

DP ELECTRICAL ROOM @ GROUND FLOOR

DP MAIN @ 500AT 3 pole, 35KAIC, 230V, with branch

circuits @ 1-60AT 3 pole, 18KAIC, 1-160AT 3 pole, 35KAIC 1.00 assy.

& 1-200AT 3 pole, 35KAIC bolt-on type.

THHN wire 250mm2 60.00 mtrs

THHN wire 50mm2 20.00 mtrs

100mmØ PVC Pipe 10.00 pcs

Fabrication of Busbar @ MDP (Including lags & Accessories) 1.00 lot

Sub Total Cost

BID FORM 25 of 26

Miscellaneous Items

copper groound rod 5/8" 3m 4.00 length

Big Electrical Tape 72.00 roll(s)

Rubber Tape 11.00 roll(s)

GI Wire 10.00 kilo(s)

Chipping & Restoration Works 1.00 lot

Hanger & Support 1.00 lot

Termination of existing panel board, and Testing and Commisioning 1.00 lot

Sub Total Cost

TOTAL ELECTRICAL WORKS

1.00 GENERAL REQUIREMENTS PhP

2.00 ARCHITECTURAL WORKS

3.00 AIRCONDITIONING SYSTEM

4.00 AC DUCTING SYSTEM

5.00 EXHAUST DUCTING SYSTEM

6.00 ELECTRICAL WORKS

SUB-TOTAL COST PhP

VAT @ 12.00%

TOTAL PROJECT COST PhP

Amount in Words :

By the act of submitting this bid, I/we hereby confirm that I/we:

a) have inspected the site

b) determined the characteristics of the contract works and the conditions for this project

c) examined all instructions, forms, terms and project requirements in the Bidding Documents

d) was/were given the opportunity to submit queries at least ten(10) calendar days before the submission of bids

e) have examined and agreed to the correctness of the Bill of Quantities

Submitted by:

Name and Signature: Company Name:

Position: Date:

***SUMMARY***

Note:

*Indirect Cost (OCM, & Profit) included per item unit cost

*Power and water consumption are included in mark up (indirect cost)

*Bonds & Securities and power & water supply consumption are considered as overhead expenses while Plans (As-built plan) is considered as

miscellaneous expense which are already included in the computation of OCM (mark-up).

BID FORM 26 of 26