Program PAL using BPby Svilen Piralkov

Running BP Win Open BPWin from

the Deskop When Registration

prompt appears click “NO”

Main Window Click “Device” to

select the PAL to be used

Select Device Choose “Lattice

GAL22V10/B/BQ/C/D” and click “Select”

Verify that the Device selected is the same as the chip used.

Main Window Once the device is

selected click “Data Pattern” to load the JED file

Data Pattern Make sure

“Hexadecimal” is selected

Click “Open”

Load File Click “Browse…” to

choose the JED file to load it to the PAL

Select a File Select the file and

click Open

Load File Click OK

Data Pattern Click OK

Main Window Verify that the

“Device” and “Data Pattern” are the ones desired

Check the following boxes:

Continuity Erase Program Verify & Test

Twice Secure & Test

Twice Click “PROGRAM”

Program PAL Click “Ok”

Fuse Warning If this window

appears click “Ignore”

After programming the device the software should return back to the main window

PAL Programmed No errors should

appear and “Function Complete” should be displayed at the bottom.