Products Guide - BaudTecBackwards compatible with 802.11b/g z Support Wifi ON/OFF switch button z Support Wifi WPS switch button ... This IEEE 802.11n Wireless Hight Power AP Router

V10

010712F, No.181, Sec. 1, Tatung Rd., Hsichih City, Taipei Hsien 221,Taiwan, R.O.C.

TEL: 886-2-2643-8458 FAX: 886-2-2643-8459 E-mail:[email protected]

For information about products and prices

Sales Info-line :+886-2-2643-8458

[email protected]:

ProductsGuide

We Deliver

Excellent Product

Efficient Support

Eternal Service

WLAN Communications802.11n WLAN AP Router

802.11n WLAN USB Dongle802.11b/g WLAN AP Router

802.11b/g WLAN USB Dongle

WLAN ADSL2+ Router802.11n WLAN ADSL2+ Router

802.11b/g WLAN ADSL2+ Router

Wired ADSL2+ Router

ADSL USB Modem

PowerLine SeriesPowerLine WLAN ADSL2+ Router

200Mbps Powerline Ethernet Adapter200Mbps Powerline Ethernet AP Router

Switch Series5-Port 10/100/1000 Gigabit Ethernet Switch8-Port 10/100/1000 Gigabit Ethernet Switch

IAD SeriesSuperior IAD

Advance IAD with Host-USB interfaceOptimize IAD

Basic IAD

VoIP SeriesWLAN VoIP Gateway

VoIP ATAVoIP Phone

56K ModemPCI 56K V.92 ModemUSB 56K V.92 Modem

RS232 56K V.92 Modem

1131113

151519

23

29

31313335

373738

3939414345

47474951

53535455

Features IEEE 802.11n compliance. Backwards compatible

with 802.11b/g

Support Wifi ON/OFF switch button

Support Wifi WPS switch button

802.11n : Up to 150Mbps

Supports 802.11g data rates of up to 54 Mbps

Supports 802.11b data rates of up to 11 Mbps

Compliant transmit modulation accuracy and

transmit power spectral density

IEEE 802.11i Security supports 64/128-bits WEP,

WPA, WPA2, WPS and WDS

MAC Address Filter

Multi-SSID

IEEE 802.11e QoS enhancement (WMM)

RF Output Power 26dBm +/-1dBi for 802.11b

22dBm +/-1dBi for 802.11g

19dBm +/-1dBi for 802.11n

WAN IP Assignment Static IP

DHCP client

PPPoE client

Configuration Web Browser

Windows base Easy setup program

Operating Frequency /Channel USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz

Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz

Japan 14 channels: 2.412GHz ~ 2.484GHz

WAN Protocols /Interfaces Ethernet interface

Support 1 Port Ethernet Interface which compliant with

IEEE 802.3x standards.

10/100 Mbps auto selection

Ethernet port supports Automatic MDI/MDI-X

configuration transceiver.

LAN Protocols /Interfaces Ethernet interface

Support 4 Ports Ethernet Interface which compliant

with IEEE 802.3x standards.




Hardware interfaces 1 Power jack

1 Power switch for power on /off

1 Reset button for reset to factory default function

1 Ethernet jack for WAN port connection

4 Ethernet jack for LAN ports connection

1 External antenna

1 Wifi ON/OFF switch button

1 Wifi WPS switch button

802.11b/g/n WLAN High Power AP Router

802.11b/g/n WLAN High Power AP Router REI150R4-DT-1T1R

This IEEE 802.11n Wireless Hight Power AP Router is designed for

SOHO users. It allows users to enjoy wireless network and easy

wireless security connection.

01 02

REI150R4-DT-1T1R (Infinity)

n802.11

150Mbps 4-PortWPS WLAN

ON/OFF1T1R

REI150R4-DT-1T1R (Infinity)

g

k and easy

R (Infinity)REI150R4-DT-1T1R

802.118 1802.11888888

REI150R4-DT-1T1R (Elegant)

REI150R4-DT-1T1R (UFO)

* Detachable Antenna by optional.

Detachable Antenna

WLAN

Features IEEE 802.11n compliance. Backwards compatible

with 802.11b/g



802.11n : Up to 300Mbps (RE300R4 only)

802.11n : Up to 150Mbps (RE150R4 only)

Supports 802.11g data rates of up to 54 Mbps with

automatic fallback to 48, 36, 24,18, 12, 9, and 6

Mbps

Supports 802.11b data rates of up to 11 Mbps with

automatic fallback to 5.5, 2, and1 Mbps

Supports long and short preamble modes

Compliant transmit modulation accuracy and

transmit power spectral density


WPA, WPA2, WPS and WDS

MAC Address Filter

Multi-SSID



DHCP client

PPPoE client







Support 1 Port Ethernet Interface which compliant with






Support 4 Ports Ethernet Interface which compliant

with IEEE 802.3x standards.




USB Protocol /Interface (RE300R4H only) Support 1 port USB compliant USB 2.0 Host

SAMBA server application






1 USB 2.0 Host (RE300R4H only)

2 External antenna (RE300R4 only)

1 External antenna (RE150R4 only)



802.11b/g/n WLAN AP Router802.11b/g/n WLAN AP Router

RE150R4-1T1R / RE150R4-DT-1T1RRE300R4H-2T2R / RE300R4-2T2R / RE300R4-DT-2T2R

This IEEE 802.11n Wireless AP Router is designed for SOHO users.

It allows users to enjoy wireless network and easy wireless

security connection.

03 04

RE300R4-2T2R (Infinity)RE300R4-DT-2T2R (Infinity)

RE300R4 RE150R4 RE300R4 RE300R4HRE150R4

n802.11

300Mbps


ON/OFF2T2R 1T1R USB

Host

RE300R4H-2T2R (Infinity)

RE300R4-2T2R (Elegant)RE300R4-DT-2T2R (Elegant)

RE300R4-2T2R (UFO)RE300R4-DT-2T2R (UFO)

RE150R4-1T1R (Infinity)RE150R4-DT-1T1R (Infinity)

RE150R4-1T1R (Elegant)RE150R4-DT-1T1R (Elegant)

RE150R4-1T1R (UFO)RE150R4-DT-1T1R (UFO)

* Optional Detachable Antenna.

Detachable Antenna

WLAN

This RE300U IEEE 802.11n

(1Tx2R MIMO or 2Tx2R MIMO) Wireless USB2.0

Adapter is designed for SOHO users.

It allows users to enjoy wireless network

and easy wireless security connection.

Standard IEEE 802.11n compliance. Backwards compatible

with 802.11b/g

Data rate 802.11n : Up to 300Mbps (for RE300U-PA-2T2R)

802.11n (40MHz): Up to 150/300Mbps

(for RE300U-PA-1T2R)

802.11n (20MHz): Up to 75/150Mbps

(for RE300U-PA-1T2R)

802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps

802.11b: 11, 5.5, 2, 1Mbps







Standards supported IEEE 802.11e QoS enhancement (WMM)

IEEE 802.11i

Cisco Compatible Extensions (CCX4)

Security 64/128-bits WEP Encryption

WPA

WPA2

WPS

Interface USB 2.0 compatible

Environmental Specifications Operating Temperature: 0°C ~ 50°C

Humidity: 10% ~ 90% (non-condensing)

Certification CE, FCC P15, C-Tick, VCCI

RE300U-PA-2T2R

RE300U-PA-1T2R

300Mbps WPA WEP 100

Indoorm 300

OutdoormWPA2 USB

1T2R

2T2R

WPS

54Mbps

11Mbps

IEEE802.11n

IEEE802.11g

IEEE802.11b

IEEE802.11n PHY rate

300Mbps

nn802.11

802.11b/g/n WLAN USB Adapter


WLAN

RE300U-PA-2T2R / RE300U-PA-1T2R

05 06

150Mbps WPA WEPWPA2 USB1T1RWPS

Standard IEEE 802.11n Draft 2.0 compliance. Backwards

compatible with 802.11b/g

Data rate 802.11n : 150Mbps

802.11g : 54Mbps

802.11b : 11Mbps







Receiver Sensitivity 11b: -87dBm@11Mbps

11g: -74dBm@54Mbps

11n: -71dBm@HT20,MCS7, -66dBm@HT40,MCS7

Standards supported IEEE 802.11e QoS enhancement (WMM)

IEEE 802.11i

Cisco Compatible Extensions (CCX4)


WPA

WPA2

WPS


External Antenna




54Mbps

11Mbps

IEEE802.11n

IEEE802.11g

IEEE802.11b


150Mbps

Detachable Antenna

REI150U-DT-1T1R

This REI150U IEEE 802.11n (1Tx1R MIMO)

Wireless USB2.0 High Power Adapter is designed for

SOHO users. It allows users to enjoy wireless network


HighPower

802.11b/g/n WLAN USB High Power Adapter

802.11b/g/n WLAN USB High Power Adapter

WLAN

REI150U-DT-1T1R

07 08

150Mbps WPA WEP 100

Indoorm 300

OutdoormWPA2 USB1T1RWPS

This RE150U IEEE 802.11n

(1Tx1R MIMO) Wireless USB2.0 Adapter is

designed for SOHO users.

It allows users to enjoy wireless network


Standard IEEE 802.11n compliance. Backwards compatible

with 802.11b/g

Data rate 802.11n : Up to 150Mbps

802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps

802.11b: 11, 5.5, 2, 1Mbps







Standards supported• IEEE 802.11e QoS enhancement (WMM)

• IEEE 802.11i

• Cisco Compatible Extensions (CCX4)


WPA

WPA2

WPS


External Antenna




RE150U-DT-1T1R

RE150U-PA-1T1R

54Mbps

11Mbps

IEEE802.11n

IEEE802.11g

IEEE802.11b


150Mbps

Detachable Antenna



WLAN

RE150U-DT-1T1R / RE150U-PA-1T1R

09 10

RE150U-PA-1T1R

Wireless LAN 802.11B/G Support Wifi ON/OFF switch button


Fully integrated IEEE 802.11g-compliant MAC, baseband, and modem functions

Supports 802.11g data rates of up to 54 Mbps with automatic fallback to 48, 36,

24,18, 12, 9, and 6 Mbps

Supports 802.11b data rates of up to 11 Mbps with automatic fallback to 5.5, 2,

and1 Mbps

OFDM modulation with full-duplex MAC and half-duplex baseband

DBPSK, DQPSK and CCK modulation with full-duplex MAC and half-duplex

base-band (BB)


Compliant transmit modulation accuracy and transmit power spectral density

Security supports 64/128-bits WEP, WPA, WPA2, WPS and WDS

MAC Address Filter

Multi-SSID





DHCP client

PPPoE client



Transmission distance Indoor: up to 100 meters

Outdoor: up to 300 meters


Support 1 Port Ethernet Interface which compliant with IEEE 802.3x standards


Ethernet port supports Automatic MDI/MDI-X configuration transceiver


Support 4 Ports Ethernet Interface which compliant with IEEE

802.3x standards.


Ethernet ports support Automatic MDI/MDI-X configuration

transceiver.






1 External antenna



802.11b/g WLAN AP RouterRE54R4 / RE54R4-DT

This RE54R4 IEEE 802.11b/g Wireless AP Router is

designed for SOHO users.

It allows users to enjoy wireless network and

easy wireless security connection..

11 12

RE54R4

G802.11


ON/OFF

802.11b/g WLAN AP RouterDetachable

Antenna

WLAN

RE54R4-DT

This RE54U IEEE 802.11b/g Wireless USB2.0 Adapter

is designed for SOHO users.

It allows users to enjoy wireless network and

easy wireless security connection.

Standard IEEE 802.11B/G compliance

Data rate 802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps

802.11b: 11, 5.5, 2, 1Mbps

Operating Frequency /Channel USA (FCC) 11 Channels:2.412GHz ~ 2.462GHz



RF Output Power 17dBm @ 11Mbps, typical +/-1dBi

14dBm @ 54Mbps, typical +/-1dBi

Receiver Sensitivity -80dBm @ 11Mbps

-68dBm @ 54Mbps


WPA

WPA2


Power Consumption TX mode power consumption: < 300mA @ 5V

RX mode power consumption: < 250mA @ 5V

Physical Specifications Dimensions: 85.5(W) x 25.6(D) x 10(H) mm

Weight: 15g



Certification CE, FCC P15, C-Tick

G802.11

54Mbps WPA WEP 100

Indoorm300

OutdoormWPA2 USBWPS

RE54U

13 14

802.11b/g WLAN USB Adapter

802.11b/g WLAN USB AdapterRE54U

WLAN

ADSL Standard ITU-T G.992.1(G.dmt)

ANSI T1.413 Issue 2

G.992.2 (G.lite)

G.994.1 (G.hs)

Auto-negotiating rate adaptation

ADSL2 G.dmt.bis (G.992.3)

ADSL2 G.lite.bis (G.992.4)

ADSL2+ (G.992.5)

Software Features RFC-1483/2684 LLC/VC-Mux bridged/routed mode

RFC-1577 Classical IP over ATM

RFC-2516 PPPoE

RFC-2364 PPPoA

ITU-T 1.610 F4/F5 OAM send and receive loop-back

802.1d Spanning-Tree Protocol

DHCP Client/Server/Relay

NAT

RIP v1/v2

DNS Relay Agent

DMZ support

IGMP Proxy/Snooping

Stateful Packet Inspection

Protection against Denial of Service attacks

IP Packet Filtering

QoS

Dynamic DNS

UPnP support

Management Web-based Configuration

Menu-driven Command-line Interpreter

Telnet Remote Management

SNMP v1/v2/Trap

Firmware upgrade through FTP, TFTP and HTTP

Configuration backup/restore

Diagnostic Tool

TR069 supported (option)

USB Protocols /Interfaces (RN243R4H only) Support USB 2.0 Host port for Samba and file sharing

application

nn802.11

Wireless Standard IEEE 802.11n (MINO 2T2R) compliance. Backwards

compatible with 802.11b/g



Support 802.11n (MIMO 2T2R): Up to 300Mbps


automatic fallback to 48, 36, 24,18, 12, 9, and 6 Mbps




Compliant transmit modulation accuracy and transmit

power spectral density


WPA,WPA2, WPS and WDS

MAC Address Filter

Multi-SSID





Ethernet LAN Protocols /Interfaces Support 4 ports Ethernet Interface 10/100 Mbps auto

selection which compliant with IEEE 802.3x standards

Ethernet port supports Automatic MDI/MDI-X configuration

transceiver

Hardware interface 1 Power jack



1 RJ11 phone jacks for ADSL connection

1 USB 2.0 Host (RN243R4H-2T2R only)

Ethernet jack for LAN port connection

Un-detachable antenna x 2 (MIMO 2T2R)

Wifi ON/OFF button

WPS button

The RN243R4 routers are high-speed ADSL2+ Ethernet router that is specifically designed to connect

to the Internet and to directly connect to your local area network (LAN) via high-speed 10/100 Mbps

Ethernet connection and/or Wireless 802.11n. The ADSL2+ modem is compatible with the latest ADSL

standards, including ADSL2 and ADSL2+, and supports up to 24 Mbps downstream and 1.5 Mbps

upstream to deliver true broadband speed and throughput.

RN243R4-2T2R (Elegant)

RN243R4-2T2R (UFO)

RN243R4-1T1R (UFO)

RN243R4-1T1R (Elegant)

RN243R4-1T1R (Infinity)

15 16

802.11n WLAN ADSL2+ RouterRN243R4-2T2R / RN243R4H-2T2R

RN243R4-2T2R (Infinity)

802.11n WLAN ADSL2+ Router

2T2R

ADSL2+

300Mbps

24Mbps

ADSL2+WPS WLAN ON/OFF 4-Port

USB2T2R

RN243R4H-2T2R (Infinity)

ADSL COMPLIANCE Full-rate ANSI T1.413 Issue 2

ITU G.992.1 (G.dmt) Annex A or B

Splitterless ITU G.992.2 (G.lite) specification

ITU G.994.1 (G.hs)

ITU G.992.3 (G.dmt.bis / ADSL2)

ITU G.992.5 (ADSL2plus)

Supports splitterless ADSL implementation

Supports Dying Gasp

ATM SUBSYSTEM PPP over ATM (RFC 2364)

Bridged IP over ATM (RFC 1483)

PPP over Ethernet (RFC 2516)

Multiprotocol Encapsulation over AAL5 (RFC 2684)

Supports up to 8 Virtual Channel Connections (VCCs)

Supports UBR, CBR, and VBR service classes

ATM Forum UNI 3.1 / 4.0 PVC

Support OAM F4 / F5 look-back, AIS and

RDI OAM cells

FEATURES IP Alias

User Datagram Protocol (UDP)

Transmission Control Protocol (TCP)

Internet Control Message Protocol (ICMP)

Internet Group Management Protocol (IGMP)

PPP over PAP (RFC1334)

PPP over CHAP (RFC1994)

MIB II support (RFC1213)

Transparent bridging as specified in IEEE 802.1D

NAT (Network Address Translation)

Dynamic Host Configuration Protocol (DHCP)

Dynamic DNS support

Routing Information Protocol (RIP) v1 and v2

The WLAN ADSL2+ Router combines 802.11n Wireless Access Point, ADSL2+

modem, router, four-ports switch, it offers quick access to the wired and

wireless network. The device supports downstream rate up to 12 / 24 Mbps

with capability of ADSL2 / ADSL2+, and upstream rate up to 1Mbps.

TN263R4-2T3R (Infinity)

TN263R4-2T3R (Elegant)nn802.11

54Mbps

11Mbps

IEEE802.11n

IEEE802.11g

IEEE802.11b


300Mbps

WIRELESS Compliant 802.11n

1T1R (TN263R4-1T1R only)



Supports 64 / 128 bits WEP and WPA

300 Mbps PHY rate support

Supports 802.11i (Security)

Reverse Data Grant (RDG) Support

WLAN on/off switch

WPS Support

MANAGEMENT TFTP client and server

DHCP client and server

FTP server and client

Universal Plug and Play (UPnP) support

Web-based Graphical User Interface (GUI)

enabling end-user device configuration via HTTP

Update of boot image or configuration data via

TFTP / FTP

Syslog

Built-in Diagnostic Tools

SNMP MIB support

ETHERNET INTERFACE IEEE 802.3

10 /100 Mbps

17 18

802.11n WLAN ADSL2+ RouterTN263R4-2T3R / TN263R4-2T2R / TN263R4-1T1R

802.11n WLAN ADSL2+ Router

300Mbps

24Mbps

ADSL2+IPv6 4-PortWPS WDS WLAN ON/OFF

2T3R

2T3R


2T2R

TN263R4-2T2R (Elegant)

2T2R

TN263R4-2T2R (UFO)

2T2R


1T1R

TN263R4-1T1R (Elegant)

1T1R

TN263R4-1T1R (UFO)

1T1R

ADSL2+

19 20

54Mbps 1-Port

24Mbps

ADSL2+ 4-Port

ADSL Standard ITU-T G.992.1(G.dmt)

ANSI T1.413 Issue 2

G.992.2 (G.lite)

G.994.1 (G.hs)

Auto-negotiating rate adaptation

ADSL2 G.dmt.bis (G.992.3)

ADSL2 G.lite.bis (G.992.4)

ADSL2+ (G.992.5)

Software Features RFC-1483/2684 LLC/VC-Mux bridged/routed mode

RFC-1577 Classical IP over ATM

RFC-2516 PPPoE

RFC-2364 PPPoA

ITU-T 1.610 F4/F5 OAM send and receive loop-back

802.1d Spanning-Tree Protocol

DHCP Client/Server/Relay

NAT

RIP v1/v2

DNS Relay Agent

DMZ support

IGMP Proxy/Snooping

Stateful Packet Inspection

Protection against Denial of Service attacks

IP Packet Filtering

QoS

Dynamic DNS

UPnP support

Management Web-based Configuration

Menu-driven Command-line Interpreter

Telnet Remote Management

SNMP v1/v2/Trap

Firmware upgrade through FTP, TFTP and HTTP

Configuration backup/restore

Diagnostic Tool

TR069 supported (option)

RW243R1 and RW243R4/R4H routers are high-speed ADSL2+ Ethernet router

that is specifically designed to connect to the Internet and to directly

connect to your local area network (LAN) via high-speed 10/100 Mbps

Ethernet and/or Universal Serial Bus (USB) connection and/or Wireless

802.11b/g. The ADSL2+ modem is compatible with the latest

ADSL standards, including ADSL2 and ADSL2+, and supports up

to 24 Mbps downstream and 1.5 Mbps upstream to deliver true

broadband speed and throughput.

Wireless StandardIEEE 802.11B/G compliance

Data rate

802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps

802.11b: 11, 5.5, 2, 1Mbps

Operating Frequency / Channel

USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz



RF Output Power



Receiver Sensitivity

-80dBm @ 11Mbps

-68dBm @ 54Mbps

Security

64/128-bits WEP Encryption

WPA

WPA2

WPS

Ethernet LAN Protocols /Interfaces Support Ethernet Interface 10/100 Mbps auto selection

which compliant with IEEE 802.3x standards.

Ethernet port supports Automatic MDI/MDI-X configuration

transceiver.

USB Protocols /Interfaces (RW243R4H only) Support USB 2.0 Host port for Samba and file sharing

application





Ethernet jack for LAN port connection

USB port (RW243R4H only)

Un-detachable antenna (2dbi)

Wifi ON/OFF button

WPS button

802.11b/g WLAN ADSL2+ Router

802.11b/g WLAN ADSL2+ RouterRW243R1/ RW243R4 / RW243R4H

RW243R1 RW243R4RW243R4H

ps

on

WPS WLAN ON/OFF

USBHost

RW243R4H

RW243R1-X0 (Infinity)

RW243R1-X0 (Elegent)

RW243R1-X0 (UFO)

z

GHzRW243R4/R4H-X0

Ethernet port

USB 2.0 Host port

Wireless 802.11b/g

1

4

4

N

N

Y

Y

Y

Y

RW243R1

RW243R4

RW243R4H

ADSL2+

G802.11

TW263R4 (Infinity)

The ADSL2+ wireless Router combines 802.11b/g

Wireless Access Point , ADSL2+ modem, router,

four-port switch, it offers quick access to the

wired and wireless network.

The device supports downstream rate up to

12/24 Mbps with capability of ADSL2/ADSL2+,

and upstream rate up to 1Mbps.

G802.11

54Mbps

24Mbps

ADSL2+ 4-Port

TW263R4-DT (UFO)

DetachableAntenna

TW263R4 (Elegant)

TW263R4 (Infinity)

21 22

802.11b/g WLAN ADSL2+ Router802.11b/g WLAN ADSL2+ Router

TW263R4 / TW263R4-DT




ITU G.994.1 (G.hs)




Supports Dying Gasp

FEATURES IP Alias











Dynamic DNS support








ATM Forum UNI 3.1/4.0 PVC

Support OAM F4/F5 look-back, AIS and RDI OAM cells

MANAGEMENT

TFTP client and server




Web-based Graphical User Interface (GUI) enabling

end-user device configuration via HTTP

Update of boot image or configuration data via TFTP/ FTP

Syslog

WIRELESS 802.11b/g Compliant 802.11g and 802.11b

2.4 GHz – 2.48GHz frequency range

Supports 64/128 bits WEP and WPA

54 Mbps wireless operation rate



10/100 Mbps




4 Ethernet jacks for LAN port connection


1 antenna

Environment Operating Temperature: 0°C~40°C

Storage Temperature: 0°C~60°C

Operating Humidity: 10%~85% RH

Storage Humidity: 10%~90% RH

ADSL2+

24Mbps

ADSL2+ USB(optional)

Easy Setup




ITU G.994.1 (G.hs)




Supports Dying Gasp









RDI OAM cells

FEATURES IP Alias











Dynamic DNS support


The ADSL2+ Router compliance to ADSL standards :

ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite),

ITU-T G.992.3 (G.dmt.bis/ADSL2), and ITU-T G.992.5 (ADSL2plus)

specification. Both Annex A (ADSL over POTS) and

Annex B (ADSL over ISDN) are supported.

T263R4/R4U (XB)

T263R4/R4U (SE)

T263R4/R4U (Infinity)R243R4/R4U (Infinity)







Update of boot image or configuration data via TFTP / FTP

Syslog


SNMP MIB support


10 /100 Mbps

Ethernet interface supporting up to 64 LAN hosts

USB SLAVE INTERFACE (optional) 1.1 slave interface

Compatible with 2.0 root hubs

Simultaneous operation with Ethernet interface

Driver for WIN 98 / 2000 / ME / XP / Vista / 7

T263R4/R4U (Infinity)

R243R4/R4U (Infinity)4-Port

ADSL2+ RouterADSL2+ Router

23 24

R243R4 / R243R4U / T263R4 / T263R4U

ADSL2+

The R243R1/ R243R1U CPE solution provides full Ethernet bridge and

router functionality and proven ADSL/ADSL2/ADSL2plus performance and

combines an “always-on” high speed connection to the telephone line,

and Ethernet and/or Universal Serial Bus (USB) (option) connection to

a host PC or Ethernet hub into a single cost-effective solution.

R243R1/ R243R1U ADSL2+ Router with full compliance to T1.413 i2,

G.992.1, G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2),

and G.992.5 (ADSL2plus), and support for Annexes A, B and M.

ADSL2+ Subsystem ANSI T1.413 Issue 2 G.992.1 Annex A (G.dmt ADSL/POTS) G.992.1 Annex B (G.dmt ADSL/ISDN) G.992.2 (G.lite) G.992.3 (ADSL2 G.dmt.bis) G.992.3 (ADSL2 G.dmt.bis)

ATM Subsystem VC and LLC Multiplexing 8 of PVC support Traffic Shaping (ATM QoS) CBR, VBR-rt, VBR-nrt, UBR OAM F4/F5 loop-back

Data Subsystem IP layer User Datagram Protocol (UDP) Transmission Control Protocol (TCP) Address Resolution Protocol (ARP) Reverse Address Resolution Protocol (RARP) Internet Control Message Protocol (ICMP)

Bridging/Routing Functionality Transparent bridging as specified in IEEE 802.1D Bridged PDU encapsulation (per RFC 2684) Network Address Translation (NAT)-- Provides up to 1024 NAT translation sessions-- Provides ALGs to supports most major applications, such as FTP,

SNMP, ICMP, H.323, L2TP, Quake, MRC, ICQ, and CUSeeMe Dynamic IP address allocation is supported through:-- Dynamic Host Configuration Protocol (DHCP) (per RFC 1541)-- Internet Protocol Configuration Protocol (IPCP) (per RFC 1332)

Point-to-Point Protocol (PPP)-- PPP over ATM (only single-link PPP per VC)-- PPP over Ethernet encapsulation over the virtual interface (per RFC 2516)-- PAP or CHAP for user authentication

Routing Information Protocol (RIP) v1 and v2 IP Multicast IGMP v1/v2/v3

Supported Client/Server Applications FTP and TFTP client/server DHCP client and server Telnet server HTTP server

Network Management DSL Forum TR37-compliant autoconfiguration using ILMI to set up access protocols (e.g., PPPoE, PPPoA) and other settings AutoDetect feature enabling automatic configuration of VCI/VPI values SNMPV1, v2C agent and tools CLI (Command Line Interface) via serial interface or Telnet over Ethernet or DSL Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP

Update of boot image or configuration data over TFTP/FTP TR069 Remote Management TR-111 TR-143 TR-064

VLAN supported PVC/Ethernet Port Maping 8 PVID Numbers for PVC/Ethernet

Special Application IGMP Proxy IGMP Snooping

Firewall Stateful packet inspection (SPI) NAT/NAPT DMZ DOS URL Filtering, Domain, MAC and IP filtering

LAN Protocols / Ethernet interface Support 1 Ethernet Interface (10/100Mbps) which compliant with IEEE 802.3x standards. 10/100 Mbps auto selection Ethernet port supports Automatic MDI/MDI-X configuration transceiver.

USB Protocols /Interfaces (R243R1U only) Support 1 USB 1.1 slave port

Hardware interface 1 Power jack 1 Power switch for power on /off 1 Reset button for reset to factory default function 1 Ethernet jack for LAN port connection 1 USB slave port (R243R1U only) 1 RJ11 phone jacks for ADSL connection

and

ne,

R243R1/R1U (Infinity)

R243R1/R1U (Sparkling)

ADSL2+ RouterR243R1 / R243R1U

25 26

ADSL2+ Router24Mbps

ADSL2+ 1 PortEasy Setup

R243R1U

USB

ADSL2+

T263R1/R1U (Infinity)24Mbps

ADSL2+ 1 Port USB

T263R1U

Easy Setup

The ADSL2+ Router compliance to ADSL standards :

ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite),

ITU-T G.992.3 (G.dmt.bis/ADSL2), and ITU-T G.992.5 (ADSL2plus)

specification. Both Annex A (ADSL over POTS) and

Annex B (ADSL over ISDN) are supported.

T263R1/R1U (Infinity)

T263R1/R1U (Sparkling)

T263R1U (Elegant)

T263R1U (UFO)




ITU G.994.1 (G.hs)




Supports Dying Gasp









RDI OAM cells

FEATURES IP Alias











Dynamic DNS support






Web-based Graphical User Interface (GUI)

enabling end-user device configuration via HTTP

Update of boot image or configuration data via

TFTP / FTP

Syslog


SNMP MIB support


10 /100 Mbps

Ethernet interface supporting up to 64 LAN hosts

USB SLAVE INTERFACE (optional) 1.1 slave interface

Compatible with 2.0 root hubs

Simultaneous operation with Ethernet interface

Driver for WIN 98 / 2000 / ME / XP / Vista / 7

27 28

ADSL2+ RouterADSL2+ Router

T263R1 / T263R1U

ADSL2+

29 30

ADSL USB ModemG123USB

ADSL USB ModemC802USB

G123USB ADSL Modem is compliant with the full-rate ANSI T1.413 Issue 2 and ITU G.dmt (G.992.1),

ADSL2(G.992.3) ADSL standards, and with the splitterless ITU G.lite (G.992.2) specification.

This rate-adaptive solution is designed for Customer Premise Equipment.

Complete USB ADSL modem solution

Compliant with ADSL standards Full-rate ANSI T1.413 Issue 2 and ITU G.dmt (G.992.1),

ADSL2 (G.992.3) standards

Splitterless ITU G.lite (G.992.2) specification

On-chip support for Dying Gasp

DMT modulation and demodulation

Full-rate adaptive modem Maximum downstream rate of 8 Mbps

Maximum upstream rate of 1 Mbps

WAN mode support PPP over ATM (RFC 2364)


Complete USB ADSL modem solution

Compliant with ADSL standards Full-rate ANSI T1.413 Issue 2 and ITU G.dmt (G.992.1) standards

Splitterless ITU G.lite (G.992.2) specification

DMT modulation and demodulation

Full-rate adaptive modem Maximum downstream rate of 8 Mbps

Maximum upstream rate of 1 Mbps

WAN mode support PPP over ATM (RFC 2364)


LAN mode support Bridged / routed Ethernet over ATM (RFC 2684 / 1483)

Classical IP over ATM (RFC 2225 / 1577)

Supports “Controllerless” driver model with ATM SAR performed in software

Supports “Controller” driver model (USB ADSL Endpoint) using 8 Mb SDRAM

USB host interface Compliant with USB Specification, Revision 1.1

Vendor specific descriptors

Bus powered USB device

Operating System Support Intel Pentium 200Mhz and up, and compatible CPU's support

Support for Windows® 98 / 2000 / XP / Vista 32 bits

Simple and intuitive graphical user interface

Software upgrades

G123USB (SE)

C802USB (SE)C802USB (XB)

G123USB (XB)

LAN mode support Bridged/routed Ethernet over ATM

(RFC 2684 / 1483)

Classical IP over ATM (RFC 2225 / 1577)

Support for up to 16 PVCs

Supports TR-37 Auto Configuration Implementation

USB host interface Compliant with USB Revision 1.1

Support for USB 2.0 in legacy mode

Bus powered USB device

Operating System Support Intel Pentium 200Mhz and up, and compatible CPU's support

Support for Windows® Me / 2000 / XP and Vista 32 / 64 bits

Simple and intuitive graphical user interface

Software upgrades

8Mbps

ADSLEasy Setup

8Mbps

ADSLEasy Setup

C802USB ADSL Modem is compliant with the full-rate ANSI

T1.413 Issue 2 and ITU G.dmt (G.992.1) ADSL standards,

and with the splitterless ITU G.lite (G.992.2) specification.

This rate-adaptive solution is designed for Customer

Premise Equipment.

G123

ADSL USB

31 32

Powerline WLAN ADSL2+ Router

Powerline WLAN ADSL2+ Router

The Powerline WLAN ADSL2+ Router compliance to supported ADSL standards : ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite), ITU-T G.992.3 (G.dmt.bis/ADSL2), and ITU-T G.992.5 (ADSL2+) specification. Both Annex A (ADSL over POTS) and Annex B (ADSL over ISDN) are supported.

This products use existing AC electrical wiring as a physical medium for broadband networking based on the HomePlug AV standard. The HomePlug AV standard supports data rates up to 200 Mbps. The TW263HR3 also combines 802.11b/g Wireless Access Point , it offers quick access to the wireless network.

TW263HR3

TW263HR3

Mbps200AVAV




ITU G.994.1 (G.hs)




Supports Dying Gasp








Support OAM F4 / F5 look-back, AIS and RDI OAM cells

FEATURES IP Alias











Dynamic DNS support








Update of boot image or configuration data via TFTP / FTP

Syslog


SNMP MIB support

WIRELESS 802.11b/g Support WLAN ON/OFF switch button (Optional)

Support WLAN WPS switch button (Optional)

Compliant 802.11g and 802.11b

2.4 GHz – 2.48 GHz frequency range

Supports 64/128 bits WEP and WPA

54 Mbps wireless operation rate



10 /100 Mbps

POWERLINE INTERFACE 128-bits DES encryption

Data rate: up to 200Mbps

Compliant with HomePlug® AV specification

Frequency band: 4.3 MHz – 20.9 MHz


1 Network ID button




1 antenna

ISDN Phone

RJ45 Cable

Power cord RJ11 cable

RJ11 socket

Power line

wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w

Powerline adaptor

Powerline Ethernet cable

Power Socket

Po

NetworkID

Reset

ADSLLAN 3LAN 2LAN 1

RJ45 Cable

Power cord RJ11 cablee r

NetworkID

Reset

ADSLLAN 3LAN 2LAN 1





Dimension :183X127X33mm

54Mbps

24Mbps

ADSL2+ 3-Port200Mbps

HomePlug

The best solution for no-new-wire networking in the house or office.

l204H1-V2

200Mbps PowerlineEthernet Adapter 200Mbps Powerline

Ethernet AdapterI204H1-V1 / I204H1-V2 / I204HP1-V0

The I204H1 operates on HomePlug AV standard,

providing up to 200Mbps data speed over the existing

household power supply. This Product is cost-effective,

easy to create a home network without spending time

and money to run expensive CAT-5 cabling. I204H1 is

the best solution for no-new-wire networking in the

house or office.

33 34

FEATURES & SPECIFICATIONS Standard : HomePlug AV Specification compliant

Speed : up to 200 Mbps

Modulation : Supports OFDM, 1024 / 256 / 64 / 16 / 8 QAM,

QPSK, BPSK, and ROBO modulation schemes

Frequency : 4.3 MHz ~ 20.9 MHz

Security : 128-bits AES encryption

Support IGMP managed multicast IP transmission

IEEE 802.3, 802.3u 10/100M Ethernet standard

With extended power socket (I204HP1-V0 only)

Power source : 100V / 240V AC, 50~60 HZ

Environment : 0 ~ 50 °C

HomePlug

Mbps200AVAV

PWR--- Power LED

PL-ACT---Powerline Activity LED

ETH---LAN Link / Activity LED

PLC

PWR

ETH

LED indicators :

l204H1-V1

Inte

rnet

WWW

Network SolutionRoom A

Room D

Room B

Ethernet cable Powerline

NB

Phone Jack

Router

NetNetw ution

m D

work Solu

Room

R t

I204H1-V1

I204H1-V2

Inte

WWWWWNB

Phone JackH1-V24HH1 V2

IN204D3-V0

Room C

I204HP1-V0

l204HP1-V0

The best solution for no-new-wire networking in the house or office.

200Mbps Powerline Desktop Ethernet AP Router 200Mbps Powerline Desktop

Ethernet AP Router IN204D3

The IN204DP3 operates on HomePlug AV and IEEE

802.11b/g/n 2T2R MIMO standard, providing up to 200Mbps

data speed over the existing household power supply and

up to 300Mbps wireless connection rate. This Product is

cost-effective, easy to create a home network without

spending time and money to run expensive CAT-5 cabling.

It is the best solution for no-new-wire networking in the

house or office.35 36

Mbps200AVAV

re e.

ps

d

g.

nn802.11

FEATURES & SPECIFICATIONS of Homeplug Chipset solution : Intellon INT6400

Standard : HomePlug AV Specification compliant

Speed : up to 200 Mbps

Modulation : Supports OFDM, 1024/256/64/16/8 QAM,

QPSK, BPSK, and ROBO modulation schemes

Frequency : 4.3 MHz ~ 20.9 MHz

Security : 128-bits AES encryption

Support IGMP managed multicast IP transmission

IEEE 802.3, 802.3u 10/100M Ethernet standard

Power source : 100V / 240V AC, 50~60 HZ

With extended power socket

FEATURES & SPECIFICATIONS of Wireless IEEE 802.11n compliance. Backwards compatible with

802.11b/g



802.11n (40MHz): Up to 300Mbps

802.11n (20MHz): Up to 150Mbps


automatic fallback to 48, 36, 24,18, 12, 9, and 6 Mbps




Compliant transmit modulation accuracy and transmit power

spectral density

IEEE 802.11i Security supports 64/128-bits WEP, WPA,

WPA2, WPS and WDS

MAC Address Filter

Multi-SSID


Operating Frequency /Channel

USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz



FEATURES & SPECIFICATIONS of Network and Management WAN IP Assignment

Static IP

DHCP client

PPPoE client

Configuration

Web Browser


WAN Protocols /Interfaces

Ethernet interface

Support 1 Port Ethernet Interface which compliant with IEEE 802.3x standards.


Ethernet port supports Automatic MDI/MDI-X configuration transceiver.

LAN Protocols /Interfaces

Ethernet interface

Support 3 Ports Ethernet Interface which compliant with IEEE 802.3x standards.



IN204D3

Inte

rnet

WWW

Network SolutionRoom A

Room D

Room B

Ethernet cable Powerline

NB

Phone Jack

Router

NetNetw ution

m D

work Solu

Room

R t

I204H1-V1

I204H1-V2

Inte

WWWWWNB

Phone JackH1-V24HH1 V2

IN204D3-V0

Room C

I204HP1-V0

The switch is an easy installation 8-port Gigabit Ethernet switch

with high performance and competitive price.

It's a perfect way to extend your network structure.

Features Compliant with the IEEE802.3 10Base-T Ethernet, IEEE802.3u

100Base-TX,IEEE802.3ab 1000Base-T specifications

8 port 10/100/1000Mbps TX Auto-Negotiation Ethernet Switch

Auto negotiation of speed (10/100/1000Mbps), and duplex mode.

Note that 1000Mbps supports only full duplex mode

Supports TP interface Auto MDIX function for auto TX/RX swap

Automatic Source MAC Address Learning and Aging

Support Jumbo frame

Supports Store & Forward architecture and performs forwarding and

filtering

Broadcast Storming Filter function

IEEE802.3x flow control for Full-duplex

Back Pressure function for 10/100Mbps Half-duplex operation

Supports to handle up to 1522 bytes packet

LED indicators for simple diagnostics and management

Plug and Play

Green Ethernet

Specifications Chip：RTL8368S+RTL8214

Standards:

IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,

IEEE802.3ab 1000Base-T, IEEE 802.3x Flow Control

Access Method: CSMA/CD

Network Media:

10BASE –T: UTP Cat. 3 or up,

100BASE-TX/1000Base-T: UTP Cat. 5 or up

Transmission Method: Store and Forward

Data Transfer Rate:

10M/100M (Half-duplex), 10M/100M/1000Mbps (Full-duplex)

Auto MDI/MDIX: Yes

LED Indicators: Power, Link/Activity

Power：7.5W（max）

Dimension: 159mm(L) x 93mm(W) x30mm(H)

Weight: 240g

Temperature: 0° to 40° C (operating), -20° to 70° C (storage)

Humidity:

10% to 85 % non-condensing (operating),

5% to 90% non-condensing (storage)

Certifications: FCC Part 15 Class A, CE Mark, VCCI

Power Adaptor: Input AC 100~240V output DC 5V 1A

sw

The switch is an easy installation 5-port Gigabit Ethernet switch

with high performance and competitive price.

It's a perfect way to extend your network structure.

RE8PG

witch

RE8PG

37 38

8-Port 10/100/1000 MbpsGigabit Ethernet SwitchRE5PG

5-Port 10/100/1000 MbpsGigabit Ethernet Switch

Features Compliant with the IEEE802.3 10Base-T Ethernet, IEEE802.3u

100Base-TX,IEEE802.3ab 1000Base-T specifications

5 port 10/100/1000Mbps TX Auto-Negotiation Ethernet Switch

Auto negotiation of speed (10/100/1000Mbps), and duplex mode.

Note that 1000Mbps supports only full duplex mode

Supports TP interface Auto MDIX function for auto TX/RX swap

Automatic Source MAC Address Learning and Aging

Support Jumbo frame

Supports Store & Forward architecture and performs forwarding

and filtering

Broadcast Storming Filter function

IEEE802.3x flow control for Full-duplex

Back Pressure function for 10/100Mbps Half-duplex operation

Supports to handle up to 1522 bytes packet

LED indicators for simple diagnostics and management

Plug and Play

Chip：RTL8366S

Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,

IEEE802.3ab 1000Base-T, IEEE 802.3x Flow Control

Green Ethernet

Specifications Access Method: CSMA/CD

Network Media:

10BASE –T: UTP Cat. 3 or up,

100BASE-TX/1000Base-T: UTP Cat. 5 or up

Transmission Method: Store and Forward

Data Transfer Rate:

10M/100M (Half-duplex),

10M/100M/1000Mbps (Full-duplex)

Auto MDI/MDIX: Yes

LED Indicators: Power, Link/Activity

Power：5W（max）

Dimension: 115mm(L) x 91mm(W) x 30mm(H)

Weight: 170g

Temperature: 0° to 40° C (operating), -20° to 70° C (storage)

Humidity:

10% to 85% non-condensing (operating),

5% to 90% non-condensing (storage)

Certifications: FCC Part 15 Class A, CE Mark, VCCI

Power Adaptor: Input AC 100~240V output DC 5V 1A

ompetitive price. ance and co

ur network structure.o extend you e o k struc u e.d yo

RE5PG (Infinity)

D

r up,

UTP Cat. 5 or up

re and Forward

RE5PG (Elegant)

Switch

PlayPlug

&Mpbs

10/100Mpbs

1000 FullDuplex

AutoMDIX

PlayPlug

&Mpbs

10/100Mpbs

1000 FullDuplex

AutoMDIX

5Ports

8Ports

Voice FEATURES Support for SIP protocols

Telephony functions (call waiting, call hold, call forward)

Echo cancellation (G.168) – configurable

Silence suppression (Voice Activity Detection (VAD) and Comfort Noise

Generation (CNG)

FAX - T.38 relay and G.711 pass through

Incoming and outgoing calls can be routed over PSTN

(for RN243VR4-2SO only)

Soft relay support to handle connections between the FXS and FXO ports (for RN243VR4-2SO only)

Hard ‘fail-safe’ relay to connect the FXS port directly to the FXO port in

the event of power failure or loss of the Internet connection (for RN243VR4-2SO only)

Software Features RFC-1483/2684 LLC/VC-Mux bridged/routed mode RFC-1577 Classical IP over ATM RFC-2516 PPPoE RFC-2364 PPPoA ITU-T 1.610 F4/F5 OAM send and receive loop-back 802.1d Spanning-Tree Protocol DHCP Client/Server/Relay NAT RIP v1/v2 DNS Relay Agent DMZ support IGMP Proxy/Snooping Stateful Packet Inspection Protection against Denial of Service attacks IP Packet Filtering QoS Dynamic DNS UPnP support

ADSL Standard ITU-T G.992.1(G.dmt) ANSI T1.413 Issue 2 G.992.2 (G.lite) G.994.1 (G.hs) Auto-negotiating rate adaptation ADSL2 G.dmt.bis (G.992.3) ADSL2 G.lite.bis (G.992.4) ADSL2+ (G.992.5)

Management Web-based Configuration Menu-driven Command-line Interpreter Telnet Remote Management SNMP v1/v2/Trap Firmware upgrade through FTP, TFTP and HTTP Configuration backup/restore Diagnostic Tool TR069 supported (option)

Wireless Standard IEEE 802.11n (MINO 2T2R) compliance. Backwards compatible with 802.11b/g Support Wifi ON/OFF switch button Support Wifi WPS switch button Support 802.11n (MIMO 2T2R): Up to 300Mbps Supports 802.11g data rates of up to 54 Mbps with automatic fallback to 48, 36, 24,18, 12, 9, and 6 Mbps Supports 802.11b data rates of up to 11 Mbps with automatic fallback to 5.5, 2, and1 Mbps Supports long and short preamble modes Compliant transmit modulation accuracy and transmit power spectral density IEEE 802.11i Security supports 64/128-bits WEP, WPA,WPA2, WPS and WDS MAC Address Filter Multi-SSID IEEE 802.11e QoS enhancement (WMM)

Ethernet LAN Protocols /Interfaces Support 4 ports Ethernet Interface 10/100 Mbps auto selection which compliant with IEEE 802.3x standards. Ethernet port supports Automatic MDI/MDI-X configuration transceiver.

Hardware interface 1 Power jack 1 Power switch for power on /off 1 Reset button for reset to factory default function 1 RJ11 phone jack for ADSL connection 4 Ethernet Jack for LAN port connection Un-detachable antenna x 2 (MIMO 2T2R) 1 RJ11 phone jack for VOIP FXO connection

(RN243VR4-2SO / RN243VR4H-2SO only) 2 RJ11 phone jacks for VOIP FXS 2 ports connection 1 Wifi ON/OFF button 1 WPS button

1 USB 2.0 Host (RN243VR4H-2SO only)

RN243VR4-2SO

RN243VR4H-2SO

nn802.11

54Mbps

11Mbps

IEEE802.11n

IEEE802.11g

IEEE802.11b


300Mbps

The RN243VR4 CPE IAD solution provides VoIP, WLAN 802.11n (MIMO 2T2R) and full Ethernet bridge and

router functionality and proven ADSL/ADSL2/ADSL2plus performance and combines an “always-on” high

speed connection to the telephone line, and Ethernet connection to a host PC or Ethernet hub into a

single cost-effective solution. RN243VR4 IAD Router with full compliance to T1.413 i2, G.992.1, G.992.2

(G.lite), G.992.3 (G.dmt.bis/ADSL2), and G.992.5 (ADSL2plus), and support for Annexes A, B and M for DSL.

SIP voice protocol and 802.11n wireless lan standard.

USBHost

39 40

Superior IAD RN243VR4H-2SO / RN243VR4-2SO / RN243VR4-2S

Superior IAD 300Mbps

24Mbps

ADSL2+ 4-PortWPS WLAN ON/OFF

2T2R VoIP

IAD

Advance IAD with Host-USB interfaceAdvance IAD with Host-USB interface

CW243VR4H-2SO

41 42

The CW243VR4H CPE IAD solution provides VoIP, WLAN 802.11b/g and

full Ethernet bridge and router functionality and proven ADSL/ADSL2/ADSL2plus

performance and combines an “always-on” high speed connection to the

telephone line, and Ethernet connection to a host PC or Ethernet hub into

a single cost-effective solution. CW243VR4H IAD Router with full compliance

to T1.413 i2, G.992.1, G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2),

and G.992.5 (ADSL2plus), and support for Annexes A, B and M for

DSL. SIP voice protocol and 802.11b/g wireless lan standard.

g and

DSL2/ADSL2plus

ction to the

t hub intot hub into

ccompliance

rr

Voice features Support for SIP protocols



Silence suppression (Voice Activity Detection (VAD) and Comfort Noise Generation (CNG)


Incoming and outgoing calls can be routed over VoIP

Incoming and outgoing calls can be routed over PSTN

Soft relay support to handle connections between the FXS and FXO ports

Hard ‘fail-safe’ relay to connect the FXS port directly to the FXO port in the event

of power failure or loss of the Internet connection

Wireless LAN 802.11b/g Support WLAN ON/OFF switch button

Support WLAN WPS switch button


Supports 802.11g data rates of up to 54 Mbps with automatic fallback to

48, 36, 24,18, 12, 9, and 6 Mbps


and 1 Mbps

Supports 64 and 128-bit WEP, WPA, and WPA2, WPS

ADSL2+ features DMT: T1.413, G.992.1, G.992.2, G.992.3, G.992.5 with auto-detection

Supports PPP encapsulation over ATM (PPPoA) and PPP over Ethernet (PPPoE)

Supports RFC1483 Route and RFC1483 Bridge

Point-to-Point Protocol (PPP)

-- PPP over ATM (only single-link PPP per VC)

-- PPP over Ethernet encapsulation over the virtual interface (per RFC 2516)

-- PAP or CHAP for user authentication

Network Management Web-based Graphical User Interface (GUI) enabling end-user device

configuration via HTTP

CD-ROM easy setup program

Firewall Security Stateful packet inspection (SPI)

NAT/NAPT

DMZ

DOS

Common types of Attacks

MAC and IP level packet filtering

LAN Protocols / Ethernet Interfaces Support 1 Port Ethernet Interface (10/100Mbps) which compliant with




USB Protocol /Interface Support 1 port USB compliant USB 2.0 Host

SAMBA server application






1 USB 2.0 Host

1 antenna

1 RJ11 phone jack for VOIP FXO connection

2 RJ11 phone jacks for VOIP FXS 2 ports connection

1 WLAN ON/OFF button

1 WLAN WPS button






G802.11

VoIP24Mbps

ADSL2+USBHost 4-Port

CW243VR4H-2SO

WLAN ON/OFF

54Mbps WPS

IAD

PHONE 1 PHONE 2

ation (CNG)

CW243VR4-2SO / CW243VR4-2S




Silence suppression (Voice Activity Detection (VAD) and Comfort Noise Generation (CNG)


Incoming and outgoing calls can be routed over PSTN (for CW243VR4-2SO only)

Soft relay support to handle connections between the FXS and FXO ports

(for CW243VR4-2SO only)

Hard ‘fail-safe’ relay to connect the FXS port directly to the FXO port in the event

of power failure or loss of the Internet connection (for CW243VR4-2SO only)

Wireless LAN 802.11b/g Support WLAN ON/OFF switch button

Support WLAN WPS switch button



48, 36, 24,18, 12, 9, and 6 Mbps


and1 Mbps

Supports 64 and 128-bit WEP, WPA, and WPA2, WPS


Supports PPP encapsulation over ATM (PPPoA) and PPP over Ethernet (PPPoE)








CD-ROM easy setup program

Firewall Security Stateful packet inspection (SPI)

NAT/NAPT

DMZ

DOS



LAN Protocols / Ethernet Interfaces Support 1 Port Ethernet Interface (10/100Mbps) which compliant with









1 antenna

1 RJ11 phone jack for VOIP FXO connection (for CW243VR4-2SO only)

2 RJ11 phone jacks for VOIP FXS 2 ports connection

1 WLAN ON/OFF button

1 WLAN WPS button






The CW243VR4 CPE IAD solution provides VoIP, WLAN

802.11b/g and full Ethernet bridge and router functionality and

proven ADSL/ADSL2/ADSL2plus performance and combines an

“always-on” high speed connection to the telephone line, and

Ethernet connection to a host PC or Ethernet hub into a single

cost-effective solution. HCW243VR4 IAD Router with full compli-

ance to T1.413 i2, G.992.1, G.992.2 (G.lite), G.992.3

(G.dmt.bis/ADSL2), and G.992.5 (ADSL2plus), and support for

Annexes A, B and M for DSL. SIP voice protocol and 802.11b/g

wireless lan standard.

CW243VR4-2SO

Optimize IADOptimize IAD

43 44

54Mbps VoIP24Mbps

ADSL2+ 4-PortWPS WLAN ON/OFF

G802.11

ADSL PSTN PHONE 2 PHONE 1LAN 1LAN 2LAN 3LAN 4POWER RESET

eneration (CNG)

(for CW243VR4-2SO only)

IAD

Basic IADBasic IAD

C243VR1-1S




Silence suppression (Voice Activity Detection (VAD) and Comfort Noise

Generation (CNG)



Supports PPP encapsulation over ATM (PPPoA) and PPP over Ethernet

(PPPoE)








CD-rom easy setup program

Security Firewall Stateful packet inspection (SPI)

NAT/NAPT

DMZ

DOS



LAN Protocols / Ethernet InterfacesEthernet interface

Support 1 Port Ethernet Interface (10/100Mbps) which compliant with IEEE

802.3x standards.



C243VR1-1S

24Mbps

ADSL2+ 1-PortEasy SetupVoIP

The C243VR1 CPE IAD solution provides VoIP and full Ethernet bridge and

router functionality and proven ADSL/ADSL2/ADSL2plus performance and

combines an “always-on” high speed connection to the telephone line,

and Ethernet connection to a host PC or Ethernet hub into a single

cost-effective solution. C243VR1 IAD Router with full compliance to T1.413 i2,

G.992.1, G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), and G.992.5 (ADSL2plus),

and support for Annexes A, B and M for DSL. SIP voice protocol standard.





1 RJ11 phone jacks for VOIP FXS 1 port connection





Dimension:132X90X30mm

45 46

IAD

802.11b/g WLAN VoIP Gateway802.11b/g WLAN VoIP Gateway

VoIP

RE54VR4-2S

54Mbps VoIP

Wireless LAN 802.11b/g Fully integrated IEEE 802.11g-compliant MAC, baseband, and modem

functions


48, 36, 24,18, 12, 9, and 6 Mbps

Supports 802.1lb data rates of up to 11 Mbps with automatic fallback to

5.5, 2, and1 Mbps

OFDM modulation with full-duplex MAC and half-duplex baseband

DBPSK, DQPSK and CCK modulation with full-duplex MAC and

half-duplex base-band (BB)

Multiple radio interfaces


Resistant to adjacent channel and co-channel interference

Compliant transmit modulation accuracy and transmit power spectral

density

Fully parameterized AGC design allows flexibility to interface to a

variety of RF analog front end devices

Supports 64 and 128-bit WEP, WPA, and WPA2,

-- WDS support

-- AP mode support

-- AP + Client mode support

-- Client mode support

Network Protocol SIP protocol RFC3261

Codec G.711: 64k bit/s (PCM)

G.723.1: 6.3k / 5.3k bit/s

G.726: 16k / 24k / 32k / 40k bit/s (ADPCM)

G.729A: 8k bit/s (CS-ACELP)

G.729B: adds VAD & CNG to G.729

Voice Quality VAD: Voice activity detection

CNG: Comfortable noise generator

LEC: Line echo canceller

-- G.165, G.168 compliant

-- Echo canceller for each port

Call Function Call Hold

Call Waiting

Call Forward

Call Transfer

Caller ID

3-ways conference

DTMF Function RFC2833

In-Band DTMF

Out-of Band DTMF

SIP Info

IP Assignment Static IP

DHCP client

PPPoE client

QoS ToS field

NAT Traversal STUN (Simple Traversal UDP through NAT)



Auto provisioning HTTP

Fax modes T.38 relay support

G.711 pass through

WAN/LAN Protocols / Interfaces Support 1 Port Ethernet Interface (10/100Mbps)






Support 4 Ports Ethernet Interface (10/100Mbps)



Ethernet ports support Automatic MDI/MDI-X







2 RJ11 phone jacks for VOIP FXS connection

1 External antenna

G802.11

47 48

RE54VR4-2S

4-PortWPS WLAN ON/OFF

Environment : Operating Temperature: 0°C~40°C




Dimension : 183X127X33mm

Easy SetupVoIP

Network Protocol SIP v1 (RFC2543), v2 (RFC3261)

IP/TCP/UDP/RTP/RTCP

IP/ICMP/ARP/RARP/SNTP

TFTP Client/DHCP Client/ PPPoE Client

Telnet/HTTP Server

DNS Client

NAT/DHCP Server

PPTP client

VLAN


G.723.1: 6.3k / 5.3k bit/s

G.726: 16k / 24k / 32k / 40k bit/s (ADPCM)



GSM

iLBC






Packet Loss Compensation

Adaptive Jitter Buffer


Call Waiting

Call Forward

Call Transfer

Caller ID

3-ways conference

Toll-Bypass (Auto Answer)


In-Band DTMF

Out-of Band DTMF

SIP Info

SIP Server Registrar Server

Outbound Proxy

Tones Ring Tone

Ring Back Tone

Dial Tone

Busy Tone

Programming Tone

Phone Function Volume Adjustment

Speed dial key

Phone book

Hook Flash


DHCP client

PPPoE client

Security HTTP 1.1 basic/digest

authentication for Web setup

MD5 for SIP authentication

(RFC2069/ RFC 2617)

QoS ToS field

Diff serv

NAT Traversal STUN (Simple Traversal UDP

through NAT)


Console/Telne

Windows base Easy setup

program

Firmware Upgrade TFTP

Console

HTTP


TFTP

Fax modes T.38 relay support

G.711 pass through

Models and hardware interfaces1S

1 Power jack for DC input



2 Ethernet jacks for LAN and WAN port connection

1 RJ11 phone jack for VOIP FXS connection

1SP





1 RJ11 phone jack for VOIP FXS connection

1 RJ11 phone jack for PSTN backup

1SO





1 phone jack for VOIP FXS connection

1 RJ11 phone jack for FXO

2S





2 RJ11 phone jacks for VOIP FXS connection


Support 1 Port Ethernet Interface

(10/100Mbps) which compliant with



Ethernet port supports Automatic

MDI/MDI-X configuration

transceiver.


Support 1 Port Ethernet Interface

(10/100Mbps) which compliant with



Ethernet ports support Automatic

MDI/MDI-X configuration

transceiver.





1S

2S

1SO

1SP

FXO

PSTN Backup

WAN

1

1

1

1

LAN

1

1

1

1

FXS

1

2

1

1

FXO Remark

1

1

49 50

5VA-2S (Infinity)

5VA-1SP (Sparkling)

VoIP ATA VoIP ATA

5VA SeriesCVA Series

5VA SeriesCVA Series

VoIP

Network Protocol SIP v1 (RFC2543), v2 (RFC3261)

IP/TCP/UDP/RTP/RTCP

IP/ICMP/ARP/RARP/SNTP

TFTP Client/DHCP Client/ PPPoE Client

Telnet/HTTP Server

DNS Client

NAT/DHCP Server

PPTP client

VLAN


G.723.1: 6.3k / 5.3k bit/s

G.726: 16k / 24k / 32k / 40k bit/s (ADPCM)



GSM

iLBC (option)






Packet Loss Compensation

Adaptive Jitter Buffer


Call Waiting

Call Forward

Call Transfer

Caller ID

3-ways conference

Toll-Bypass (Auto Answer)


In-Band DTMF

Out-of Band DTMF

SIP Info

SIP Server Registrar Server

Outbound Proxy

Tones Ring Tone

Ring Back Tone

Dial Tone

Busy Tone

Programming Tone

CVP-1S

Easy SetupVoIP Call SIP

Phone Function Volume Adjustment

Speed dial key

Phone book

Hook Flash


DHCP client

PPPoE client

Security HTTP 1.1 basic/digest authentication for Web setup

MD5 for SIP authentication (RFC2069/ RFC 2617)

QoS ToS field

Diff serv

NAT Traversal STUN (Simple Traversal UDP through NAT)


Console/Telne


Firmware Upgrade TFTP

Console

HTTP


TFTP


Support 1 Port Ethernet Interface (10/100Mbps) which

compliant with IEEE 802.3x standards.





Support 1 Port Ethernet Interface (10/100Mbps) which

compliant with IEEE 802.3x standards.


Ethernet ports support Automatic MDI/MDI-X


Hardware interface LAN port: 1x RJ45

WAN port: 1 x RJ45

LCD display: 2x16 characters

Phone case: 27-button keypads

LED lights: LEDs for SIP, LAN and WAN connection

indicator

Power port: DC 7.5V 600mA

Internet

xDSL / Cable Modem

PC VoIP PhoneEthernet C

able

Ethernet Cable

VoIP Phone

51 52

CVP

VoIP PhoneCVP-1S

VoIP

53 54

PCI 56K V.92 ModemAS560PCI/AC560PCI/CS560PCI

USB 56K V.92 ModemAS560USB

AS560PCI (use Agere solution)

GENERAL DESCRIPTION Use AGERE Olympia SV92U2 / 1040 chipset solution

USB bus Powered/ system Powered

USB ver.2.0 supports as an optional under Windows XP / Windows 2000

and Windows 2003 server.

Windows 2000 / ME / XP / Vista / 7 and Windows Server 2003 operation

supports

Pentium Host-based Controller / CPU required

V.92 and V.90 technology present Receiving Data Rate up to 56Kbps,

from a digitally connected central site modem.

Modem on Hook (MoH), Fast connection, PCM upstream 48Kbps

supported.

Fax Class 1 modem supported, up to 14.4Kbps Data transmission /

Receiving rate.

Telephone Answering Machine (TAM) Functional via Audio Sound device

V.42 LAPM and MNP error correction.

V.44, V.42, V.42bis and MNP 5 data Compression

AT command set compatible

DATA MODEM V.92, V.90, V.34bis, V.34, V.32bis, V.32, V.22bis, V.22 A/B, V.23, V.21,

Bell 212A, and Bell 103.

Received data from a digital source using V.92 or V.90 compatible central

site modem over the digital telephone network portion of the PSTN at line

speed up to 56Kbps with automatic fall-back depends on line condition.

FAX MODEM

ITU-T V.17, V.29, V.27ter and 21 channel 2.

TIA / EIA 578 Class 1 FAX send and receive

speeds of 14400, 12000, 9600, 7200, 4800 or

2400bps.

VOICE/AUDIO MODE TAM through the microphone / speaker interface

on Audio Sound card

ERROR CORRECTION Support V.42 LAMP, MNP 2-4

DATA COMPRESSION Support V.44, V.42bis and MNP 5

DAA Line interface Capabilities DTMF Tone Dial / accurate make-break ratio Pulse Dial

Proprietary transformer-based isolation barrier

Programmable even detect for Caller-ID reception and Power Ring detection

Programmable AC / DC impedance termination for Return-Loss / Specific

Countries homologations

FLOW CONTROL Both transmit and receive fax data are buffered Data transmission over DTE is

Flow controlled by XON / XOFF and RTS / CTS.

4800 or

r interface

GENERAL DESCRIPTION

Integrated PCI interface

Operating System Support Windows 98 / 2000 / ME / XP / NT / Vista / 7

Host-based Controller utilizing PC host CPU (Pentium*)

V.92 and V.90 technology allow data to be received at speed up to 56 Kbps from

a digitally connected central site modem. Modem on Hook (MoH),

fast connection, PCM upstream 48 kbits /s also supported.

Support Fax Class 1 send and receive rates up to 14400 bps.

Telephone Answering Machine (TAM) Function enabled

with sound card

V.42 LAPM and MNP error correction.

V.44, V.42 bis and MNP 5 data Compression

Communication software compatible AT command set.

DATA MODEM V.92, V.90, V.34bis, V.34, V.32bis, V.32, V.22bis, V.22 A/B, V.23,V.21, Bell 212A

and Bell 103.

Received data from a digital source using V.92 or V.90 compatible central site

modem over the digital telephone network portion of the PSTN at line speeds up

to 56 Kbps with automatic fall-back depends on line condition.

FAX MODEM ITU-T V.17, V.29, V.27 ter and V.21 channel 2 .

TIA/EIA 578 Class 1 FAX send and receive speeds of 14400, 12000, 9600, 7200,

4800 or 2400 bps.

VOICE/AUDIO MODE

TAM through the microphone and speaker interface of sound card

ERROR CORRECTION Support V.42 LAPM, MNP 2-4

DATA COMPRESSION Support V.44, V.42 bis and MNP 5

DIALING TYPE Tone or Pulse dialing.

FLOW CONTROL Both transmit and receive fax data are buffered within the Modem .

Data transfer to and from the DTE is flow control by XON / XOFF and RTS / CTS.

56KbpsFAXDATA

AS560USB

CS560PCI (use Conexant solution)

AC560PCI (use Agere solution)

TAMVOICE

56KbpsFAXDATA TAM

VOICE

56K

GENERAL DESCRIPTION

Agere Controller technology design Operating System.

Support both ITU-T V.92 and V.90 standard, allows data to be received

at speeds up to 56 Kbps from a digitally connected central site Modem.

Plug and Play.

Provide user the convenience for setup modem easily.

Data , Fax , TAM (Telephone Answering Machine).

Call discrimination Concurrent data, fax, voice auto detection.

DATA MODEM V.92, V.90, V.34bis, V.32 bis , V.32, V.22 bis, V.22 A/B, V.23,

V.21, Bell 212A and Bell 103. FAX MODEM

ITU-T V.17, V.29, V.27 ter and V.21 channel 2 .

TIA/EIA 578 Class 1 FAX send and receive speed rates

up to 14.4 kbps.

VOICE/AUDIO MODE

Telephone Answering Machine (TAM).

Include Enhanced ADPCM compression /decompression.

Tone Detection/Generation and Call Discrimination.

Concurrent DTMF detection.

TAM through the microphone and speaker interface.

ERROR CORRECTION Support V.42 LAPM, MNP 2-4

AUDIOSPAN MODES Provide full-duplex analog simultaneous audio / voice and data over a single

telephone line at a data rate with audio of 4800 bps using V.61 modulation.

DATA COMPRESSION Support V.44, V.42 bis and MNP 5.

DIALING TYPE Tone or Pulse dialing.

FLOW CONTROL Both transmit and receive fax data are buffered within the Modem .

Data transfer to and from the DTE is flow control by XON / XOFF and RTS / CTS.

56KbpsFAXDATA

AH560RS

TAMVOICE

55

RS232 56K V.92 ModemAH560RS

Products listed in this brochure may be subject to change and product development without prior notice.

For further information about BaudTec’s products

or how BaudTec can provide good service to you to excel your business,

you are welcome to visit us at www.baudtec.com.tw

or call us on +886-2-26438458.

Contact

The icons appear on the products are for application indication only. The trademark or intellectual property is belonging to their respective owners.

Documents

Products Guide - BaudTecBackwards compatible with 802.11b/g z Support Wifi ON/OFF switch button z Support Wifi WPS switch button ... This IEEE 802.11n Wireless Hight Power AP Router