Contents Products Dia Weight (in) per metre (Kg) 1⁄ 4 0.09 5⁄ 16 0.13 3⁄ 8 0.19 7⁄ 16 0.26 1⁄ 2 0.34 9⁄ 16 0.43 5⁄ 8 0.54 16mm 0.54 11⁄ 16 0.65 3⁄ 4 0.77 20mm 0.85

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Providing Service to the Road Transport Industry

ContentsProducts Page No.

Standard Products in Aluminium & 04-10Stainless Steel

Bearers/Runners – Aluminium & Steel 11-14

Load Restraint Track 15

Aluminium Floor Planks 16-18

Timber Flooring 19-20

Aluminium Side Raves 21-28

Aluminium Side Guards 29-31

Curtain-Sider Body Assembly 32

Aluminium Corner Pillars 33-41

Aluminium Corner Pillars – Curtain-Sider 42

Corner Pillars – GRP Captive 43

GRP Panelled Van Body Assembly 44

GRP Panels 45-46

Aluminium Cant Rails – GRP Captive 47

Aluminium Cant Rails 48-54

Roofing Components 55

Aluminium Top Hats 56-59

Aluminium Zeds 60

Aluminium Mouldings 61-62

Aluminium Door Cappings 63

Aluminium Dropside Sections 64-65

Dropside Body Assembly 66

Dropside Pillars 67

Dropside Components 68

Aluminium Tipper Sections 69-72

Aluminium Kick Strips 73

Aluminium/ABS Cappings 74-82

Aluminium Bulkheads 83

Steel Sections 84-86

©2007 Aalco Metals Ltd. All copyrights are reserved and no part of this publication may be reproduced, stored or transmitted in any form or by any means, electronic, mechanical,photocopying, recording or otherwise, without the prior permission of Aalco Metals Ltd of the Hersham Centre, Hersham Green, Hersham, Surrey, England. KT12 4HP

The information contained herein is based on our present knowledge and experience and is given in good faith. However, no liability will be accepted by the Company inrespect of any action taken by any third party in reliance thereon.

As the products detailed herein may be used for a wide variety of purposes and as the Company has no control over their use, the Company specifically excludes allconditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or their fitness for any particular purpose. Any advice given by theCompany to any third party is given for that party’s assistance only and without any liability on the part of the Company.Any contract between the Company and a customer will be subject to the Company’s Conditions of Sale. The extent of the Company’s liabilities to any customer is clearlyset out in those Conditions; a copy of which is available on request.

WEIGHTSAll weights shown in this publication are for guidance only. They are calculated using nominal dimensions and scientifically recognised densities. Please note that inpractice, the actual weight can vary significantly from the theoretical weight due to variations in manufacturing tolerances and compositions.

November 2007

Where possible drawings are actual size. Unlessotherwise stated diagram measurements are in ‘mm’.

0532 Road Transport text 2007 5/11/07 10:40 am Page 2

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

48

3

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Standard Products

Dia Weight (in) per metre (Kg)

1⁄4 0.095⁄16 0.133⁄8 0.197⁄16 0.261⁄2 0.349⁄16 0.435⁄8 0.5416mm 0.5411⁄16 0.653⁄4 0.7720mm 0.8513⁄16 0.917⁄8 1.051 1.3711⁄8 1.7411⁄4 2.1515⁄16 2.3713⁄8 2.6035mm 2.6117⁄16 2.8411⁄2 3.0915⁄8 3.6313⁄4 4.2117⁄8 4.832 5.4921⁄8 6.2021⁄4 6.9523⁄8 7.7521⁄2 8.58

Dia Weight (in) per metre (Kg)

25⁄8 9.4623⁄4 10.43 12.431⁄4 14.531⁄2 16.833⁄4 19.34 22.041⁄4 24.841⁄2 27.843⁄4 31.05 34.351⁄4 37.851⁄2 41.553⁄4 45.46 49.461⁄2 58.07 67.371⁄4 72.271⁄2 77.28 87.981⁄2 99.29 11191⁄2 12410 13712 19813 23214 26915 30916 352

Round BarAlloy 6082-T6

Flat BarAlloy 6082-T6 or 6063-T6/6063A-T6

Size Weight (in) per metre (Kg)

3⁄8 x 1⁄4 0.161⁄2 x 1⁄8 0.111⁄2 x 3⁄16 0.161⁄2 x 1⁄4 0.221⁄2 x 3⁄8 0.335⁄8 x 1⁄8 0.145⁄8 x 3⁄16 0.205⁄8 x 1⁄4 0.275⁄8 x 3⁄8 0.415⁄8 x 1⁄2 0.553⁄4 x 1⁄16 0.083⁄4 x 1⁄8 0.163⁄4 x 3⁄16 0.253⁄4 x 1⁄4 0.333⁄4 x 3⁄8 0.493⁄4 x 1⁄2 0.663⁄4 x 5⁄8 0.827⁄8 x 1⁄8 0.191 x 1⁄16 0.111 x 1⁄8 0.221 x 3⁄16 0.331 x 1⁄4 0.441 x 5⁄16 0.541 x 3⁄8 0.661 x 1⁄2 0.871 x 5⁄8 1.091 x 3⁄4 1.3111⁄4 x 1⁄8 0.2711⁄4 x 3⁄16 0.4111⁄4 x 1⁄4 0.5511⁄4 x 3⁄8 0.8211⁄4 x 1⁄2 1.0911⁄4 x 5⁄8 1.3711⁄4 x 3⁄4 1.6411⁄4 x 1 2.1911⁄2 x 1⁄8 0.3311⁄2 x 3⁄16 0.4911⁄2 x 1⁄4 0.6611⁄2 x 3⁄8 0.9811⁄2 x 1⁄2 1.3111⁄2 x 5⁄8 1.6411⁄2 x 3⁄4 1.9711⁄2 x 1 2.6211⁄2 x 11⁄4 3.2813⁄4 x 1⁄4 0.7613⁄4 x 3⁄8 1.1513⁄4 x 1⁄2 1.53


13⁄4 x 3⁄4 2.2913⁄4 x 1 3.0613⁄4 x 11⁄4 3.822 x 1⁄8 0.442 x 3⁄16 0.662 x 1⁄4 0.872 x 3⁄8 1.312 x 1⁄2 1.752 x 5⁄8 2.192 x 3⁄4 2.622 x 1 3.502 x 11⁄4 4.372 x 11⁄2 5.2521⁄2 x 3⁄16 0.8221⁄2 x 1⁄4 1.0921⁄2 x 3⁄8 1.6421⁄2 x 1⁄2 2.1921⁄2 x 3⁄4 3.2821⁄2 x 1 4.3721⁄2 x 11⁄2 6.5621⁄2 x 2 8.743 x 1⁄8 0.663 x 3⁄16 0.983 x 1⁄4 1.313 x 3⁄8 1.973 x 1⁄2 2.623 x 5⁄8 3.283 x 1 5.253 x 2 10.531⁄2 x 1⁄4 1.5231⁄2 x 1⁄2 3.044 x 1⁄8 0.874 x 3⁄16 1.304 x 1⁄4 1.754 x 3⁄8 2.624 x 1⁄2 3.504 x 5⁄8 4.374 x 3⁄4 5.254 x 1 6.994 x 11⁄4 8.744 x 2 14.05 x 1⁄4 2.195 x 1⁄2 4.376 x 1⁄4 2.626 x 3⁄8 3.936 x 1⁄2 5.256 x 1 10.5

Aluminium Extrusions


4

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Standard Products

Square BarAlloy 6082-T6

Box SectionSQUAREAlloy 6063-T6 or 6082-T6

Box SectionRECTANGULARAlloy 6063-T6 or 6082-T6


1⁄4 0.115⁄16 0.173⁄8 0.251⁄2 0.445⁄8 0.683⁄4 0.987⁄8 1.341 1.75


11⁄4 2.7311⁄2 3.9313⁄4 5.352 6.9921⁄2 10.93 15.731⁄2 21.44 28.0


11⁄2 x 3⁄4 x16 swg 0.4811⁄2 x 1 x1⁄16 0.5211⁄2 x 1 x10 swg 1.002 x 1 x10 swg 1.222 x 11⁄2 x10 swg 1.343 x 1 x10 swg 1.673 x 11⁄2 x10 swg 1.90


3 x 13⁄4 x10 swg 2.013 x 2 x10 swg 2.114 x 1 x10 swg 2.124 x 13⁄4 x10 swg 2.454 x 2 x10 swg 2.566 x 2 x10 swg 3.406 x 3 x 3⁄8 10.8


1⁄2 x 1⁄2 x 16 swg 0.203⁄4 x 3⁄4 x 16 swg 0.311 x 1 x 16 swg 0.421 x 1 x 10 swg 0.7811⁄4 x 11⁄4 x16 swg 0.5311⁄4 x 11⁄4 x10 swg 1.0011⁄2 x 11⁄2 x16 swg 0.6411⁄2 x 11⁄2 x10 swg 1.23


13⁄4 x 13⁄4 x10 swg 1.452 x 2 x16 swg 0.872 x 2 x 10 swg 1.682 x 2 x 1⁄4 3.0621⁄2 x 21⁄2 x10 swg 2.123 x 3 x10 swg 2.574 x 4 x10 swg 3.474 x 4 x 1⁄4 6.56


3⁄8 o/d x 16 swg 0.111⁄2 o/d x 18 swg 0.121⁄2 o/d x 16 swg 0.151⁄2 o/d x 10 swg 0.265⁄8 o/d x 18 swg 0.155⁄8 o/d x 16 swg 0.205⁄8 o/d x 10 swg 0.353⁄4 o/d x 18 swg 0.193⁄4 o/d x 16 swg 0.243⁄4 o/d x 10 swg 0.447⁄8 o/d x 18 swg 0.227⁄8 o/d x 16 swg 0.297⁄8 o/d x 10 swg 0.531 o/d x 18 swg 0.251 o/d x 16 swg 0.331 o/d x 10 swg 0.611 o/d x 3⁄16 0.8311⁄8 o/d x 18 swg 0.2811⁄8 o/d x 16 swg 0.3711⁄8 o/d x 10 swg 0.7011⁄4 o/d x 18 swg 0.3211⁄4 o/d x 16 swg 0.4211⁄4 o/d x 12 swg 0.6511⁄4 o/d x 10 swg 0.7911⁄4 o/d x 3⁄16 1.0813⁄8 o/d x 16 swg 0.4613⁄8 o/d x 10 swg 0.8811⁄2 o/d x 18 swg 0.3811⁄2 o/d x 16 swg 0.5011⁄2 o/d x 10 swg 0.9611⁄2 o/d x 3⁄16 1.3511⁄2 o/d x 1⁄4 1.7115⁄8 o/d x 16 swg 0.5515⁄8 o/d x 10 swg 1.0515⁄8 o/d x 3⁄16 1.4813⁄4 o/d x 16 swg 0.59


13⁄4 o/d x 10 swg 1.1417⁄8 o/d x 10 swg 1.23129⁄32 o/d x 7 swg 1.652 o/d x 16 swg 0.682 o/d x 10 swg 1.322 o/d x 3⁄16 1.862 o/d x 1⁄4 2.3921⁄4 o/d x 16 swg 0.7721⁄4 o/d x 10 swg 1.4921⁄2 o/d x 16 swg 0.8621⁄2 o/d x 10 swg 1.6721⁄2 o/d x 3⁄16 2.3821⁄2 o/d x 1⁄4 3.0821⁄2 o/d x 3⁄8 4.3623⁄4 o/d x 10 swg 1.843 o/d x 16 swg 1.033 o/d x 12 swg 1.653 o/d x 10 swg 2.023 o/d x 3⁄16 2.903 o/d x 1⁄4 3.7631⁄2 o/d x 16 swg 1.2131⁄2 o/d x 10 swg 2.3731⁄2 o/d x 1⁄4 4.464 o/d x 16 swg 1.384 o/d x 12 swg 2.234 o/d x 10 swg 2.724 o/d x 1⁄4 5.1541⁄2 o/d x 10 swg 3.0741⁄2 o/d x 1⁄4 5.835 o/d x 10 swg 3.435 o/d x 1⁄4 6.5251⁄2 o/d x 1⁄4 7.216 o/d x 10 swg* 4.136 o/d x 1⁄4 7.9061⁄2 o/d x 1⁄4 8.58

* Alloy 6005-T6

TubeAvailable in one or more of thefollowing alloys6082-T6, 6063-T6, 6063A-T6

Tee SectionAlloy 6082-T6 or 6063A-T6


3⁄4 x 3⁄4 x 1⁄8 0.301 x 1 x 1⁄8 0.4111⁄4 x 11⁄4 x 1⁄8 0.5211⁄2 x 11⁄2 x 1⁄8 0.6311⁄2 x 11⁄2 x 3⁄16 0.9211⁄2 x 11⁄2 x 1⁄4 1.20


2 x 1 x 1⁄8 0.632 x 2 x 1⁄8 0.852 x 2 x 3⁄16 1.252 x 2 x 1⁄4 1.643 x 3 x 1⁄4 2.51

Dimensions are in the order: upright x cross piece x thickness



48

5

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Standard Products

ChannelAvailable in one or more of thefollowing alloys6082-T6, 6063-T6, 6063A-T6


3⁄8 x 3⁄8 x 1⁄16 0.111⁄2 x 1⁄2 x 1⁄8 0.275⁄8 x 5⁄8 x 1⁄16 0.195⁄8 x 5⁄8 x 1⁄8 0.363⁄4 x 1⁄2 x 1⁄8 0.443⁄4 x 3⁄4 x 1⁄16 0.243⁄4 x 3⁄4 x 1⁄8 0.497⁄8 x 7⁄8 x 1⁄8 0.521 x 1⁄2 x 1⁄8 0.381 x 3⁄4 x 1⁄8 0.491 x 1 x 1⁄16 0.311 x 1 x 1⁄8 0.601 x 1 x 3⁄16 0.861 x 1 x 1⁄4 1.1011⁄8 x 11⁄8 x 1⁄8 0.6811⁄4 x 1⁄2 x 1⁄8 0.4411⁄4 x 3⁄4 x 1⁄8 0.5511⁄4 x 1 x 1⁄8 0.6611⁄4 x 11⁄4 x 1⁄16 0.3911⁄4 x 11⁄4 x 1⁄8 0.7611⁄4 x 11⁄4 x 3⁄16 1.1011⁄4 x 11⁄4 x 1⁄4 1.4111⁄2 x 1⁄2 x 1⁄8 0.4911⁄2 x 3⁄4 x 1⁄8 0.6011⁄2 x 1 x 1⁄8 0.7111⁄2 x 11⁄2 x 1⁄16 0.4911⁄2 x 11⁄2 x 1⁄8 0.9811⁄2 x 11⁄2 x 1⁄4 1.7413⁄4 x 1 x 1⁄8 0.76


13⁄4 x 13⁄4 x 1⁄8 1.0913⁄4 x 13⁄4 x 1⁄4 2.072 x 1⁄2 x 1⁄8 0.602 x 3⁄4 x 1⁄8 0.712 x 1 x 1⁄8 0.822 x 1 x 3⁄16 1.222 x 1 x 1⁄4 1.522 x 11⁄2 x 1⁄8 1.032 x 11⁄2 x 1⁄4 1.972 x 2 x 1⁄16 0.642 x 2 x 1⁄8 1.262 x 2 x 3⁄16 1.832 x 2 x 1⁄4 2.4021⁄4 x 11⁄4 x 3⁄16 1.4321⁄2 x 1 x 1⁄8 0.9321⁄2 x 11⁄4 x 3⁄16 1.523 x 1 x 1⁄8 1.043 x 11⁄2 x 1⁄8 1.263 x 11⁄2 x 3⁄16 1.843 x 11⁄2 x 1⁄4 x 5⁄16 2.663 x 2 x 1⁄8 1.483 x 2 x 3⁄16 2.173 x 2 x 1⁄4 2.8431⁄2 x 11⁄2 x 1⁄4 x 5⁄16 2.904 x 2 x 1⁄8 1.694 x 2 x 1⁄4 x 5⁄16 3.665 x 2 x 1⁄4 x 5⁄16 4.246 x 2 x 1⁄4 x 5⁄16 4.536 x 3 x 1⁄4 x 3⁄8 6.23

Dimensions order: base x leg x base thickness x leg thickness


1⁄2 x 1⁄2 x 1⁄16 0.101⁄2 x 1⁄2 x 1⁄8 0.195⁄8 x 5⁄8 x 1⁄16 0.135⁄8 x 5⁄8 x 1⁄8 0.253⁄4 x 3⁄4 x 1⁄16 0.163⁄4 x 3⁄4 x 1⁄8 0.307⁄8 x 7⁄8 x 1⁄8 0.361 x 1 x 1⁄16 0.211 x 1 x 1⁄8 0.411 x 1 x 3⁄16 0.591 x 1 x 1⁄4 0.7611⁄8 x 11⁄8 x 1⁄8 0.4611⁄4 x 11⁄4 x 1⁄16 0.2711⁄4 x 11⁄4 x 1⁄8 0.5211⁄4 x 11⁄4 x 3⁄16 0.7611⁄4 x 11⁄4 x 1⁄4 0.9811⁄2 x 11⁄2 x 1⁄16 0.3211⁄2 x 11⁄2 x 1⁄8 0.6311⁄2 x 11⁄2 x 3⁄16 0.92


11⁄2 x 11⁄2 x 1⁄4 1.2013⁄4 x 13⁄4 x 1⁄8 0.7413⁄4 x 13⁄4 x 3⁄16 1.0913⁄4 x 13⁄4 x 1⁄4 1.422 x 2 x 1⁄16 0.432 x 2 x 1⁄8 0.852 x 2 x 3⁄16 1.252 x 2 x 1⁄4 1.642 x 2 x 3⁄8 2.3821⁄2 x 21⁄2 x 1⁄8 1.0621⁄2 x 21⁄2 x 3⁄16 1.5821⁄2 x 21⁄2 x 1⁄4 2.083 x 3 x 1⁄8 1.283 x 3 x 3⁄16 1.913 x 3 x 1⁄4 2.513 x 3 x 3⁄8 3.694 x 4 x 1⁄4 3.394 x 4 x 3⁄8 5.006 x 6 x 1⁄2 10.0

Equal AngleAvailable in one or more of the following alloys6082-T6, 6063-T6, 6063A-T6

Unequal AngleAvailable in one or more of the following alloys6082-T6, 6063-T6, 6063A-T6


3⁄4 x 1⁄2 x 1⁄16 0.133⁄4 x 1⁄2 x 1⁄8 0.251 x 1⁄2 x 1⁄16 0.151 x 1⁄2 x 1⁄8 0.301 x 5⁄8 x 1⁄8 0.331 x 3⁄4 x 1⁄16 0.181 x 3⁄4 x 1⁄8 0.3611⁄4 x 1⁄2 x 1⁄8 0.3611⁄4 x 3⁄4 x 1⁄8 0.4111⁄4 x 1 x 1⁄8 0.4711⁄2 x 1⁄2 x 1⁄8 0.4111⁄2 x 3⁄4 x 1⁄8 0.4611⁄2 x 1 x 1⁄8 0.5213⁄4 x 3⁄4 x 1⁄8 0.5213⁄4 x 1 x 1⁄8 0.572 x 1⁄2 x 1⁄8 0.522 x 3⁄4 x 1⁄8 0.572 x 1 x 1⁄8 0.632 x 1 x 3⁄16 0.92


2 x 1 x 1⁄4 1.202 x 11⁄2 x 1⁄8 0.742 x 11⁄2 x 3⁄16 1.092 x 11⁄2 x 1⁄4 1.4221⁄2 x 1 x 1⁄8 0.7321⁄2 x 11⁄2 x 1⁄8 0.8521⁄2 x 11⁄2 x 3⁄16 1.2521⁄2 x 11⁄2 x 1⁄4 1.643 x 1 x 1⁄8 0.853 x 1 x 1⁄4 1.643 x 11⁄2 x 1⁄8 0.963 x 11⁄2 x 3⁄16 1.403 x 11⁄2 x 1⁄4 1.863 x 2 x 1⁄8 1.073 x 2 x 3⁄16 1.583 x 2 x 1⁄4 2.084 x 1 x 1⁄8 1.064 x 2 x 1⁄4 2.514 x 3 x 1⁄4 2.956 x 3 x 3⁄8 5.63

RT Channels


Size (in) Weight per metre (Kg)

11⁄2 x 11⁄2 x 1⁄8 0.992 x 1 x 1⁄8 0.843 x 11⁄2 x 3⁄16 1.953 x 11⁄2 x 1⁄4 x 5⁄16 2.743 x 2 x 1⁄4 2.894 x 2 x 1⁄4 x 5⁄16 3.765 x 2 x 1⁄4 x 5⁄16 4.205 x 21⁄2 x 1⁄4 x 3⁄8 5.286 x 3 x 1⁄4 x 3⁄8 6.396 x 3 x 3⁄8 x 1⁄2 8.698 x 3 x 3⁄8 x 1⁄2 9.109 x 3 x 3⁄8 x 1⁄2 9.2910 x 3 x 3⁄8 x 1⁄2 10.67


6

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Standard Products

SheetAlloy 1050-H14

SheetOther alloys

Size Alloys – 5251-H22 3103-H14 4015-H12 6082-T651(mm)

2000 x 1000 x 1.02500 x 1250 x 1.02000 x 1000 x 1.22438 x 1220 x 1.22500 x 1250 x 1.23000 x 1500 x 1.22000 x 1000 x 1.52500 x 1250 x 1.53000 x 1500 x 1.52000 x 1000 x 2.02500 x 1250 x 2.03000 x 1250 x 2.03000 x 1500 x 2.02000 x 1000 x 2.52500 x 1250 x 2.52438 x 1219 x 2.832000 x 1000 x 3.02500 x 1250 x 3.03000 x 1250 x 3.03000 x 1500 x 3.0

We have in-house facilities for PlasticCoating to suit your requirements

Aluminium Rolled Products

Size Weight(mm) per sheet (Kg)

2000 x 1000 x 0.5 2.712500 x 1250 x 0.5 4.232000 x 1000 x 0.6 3.252500 x 1250 x 0.6 5.082000 x 1000 x 0.7 3.79


2000 x 1250 x 0.7 5.932000 x 1000 x 0.8 4.342500 x 1250 x 0.8 6.782500 x 1250 x 1.0 8.472500 x 1250 x 1.2 10.2

Stucco SheetAlloy 1050-H14


2500 x 1250 x 0.9 7.622500 x 1250 x 1.2 10.222500 x 1250 x 1.5 12.752500 x 1250 x 2.0 17.00

White Painted Sheet3105-H46/3003-H45


2000 x 1000 x 0.5 2.712500 x 1250 x 0.5 4.232000 x 1000 x 0.6 3.252500 x 1250 x 0.6 5.082000 x 1000 x 0.8 4.342500 x 1250 x 0.8 6.782000 x 1000 x 1.0 5.422500 x 1250 x 1.0 8.473000 x 1250 x 1.0 10.202000 x 1000 x 1.2 6.502500 x 1250 x 1.2 10.203000 x 1250 x 1.2 12.203000 x 1500 x 1.2 14.602000 x 1000 x 1.5 8.132500 x 1000 x 1.5 10.162500 x 1250 x 1.5 12.702500 x 1500 x 1.5 15.243000 x 1000 x 1.5 12.203000 x 1250 x 1.5 15.203000 x 1500 x 1.5 18.303100 x 1000 x 1.5 12.603250 x 1250 x 1.5 16.513500 x 1250 x 1.5 17.783750 x 1250 x 1.5 19.054000 x 1500 x 1.5 24.392000 x 1000 x 2.0 10.802500 x 1000 x 2.0 13.552500 x 1250 x 2.0 16.902500 x 1500 x 2.0 20.332500 x 1600 x 2.0 21.682500 x 1750 x 2.0 23.713000 x 1000 x 2.0 16.303000 x 1250 x 2.0 20.303000 x 1400 x 2.0 22.763000 x 1500 x 2.0 24.403000 x 1600 x 2.0 26.023000 x 1750 x 2.0 28.463000 x 2000 x 2.0 32.523100 x 1250 x 2.0 21.003100 x 1500 x 2.0 25.203250 x 1250 x 2.0 22.023250 x 1500 x 2.0 26.42


3500 x 1250 x 2.0 23.713500 x 1500 x 2.0 28.463750 x 1250 x 2.0 25.413750 x 1500 x 2.0 30.494000 x 1000 x 2.0 21.734000 x 1250 x 2.0 27.174000 x 1400 x 2.0 43.364000 x 1500 x 2.0 32.604000 x 1600 x 2.0 34.694000 x 1750 x 2.0 37.944000 x 2000 x 2.0 43.792000 x 1000 x 2.5 13.602500 x 1250 x 2.5 21.203000 x 1500 x 2.5 30.502000 x 1000 x 3.0 16.302500 x 1000 x 3.0 20.332500 x 1250 x 3.0 25.402500 x 1500 x 3.0 30.492500 x 1600 x 3.0 32.522500 x 1750 x 3.0 35.573000 x 1000 x 3.0 24.403000 x 1250 x 3.0 30.503000 x 1400 x 3.0 34.153000 x 1500 x 3.0 36.603000 x 1600 x 3.0 39.023000 x 1750 x 3.0 42.683000 x 2000 x 3.0 48.783100 x 1250 x 3.0 31.503100 x 1500 x 3.0 37.803250 x 1250 x 3.0 33.033250 x 1500 x 3.0 39.633500 x 1250 x 3.0 35.573500 x 1500 x 3.0 42.683750 x 1250 x 3.0 38.013750 x 1500 x 3.0 45.734000 x 1000 x 3.0 32.534000 x 1250 x 3.0 40.664000 x 1400 x 3.0 45.534000 x 1500 x 3.0 48.804000 x 1600 x 3.0 52.034000 x 1750 x 3.0 56.914000 x 2000 x 3.0 65.00


48

7

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Standard Products

Stainless Steel Rolled Products


2438 x 1219 x 2.0 16.82500 x 1250 x 2.0 17.63000 x 1500 x 2.0 25.32000 x 1000 x 3.0 16.72438 x 1219 x 3.0 24.82500 x 1250 x 3.0 26.0


3000 x 1500 x 3.0 37.52438 x 1219 x 4.5 37.62500 x 1250 x 4.5 39.52438 x 1219 x 6.0 50.62500 x 1250 x 6.0 53.23000 x 1500 x 6.0 76.6

5 Bar TreadplateAlloy 5754-H111

PlateAlloys 6082-T651, 5083-0, 6082-T6

Sheet & PlateGrade 1.4003Utility Stainless Steel

We have extensive in house plate sawing facilities thatenable us to supply your requirements cut to size from theabove stock range and also stocks of plate up to 6” thick.

Size Weight 5083-0 6082-T651 6082-T6(mm) per plate (kg)

2500 x 1250 x 4.0 33.902500 x 1250 x 5.0 42.342500 x 1250 x 6.0 50.782500 x 1250 x 8.0 67.812500 x 1250 x 10.0 84.682500 x 1250 x 12.0 101.562500 x 1250 x 15.0 127.182500 x 1250 x 16.0 135.622500 x 1250 x 20.0 169.372500 x 1250 x 25.0 211.77

ShateAlloy 5251-H22Some sizes available in Alloy 6082-T651and/or 1050A-H14


2000 x 1000 x 4.0 21.72500 x 1250 x 4.0 33.92438 x 1219 x 4.76 38.42000 x 1000 x 5.0 27.12500 x 1250 x 5.0 42.3


2000 x 1000 x 6.0 32.52500 x 1250 x 6.0 50.82438 x 1219 x 6.35 51.22500 x 1250 x 6.35 53.8

DiamondbriteTreadbrite(propeller pattern) 3048 x 1220 x 3.048mm

Size Weight (mm) per plate (Kg)

2500 x 1250 x 2.0 50.92500 x 1250 x 3.0 76.43000 x 1500 x 3.0 110.02500 x 1250 x 4.0 102.03000 x 1500 x 4.0 147.02500 x 1250 x 5.0 127.02500 x 1250 x 6.0 153.0

Size Weight (mm) per sheet (Kg)

2500 x 1250 x 1.0 24.52000 x 1000 x 1.5 24.52500 x 1250 x 1.5 38.23000 x 1500 x 1.5 55.02000 x 1000 x 2.0 32.62500 x 1250 x 2.0 50.93000 x 1500 x 2.0 73.42500 x 1250 x 2.5 63.7

Hot Rolled 1D Finish Cold Rolled 2B Finish

Aluminium Rolled Products

Product Size Approximate weightCode (mm) per plate (Kg)

ATG15 2500 x 1250 x 1.5 13.2ATG20 2500 x 1250 x 2.0 16.8ATG30 2500 x 1250 x 3.0 26.1

TripleGrip (ATG)Aluminium TreadplateAlloy 5052H32

Circle PolishedStainlessGrades 430 & 304


2500 x 1250 x 0.7 17.92500 x 1250 x 0.9 23.02500 x 1250 x 1.2 30.72500 x 1250 x 1.5 38.42500 x 1250 x 2.0 51.2


8

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Standard Products

Size Thk Weightkg/mtr

25 x 25 1.2 0.9225 x 25 1.5 1.1425 x 25 2.0 1.4930 x 30 1.2 1.1030 x 30 1.5 1.3730 x 40 2.0 1.8440 x 40 1.2 1.4940 x 40 1.5 1.8540 x 40 2.0 2.4550 x 50 1.5 2.3250 x 50 2.0 3.0860 x 60 2.0 3.7180 x 80 2.0 4.98100 x 100 2.0 6.40

Square Tube

SheetPolished 240 Grit & Bright PolishedWhite Poly Coat 1 SideGrades 430 & 304

Stainless Steel Structural Tube Square & Rectangular

Size Thk Weightkg/mtr

30 x 10 1.5 0.7130 x 15 1.5 0.7630 x 20 1.5 1.1440 x 15 1.5 1.2540 x 20 1.2 1.1040 x 20 1.5 1.3740 x 40 2.0 1.8450 x 25 1.2 1.4150 x 25 1.5 1.7550 x 25 2.0 2.3150 x 30 1.5 1.8560 x 20 1.5 1.8560 x 20 2.0 2.4560 x 40 1.5 2.3260 x 40 2.0 3.0880 x 40 1.5 2.8080 x 40 2.0 3.71100 x 50 2.0 4.68100 x 60 3.0 7.53

Rectangular Tube

NB. Large range of other sizes available.

Many other stainless steel sheet andplate items are available in a range ofgrades, thicknesses, sizes and finishes.





Thickness Unit Weight on base (mm) per plate (Kg)

3000 x 1000 x 3.0 78.03000 x 1250 x 4.5 143.03000 x 1250 x 6.0 180.03000 x 1250 x 8.0 210.0

Stainless TreadPlateAISI 304, Dual Certified to DIN 59220 (T) &ASTM A793/96 Pattern 1

Stainless Steel Rolled Products – continued


48

9

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Standard Products

Other products available from Aalco®

Please contact your local service centre for further information on all Aalco products and a copy of our comprehensive stock list.

Details on reverse of this brochure.

Stainless Steel Bar & Sections

Stainless Steel Welded Mesh

Stainless Steel Sheet & Plate

Grade 1.4301 (304) in two panel sizes: 8ft x 4ftand 6ft x 3ft with various wire thicknesses andaperture dimensions

Round Flat Angle

Square Hexagon

A huge range in thicknessess 0.4mm to 12mmand sheet sizes 2m x 1m to 6m x 2mGrades: 1.4016 (430)

1.4301/4307 (304/304L)1.4401/4404 (316/316L)

Pre-polished sheet – Dull Polished and Mirror Polished

Wide range of sizes in variouspolished finishes

Sheet Plate Extrusions

Angle Flat Round

Hexagon Square Tube

Stainless Steel Decorative Tube

Copper, Brass & Bronze

`


01

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Bearers/Runners

FB1Wt. 2.437 kg/m

6.35

3.81

38.1

50.8

31.11

6.101

8 7.4

2 .67

6.10 1

6.101

3.81

63.5

47.63

38.1

FB3Wt. 2.404 kg/m

767.4

35.9

3.81

3.18

45.9

81.3

69.3

FB8Wt. 1.695 kg/m

FB4Wt. 2.018 kg/m


48

11

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Bearers/Runners

2.67

FB12Wt. 2.814 kg/m

7.212.302

57.2

FB58Wt. 3.03 kg/m

4.75

4.75

4.754.75

50.8mm

47.6

0.721

3.96

6.101

50.8

4.75

FB28Wt. 2.56 kg/m


12

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Bearers/Runners

38.1

2.67

8.291

FB11Wt. 2.369 kg/m

51

50.8

R532.22

FB2Wt. 3.443 kg/m

4.522

6.101


48

13

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Steel Bearers/RunnersA

A

3 1

C

C

B

31

Galvanised Steel Lipped Bearers/RunnersAalco® Description A B C Length

Part No. mm KgsGB2-2134 Lipped Channels 75 50 2 2134 5.6GB23-2438 Lipped Channels 100 50 2.3 2438 8.9GB23-2540 Lipped Channels 100 50 2.3 2540 9.0GB23-2550 Lipped Channels 100 50 2.3 2550 9.3GB25-2550 Lipped Channels 100 50 2.5 2550 10.1GB3-2438 Lipped Channels 100 50 3 2438 11.7GB3-2550 Lipped Channels 100 50 3 2550 12.1GB3-7620 Lipped Channels 100 50 3 7620 36.3

Galvanised Steel Plain Runners – Main SidesAalco® Description A B C Length

Part No. mm KgsGR3-130-7 Plain Channels 130 50 3 7620 36.1GR3-150-7 Plain Channels 150 50 3 7620 39.3GR3-150-9 Plain Channels 150 50 3 9144 47.1GR5-100-6 Plain Channels 100 50 5 6400 45.2GR5-100-7 Plain Channels 100 50 5 7620 53.9GR5-100-9 Plain Channels 100 50 5 9144 64.6GR5-127-7 Plain Channels 127 50 5 7620 61.3GR5-127-9 Plain Channels 127 50 5 9144 73.6GR5-150-7 Plain Channels 150 50 5 7620 68.8GR5-150-9 Plain Channels 150 50 5 9144 82.6

3045 mm

2993 mm (73 x 41)


41

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Load Restraint Track

82

50.10

45.50 18.3518.25

51

03.241 25R 12.50 7

28

05.6

92

3045 mm

2993 mm (73 x 41)27 mm 25 mm2527 2993 (73 x 41)

3045

Section 1806SSStainless Steel

Section 1806Zinc Plated Steel

1.05


48

15

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Floor Planks

FP1Wt. 2.336 kg/m

80.512.302

2.38

22.23

FP2Wt. 2.376 kg/m

80.512.302

2.38

22.23


16

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Floor Planks

15

FP12Wt. 2.338 kg/m

81032

2.5

FP24Wt. 2.143 kg/m

2.3

032

16


48

17

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Floor Planks

1.98

12.7

FP15Wt. 1.518 kg/m

43.822

13.49

FP16Wt. 0.475 kg/m

72

8.05

6.822

2.29

22.23

FP4Wt. 2.169 kg/m

4.52


18

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Timber Flooring

Phenolic Mesh Faced Plywood with a slip-resistant surface

BENEFITS

Slip ResistanceRegular mesh pattern, 240 g/sm, film faceprovides slip resistance and a hard-wearingsurface.

Predictable PerformanceQuality control in selection of materials andmanufacture ensures consistent performance.

StabilityThe high temperature pressing of film andveneer, together with the thick film face giveslong life and wear resistance.

Film Faced ReverseThe smooth film face on the reverse providesprotection from damp environments.

GUIDANCE FOR INSTALLATION

Resealing of Cut or Drilled AreasOur phenolic mesh faced plywoods are edgesealed at the factory. To obtain long life, all cutedges and drilled holes must be sealed beforefixing. Water entering unsealed areas cancause localised swelling and reduce the servicelife of the plywood.

FixingsGalvanised or stainless steel fixings will resistcorrosion and unsightly damage to the board.

Mechanical SupportAdequate mechanical support will preventexcessive flexing of the board in service andreduce the possibility of fracturing the phenoliccoating.

Regular MaintenanceThe boards require minimal maintenance innormal use. However, removal of any build upof dirt and algae on the mesh surface willprevent reduction of slip resistance.

FL-BD18

Our phenolic mesh faced plywood features quality face veneers in hardwood of consistentspecies and grade. As with the film-faced plywood, the veneers are bonded with phenolic‘weather and boilproof’ glue lines throughout. The mesh face is produced with a heavier weightof phenolic film pressed with a mesh platen to create a slip-resistant surface.

Size Weight (kg)

2440 x 1220 x 12mm (220gm/m2) 24.82440 x 1220 x 15mm (220gm/m2) 31.02440 x 1220 x 18mm (220gm/m2) 37.22500 x 1220 x 18mm (220gm/m2) 38.2

Size Range


48

19

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Timber Flooring

EGL LaminateEdge Glued Laminate that with care can be crosscut and drilled to suit almost any size of floor

Outers – Keruing or Kapur for hardness Inners – Sepetir or mixed red hardwood for rigidity and lighter weight

Profile: Machined to half lap pattern with ‘crusher bead’ to allow expansion without distortion

Width: 305mm face / 319mm overall

Thicknesses: 22mm & 28mm

Lengths: Up to 45ft

Standard lengths (feet): 20, 25, 26, 28, 30, 45

Weight per foot: 22mm – 1.35kg / 28mm 1.9kg

Please also refer to the following alternative flooring solutions:Page 8 – Aluminium TreadplatePage 9 – Stainless Treadplate

Pages 16-18 – Aluminium Floor PlanksPage 89 – Item 4 – LoadsMORE Aalcodek Floor Plank

Keruing Half Lap Planking

150mm wide in two thicknesses – 22mm and 28mmAvailable in lengths from 16ft to 26ft Weight per linear metre is 3.2kg for the 22mm thick and 4.06kg for the 28mm thick


20

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Side Raves

SR1Wt. 1.865 kg/m

SR3Wt. 1.660 kg/m

3.18

53.98

63.5

81.343.721

31. 001

34.93

35

81.3

81.381.3

3.18


48

21

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Side Raves

SR4Wt. 2.065 kg/m

SR5Wt. 1.730 kg/m

63.5

63.5

31.75

5.521

5.301

352.5431.755.3

45.2

5.3

45 .2

3.5


22

3 AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Side Raves

50.80 3.96

38.321

63.5

87.40

3.18

24.89

34.93

SR17Wt. 1.652 kg/m

SR19Wt. 2.511 kg/m


48

23

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Side Raves

63.5

38.1

85.551

2.821

3.18

3.18

201

64.77

81.3

81. 3

81 .3

81. 3

SR11Wt. 1.982 kg/m

SR14Wt. 1.75 kg/m

SR22Wt. 1.52 kg/m

38.1

5.770.3

35

63

2.5

510.3


42

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Side Raves

3

3.5

SR38Wt. 2.795 kg/m

032

001001

39.5

18

2.54 32

50.96 2.54

06301

SR45Wt. 1.581 kg/m


48

25

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Side Raves

25.4

38.1

SR56Wt. 2.103 kg/m

SR61Wt. 1.796 kg/m

0.3

89.771

3. 201

3.0

0.3

3.18

81.3

38.1

32.941

2.67


62

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Side Raves

89 1

57. 471

3.2

201

201

2.3

SR1PWt. 2.260 kg/m

SR2PWt. 1.783 kg/m

2.75

57.2


48

27

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Side Raves

SR13Wt. 2.220 kg/m

SR20Wt. 2.850 kg/m

63.5

24.89

00.80157.1 3

34.93

33.32

3.18

63.5

57.15

3.20

3.98


28

3 AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Side Guards

SG100Wt. 2.162 kg/m

SGP2Wt. 1.539 kg/m

SG3Wt. 1.819 kg/m

50

941

3.0

05R

100

001

001

001

2.53.0

50

51

0.3


48

29

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Side Guards

SG132Wt. 1.426 kg/m

SGP132Wt. 1.773 kg/m

13

101

101

2.0

31

05R

4ø

SGP4Wt. 1.764 kg/m

30

1.7

57.001

88.549

3.17

104.78

87.401

71.3


30

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Side Guard Assembly

To Suit Single Sideguard2 X SGP132 @ 100mm2 X REC-SGP1322 X EC-SG1324 X M8 x 25mm Cup Square Bolts c/w Nylock Nuts

To Suit Double Sideguard2 X SGP132 @ 500mm2 X REC-SGP1324 X EC-SG1328 X M8 x 25mm Cup Square Bolts c/w Nylock Nuts

Image shows the general configuration forsideguards. The pedestrian pillars are the radiusparts at the front.

REC SGP132

EC SG132

71.3

EC-SG132

REC-SG132Sideguard Pedestrian Kit

Side Guard LegsSGL500/SGL700

M8 Cup SquareCoach Bolts

REC-SGP132

EC-SG132


48

31

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS


3

Corner Pillars

CP14Wt. 1.88 kg/m

111.12

83.2

22.22

31.75

55.28R

22.22

57.13

21.111

CP11Wt. 1.307 kg/m

22.22

22.22 60.43

57.13

34.06

2.36

31.75

57.13R


48

35

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Corner Pillars

CP18Wt. 0.930 kg/m

CP25Wt. 1.100 kg/m

62.8 84

48

8.262.8

2.5

5.42R 52R

CP27Wt. 1.171 kg/m

76.2

473

72 R

2.67

743

76.23

˚09

˚54

3 2.673


63

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Corner Pillars

CP50Wt. 1.509 kg/m

100

001

05R

3.0

511

04

40

115

57R

CP75Wt. 1.652kg/m

3.0


48

37

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Corner Pillars

CP76Wt. 1.137 kg/m

82

23

64.92

52

2.54

22 17

4127

2.54

32

CP77Wt. 1.101 kg/m

31R


83

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Corner Pillars

R127

CP127Wt. 2.298 kg/m

90º

3

04

04

57.532


48

39

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Corner Pillars

CP150Wt. 2.043 kg/m

CP230Wt. 1.238 kg/m

123.82

3.18

28.321

2.67R

05R

100

05


04

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Corner Pillars

CPFT1Wt. 0.926 kg/m

CPFT2Wt. 1.276 kg/m

64

46

81R6

5.2

001

64

2.5

81R

6


48

41

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Corner Pillars – Curtain Sider

CCP50RWt. 4.4047 kg/m

051

55

50

3

5

25

5

4

05R

CCP50FWt. 3.652 kg/m

131

55 6

055

525

8


24

3 AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Corner Pillars – GRP Captive

CCP14Wt. 2.125 kg/m

To suit 14mm GRP

09

90

To suit14mm GRP

To suit14mm GRP

35

2.65 typ

R50

R29.2

511

115

To suit17mm GRP

To suit17mm GRP

35

2.9 typ

R75

R50.7

CCP17Wt. 2.905 kg/m

To suit 17mm GRP


48

43

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS


3

GRP Panels

`

C.P.R. Panels with Plywood core, GRP coating and gelcoat on both sides.

Gelcoat White Polyester Resin

Glasstissue 30g/m2 Plywood: Types CPR CPRS CPRSR

Types CPR CPRS CPRSR WBP Glassfibre g/m2 300 450 840

Glassfibre g/m2 300 450 840 Glasstissue 30g/m2

Polyester Resin Gelcoat white White

STANDARD mm 6 8 10 11 14 17 20 24 27 30WEIGHT kg/m2 CPR 5.5 6.5 8.5 9 11 13 14.5 17 18.5 20.5

WEIGHT kg/m2 CPRS 6.2 7.3 9.1 9.6 12 13.7 15.3 17.6 19.3 21.3

WEIGHT kg/m2 CPRSR 6.8 7.8 9.8 10.3 12.3 14.3 15.8 18.3 19.8 21.8

STANDARD WIDTH 2438mm LENGTH up to 13550mmMAXIMUM WIDTH 3150mm SPECIAL SIZES on request

LENGTH +/– 5mm THICKNESS +/– 1mmWIDTH +/– 3mm DIAGONAL DIFFERENCE +/– 6mm

These panels fulfil the specifications of the NF Standard XP T 57-950-1

Specifications – From the outside to the inside

Thicknesses

Dimensions

Tolerances

Aalco stock of PANOLIT® CPR PanelsThickness Length Width Weight

mm mm mm kg

11 2440 2438 54

11 6096 2438 134

14 2438 2438 65

14 4877 2438 131

14 6096 2438 163

14 7315 2438 196

17 2438 2438 77

17 2743 2438 87

17 3048 2438 97

17 5486 2438 174

17 6096 2438 193

17 6705 2438 213

17 7315 2438 232

17 7925 2438 251

17 8534 2438 270

17 9144 2438 290


48

45

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

GRP Panels

`

NAPS Panels Honeycomb panels with GRP Coating and gelcoat on both sides.

Gelcoat White Polyester Resin

Glasstissue 30g/m2 Honey- Types NAPS NAP6 NAP7

Types NAPS NAP6 NAP7 comb Glassfibre g/m2 450 600 740

Glassfibre g/m2 450 600 740 Glasstissue 30g/m2

Polyester Resin Gelcoat White

STANDARD mm 14 17 20 25 30WEIGHT kg/m2 NAPS 6.7 7.0 7.3 7.7 8.2

WEIGHT kg/m2 NAP6 7.8 8.0 8.2 8.6 9.0

WEIGHT kg/m2 NAP7 8.0 8.3 8.5 9.0 9.3

Coef. of insulation 5.03 4.37 3.66 2.87 2.37w/m2/k (NAPS)

STANDARD WIDTH 2438mm LENGTH up to 13550mmMAXIMUM WIDTH 3150mm SPECIAL SIZES on request

LENGTH +/– 5mm THICKNESS +/– 2mmWIDTH +/– 3mm DIAGONAL DIFFERENCE +/– 6mm

These panels fulfil the specifications of the NF Standard XP T 57-950-1

Specifications – From the outside to the inside

Thicknesses

Dimensions

Tolerances

Aesthetic Appearance: Honeycomb weft may slightly show through on the surface.

GRP Liner PanelsThese light-weight gel-coated GRP Liner Panels are used in a range of applications includingrefrigerated vehicles, camper vans and leisure vehicles.

Aalco stock of NAPS PanelsLength (mm) Width (mm) Thickness (mm) Weight per sheet (kg)

2438 2438 14 39.9

6096 2438 14 99.7

Aalco stock of GRP Liner Panels – 4mm thickLength (mm) Width (mm) Weight per sheet (kg)

2438 2438 34

6096 2438 85


64

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Cant Rail – GRP Captive

CCR14Wt. 1.697 kg/m

To suit 14mm GRP

CCR17Wt. 2.158 kg/m

To suit 17mm GRP

42.5

25

To suit14mmGRP

2.65 typ

2.9 typ

R50

32

32

42.5

R75

25

To suit17mmGRP


48

47

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Cant Rails25.4 25.4

57.13

26.74

2.67R

º88

81.3

CR31Wt. 2.215 kg/m

CR29Wt. 1.278 kg/m

66.67

67.58

28.57

57.13

2.54


84

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Cant Rails

25

100

23

501

CR50Wt. 2.058 kg/m

3.0

05R

To fit Cant Rails

CR25 & CCR25

CR50 & CCR50

RSC01Wt. 0.282 kg/m

33

24

71

4

3.8

84

09

5952

R

23

2.5

CR25Wt. 1.614 kg/m


48

49

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Cant Rails

CR58Wt. 1.695 kg/m

84

25

23

29

3

CR75Wt. 1.666kg/m

115

511

23

20

57R

2515

5.2


05

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Cant Rails

º09

04

CR127Wt. 2.692 kg/m

3

23

02

51 52

721R


48

51

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Cant Rails

CCR50Wt. 4.105 kg/m

25

100

501

3.0

16

324

05R

4

0.323

0.504

CCR60Wt. 3.111 kg/m

25

84

32

14

4

23

04

0229

3


25

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Cant Rails

SCR7Wt. 2.22 kg/m

SCR13Wt. 1.653 kg/m

º48

57.1

3R

4.52

31.75

03

57. 13

5.22

4.52

46. 2

2.032.22

57. 13

4.522.22

˚4808R

31.75 2.64


48

53

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Cant Rails

SCR40Wt. 2.682 kg/m

SCR37Wt. 2.175 kg/m

236.2

50

º5.58

79R001R

40

54

52

25

16

001R

4.79R

03

06

23

61

5.25


45

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Roofing Components

Aluminium Roof Coil2550mm wide x 0.8mm thick.Available in full coil and cut to anylength specified, then recoiled for easytransport and handling.

GRP Roof Coil2550mm wide x 1.3mm thickAvailable in Opal or Blue. 42 metre longcoils that can be cut to any length thenrecoiled and packed for easy transportation.

Pre-Bowed AluminiumRoof SticksSection TH2 (see page 56), 2500mm long with 1” rise.

SealantsParabond 6000 Adhesive/SealantTough, elastic adhesive sealantwith universal applications.Flexible adhesion to most commonmaterials including wood, PVC, glass,mirrors, aluminium, stainless steel, copper.Product is paintable.

Detaflex DL4000 SealantHigh modulus paintablepolyurethane sealant, specificallyformulated for the automotive and truck industry.

Double-Sided TapeDS1619White, high bond strength DS Tapefor a wide range of applications.Bonds well to metals, plastics, etc.

Standard Top HatMaterial: 1.2mm Galvanised Mild SteelWeight: 1.12kg/meterAvailability: Ex-Stock 2.46m 1” Rise

Flanges down.Other lengths made to order.

Steel Top Hats and Roof Sticks

Top HatMaterial: 0.9mm Galvanised Mild SteelWeight: 0.84kg/meterAvailability: Made to order.

Bowler Hat RoofsticksMaterial: 0.9mm Galvanised Mild SteelWeight: 0.78kg/meterAvailability: Made to order. Please specify rise.

63

25

1323

13

25

68

70

38

Roofsticks will normally be supplied pre-bowed with legs on inside radius

Can also be supplied pre-bowed with legs on outside of radius

Rise normally specified over 2.44 metres. Maximum rise 75mm.


48

55

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Top Hats

TH2Wt. 0.777 kg/m

TH5Wt. 0.563 kg/m

TH14Wt. 1.350 kg/m

76.2

111.1

38.1

55.55

66.68

25.4

57.13

32.2285. 82

30. 2

63. 2

3.18

45.230.2

Available as Roof Sticks 2500mmwith 1” rise (see page 55)


65

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Top Hats

60.25

54.4

4

25.4

38.131.75

57.15

69.85

88.51

57.13

38.4

101.6

05.1

53.6

81.3

0 .5

TH16Wt. 0.421 kg/m

TH21Wt. 1.743 kg/m

TH30Wt. 0.830 kg/m

TH26Wt. 0.544 kg/m

81.3

1.58

57.13

83.2

5 0.3

2.54


48

57

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Top Hats

TH13Wt. 1.375kg/m

STH12Wt. 2.016 kg/m

1.83

57.4

57.4

3.96

53.9823.81 23.81

3.96

101.6

NTH100Wt. 0.33 kg/m

25.40

50.80

114.6

91

64

45.3

88.5

1


85

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Top Hats

TH61Wt. 1.508 kg/m

TH90Wt. 2.137 kg/m

3.18

31.75

6.551

32.2288. 51

6.822

32 .228 8.51

31.75

3.18


48

59

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Zeds

4 5.2

81.3

101.6

57.13

57.13

31.75

GZ25Wt. 0.573 kg/m

GZ29Wt. 1.06 kg/m

GZ37Wt. 0.662 kg/m

22.23

22.23

9.6

91

3.0

28.58

04.52

3.18

50.91

GZ19Wt. 0.34 kg/m

2.54

81.3

22.22

57.13

GZ28Wt. 0.55 kg/m

22.22


06

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

48

3

Dropside Sections

51

9

2

002

25DSIP200Wt. 2.613 kg/m

1.8

25

002

28

1.8

25

002

5.15

DSTP200Wt. 2.527 kg/m

22

DSBP200Wt. 3.222 kg/m


48

65

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Dropside Components

DH300WHinge Set

RL694BDropside Lock

SN7Aluminium Gusset 5 mm thick

Gussets and other profiles can becut from Aluminium plate. Shown right our Standard SN7.

AL63 – Fastening Lug

38.1

5.36

12.7

1016.00

165.00


66

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Dropside Pillars

CNR616”, 24” and 32” available 16”, 24” and 32” available

Flush-FitAluminium Sections

JH2Fixed corner pillar and socket

JH1Centre pillar and socket

JH5End Caps – Pair RH & LH

Available in 400mm, 600mmand 800mm – mill finishedor anodised

380

5.25

67

431

CTR7 EC816”, 24” and 32” available


48

67

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Dropside Components

DH300WHinge Set

RL694BDropside Lock

SN7Aluminium Gusset 5 mm thick

Gussets and other profiles can becut from Aluminium plate. Shown right our Standard SN7.


38.1

5.36

12.7

1016.00

165.00


AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

68

Tipper Sections


TS5Wt. 3.413 kg/m

TS4Wt. 2.775 kg/m

RT Channels

76.20

02.67

4.78

80.00

00.021

6.00

6.00

Size (in) Weight per metre (Kg)

4 x 2 x 1⁄4 x 5⁄16 3.765 x 2 x 1⁄4 x 5⁄16 4.205 x 21⁄2 x 1⁄4 x 3⁄8 5.286 x 3 x 1⁄4 x 3⁄8 6.396 x 3 x 3⁄8 x 1⁄2 8.698 x 3 x 3⁄8 x 1⁄2 9.109 x 3 x 3⁄8 x 1⁄2 9.2910 x 3 x 3⁄8 x 1⁄2 10.67


48

69

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Tipper Sections

TS17Wt. 7.283 kg/m

ATP1Wt.14 kg/m

Available in 3 lengths:19ft, 22ft 6in, 23ft

00.05190.00

12.00

85.00

8.00

15.00

40.00

6.00

279.4

972

50.8

88.9 101.6

50.8

88.9

101.6

5.35

10mmRadius

10mmRadius


07

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Tipper Sectionsons

G2Wt. 4.307 kg/m

88

3.5

2.5

87

5.92

121

78

88

121

9 4

3.5

G3Wt. 4.876 kg/m

59

921

5.73

3487

82

3.5

2.5

3.5


48

71

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Tipper Sections

G5Wt. 2.608 kg/m

G6Wt. 2.938 kg/m

G10Wt. 1.355 kg/m

6.502

5.37 / 5 .471 3

25

28.50

07.132

00.32 1

9.00

25.5

56

61

6

43

2.5

2.5

2.5

2.5


27

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Kick Stripsons

GRP15Wt. 0.915 kg/m

KS1Wt. 1.462 kg/m

KS456Wt. 2.321 kg/m

10

50

40

08

2.5

2.3

3.0

4.0

5.82

2

24

052


48

73

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

ABS Plastic is a cost effective alternative to traditionally fitted aluminium castings and is easier toassemble, saving time and money. The caps are essentially an ‘add on’ component and can beeasily replaced in the event of damage. To ensure positive and consistent results the followingprocedures should be followed:

The cap should be checked against the finished roof assembly for orientation and fit.

Both the inside surface of the cap and the adjacent aluminium sections should be abradedlocally along the bold line, (not necessary on anodised aluminium) immediately prior toapplying a one-part adhesive. A bead of 5-6mm diameter applied continuously inside the cap,as shown in Fig.1. The cap should be pressed onto the roof assembly to leave an apparent gapof 2mm between its edgeand the adjacent sections.

Two No. 6 x 15mm long PanHead, Self Tapping Screwsshould be placed throughexisting holes in the verticalcorners of each cap to locateit, whilst the adhesive cures.

No additional beads or filletsof adhesive are necessary ordesirable and no ‘clean-up’should be required.

The cap is intended to fitover any projections on theoutside of the adjacentsections. Do not trim the capto achieve a close fit.

A number of one part sealantadhesives have been tested inbonding ABS to Aluminium,under workshop conditions,and have generally proved tobe satisfactory. Best resultswere obtained from Detaflex4000 which can be suppliedby Aalco.

ABS Cappings

Recommendations for fitting of ABS CappingsRecommendations for fitting of ABS Cappings

Holes forSelf TappingScrews

10

2

Adhesive compressed to approx. 10 x 2mm

Fig. 1

Continuousbead ofadhesiveø5-6mminside cornercap

‘A’ ‘A’

Typical Section ‘AA’ through capbonded to roof and corner pillar

ABS (acrylonitrile-butadiene-styrene) is a leading edge product for the Motor Vehicleindustry. We now offer a range of cappings that are designed to fit our extrusions andgive the benefits of being waterproof, easy to fit, light in weight and consistent both inquality and aesthetics.


47

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Aluminium/ABS Cappings

CC26 – AluminiumHeadboard corner castingsFor use with 3” x 2” x 1/4”angles

CC27 – AluminiumHeadboard corner casting. For use with 3” x 3” x 1/4”angles

CC14 – AluminiumFor use with rubrail TH2 flanged

CC24 – AluminiumFor use with FP15


AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

48

75

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS


CC35 – AluminiumTo suit section TH90

CC38 – AluminiumFor use with TH61

CC28 – AluminiumFor use with TH14


67

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS


CC1001 – ABSCorner Cap


Headbar CR31

Roof SkinCappingM109

To suit Cant Rail/Headbar CR31

Any SquareCorner Pillar

Cant Rail CR31

Corner Pillar CP150

76.2mm Fully Radiused Corner

76.2mm Radius/Square Corner

CC31R – AluminiumTo suit CR31/CP150 Radius Pillar

CC31S – AluminiumTo suit CR31/Any Square Pillar


48

77

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS




To suit Cant Railsand Headbars CR50 or CCR50


50mm Fully Radiused Corner

Headbar CR50

Roof SkinCappingRSC01

Cant RailsCR50 orCCR50

CornerPillar CP50or CP230

CC100 – ABSEnd Cap

End Cap for 100 x 50 Side Guard Sections

Side GuardsSG100 or SG3

CC1011 – ABSCorner Cap for SG2

(Top and Bottom)


87

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS


Headbar CR25


For use withCant Rails CR25, CR58


Roof SkinCappingRSC01

Cant Rail

To suit Cant Railsand HeadbarsCR25, CR58,CCR60


CornerPillar CP25

25mm Fully Radiused Corner


48

79

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS


CC127R – AluminiumTo suit CR127 and CP127Radius Pillars

CCP14R for 14mm GRP and CCP17R for 17mm GRPTo suit CCR14, CCR17, CCP14 and CCP17 and any Radiused Corner Pillar

CCP14S for 14mm GRP and CCP17S for 17mm GRPTo suit CCR14 and CCR17 andany Square Corner Pillar

GRP Captive Aluminium Corner Castings

CC127S – AluminiumTo suit CR127 and Any Square Pillar


08

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS


CCP14S for 14mm GRP and CCP17S for 17mm GRPTo suit CCR14 and CCR17 andany Square Corner Pillar

CC9 – AluminiumTo suit CR29 and any Square Pillar

CC15 – AluminiumTo suit CR29, CP18


48

81

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS


CC36 – AluminiumTo suit CPFT2

CC80 – AluminiumTo suit CPFT1


28

3

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Bulkheads52

422

VC100Wt. 2.311 kg/m

LM/BHP01Wt. 1.212 kg/m

LM/BH101Wt. 0.659 kg/m

24

511

24

7.401


48

83

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Steel Sections

48

Steel Fabrication – Dimensions and Lengths to order.

Outer Panel Inner Panel Header

Floor Pan End Capping


AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Steel SectionsDimensions and Lengths to order.

Rear Frame Sections

Rear Header Sections


48

85

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

Steel Sections

Galvanised Steel Back Frames64

38

6

10

Material 2.0mm Galvanised Mild SteelWeight 0.84 kg/m

127.0

46.00

00.101

31.7589.621

00.8

1

00.8

1

279.00

00.05

19.00

00.0

5

50.00

102.00

00.721

Curtain Track

Back Bearer

Header Panel

Corner Pillar

Curtainsider Pillars – Dimensions and Lengths to order.


68

AM

AR

I TR

AN

SPO

RT P

RO

DU

CTS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .

AMARI TRANSPORT PRODUCTSUnit 26Gravelly Industrial ParkTyburn RoadBirminghamB24 8HZUK

Phone: +44 (0) 121 327 7777Fax: +44 (0) 121 327 4461Email: [email protected]

www.amaritransport.com

Documents

Contents Products Dia Weight (in) per metre (Kg) 1⁄ 4 0.09 5⁄ 16 0.13 3⁄ 8 0.19 7⁄ 16 0.26 1⁄ 2 0.34 9⁄ 16 0.43 5⁄ 8 0.54 16mm 0.54 11⁄ 16 0.65 3⁄ 4 0.77 20mm 0.85