PRODUCTS & SERVICES - BuildSite...ASTM A354 – Grade BC SAE J429 – Grade 8.2 ASTM A490 – Type 1 ASTM A490 – Type 2 ASTM A490 – Type 3 See 1, 2 Note 8 SAE J429 – Grade 8

PRODUCTS & SERVICES

INDUSTRIAL THREADED PRODUCTS, INC.®

1 (800) 976-Bolt

PRODUCTS & SERVICES

CORPORATE HEADQUARTERS13580 Firestone Blvd., Santa Fe Springs, CA 90670

(562) 802-4626 • (714) 521-5902 • Fax: (562) 802-4641

BRANCH SALES AND WAREHOUSES2641 Lindsay Privado Drive, Ontario, CA 91761

(909) 605-7743 • Fax: (909) 605-6743

4454 Viewridge Avenue, San Diego, CA 92123(619) 277-8477 • Fax (619) 277-8443

16701 Stagg Street “A”, Van Nuys, CA 91406(818) 786-0916 • Fax (818) 786-1620

25531 Whitesell Street, Hayward, CA 94545(800) 566-8831 • Fax (800) 646-4249

Email: [email protected] Website: www.ITPBolt.com

PAST PRESENT FUTURE

PAST: Founded October 4th 1979, by current president and C.E.O., RonaldFutrell. Mr. Futrell is active in all corporate and branch activities on a daily basis.For twenty straight years, Industrial Threaded Products has experienced a growthin sales volume over the preceding year.

PRESENT: Industrial Threaded Products is a direct importer/distributor of com-mercial/construction related fasteners covering a wide range of products andmaterials. ITP has five fully stocked sales office/warehouse locations. Each loca-tion is an independent marketing and shipping facility with its own fleet of trucks,sales agents and shipping/receiving personnel. Each warehouse is on-line, viaextensive computerized networking, with the other locations to utilize all of ourinventory.

Products and Guidelines: ITP imports standard fasteners for a vast range of stockitems, and we also have the ability to import standards and specials from offshorein larger quantities. Our unique “Hold for Release” program allows us to releaselarge mill purchases to our customers in monthly installments over a six monthperiod, thus guaranteeing inventory, quality, and price.

ITP has approximately 100,000 square feet of product in-house, available forimmediate shipment. As one of the largest fastener distributors in the WesternUnited States, we can ship most product off our shelf for same/next day delivery,if needed. Normal turn around is 2-3 days to your dock. Both, our importing anddistributing services, can be performed by each branch independently, or productcan be transferred immediately between branches by our unique and specializedinter-branch routing system.

ITP offers a fleet of trucks for our Northern and Southern California customers’service requirements. For our customers’ smaller requirements, UPS is available.And for those emergencies, when you find that your production line has just usedthat last fastener, your purchasing department will be relieved to know that weoffer a complete will call service at all five locations for your convenience.

Last but not least, our most valuable asset, far beyond our size of inventory, fleetof trucks, or vast domestic/import capabilities, is our people. Our combined salesstaff offers over 200 years of fastener experience. We’ve been at this a while, andwe’re more than ready to meet your needs.

FUTURE: Our goals are continued growth in sales volume. Expansion in the sizeand geographic area of our customer base. Additional stocking/sales locations foreven faster delivery. Extended inventory positions in depth and range. Increasedserviceability to all of our customers in percentage of fill rate and on time perfor-mance. Improve our personnel training and education to better assist with our cus-tomers’ needs. But our main goal is to increase the value of each dollar that you,our customer, spend with ITP.

BOLTS• BOLTS • 1 (800) 976-Bolt

Industrial Threaded Products, Inc.13580 Firestone Blvd., Santa Fe Springs, CA 90670 • (562) 802-4626 • (714) 521-5901 • Fax: (562) 802-4641

2641 Lindsay Privado Drive, Ontario, CA 91761 • (909) 923-6062 • Fax: (909) 923-606610969 Wheatlands Avenue “A”, Santee, CA 92071 • (619) 562-1161 • Fax (619) 562-1182

16701 Stagg Street “A”, Van Nuys, CA 91406 • (818) 786-0916 • Fax (818) 786-1620Email: [email protected] • Website: www.ITPBolt.com

Hex Cap Screws

Hex Head Tap Bolt

Carriage Bolt

No. 3 Plow Bolt

Heavy Hex Structural BoltsW/Nuts

Hex Lag Screw

Shaker Screen Bolt

Step Bolt

Flat Head Screw

Dome Head Plow Bolt

Elevator Bolt

Anchor Bolt

STANDARD BOLT LENGTHS

SIZE GRADE 2 GRADE 5 GRADE 8

1/4 - 20 1/2” to 8” 3/8” to 8” 1/2” to 8”

5/16 - 18 3/8” to 8” 3/8” to 8” 1/2” to 8”

3/8 - 16 1/2” to 12” 1/2” to 10” 1/2” to 8”

7/16 - 14 3/4” to 6” 3/4” to 10” 3/8” to 8”

1/2 - 13 1/2” to 24” 1/2” to 15” 3/4” to 15”

9/16 - 12 ---------- 1” to 15” 1” to 15”

5/8 - 11 1” to 24” 1” to 15” 1” to 15”

3/4 - 10 1” to 24” 1” to 15” 1” to 15”

7/8 - 9 1-1/4” to 24” 1-1/2” to 15” 1-1/2” to 15”

1 - 8 1-1/2” to 24” 1-1/2” to 15” 2” to 15”

1-1/8 - 7 2” to 24” 2” to 15” 2-1/2” to 16”

1-1/4 - 7 2-1/2” to 24” 2” to 15” 2-1/2” to 16”

1-3/8 - 6 ---------- ---------- 3” to 16”

1-1/2 - 6 3” to 24” 3” to 16” 4” to 16”

1-3/4 - 5 5” to 24” 5” to 16” 4” to 16”

2-4 1/2 8” to 24” 5” to 18” 4” to 16”

• MATERIALS •A307 • GRADE 5 • GRADE 8 • GRADE 9

A325 • A449 • A307B • B8 • B8MSTAINLESS STEEL • BRASS • BRONZE

NYLON • MONEL • ALUMINUMOTHER MATERIALS AVAILABLE UPON REQUEST

• PLATING •ZINC • CAD • NICKEL • BRASS

CHROME • BLACK OXIDEHOT DIP GALVANIZED

OTHER PLATINGS AVAILABLEUPON REQUEST

1

FASTENER IDENTIFICATION MARKING• FASTENER IDENTIFICATION MARKING • Grade

IdentificationMarking

Specification Material Nominal SizeIn.

ProofLoad

Stressksi

TensileStrength

Minksi

HardnessRockwell

Min Max

SeeNote

SAE J429 – Grade 1


ASTM A307 – Grade A

ASTM A307 – Grade B

SAE J429 – Grade 5ASTM A449 – Type 1

ASTM A449 – Type 1

SAE J429 – Grade 5.1






ASTM A354 – Grade BC





See 1, 2Note8


ASTM A354 – Grade BD

Low or MediumCarbon Steel

Medium Carbon Steel,Quenched and

Tempered

Low or Medium CarbonSteel, Quenched and

Tempered

Low Carbon MartensiteSteel, Quenched and

Tempered

Medium Carbon Steel,Quenched and

Tempered

Low Carbon MartensiteSteel, Quenched and

Tempered

Atmospheric CorrosionResistant Steel,Quenched and

Tempered

Medium CarbonAlloy Steel

Quenched andTempered

Medium CarbonAlloy Steel, Quenched

and Tempered

Low Carbon MartensiteSteel, Quenched

and Tempered

Medium Carbon AlloySteel, Quenched

and Tempered

Low Carbon MartensiteSteel, Quenched

and Tempered

Atmospheric CorrosionResistant Steel,Quenched and

Tempered

1/4 thru 11/2 33 60 B70 B1001/4 thru 3/4 55 74 B80 B100

over 3/4 thru 11/2 33 60 B70 B1001/4 thru 4 — 60 B69 B100

60 min1/4 thru 4 — 100 max B69 B95

1/4 thru 1 85 120 C25 C34over 1 thru 11/2 74 105 C19 C30

over 11/2 thru 3 55 90 183 235 3

No. 6 thru 1/2 85 120 C25 C40 4

C26 C361/4 thru 1 85 120 C25 C34

5

1/2 thru 1 85 120 C24 C35

over 1 to 11/2 74 105 C19 C31

6

1/4 thru 21/2 105 125 C26 C36over 21/4 thru 4 95 115 C22 C33

1/4 thru 11/2 120 150 C33 C39

1/4 thru 21/2 120 150 C33 C397over 21/2 thru 4 105 140 C31 C39

1/4 thru 1 120 150 C33 C39

150 min1/2 thru 11/2 120 C33 C38170 max

150 min1/2 thru 1 120 C33 C38170 max

150 min1/2 thru 11/2 120 C33 C38 6170 max

NO MARK

UPON REQUESTComplete Physical & Chemical Documentation Including

Heat & Lot Numbers

2



16701 Stagg Street “A”, Van Nuys, CA 91406 • (818) 786-0916 • Fax (818) 786-162025531 Whitesell St., Hayward, CA 94545 • (800) 566-8831 • Fax (800) 646-4249

Email: [email protected] • Website: www.ITPBolt.com

NUTS• NUTS • 1 (800) 976-Bolt

• MATERIALS •GRADE 2 • GRADE 5 • GRADE 8 • GRADE 9

STAINLESS STEEL • BRASS • BRONZENYLON • MONEL • ALUMINUM • B8 • B8M

OTHER MATERIALS AVAILABLE UPON REQUEST

• PLATING •ZINC • CAD • NICKEL

CHROME • BLACK OXIDEHOT DIPPED GALVANIZED

OTHER PLATINGS AVAILABLE UPON REQUEST

Finished Hex Nut

Finished Hex NutGrade 8

Hex Flange Lock Nut

Hex Jam Nut

Hi Nut

ASTM A-194 GR. 2-HHeavy Hex Nut

Castle Nut

ASTM A-325Heavy Hex Nut

Slotted Hex Nut

Keps Lock Nut

Heavy Hex Nut

Grade C, All MetalLock Nut

Cap Nut

Hex Coupling Nut

Nylon Insert

Tee Nut

FlexLock Nut

2-Way Lock Nut

Square Nut

Wing Nut



16701 Stagg Street “A”, Van Nuys, CA 91406 • (818) 786-0916 • Fax (818) 786-1620Email: [email protected] • Website: www.ITPBolt.com 3

WASHERS• WASHERS • 1 (800) 976-Bolt

U.S.S. STANDARD FLAT

FENDER WASHER

S.A.E. STANDARD FLAT

BOLTSIZE

I.D.(inches)

A

O.D.(inches)

B

THICKNESSGAUGE

C

APPROXNO. IN

100 LBS

BOLTSIZE

I.D.(inches)

A

O.D.(inches)

B

THICKNESSGAUGE

C

APPROXNET WT.

LBS. PERM PCS.

APPROX.NET WT.

LBS. PERM PCS.

APPROX.NO. IN

100 LBS.

BOLTSIZE

I.D.(inches)

A

O.D.(inches)

B

THICK-N E S SGAUGE

3/16 1/4 9/16 18 (3/64) 36,2001/4 5/16 3/4 16 (1/16) 14,9005/16 3/8 7/8 14 (5/64) 9,0003/8 7/16 1 14 (5/64) 6,7007/16 1/2 1-1/4 14 (5/64) 4,1001/2 9/16 1-3/8 12 (7/64) 2,6009/16 5/8 1-1/2 12 (7/64) 2,2005/8 11/16 1-3/4 10 (9/64) 1,3003/4 13/16 2 9 (5/32) 9107/8 15/16 2-1/4 8 (11/64) 6501 1-1/16 2-1/2 8 (11/64) 530

1-1/8 1-1/4 2-3/4 8 (11/64) 4501-1/4 1-3/8 3 8 (11/64) 3801-3/8 1-1/2 3-1/4 7 (3/16) 3001-1/2 1-5/8 3-1/2 7 (3/16) 2601-5/8 1-3/4 3-3/4 7 (3/16) 2301-3/4 1-7/8 4 7 (3/16) 2001-7/8 2 4-1/4 7 (3/16) 176

2 2-1/8 4-1/2 7 (3/16) 1592-1/4 2-3/8 4-3/4 5 (7/32) 1212-1/2 2-5/8 5 4 (15/64) 1042-3/4 2-7/8 5-1/4 3 (1/4) 91

3 3-1/8 5-1/2 2 (17/64) 77

Steel Square Plate Bonded NeopreneSealing Washer

BevelWasher

A325/A490HardenedWasher

FinishWasher

Load IndicatingWasher

Flat Back

3 in 1 PatternMalleable Round Type

6 (1/8) 5/32 3/8 18 (3/64) 79,000 1.26

8 (5/32) 3/16 7/16 18 (3/64) 58,500 1.7

10 (3/16) 7/32 1/2 18 (3/64) 43,500 2.3

12 (7/32) 1/4 9/16 18 (3/64) 36,200 2.8

1/4 9/32 5/8 16 (1/16) 22,200 4.5

5/16 11/32 11/16 16 (1/16) 19,200 5.2

3/8 13/32 13/16 16 (1/16) 14,000 7.2

7/16 15/32 59/64 16 (1/16) 10,500 9.5

1/2 17/32 1-1/16 13 (3/32) 5,500 18.3

9/16 19/32 1-3/16 13 (3/32) 4,300 23.4

5/8 21/32 1-5/16 13 (3/32) 3,600 27.7

3/4 13/16 1-1/2 10 (9/64) 2,100 47.4

7/8 15/16 1-3/4 10 (9/64) 1,600 63.0

1 1-1/16 2 10 (9/64) 1,200 83.0

1-1/8 1-3/16 2-1/4 10 (9/64) 920 109.0

1-1/4 1-5/16 2-1/2 9 (5/32) 630 160.0

1-3/8 1-7/16 2-3/4 9 (5/32) 525 190.0

1-1/2 1-9/16 3 9 (5/32) 425 240.0

3/16 7/32 1-1/8 .051/.067 16.33/16 7/32 1-1/4 .051/.067 19.81/4 9/32 1 .051/.067 12.21/4 17/64 1-1/8 .051/.067 15.71/4 9/32 1-1/4 .051/.067 19.81/4 5/16 1-1/4 .051/.067 18.61/4 9/32 1-1/2 .051/.067 29.05/16 3/8 1-1/4 .044/.055 15.25/16 11/32 1-1/4 .051/.067 18.35/16 11/32 1-1/2 .051/.067 29.73/8 25/64 1-1/2 .051/.067 28.03/8 13/32 1-1/2 .051/.067 27.81/2 17/32 1-1/2 .051/.067 26.31/2 17/32 2 .051/.067 44.8

• MATERIALS •STEEL • STAINLESS

BRASS • BRONZE • MONELALUMINUM • A325 • A490

NEOPRENE • NYLON • FIBER

• PLATINGS •ZINC • CAD • NICKELBRASS • CHROME •

BLACK OXIDE •HOT DIPPED GALVANIZED



16701 Stagg Street “A”, Van Nuys, CA 91406 • (818) 786-0916 • Fax (818) 786-1620Email: [email protected] • Website: www.ITPBolt.com4

LOCK WASHERS• LOCK WASHERS • 1 (800) 976-Bolt

REGULAR (MEDIUM)

• MATERIALS •STAINLESS STEEL • BRASS

BRONZE • MONEL

• PLATING •ZINC • CAD • NICKEL • BRASS • CHROME •HOT DIPPED GALVANIZED • BLACK OXIDE

Split SpringLockwasher

InternalLockwasher

ExternalLockwasher

Internal/ExternalLockwasher

External CountersunkLockwasher

EXTERNAL TOOTH STANDARD

INTERNAL TOOTH STANDARD

Hi-Collar Helical Spring Lock Washers

NominalWasher

Size

A B W

Width ThicknessWasher Section

T+ I2

InsideDiameter

OutsideDiameter

Min. Max. Max. Min. Min.

4 0.112 0.115 0.121 0.173 0.022 0.0226 0.138 0.141 0.148 0.216 0.030 0.0308 0.164 0.168 0.175 0.267 0.042 0.047

10 0.190 0.194 0.202 0.294 0.042 0.0471/4 0.250 0.255 0.263 0.365 0.047 0.0785/16 0.312 0.318 0.238 0.460 0.062 0.0933/8 0.375 0.382 0.393 0.533 0.076 0.125

NominalWasher

Size

A B W

Width Thickness

Washer Section

T+ I2

InsideDiameter

OutsideDiameter

Min. Max. Max. Min. Min.No. 20.086 0.088 0.094 0.172 0.035 0.020

3 0.099 0.101 0.107 0.195 0.040 0.0254 0.112 0.115 0.121 0.209 0.040 0.0255 0.125 0.128 0.134 0.236 0.047 0.0316 0.138 0.141 0.148 0.250 0.047 0.0318 0.164 0.168 0.175 0.293 0.055 0.040

10 0.190 0.194 0.202 0.334 0.062 0.04712 0.216 0.221 0.229 0.377 0.070 0.056

1/4 0.250 0.255 0.263 0.489 0.109 0.0625/16 0.312 0.318 0.328 0.586 0.125 0.0783/8 0.375 0.382 0.393 0.683 0.141 0.0947/16 0.438 0.446 0.459 0.779 0.156 0.1091/2 0.500 0.509 0.523 0.873 0.171 0.1259/16 0.562 0.572 0.587 0.971 0.188 0.1415/8 0.625 0.636 0.653 1.079 0.203 0.15611/16 0.688 0.700 0.718 1.176 0.219 0.1723/4 0.750 0.763 0.783 1.271 0.234 0.18813/16 0.812 0.826 0.847 1.367 0.250 0.2037/8 0.875 0.890 0.912 1.464 0.266 0.21915/16 0.938 0.954 0.978 1.560 0.281 0.234

1 1.000 1.017 1.042 1.661 0.297 0.2501-1/16 1.062 1.080 1.107 1.756 0.312 0.2661-1/8 1.125 1.144 1.172 1.853 0.328 0.2811-3/16 1.188 1.208 1.237 1.950 0.344 0.2971-1/4 1.250 1.271 1.302 2.045 0.359 0.3121-5/16 1.312 1.334 1.366 2.141 0.375 0.3281-3/8 1.375 1.398 1.432 2.239 0.391 0.3441-7/16 1.438 1.462 1.497 2.334 0.406 0.3591-1/2 1.500 1.525 1.561 2.430 0.422 0.375

S C R EW

P A R TN O .

O U T-SIDE S T O

PRICES PER M PIECES

5 1 0 2 5 5 0 1 0 0 2 5 0 ZINC

2 EX2-00 .270-.280 017 4.25 3.80 3.50 3.21 2.99 2.49 .154 EX4-00 .270-.280 015 2.50 1.75 1.50 1.01 .95 .92 .185 EX5-00 .270-.280 015 2.75 1.90 1.75 1.40 1.30 1.20 .186 EX6-00 .305-.320 015 2.00 1.75 1.45 1.01 .98 .95 .188 EX8-00 .365-.381 020 2.02 1.77 1.47 1.02 .99 .97 .23

10 EX10-00 .395-.410 022 2.10 1.57 1.47 1.29 1.25 1.20 .3512 EX12-00 .460-.475 025 4.50 3.25 2.50 2.03 1.99 1.89 .501/4 EX14-00 .494-.510 025 4.50 3.25 2.50 2.03 2.01 1.99 .505/16 EX18-00 .588-.610 030 7.00 5.49 3.49 3.29 3.19 2.99 1.003/8 EX20-00 .670-.694 035 6.90 5.58 4.59 4.49 4.39 4.29 1.107/16 EX22-00 .740-.760 035 11.90 8.59 7.99 6.49 5.99 5.72 1.201/2 EX24-00 .880-.900 040 10.49 9.99 9.49 8.89 8.09 7.89 1.309/16 EX26-00 .960-.985 040 18.75 15.49 12.99 12.59 11.99 10.50 1.405/8 EX28-00 1.045-1.070 045 20.50 18.49 17.99 16.49 15.49 13.99 1.503/4 EX32-00 1.220-1.260 050 36.10 27.20 25.28 24.10 21.50 19.80 2.807/8 EX34-00 1.380-1.470 055 43.50 39.10 38.10 34.50 32.98 30.94 3.501” EX36-00 1.590-1.620 062 60.00 54.50 49.90 45.50 43.80 42.80 4.00

S C R EW

P A R TN O .

O U T S I D E S T OPRICES PER M PIECES

5 1 0 2 5 5 0 1 0 0 2 5 0 ZINC

2 IN200 .175-.200 012 4.50 3.80 3.50 3.21 2.99 2.49 .153 IN300 .215-.252 016 4.50 2.99 2.49 2.29 2.19 1.99 .154 IN400 .255-.270 016 2.50 1.75 1.50 1.29 .99 .91 .185 IN500 .245-.280 018 2.75 2.10 1.90 1.75 1.40 1.30 .186 IN600 .275-.295 018 1.99 1.75 1.45 1.11 1.03 .99 .208 IN800 .325-.340 020 2.09 1.89 1.49 1.13 1.05 1.01 .24

10 IN1000 .365-.381 021 2.25 1.97 1.47 1.29 1.25 1.20 .3512 IN1200 .394-.410 022 4.15 3.25 2.50 2.03 1.99 1.89 .501/4 IN1400 .460-.478 025 4.15 3.30 2.69 2.13 2.06 1.99 .505/16 IN1800 .594-.610 030 7.00 5.49 3.49 3.29 3.19 2.99 1.003/8 IN2000 .670-.692 035 6.90 5.58 4.59 4.49 4.39 4.29 1.107/16 IN2200 .740-.789 035 11.90 9.59 7.99 6.49 5.99 5.72 1.201/2 IN2400 .867-.900 040 10.99 9.99 9.49 8.89 8.09 7.89 1.309/16 IN2600 .957-.985 040 18.75 15.49 12.99 12.59 11.99 10.50 1.405/8 IN2800 1.045-1.071 045 23.00 21.50 18.49 17.59 16.49 13.99 1.503/4 IN3200 1.220-1.245 050 26.99 25.99 24.99 23.99 21.99 21.00 2.00

1/7/8 IN3400 1.364-1.470 055 41.50 39.10 38.10 35.50 32.98 30.99 3.501” IN3600 1.590-1.637 062 54.90 49.90 45.99 43.97 42.99 42.49 4.00




SCREWS• SCREWS • 1 (800) 976-Bolt

TAPPING

Hex Washer Head

Pan

Oval

Flat Type B

Flat

Round

Truss

Pan Type B

Pan Framing K-Lath

Coarse Thread Trim Head

Phillips Bugle HeadScrew Laminating

Flat

Round

Oval

SELF DRILLING TEKS®

Hex Washer Head

Hex WasherHead Sealing

PhillipsPan Framing

PhillipsTrim Head

Phillips Bugle

Phillips Pan

Phillips Wafer

Phillips Oval

PhillipsRound Washer

WOOD

DRYWALL

POINTS

• MATERIALS •STEEL • STAINLESS STEEL • BRASS

BRONZE • MONEL • ALUMINUMOTHER MATERIALS AVAILABLE UPON REQUEST


CHROME • BLACK OXIDEOTHER PLATINGS AVAILABLE UPON REQUEST




SCREWS• SCREWS • 1 (800) 976-Bolt

• MATERIALS •STEEL • STAINLESS STEEL • BRASS

BRONZE • MONEL • ALUMINUMOTHER MATERIALS AVAILABLE UPON REQUEST


CHROME • BLACK OXIDEOTHER PLATINGS AVAILABLE UPON REQUEST

Machine Screws Thread Cutting Screws

Thread Rolling Screws Sems Screws

PanheadType “F”

Pan HeadType 1

Pan headType 23

Pan headType 25

Hex Washer HeadType “F”

Flat HeadType “F”

Flat HeadType 1

Flat HeadType 23

Flat HeadType 25

Hex Washer HeadType 1



Pan Head

Flat Head

Oval Head

Ind Hex Head

Binding Head

Truss Head

Flat Head Undercut

Round Head

Ind Hex Washer Head

Fillister Head

Pan Head

Slotted Hex Washer Head

Flat Head Pan HeadExternal Sems

Pan HeadFlat Washer Sems

Pan HeadInternal Sems

Pan HeadSplit Lock Washer SemsHex Washer Head




HEAD STYLES

SOCKET PRODUCTS• SOCKET PRODUCTS • 1 (800) 976-Bolt

• MATERIALS •ALLOY • STAINLESS STEELBRASS • NYLON • MONEL

• PLATING •ZINC • CAD • BLACK OXIDE

OTHER PLATINGS AVAILABLE UPON REQUEST

SOCKET SCREWS SOCKET SET SCREWS

Socket Products Hex Keys

Dowel Pin

Dry Seal Pipe Plug

Tamper Proof Hex Key

Flush Seal Pipe Plug

Socket Head

Socket Shoulder

Button HeadTamper Proof

Flat Head

Cup Point

Half Dog Point

Flat Point

Slotted Set

Cone Point

Full Dog Point

Oval Point

Square Head

Button Head

Flat HeadTamper Proof

Size Short Arm Pkg. Qty. Long Arm Pkg. Qty.

.028 4.99 100

.038 4.25 100

.050 1.93 100 3.271/16 1.98 100 2.79 1005/64 2.10 100 2.96 1003/32 2.26 100 3.49 1007/64 2.36 100 3.70 1001/8 2.63 100 4.89 1009/64 3.44 100 5.75 1005/32 4.51 100 7.30 1003/16 5.91 100 9.29 1007/32 8.16 50 13.27 501/4 12.36 50 18.69 505/16 20.84 50 32.01 503/8 33.25 25 48.88 257/16 61.87 10 90.77 101/2 73.26 10 114.40 109/16 118.16 10 168.64 105/8 151.46 10 236.36 53/4 243.83 10 366.29 BULK7/8 352.32 BULK 547.82 BULK

1 484.44 BULK 891.54 BULK




FITTINGS• FITTINGS • 1 (800) 976-Bolt

THREAD SPECIFICATIONS

O.D. TUBE SIZE

TYPE FITTING 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1

45o Flare 5/16x24 2/8x24 7/16x20 1/2x20 5/8x18 11/16x16 3/4x16 7/8x14 1-1/16x14 1-1/4x12 1-3/8x12

Compression/A-Lign 5/16x24 3/8x24 7/16x24 1/2x24 9/16x24 5/8x24 11/16x20 13/16x18 1x18 1-1/8x18

Inverted Flare 5/16x28 3/8x24 7/16x24 1/2x20 5/8x18 11/16x18 3/4x18 7/8x18 1-1/16x16

Double Compression 5/16x24 3/8x24 7/16x24 1/2x20 9/16x20 5/8x18 11/16x16 7/8x18

Poly-Fit 5/16x24 3/8x24 3/8x24 7/16x24 1/2xx24 11/16x20

Air Brake 7/16x24 17/32x24 11/16x20 13/16x18 1x18

Pipe 1/8x27 1/4x18 3/8x18 1/2x14 3/4x14 1x11-1/2

• MATERIALS •BRASS • STAINLESS STEEL

MALLEABLE IRON • HOT DIPPED GALVANIZED

Nipple

Adapter

Street Elbow

Coupling

Flared End Tee

Connector

Hose Barb

Elbow

Female Tee

Compression Tee

Hex Head Plug Solid

Square Head Plug Solid

Countersunk Plug

Cap

Hex Head Plug Cored

Square Head Plug Cored

Sleeve

Lock Nut




BUSHINGS• BUSHINGS • 1 (800) 976-Bolt

ALL AMERICAN& ANSI STANDARDS

NUTS SPRING PLUNGERS

PADS FOR SWIVEL SCREWS

BOLTS

WASHERS

BALL LOCK PINS

DRILL BUSHINGS FORSPECIAL APPLICATIONS

Type “P”

Type “SF”

Type “H” Type “DG”

Type “SP”

Extended Range

Uni-Lok

Swivel TypeCollar Nut

Knurled Lock Nut

SphericalWasher Sets

C-Washers

Flange

T-Slot Nut

Flat Washers

SwingC-Washers

T Handle

Button Handle

L Handle

Ring Handle

Large Pads

Ball Pads

Small Pads

V-Pads

Steel Nose - BlackStandard End Pressure

Nylon Nose - BlackStandard End Pressure

Spring Plunger Wrench

ShoulderEyebolts

T-Slot Bolts

Tooling Eyebolts

Swing Bolts

Type “F”




ANCHORS• ANCHORS • 1 (800) 976-Bolt

• MATERIALS •STEEL • 304SS • 316SS

• PLATING •ZINC • HOT DIP GALVANIZED

INSTALLATION STEPS

1.Using a bit whose diameter equals the anchor diameter, drill hole to any depth exceeding minimum embedment.Clean hole.

2.Assemble anchor with nut andwasher so that the top of the nut isflush with the top of the anchor.Drive anchor through material to befastened so that nut and washer isflush with surface of material.

3.Expand anchor by tightening nut 3 to 5 turns, or to the specified torquerequirement.

Industrial Threaded Products is a full line stocking distributor for Ankr-Tite/Wej-It& Ramset/Red Head concrete fastening systems. Call for all of your anchor needs.




Wedge Anchors Drop in Anchors

Sleeve Anchors Stud Anchors

Drive nail Epoxy capsule

RIVETS• RIVETS • 1 (800) 976-Bolt

Materials & Platings: Aluminum Rivet/Aluminum Mandrel Plated Steel Rivet/Coated Steel MandrelAluminum Rivet/Coated Steel Mandrel Stainless Steel Rivet/Coated Steel MandrelCopper Rivet/Copper Plated Steel Mandrel Stainless Steel Rivet/Stainless Steel Mandrel

SOLID RIVETS

Drive Rivet Round Head ModifiedBrazier

Brazier Flat Head 100 C’Sunk Universal




ACTUAL SIZE RIVET CHART

METRIC• METRIC • 1 (800) 976-Bolt

4.8 340 420 145 49300 609005.8 ref. Gr. 2 420 520 145 60900 754008.8 up to above M16 ref. Gr. 5 640 800 145 92800 116000

660 830 145 95700 1203509.8 above Gr. 5 720 900 145 104400 13050010.9 ref. Gr.8 940 1040 145 136300 15080012.9 ref. ASTM A574 1100 1220 145 159500 176900

Property classes for metric fasteners

class equivalentto

min. yieldstrength

MPa = N/mm2

min. tensilestrength

MPa = N/mm2

conversionfactor

min. yieldstrength

PSI

min. tensilestrength

PSI

THREADSmetricmm

inchapprox.

Pitchmm

1 000-120 0.251.2 00-90 0.251.4 0-801) 0.31.6 1-64 0.351.8 1-64 0.352 2-56 0.42.2 2-56 0.452.5 3-48 0.452.6 3-48 0.453 4-40 0.53.5 6-32 0.64 8-32 0.75 10-24 0.86 1/4” 17 9/32” 18 5/16” 1.25

10 3/8” 1.512 1/2” 1.7514 9/16” 216 5/8” 218 11/16” 2.520 3/4” 2.522 7/8” 2.524 1” 327 11/16” 330 13/16” 3.533 15/16” 3.536 17/16” 439 11/2” 442 15/8” 4.545 13/4” 4.548 17/8” 5

LENGTHmetricmm

inchapprox.

metricmm

inchapprox.

1 3/64” 90 31/2”1.5 1/16” 100 4”2 5/64” 110 43/8”3 1/8” 120 43/4”4 5/32” 130 5”5 3/16” 140 51/2”6 1/4” 150 6”8 5/16” 160 61/4”

10 3/8” 170 63/4”12 1/2” 180 7”14 9/16” 190 71/2”16 5/8” 200 8”18 11/16” 220 83/4”19 3/4” 240 99/16”20 3/4” 260 101/4”25 1” 270 102/4”30 13/16” 280 11”35 13/8” 300 12”40 19/16” 320 121/2”45 13/4” 340 131/2”50 2” 360 141/4”55 23/16” 380 15”60 23/8” 400 153/4”65 29/16” 420 161/2”70 23/4” 440 173/8”75 3” 460 18”80 33/16” 480 19”85 33/8” 500 20”

DIN




ALL THREAD ROD• ALL THREAD ROD • 1 (800) 976-Bolt

BENT BOLTS• BENT BOLTS •

• MATERIALS •A-36 STEEL • 18-8 STAINLESS

316 STAINLESS • B-7 • B-16OTHER MATERIALS UPON REQUEST

• FULL LINE STOCKING DISTRIBUTOR •One of the Largest Inventories on the West Coast.

3’-6’-10’-12’ All Thread in Stock for Immediate Shipment.Double End-Cut to Length

HOOK ORANCHOR

BOLTRIGHT ANGLE

BEND

ROUND BENDHOOK BOLT

SQUARE BENDHOOK BOLT

ROUND BENDU BOLT

J BOLT

SQUARE BENDU BOLT

OPENEYE BOLT

SPECIALHOOK BOLT

CLOSEDEYE BOLT

• PLATINGS •ZINC • CAD

HOT DIPPED GALVANIZEDOTHER PLATINGS UPON REQUEST




FLANGE KITS• FLANGE KITS • 1 (800) 976-Bolt

Gaskets• Gaskets •

150# FLANGE KIT 300# FLANGE KIT

SIZE PCS BOLT SIZE

2” 4 5/8-11 x 2 1/23” 4 5/8-11 x 2 1/24” 8 5/8-11 x 35” 8 3/4-10 x 36” 8 3/4-10 x 3 1/48” 8 3/4-10 x 3 1/210” 12 7/8-9 x 3 3/412” 12 7/8-9 x 3 3/414” 12 1-8 x 4 1/216” 16 1-8 x 4 1/218” 16 1 1/8-7 x 520” 20 1 1/8-7 x 524” 20 1 1/4-7 x 5 1/230” 28 1 1/4-7 x 636” 32 1 1/2-6 x 742” 36 1 1/2-6 x 7 1/2

• All kits are boxed or bagged upon request.• Each kit is labeled per customer specification.• All special kits made to order.• Custom labeling to your specification

Materials Include:A307 Grade A & B

T304 and T316 Stainless Steel • Brass • BronzePlain Steel • Plated or Galvanized

SIZE PCS BOLT SIZE

2” 8 5/8-11 x 33” 8 3/4-10 x 3 1/44” 8 3/4-10 x 3 1/25” 8 3/4-10 x 46” 12 3/4-10 x 4 1/28” 12 7/8-9 x 4 1/210” 16 1-8 x 5 1/212” 16 1 1/8 - 7 x 614” 20 1 1/8-7 x 616” 20 1 1/4-7 x 6 1/218” 24 1 1/4-7 x 720” 24 1 1/4-7 x 724” 24 1 1/2-6 x 830” 30 1 3/4-5 x 1036” 32 2-4 1/2 x 1242” 36 3-4 x 14

ITP Also Stocks For Immediate ShipmentBreak-Off Bolts • Angle Eye Bolts • All Thread Rod • Studs

Meter Bolts • All Materials and Finishes • Insulation Kits

300 LB. RING 300 LB. FULL FACE 150 LB. FULL FACE




ITP Also Stocks A Full Line Of GasketsRing • Full Face • Asbestos • Red Rubber • Neoprene

Garlock 3000 • 1/16 - 1/8 - Thick

YOUR NAMEYOUR NAME6-8 150#6-8 150#

ZINC PLAZINC PLATEDTED

YOUR NAMEYOUR NAME6-8 150#6-8 150#

ZINC PLAZINC PLATEDTED

COMPLETE LINE OF FASTENERS • COMPLETE LINE OF FASTENERS •



16701 Stagg Street “A”, Van Nuys, CA 91406 • (818) 786-0916 • Fax (818) 786-1620Email: [email protected] • Website: www.ITPBolt.com

U-BOLTS

FORGED EYE NUTS

FORGED EYE BOLTS

FORGED SHACKLES

FORGED YOKE ENDS

FORGED STEELTURNBUCKLES

TURNED EYE BOLTS

TURNED EYE BOLTS

WOODRRUFF KEYS

GREASE FITTINGS

SPRING LOCK PINS

SPLIT RINGS

RETAINING RING

“E” CLIPS

CLEVIS PINS

COTTERLESS PINS(Quick Release)

LYNCH PINS

HITCH PINS

COTTER PINS

HAIRPIN CLIPS

BRIDGE PINS

GROOVE PINS

CAGE NUT

FLAT TYPE

“J”TYPE

“U”TYPE

TAB WELD NUTS

WELD SCREWS

LAG SHIELD

PLASTIC ANCHOR

QUALITY BITS

DRILL BITS

WIRE TIES

16

SANTA FE SPRINGSCORPORATE HEADQUARTERS

1 (800) 976-Bolt

ONTARIO

VAN NUYS SAN DIEGO

HAYWARD

Visual Design & Advertising for Marketing

Marketing CommunicationsWebsite DevelopmentInteractive CD Design

Advertising DesignPackage DesignCatalog Design

PhotographyIllustration

In o u r 2 1 s t Y e a r!

[email protected] www.myriadnet.comvoice: 714.964.2389 fax: 714.962.1719

Huntington Beach, California USA

Online Catalogs created by

CoverCompany StoryBoltsFastener IdentificationNutsWashersLock WashersScrewsScrewsSocket ProductsFittingsBushingsAnchorsRivetsMetricAll Thread RodFlange Kits & GasketsComplete Line of FastenersBack CoverOnline Catalog Creator

Documents

PRODUCTS & SERVICES - BuildSite...ASTM A354 – Grade BC SAE J429 – Grade 8.2 ASTM A490 – Type 1 ASTM A490 – Type 2 ASTM A490 – Type 3 See 1, 2 Note 8 SAE J429 – Grade 8