Program Mpes

PROGRAM MINE PLANNING & EQUIPMENT SELECTION

PROGRAM

WEDNESDAY OCTOBER 12, 2011 BALLROOM

9:00-9:45 OFFICIAL OPENING

Opening speech: Welcoming address: Welcome: Welcome: - Welcome:

Zharmenov Abdurassul Aldashevich, General Director of RSE «NC CPMRM RK» Isekeshev Aset Orentayevich, Deputy Prime Minister - Minister of Industry and new tehnologies of the Republic of Kazakhstan Zhumagulov Bakytzhan Tursynovich – Minister of Education and Science of the Republic of Kazakhstan Esimov Akhmetzhan Smagulovich, Akim of Almaty city Raj K. Singhal, International chair

9:45-11:00 PLENARY SESSION – I Chair: Acad. Abdurassul Zharmenov (Kazakhstan)

Environmental Challenges of the Canadian Mineral Industry for the 21st century

Kostas Fytas (Canada)

Social Responsive Firm in the Mining Industry Jaroslav Tourek (Czech Republic) Coal deposits of Kazakhstan. A brief overview of the current state Nikolay Buktukov (Kazakhstan)

Some peculiarities of mining operations planning during development of high gas containing seams and seams prone to outbursts at Karaganda coal-basin mines Sergazy Baimukhametov, D. Mukhamedzhanov, A. Polchin (Kazakhstan) 11:00-11:30 Coffee Break


11:30-13:00 PLENARY SESSION – II Chair: Eleonora Widzyk-Capehart (Australia)

Strategic research initiative for the Swedish mining sector Uday Kumar (Sweden)

General Overview of Underground Mine Planning and Optimization Erkan Topal (Australia)

Takezhanov S.T. role and meaning in development of Kazakhstan’s metallurgy, education and training of personnel A. Zharmenov, Marat Radzhybayev (Kazakhstan)

From mineral to metallurgy - integrated concept for sustainable mining Carsten Drebenstedt (Germany) 13:00-14:30 Lunch

WEDNESDAY OCTOBER 12, 2011 ROOM # 1

14:30-16:00 Session 1 – Design and Planning of Surface and

Underground Mines Chairs: Prof. Monika Hardygora (Poland) Prof. Nikolay Buktukov (Kazakhstan)

Development of integrated system of planning and control of open cast D. Bukeikhanov, Batyrkhan Bekmurzayev, V. Syedin (Kazakhstan)

Study of Ultimate Pit Design at Tapunopaka Nickel Mine PT ANTAM (Persero) Tbk Febri Esitadi Prihasto, Y. Susanto, A. Arifien, Sugiyo, A. Yulianto (Indonesia)

Application of Punch Mining System to Indonesian Coal Mining Industry Akihiro Hamanaka, T. Sasaoka, H. Shimada, K. Matsui, H. Takamoto (Japan)

Optimum cut-off grade in open pit mines with considering post-mining land-use revenues S. Narrei, Morteza Osanloo (Iran) 16:00-16:30 Coffee Break


16:30-18:00 Session 4 – Design and planning of Surface and Underground Mines Chairs: Prof. Vladimir Konyukh (Russia) Mr. Febri Esitadi Prihasto (Indonesia)

Impact of Shifting on Selling Cost and Mining Cost Adjustment Factor (MCAF) against to Pit Optimization of North Tayan Mine, PT ANTAM (Persero) Tbk Tafia Prasojo, A. Hindarto, B. Parinussa, A. Arifien, A. Yulianto (Indonesia)

Assignment of the most effective inter-related natural and operational parameters interacting the integrated mining and treatment optimization Ayman Ahmed, C. Drebenstedt (Germany)

Determination of optimal aggregate blending policy with linear programming in a quarry Denyz Adiguzel, A. Bascetin, M. Yilmaz, A. Tugrul, S. Tuylu (Turkey)

Exploration and Industrial Development of Large Deposits of Low-titanous Titanium-magnetic Iron Ores in Kazakhstan A. Yedilbayev, V. Zyabkin, L. Kubeyeva, V. Yugay, Vera Muzgina (Kazakhstan)

Mining operations planning of with using opportunities of three-dimensional simulation of modern geoinformation systems Aleksandr Ananin, V. Prokhodov, V. Muzgina (Kazakhstan)

19:00-21:00 Welcome Reception


14:30-16:00 Session 2 – Information Technologies in Mine

Engineering and Management

Chairs: Dr. Fiona Mavroudis (Germany) Dr. Assiya Boyandinova (Kazakhstan)

Study on Safety and Recovery Rate of Coal Mining Industry in China Donghua Zhang, T. Sasaoka, H. Shimada, K. Matsui (Japan)

Use of Radio Frequency Identification for Mine Planning Vladimir Konyukh (Russia)

Information approach for creation of automated robotized control system by underground mining of hard ores Galina Streltsova (Russia)


The Automated Management System of Ore-Flow inside Open-pit’s Space Zhanna Adilkhanova, A. Boyandinova, K. Zhusupov (Kazakhstan)

Improving the quality of ores extracting based on the technology information about their processing M. Turdakhunov, S. Krotov, M. Zarubin, Mikhail Yuschenko (Kazakhstan)

Next Generation Digital Beam Forming (DBF) Radar for Positioning and In-Pit Crushing and Conveying (IPCC) Systems K. Nienhaus, Jan Berg, M. Hahn, R. Winkel (Germany) 16:00-16:30 Coffee Break

16:30-18:00 Session 5 – Information Technologies in Mine Engineering and Management

Chairs: Prof. Bayan Rakishev (Kazakhstan) Dr. Cuthbert Musingwini (South Africa)

Preparing and processing of original data when geomechanical simulating M. Zhuravkov, Sergey Khvesenya (Belarus)

Method of parameters of technological flows determination when technical re-equipping K. Anistratov, Alexey Zhylin (Russia)

The automated corporate management system of geotechnological complex on surface mining S. Galiyev, Assiya Boyandinova, Zh. Adilkhanova (Kazakhstan)

Increasing of reliability of representation of pattern of ores processing, arriving from different mines S. Petrovich (Russia), M. Faizulin, Natalia Stukalova, R. Smailova (Kazakhstan) Increasing efficiency of evaluation of mining-and-processing complex operation S. Petrovich (Russia), Mazhit Faizulin, N. Stukalova, R. Smailova (Kazakhstan)

Quick evaluation of cutting sequences for shearer longwalls K. Nienhaus, Stefan Hetzel (Germany) 19:00-21:00 Welcome Reception



14:30-16:00 Session 3 – Non-ferrous metallurgy of Kazakhstan –

history and modern condition. Dedicated to memory of S.T. Takezhanov

Chair: Prof. Marat Bitimbayev (Kazakhstan)

80 years to Sauk Temirbayevich Takezhanov Larisa Nikitina (Kazakhstan)

Domestic technologies for complex mineral raw materials Klara Kuanysheva (Kazakhstan)

The peace is in his dreams Marat Bitimbayev (Kazakhstan)

Engineer and scientist Ginayat Bekzhanov (Kazakhstan)

Sauk Temirbayevich Takezhanov and non-ferrous metallurgy of Kazakhstan Sultanbek Kozhakhmetov (Kazakhstan)

Memories about Sauk Temirbayevich Takezhanov Alexandr Danilenko (Kazakhstan)

Prediction of the degree of concomitant components extraction by processing of polymetallic ores Bayan Rakishev, Z. Rakisheva (Kazakhstan) 16:00-16:30 Coffee Break

16:30-18:00 Session 6 – Innovative technologies in Mining and Metallurgy Complex of Kazakhstan. Dedicated to memory of S.T. Takezhanov

Chairs: Prof. Alexandr Klets (Kazakhstan) Dr. Alexandr Ananin (Kazakhstan)

Possibility of chromous-bearing concentrates receiving from technogenic mineral raw materials of Kazakhstan Abdulkhay Niyazov, E. Li, A. Kosmukhambetov, A. Klets (Kazakhstan)


Decreasing of negative influence on environment when developing technology of hydrometallurgical processing of copper concentrates with processes of electric-membrane oxy-hydrochlorination using as an example of Maikain preparation plant Alexandr Kosmukhambetov, Z. Kadenich, E. Smolin, T. Valishevskaya, S. Omarova (Kazakhstan)

Outlook of innovation technologies and problems of waste management in mining-and-metallurgical complex Alexandr Klets, E. Baimakova, N. Storozhenko (Kazakhstan)

Outlook of mining machinery manufacturing development in Kazakhstan E. Abdrakhmanov, R. Zhakatayeva, Askarbek Koketayev (Kazakhstan)

Perspectives of Kazakhstan’s complex potassium deposits development A. Ananin, Viktor Naumov, A. Zemskov, T. Kasenov, Yu. Rogov (Russia, Kazakhstan)

Choice of complex alloys plant location for construction and scheme of its supply with mineral raw materials in the Kyrgyz Republic A. Zharmenov, Uzakbay Dzharlkaganov, M. Aisautov (Kazakhstan)

Development and adoption of innovative waste processing at chrysotile asbestos manufacture to produce marketable magnesium products A. Zharmenov, S. Akishev, Gennadiy Romanov, S.Telbayev, N. Klochkov, A. Homyakov, A. Smagulov (Kazakhstan)

19:00-21:00 Welcome Reception

THURSDAY OCTOBER 13, 2011 ROOM # 1


Underground Mines

Chairs: Prof. Dias Bukeikhanov (Kazakhstan) Dr. Bekir Gens (South Africa)

Study on an extraction technology for residual coal around end-slopes Yanlong Chen, T. Sasaoka, H. Shimada, K. Matsui (Japan)

Technological decisions acceptance by math-logic simulating methods in difficult situations Uzakbay Dzharlkaganov (Kazakhstan)


Intelligent man-machine dialogue for optimization of mining work development and equipment fleet for deep quarries D. Pastikhin, Andrey Valuev (Russia)

Performance Evaluation of Drilling Operations in Indian Granite Quarries S.S. Rathore, S. C. Jain (India)

The secondary usage of the burnt oil-shale ashes of Narva Power Plants Alexandr Pototski, J.-R. Pastarus (Estonia) 10:30-11:00 Coffee Break

11:00-12:30 Session 9 – Design and Planning of Surface and Underground Mines Chairs: Prof. Marina Rylnikova (Russia) Dr. Marie Vrbova (Czech Republic)

Sustainability Assessment Methods for Development of Oil Shale Deposits Sergei Sabanov (United Kingdom)

Construction of Subsurface Barriers for Controlling Contaminated Ground Water Flow at Mine Disposal Sites Using Chain Conveyor Cutter (CCC) Shizuo Ikuta, K. Matsui, H. Shimada, T. Sasaoka (Japan)

GNSS technology for automation of surface mining Dana Sládková, R. Kapica, M. Vrubel (Czech Republic)

Conceptual model of open pit field contour choice and its production capacity Dias Bukeikhanov, M. Turdakhunov, V. Syedin (Kazakhstan)

12:30-14:00 Lunch

14:00-15:30 Session 11 – Design and Planning of Surface and Underground Mines

Chairs: Dr. Steven Rupprecht (South Africa) Mr. Ladislav Hanuska (Czech Republic)

Innovative geodetic methods for a monitoring of the raw material industry Wilhelm Stelling (Germany)


Improvement of Underground Transportation Systems at Ikeshima Colliery in Japan H. Takamoto, T. Matsuda, Takashi Sasaoka, H. Shimada, K. Matsui (Japan)

Study on Application of Multi-slice Longwall Mining System for Extra-Thick Coal Seams under Weak Geological Condition N. Z. Lin, Takashi Sasaoka, H. Shimada, K. Matsui (Japan)

Combined system of deposit Ushkatyn-3 mining with quality control Arun Zhanbatyrov, A. Koketayev (Kazakhstan)

Underground water challenge for development south rampdown L.450 ciurug mine design A. Sudharto, Dedy Samsudin, H. Dharma (Indonesia) 15:30-16:00 Coffee Break

16:00-17:30 Session 13 – Design and Planning of Surface and Underground Mines Chairs: Prof. Bekmurzayev Batyrkhan (Kazakhstan) Dr. Galina Streltsova (Russia)

Some factors controlling cemented rockfill failure in longhole mining Muhammad Zaka Emad, H. Mitri, J. Henning (Canada)

Shaft Versus Decline – A Southern Africa Perspective and Update Steven Rupprecht (South Africa)

Short-term production scheduling for an underground room-and-pillar mine E. Clausen, Oliver Langefeld (Germany)

Combined geo-technology is a way to increase of fullness and complex using of mineral resources Мarina Rylnikova (Russia)

Problem of optimization in mining Sarmantay Rakhimbekov (Kazakhstan) 19:30 Symposium Banquet


THURSDAY OCTOBER 13, 2011 ROOM # 2

9:00-10:30 Session 8 – Mining Equipment Selection and Mining

Automation

Chairs: Prof. Morteza Osanloo (Iran) Dr. Hideki Shimada (Japan)

The Environmentally Innovations and Development Occur on Aquatic Mining Equipment and Techniques Ehab Gomaa, C. Drebenstedt (Germany)

Investigation of the Relations Between the Cerchar Abrasivity Index and Percentage of the Abrasive Minerals for Volcanic Rocks R. Çomaklı, Niyazi Bilim, S. Kahraman, A. E. Dursun, B. Kekeç (Turkey) Investigation of effects of size and capacity of mine equipment on production using ProModel simulation models Nick Vayenas, S. Peng (Canada) Time Series Analysis of Overburden Removal Trucks in Tunçbilek Surface Mines E. Kepekci, Hürriyet Akdaş (Turkey)

Effect of the belt’s properties on the power demand for conveyor drives Miroslaw Bajda, M. Hardygora (Poland)

The future of mining: CSIRO technologies towards efficient operations Eleonora Widzyk-Capehart (Australia)

New method for interpretation of the spectrograms of responses to external influences N. Buktukov, Galina Metaxa, G. Moldabayeva (Kazakhstan)

10:30-11:00 Coffee Break

11:00-12:30 Session 10 – Mining Equipment Selection and Mining Automation

Chair: Prof. Vera Muzgina (Kazakhstan)

Correlation of rock brittleness and specific energy obtained from linear rock cutting tests Arif Emre Dursun, N. Bilim, R. Çomaklı, M. Kemal Gökay (Turkey)


Investigation of the Effects on Pick Wear of Abrasion Resistance and Abrasiveness Properties of Rocks Niyazi Bilim, A. E. Dursun, R. Çomaklı (Turkey)

Comprehensive studies on the multi-criteria effectiveness of large belt conveyor transportation systems M. Hardygora, W. Kawalec, R. Blazej, Radoslaw Zimroz (Poland)

Rock characterization and wire performances for dimension stone cutting by diamond wire saw M. Cardu, Alessandro Giraudi, V.M.S.R. Murthy, B.S. Choudhary, A. Shukla (Italy, India)

Underground Mine Contractor Selection to Achieve Mine Development Advances at Pongkor Gold Mine Muhidin ST (Indonesia)

Method of strength calculations of the main elements of belt conveyers for underground mines Saken Malybayev, N. Daniyarov, N. Malybayev, O. Balabayev (Kazakhstan)

Application of modern equipments and technologies in the construction of underground in Almaty Murat Ukshebayev (Kazakhstan) 12:30-14:00 Lunch

14:00-15:30 Session 12 – Mining Equipment Selection and Mining Automation

Chair: Dr. B.P. Singh (India)

Successes and failures of mine mechanisation trials on platinum mines of the Bushveld Complex in South Africa S. Nong, Cuthbert Musingwini (South Africa) Evaluation of effective using of synchronous electric drive of axial fans for the main ventilation of mines Yuriy Kozlov (Russia)

Electromagnetic rock breaker for non-explosive rocks breaking Erik Yedygenov, V. Lyashkov (Kazakhstan)

TPM framework for underground mobile mining equipment; A case study A. Gustafson, Håkan Schunnesson, D. Galar, R. Mkemai (Sweden)


The Sensor-Based Sorter – A Mining Machine Christopher Kleine, F. Mavroudis, M. Robben, H. Wotruba (Germany)

Innovative, highly effective, environmentally friendly technologies management quality ore in the mining and metallurgical complex Yuriy Fedorov, V. Cherkashin (Russia)

Intelligent Sensing Technologies for Mining Applications K. Nienhaus, Fiona Mavroudis, M. Gaastra (Germany)


16:00-17:30 Session 14 – Drilling, Blasting and Excavation Operations

Chairs: Dr. S.S. Rathore (India) Prof. Håkan Schunnesson (Sweden)

Methods improving of rocks explosive breaking on the basis of phenomen of detonation optics Tasbulat Igbayev, M. Zharaspayev, B. Sukurov (Kazakhstan)

Effect of charge diameter on the VOD of bulk emulsion explosive Manoj Pradhan (India) Rotary drilling speed prediction by linear and nonlinear regression analysis Fraidoun Tavakoli Shirazi, M. Osanloo (Iran)

Study on Blast Vibration and Size of Fragmentation at Limestone Quarry Takashi Sasaoka, H. Shimada, A. Hamanaka, K. Matsui (Japan)

Perforator with electromagnetic drive for the drilling of hard rocks Gennadiy Korablev, E. Yedygenov, N. Neborokova (Kazakhstan)

Drill Monitoring for Ground Characterization in Tunnelling Operations Håkan Schunnesson, R. Elsrud, P. Rai (Sweden, India) 19:30 Symposium Banquet


FRIDAY OCTOBER 14, 2011 ROOM # 1


Underground Mines

Chairs: Prof. Andrey Valuev (Russia) Dr. Mazhit Faizulin (Kazakhstan)

Production reliability modelling for an open pit mine Enrique Rubio (Chile)

Mine-wide modeling of mining-induced stresses - a case study using FLAC3D Shahe Shnorhokian, H. Mitri, D. Thibodeau (Canada)

The Role of Logistic in Underground Mine Design Steven Rupprecht (South Africa)

Development of modular backfill complexes as new direction of comprehensive using of ore deposits D. Kaplunov, Dmitriy Radchenko (Russia)


11:00-12:30 Session 17 – Geomechanics, Rock Mass Shift Management

Chair: Prof. Witold Pytel (Poland)

Problem of interchamber pillars when inclined deposits mining Yu. Chabdarova, K. Nugmanov, Lyazzat Shamganova, S. Dzhapayev (Kazakhstan)

Progressive technologies creating of advanced cable-injection hardening of mass of interseam “bridges” when underground mining of development overlapping and convergence ore deposits Dosanbay Bekbergenov, B. Bassibekov, T. Akhanov (Kazakhstan)

A self-focusing effect dealing when measuring electrical resistance Yeldos Bolenov, G. Metaxa (Kazakhstan)

Strength of stratified rock mass beneath hard rock pillars Witold Pytel, B. Pałac-Walko (Poland)


Computer simulating of conjugated hydrogeomechanical processes in rock mass with large tectonic disturbances M. Zhuravkov, O. Konovalov, Andrey Krupoderov, S. Bogdan (Belarus)

Preparation and causes of major caving-in at Annenskiy Mine (Kazakhstan) Vladimir Mansurov, V. German (Kazakhstan)

Prediction of the Surface Subsidence in the Jiu Valley Coal Basin Ilie Onica, E. Cozma, D. Marian (Romania) 12:30-14:00 Lunch

14:00-15:30 Session 19 – Economic Research and Feasibility Studies, Reserve Estimation

Chairs: Dr. Gento Mogi (Japan) Mr. V.S. Rao (India)

Ways of problem solving of industrial-innovation development of Kazakhstan’s mining-and-metallurgical complex S. Galiyev, Alexandr Lissenkov, S. Zhumabekova (Kazakhstan)

Iron ore mineralisations in Argentina Julio Avila (Argentina)

Metals for energy; what kind of and how much rare metals do we need for future energy? Gento Mogi, M. Kano, B. Behgol (Japan)

Non-conventional cost methods in engineering decision-making in equipment selection process Dina Kayrbekova, T. Markeset (Norway)

Economics of exhaust air heat recovery systems for mine ventilation H. D. Sbarba, Kostas Fytas, J. Paraszczak (Canada)

Ore reserve management Bertie Meyer (South Africa)

"Productivity-2020" program as the instrument of modernization of mining-and-metallurgical complex of Kazakhstan M. Kazhyken, Seitgali Galiyev, S. Zhumabekova



FRIDAY OCTOBER 14, 2011 ROOM # 2

9:00-10:30 Session 16 – Ecological Aspects of Mining Engineering

and Mineral Processing

Chairs: Prof. Kostas Fytas (Canada) Prof. Svetlana Yefremova (Kazakhstan)

The long-term changes of landscape functions in the selected brown coal mining and post mining areas in the northwest of the Czech Republic Jan Prochazka, J. Brom, V. Nedbal, E. Pecharova (Czech Republic)

Classification of the ecological vulnerability of post-mining landscape areas and the feasibility of development concepts and projects Miroslav Martiš, E. Pecharová, S. Mittelbachová (Czech Republic)

Study on the Characteristics and Mechanism of Rock and Water Contamination at Maamba Collieries Koh Hiroto, G. J. Kusuma, H. Shimada, T. Sasaoka, K. Matsui (Japan)

On the phenomenon of pulsating gas supply of flotation producing gas from their aqueous solution Yuriy Yeremin, A. Zharmenov, S. Hairullina, N. Chakirtova, N. Denisova, A. Sarsenbay, N. Abdimanapov (Kazakhstan)

Combined transport in deep open-cast mines S. Doronenko, Dauletkhan Beiseitov (Kazakhstan)

Innovative solution to the problem of rice husk disposal to produce multifunctional use materials A. Zharmenov, Svetlana Yefremova, Yu. Sukharnikov, L. Bunchuk (Kazakhstan)


11:00-12:30 Session 18 – Mining: Health and Safety

Chair: Prof. Miroslav Martis (Czech republic)

Towards Benchmarking of Safety Performance in the ICMM Bekir Genc, M. Hermanus (South Africa)

Practice of Coalbed Methane Drainage by Drilling Multilateral Horizontal Well in Coal Mine Liu Sheng-gui, Hao Nai,Li Hui-Fang (China)


The Effects of Extreme Events on Attitudes to Occupational Health and Safety Noune Melkoumian, P. Milnes, D. Mather (Australia)

Identifying and Clearing Cultural Blockages to Occupational Health and Safety Peter Milnes, N. Melkoumian, D. Mather (Australia)

Effect of the condenser design on the performance of an air- cooling machine Prakash Dhekne (India)

Numerical Analysis on Shaft Lining Rupture in Alluvium during Aquifer Drainage and Solution Method Qing Yu, T. Sasaoka, H. Shimada, Sh. Ikuta, K. Matsui (Japan)

Creating a culture of safety by introducing a student mine rescue team at the University of British Columbia Rory Grunerud, A. Thomson (Canada) 12:30-14:00 Lunch

14:00-15:30 Session 20 – Efficient Reclamation, Mine Closure and Mining Waste Disposal Methods

Chairs: Prof. Ilie Onica (Romania) Prof. Erik Yedygenov (Kazakhstan)

Laboratory Evaluation of Multi-Layer Cover to Control Acid Mine Drainage in the Coal Mine Waste Rock Dump Hideki Shimada, G.J. Kusuma, K. Hiroto, T. Sasaoka, A. Hamanaka, H. Takamoto, S. Fujita, K. Matsui (Japan)

Practical application of the European Landscape Convention in Post-mining Areas on the Local Level of the Czech Republic Petra Kottová, M. Martiš, E. Pecharová (Czech Republic)

Directions of rock dumps of closing coal mines effective using V. Kharchenko, Ivan Petrov, I. Stoyanova (Russia)

A new approach to the cleanup and restoration of land after mining M. Vrbova, Josef Hejsek (Czech Republic)

Physical and Geochemical Characterization of Coal Waste Rock Dump Related to Acid Mine Drainage Generation Potential G.J. Kusuma, H. Shimada, T. Sasaoka, R.S. Gautama, K. Matsui, M.C. Nugraha, B. Sulistianto, K. Hiroto (Japan)


Ecological-economic evaluation of effect of Ural region coal mines and open-casts closing. Alexandr Semyachkov (Russia)


POSTER PAPERS Analytical method of coal seam's tectonic breaking disturbances forecasting on exploration works data R. Khodzhayev, R. Gabaidullin, S. Asainov, I. Filatov, L. Vlasova, F. Gafarova (Kazakhstan)

A study on Slope Maintenance and Efficient Blasting for Best Development of Korean Small-sized Open-pit Mines Y. H. Ko, H. S. Yang, W. B. Kim, H. D. Jang, S. J. Kim , H. S. Moon (Korea)

Analysis of the landscape functionality change as a basis for restoration of landscape affected by surface mining J. Skaloš, I. Trpáková, P. Trpák, E. Pecharová, T. Sedmidubský (Czech Republic)

Cyclic-flow technology development when rock mass transportation from deep open casts D. Beiseitov, S. Doronenko (Kazakhstan)

Algorithmization of width determination of broken rock mass spreading at a stage of pre-design deposits estimation S. Doronenko, D. Beiseitov (Kazakhstan)

New methods of computational geometry and their use for interactive design of surface mining A. Valuev, K. Minnakhmetov (Russia)

Methods and facilities for starting-up of in parallel installed ventilators, exploited at mines О. Коltsova (Kazakhstan)

Innovation VNIItsvetmet’s explosive technologies of for mining enterprises A. Bakhtin (Kazakhstan)

Industrial ecological control in Kazakhstan М. Bogatyrev, А. Bogatyrev (Kazakhstan)


Steeply inclined conveyor train for open mining operations E. Yedygenov, O. Tkachenko, M. Panfyorov (Kazakhstan)

Simulation and choice of direction of mine operations development, conditions and scheduling at deep open casts B. Bekmurzayev, V. Syedin, M. Turdakhunov (Kazakhstan) Designing of chamber-and-pillar system with blasting haulage of ores from flatly inclined sublevel chambers D. Bekbergenov, B. Bassibekov, A. Volkov, T. Akhanov (Kazakhstan)

Planning of mining-transport operations at open cast by criterion of plans profitability and reliability U. Dzharlkaganov, B. Bekmurzayev (Kazakhstan)

Practice of designing and development of cyclic-flow technologies and their rational parameters choice M. Turdakhunov, D. Bukeikhanov, V. Syedin, Y. Sapakov (Kazakhstan)

Laboratory studying of old self-disintegrating slag of refined ferrochromium production of Aktyubinsk ferroalloys plant using for filling operations at Pervomaiskiy deposit V. Gamulka, E. Kovtun, V. Sergeyev, D. Gamulka, M. Aimbetov, M. Ausabayev, А.Saginbayev (Kazakhstan)

Use of the isotope data at studying and to estimation of ore deposits S. Myrzaliyeva, A. Zharmenov, A. Dauletbay (Kazakhstan)

ABSENT PARTICIPATION Features of mining operations supplying of explosives in countries with large territories and hard climatic conditions A. Starshinov (Russia), Zh. Zhamyan (Mongolia)

New approach to forecast of dangerous geomechanical and hydrogeological processes when mineral resources opening K. Trubetskoy, N. Miletenko, V. Odintsev (Russia)

Forecast of dangerous hydro geological processes when underground mining of solid useful minerals I. Miletenko, L. Zenkovich, N. Rulkov (Russia)

Geomechanical evaluation of hydro geological conditions changing of overlying rocks when boreholes hydraulic mining of iron ores N. Miletenko, V. Odintsev (Russia)


Complex formation in extraction zinc-containing system when mineral raw materials processing A. Baikonurova, A. Reznik, V. Bukin, A. Smirnova, G. Usoltseva (Russia, Kazakhstan)

Complex of measures on prevention of gas-dynamic occurrences when coal-gas deposits developing by means of active impact V. Zberovski (Ukraine)

Mining-geometrical monitoring of reserves’ reliability is the basis of leading geologic analysis of mineral resources studying T. Rogova (Russia)

Mining of coal with increased content of natural radionuclides G. Sidorova (Russia)

Problem of informational evaluation of indexes of georesource objects development А. Kurmankozhayev, Dz. Bastaubayeva, S. Zhusupbekov (Kazakhstan)

Informational technologies using for evaluation of large-scale explosions influence on pit walls stability of high-mountainous open casts K. Kozhogulov, S. Usmanov (Kyrgyzstan)

The approach to stability problems of underground mine roof with macro-cracks M. Zhuravkov, N. Chumak (Belarus) Ecological aspects of utilization of liquid industrial waste of mining and oil extracting enterprises E. Omirzakova (Kazakhstan)

Processing of asbestos production waste O. Baigenzhenov, V. Kozlov, R. Shayakhmetova, V. Luganov, G. Maldybayev (Kazakhstan) Method of mass data preparing of random variables of complex object of control M. Adambayev (Kazakhstan)

Forming of uniform mining-technical policy for increase of mineral raw materials complex of Kazakhstan D. Aitzhanova (Kazakhstan)

The main directions of decreasing of environment pollution in mining-industrial regions of Kazakhstan R. Kondaurov (Kazakhstan)


Improving of re-vegetation techniques in Kazakhstan S. Rakhimbekov, O. Tursunov (Kazakhstan)

Method of mine geometry for evaluation of separate block categories reserves on decorative stone deposits and its application in the field “Syuskyuyansaari” E. Nagachevskaya (Russia)

Principles of evaluation and ways to reduce aero-technogenic impact of internal and external sources of dust emission on working areas of open casts and environment when open mining of useful minerals deposits. V. Kuznetsov, S. Kovshov (Russia)

Optimization of placement of the working zone at the inclined coal deposits B. Rakishev, S. Moldabayev (Kazakhstan)

Expediency of zone-by-zone using of dump tracks of different capacity B. Rakishev, G. Samenov, A. Kuttybayev (Kazakhstan)

Modern management tools in mining industry in the era of uncertainty D. Damigos, M. Menegaki (Greece)

Sampling density optimization for a nickelferous deposit in Greece K. Modis, M. Menegaki (Greece)

Design of an underground bauxite exploitation in Greece A. Benardos, D. Katopodis (Greece)

Innovative combined stemming device for downward blast holes for the several using К. Tulebayev, N. Kenzhegaliyev (Kazakhstan)

Estimation of influence of an inclination of the bottom basis and height of stage of Internal dump on its stability and Stability of weighted it of a non-working board of an open-cast mine N. Abdibekov, N. Kenzhegaliyev, К. Tulebayev (Kazakhstan)

To research conditions and regimes of reduce smelting process for treatment of lead cakes A. Zharmenov, A. Sydykov, F. Berdiculova

Documents

Program Mpes