Project 9 - Integrated - Universiti Sains Malaysia · PROJECT 9 ‐INTEGRATED PROJECT (PLANNING, DESIGNING & MANAGING) (5 recommended sites) PROJECT 9 ‐INTEGRATED PROJECT (PLANNING

PROJECT 9: INTEGRATED PROJECT

Issued by: Sr Dr. Md Azree Othuman Mydin

Planning, Designing and Managing

PROJECT 9 ‐ INTEGRATED PROJECT (PLANNING, DESIGNING & MANAGING)

Why INTEGRATE?• The bringing of people of different groups into unrestricted and equal association, as in society or an organization.

• 7 disciplines in single project (ARCH, BT, BS, CM, QS, PL and ID

• ‘broad‐based’ education


Recap….. Project 8‐ You have done site analysis holistically

‐ You are aware of community facility

‐ You are familiar with tourism activities

‐ You have done environmental analysis

‐ You have done spatial analysis

‐ You are aware of tourism‐related economic activities

‐ You have already identified the type of buildings (commercial, residential, institutional, leisure & recreational and reserved area)

‐ AND FINALLY YOU HAVE OPTED ONE MOST SUITABLE SITE TO LOCATE ‘’BATU FERINGGHI INFORMATION CENTRE” BASED ON THE 5 RECCOMENDED SITES


(5 recommended sites)


PROJECT 9: PLANNING, MANAGING & DESIGNING

Penang State Tourism Development & Culture has agreed to build a Information Centre at Batu Ferringhi that provides tourist information to the visitors who tour the place or area locally They agreed to appoint your company to come out with Development Proposal of ‘’Batu Ferringhi Information Centre” They necessitate the following outputs from you:1. Detail site analysis presentation drawing.2. Design proposal of ’Batu Ferringhi Information Centre’3. A Report of Development Proposal (Cadangan Pembangunan)4. A conceptual model of the proposed design The construction of the Information Centre building should be completed within 12 calendar months.


PROJECT 9a:Design Proposal – Batu Ferringhi Information Centre

Based on the opted site, conduct a site analysis and gather all required information (refer Site Inventory & Analysis) You are required to propose a design of Batu Ferringhi Information Centre on the selected site Design MUST have a concept Design a single‐storey information centre with a floor area not exceeding 200 square meters (you are free to choose any dimension)


PROJECT 9a (cont.):Design Proposal – Batu Ferringhi Information Centre


You are required to obtain a ‘plot plan’ of the opted site by buying it (mention the number of the land lot) at the counter of JUPEM (Department of Survey and Mapping Malaysia), Penang):

Jabatan Ukur dan Pemetaan Pulau Pinang,Level 39, KOMTAR, 10000 Pulau Pinang

Tel: +04‐2611762Fax: +04‐2635884

Director: Ahmad Azman bin GhazaliEmail: [email protected]

Opening Hours:Monday‐Thursday : 7.45 am ‐ 12.30 pm; 2.00 pm ‐ 4.45 pm

Friday : 7.45 am ‐ 12.00pm; 2.45 pm ‐ 4.45 pm

You are necessary to provide a schematic design (conceptual sketches and bubble diagram) as a basis for design.


You must ensure that the design consists of only 3 basic spaces: lobby (reception, sales area & waiting area), exhibition space and toilet. (But students are ALLOWED to introduce other exterior spaces like patio, verandah, terrace etc. in the design).

The presentation board should consists of :Board 1‐ Key Plan, Location Plan and Analysed Site Plan (existing condition) (Scale 1:250)‐ Site Analysis Information



Board 2 & 3i) Schematic Design (Design Concept)‐ Conceptual Sketches & Bubble Diagram

ii) Presentation Drawings‐ Proposed Site Plan (with roof plan and landscape) (Scale1:250)‐ Floor Plan (Scale1:100)‐ Front Elevation, Rear Elevation, Side Elevations (Scale 1:100)‐ Perspective Drawings: 2 Exteriors and 2 Interiors‐ 1 interior section drawing (showing lobby & exhibition space) (Scale 1:100)


PROJECT 9a (cont.):Design Proposal – Batu Ferringhi Information Centre Board 4

i) Material Selection‐ structure, roof, roof structure, wall, ceiling, window, door, floor, sanitary, fencing etc

ii) Building ServicesOnly focus on these 2 elements:‐ fire prevention and control system (passive and active)‐ building security systems

All of these Project 9a requirements should be composed in 4 nos of A1 size presentation board

DESIGN FOR ALL 4 PRESENTATION BOARDS SHOULD BE HARMONIZED AND COORDINATED



HARMONIZED AND COORDINATED


HARMONIZED AND COORDINATED


NOT HARMONIZED AND NOT COORDINATED

WHAT IS CONCEPTUAL SKETCHES?

Vision in your mind What a project may look and feel like Translating the vision into a sketch that captures whatever aspects you may wish to highlight


SCHEMATIC DESIGN:Example of Conceptual Sketches 1Example of Conceptual Sketches 1


Example of Conceptual Sketches


Example of Conceptual Sketches


WHAT IS BUBBLE DIAGRAM?

Free flowing concepts to help you start getting ideas for your design Define spaces within the base plan Later on, these spaces will be further developed to include specific rooms, circulation, and designated spaces


BUBBLE DIAGRAM EXAMPLE 1:








PRESENTATION BOARD EXAMPLE 1:


PRESENTATION BOARD EXAMPLE 2 : INTERIOR


PRESENTATION BOARD EXAMPLE 3:


PROJECT 9B:Development Proposal (Cadangan Pembangunan) Students are required to prepare a report of Development

Proposal (Cadangan Pembangunan) of the Batu Ferringhi Information Centre

The proposal should consist the following elements:1. Purpose, goal and objective (ALL)2. Background study and site analysis (PL)3. Proposed design development (ARCH, ID)4. Construction Method, Material Selection & Building Services

(BS,BT)5. Elemental cost analysis (QS)6. Project Scheduling (CM)


PROJECT 9B:Development Proposal (Cadangan Pembangunan)

1. Purpose, goal and objective (ALL)Purpose Development Proposal of Batu Ferringhi Information Centre at Batu

Ferringhi Site xx (mention which site you have chosen).Goals and objectives1. To carry out site analysis for Site xx2. To propose a design of single storey information centre with floor

area not exceeding 200 square metres3. To recommend building specification, material selection and

construction method for the proposed design4. To provide elemental cost analysis for the proposed design5. To prepare project scheduling of the proposed design


2. Background Study and Site AnalysisYou must provide: Key Plan, Location Plan and Site Plan Suitability of site / Potential of site Site Inventory and Analysis ‐ Site location, land use and

context, Topography, Hydrology and Drainage, Soil, Microclimate, Vegetation, Existing Structures, Utilities, Site Functions, Problems on site

PROJECT 9B (cont.):Development Proposal (Cadangan Pembangunan)


3. Proposed Design DevelopmentYou must provide: Schematic Design (Conceptual Sketches and Bubble Diagram) Presentation Drawings (Proposed Site Plan, Floor Plan, Front

Elevation, Rear Elevation, Side Elevations Perspective drawings & Interior Section Design

* Students are encouraged to just reduce the A1 size presentation drawing board to A3 size presentation drawing paper and attached it as Appendix in the report.



4. Construction Method, Material Selection & Building Services

You must provide: Construction method ‐> Conventional? IBS? Mixed? Propose

the superstructure and substructure. Material selection for ‐> structure, roof, roof structure, wall,

ceiling, window, door, floor, sanitary, fencing Building Services ‐> only focus on fire prevention & control

systems and building security systems



5. Elemental Cost Analysis (ECA) ECA – a systematic breakdown of the cost of building

according to key elements Key elements – substructure, superstructure, finishes, fittings

& furniture, services, external work Specification in the ECA describes the type and quality of

materials to be used in the projects You must provide:‐ An ECA and Specification for your project



6. Project Management & Scheduling Knowing how much time a team has to complete a project makes it

easier for the project manager to allocate tasks and get things done. Therefore, many project managers rely on project schedules to set

timeframe parameters for projects.

You must provide:1. Role of group members2. Organization chart of your group 3. Gantt Chart (reporting on actual project ‐ excel) which is based on ECA.

Submission requirement for Project 9B: One complete typed report (printed in A4 format; font Arial 11; 1.5 spacing) : 25‐35 pages



GANTT CHART EXAMPLE 1:


PROJECT 9C: CONCEPTUAL MODEL

Based on the design and dimensions of your Information Centre (Project 9a), build its CONCEPTUAL MODEL in 1:50 scale.

Submission requirement: MODEL BASE: A1 Size Hardboard or PlywoodMATERIAL: anything suitable COLOUR: monochrome

SUBMISSION ON 7.12.2012


Documents

Project 9 - Integrated - Universiti Sains Malaysia · PROJECT 9 ‐INTEGRATED PROJECT (PLANNING, DESIGNING & MANAGING) (5 recommended sites) PROJECT 9 ‐INTEGRATED PROJECT (PLANNING