Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Professor Kathy Lu’s Group Publications and Invited Talks
Updated June 5, 2019
Books:
1. K. Lu, Nanoparticulate Materials-Synthesis, Characterization, and Processing, John Wiley
& Sons, Inc., Hoboken, New Jersey, ISBN: 978-1-1182-9142-9, 464 pages, October 2012.
2. K. Lu, Materials in Energy Conversion, Harvesting, and Storage, John Wiley & Sons, Inc.,
Hoboken, New Jersey, ISBN: 978-1-118-88910-7, 448 pages, September 2014.
Books Edited:
1. N. P. Bansal, J. P. Singh, A. Bhalla, M. M. Mahmoud, N. Jose Manjooran, G. Singh, K.
Lu, G. Brennecka, Processing and Properties of Advanced Ceramics and Composites VI,
Ceramic Transactions, Volume 249, ISBN: 978-1-118-99549-5, 375 pages, September
2014, Wiley.
2. K. Lu, N. J. Manjooran, R. Murakam, and G. Pickrell, Advances in Synthesis, Processing
and Applications of Nanostructures, Ceramic Transactions, Volume 238; ISBN: 978-1-
1182-7327-2, August 2012, Wiley.
3. K. Lu, N. Manjooran, M. Radovic, G. Pickrell, E. Medvedovski, E. A. Olevsky, C. Li, G.
Singh, and N. Chopra, Advances in Nanomaterials and Nanostructures, Ceramic
Transactions, Volume 229, ISBN: 978-1-118-06002-5, August 2011, Wiley.
4. K. Lu, C. Li, E. Medvedovski, E. A. Olevsky, Processing of Nanoparticle Materials and
Nanostructured Films, Ceramic Transactions, Volume 223, 2010, ISBN 978-0-470-92731-
1, Wiley.
5. T. Hinklin, K. Lu, Processing of Nanoparticle Structures and Composites: Ceramic
Transactions, Volume 208, ISBN: 978-0-470-40846-9, August 2009, Wiley.
Book Chapters:
1. K. Lu, W. Li, and B. Chen, “Sintering of Porous Materials,” Sintering: Mechanisms of
Convention Nanodensification and Field Assisted Processes, Editors: Ricardo H. R. Castro,
Klaus van Benthem, Springer, Engineering Materials 35, 2013, Volume 35, 115-
136, DOI: 10.1007/978-3-642-31009-6_6.
2. K. Lu, “Shaping of 3D Nanoceramics and Their Composites,” Handbook of Nanoceramics
and Their Based Devices, American Scientific Publishers, Edited by T.Y. Tseng and H. S.
Nalwa, vol. 2, p 151-177, ISBN:1-58883-116-7, Stevenson Ranch, CA, 2009.
3. K. Lu and X. Zhu, “Liquid Nanoparticles: Synthesis and Characterization,” Encyclopedia
of Nanoscience and Nanotechnology, American Scientific Publishers, Stevenson Ranch,
CA, 2010. Editor: H. S. Nalwa, ISBN: 1-58883-146-7, Volume 15, 537-574, 2010.
Journal papers:
159. K. Ning, K. Lu, “Understanding ion irradiation resistance of a silicon diffused
nanostructured ferritic alloy-chromium carbide–carbon composite,” Composites Part B,
accepted.
158. Y. Bai, J. Zhao, Y. Li, Z. Lv, K. Lu, “Preparation and photocatalytic performance of
TiO2/PbTiO3 fiber composite enhanced by external force induced piezoelectric field,”
Journal of the American Ceramic Society, accepted.
157. 158. K. Bawane, D. Erb, K. Lu, “Carbon Content and Pyrolysis Atmosphere Effects on
Phase Development in SiOC Systems,” Journal of the European Ceramic Society, 39,
2846–2854, 2019.
156. K. Lu, D. Erb, K. Bawane, N. Yang, “Comparison of Traditional and Flash Pyrolysis of
Different Carbon Content Silicon Oxycarbides,” Journal of the European Ceramic Society,
39 (10), 3035-3041, 2019.
155. Y. Lin, K. Lu, R. Davis, “Patterning of ZnO Quantum Dot and PMMA Hybrids with a
Solvent Assisted Technique,” Langmuir., 35 (17) 5855-5863, 2019.
154. L. Wang, K. Lu, R. Ma, “Effects of Different Polymer Precursors on the Characteristics of
SiOC Bulk Ceramics,” Applied Physics A, 125, 395 (13 pages), 2019.
153. K. Lu, M. Gervasio, “Simulation Study of Nanoparticle-Polymer Organic Suspension
Stability,” Advanced Theory and Simulations, 2, 1900010 (14 pages), 2019.
https://doi.org/10.1002/adts.201900010.
152. L. Wang, K. Lu, “Phase Development of Silicon Oxycarbide Nanocomposites During Flash
Pyrolysis,” Journal of Materials Science, 54(8), 6073-6087, 2019.
151. M. Gervasio, K. Lu, “Monte Carlo Simulation Modeling of Nanoparticle-Polymer Co-
Suspensions,” Langmuir, 35 (1), 161–170, 2019.
150. K. Ning, K. Lu, R. Bortner, “High dose self-ion irradiated silicon carbide with
nanostructured ferritic alloy aid,” Journal of Materials Science, 54(1), 605–612, 2019.
149. M. Gervasio, K. Lu, “Sub-Micron Features from Polymer-Derived SiOC via Imprint
Lithography,” Journal of the European Ceramic Society, 39, 825-831, 2019.
148. K. Shen, K. Lu, “Comparison of Different Perovskite Cathodes in Solid Oxide Fuel Cells,”
Fuel Cells, accepted, 18(4), 2018, 457–465. DOI: 10.1002/fuce.201800044
147. K. Ning, H. Ju, K. Lu, “Effects of Ceramic Types on Evolution of Micron-Sized Features
During Sintering,” Journal of the American Ceramic Society, 102(2) 569-577, 2019.
146. J. Zhao, Y. Liu, Y. He, K. Lu, “Li4Ti5O12 epitaxial coating on LiNi0.5Mn1.5O4 surface for
improving the electrochemical performance through solvothermal-assisted processing,”
Journal of Alloys and Compounds, 779 (30) 978-984, 2019.
145. H. Ju, K. Ning, K. Lu, “Atmosphere Effects on Micron-Sized ZnO Ridges During
Sintering,” Journal of the European Ceramic Society, 38 (15), 5007-5014, 2018.
144. R. Ma; K. Lu, D. Erb, “Effect of Solvent in Preparation of SiOC Bulk Ceramics,” Materials
Chemistry and Physics, 218, 140-146, 2018.
143. K. Ning, K. Lu, “Fundamental Understanding of Centrifugal Micromolding for High
Fidelity Patterns,” Journal of the European Ceramic Society, 38 (15), 5167-5173, 2018.
142. R. Ma, D. Erb, K. Lu, “Flash Pyrolysis of Polymer-Derived SiOC Ceramics,” Journal of
the European Ceramic Society, 38 (15), 4906-4914, 2018.
141. D. Erb, K. Lu, “Effect of Additive Structure and Size on SiO2 Formation in Polymer
Derived SiOC Ceramics,” Journal of the American Ceramic Society, 101, 5378–5388,
2018.
140. K. Bawane, K. Ning, K. Lu, “High Temperature Oxidation Behavior of Silicon Carbide-
Carbon Coated Nanostructured Ferritic Alloy Composites in Water Vapor Environment,”
Corrosion Science, 139, 206-214, 2018.
139. K. Lu, L. Wang, “Accelerated Polymer to SiOC Nanocomposite Conversion,” Annals of
Materials Science and Engineering, 2018; 3(1): 1030 (4 pages).
138. K. Ning, K. Lu, “Water Vapor Thermal Treatment of Silicon Carbide-Nanostructured
Ferritic Steel Alloy (SiC-NFA) Composite Materials,” Applied Surface Science, 452, 248-
258, 2018.
137. K. Ning, D. Bai, K. Lu, “Study of Self-Ion Irradiated Nanostructured Ferritic Alloy (NFA)
and Silicon Carbide-Nanostructured Ferritic Alloy (SiC-NFA) Cladding Materials,” Nucl.
Instr. Meth. Phys. Res. B, 427, 44-52, 2018.
136. D. Erb, K. Lu, “Effect of SiO2-forming Additive in Polysiloxane Derived SiOC Ceramics,”
Microporous and Mesoporous Materials, 266, 75-82, 2018.
135. K. Ning, K. Lu, “Ion Irradiation Effect on Spark Plasma Sintered Silicon Carbide Ceramics
with Nanostructured Ferritic Alloy Aid,” Journal of the American Ceramic Society, 2018,
101:3662–3673.
134. D. Erb, K. Lu, “Influence of Vinyl Bonds from PDMS on the Pore Structure of Polymer
Derived Ceramics,” Materials Chemistry and Physics, 209, 217-226, 2018.
133. K. Ning, K. Lu, “Water Vapor Thermal Treatment Effects on Spark Plasma Sintered
Nanostructured Ferritic Alloy-Silicon Carbide Systems,” Journal of the American
Ceramic Society, 101, 2208–2215, 2018.
132. K. Lu, D. Erb, “Polymer Derived Silicon Oxycarbide Coatings,” International Materials
Reviews, 63 (3), 139–161, 2018.
131. K. Bawane, K. Ning, K. Lu, “High Temperature Treatment of Cr3C2@SiC-NFA
Composites in Water Vapor Environment,” Corrosion Science, 131, 365-375, 2018.
130. G. Li, M. R. von Spakovsky, F. Shen, K. Lu, “Multi-scale Transient and Steady State Study
of the Influence of Microstructure Degradation and Chromium Oxide Poisoning on SOFC
Cathode Performance,” Journal of Non-equilibrium Thermodynamics, 2018; 43(1) 21–
42.
129. H. Ju, K. Ning, K. Lu, “Sintering Behaviors of Micron-Sized Ceramic Rod Feature,” Acta
Materialia, 144 (1) 534-542, 2018.
128. K. Ning, Z. Hu, K. Lu, “Spark Plasma Sintering of SiC-NFA Composites with Carbon
Barrier Layer,” Journal of Nuclear Materials, 498, 50-59, 2018.
127. H. Ju, K. Ning, K. Lu, “Centrifuge-aided Micromolding of Micron- and Submicron-sized
Patterns,” Journal of the European Ceramic Society, 38 (2), 637-645, 2018.
126. H. Ju, K. Ning, K. Lu, “Roughening and Destructive Effect of Sintering on Micron-Sized
ZnO Features,” Acta Materialia, 141, 352-359, 2017.
125. J. Zhao, Y. Li, Y. Wu, S. Lv, K. Lu, “Microstructure of TiO2 Porous Ceramics by Freeze
Casting of Nanoparticle Suspensions,” Ceramics International, 43 (17), 14593-14598,
2017.
124. M. Gervasio, K. Lu, “Suspension-based Imprint Lithography of ZnO-PMMA Hybrids,”
Soft Matter, 13, 5569 – 5579, 2017.
123. K. Lu, D. Erb, “Additive and Pyrolysis Atmosphere Effects on Polysiloxane-Derived
Porous SiOC Ceramics,” Journal of the European Ceramic Society, 37 (15), 4547-4557,
2017.
122. J. Zhao, C. Zhang, C. Hu, K. Lu, “Effect of Thermal Treatment on TiO2 varistor Properties
in Different Atmospheres,” Journal of the European Ceramic Society, 37, 3353–3359,
2017.
121. K. Ning, Z. Hu, K. Lu, “Spark Plasma Sintering of Silicon Carbide (SiC)-Nanostructured
Ferritic Alloy (NFA) Composites with Chromium Carbide Barrier Layer,” Materials
Science and Engineering A, 700 (17) 183–190, 2017.
120. M. Gervasio, K. Lu, “PMMA-ZnO Hybrid Arrays Using In-situ Polymerization and
Imprint Lithography,” Journal of Materials Chemistry C, 121 (21), 11862–11871, 2017.
119. M. Yao, J. Zhao, S. Lv, Kathy Lu, “Preparation and Hydrogenation of Urchin-like
Titanium Using a One-Step Hydrothermal Method,” Ceramics International, 43, 6925–
6931, 2017.
118. K. T. Faber, T. Asefa, M. Backhaus-Ricoult, R. Brow, J. Chan, S. Dillon, W. Fahrenholtz,
M. W. Finnis, J. E. Garay, E. Garcia, Y. Gogotsi, S. M. Haile, J. Halloran, J. Hu, L. Huang,
S. Jacobsen, E. Lara-Curzio, J. LeBeau, W. E. Lee, C. G. Levi, I. Levin, J. A. Lewis, D.
M. Lipkin, K. Lu, J. Luo, J.-P. Maria, L. W. Martin, S. Martin, G. Messing, A. Navrotsky,
N. Padture, C. Randall, G. S. Rohrer, A. Rozenflanz, T. Schaedler, D. Schlom, A.
Sehirlioglu, A. Stevensen, T. Tani, V. Tikare, S. Trolier-McKinstry, H. Wang, and B.
Yildiz, “The Role of Ceramic and Glass Science Research in Meeting Societal Challenges:
A Report from an NSF-Sponsored Workshop on Emerging Opportunities,” Journal of the
American Ceramic Society, 100, 1777–1803, 2017.
117. F. Shen, K. Lu, “Co3O4/Sm-doped CeO2 (SDC)/Co3O4 Tri-layer Coating on AISI 441
Interconnect for Solid Oxide Fuel Cells,” ACS Applied Materials & Interfaces, 9 (7),
6022–6029, 2017.
116. Z. Hu, K. Ning, K. Lu, “Spark Plasma Sintered Silicon Carbide Ceramics with
Nanostructured Ferritic Alloy as Sintering Aid,” Materials Science and Engineering A,
682, 586-592, 2017.
115. F. Shen, K. Lu, “CoxFe1-x Oxide Coatings on AISI 441 for Solid Oxide Fuel Cells,” Journal
of Power Sources, 330, 231-239, 2016.
114. Z. Hu, K. Ning, K. Lu, “Study of Spark Plasma Sintered Silicon Carbide with
Nanostructured Ferritic Alloy Addition,” Materials Science and Engineering A, 670, 75-
80, 2016.
113. Y. Wu, J. Zhao, Y. Li, K. Lu, “Preparation and Freezing Behavior of TiO2 Nanoparticle
Suspensions,” Ceramics International, 42, 15597–15602, 2016.
112. K. Lu, D. Erb, M. Liu, “Phase Transformation, Oxidation Stability, and Electrical
Conductivity of TiO2-Polysiloxane Derived Ceramics,” Journal of Materials Science, 51,
10166–10177, 2016.
111. F. Shen, K. Lu, “Perovskite-type La0.6Sr0.4Co0.2Fe0.8O3, Ba0.5Sr0.5Co0.2Fe0.8O3, and
Sm0.5Sr0.5Co0.2Fe0.8O3 Cathode Materials for Solid Oxide Fuel Cells,” Electrochemical
Acta, 211, 445–452, 2016.
110. J. Zhao, Y. He, L. Zhang, K. Lu, “Preparation of Porous TiO2 Powder with Mesoporous
Structure by Freeze-drying Method,” Journals of Alloys and Compounds, 678, 36-41,
2016.
109. K. Lu, D. Erb, M. Liu, “Thermal Stability and Electrical Conductivity of Carbon-Enriched
Silicon Oxycarbide,” Journal of Materials Chemistry C, 4, 1829-1837, 2016.
108. K. Lu, J. Li, “Fundamental Understanding of Water Vapor Effect on SiOC Evolution
during Pyrolysis,” Journal of the European Ceramic Society, 36, 411–422, 2016.
107. F. Shen, K. Lu, “Comparative Study of La0.6Sr0.4Co0.2Fe0.8O3, Ba0.5Sr0.5Co0.2Fe0.8O3 and
Sm0.5Sr0.5Co0.2Fe0.8O3 Cathodes and the Effect of Sm0.2Ce0.8O2 Block Layer in Solid
Oxide Fuel Cells,” International Journal of Hydrogen Energy, 40, 16457-16465, 2015.
106. K. Lu, “Porous and High Surface Area SiOC Materials-A Review,” Materials Science and
Engineering-R, 97, 23–49, 2015.
105. M. Gervasio, K. Lu, R. Davis, “Experimental and Modeling Study of Solvent Diffusion in
PDMS Stamp for Nanoparticle-Polymer Co-suspensions,” Langmuir, 31(36), 9809–9816,
2015.
104. F. Shen, K. Lu, “La0.6Sr0.4Co0.2Fe0.8O3 Cathodes Incorporated with Sm0.2Ce0.8O2 by Three
Different Methods for Solid Oxide Fuel Cells,” Journal of Power Sources, 296(20), 318–
326, 2015.
103. J. Li, K. Lu, “Highly Porous SiOC Bulk Ceramics with Water Vapor Assisted Pyrolysis,”
Journal of the American Ceramic Society, 98(8), 2357–2365, 2015.
102. J. Li, K. Lu, T. Lin, K. Shen, “Preparation of Micro-/Meso-porous SiOC Bulk Ceramics,”
Journal of the American Ceramic Society, 98(6), 1753–1761, 2015.
101. K. Lu, M. Liu, M. Gervasio, “Nanoparticle and Poly(methyl methacrylate) Co-dispersion
in Anisole," Journal of Materials Science, 50(14), 4836-4844, 2015.
100. J. Zhao, L. Zhang, W. Xing, and K. Lu, “A Novel Method to Prepare B/N Co-doped
Anatase TiO2,” Journal of Physical Chemistry, 119, 7732−7737, 2015.
99. J. Zhao, K. Zhang, Y. Lin, K. Lu, “Preparation of Separated and Open End TiO2
Nanotubes,” Ceramics International, 41, 7235–7240, 2015.
98. J. Zhao, W. Xing, Y. Li, K. Lu, “Solvothermal Synthesis and Visible Light Absorption of
Anatase TiO2 (001) Facets,” Materials Letters, 145, 332–335, 2015.
97. G. Kaur, V. Kumar, G. Pickrell, K. Lu, “Interfacial Compatibility of Alumino-Borosilicate
Glass Sealants with AISI 441 and YSZ for Different Atmospheres,” International Journal
of Hydrogen Energy, 40 (2) 1195–1202, 2015.
96. F. Shen, K. Lu, “Moisture Effect on La0.8Sr0.2MnO3 and La0.6Sr0.4Co0.2Fe0.8O3 Cathode
Behaviors in Solid Oxide Fuel Cells,” Fuel Cells, 15, 105–114, 2015.
95. V. Kumar, G. Kaur, K. Lu, O. P. Pandey, K. Singh, “Effect of Thermal Treatment on
Chemical Interaction Between Yttrium Borosilicate Glass Sealants and YSZ for Planar
Solid Oxide Fuel Cells,” International Journal of Applied Glass Science, 5(4) 410–420,
2014.
94. J. Z. Zhao, B. X. Wang, K. Lu, “Influence of Ta2O5 Doping and Microwave Sintering on
TiO2-based Varistor Properties,” Ceramics International, 40, 14229–14234, 2014.
93. K. Lu , F. Shen, R. Roberts, G. Doucette, M. McGuire, W. Li, “(LaSr)xMnO3 Cathode
Stoichiometry Effects on Electrochemical Performance in Contact with AISI 441 Steel
Interconnect,” Journal of Power Sources, 268 (15) 379–387, 2014.
92. Z. Hu, K. Lu, “Evolution of Pores and Tortuosity During Sintering,” Journal of the
American Ceramic Society, 97(8), 2383–2386, 2014.
91. K. Lu, F. Shen, “Effect of Stoichiometry on (La0.6Sr0.4)xCo0.2Fe0.8O3 Cathode Evolution in
Solid Oxide Fuel Cells,” Journal of Power Sources, 267, 421–429, 2014.
90. V. Kumar, O. P. Pandey, K. Singh, K. Lu, “Interaction Study of Yttria Based Glasses with
High Temperature Electrolyte for SOFC,” Fuel Cells, 14(4), 635–644, 2014.
89. K. Lu, “Effects of Nb2O5 as Seeds and Trisodium Citrate as Suppressing Agent on LiNbO3
Formation,” Materials Letters, 126, 63–66, 2014.
88. K. Lu, F. Shen, “Long Term Behaviors of La0.8Sr0.2MnO3 and La0.6Sr0.4Co0.2Fe0.8O3 as
Cathodes for Solid Oxide Fuel Cells,” International Journal of Hydrogen Energy, 39, 7963-
7971, 2014.
87. K. Lu, W. Li, “Study of An Intermediate Temperature Solid Oxide Fuel Cell Sealing Glass
System,” Journal of Power Sources, 245, 752-757, 2014.
86. K. Lu, “Nanomaterials: Bringing New Excitements to the Energy World,” Annals of
Material Science and Engineering, 1(1), 1-2, 2014.
85. B. Chen, Z. Xia, K. Lu, “Understanding Sintering Characteristics of ZnO Nanoparticles by
FIB-SEM Three-Dimensional Analysis,” Journal of the European Ceramic Society, 33,
2499–2507, 2013.
84. B. Chen, J. Hou, K. Lu, “Formation Mechanism of TiO2 Nanotubes and Their Applications
in Photoelectrochemical Water Splitting and Supercapacitors,” Langmuir, 29(19), 5911–
5919, 2013.
83. Z. Xia, B. Chen, K. Lu, “3D Microstructure Construction of Sintered ZrO2 under Different
Sintering Conditions,” Journal of Materials Science, 48(17), 5852-5861, 2013.
82. W. Li, K. Lu, J. Y. Walz, “Effects of Solids Loading on Sintering and Properties of Freeze-
Cast Kaolinite-Silica Porous Composites,” Journal of the American Ceramic Society, 96,
1763–1771, 2013.
81. W. Li, K. Lu, Z. Xia, “Interaction of (La1-xSrx)nCo1-yFeyO3-δ Cathodes and AISI 441
Interconnect for Solid Oxide Fuel Cells,” Journal of Power Sources, 237, 119-127, 2013.
80. W. Li, K. Lu, J. Y. Walz, M. Anderson, “Effects of Rod-like Particles on the Microstructure
and Strength of Freeze-cast Silica Nanoparticle Composites,” Journal of the American
Ceramic Society, 96, 398–406, 2013.
79. B. Chen, K. Lu, “Selective Focused-ion-beam Sculpting of TiO2 Nanotubes and Mechanism
Understanding,” Physical Chemistry Chemical Physics, 15(6), 1854 –1862, 2013.
78. B. Chen, K. Lu, K. Ramsburg, “ZnO Sub-Micrometer Rod Array by Soft Lithographic
Micromolding with High Solid Loading Nanoparticle Suspension,” Journal of the American
Ceramic Society, 96(1), 73–79, 2013.
77. W. Li, K. Lu, J. Y. Walz, “Fabrication of Porous Nanocomposites with Controllable Specific
Surface Area and Strength via Suspension Infiltration,” Langmuir, 28(47), 16423–16429,
2012.
76. K. Lu, Y. Liang, W. Li, “Hindered Sintering Behaviors of Titania Nanoparticle-based
Materials,” Materials Letters, 89, 77–80, 2012.
75. W. Li, K. Lu, J. Y. Walz, “Effects of Added Kaolinite on the Strength and Porosity of
Freeze-Cast Kaolinite-Silica Nanocomposites,” Journal of Materials Science, 47(19), 6882-
6890, 2012.
74. K. Lu, “Newfound Capability of Focused Ion Beam Patterning Guided Anodization,”
Electrochimica Acta, 63, 256–262, 2012.
73. Y. Liang, K. Lu, “Titania Nanoparticle Suspension for Fabrication of Micron Feature Arrays
via a Template-assisted Approach,” International Journal of Applied Ceramic Technology,
9 (5), 911–919, 2012.
72. B. Chen, K. Lu, “Hierarchically Branched Titania Nanotubes with Tailored Diameters and
Branch Numbers,” Langmuir, 28(5), 2937-2943, 2012.
71. T. Jin, K. Lu, “Chromium Deposition and Interfacial Interactions of an Electrolyte-Air
Electrode-Interconnect Tri-layer for Solid Oxide Fuel Cells,” Journal of Power Sources,
202, 143– 148, 2012.
70. W. Li, K. Lu, J. Y. Walz, “Effects of Added Kaolinite on Sintering of Freeze-Cast Kaolinite-
Silica Nanocomposite I. Microstructure and Phase Transformation,” Journal of the
American Ceramic Society, 95, 883–891, 2012.
69. T. Jin, K. Lu, “Surface and Interface Behaviors of Sr-doped Lanthanum Manganite Air
Electrode in Different Moisture Atmospheres,” Journal of Power Sources, 197, 20-27, 2012.
68. W. Li, K. Lu, J. Y. Walz, “Freeze Casting of Porous Materials-A Review of Critical Factors
in Microstructure Evolution,” International Materials Reviews, 57(1), 37-60, 2012.
67. K. Lu, T. Jin, “Surface Devitrification of a High Temperature Sealing Glass,” Materials
Research Innovations, 15(6), 386-390, 2011.
66. B. Chen, K. Lu, Z. Tian, “Understanding Focused Ion Beam Guided Anodic Alumina
Nanopore Development,” Electrochimica Acta, 56, 9802– 9807, 2011.
65. B. Chen, K. Lu, “Influence of Patterned Concave Depth and Surface Curvature on
Anodization of Titania Nanotubes and Alumina Nanopores,” Langmuir, 27(19), 12179–
12185, 2011.
64. B. Chen, K. Lu, J. A. Geldmeier, “Highly Ordered Titania Nanotube Arrays with Square,
Triangular, and Sunflower Structures,” Chemical Communications, 47 (36), 10085-10087,
2011.
63. B. Chen, K. Lu, “Moiré Pattern Nanopore and Nanorod Arrays by Focused Ion Beam
Guided Anodization and Nanoimprint Molding,” Langmuir, 27(7), 4117–4125, 2011.
62. M. K. Mahapatra, K. Lu, “Sealing Evaluation of an Alkaline Earth Silicate Glass for Solid
Oxide Fuel/Electrolyzer Cells,” Fuel Cells, 11(3), 436–444, 2011.
61. K. Lu, C. Hammond, “Nanoparticle-based Surface Templating,” International Journal of
Applied Ceramic Technology, 8(4), 965–976, 2011.
60. T. Jin, K. Lu, “Surface and Interface Behaviors of (La0.8Sr0.2)xMnO3 Air Electrode for Solid
Oxide Cells,” Journal of Power Sources, 196, 8331– 8339, 2011.
59. K. Lu, Z. Tian, J. A. Geldmeier, “Polishing Effect on Anodic Titania Nanotube Formation,”
Electrochimica Acta, 56, 6014– 6020, 2011.
58. B. Chen, K. Lu, Z. Tian, “Effects of Titania Nanotube Distance and Arrangement during
Focused Ion Beam Guided Anodization,” Journal of Materials Chemistry, 21(24), 8835 –
8840, 2011.
57. T. Jin, K. Lu, “Chemical Compatibility between Sr-doped Lanthanum Manganite Air
Electrode and AISI 441 Interconnect,” International Journal of Hydrogen Energy, 36, 4440-
4448, 2011.
56. B. Chen, K. Lu, Z. Tian, “Novel Patterns by Focused Ion Beam Guided Anodization,”
Langmuir, 27(2), 800–808, 2011.
55. W. Li, K. Lu, J. Y. Walz, “Formation, Structure and Properties of Freeze-Casted Kaolinite-
Silica Nanocomposites,” Journal of the American Ceramic Society, 94(4), 1256–1264,
2011.
54. M. K. Mahapatra, K. Lu, “Seal Glass Compatibility with Bare and (Mn,Co)3O4 Coated
Crofer 22 APU Alloy in Different Atmospheres,” Journal of Power Sources, 196, 700–708,
2011.
53. M. K. Mahapatra, K. Lu, “Effect of Atmosphere on Interconnect-Seal Glass Interaction for
Solid Oxide Fuel/Electrolyzer Cells,” Journal of the American Ceramic Society, 94(3), 875–
885, 2011.
52. Z. Tian, K. Lu, B. Chen, “Fundamental Mechanisms of Focused Ion Beam Guided
Anodization,” Journal of Applied Physics, 108, 094306-1-7, 2010.
51. Z. Tian, K. Lu, B. Chen, “Unique Nanopore Pattern Formation by Focused Ion Beam
Guided Anodization,” Nanotechnology, 21, 405301-1-7, 2010.
50. M. K. Mahapatra, K. Lu, “Seal Glass Compatibility with Bare and (Mn,Co)3O4 Coated AISI
441 Alloy in Solid Oxide Fuel/Electrolyzer Cell Atmospheres,” International Journal of
Hydrogen Energy, 35, 11908-11917, 2010.
49. B. Chen, K. Lu, Z. Tian, “Gradient and Alternating Diameter Nanopore Templates by
Focused Ion Beam Guided Anodization,” Electrochimica Acta, 56, 435–440, 2010.
48. M. K. Mahapatra, K. Lu, “Seal Glass for Solid Oxide Fuel Cells,” Journal of Power Sources,
195(21), 7129–7139, 2010.
47. M. K. Mahapatra, K. Lu, X. Liu, J. Wu, “Compatibility of A Seal Glass with (Mn,Co)3O4
Coated Interconnects: Effect of Atmosphere,” International Journal of Hydrogen Energy,
35, 7945-7956, 2010.
46. K. Lu, J. Zhao, “Focused Ion Beam Lithography and Anodization Combined Nanopore
Patterning,” Journal of Nanoscience and Nanotechnology, 10(10), 6760-6768, 2010.
45. K. Lu, R. M. German, “Microstructure Analysis of Samples Sintered at Different
Gravitational Conditions,” Journal of Materials Science, 45, 4454–4461, 2010.
44. K. Lu, J. Zhao, “Equiaxed Zinc Oxide Nanoparticle Synthesis,” Chemical Engineering
Journal, 160, 788–793, 2010.
43. T. Jin, K. Lu, “Compatibility between AISI441 Alloy Interconnect and Representative Seal
Glasses in Solid Oxide Fuel/Electrolyzer Cells,” Journal of Power Sources, 195, 4853-4864,
2010.
42. M. K. Mahapatra, K. Lu, “Glass-based Seals for Solid Oxide Fuel and Electrolyzer Cells –
A Review,” Materials Science and Engineering R, 67, 65–85, 2010.
41. K. Lu, C. Hammond, J. Qian, “Surface Patterning Nanoparticle-Based Arrays,” Journal of
Materials Science, 45, 582–588, 2010.
40. T. Jin, K. Lu, “Thermal Stability of a New Solid Oxide Fuel/Electrolyzer Cell Seal Glass,”
Journal of Power Sources, 195, 195–203, 2010.
39. M. K. Mahapatra, K. Lu, “Thermochemical Compatibility of a Seal Glass with Different
Solid Oxide Cell Components,” International Journal of Applied Ceramic Technology, 7(1),
10-21, 2010.
38. M. K. Mahapatra, K. Lu, “Interfacial Study of Crofer 22 APU Interconnect-SABS-0 Seal
Glass for Solid Oxide Fuel/Electrolyzer Cells,” Journal of Materials Science, 44(20), 5569-
5578, 2009.
37. K. Lu, X. Zhu, K. Nagarathnam, “Nickel-Boron Nanolayer Coated Boron Carbide
Pressureless Sintering,” Journal of the American Ceramic Society, 92(7), 1500–1505, 2009.
36. K. Lu, “Hierarchical and Nanosized Pattern Formation Using Dual Beam Focused Ion Beam
Microscope,” Journal of Nanoscience and Nanotechnology, 9(4), 2598-2602, 2009.
35. J. Qian, K. Lu, “Multiwall Carbon Nanotube and TiO2 Sol Assembly,” Journal of
Nanoscience and Nanotechnology, 9, 1-7, 2009.
34. M. K. Mahapatra, K. Lu, and R. J. Bodnar, “Network Structure and Thermal Property
Relation of a Novel High Temperature Seal Glass,” Applied Physics A, 95, 493–500, 2009.
33. X. Zhu, K. Lu, K. Nagarathnam, “Compaction of Different Boron Carbide Powders Using
Uniaxial Die Compaction and Combustion Driven Compaction,” Journal of Materials
Science, 44, 414–421, 2009.
32. K. Lu, M. Hiser, W. Wu, “Effect of Particle Size on Three Dimensional Printed Mesh
Structures,” Powder Technology, 192, 178–183, 2009.
31. K. Lu, X. Zhu, “Nickel-Boron Nanolayer Evolution on Boron Carbide Particle Surfaces
during Thermal Treatment,” Thin Solid Films, 517, 4479-4483, 2009.
30. H. Dong, K. Lu, “Attaching Titania Nanoparticles onto Shortened Carbon Nanotubes by
Electrostatic Attraction,” International Journal of Applied Ceramic Technology, 6(2), 216–
222, 2009.
29. K. Lu, “A Study of Engineering Freshmen on Perception of Nanotechnology,” Journal of
STEM Education, 10(1-2), 7-16, 2009.
28. K. Lu, M. K. Mahapatra, “Network Structure and Thermal Stability Study of High
Temperature Seal Glass,” Journal of Applied Physics, 104, 074910-1-9, 2008.
27. M. Mahapatra, K. Lu “Effects of Nickel on Network Structure and Thermal Properties of a
New Solid Oxide Cell Seal Glass,” Journal of Power Sources, 185, 993–1000, 2008.
26. H. Dong, X. Zhu, K. Lu, “Morphology and Composition of Nickel-Boron Nanolayer
Coating on Boron Carbide Particles,” Journal of Materials Science, 43, 4247-4256, 2008.
25. H. Zhang, Z. An, F. Li, Q. Tang, K. Lu, W. Li, “Synthesis and Characterization of
Mesoporous c-ZrO2 Microspheres Consisting of Peanut-like Nano-grains,” Journal of
Alloys and Compounds, 464, 569-574, 2008.
24. M. K. Mahapatra, K. Lu, W. T. Reynolds, “Thermophysical Properties and Devitrification
of SrO-La2O3-Al2O3-B2O3-SiO2 Based Glass Sealant for Solid Oxide Fuel/Electrolyzer
Cells,” Journal of Power Sources, 179, 106-112, 2008.
23. K. Lu, W. T. Reynolds, “3DP Process for Fine Mesh Structure Printing,” Powder
Technology, 187, 11-18, 2008.
22. C. Story, K. Lu, W. T. Reynolds Jr., D. Brown, “Shape Memory Alloy/Glass Composite
Seal for Solid Oxide Fuel Cells,” International Journal of Hydrogen Energy, 33 (14), 3970-
3975, 2008.
21. X. Zhu, H. Dong, K. Lu, “Coating Different Thickness Nickel-Boron Nanolayers onto
Boron Carbide Particles,” Surface and Coatings Technology, 202, 2927-2934, 2008.
20. K. Lu, “Sintering of Nanoceramics,” International Materials Review, 53(1), 21-38, 2008.
19. K. Lu, X. Zhu, “Freeze Casting as a Nanoparticle Material Forming Method,” International
Journal of Applied Ceramic Technology, 5(3), 219–227, 2008.
18. K. Lu, “Freeze Cast Carbon Nanotube-Alumina Nanoparticle Green Composites,” Journal
of Materials Science, 43(2), 652-659, 2008.
17. K. Lu, “Theoretical Analysis of Colloidal Interaction Energy in Nanoparticle Suspensions,”
Ceramics International, 34 (6), 1353-1360, 2008.
16. K. Lu, “Microstructural Evolution of Nanoparticle Aqueous Colloidal Suspensions during
Freeze Casting,” Journal of the American Ceramic Society, 90(12), 3753-16423
15. K. Lu, “Rheological Behavior of Carbon Nanotube-Alumina Nanoparticle Dispersion
Systems,” Powder Technology, 177, 154–161, 2007
14. K. Lu, C. S. Kessler, and R. M. Davis, “Optimization of a Nanoparticle Suspension for
Freeze Casting,” Journal of the American Ceramic Society, 89(8), 2459-2465, 2006.
13. K. Lu, C. S. Kessler, “Colloidal Dispersion and Rheology Study of Nanoparticles,” Journal
of Materials Science, 41(17), 5613-5618, 2006.
12. K. Lu, W. X. Li, and J. J. Lannutti, “Density Gradients and the Expansion-Shrinkage
Transition during Sintering,” Acta Materialia, 52, 2057-2066, 2004.
11. Xu, X, K. Lu, and R. M. German, “Densification and Strength Evolution in Solid-State
Sintering, Part II Strength Model,” Journal of Materials Science, 37, 117-126, 2002.
10. K. Lu, R. M. German, and X. Xu, “Microstructural Evolution and Macroscopic Behavior
during Solid State Sintering,” Powder Metallurgy, 44(4), 363-368, 2001.
9. K. Lu, R. M. German, and R. G. Iacocca, “Presintering Effects on Ground-based and
Microgravity Liquid Phase Sintering,” Metallurgical and Materials Transactions, 32A (8),
2097-2107, 2001.
8. K. Lu, X. Xu, W. Yi, and R. M. German, “Porosity Effect on Densification and Shape
Distortion in Liquid Phase Sintering,” Materials Science and Engineering, 318, 111-121,
2001.
7. K. Lu, R. M. German, and B. M. Marx, “Liquid Phase Sintering of Tungsten Heavy
Alloys,” International Journal of Powder Metallurgy, 37(6), 45-56, 2001.
6. W. Yi, X. Xu, K. Lu, R. M. German, “Green Microstructure Effects on Densification and
Distortion in Liquid Phase Sintering,” International Journal of Refractory Metals & Hard
Materials, 19, 149-158, 2001.
5. K. Lu and R. M. German, “Multiple Grain Growth Events in Liquid Phase Sintering,”
Journal of Materials Science, 36(14), 3385-3394, 2000.
4. B. M. Marx, K. Lu and R. M. German, “Macropore Evolution in Microgravity Sintered
Samples,” The International Journal of Powder Metallurgy, 37, 11-12, 2001.
3. K. Lu, and J. J. Lannutti, “Effect of Density Gradients on Dimensional Tolerance during
Binder Removal,” Journal of the American Ceramic Society, 83(10), 2536-2542, 2000.
2. K. Lu, and J. J. Lannutti, “Density Gradients and Sintered Dimensional Tolerance in
Compacts Formed from Spray-Dried Alumina,” Journal of the American Ceramic Society,
83(6), 1393-1398, 2000.
1. K. Lu, J. J. Lannutti, P. Klobes, and K. Meyer, “X-ray Computed Tomography and Mercury
Porosimetry for Evaluation of Density Evolution and Porosity Distribution,” Journal of the
American Ceramic Society, 83(3), 518-522, 2000.
Conference Proceedings:
Technical papers:
22. K. Ning, Z. Hu, K. Lu, “Fabrication of New NFA-SiC Composites for Nuclear
Applications,” 2016 American Nuclear Society Winter Meeting Proceeding, ISBN: 978-0-
89448-732-3.
21. K. Lu, W. Li, G. Li, “Understanding Diamond Nanoparticle Evolution During Zirconia
Spark Plasma Sintering,” Proceeding of the 38th Int'l Conf & Expo on Advanced Ceramics
& Composites (ICACC 2014), Daytona Beach, Florida, January 26-31, 2014. Editors: A.
Gyekenyesi, M. Halbig.
20. W. Li, M. Anderson, K. Lu, J. Y. Walz, “Fabrication of Porous Mullite by Freeze Casting
and Sintering of Alumina-Silica Nanoparticles,” Advances in Synthesis, Processing, and
Applications of Nanostructures, Proceeding of Materials Science & Technology 2011
Conference and Exhibit (MS&T '11), October 16-20, 2011, Columbus, OH, Ceramic
Transactions, Vol 238, John Wiley & Sons, 2012, Editors: K. Lu, N. Manjooran, R.
Murakami, G. Pickrell, page 57-64.
19. K. Lu, B. Chen, “Single Nanometer TiO2 Particle Synthesis and Soft Lithographic
Molding,” Proceedings of 2011 NSF Engineering Research and Innovation Conference,
Atlanta, Georgia, January 4-7, 2011.
18. K. Lu, B. Chen, Z. Tian, “Directed Patterning: Focused Ion Beam Guided Anodization,”
Proceedings of 2011 NSF Engineering Research and Innovation Conference, Atlanta,
Georgia, January 4-7, 2011.
17. W. Li, K. Lu, J. Y. Walz, “Freezing Behavior and Properties Of Freeze Cast Kaolinite-
Silica Porous Nanocomposite,” Ceramic Transactions, Proceeding of Materials Science &
Technology 2010 Conference and Exhibit (MS&T '10), October 17-21, 2010, Houston,
TX, John Wiley & Sons, 2011, p57-68.
16. B. Chen, K. Lu, Z. Tian, “Effect of Focused Ion Beam Patterning on Enlarging Anodization
Window and Interpore Distance for Ordered Porous Anodic Alumina,” Ceramic
Transactions, Proceeding of Materials Science & Technology 2010 Conference and
Exhibit (MS&T '10), October 17-21, 2010, Houston, TX, John Wiley & Sons, 2011, p3-
11.
15. J. Walz, K. Lu, “Properties of Freeze-Casted Composites of Silica and Kaolinite,” Editors:
K. Lu, C. Li, E. Medvedovski, E. A. Olevsky, Processing of Nanoparticle Materials and
Nanostructured Films, Ceramic Transactions, Volume 223, 2010, ISBN 978-0-470-92731-
1, Wiley-Blackwell, p79-86.
14. J. Zhao, K. Lu, B. Chen, Z. Tian, “Patterning by Focused Ion Beam Assisted Anodization,”
Editors: K. Lu, C. Li, E. Medvedovski, E. A. Olevsky, Processing of Nanoparticle
Materials and Nanostructured Films, Ceramic Transactions, Volume 223, ISBN 978-0-
470-92731-1, Wiley-Blackwell, p47-56, 2010.
13. K. Lu, Chase Hammond, “Nanoparticle-based Array Creation by Templating,”
Proceedings of 2009 NSF Engineering Research and Innovation Conference, Honolulu,
Hawaii, June 22-25, 2009.
12. K. Lu, X. Zhu, “Ni-B Nanolayer Evolution on Boron Carbide Particle Surfaces at High
Temperatures,” Processing of Nanoparticle Structures and Composites: Ceramic
Transactions, Vol. 208, 133-141, Editors: T. Hinklin, K. Lu, 2009, John Wiley & Sons.
11. K. Lu, C. Hammond, “Nanoparticle-based Bulk Material Templating,” Processing of
Nanoparticle Structures and Composites: Ceramic Transactions, Vol. 208, 1-10, Editors:
T. Hinklin, K. Lu, 2009, John Wiley & Sons.
10. X. Zhu, K. Lu, H. Dong, C. Glomb, E. Logan, K. Nagarathnam, “Applying Nickel
Nanolayer Coating onto B4C Particles for Processing Improvement,” 32nd International
Cocoa Beach Conference and Exposition on Advanced Ceramics and Composites, January,
2008, Daytona Beach, FL. Ceramic Engineering and Science Proceedings, 29(8), 117-129,
2008, Editors: Tatsuki Ohji, Andrew Wereszczak.
9. K. Lu, X. Zhu, K. Nagarathnam, “Coating Ni-B Nanolayer onto Boron Carbide Particles for
High Density Forming,” Proceedings of 2008 NSF Engineering Research and Innovation
Conference, Knoxville, Tennessee, Jan. 7-10, 2008.
8. M. K. Mahapatra, C. Story, K. Lu, W. T. Reynolds, “Glass-Ceramic Seal Stability Study for
Solid Oxide Electrolyer/Fuel Cells,” Proceeding of Materials Science and Technology 2007
Conference, September 16-20, 2007, Detroit, Michigan, Energy: Fuel Cells: Materials,
Processing, Manufacturing and Power Management Technologies, Organized by P. Singh,
A-M. Azad, D. C. Collins, P. N. Kumta, C. Legzdins, A. Manthiram, A. Manivannan, S. K.
Sundaram, and Z. G. Yang. p371-380.
7. X. J. Zhu, K. Lu, “Electroless Nickel Coating of Boron Carbide Particles,” Proceeding of
2006 Materials Science & Technology International Conference, Cincinnati, OH, October
15-19, 2006. Innovative Processing and Synthesis of Ceramics, Glasses and Composites,
Organized by N.P. Bansal, and J.P. Singh, 421-431, vol. 4
6. K. Lu, “Carbon Nanotube and Alumina Nanoparticle Suspension and Freeze Casting Study,”
Proceeding of 2006 Materials Science & Technology International Conference, Cincinnati,
OH, October 15-19, 2006. vol. 2, 463-471, Nanomaterials: Science and Technology,
Organized by S. Mathur, R.M. Laine, M.Z. Hu, J. Vartuli, O.B. Koper.
5. K. Lu, C. S. Kessler, “Nanoparticle Colloidal Suspension Optimization and Freeze-Cast
Forming,” Ceramic Engineering and Science Proceedings, Synthesis and Processing of
Nanostructured Materials, Vol. 27, Is. 8, 2006, p1-10, Ed. W. M. Mullins, A. Wereszczak,
and E. Lara-Curzio, Proceeding of 30th International Conference on Advanced Ceramics
and Composite, American Ceramic Society, Cocoa Beach, FL.
4. Y. He, R. S. Engel, N. J. Salamon, S. Lindner, K. Lu, “Numerical Simulation for 316L
Stainless Steel Powder Die Compaction Process,” 2001 Fine Powder Processing
International Conference Proceedings, p153-166, 2001, University Park, PA 16802.
3. W. Yi, K. Lu, and R. M. German, “Shape Distortion and Dimensional Precision in Tungsten
Heavy Alloy Liquid Phase Sintering.” Proceeding of 15th International Plansee Seminar, G.
Kneringer et. al, ed., Plansee AG, Reutte 2001.
Teaching papers:
2. C. B. Burgoyne, M. Roman, C. Evia, C. Suchicital, K. Lu, J. Jinscheck, “Work-in-Progress:
Development and Implementation of a Web-Based Teaching Resource Site to Prepare
International Teaching and Research Faculty for the American Classroom,” Proceeding of
ASEE/IEEE Frontiers in Education Conference (San Diego, CA, October 28-31, 2006), pp.
M4G1-M4G2.
1. K. Lu, C. S. Kessler, “Nanotechnology Readiness among a Diverse Student Population,”
Proceeding of Mid-Atlantic Conference on the Scholarship of Diversity, Roanoke, VA,
March 17-18, 2005.
Invited Talks
37. K. Lu, “Porous Silicon Oxycarbide Without Foreign Additives,” Eleventh International
Conference on High-Performance Ceramics (CICC-11), Kunming, China, May 25-29, 2019.
36. K. Lu, “Phase Development of Silicon Oxycarbide Nanocomposites Under Different
Conditions,” Eleventh International Conference on High-Performance Ceramics (CICC-11),
Kunming, China, May 25-29, 2019.
35. K. Lu, K. Bawane, K. Ning, “Nanostructured Ferritic Alloy-Silicon Carbide Composites for
Nuclear Applications,” 2019 TMS Annual Meeting & Exhibition, San Antonio, Texas,
March 10-14, 2019.
34. K. Lu, D. Erb, L. Wang, and R. Ma, “Silicon Oxycarbide Through Flash Pyrolysis,” 43rd
International Conference and Exposition on Advanced Ceramics and Composites, Daytona
Beach, FL, January 27-February 1, 2019.
33. K. Lu, “Sintering Behaviors of Micron- and Submicron-sized Features,” Lehigh University
MSE Departmental Seminar speaker, March 27, 2018.
32. K. Lu, Donald Erb, “Effect of Reactive Additives on Polysiloxane Derived SiOC Porous
Ceramics,” 42nd International Conference and Exposition on Advanced Ceramics and
Composites, January 21-26, Daytona Beach, FL, 2018.
31. K. Lu, H. Ju, “Sintering Behaviors of Micron- and Submicron-Sized ZnO Features,”
International Conference on Sintering 2017, San Diego, CA, November 12-16, 2017.
30. K. Lu, K. Ning, “SiC-NFA Composites for Nuclear Cladding Applications,” Frontiers in
Materials Processing Applications, Research and Technology, Bordeaux, France, July 9-12,
2017.
29. K. Lu, D. Erb, “Additive and Pyrolysis Atmosphere Effects on High Surface Area Silicon
Oxycarbides,” Frontiers in Materials Processing Applications, Research and Technology,
Bordeaux, France, July 9-12, 2017.
28. K. Lu, “Solid Oxide Fuel Cell Interconnect Coatings,” 12th Pacific Rim Conference on
Ceramic and Glass Technology, Waikaloa, HI, May 21-26, 2017.
27. K. Lu, “Polysiloxane-Derived Porous SiOC Ceramics,” 12th Pacific Rim Conference on
Ceramic and Glass Technology, Waikaloa, HI, May 21-26, 2017.
27. K. Lu, K. Ning, K. Bawane, “Fabrication of Novel NFA-SiC Composites for Nuclear
Applications,” AFC Integration Meeting, Oak Ridge, TN, March 28-30, 2017.
26. K. Lu, “Polymer Derived Ceramics and a World of Possibilities on Research, Education,
and Friendship,” Humboldt Colloquium: Global Research in the 21st Century: Perspectives
of the U.S. Humboldt Network, Washington D.C., March 2-4, 2017.
25. K. Lu, “Material Needs and Developments in Energy Conversion, Harvesting, and Storage,”
Fifth Biennial Conference of the Combined Australian Materials Societies 2016, Melbourne,
Australia, December 6-8, 2016 (Keynote).
24. K. Lu, “Understanding Current State of Materials Education for a Successful Career
Tomorrow,” Materials Science & Technology 2016, Salt Lake City, UT, October 23-27,
2016.
23. K. Lu, K. Shen, “Study of Cathodes and Interconnect Coatings for Solid Oxide Fuel Cells,”
Materials Day Symposium-Ceramics for Energy, Darmstadt, Germany, April 29, 2016.
22. K. Lu, K. Shen, “Perovskite-type Cathode Materials and Coatings for Solid Oxide Fuel
Cells,” 2016 145th TMS Annual Meeting & Exhibition, Nashville, TN, February 14-18,
2016.
21. K. Lu, “FIB Guided Anodization Patterning, Morphology Control, and Feature Array
Transfer,” University of North Carolina, Charlotte, 2/17/2016-2/18/2016.
22. K. Lu, “Growing Materials Education Diversity for a Successful Career Tomorrow,”
Materials Science and Engineering 2015 Conference, Columbus, OH, October 4-8, 2015.
20. K. Lu, Z. Tang, Z. Hu, “Silicon Carbide and Oxide Dispersion Strengthened Steel Cladding
Materials for Nuclear Applications,” Materials Science and Engineering 2015 Conference,
Columbus, OH, October 4-8, 2015.
19. F. Shen, K. Lu, “Properties of Electrodeposition Co and Electrophoresis Sm0.2Ce0.8O1.9
Protective Layer on AISI 441 for Solid Oxide Fuel Cells,” Materials Science and
Engineering 2015 Conference, Columbus, OH, October 4-8, 2015.
18. K. Lu, K. Shen, “Study of Different New Cathode Materials and Electrocatalyst
Incorporation in Solid Oxide Fuel Cells,” The 11th International Conference of Pacific Rim
Ceramic Societies (PacRim-11), Jeju Island, South Korea, August 30-September 4, 2015.
17. K. Lu, F. Shen, “(La0.6Sr0.4)xCo0.2Fe0.8O3 and Related Cathode Materials in Solid Oxide Fuel
Cells,” 2015 TMS 144th Annual Meeting & Exhibition, Walt Disney World, Orlando, FL,
March 15-19, 2015.
16. K. Lu, “3D Microstructure Characterization of Nanoparticle-based Material Sintering,” the
International Conference on Sintering 2014, Dresden, Germany, August 24-28, 2014
(Keynote).
15. K. Lu, “Patterning, Morphology Control, and Feature Array Transfer through Focused Ion
Beam Guided Anodization,” University of Virginia, Charlottesville, VA, April 14, 2014.
14. K. Lu, M. Gervasio, “Formation and Characterization of Nanoparticle based Sub-micron
Structures,” 38th International Conference and Expo on Advanced Ceramics and
Composites, Daytona Beach, FL, January 26-31, 2014.
13. K. Lu, W. Li, “Different Cathode Interactions and Performance Behaviors in Solid Oxide
Fuel Cells,” 10th Pacific Rim Conference on Ceramic and Glass Technology, San Diego,
California, June 2-7, 2013.
12. K. Lu, “Development of a Nanoparticle-based Surface Templating Approach,” 12th
International Conference on Ceramic Processing Science, Portland, Oregon, August 4-7,
2013.
11. K. Lu, “Material Uses and Challenges in Solid Oxide Fuel Cells,” Departmental seminar at
Technische Universität Darmstadt, Darmstadt, Germany, November 2012.
10. K. Lu, B. Chen, K. Ramsburg, “ZnO Nanoparticle-based Surface Templating,” 36th
International Conference and Expo on Advanced Ceramics and Composites, Daytona Beach,
Florida, January 22-27, 2012.
9. K. Lu, T. Jin, “Interactions of Electrolyte-(La0.8Sr0.2)xMnO3 Air Electrode Interconnect Tri-
layers for Solid Oxide Fuel Cells,” 36th International Conference and Expo on Advanced
Ceramics and Composites, Daytona Beach, Florida, January 22-27, 2012.
8. K. Lu, W. Li, J. Walz, “Understanding of Silica-Kaolinite Composite Sintering,” Materials
Science & Technology 2011 Conference and Exhibit (MS&T '11), Columbus, OH, October
16-20, 2011.
7. K. Lu, B. Chen, Z. Tian, “Understanding Effect of Surface Morphology during Focused Ion
Beam Guided Anodization,” 35th International Conference & Exposition on Advanced
Ceramics & Composites, Daytona Beach, FL, January 23-28, 2011,.
6. K. Lu, “Search and Study of a Solid Oxide Fuel Cell Seal Material,” 2011 TMS Annual
Meeting & Exhibition, San Diego, CA, February 27-March 3, 2011.
5. K. Lu, “Nanoparticle-Based Material Processing and Templating,” Ohio State University,
Columbus, OH, May 22, 2009.
4. K. Lu, “Energy and Nanoscale Materials,” University of Maryland at Baltimore County,
Baltimore, MD, May 9, 2008.
3. K. Lu, “Correlating Microscopic and Macroscopic Aspects in Solid-State Sintering,” Extrude
Hone Corporation, Irwin, PA, November 30, 2004.
2. K. Lu, “Particle Packing, Strength Evolution, and Densification in Solid-State Sintering,”
Naval Research Laboratory, Arlington, VA, October 22, 2004.
1. K. Lu, “Battery Research and Technology,” Advanced Materials Laboratory at Sandia
National Lab, March 15, 2004.