Upload
hendra-jurbon
View
241
Download
2
Embed Size (px)
Citation preview
8/17/2019 Production and Test Packer - Retrievable
1/30
8/17/2019 Production and Test Packer - Retrievable
2/30
8/17/2019 Production and Test Packer - Retrievable
3/30
8/17/2019 Production and Test Packer - Retrievable
4/30
PRODUCTION AND TEST PACKER RETRIEVABLE
____________________________________________________
BOTIL MODEL “BM” MECHANICALSET PACKER
Product No. BI 643-01
DESCRIPTION & APPLICATIONThe BOTIL Model “BM” is mechanical setretrievable high performance productionPacker. It is designed to meet the demandsof high pressure fracturing procedures, aswell as production applications. The Packer is set in compression, allowing finalpositioning in compression, tension or neutral.
FEATURES/BENEFITS
Ease of setting and release, onefourth turn right-hand rotation to set,one – forth right-hand rotation torelease
Superior sealing system with threeelement stack
Independent lower and upper Jay Assemblies contributing to short,compact design
No O-ring required
Built in un loader with bonded deal
for bypass Bypass opens before release of
upper slips for safety and ease of release
Rated to 10,000 psi @ 350°F
Fully tested in minimum to maximum API tolerances for each specifiedcasing weight
Temperature tested with multiplePressure reversals
Tension loads compatible with
tubing string @ 10,000 psi Staged upper slip release with solid
upper cone
Full tubing ID Packer bore
SPECIFICATION GUIDECasing Packer Casing
OD Weight
Range
Packer
Size
Gage
Ring OD
Packer
I.D.
Min ID Max ID
In. mm (lb/ft) In. In. In. In.
5-1/2” 139.720-23 45A2 4.500
2.375
4.578 4.86817-20 45A4 4.600 4.696 4.976
15.5-17 45B 4.720 4.819 5.031
7” 177.8
26-29 47B2 6.174 6.174 6.381
23-26 47B4 6.256 6.266 6.466
20-23 47B 6.239 6.239 6.570
62.I
8/17/2019 Production and Test Packer - Retrievable
5/30
PRODUCTION AND TEST PACKER RETRIEVABLE
____________________________________________________
BOTIL MODEL “BTCN” MECHANICALSET PACKER
Product No. BI 643-02
DESCRIPTION & APPLICATION
The Botil Model “BTCN” RetrievableProduction Packer meets severalzone isolation, production, andinjection requirements. Full openingdesign gives unrestricted flow andallows Wireline tools to pass.Mechanical lock-setting action holds
substantial pressure from above orbelow without tubing weight ortension. No hydraulic anchor isrequired to prevent packer movement,even with differential pressures.Packer’s ability to absorb tubingexpansion or contraction forcesmakes the “BTCN” right for bothpumping and injection wells. The largeinternal bypass reduces swabbingeffect when running-in or retrieving.
When packer is set, by pass isautomatically sealed. The “BTCN”also features of upper slip releasingsystem that reduces the strainrequired to release the slips bydislocating a key non-directional slipfirst which automatically releases theother slips. this mechanical featurereplaces the hold down system foundin other tools making it independent ofpressure variations.
FEATURE & BENEFITS:
Tension set for shallowapplications
Three assemblies areavailable; small bore, largebore and high pressure
Can leave the tubing in atension, compression or neutral
condition
Holds pressure from above orbelow
Right hand set, right hand
release jay setting and releasing
mechanism
internal by-pass
internal pressure unloader sealis located below the upperslips; this allows debris to beflushed away from hold-downslips before releasing
8/17/2019 Production and Test Packer - Retrievable
6/30
PRODUCTION AND TEST PACKER RETRIEVABLE
____________________________________________________
SPECIFICATION GUIDE
CASINGCASING ID
RANGEMAX
ODOF
TOOL
PACKE
R
BORE
THREAD
CONNECTIO
NBOX UP/
PIN DOWN
PACKERSIZE
SIZE
WEIGHT
(LBS/FT)
MIN
(IN)
MA
X
(IN)
5 1/2
20-23 4.629 4.852 4.5002.000 2 3/8 EU 8 RD
450-200
14-17 4.851 5.0754.625
462-200
15.5-17 4.851 5.0162.375 2 7/8 EU 8 RD
462-237
20-23 4.629 4.852 4.500 450-237
7
29-35 5.952 6.237 5.812
2.500 2 7/8 EU 8 RD
581-250
26-32 6.042 6.342 5.875 587-250
17-26 6.224 6.611 6.000 600-250
26-32 6.042 6.361 5.8753.000 3 1/2 EU 8 RD
587-300
17-26 6.224 6.611 6.000 600-300
9 5/843.5-53.5 8.463 8.866 8.250
4.000 4 1/2 EU 8 RD825-400
32.3-43.5 8.683 9.101 8.500 850-400
8/17/2019 Production and Test Packer - Retrievable
7/30
PRODUCTION AND TEST PACKER RETRIEVABLE
____________________________________________________
BOTIL MODEL “ BTCN-1”MECHANICAL SET PACKERProduct No. BI 643-03
DESCRIPTION & APPLICATION
The Botil Model “BTCN-1” RetrievableProduction Packer meets severalzone isolation, production, andinjection requirements. Full openingdesign gives unrestricted flow andallows Wireline tools to pass.Mechanical lock-setting action holdssubstantial pressure from above orbelow without tubing weight or
tension. No hydraulic anchor isrequired to prevent packer movement,even with differential pressures.Packer’s ability to absorb tubingexpansion or contraction forcesmakes the “BTCN-1” right for bothpumping and injection wells. The largeinternal bypass reduces swabbingeffect when running-in or retrieving.When packer is set, by pass isautomatically sealed. The “BTCN-1”also features of upper slip releasingsystem that reduces the strainrequired to release the slips bydislocating a key non-directional slipfirst which automatically releases theother slips. this mechanical featurereplaces the hold down system foundin other tools making it independent ofpressure variations.
FEATURE & BENEFITS:
Tension set for shallowapplications
Three assemblies areavailable; small bore, largebore and high pressure
Can leave the tubing in atension, compression or neutralcondition
Holds pressure from above or
below
Right hand set, right handrelease
jay setting and releasingmechanism
internal by-pass
internal pressure unloader sealis located below the upperslips; this allows debris to beflushed away from hold-downslips before releasing
8/17/2019 Production and Test Packer - Retrievable
8/30
PRODUCTION AND TEST PACKER RETRIEVABLE
____________________________________________________
SPECIFICATION GUIDE
CASING CASING IDRANGE MAXOD
OF
TOOL
PACKE
R
BORE
THREADCONNECTIO
N
BOX UP/
PIN DOWN
PACKER
SIZESIZE
WEIGHT
(LBS/FT)
MIN
(IN)
MA
X
(IN)
5 1/2
20-23 4.629 4.852 4.5002.000 2 3/8 EU 8 RD
450-200
14-17 4.851 5.0754.625
462-200
15.5-17 4.851 5.0162.375 2 7/8 EU 8 RD
462-237
20-23 4.629 4.852 4.500 450-237
7
29-35 5.952 6.237 5.812
2.500 2 7/8 EU 8 RD
581-250
26-32 6.042 6.342 5.875 587-250
17-26 6.224 6.611 6.000 600-250
26-32 6.042 6.361 5.8753.000 3 1/2 EU 8 RD
587-300
17-26 6.224 6.611 6.000 600-300
9 5/843.5-53.5 8.463 8.866 8.250
4.000 4 1/2 EU 8 RD825-400
32.3-43.5 8.683 9.101 8.500 850-400
8/17/2019 Production and Test Packer - Retrievable
9/30
8/17/2019 Production and Test Packer - Retrievable
10/30
8/17/2019 Production and Test Packer - Retrievable
11/30
8/17/2019 Production and Test Packer - Retrievable
12/30
8/17/2019 Production and Test Packer - Retrievable
13/30
8/17/2019 Production and Test Packer - Retrievable
14/30
8/17/2019 Production and Test Packer - Retrievable
15/30
MODEL ‘BHRL’ HYDRAULIC RETRIEVABLE PACKER
MODEL ‘BHRL’ HYDRAULIC RETRIEVABLE PACKER
PRODUCT No. BI 646-90
DESCRIPTION:Botil Model ‘BHRL’ is a hydraulically set, straight-pull, shear releaseretrievable packer. It is used in vertical and deviated wellbore or inapplication in which single or multiple packers are set after the wellheadhas been installed. A modular shell and body design for low to mediumpressure differentials allows configuration as a single-string productionpacker. Its compact, modular design makes the BHRL an economicalchoice for production applications.
The BHRL is installed with the completion tubing and is set by applyingpressure to the tubing. Retrieval of the BHRL is accomplished with a
straight upward pull on the tubing. Once the tension on the tubing stringexceeds the shear value of the release pins, the slips disengage the casing,and the element relaxes. Set at the factory to a standard value, the packer-shear release mechanism can be adjusted in the field just beforeinstallation.
FEATURES:
• No Tubing Manipulation required while setting of the Packer. The Packercan be set after the well is flanged up and the tubing is displaced.
• Opposed Double grip slips (Bi-Directional) prevent movement of the
Packer in either direction due to pressure differentials.• Large Flow Path ID.• Straight pull shear release.• Adjustable shear release.• Field proven sealing element• Minimized end effect on shear-release screws.• Slips located below the Packing Elements.• Double Piston design prevents tubing movement while setting.• Double Lock ring sustain Pack-off and Slip grip mechanically after setting.
BENEFITS:
• Simplified operations reduce rig costs.• Eliminates tubing movement during installation.• Prevents debris build up above slips.• Facilitates circulating out debris before retrieval.• Positive casing grip secures packer.
68.I
8/17/2019 Production and Test Packer - Retrievable
16/30
MODEL ‘BHRL’ HYDRAULIC RETRIEVABLE PACKER
APPLICATIONS:
• Single string completion
• Zonal Isolation.• Vertical, deviated or horizontal well bores.
SPECIFICATION GUIDE:
CasingSize
CasingWeight
Max O.D Packer I.D* * DifferentialRating(Psi)
Min. tubingSetting
Pressure(psi)
7 23-26 6.090 2.426,2.992 7,000
35007 26-29 6.000 2.426,2.992 7,000
7 29-32 5.910 2.426,2.992 7,0007 32-35 5.850 2.426,2.992 7,000
7 5/8 24-29.7 6.690 2.992 7,00030007 5/8 33.7-39 6.440 2.992 7,000
9 5/8 40-47 8.463 2.992,3.910,4.733 7,00030009 5/8 47-53.5 8.354 2.929,3.910,4.733 7,000
** I.D may vary depending on End connection selected.
68.II
8/17/2019 Production and Test Packer - Retrievable
17/30
8/17/2019 Production and Test Packer - Retrievable
18/30
8/17/2019 Production and Test Packer - Retrievable
19/30
8/17/2019 Production and Test Packer - Retrievable
20/30
8/17/2019 Production and Test Packer - Retrievable
21/30
8/17/2019 Production and Test Packer - Retrievable
22/30
8/17/2019 Production and Test Packer - Retrievable
23/30
8/17/2019 Production and Test Packer - Retrievable
24/30
8/17/2019 Production and Test Packer - Retrievable
25/30
8/17/2019 Production and Test Packer - Retrievable
26/30
8/17/2019 Production and Test Packer - Retrievable
27/30
8/17/2019 Production and Test Packer - Retrievable
28/30
8/17/2019 Production and Test Packer - Retrievable
29/30
8/17/2019 Production and Test Packer - Retrievable
30/30