PROPERTY OWNER: 400 ANSIN LLC LEGAL DESCRIPTION: WEDGEWOOD BUSINESS PARK 400 ANSIN CONDO UNIT 400A FOLIO NUMBER: 5142 21 AE 0010 JURISDICTION: CITY OF HALLANDALE BEACH BROWARD COUNTY STATE OF FLORIDA CODE COMPLIANCE: FLORIDA BUILDING CODE 2014 ED FLORIDA FIRE PREVENTION CODE 2012 5TH ED NFPA LIFE SAFETY CODE 2012 ASCE 07-10 SCOPE OF WORK AREA:7,600 SF 7,600 SF OCCUPANT LOAD:SEE LIFE SAFETY PLAN SEE LIFE SAFETY PLAN TRAVEL DISTANCE:SEE LIFE SAFETY PLAN SEE LIFE SAFETY PLAN TYPE OF CONSTRUCTION:TYPE III-UNPROTECTED - NO FIRE TYPE III-UNPROTECTED - NO FIRE ALARM OR SPRINKLER SYSTEM OCCUPANCY CLASSIFICATION:GROUP F-2/B GROUP F-2/B ALTERATION LEVEL:LEVEL II LEVEL II SCOPE OF WORK: PROVIDE AFTER-THE-FACT FLOOR PLANS FOR INTERIOR MODIFICATIONS DONE AT ADDRESS LISTED ABOVE INCLUDING LIFE SAFETY PLAN, ELECTRICAL PLAN, PLUMBING PLAN.
AutoCAD SHX Text
PROJECT INFORMATION
AutoCAD SHX Text
400 ANSIN BLVD 400A SCOPE OF WORK AREA
AutoCAD SHX Text
HALLANDALE BEACH BLVD
AutoCAD SHX Text
ANSIN BLVD
AutoCAD SHX Text
ANSIN BLVD
AutoCAD SHX Text
I-95
AutoCAD SHX Text
SHEET INDEX
AutoCAD SHX Text
CV-1.0COVER SHEET/PROJECT INFORMATION COVER SHEET/PROJECT INFORMATION A-1.0EXTG 1ST FLOOR PLAN EXTG 1ST FLOOR PLAN A-2.0EXTG 2ND FLOOR PLAN EXTG 2ND FLOOR PLAN LS-1.01ST FLOOR LIFE SAFETY PLAN 1ST FLOOR LIFE SAFETY PLAN LS-2.02ND FLOOR LIFE SAFETY PLAN 2ND FLOOR LIFE SAFETY PLAN E-1.01ST FLOOR ELECTRICAL PLAN 1ST FLOOR ELECTRICAL PLAN E-2.02ND FLOOR ELECTRICAL PLAN 2ND FLOOR ELECTRICAL PLAN P-1.0PLUMBING PLANPLUMBING PLAN
AutoCAD SHX Text
LOCATION MAP
AutoCAD SHX Text
1. PERMITS: CONTRACTOR SHALL SECURE ALL NECESSARY, BUT NOT PERMITS: CONTRACTOR SHALL SECURE ALL NECESSARY, BUT NOT CONTRACTOR SHALL SECURE ALL NECESSARY, BUT NOT LIMITED TO BUILDING, ROOFING, MECHANICAL ELECTRICAL PLUMBING PERMITS AT OWN EXPENSE SO THAT THE OWNER CAN OBTAIN HIS/HER BUILDING PERMITS AND/OR CERTIFICATE OF OCCUPANCY. 2. QUALIFICATIONS: THE GENERAL CONTRACTOR AND ALL QUALIFICATIONS: THE GENERAL CONTRACTOR AND ALL THE GENERAL CONTRACTOR AND ALL SUBCONTRACTORS SHALL BE LICENSED BY THE STATE OF FLORIDA, AS WELL AS THE COUNTY AND BE ABLE TO PROVIDE PROOF OF INSURANCE TO MEET THE REQUIREMENTS OF THE MUNICIPALITY AND COUNTY. 3. OWNER SHALL HAVE THE RIGHT OF APPROVAL OR REJECTION OF ALL SUBCONTRACTORS PRIOR TO THE SIGNING OF THE CONTRACT. GENERAL CONTRACTOR SHALL SUBMIT A LIST OF ALL PROPOSED SUBCONTRACTORS TO THE OWNER. 4. EXISTING CONDITIONS: CONTRACTOR, BY AND THROUGH SUBMISSION EXISTING CONDITIONS: CONTRACTOR, BY AND THROUGH SUBMISSION CONTRACTOR, BY AND THROUGH SUBMISSION OF HIS BID, AGREES THAT HE SHALL BE HELD RESPONSIBLE FOR HAVING EXAMINED THE SITE, THE LOCATION OF ALL PROPOSED WORK AND FOR HAVING SATISFIED HIMSELF FROM HIS OWN PERSONAL KNOWLEDGE AND EXPERIENCE OR PROFESSIONAL ADVICE AS TO THE CHARACTERISTICS, OBSTRUCTIONS, AND LOCATION OF THE SITE, THE NATURE OF EXISTING CONDITIONS, THE LOCATION OF EXISTING UTILITIES AND ANY OTHER CONDITIONS SURROUNDING AND AFFECTING THE WORK IN ORDER THAT HE MAY INCLUDE IN HIS PRICE ALL COSTS PERTAINING TO THE WORK. 5. ALL MEASUREMENTS AND DIMENSIONS MUST BE VERIFIED BY THE ALL MEASUREMENTS AND DIMENSIONS MUST BE VERIFIED BY THE MUST BE VERIFIED BY THE CONTRACTOR IN THE FIELD, THE DIMENSIONS SHOWN ARE AS ACCURATE AS THE DOCUMENTS PERMIT. ANY DISCREPANCIES MUST BE BROUGHT TO THE ATTENTION ON THE ENGINEER OF RECORD IMMEDIATELY PRIOR TO THE COMMENCEMENT OF WORK. DO NOT SCALE DRAWINGS, USE DIMENSIONS ONLY. LARGE SCALE DRAWINGS SHALL GOVERN OVER SMALL. 6. ALL WORK SHALL COMPLY AT ALL TIMES WITH REQUIREMENTS OF FLORIDA BUILDING CODE, LIFE SAFETY CODE (NFPA 101), THE FLORIDA ACCESSIBILITY CODE. 7. SHOP DRAWINGS: THE CONTRACTOR SHALL SUBMIT FIVE SETS OF SHOP DRAWINGS: THE CONTRACTOR SHALL SUBMIT FIVE SETS OF THE CONTRACTOR SHALL SUBMIT FIVE SETS OF ALL SHOP DRAWINGS CALLED FOR ON THE DRAWINGS OR REQUIRED BY BUILDING OFFICIALS TO THE ENGINEER OF RECORD IN REQUIRED SUFFICIENT TIME TO BE REVIEWED AND PROCESSED PRIOR TO FABRICATION, SO AS TO CAUSE NO TIME DELAY IN THE CONSTRUCTION SEQUENCE. 8. PROTECTION: THE CONTRACTOR SHALL PROTECT ADJACENT PARTS PROTECTION: THE CONTRACTOR SHALL PROTECT ADJACENT PARTS THE CONTRACTOR SHALL PROTECT ADJACENT PARTS OF EXISTING ADJACENT BUILDINGS AND THE ADJACENT SITES FROM DAMAGE DURING ALL PHASES OF CONSTRUCTION AND BE LIABLE FOR SAME. 9. WORKMANSHIP: ALL MATERIALS SPECIFIED SHALL BE NEW AND ALL WORKMANSHIP: ALL MATERIALS SPECIFIED SHALL BE NEW AND ALL ALL MATERIALS SPECIFIED SHALL BE NEW AND ALL WORKMANSHIP SHALL BE FIRST CLASS FOLLOWING THE MANUFACTURER'S SPECIFICATIONS ALONG WITH THE BEST TRADE PRACTICES AND STANDARDS. 10. ALL WORK TO BE GUARANTEED AGAINST POOR WORKMANSHIP AND DEFECTS. 11. THE GENERAL CONTRACTOR SHALL FURNISH ALL LABOR, MATERIALS AND EQUIPMENT (UNLESS NOTED OTHERWISE) REQUIRED FOR THE COMPLETION OF THE JOB IN ACCORDANCE WITH THESE DRAWINGS. 12. GENERAL CONTRACTOR SHALL CLEAN UP AND REMOVE FROM THE SITE ALL RUBBISH REFUSE, SCRAP MATERIALS AND DEBRIS CAUSED BY THIS PROJECT AT THE END OF EACH DAY AND INSURE THAT THE SITE OF WORK SHALL PRESENT A NEAT, ORDERLY AND WORKMANLIKE APPEARANCE. 13. GENERAL CONTRACTOR SHALL PRESENT THE JOB TO THE OWNER FOR ACCEPTANCE, CLEANED AND READY FOR OCCUPANCY. ALL GLASS SHALL BE CLEANED AND POLISHED, FLOORS SWEPT BROOM CLEAN, CARPETS VACUUMED, FIXTURES WASHED AND ALL LABELS REMOVED. 14. STORE MATERIALS WITHIN OWNER'S PROPERTY ONLY, IN A SAFE AND APPROVED LOCATION. COMPLY WITH ALL LOCAL REGULATIONS AS TO MINIMIZE INTERRUPTIONS AND/OR INTERFERENCE WITH ANY OF THE SURROUNDING OPERATIONS. 15. ALL WOOD IN CONTACT WITH MASONRY SHALL BE PRESSURE TREATED.
AutoCAD SHX Text
GENERAL NOTES
AutoCAD SHX Text
1
FIRST FLOOR PLAN
SCALE: 1/4" = 1'-0"
SHEET
A-1.0
PROJECT NO.
16-0329
DATE
04-28-2016
SEAL
NO. REVISION/ISSUE DATE
DRAWN BY: J.P.C.
CHECKED BY: V.L.C.
AF
TE
R-T
HE
-F
AC
T IN
TE
RIO
R A
LT
ER
AT
IO
N
400 A
NS
IN
LLC
400 A
NS
IN
B
LV
D 400A
HA
LLA
ND
ALE
B
EA
CH
, F
LO
RID
A 33009
VLC
O
NE
, IN
C.
5365 N
W 126 D
RIV
E
CO
RA
L S
PR
IN
GS
, F
L 33076
954-864-2775
VANDIN CALITU, P.E.
FL. REG. NO. 57982
1 J.P.C. 01/18/2017
2 J.P.C. 07/05/2017
3 J.P.C. 07/27/2017
AutoCAD SHX Text
BREAK AREA CEIL HT. 8'-0"
AutoCAD SHX Text
WOMEN'S ADA BATH CEIL HT. 8'-0"
AutoCAD SHX Text
BREAK AREA CEIL HT. 8'-0"
AutoCAD SHX Text
RECEPTION CEIL HT. 20'-0"
AutoCAD SHX Text
CONFERENCE ROOM CEIL HT. 8'-0"
AutoCAD SHX Text
STORAGE CEIL HT. 8'-0"
AutoCAD SHX Text
OFFICE CEIL HT. 8'-0"
AutoCAD SHX Text
CONFERENCE AREA CEIL HT. 8'-0"
AutoCAD SHX Text
OFFICE CEIL HT. 8'-0"
AutoCAD SHX Text
OFFICE CEIL HT. 8'-0"
AutoCAD SHX Text
CONFERENCE ROOM CEIL HT. 8'-0"
AutoCAD SHX Text
RECEIVING CEIL HT. 8'-0"
AutoCAD SHX Text
RECEIVING CEIL HT. 8'-0"
AutoCAD SHX Text
CONFERENCE AREA CEIL HT. 8'-0"
AutoCAD SHX Text
PROCESSING CEIL HT. 8'-0"
AutoCAD SHX Text
STORAGE CEIL HT. 20'-0"
AutoCAD SHX Text
RECEIVING AREA CEIL HT. 20'-0"
AutoCAD SHX Text
LOBBY CEIL HT. 8'-0"
AutoCAD SHX Text
HALLWAY CEIL HT. 8'-0"
AutoCAD SHX Text
MEN'S ADA BATH CEIL HT. 8'-0"
AutoCAD SHX Text
ADJACENT SPACE NOT IN SCOPE
AutoCAD SHX Text
ADJACENT SPACE NOT IN SCOPE
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
EXTG MTL. DOORS TO REMAIN W/ EXTG SIGN "DOORS TO REMAIN UNLOCKED WHILE BUILDING IS OCCUPIED"
AutoCAD SHX Text
EXTG EGRESS DOOR W/ PANIC BAR HARDWARE & SELF-CLOSURE
AutoCAD SHX Text
EXTG EGRESS DOOR W/ PANIC BAR HARDWARE & SELF-CLOSURE
AutoCAD SHX Text
EXTG 45 MIN. "C" LABEL 3'-0"x7'-0" DBL DOORS W/ ADA COMPLIANT LEVER TYPE LOCKING HARDWARE
WALL TYPE LEGEND: EXTG 8" CMU EXTERIOR WALL EXTG 4" INTERIOR 25 GA MTL. NON-LOAD BEARING PARTITION NEW 4" INTERIOR 25 GA MTL. NON-LOAD BEARING PARTITION 4" 2-HR FIRE RATED NON-BEARING PARTITION (UL U419) TO BOTTOM OF CONC. ROOF DECK
AutoCAD SHX Text
W1
AutoCAD SHX Text
W2
AutoCAD SHX Text
W3
AutoCAD SHX Text
W4
AutoCAD SHX Text
PROPOSED BUILDING SCOPE OF WORK: PROVIDE NEW INTERIOR PARTITIONS AS INDICATED ON PLAN PROVIDE NEW TOILET AND SINK FIXTURE AT NEW 2ND FLOOR MEN'S BACK. TOILET FLANGE TO MEET FIN. FL. EL. NOTE: ALL OTHER ITEMS EXISTING TO REMAIN AND NOT ALL OTHER ITEMS EXISTING TO REMAIN AND NOT INCLUDED IN SCOPE OF WORK.
CONTINUOUS 3-3/4" 20 GA MTL. TOP 20 GA MTL. TOP MTL. TOP TRACK SET IN FULL BED OF CAULKING AND FASTENED TO UNDERSIDE OF STRUCTURE USING " TAPCONS @ 18" USING " TAPCONS @ 18" 14" TAPCONS @ 18"O/C MIN. " EMBED.14" EMBED.
AutoCAD SHX Text
3-3/4" 20 GA FIRE BLOCKING 20 GA FIRE BLOCKING FIRE BLOCKING @ 8'-0" A.F.F.
AutoCAD SHX Text
5/8" GYPSUM WALL BOARD TAPED AND FINISHED ON EACH SIDE
AutoCAD SHX Text
5/8" GYPSUM WALL BOARD TAPED AND FINISHED ON EACH SIDE
AutoCAD SHX Text
BASE
AutoCAD SHX Text
EXISTING CONC SLAB
AutoCAD SHX Text
CONTINUOUS 3-3/4" 20 GA 20 GA MTL. BOTTOM TRACK FASTENED TO CONC. SLAB USING USING 14" X1-1/4" TAPCONS @ 18" O/C
BUILDING CLASSIFICATION - FBC 303 TYPE OF CONSTRUCTIONIII-B III-B OCCUPANCY GROUPB/F-2 MIXED USE BUSINESS/LOW B/F-2 MIXED USE BUSINESS/LOW HAZARD INDUSTRIAL (EXTG TO REMAIN) BUSINESS USE = 5,337 SF (19,000 SF ALLOWED UNDER FBC TABLE 503) INDUSTRIAL USE = 2,263 SF (18,000 SF ALLOWED UNDER FBC TABLE 503) OCCUPANCY LOAD - FBC 1004.1.2 BUSINESS AREA6,400 SF GROSS @ 1/100SF = 64 PEOPLE 6,400 SF GROSS @ 1/100SF = 64 PEOPLE = 64 PEOPLE INDUSTRIAL AREA1,730 SF GROSS @ 1/100SF= 17 PEOPLE 1,730 SF GROSS @ 1/100SF= 17 PEOPLE = 17 PEOPLE TOTAL BLDG. OCCUPANCY LOAD= 81 PEOPLE = 81 PEOPLE EXIT TRAVEL DISTANCE - TABLE 1016.2 (W/O SPRINKLER SYSTEM) BUSINESS USE (W/O SPRINKLER SYSTEM) MAX ALLOWABLE 200.0' - ___ PROVIDED F-2 USE (W/O SPRINKLER SYSTEM) MAX ALLOWABLE 300.0' - ___ PROVIDED COMMON PATH OF EGRESS TRAVEL - FBC TABLE 1014.3 BUSINESS USE (W/O SPRINKLER SYSTEM) MAX ALLOWABLE 75.0' - ___ PROVIDED F-2 USE (W/O SPRINKLER SYSTEM) MAX ALLOWABLE 75.0' - ___ PROVIDED SIGNAGE - MAXIMUM OCCUPANCY LOAD SIGNS FOR EACH AREA BUSINESS AND INDUSTRIAL TO BE POSTED AT MAIN BUSINESS AREA AND MAIN INDUSTRIAL AREA - ALL SIGNAGE TO SAY "EGRESS DOORS TO REMAIN UNLOCKED DURING NORMAL HOURS OF BUSINESS OPERATION"
AutoCAD SHX Text
LIFE SAFETY NOTES - NFPA 101 2012:
AutoCAD SHX Text
PROJECT DESCRIPTION -HAZARD CLASSIFICATION TO BE "GENERAL HAZARD OCCUPANCY" AS PER NFPA 101, CH. 40.1.2.1 -BLDG. HAS NO FIRE SPRINKLER SYSTEM -BLDG. HAS FIRE ALARM SYSTEM -THERE IS NO EXTG. OR PROP. BACK-UP GENERATOR OCCUPANT LOAD FACTOR - 7.3.1.2 BUSINESS AREA6,400 SF GROSS @ 1/100SF = 64 PEOPLE 6,400 SF GROSS @ 1/100SF = 64 PEOPLE = 64 PEOPLE INDUSTRIAL AREA1,730 SF GROSS @ 1/100SF= 17 PEOPLE 1,730 SF GROSS @ 1/100SF= 17 PEOPLE = 17 PEOPLE TOTAL BLDG. OCCUPANCY LOAD= 81 PEOPLE = 81 PEOPLE HAZARD CLASSIFICATION - 6.2.2.3 ORDINARY HAZARD CONTENTS - CONTENTS CLASSIFIED AS THOSE THAT ARE LIKELY TO BURN WITH MODERATE RAPIDITY OR TO GIVE OFF A CONSIDERABLE VOLUME OF SMOKE MATERIAL STORAGE RESTRICTION NO HAZARDOUS OR FLAMMABLE MATERIALS MAY BE STORED INSIDE BLDG. MEANS OF EGRESS (BUSINESS NON-SPRINKLERED) 1. TRAVEL DISTANCE (SEC 39.2.6.2) MAX ALLOWED 200.0' 2. PROP. MAIN ENTRANCE/EGRESS DOOR CLEAR WIDTH = 36" 3. (2) EXTG EXITS PROVIDED 4. COMMON PATH OF TRAVEL MAX ALLOWED 75.0' (INDUSTRIAL NON-SPRINKLERED) 1.TRAVEL DISTANCE (TABLE 40.2.6) TRAVEL DISTANCE (TABLE 40.2.6) MAX ALLOWED 200.0' 2.PROP. MAIN ENTRANCE/EGRESS DOOR CLEAR WIDTH = 72" PROP. MAIN ENTRANCE/EGRESS DOOR CLEAR WIDTH = 72" 3.(2) EXTG EXITS PROVIDED (2) EXTG EXITS PROVIDED 4.COMMON PATH OF TRAVEL (UNPROTECTED) (TABLE 40.2.5) COMMON PATH OF TRAVEL (UNPROTECTED) (TABLE 40.2.5) MAX ALLOWED 50.0' NOTES: 1.ALL INTERIOR FINISHES TO COMPLY WITH 39.3.3 (BUSINESS - ALL ALL INTERIOR FINISHES TO COMPLY WITH 39.3.3 (BUSINESS - ALL INTERIORS SHALL BE CLASS A OR CLASS B IN EXITS AND IN EXIT ACCESS CORRIDORS) & 40.3.3 (INDUSTRIAL - INTERIOR FINISHES SHALL BE CLASS A, B, OR C IN OPERATING AREAS) 2.NO-SMOKING SIGNAGE TO BE POSTED AS PER 12.7.8.2 (IN ROOMS OR NO-SMOKING SIGNAGE TO BE POSTED AS PER 12.7.8.2 (IN ROOMS OR AREAS WHERE SMOKING IS PROHIBITED, PLAINLY VISIBLE SIGNS SHALL BE POSTED THAT READ AS FOLLOWS: NO SMOKING) 3.OCCUPANT LOAD SIGNAGE SHALL BE POSTED AS PER 12.7.9.3 OCCUPANT LOAD SIGNAGE SHALL BE POSTED AS PER 12.7.9.3 (OCCUPANT LOAD SHALL BE POSTED IN A CONSPICUOUS PLACE NEAR THE MAIN EXIT(S). APPROVED SIGNS SHALL BE MAINTAINED IN A LEGIBLE MANNER BY THE OWNER. SIGNS SHALL BE DURABLE AND SHALL INDICATE THE NUMBER OF OCCUPANTS PERMITTED FOR SPACE USE.) 4.ILLUMINATION OF MEANS OF EGRESS TO BE AS PER 7.8 (ILLUMINATION ILLUMINATION OF MEANS OF EGRESS TO BE AS PER 7.8 (ILLUMINATION OF MEANS OF EGRESS SHALL BE PROVIDED FOR EXIT ACCESS & DISCHARGE AREAS. ILLUMINATION SHALL BE CONTINUOUS DURING TIME OF OCCUPANCY. 5.EMERGENCY LIGHTING AS PER 7.9 (EMERGENCY LIGHTING SHALL BE EMERGENCY LIGHTING AS PER 7.9 (EMERGENCY LIGHTING SHALL BE PROVIDED FOR A MINIMUM OF 1.5 HOURS IN THE EVENT OF FAILURE OF NORMAL LIGHTING. EMERGENCY LIGHTING SHALL BE ARRANGED TO PROVIDE ILLUMINATION THAT IS NOT LESS THAN AN AVERAGE OF 1 FT-CANDLE AND NOT LESS THAN 0.1 FT-CANDLE AT ANY POINT.) 6.ALL DOOR OPENINGS AS PER 7.2.1 (EVERY DOOR OPENING THAT IS ALL DOOR OPENINGS AS PER 7.2.1 (EVERY DOOR OPENING THAT IS REQUIRED TO SERVE AS AN EXIT SHALL BE DESIGNED AND CONSTRUCTED SO THAT THE PATH OF EGRESS TRAVEL IS OBVIOUS AND DIRECT. 7.MEANS OF EGRESS SHALL BE MARKED AS PER 7.10 (EXITS SHALL BE MEANS OF EGRESS SHALL BE MARKED AS PER 7.10 (EXITS SHALL BE MARKED BY AN APPROVED SIGN THAT IS READILY VISIBLE FROM ANY DIRECTION OF EXIT ACCESS. ) 8.REMOTENESS OF MEANS OF EGRESS SHALL BE PROVIDED IN REMOTENESS OF MEANS OF EGRESS SHALL BE PROVIDED IN ACCORDANCE WITH 7.5.1.3, AND REMOTENESS PER 7.5.1.3.1 (WHERE MORE THAN ONE EXIT IS REQUIRED FROM A BUILDING OR PORTION THEREOF, EXITS SHALL BE LOCATED REMOTELY FROM EACH OTHER TO MINIMIZE THE POTENTIAL THAT ONE OR MORE EXITS BE BLOCKED IN A FIRE OR EMERGENCY SITUATION) WITH EXCEPTION GIVEN IN 7.5.1.3.5. FOR EXISTING BUILDINGS (EXCLUDES DIAGONAL MEASUREMENT SEPARATION DISTANCE CRITERIA OF 7.5.1.3.2. AND 7.5.1.3.3.) EACH EXISTING EXIT WHICH SERVES THE BUSINESS AND F-1 OCCUPANCIES ARE LOCATED REMOTELY FROM EACH OTHER TO MINIMIZE THE DANGER OF ONE OF THE EXITS BE BLOCKED TO NOT ALLOW ACCESS OUT OF THE BUILDING IN CASE OF AN EMERGENCY.
AutoCAD SHX Text
ACCESSIBILITY NOTE AS PER FBC 2014 ACCESSIBILITY 202.4.1, ALTERATIONS MADE TO PROVIDE AN ACCESSIBLE PATH OF TRAVEL TO ALTERED AREAS WILL BE DEEMED DISPROPORTIONATE TO THE OVERALL ALTERATION WHEN THE COST EXCEEDS 20% OF THE COST OF THE ALTERATION TO THE PRIMARY FUNCTION AREA. EXISTING SECOND FLOOR DOES NOT FUNCTION AS THE PRIMARY FUNCTION AREA. AS SUCH, THE COST TO PROVIDE ACCESSIBLE PATH OF TRAVEL TO THE SECOND EXCEEDS 20% OF THE COST OF THE OVERALL ALTERATION. THEREFORE, ACCESSIBILITY TO SECOND FLOOR IS EXEMPT AS PER FBC 2014 ACCESSIBILITY 202.4.1. OVERALL JOB COST AS PER CONTRACT DOCUMENTS IS $36,000.00. COST FOR CHAIR LIST IS EXPECTED TO BE $10,000.00, WHICH EXCEEDS 20% OF ALTERATION COST.
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
SECOND FLOOR LIFE SAFETY PLAN
SCALE: 1/4" = 1'-0"
SHEET
LS-2.0
PROJECT NO.
16-0329
DATE
04-28-2016
SEAL
NO. REVISION/ISSUE DATE
DRAWN BY: J.P.C.
CHECKED BY: V.L.C.
AF
TE
R-T
HE
-F
AC
T IN
TE
RIO
R A
LT
ER
AT
IO
N
400 A
NS
IN
LLC
400 A
NS
IN
B
LV
D 400A
HA
LLA
ND
ALE
B
EA
CH
, F
LO
RID
A 33009
VLC
O
NE
, IN
C.
5365 N
W 126 D
RIV
E
CO
RA
L S
PR
IN
GS
, F
L 33076
954-864-2775
VANDIN CALITU, P.E.
FL. REG. NO. 57982
1 V.L.C. 12/21/2016
2 V.L.C. 7/24/2017
AutoCAD SHX Text
MEN'S BATH CEIL HT. 8'-0"
AutoCAD SHX Text
OFFICE CEIL HT. 8'-0"
AutoCAD SHX Text
OFFICE CEIL HT. 8'-0"
AutoCAD SHX Text
OFFICE CEIL HT. 8'-0"
AutoCAD SHX Text
OFFICE CEIL HT. 8'-0"
AutoCAD SHX Text
OFFICE CEIL HT. 8'-0"
AutoCAD SHX Text
OFFICE CEIL HT. 8'-0"
AutoCAD SHX Text
OFFICE CEIL HT. 8'-0"
AutoCAD SHX Text
OPEN TO BELOW
AutoCAD SHX Text
CUBICLE AREA CEIL HT. 8'-0"
AutoCAD SHX Text
OPEN TO BELOW
AutoCAD SHX Text
WOMEN'S BATH CEIL HT. 8'-0"
AutoCAD SHX Text
ADJACENT SPACE NOT IN SCOPE
AutoCAD SHX Text
ADJACENT SPACE NOT IN SCOPE
AutoCAD SHX Text
(N)
AutoCAD SHX Text
(N)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
COMMON PATH OF TRAVEL=50'-0"
AutoCAD SHX Text
COMMON PATH OF TRAVEL=18'-6"
AutoCAD SHX Text
TRAVEL DIST.=16'-9"
AutoCAD SHX Text
TRAVEL DIST.=29'-6"
AutoCAD SHX Text
TRAVEL DIST.=32'-4"
AutoCAD SHX Text
FEX
AutoCAD SHX Text
FEX
AutoCAD SHX Text
FEX
AutoCAD SHX Text
(E)
AutoCAD SHX Text
AHU 2
AutoCAD SHX Text
BUSINESS OCCUPANCY
AutoCAD SHX Text
BUSINESS OCCUPANCY
AutoCAD SHX Text
EXTG 2-HR FIRE RATED DOOR
AutoCAD SHX Text
F2 OCCUPANCY
AutoCAD SHX Text
BUSINESS SECOND FLOOR OCCUPANCY = 22 PEOPLE
AutoCAD SHX Text
2
AutoCAD SHX Text
2
(E)10"X8" S/A DUCT(E)12"x8" S/AGRILLE
(E)12"x10"S/A GRILLE
(E)12"X12" S/A DUCT
(E)1
2"X1
2" S
/A D
UC
T
(E)12"x8" S/AGRILLE
(E)12"x8" S/AGRILLE
(E)12"X8" S/A DUCT (E)16"X8" S/A DUCT
(E)1
4"X1
2" S
/A D
UC
T
(E)12"x8" S/AGRILLE
(E)1
8"X1
2" S
/A D
UC
T(E
)22"
X12"
S/A
DU
CT
(E)12"x8" S/AGRILLE
(E)10"x6" S/AGRILLE
(E)14"x6" S/AGRILLE
(E)1
0"Ø
S/A
DU
CT
(E)1
0"Ø
S/A
DU
CT
(E)1
0"Ø
S/A
DU
CT
(E)12"x8" S/AGRILLE
(E)12"x8" S/AGRILLE
(E)12"x6" R/ATRX GRILLE
(E)12"x6" R/ATRX GRILLE
(E)12"x6" R/ATRX GRILLE
(E)1
2"x6
" R/A
TRX
GR
ILLE
(E)1
2"x6
" R/A
TRX
GR
ILLE
(E)12"x6" R/ATRX GRILLE
(E)1
2"x6
" R/A
TRX
GR
ILLE
EF-1 75 CFM4"Ø MTL. DUCT
EF-1 75 CFM4"Ø MTL. DUCT
(E)1
8"X1
0" E
XH D
UC
T
(E) BAROMETRICEXH DAMPER
RTU 1
(E)10"X8" S/A DUCT
(E)24"x24"10"Ø S/A GRILLE(E)24"x24"
10"Ø S/A GRILLE
(E)24"x24"10"Ø S/A GRILLE
(E)24"x24"10"Ø S/A GRILLE
(E)24"x24"10"Ø S/A GRILLE
(E)24"x24"10"Ø S/A GRILLE
(E)24"x24"R/A GRILLE
(E)24"x24"R/A GRILLE
(E)14"Ø(E)14"Ø(E)14"Ø
(E)14"Ø
(E)8
"X14
" S/A
DU
CT
RTU 2
(E)14"X12" S/A DUCT
(E)24"x6"S/A GRILLE
(E)24"x6"S/A GRILLE
(E)1
4"X1
2" S
/A D
UC
T
(E)12"x12" R/ATRX GRILLE
(E) ROOF MOUNTEDGOOSENECK VENT
(E) EXH. FAN
(E)12"x10" S/A GRILLE6"Ø FLEX DUCT
W/ FIRE DAMPER
FIRST FLOOR MECHANICAL PLAN
SCALE: 1/4" = 1'-0"
SHEET
M-1.0
PROJECT NO.
16-0329
DATE
11-18-2016
SEAL
NO. REVISION/ISSUE DATE
DRAWN BY: J.P.C.
CHECKED BY: V.L.C.
AF
TE
R-T
HE
-F
AC
T IN
TE
RIO
R A
LT
ER
AT
IO
N
400 A
NS
IN
LLC
400 A
NS
IN
B
LV
D 400A
HA
LLA
ND
ALE
B
EA
CH
, F
LO
RID
A 33009
VLC
O
NE
, IN
C.
5365 N
W 126 D
RIV
E
CO
RA
L S
PR
IN
GS
, F
L 33076
954-864-2775
VANDIN CALITU, P.E.
FL. REG. NO. 57982
1 V.L.C. 01/09/2017
2 V.L.C. 03/22/2017
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
AHU 1
AutoCAD SHX Text
FD
AutoCAD SHX Text
FD
AutoCAD SHX Text
FD
AutoCAD SHX Text
FD
AutoCAD SHX Text
FD
AutoCAD SHX Text
FD
AutoCAD SHX Text
SUPPLY AIR DIFFUSER. SEE SCHEDULE FOR SIZE & DETAILS
AutoCAD SHX Text
DUCT SMOKE DETECTOR
AutoCAD SHX Text
PROGRAMMABLE THERMOSTAT
AutoCAD SHX Text
ROUND 25 MTL DUCT. SEE SCHEDULE FOR SIZING
AutoCAD SHX Text
MECHANICAL EQUIP LEGEND
AutoCAD SHX Text
SD
AutoCAD SHX Text
T
AutoCAD SHX Text
RETURN AIR DIFFUSER. SEE SCHEDULE FOR SIZE & DETAILS
AutoCAD SHX Text
RETURN AIR R-6.0 FLEX DUCT
AutoCAD SHX Text
SUPPLY AIR R-6.0 FLEX DUCT
AutoCAD SHX Text
MANUAL VOLUME DAMPER
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
HVAC DESIGN REQUIRES: DUCT SMOKE DETECTOR FIRE DAMPER(S) SMOKE DAMPER(S) FIRE RATED ENCLOSURE FIRE RATED ROOF/FLOOR CEILING ASSEMBLY FIRE STOPPING SMOKE CONTROL
AutoCAD SHX Text
YES
AutoCAD SHX Text
NO
AutoCAD SHX Text
VD
AutoCAD SHX Text
VENT CAP
AutoCAD SHX Text
AUTOMATIC FIRE DAMPER
AutoCAD SHX Text
FD
AutoCAD SHX Text
1. THE WORK THAT IS TO BE DONE UNDER THIS HEADING INCLUDES THE FURNISHING OF ALL LABOR, MATERIALS, EQUIPMENT, PERMITS, FEES, INSPECTIONS, TESTS, INSURANCE, ETC. REQUIRED FOR THE COMPLETION OF THE AIR CONDITIONING SYSTEM SHOWN ON THE DRAWINGS AND/ OR LISTED BELOW. 2. VENTILATION DUCTWORK SHALL BE GALVANIZED STEEL WITH GAUGES, DUCT CONSTRUCTION, BRACING AND SUSPENSION IN ACCORDANCE WITH THE RECOMMENDATIONS SET FORTH IN THE LATEST EDITION OF THE A.S.H.R.A.E. GUIDE AND S.M.A.C.N.A. STANDARDS. DUCT SIZES SHOWN ARE "INSIDE" DIMENSIONS. VERIFY EXACT LOCATION OF DUCT WITH RESPECT TO STRUCTURE BEFORE FABRICATION. 3. FLEXIBLE DUCT SHALL BE STEEL HELIX WIRE ON 7/8" CENTERS, ENCAPSULATED IN A CONTINUOUS SOFT VINYL FILM, JOINED BY MOLECULAR WELDING TO FORM AN AIR TIGHT INNER CORE, THE CORE IS TO BE INSULATED WITH FIBERGLASS INSULATION (R-6), AND SHEATHED IN A REINFORCED, ALUMINUM METALIZED POLYESTER VAPOR BARRIER JACKET. PROVIDE SPIN COLLAR WITH DAMPER AND EXTRACTOR WHERE FLEXIBLE DUCT IS CONNECTED TO RECTANGULAR DUCTWORK. DAMPER ACTUATOR SHALL BE EXTENDED OUTSIDE INSULATION. 4. AIR CONDITIONING SUPPLY AND RETURN DUCTWORK SHALL BE 1-1/2" (R-6 MIN.) FIBERGLASS U.L. 181 LISTED, CLASS I AIR DUCT. DUCTWORK SHALL BE FABRICATED IN ACCORDANCE WITH S.M.A.C.N.A. STANDARDS. (R-6 TOP LEVEL, R-4.2 IN OTHER LEVELS). 5. EXTG. TEMPERATURE CONTROL ARE ROOM PROG. THERMOSTAT FOR HEATING/COOLING WITH STAGES AS REQUIRED. 6. ALL WORK SHALL BE COORDINATED WITH OTHER TRADES TO AVOID INTERFERENCE WITH THE PROGRESS OF CONSTRUCTION AND IN STRICT COMPLIANCE WITH ALL APPLICABLE CODES AND STANDARDS.& THE FLORIDA MECH. CODE 2014. 7. MECHANICAL CONTRACTOR SHALL VERIFY DIRECTION OF EXISTING STRUCTURE BEFORE INSTALLATION OF EQUIPMENTS AND DUCTWORK. SHOULD ANY DISCREPANCIES BE FOUND CONTACT ENGINEER. 8. GUARANTEES: A. CONTRACTOR SHALL GUARANTEE ALL MATERIALS AND WORKMANSHIP FREE FROM DEFECTS FOR A PERIOD OF NOT LESS THAN A 1 YEAR FROM DATE OF ACCEPTANCE. 9. TESTING: A. ALL REFRIGERANT HIGH SIDE PIPING TO 300 PSIG. LOW SIDE TO 150 PSIG. AFTER TESTING, EVACUATE SYSTEM TO 28% MERCURY GAUGE PRESSURE WITH VACUUM PUMP. HOLD FOR 25 HOURS WITH PUMP OFF. BREAK VACUUM WITH REFRIGERANT. B. BALANCE AIR SYSTEM REPORT IS REQUIRED 10. ALL MECHANICAL SYSTEMS ARE TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE SECTIONS OF THE FLORIDA BUILDING CODE 2014, NFPA STANDARDS, PLANS AND SPECIFICATIONS.
AutoCAD SHX Text
HVAC GENERAL NOTES
AutoCAD SHX Text
1
AutoCAD SHX Text
2
(E)12"Ø S/A DUCT (E)10"Ø S/A DUCT
(E)8
"Ø S
/A D
UC
T
(E)12"x12"S/A GRILLE
(E)12"x8" S/AGRILLE
6"Ø DUCT
(E)12"x8" S/AGRILLE
6"Ø DUCT
(E)16"x6" S/AGRILLE
(E)12"x12"S/A GRILLE
(E)28"x6"S/A GRILLE
T
(E)1
4"X1
4" S
/A D
UC
T
(E)12"x12"S/A GRILLE
(E)12"x12"S/A GRILLE
(E)1
4"X1
4" S
/A D
UC
T(E
)14"
X10"
S/A
DU
CT
(E)12"x8" S/AGRILLE
(E)10"Ø S/A DUCT (E)8"Ø S/A DUCT
(E)22"x6"S/A GRILLE
(E)24"x6"S/A GRILLE
(E)6
"Ø S
/A D
UC
T
(E)8"x8" S/AGRILLE
EF-1 75 CFM4"Ø MTL. DUCT
W/ V.T.R.
EF-1 75 CFM4"Ø MTL. DUCT
W/ V.T.R.
(E)M
INI-S
PLI
T 1
(E)12"x6" R/ATRX GRILLE
(E)12"x6" R/ATRX GRILLE
(E)12"x6" R/ATRX GRILLE
(E)1
2"x6
" R/A
TRX
GR
ILLE
(E)12"x6" R/ATRX GRILLE
(E)12"x6" R/ATRX GRILLE
(E)12"x6" R/ATRX GRILLE
FLEX DUCT SYSTEM DETAIL
DRY WELL DETAIL
SCALE: N.T.S.
CONDENSATE DRAIN PIPING DETAIL
SCALE: N.T.S.
MECHANICAL PLENUM ATTACHMENT DETAIL
(PER SMACNA REQUIREMENTS
SCALE: N.T.S.
FLEXIBLE DUCT
CONNECTION DETAIL
SCALE: N.T.S.
FLEXIBLE DUCT
SUPPORT DETAIL
SCALE: N.T.S.
RIGID DUCT HANGER DETAIL
SCALE: N.T.S.
SECOND FLOOR MECHANICAL PLAN
SCALE: 1/4" = 1'-0"
SHEET
M-2.0
PROJECT NO.
16-0329
DATE
11-18-2016
SEAL
NO. REVISION/ISSUE DATE
DRAWN BY: J.P.C.
CHECKED BY: V.L.C.
AF
TE
R-T
HE
-F
AC
T IN
TE
RIO
R A
LT
ER
AT
IO
N
400 A
NS
IN
LLC
400 A
NS
IN
B
LV
D 400A
HA
LLA
ND
ALE
B
EA
CH
, F
LO
RID
A 33009
VLC
O
NE
, IN
C.
5365 N
W 126 D
RIV
E
CO
RA
L S
PR
IN
GS
, F
L 33076
954-864-2775
VANDIN CALITU, P.E.
FL. REG. NO. 57982
AutoCAD SHX Text
(N)
AutoCAD SHX Text
(N)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
AHU 2
AutoCAD SHX Text
CLASS-1 FLEX DUCT
AutoCAD SHX Text
AND STEEL WIRE
AutoCAD SHX Text
SLEEVE W/ HANGING LIP
AutoCAD SHX Text
GALVANIZED SHEET METAL
AutoCAD SHX Text
(TYPICAL)
AutoCAD SHX Text
TYPICAL BRANCH DUCT
AutoCAD SHX Text
TAKE-OFFS
AutoCAD SHX Text
COLLAR CONNECTION
AutoCAD SHX Text
GALVANIZED SHEET METAL
AutoCAD SHX Text
STEEL WIRE HANGERS
AutoCAD SHX Text
TYPICAL CHANNEL AND
AutoCAD SHX Text
TRIANGLE PLENUM
AutoCAD SHX Text
CLASS-1 FIBERGLASS
AutoCAD SHX Text
FITTING
AutoCAD SHX Text
(TYPICAL)
AutoCAD SHX Text
CLASS-1 FLEX DUCT
AutoCAD SHX Text
SUPPLY TRUNK LINE
AutoCAD SHX Text
SCALE: N.T.S.
AutoCAD SHX Text
MAX. SAG 1/2" PER FOOT
AutoCAD SHX Text
OF SUPPORT SPACING
AutoCAD SHX Text
5'-0" MAXIMUM
AutoCAD SHX Text
1 1/2" MINIMUM
AutoCAD SHX Text
26 ga min.
AutoCAD SHX Text
12 GAUGE
AutoCAD SHX Text
%%C WIRE
AutoCAD SHX Text
DIFFUSER
AutoCAD SHX Text
LOW VELOCITY SUPPLY AIR PLENUM R-6 INSULATION
AutoCAD SHX Text
SEAL DUCT JOINT WITH
AutoCAD SHX Text
DUCT SEALER & TAPE.
AutoCAD SHX Text
12" MINIMUM
AutoCAD SHX Text
A. H. U.
AutoCAD SHX Text
1-1/2"
AutoCAD SHX Text
1-1/2" CONDENSATE DRAIN PIPE ABOVE
AutoCAD SHX Text
FIN. GRADE FOR CONT. SEE A/C PLAN.
AutoCAD SHX Text
P-TRAP
AutoCAD SHX Text
3"
AutoCAD SHX Text
DRILLED ON TOP FOR VENT.
AutoCAD SHX Text
PVC CAP WITH 1/8" DIA. HOLE
AutoCAD SHX Text
PVC SCH. 40 PIPING.
AutoCAD SHX Text
GFM CLOSURE
AutoCAD SHX Text
FLANGE
AutoCAD SHX Text
SCREW POP RIVET OR SPOT WELD TO EQUIPMENT FLANGE
AutoCAD SHX Text
22 GAUGE SHEET METAL 1'X3"
AutoCAD SHX Text
FIBROUS GLASS DUCT
AutoCAD SHX Text
10" X 1 " SHEET 14" SHEET METAL SCREWS
AutoCAD SHX Text
2 " SQUARE WASHERS 12" SQUARE WASHERS 12" MAX O.C. MIN. 2 PER SIDE
AutoCAD SHX Text
1-1/2" PVC COND. LINE
AutoCAD SHX Text
SLAB
AutoCAD SHX Text
STONE
AutoCAD SHX Text
GRADE
AutoCAD SHX Text
INSULATED FLEX. DUCT R-6 INSULATION
AutoCAD SHX Text
SEAL JOINT WITH DUCT SEALER & TAPE.
AutoCAD SHX Text
STEEL JOIST ABOVE
AutoCAD SHX Text
(N) 2.5" SUPPORT CHANNEL W/16 GA. WIRE TIES @ 5'-0"
AutoCAD SHX Text
(N) S/A RIGID DUCT 1" BOARD
AutoCAD SHX Text
R.T.U. 1
AutoCAD SHX Text
MECHANICAL EQUIP SCHEDULE
AutoCAD SHX Text
MANUFACTURER
AutoCAD SHX Text
MODEL
AutoCAD SHX Text
TOTAL COOLING CAP. BTU/H
AutoCAD SHX Text
TOTAL SENSIBLE CAP. BTU/H
AutoCAD SHX Text
SUPPLY AIR CFM
AutoCAD SHX Text
VOLTAGE
AutoCAD SHX Text
MCA/MOCP
AutoCAD SHX Text
SEER/EER
AutoCAD SHX Text
OPERATING UNIT LBS.
AutoCAD SHX Text
DIMENSIONS L x W x H (IN.)
AutoCAD SHX Text
REF.
AutoCAD SHX Text
REF. LINES.
AutoCAD SHX Text
WATTS
AutoCAD SHX Text
MANUFACTURER
AutoCAD SHX Text
MODEL
AutoCAD SHX Text
TOTAL COOLING CAP.
AutoCAD SHX Text
TOTAL SENSIBLE CAP.
AutoCAD SHX Text
SUPPLY AIR CFM
AutoCAD SHX Text
VOLTAGE
AutoCAD SHX Text
MCA/MOCP
AutoCAD SHX Text
SEER/EER
AutoCAD SHX Text
OPERATING UNIT LBS.
AutoCAD SHX Text
DIMENSIONS L x W x H (IN.)
AutoCAD SHX Text
WATTS
AutoCAD SHX Text
-
AutoCAD SHX Text
120,000
AutoCAD SHX Text
-
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
3 208/230V 60HZ
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
RHEEM
AutoCAD SHX Text
RKLB-A120CL
AutoCAD SHX Text
C.U. 1
AutoCAD SHX Text
A.H.U. 1
AutoCAD SHX Text
3/8" LIQ. / 7/8" GAS (O.D.)
AutoCAD SHX Text
RHEEM
AutoCAD SHX Text
FXM406000A1
AutoCAD SHX Text
56,500
AutoCAD SHX Text
39,100
AutoCAD SHX Text
1,800
AutoCAD SHX Text
1 208/230V 60HZ
AutoCAD SHX Text
38/40
AutoCAD SHX Text
-
AutoCAD SHX Text
162
AutoCAD SHX Text
24.5x24.5x55.5
AutoCAD SHX Text
5.0 kW
AutoCAD SHX Text
1 208/230V 60HZ
AutoCAD SHX Text
RHEEM (OR APPROVED EQ.)
AutoCAD SHX Text
E121018977
AutoCAD SHX Text
R.T.U. 2
AutoCAD SHX Text
-
AutoCAD SHX Text
120,000
AutoCAD SHX Text
-
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
1 208/230V 60HZ
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
INTERNATIONAL COMFORT PRODUCTS, LLC
AutoCAD SHX Text
PAD460000K000CA
AutoCAD SHX Text
C.U. 2
AutoCAD SHX Text
A.H.U. 2
AutoCAD SHX Text
3/8" LIQ. / 7/8" GAS (O.D.)
AutoCAD SHX Text
RHEEM
AutoCAD SHX Text
FEM4X600B1
AutoCAD SHX Text
56,500
AutoCAD SHX Text
39,100
AutoCAD SHX Text
1,800
AutoCAD SHX Text
1 208/230V 60HZ
AutoCAD SHX Text
38/40
AutoCAD SHX Text
-
AutoCAD SHX Text
162
AutoCAD SHX Text
24.5x24.5x55.5
AutoCAD SHX Text
5.0 kW
AutoCAD SHX Text
1 208/230V 60HZ
AutoCAD SHX Text
RHEEM (OR APPROVED EQ.)
AutoCAD SHX Text
E100615353
AutoCAD SHX Text
C.U. 3
AutoCAD SHX Text
A.H.U. 3
AutoCAD SHX Text
3/8" LIQ. / 7/8" GAS (O.D.)
AutoCAD SHX Text
COMFORT STAR
AutoCAD SHX Text
CCH012CA-410(I)
AutoCAD SHX Text
800
AutoCAD SHX Text
1 208/230V 60HZ
AutoCAD SHX Text
5.0 kW
AutoCAD SHX Text
12,000
AutoCAD SHX Text
8,000
AutoCAD SHX Text
1 208/230V 60HZ
AutoCAD SHX Text
COMFORT STAR
AutoCAD SHX Text
-
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
12,000
AutoCAD SHX Text
8,000
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
AutoCAD SHX Text
EXTG
RTU 1 RTU 2
AHU 2
AHU 1
MINI-SPLITCU 1
ROOFTOP MECHANICAL PLAN
SCALE: 1/4" = 1'-0"
SHEET
M-3.0
PROJECT NO.
16-0329
DATE
11-18-2016
SEAL
NO. REVISION/ISSUE DATE
DRAWN BY: J.P.C.
CHECKED BY: V.L.C.
AF
TE
R-T
HE
-F
AC
T IN
TE
RIO
R A
LT
ER
AT
IO
N
400 A
NS
IN
LLC
400 A
NS
IN
B
LV
D 400A
HA
LLA
ND
ALE
B
EA
CH
, F
LO
RID
A 33009
VLC
O
NE
, IN
C.
5365 N
W 126 D
RIV
E
CO
RA
L S
PR
IN
GS
, F
L 33076
954-864-2775
VANDIN CALITU, P.E.
FL. REG. NO. 57982
FIRST FLOOR ELECTRIC PLAN
SCALE: 1/4" = 1'-0"
SHEET
E-1.0
PROJECT NO.
16-0329
DATE
04-28-2016
SEAL
NO. REVISION/ISSUE DATE
DRAWN BY: J.P.C.
CHECKED BY: V.L.C.
AF
TE
R-T
HE
-F
AC
T IN
TE
RIO
R A
LT
ER
AT
IO
N
400 A
NS
IN
LLC
400 A
NS
IN
B
LV
D 400A
HA
LLA
ND
ALE
B
EA
CH
, F
LO
RID
A 33009
VLC
O
NE
, IN
C.
5365 N
W 126 D
RIV
E
CO
RA
L S
PR
IN
GS
, F
L 33076
954-864-2775
VANDIN CALITU, P.E.
FL. REG. NO. 57982
RISER DIAGRAM
SCALE: N.T.S.
1 J.P.C. 6/23/2016
2 J.P.C. 11/18/2016
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
GFCI
AutoCAD SHX Text
GFCI
AutoCAD SHX Text
(E)E2-47
AutoCAD SHX Text
(E)E2-47
AutoCAD SHX Text
(N)E2-47
AutoCAD SHX Text
(N)E2-47
AutoCAD SHX Text
(N)E2-47
AutoCAD SHX Text
(N)E2-47
AutoCAD SHX Text
(N)E2-47
AutoCAD SHX Text
(N)E2-43
AutoCAD SHX Text
(N)E2-43
AutoCAD SHX Text
(N)E2-43
AutoCAD SHX Text
(N)E2-43
AutoCAD SHX Text
(N)E2-43
AutoCAD SHX Text
(N)E2-43
AutoCAD SHX Text
(N)E2-43
AutoCAD SHX Text
(N)E2-43
AutoCAD SHX Text
(N)E2-60
AutoCAD SHX Text
(N)E2-60
AutoCAD SHX Text
REF (N)E2-60 GFCI
AutoCAD SHX Text
(E)E2-53
AutoCAD SHX Text
(E)E2-53
AutoCAD SHX Text
(E)E2-53
AutoCAD SHX Text
(E)E2-53
AutoCAD SHX Text
(N)E2-48
AutoCAD SHX Text
(N)E2-48
AutoCAD SHX Text
(N)E2-48
AutoCAD SHX Text
(N)E2-48
AutoCAD SHX Text
(N)E2-44
AutoCAD SHX Text
(N)E2-44
AutoCAD SHX Text
(N)E2-44
AutoCAD SHX Text
(N)E2-44
AutoCAD SHX Text
(N)E2-44
AutoCAD SHX Text
(N)E2-44
AutoCAD SHX Text
(N)E2-44
AutoCAD SHX Text
(N)E2-44
AutoCAD SHX Text
(N)E2-44
AutoCAD SHX Text
(N)E2-44
AutoCAD SHX Text
(N)E2-44
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(N)E2-54
AutoCAD SHX Text
(E)E2-43
AutoCAD SHX Text
(E)E2-47
AutoCAD SHX Text
(E)E2-47
AutoCAD SHX Text
(E)E2-47
AutoCAD SHX Text
(E)E2-47
AutoCAD SHX Text
(E)E2-47
AutoCAD SHX Text
(E)E2-47
AutoCAD SHX Text
(E)E2-54
AutoCAD SHX Text
(E)E2-54
AutoCAD SHX Text
(E)E2-54
AutoCAD SHX Text
(E)E2-54
AutoCAD SHX Text
(E)E2-54
AutoCAD SHX Text
(E)E2-54
AutoCAD SHX Text
(E)E2-54
AutoCAD SHX Text
(E)E2-54
AutoCAD SHX Text
(E)E2-44
AutoCAD SHX Text
(E)E2-44
AutoCAD SHX Text
(E)E2-44
AutoCAD SHX Text
(E)E2-54
AutoCAD SHX Text
(E)E2-43
AutoCAD SHX Text
(E)E2-43
AutoCAD SHX Text
(E)E2-43
AutoCAD SHX Text
(E)E2-54
AutoCAD SHX Text
AHU 1
AutoCAD SHX Text
(E)PANEL C
AutoCAD SHX Text
24" CLEAR WORKING SPACE
AutoCAD SHX Text
(E)PANEL C1
AutoCAD SHX Text
(E)PANEL E1
AutoCAD SHX Text
(E)PANEL E2
AutoCAD SHX Text
24" CLEAR WORKING SPACE
AutoCAD SHX Text
(E)PANEL HE
AutoCAD SHX Text
24" CLEAR WORKING SPACE
AutoCAD SHX Text
24" CLEAR WORKING SPACE
AutoCAD SHX Text
(E)PANEL D
AutoCAD SHX Text
FD
AutoCAD SHX Text
FD
AutoCAD SHX Text
FD
AutoCAD SHX Text
FD
AutoCAD SHX Text
FD
AutoCAD SHX Text
FD
AutoCAD SHX Text
WALL TYPE LEGEND: EXTG 8" CMU EXTERIOR WALL EXTG 4" INTERIOR 25 GA MTL. NON-LOAD BEARING PARTITION NEW 4" INTERIOR 25 GA MTL. NON-LOAD BEARING PARTITION 4" 2-HR FIRE RATED NON-BEARING PARTITION (UL U419) TO BOTTOM OF CONC. ROOF DECK
AutoCAD SHX Text
W1
AutoCAD SHX Text
W2
AutoCAD SHX Text
W3
AutoCAD SHX Text
W4
AutoCAD SHX Text
GROUND
AutoCAD SHX Text
(E)
AutoCAD SHX Text
M
AutoCAD SHX Text
(E)400A MDP
AutoCAD SHX Text
120/240V 3
AutoCAD SHX Text
200A
AutoCAD SHX Text
200A
AutoCAD SHX Text
(E) PANEL-E1 NO LOAD ALL BREAKERS ARE SPARE
AutoCAD SHX Text
120/240V 3 /4WHI-LEG
AutoCAD SHX Text
(E) PANEL-E2 MLO 225A
AutoCAD SHX Text
120/240V 3 /4WHI-LEG
AutoCAD SHX Text
(NO WIRES CONNECTED)
AutoCAD SHX Text
(E) 200A DISC. (NOT IN USE)
AutoCAD SHX Text
120/240V 3
AutoCAD SHX Text
(E)112.5 STEP-UP TRX
AutoCAD SHX Text
(E) 80A DISC.
AutoCAD SHX Text
277/480V 3
AutoCAD SHX Text
(E) 150A PANEL-HE (NOT IN USE)
AutoCAD SHX Text
277/480V 3
AutoCAD SHX Text
TO RECTIFIER
AutoCAD SHX Text
(E)RACEWAY
AutoCAD SHX Text
(E) PANEL-D 200A
AutoCAD SHX Text
120/240V 3 /4W
AutoCAD SHX Text
(E)RACEWAY
AutoCAD SHX Text
(E) PANEL-C1 100A MLO
AutoCAD SHX Text
120/240V 1 /3W
AutoCAD SHX Text
(E) PANEL-C 225A
AutoCAD SHX Text
120/240V 3 /4W
AutoCAD SHX Text
100A
AutoCAD SHX Text
100A
AutoCAD SHX Text
100A
AutoCAD SHX Text
100A
AutoCAD SHX Text
100A
AutoCAD SHX Text
(E) PANEL-F 125A TYPE 1 MLO
AutoCAD SHX Text
120/240V 1 /3W
AutoCAD SHX Text
(E) (2)#1 CU W/ #6 CU GND IN 1 " COND.12" COND.
AutoCAD SHX Text
SECOND FLOOR
AutoCAD SHX Text
FIRST FLOOR - OFFICE
AutoCAD SHX Text
FIRST FLOOR - WAREHOUSE
AutoCAD SHX Text
EXTERIOR
AutoCAD SHX Text
(E)GROUND
AutoCAD SHX Text
(E)GROUND
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)(3)3/0 CU W/ #6 CU GND. IN 3" COND.
AutoCAD SHX Text
(E)(3)3/0 CU W/#4 GND IN 2" COND.
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)TO FPL TRX
AutoCAD SHX Text
(E)(3)3/0 CU W/ #4 CU GND. IN 2" COND.
AutoCAD SHX Text
(NO WIRES CONNECTED)
AutoCAD SHX Text
(NO WIRES CONNECTED)
AutoCAD SHX Text
(E)(3)3/0 CU W/ #4 CU GND IN 1 " 14" COND.
AutoCAD SHX Text
(E) (2)#3 CU W/ #4 CU GND IN 1 " COND.14" COND.
AutoCAD SHX Text
200A
AutoCAD SHX Text
(E)(3)3/0 CU W/ 4 CU GND.
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
2
PANEL "D"
TYPE: NEMA 1
AMPACITY: 200
VOLTAGE: 120/240V 3Ø/4W
MAINS: MLO
LOCATION: WAREHOUSE
FED FROM: MDP
CKT
NO.
DESCRIPTION
WIRE
SIZE
COND.
SIZE
TOTAL
KVA
POLEAMPS
1GEN LIEXTGEXTG1.5120
CKT
NO.
DESCRIPTION
WIRE
SIZE
COND.
SIZE
TOTAL
KVA
POLE AMPS
2 RTU 2 EXTG EXTG 10.0 3 70
3SPACE 4
5WATER HEATEREXTGEXTG3.0250 6
7 8 GEN LI 1.0 1 20
9 10 SPACE
11GEN LI1.01 GEN LI 1.0 1
13GEN LI1.01 GEN LI 1.0 1
15
1718.752125
19
21
23
25
27
29
31
33
35
37
39
41
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
DEMAND LOAD CALCULATIONS
TOTAL CONNECTED LOAD (LESS A/C) @ 100% = 9,500 VA
1ST 10,000 VA @ 100% = 9,500 VA
REMAINING @ 40% = 0 VA
AIR CONDITIONERS @ 65% = 6,500 VA
PANEL "F" @ 100% = 18,750 VA
TOTAL = 34,750 VA
CURRENT PER PHASE (VA) / (240V) *1.732 = 83.60 AMPS
200 OK
FEEDERS: (E)(3)3/0 W/ #4 GND. IN 2"
COND.
MOUNTING: SURFACE
EXTG EXTG
SPACE
EXTGEXTG20
EXTGEXTG20
20EXTG EXTG
20EXTG EXTG
WATER HEATER3.0260
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACE
SPACEEXTGEXTG
EXTGEXTG
PANEL F
SECOND FLOOR ELECTRIC PLAN
SCALE: 1/4" = 1'-0"
SHEET
E-2.0
PROJECT NO.
16-0329
DATE
04-28-2016
SEAL
NO. REVISION/ISSUE DATE
DRAWN BY: J.P.C.
CHECKED BY: V.L.C.
AF
TE
R-T
HE
-F
AC
T IN
TE
RIO
R A
LT
ER
AT
IO
N
400 A
NS
IN
LLC
400 A
NS
IN
B
LV
D 400A
HA
LLA
ND
ALE
B
EA
CH
, F
LO
RID
A 33009
VLC
O
NE
, IN
C.
5365 N
W 126 D
RIV
E
CO
RA
L S
PR
IN
GS
, F
L 33076
954-864-2775
VANDIN CALITU, P.E.
FL. REG. NO. 57982
1 J.P.C. 6/23/2016
2 J.P.C. 11/18/2016
AutoCAD SHX Text
(N)
AutoCAD SHX Text
(N)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
EXISTING ELECTRIC TO REMAIN
AutoCAD SHX Text
(N)F-7
AutoCAD SHX Text
AHU 2
AutoCAD SHX Text
(N)F-7
AutoCAD SHX Text
(N)F-7
AutoCAD SHX Text
(N)F-7
AutoCAD SHX Text
(N)F-7
AutoCAD SHX Text
(N)F-7
AutoCAD SHX Text
(N)F-7
AutoCAD SHX Text
(N)F-7
AutoCAD SHX Text
(N)F-7
AutoCAD SHX Text
(N)F-7
AutoCAD SHX Text
(N)F-7
AutoCAD SHX Text
(N)F-7
AutoCAD SHX Text
(E)F-1 @48" A.F.F.
AutoCAD SHX Text
(E)F-1
AutoCAD SHX Text
(E)F-1
AutoCAD SHX Text
(E)F-1 @ 36" A.F.F.
AutoCAD SHX Text
(N)F-1
AutoCAD SHX Text
(N)F-1
AutoCAD SHX Text
(N)F-3
AutoCAD SHX Text
(N)F-3
AutoCAD SHX Text
(N)F-3
AutoCAD SHX Text
(N)F-3
AutoCAD SHX Text
(N)F-3
AutoCAD SHX Text
(N)F-3
AutoCAD SHX Text
(N)F-3
AutoCAD SHX Text
(N)F-3
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
GFCI
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-6
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-5
AutoCAD SHX Text
(N)F-6
AutoCAD SHX Text
(E)F-6
AutoCAD SHX Text
(E)F-3
AutoCAD SHX Text
(E)F-3
AutoCAD SHX Text
(E)F-3
AutoCAD SHX Text
(E)F-3
AutoCAD SHX Text
(E)F-3
AutoCAD SHX Text
(E)F-3
AutoCAD SHX Text
(E)F-6
AutoCAD SHX Text
(E)F-3
AutoCAD SHX Text
(E)PANEL F
AutoCAD SHX Text
24" CLEAR WORKING SPACE
AutoCAD SHX Text
1
AutoCAD SHX Text
2
4"Ø MTL. DUCT 4"Ø MTL. DUCT
(E)1
8"X1
0" E
XH D
UC
T
(E) BAROMETRICEXH DAMPER
(E)24"x6"S/A GRILLE
(E)6
"Ø S
/A D
UC
T
(E)8"x8" S/AGRILLE
EF-1 75 CFM4"Ø MTL. DUCT
W/ V.T.R.
EF-1 75 CFM4"Ø MTL. DUCT
W/ V.T.R.
(E)M
INI-S
PLI
T 1
(E)12"x6" R/ATRX GRILLE
(E)10"X8" S/A DUCT(E)12"x8" S/AGRILLE
(E)12"x10"S/A GRILLE
(E)12"X12" S/A DUCT
(E)1
2"X1
2" S
/A D
UC
T
(E)12"x8" S/AGRILLE
(E)12"x8" S/AGRILLE
(E)12"X8" S/A DUCT (E)16"X8" S/A DUCT
(E)1
4"X1
2" S
/A D
UC
T
(E)12"x8" S/AGRILLE
(E)1
8"X1
2" S
/A D
UC
T(E
)22"
X12"
S/A
DU
CT
(E)12"x8" S/AGRILLE
(E)10"x6" S/AGRILLE
(E)14"x6" S/AGRILLE
(E)1
0"Ø
S/A
DU
CT
(E)1
0"Ø
S/A
DU
CT
(E)1
0"Ø
S/A
DU
CT
(E)12"x8" S/AGRILLE
(E)12"x8" S/AGRILLE
(E)12"x6" R/ATRX GRILLE
(E)12"x6" R/ATRX GRILLE
(E)12"x6" R/ATRX GRILLE
(E)1
2"x6
" R/A
TRX
GR
ILLE
(E)1
2"x6
" R/A
TRX
GR
ILLE
(E)12"x6" R/ATRX GRILLE
(E)1
2"x6
" R/A
TRX
GR
ILLE
EF-1 75 CFM4"Ø MTL. DUCT
EF-1 75 CFM4"Ø MTL. DUCT
(E)1
8"X1
0" E
XH D
UC
T
(E) BAROMETRICEXH DAMPER
RTU 1
(E)10"X8" S/A DUCT
(E)24"x24"10"Ø S/A GRILLE(E)24"x24"
10"Ø S/A GRILLE
(E)24"x24"10"Ø S/A GRILLE
(E)24"x24"10"Ø S/A GRILLE
(E)24"x24"10"Ø S/A GRILLE
(E)24"x24"10"Ø S/A GRILLE
(E)24"x24"R/A GRILLE
(E)24"x24"R/A GRILLE
(E)14"Ø(E)14"Ø(E)14"Ø
(E)14"Ø
(E)8
"X14
" S/A
DU
CT
RTU 2
(E)14"X12" S/A DUCT
(E)24"x6"S/A GRILLE
(E)24"x6"S/A GRILLE
(E)1
4"X1
2" S
/A D
UC
T
(E)12"x12" R/ATRX GRILLE
(E) ROOF MOUNTEDGOOSENECK VENT
(E) EXH. FAN
(E)12"x10" S/A GRILLE6"Ø FLEX DUCT
W/ FIRE DAMPER
EXTG FIRST FLOOR PLUMBING PLAN
SCALE: 3/8" = 1'-0"
SHEET
P-1.0
PROJECT NO.
16-0329
DATE
04-28-2016
SEAL
NO. REVISION/ISSUE DATE
DRAWN BY: J.P.C.
CHECKED BY: V.L.C.
AF
TE
R-T
HE
-F
AC
T IN
TE
RIO
R A
LT
ER
AT
IO
N
400 A
NS
IN
LLC
400 A
NS
IN
B
LV
D 400A
HA
LLA
ND
ALE
B
EA
CH
, F
LO
RID
A 33009
VLC
O
NE
, IN
C.
5365 N
W 126 D
RIV
E
CO
RA
L S
PR
IN
GS
, F
L 33076
954-864-2775
VANDIN CALITU, P.E.
FL. REG. NO. 57982
EXTG SECOND FLOOR PLUMBING PLAN
SCALE: 3/8" = 1'-0"
KEY PLAN
SCALE: 1/8" = 1'-0"
SCOPE OF WORK AREA
SECOND FLOOR PLUMBING
ISOMETRIC PLAN
SCALE: N.T.S.
FIRST FLOOR PLUMBING
ISOMETRIC PLAN
SCALE: N.T.S.
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
(E)
AutoCAD SHX Text
EXTG 3" SANITARY LINE.
AutoCAD SHX Text
(N) SINK 1 " P-TRAP W/ 12" P-TRAP W/ C/O & A.A.V.
AutoCAD SHX Text
(N) SINK 1 " P-TRAP W/ 12" P-TRAP W/ C/O & A.A.V.
AutoCAD SHX Text
P1
AutoCAD SHX Text
P1
AutoCAD SHX Text
PROPOSED PLUMBING SCOPE OF WORK: NEW SINK W/ 1 " P-TRAP SANITARY CONNECTION W/ 12" P-TRAP SANITARY CONNECTION W/ C/O & A.V.V. NEW W/C W/ 3" SANITARY LINE. TOILET FLANGE TO MEET FIN. FL. ELEVATION. NOTE: ALL OTHER ITEMS EXISTING TO REMAIN AND NOT ALL OTHER ITEMS EXISTING TO REMAIN AND NOT INCLUDED IN SCOPE OF WORK.
