Embed Size (px)
Citation preview
®CADISON Project-Engineer
The Module for Project and Plant-Engineers
Conceptual Engineering®CADISON Project-Engineer is your tool for design, calculation
and detailing of your plant by adding all required components (objects) to the project while taking them from the catalogue. Simple Drag & Drop operations are sufficient with completely text based operations without the obligation to have a graphical environment. This approach is called “Conceptual Engineering”.
®The target of CADISON Project-Engineer is to provide the userwith data for calculation without large efforts and already at a very early time.
Dynamic Cooperation with different Disciplines®CADISON offers different disciplines to the users, such as process engineering, project management, planning,
design, electrical engineering and calculation, so that a common data pool is already available for work on the same project in a very early project phase.
No RedundancyAll information – independent of the workplace where they are generated or modified – is directly deposited in the project. Consequently,it is sufficient to depict the object information (e.g. the nominal delivery rate of a pump) only once, and subsequently it is immediately available to all users. It is irrelevant whether or not the modification is made on the object in the plant structure tree, in the P&I diagram, in the 3D layout plan, in the electric circuit diagram or in another module. In case one user of the above pump adds a parameter (e.g. the nominal delivery rate) another user may adapt the nominal diameters of connections accordingly.
All different modules incorporate only “another mode of consideration” of the project. The concept of object-orienteddatabase ensures 100 % data consistency and offers the strategic advantage of dynamic work in project groups.
Plant Conception®CADISON Project-Engineer helps the project engineer to design a specific plant. A number of questions must be
answered, such as:· Which are the mass balances?· Which fluids shall be used?· Which core components shall be included in the plant?· What is the basis for plant structuring?· Which components are required?· Which equipment is required?· Which pipelines shall be included in design?
The above data is used and inserted by Drag & Drop in the structure tree and supplemented by detail information, if applicable. Data may be further developed and detailed at a later date or even in parallel already e.g. in P&ID-Designer
®or 3D-Designer. CADISON allows you to take your own decision on the method and selection of module for project processing.
Project Calculation and Tendering®Complete project calculation up to final tender preparation is directly possible from CADISON Project-Engineer.
Even calculated values may be added to the actual technical data and information. Said calculation data can becalled up either as fixed cost items or calculated through time objects. The deposited data can be summarized assingle, group or project items. Capital structures can be developed and used for direct support in the tender planning stage through use of self-defined text modules.Independent Report Generator
Project-Engineer
®All data prepared with CADISON ProjectEngineer may be put out through the integral report generator in most different forms and formats.For example, such data could be a list of valves and fittings or an advance payment so that the required quantity structure can be calculated.All reports can be revised and have release mechanisms. Reports are
®directly stored within the CADISON Project.
ITandFactory GmbH Bad Soden, GermanyPhone: +49 6196 93490-0E-Mail: [email protected]
Neilsoft Ltd. Pune, IndiaPhone: +91 20 3054 2200E-Mail: [email protected]
Neilsoft Inc. Canton, USAPhone: (734)-459-1100E-Mail: [email protected]
Media- and Mass-Balances > BasicFlow-Diagram > Tender Planning > ProcessFlow-Diagram > EquipmentList > Prelimary Layout > Specifications and Suppliers > Instrumentation > Ressource Management > Calculation > Revision-Management > Project-Analysis > Process-Calculation > Pipe-Specification > P&I Diagram > Specification for Inquiry > Structural/Statics > Layout Planning > Installation Planning > Equipment Planning > Structural and Piping Design > General Arrangement Drawings > Piping Design > Piperack Layout > Electrical Design > Report Extraction (BOM) > Materials Management > Maintenance and Operations > Post Costing Analysis and Documentation
®CADISON Project Engineer – Integrated Digital Plant Model
Business Benefits
?One click – All Information ?More projects with less resources within shortest time?Transparency in all engineering projects?Selective and controlled implementation of company
standards?Early provision of continuously updated information?Complete project survey for the product manager?Accelerated communication free from losses through
central data management?Quick finding through selective search for project
information?Multi-Site work of split project groups (all modules)?Full multi-language capacity through Unicode (e.g.
simple changeover between English and Russian and
vice versa) together with multi-language inscriptions?Implementation of complete projects in one platform by
all parties involved?Central and redundancy-free data management of all
project elements?Revision safety
Key Features
?Central graphics-independent project platform – Key
turning point of the project ?Plausibility check (logic examination of objects and their
content)?Easy definition of reports and lists (Word, Excel, Access
etc.)?Structured user and project management – Integrated
roll concept?Revision of objects and documents?Identification structure that can be freely defined (DIN,
KKS and optional company standards)?Integrated viewer for viewing of plans and documents?Bidirectional coupling to ERP systems?Cost calculation in the project for all phases and
resources (staff, material etc.)?Automatic creation of complete project structure as PDF?Modern, ergonomic and intuitively learnable user
guidance?Across-trade object navigation with visual highlight
function
