Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
Programmable Logic Control
Technology
When is plcTECH required ?
When there is more than 200 addresses this is the most cost
effective way to control lighting
What other technologies are compatible with plcTECH ?
A PLC can be integrated with Dali as well as Push Dim
Programmable Logic Control Technology | AMG KZN
The PLC is most cost effective control method, operating at 24Vdc and the signals sent from
the PLC is also 24Vdc. We used 24Vdc LED boards in order to use the PLC signals to provide
light.
Each linear is broken up into boards that are 100mm sections.
• Each board receives its own signal cable back to the control panel.
• This is done to individually control each 100mm section.
The PLC is fully adjustable. The client can decide on:
1. The pattern
2. The speed
3. The direction
4. The timeframe
5. Programming/re-programming a new sequence.
How each 100mm board is wired
The PLC is then programmed to give each board a signal at a specific time,
instruct the direction of the motion and the speed of the pattern.
Signal Cable
100mm LED Board
Signal Cable
Programmable Logic Control Technology | AMG KZN