Profile aluminiu

8/12/2019 Profile aluminiu

1/8

CRYSTAL

Profiled SolutionsEPS

KT+Frames with theprofile KT+

Simplicity Continual tension Simple assembly SafetyNo ready-made goods No clamps No special tools Tearproof upNo eyelets No clips No heavy profile to 1.360 Kg/mNo ropes No screw-systemNo hems No strings


2/8

EPS. CRYSTAL

12 EPS. CRYSTAL www.eps-solutions.de

1 0 . 2

0 0 4

CUSTOMIZING PROFILES

Depending on the constructionrequired, saw off the profilestraight or in an angle of 45.

PUTTING THE FRAME TOGETHER

Reference to corner-construc-tion: Depending on the posi-tion of the profile KT+ (horizon-tal or vertical), you should useone or two corner angles or cor-ner reinforcements per corner.

Insert corner angles EQABS intoboth central cells of one of thetwo profiles.Then shove thetwo parts into each other.

Afterwards fix the corners withone or two corner reinforce-ments EQ KT+ with the T-NutCLM (two per bracket).

PLACEMENT OF A FRAME-SUPPORT

Only in specific cases - for inde-pendent and big dimensionedframes a frame-support maybe necessary. If that is the case,

one or two corner reinforce-ments EQ KT+ with T-Nuts CLMare fixed to every end.

KT+With the bearing profile KT+bigger and medium frames can

be produced.Covered on oneside or on both sides : KT+ ful-fills all your requirements withthe reliable simplicity of theCRYSTAL-system.The ideabehind it especially focuses onthe realization of wall-framesoutside.

Size: 64 x 36,5 mm

reshapeable in one axisminimum radius = 1000 mm


3/8

EPS. CRYSTAL

13www.eps-solutions.de EPS. CRYSTAL

1 0 . 2

0 0 4

CONSTRUCTION OF THE CORNERSWith the adjustable cornerreinforcement EQART KT+ youcan construct corners from 0up to 180.

JOINT

Two TU joiner tubes, fixed withself-tapping screws, make greatconstruction lengths possible.

FASTENING

With the multifunctionalbracket EQ KT+, installation onthe wall is possible.

KT+KT+ enables you to build diffe-rent two- or three-dimensionalframes and combine themwith each other. The only limitis your fantasy.

Example of a formedconstruction with KT+

Example of a hexagonal con-struction


4/8

EPS. CRYSTAL


1 0 . 2

0 0 4

Fastening on the wall with thebrackets EQ KT+ and the T-NutsCLM.

Screw joint directly throughthe profile KT+.

The conception of KT+ is espe-cially suitable for solutionswith wall-frames.You have twooptions:

The sort of screws and dowelsdepends on the kind of sub-soil. The person setting it

up takes full responsibility.

!


5/8

EPS. CRYSTAL


1 0 . 2

0 0 4

Example of a partition inclu-ding fabric with insulatingfoam core.

CLAMPING BAR IN FRONT

This is the classicfastening. Forthis the clam-ping bars needto be cut at an

angle of 45.This method per-mits a "framed" optical effect.

SURROUNDINGCLAMPING BAR

This kind of fastening the

clamping bar onto the sur-rounding exterior frame, per-mits an even more interestingpresentation.The bar is onlyhardly visible from the frontview.

DOUBLE-SIDED

In case of a dou-ble-sided framewith surroun-ding clamping

bars, it is possible to cover thealuminium-profile completelywith the fabric with the doubleprofile-nuts of KT+

The system KT+ offers you various possibilities fasteningthe clamping bar. It allows you to realise unique objects,e.g. the construction of a partition of a wall.


6/8

EPS. CRYSTAL


1 0 . 2

0 0 4

CLAMPING PROFILE SECTIONS

The profile-sections are rem-nant-pieces with a length of approximately 6 to 10 cm.

CHOICE OF CLAMPING BAR

For cases used inside, pleasechoose the medium clampingbar JN. For the outside choosethe strong clamping bar JR. Thestandard colour is white (diffe-rent colours available).

FASTENING OF THE CLAMPINGBAR

Clamp the fabric by first of allshoving the bar from the exte-rior edge to the inside.

Hit the clamping bar with theplastic hammer into the profilenut. Doing this you stretch thefabric.

CUSTOMIZINGOF THE FABRIC

The fabric needsto be approxi-

mately 10 cmwider than theframe on eachside.

ALIGNING THE FABRIC

Place the shortclamping profile

pieces on theupper side forpositioning andpretensioning.

Repeat this stepat the lower side

and at the sides. Nowgently pull the fabric.

TENSIONING THE

FABRIC

You fasten andtense the fabricwith the clam-ping bar. Kindlynote the positionof the profile-

sections.

Remove one profile-sectionafter the other.

CUTTING OFFTHE FABRIC

Once the fabricis tensed, thefabric is cut off along the clam-ping bar or in

one of the profile-nuts (for cases with fabric on

both sides).

The fastening and tensioning of the fabric form the con-clusion of the system.Please exactly follow the installa-tion instructions and only use the tools recommended.

Attention:To stretch the fabric, always use a non-rebound plastic hammer.

< JN

JR >

!


7/8

EPS. CRYSTAL


1 0 . 2

0 0 4

EQABSCorner angle

EQ KT+Corner reinforcement

EQART KT+Adjustable cornerreinforcement

TUJoiner tube

KT+Profile

JNClamping bar medium

JRClamping bar strong

CLMT-Nut

VisAFTR 3,5x13Screw

ECROU M6Hexnut

COMPONENTS AND PROFILES


8/8

EPS. CRYSTAL


OUR TECHNICAL HOTLINE WOULD BE PLEASED

TO HELP YOU WITH ANY QUESTIONS:

+49 (0) 271/4058143

Documents

Profile aluminiu