Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
PRODUCT DATASHEETConfidex
Washable s
non
Device type
Air interface protocol
Operational frequency
IC type
Memory configuration
Read range
Applicable surface materials
* Read ranges are theoretical values that are calculated for non
environment, in where
maximum allowed operating power according to ETSI EN 302 208 (2W
ERP).
may have an effect on performance.
1/
PRODUCT DATASHEETConfidex
Washable s
non-
ELECTRICAL SPECIFICATION
Device type
Class 1 Generation 2
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
Global
IC type
NXP UCODE G2iL
Memory configuration
EPC
Read range
EU
EU
US
US on cardboard up to 2,5
Applicable surface materials
non
* Read ranges are theoretical values that are calculated for non
environment, in where
maximum allowed operating power according to ETSI EN 302 208 (2W
ERP).
may have an effect on performance.
RADIATION PATTERNS
/2
PRODUCT DATASHEETConfidex
Washable s
-metallic surfaces.
ELECTRICAL SPECIFICATION
Device type
Class 1 Generation 2
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
Global
IC type
NXP UCODE G2iL
Memory configuration
EPC 128 bi
Read range
EU on
EU on cardboard up to 2
US on plastic
US on cardboard up to 2,5
Applicable surface materials
non-metallic surfaces
* Read ranges are theoretical values that are calculated for non
environment, in where
maximum allowed operating power according to ETSI EN 302 208 (2W
EU = 865
may have an effect on performance.
RADIATION PATTERNS
PRODUCT DATASHEETConfidex
Washable s
metallic surfaces.
ELECTRICAL SPECIFICATION
Device type
Class 1 Generation 2
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
Global 860
NXP UCODE G2iL
Memory configuration
128 bi
Read range
on plastic
on cardboard up to 2
plastic
US on cardboard up to 2,5
Applicable surface materials
metallic surfaces
* Read ranges are theoretical values that are calculated for non
environment, in where
maximum allowed operating power according to ETSI EN 302 208 (2W
EU = 865
may have an effect on performance.
RADIATION PATTERNS
PRODUCT DATASHEETConfidex
Washable small
metallic surfaces.
ELECTRICAL SPECIFICATION
Device type
Class 1 Generation 2
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
0-930
NXP UCODE G2iL
Memory configuration
128 bit; TID 64 bit
Read range (2W ERP)
plastic
on cardboard up to 2
plastic
US on cardboard up to 2,5
Applicable surface materials
metallic surfaces
* Read ranges are theoretical values that are calculated for non
environment, in where
maximum allowed operating power according to ETSI EN 302 208 (2W
EU = 865-868 MHz, US = 902
may have an effect on performance.
RADIATION PATTERNS
PRODUCT DATASHEETConfidex Carrier Micro
mall-
metallic surfaces.
ELECTRICAL SPECIFICATION
Class 1 Generation 2
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
30MHz
NXP UCODE G2iL
Memory configuration
t; TID 64 bit
(2W ERP)
up to 4 m / 13 ft
on cardboard up to 2
up to
US on cardboard up to 2,5
Applicable surface materials
metallic surfaces
* Read ranges are theoretical values that are calculated for non
environment, in where
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902
may have an effect on performance.
RADIATION PATTERNS
PRODUCT DATASHEETCarrier Micro
-sized
metallic surfaces.
ELECTRICAL SPECIFICATION
Class 1 Generation 2
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
MHz
NXP UCODE G2iLTM
Memory configuration
t; TID 64 bit
(2W ERP)
up to 4 m / 13 ft
on cardboard up to 2
up to 3,5
US on cardboard up to 2,5
Applicable surface materials
metallic surfaces
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902
may have an effect on performance.
RADIATION PATTERNS
PRODUCT DATASHEETCarrier Micro
sized special label with strong grip on
metallic surfaces.
ELECTRICAL SPECIFICATION
Class 1 Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
MHz
Memory configuration
t; TID 64 bit
(2W ERP)*
up to 4 m / 13 ft
on cardboard up to 2
3,5 m / 1
US on cardboard up to 2,5
Applicable surface materials
metallic surfaces
* Read ranges are theoretical values that are calculated for non
antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902
may have an effect on performance.
RADIATION PATTERNS
PRODUCT DATASHEETCarrier Micro
special label with strong grip on
ELECTRICAL SPECIFICATION
passive UHF RFID transponder
EPCGlobal Class1 Gen2 ISO 18000
up to 4 m / 13 ft
on cardboard up to 2 m /
m / 1
US on cardboard up to 2,5
Applicable surface materials
* Read ranges are theoretical values that are calculated for non
antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902
may have an effect on performance.
RADIATION PATTERNS
PRODUCT DATASHEETCarrier Micro
special label with strong grip on
ELECTRICAL SPECIFICATION
passive UHF RFID transponder
EPCGlobal Class1 Gen2 ISO 18000
up to 4 m / 13 ft
m / 6.
m / 11.5
m /
Applicable surface materials*
* Read ranges are theoretical values that are calculated for non
antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902 – 928 MHz.
may have an effect on performance.
PRODUCT DATASHEETCarrier Micro
special label with strong grip on
ELECTRICAL SPECIFICATION
passive UHF RFID transponder
EPCGlobal Class1 Gen2 ISO 18000
up to 4 m / 13 ft
6.5 ft
1.5 ft
m / 8 ft
* Read ranges are theoretical values that are calculated for non
antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
928 MHz.
PRODUCT DATASHEETCarrier Micro™
special label with strong grip on
passive UHF RFID transponder
EPCGlobal Class1 Gen2 ISO 18000-6C
5 ft
ft
ft
* Read ranges are theoretical values that are calculated for non
antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
928 MHz.
PRODUCT DATASHEET™
special label with strong grip on
passive UHF RFID transponder
6C
* Read ranges are theoretical values that are calculated for non
antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials
contact@confidex.
PRODUCT DATASHEET
special label with strong grip on
passive UHF RFID transponder
* Read ranges are theoretical values that are calculated for non
antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials
contact@confidex.
PRODUCT DATASHEET
special label with strong grip on
passive UHF RFID transponder
* Read ranges are theoretical values that are calculated for non
antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials
contact@confidex.
special label with strong grip on
passive UHF RFID transponder
* Read ranges are theoretical values that are calculated for non
antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials
contact@confidex.
special label with strong grip on
passive UHF RFID transponder
* Read ranges are theoretical values that are calculated for non-reflective
antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials
© Confidex 2012
contact@confidex.
special label with strong grip on
reflective
antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials
© Confidex 2012
01
contact@confidex.
special label with strong grip on
reflective
antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials
© Confidex 2012
01-201
© Confidex 2012
2013
com www.confidex.com
© Confidex 2012
3
www.confidex.com
MECHANICAL SPECIFICATION
Tag materials
Printable white PET
Background adhesive
High performance acrylic adhesive
surface energy plastics
Weight
0,1
Delivery format
On reel
Amoun
20
Pitch on reel
20,32 mm / 0,8”
Reel core inner diameter
76 mm / 3”
Tag d
40
ENVIRONMENTAL RESISTANCE
Operating temperature
-35°C to +85°C /
Ambient temperature
-35°C to +90
Water resistance
Good, tested 5 hours in 1m deep water (IP68)
Washing resistance
Good
Chemical resistance
No physical or performance changes in:
-
-
-
-
-
Storage condition
1 year
Expected lifetime
Years in normal operating conditions
Values in
environmental conditions depends on the combination of all influencing
factors,
final suitability for certain environmental
be tested.
© Confidex 2012
www.confidex.com
MECHANICAL SPECIFICATION
Tag materials
Printable white PET
Background adhesive
High performance acrylic adhesive
surface energy plastics
Weight
0,1 g
Delivery format
On reel
Amoun
2000
Pitch on reel
20,32 mm / 0,8”
Reel core inner diameter
76 mm / 3”
Tag dimensions
40 x
ENVIRONMENTAL RESISTANCE
Operating temperature
35°C to +85°C /
Ambient temperature
35°C to +90
Water resistance
Good, tested 5 hours in 1m deep water (IP68)
Washing resistance
Good
Chemical resistance
No physical or performance changes in:
168h
168h
24h
24h
30min
Storage condition
1 year
Expected lifetime
Years in normal operating conditions
Values in
environmental conditions depends on the combination of all influencing
factors,
final suitability for certain environmental
be tested.
www.confidex.com
MECHANICAL SPECIFICATION
Tag materials
Printable white PET
Background adhesive
High performance acrylic adhesive
surface energy plastics
Weight
g
Delivery format
On reel
Amount on reel
00 pcs
Pitch on reel
20,32 mm / 0,8”
Reel core inner diameter
76 mm / 3”
imensions
x 10 x
ENVIRONMENTAL RESISTANCE
Operating temperature
35°C to +85°C /
Ambient temperature
35°C to +90
Water resistance
Good, tested 5 hours in 1m deep water (IP68)
Washing resistance
Good
Chemical resistance
No physical or performance changes in:
168h Salt water (salinity 10%)
168h Motor oil
24h NaOH (10%, pH 13)
24h Sulfuric acid (10%, pH 2)
30min
Storage condition
1 year in +20°C / 50% RH (shelf life for adhesive)
Expected lifetime
Years in normal operating conditions
Values in the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
factors, exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental
be tested. Contact Confidex for more specific information.
www.confidex.com
MECHANICAL SPECIFICATION
Tag materials
Printable white PET
Background adhesive
High performance acrylic adhesive
surface energy plastics
Delivery format
t on reel
pcs
Pitch on reel
20,32 mm / 0,8”
Reel core inner diameter
76 mm / 3”
imensions
x 0,2
ENVIRONMENTAL RESISTANCE
Operating temperature
35°C to +85°C /
Ambient temperature
35°C to +90
Water resistance
Good, tested 5 hours in 1m deep water (IP68)
Washing resistance
Chemical resistance
No physical or performance changes in:
Salt water (salinity 10%)
Motor oil
NaOH (10%, pH 13)
Sulfuric acid (10%, pH 2)
30min Acetone
Storage condition
in +20°C / 50% RH (shelf life for adhesive)
Expected lifetime
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental
Contact Confidex for more specific information.
www.confidex.com
MECHANICAL SPECIFICATION
Tag materials
Printable white PET
Background adhesive
High performance acrylic adhesive
surface energy plastics
Delivery format
t on reel
Pitch on reel
20,32 mm / 0,8”
Reel core inner diameter
76 mm / 3”
imensions
0,2 mm
ENVIRONMENTAL RESISTANCE
Operating temperature
35°C to +85°C /
Ambient temperature
35°C to +90°C
Water resistance
Good, tested 5 hours in 1m deep water (IP68)
Washing resistance
Chemical resistance
No physical or performance changes in:
Salt water (salinity 10%)
Motor oil
NaOH (10%, pH 13)
Sulfuric acid (10%, pH 2)
Acetone
Storage condition
in +20°C / 50% RH (shelf life for adhesive)
Expected lifetime
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental
Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
Printable white PET
Background adhesive
High performance acrylic adhesive
surface energy plastics
Delivery format
t on reel
20,32 mm / 0,8”
Reel core inner diameter
mm
ENVIRONMENTAL RESISTANCE
Operating temperature
35°C to +85°C / -31
Ambient temperature
°C /-31
Water resistance
Good, tested 5 hours in 1m deep water (IP68)
Washing resistance
Chemical resistance
No physical or performance changes in:
Salt water (salinity 10%)
Motor oil exposure
NaOH (10%, pH 13)
Sulfuric acid (10%, pH 2)
Acetone exposure
Storage condition
in +20°C / 50% RH (shelf life for adhesive)
Expected lifetime
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental
Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
Printable white PET, resin ribbon is recommended
Background adhesive
High performance acrylic adhesive
surface energy plastics
Reel core inner diameter
/ 1.57 x 0.39 x 0.01
ENVIRONMENTAL RESISTANCE
Operating temperature
31°F to +185°F
Ambient temperature
31°F to +194
Good, tested 5 hours in 1m deep water (IP68)
Washing resistance
Chemical resistance
No physical or performance changes in:
Salt water (salinity 10%)
exposure
NaOH (10%, pH 13)
Sulfuric acid (10%, pH 2)
exposure
in +20°C / 50% RH (shelf life for adhesive)
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental
Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
, resin ribbon is recommended
High performance acrylic adhesive
surface energy plastics
Reel core inner diameter
1.57 x 0.39 x 0.01
ENVIRONMENTAL RESISTANCE
Operating temperature
°F to +185°F
°F to +194
Good, tested 5 hours in 1m deep water (IP68)
No physical or performance changes in:
Salt water (salinity 10%)
exposure
NaOH (10%, pH 13)
Sulfuric acid (10%, pH 2)
exposure
in +20°C / 50% RH (shelf life for adhesive)
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental
Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
, resin ribbon is recommended
High performance acrylic adhesive
1.57 x 0.39 x 0.01
ENVIRONMENTAL RESISTANCE
°F to +185°F
°F to +194
Good, tested 5 hours in 1m deep water (IP68)
No physical or performance changes in:
Salt water (salinity 10%)
exposure
NaOH (10%, pH 13) exposure
Sulfuric acid (10%, pH 2)
exposure
in +20°C / 50% RH (shelf life for adhesive)
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental
Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
, resin ribbon is recommended
High performance acrylic adhesive
1.57 x 0.39 x 0.01
ENVIRONMENTAL RESISTANCE
°F to +185°F
°F to +194°F
Good, tested 5 hours in 1m deep water (IP68)
No physical or performance changes in:
Salt water (salinity 10%)
exposure
Sulfuric acid (10%, pH 2) exposure
in +20°C / 50% RH (shelf life for adhesive)
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental
Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
, resin ribbon is recommended
High performance acrylic adhesive
1.57 x 0.39 x 0.01
ENVIRONMENTAL RESISTANCE
°F to +185°F
°F
Good, tested 5 hours in 1m deep water (IP68)
No physical or performance changes in:
exposure
exposure
exposure
in +20°C / 50% RH (shelf life for adhesive)
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental conditions is recommended to
Contact Confidex for more specific information.
, resin ribbon is recommended
High performance acrylic adhesive specifically for low
1.57 x 0.39 x 0.01
Good, tested 5 hours in 1m deep water (IP68)
No physical or performance changes in:
exposure
exposure
exposure
in +20°C / 50% RH (shelf life for adhesive)
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
conditions is recommended to
Contact Confidex for more specific information.
, resin ribbon is recommended
specifically for low
in
Good, tested 5 hours in 1m deep water (IP68)
No physical or performance changes in:
exposure
exposure
in +20°C / 50% RH (shelf life for adhesive)
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
conditions is recommended to
Contact Confidex for more specific information.
, resin ribbon is recommended
specifically for low
Good, tested 5 hours in 1m deep water (IP68)
in +20°C / 50% RH (shelf life for adhesive)
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
conditions is recommended to
Contact Confidex for more specific information.
, resin ribbon is recommended
specifically for low
Good, tested 5 hours in 1m deep water (IP68)
in +20°C / 50% RH (shelf life for adhesive)
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
conditions is recommended to
Contact Confidex for more specific information.
, resin ribbon is recommended
specifically for low
in +20°C / 50% RH (shelf life for adhesive)
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
conditions is recommended to
specifically for low
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
conditions is recommended to
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
conditions is recommended to
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
conditions is recommended to
Pre
Customized
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
like shown in picture below.
Ideal
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
hours after the installation. B
improved
dry the surface for obtaining the maximum bond strength.
During Carrier
please avoid touching the background adhesive. If the
location on the asset needs to be changed, please use a
new tag instead
will suffer from the re
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
limit.
sensitive electric
unexpected pressure is applied on the chip.
2/
PERSONALIZATION OPTIONS
Pre-encoding
•
Customized
•
INSTALLATION INSTRUCTIONS
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
like shown in picture below.
Ideal
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
hours after the installation. B
improved
dry the surface for obtaining the maximum bond strength.
During Carrier
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
new tag instead
will suffer from the re
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
limit.
sensitive electric
unexpected pressure is applied on the chip.
/2
PERSONALIZATION OPTIONS
encoding
•
Customized
•
INSTALLATION INSTRUCTIONS
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
like shown in picture below.
Ideal installation conditions are
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
hours after the installation. B
improved
dry the surface for obtaining the maximum bond strength.
During Carrier
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
new tag instead
will suffer from the re
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
limit. Never touch on the location of the IC. IC chip is
sensitive electric
unexpected pressure is applied on the chip.
PERSONALIZATION OPTIONS
encoding
Customer specific encoding of EPC or user
memory. Locking
Customized
Customer
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
like shown in picture below.
installation conditions are
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
hours after the installation. B
improved with firm application pressure. Al
dry the surface for obtaining the maximum bond strength.
During Carrier
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
new tag instead
will suffer from the re
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
sensitive electric
unexpected pressure is applied on the chip.
PERSONALIZATION OPTIONS
encoding
Customer specific encoding of EPC or user
memory. Locking
Customized printing
Customer
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
like shown in picture below.
installation conditions are
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
hours after the installation. B
with firm application pressure. Al
dry the surface for obtaining the maximum bond strength.
During Carrier
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
new tag instead
will suffer from the re
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
sensitive electric
unexpected pressure is applied on the chip.
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
memory. Locking
printing
Customer
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
like shown in picture below.
installation conditions are
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
hours after the installation. B
with firm application pressure. Al
dry the surface for obtaining the maximum bond strength.
During Carrier Micro
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
new tag instead of re
will suffer from the re
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
sensitive electrical component and can be damaged if
unexpected pressure is applied on the chip.
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
memory. Locking
printing
Customer specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
like shown in picture below.
installation conditions are
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
hours after the installation. B
with firm application pressure. Al
dry the surface for obtaining the maximum bond strength.
Micro
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
of re
will suffer from the re
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
al component and can be damaged if
unexpected pressure is applied on the chip.
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
memory. Locking
specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
Tag
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
like shown in picture below.
installation conditions are
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
hours after the installation. B
with firm application pressure. Al
dry the surface for obtaining the maximum bond strength.
Micro attachment to the identified asset,
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
of re-placing the used one; the adhesion
will suffer from the re-placement.
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
al component and can be damaged if
unexpected pressure is applied on the chip.
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
memory. Locking permanently or with password
specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
Tag polarization
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
like shown in picture below.
installation conditions are
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
hours after the installation. B
with firm application pressure. Al
dry the surface for obtaining the maximum bond strength.
attachment to the identified asset,
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
placing the used one; the adhesion
placement.
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
al component and can be damaged if
unexpected pressure is applied on the chip.
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
permanently or with password
specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
polarization
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
like shown in picture below.
installation conditions are
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
hours after the installation. B
with firm application pressure. Al
dry the surface for obtaining the maximum bond strength.
attachment to the identified asset,
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
placing the used one; the adhesion
placement.
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
al component and can be damaged if
unexpected pressure is applied on the chip.
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
permanently or with password
specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
polarization
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
installation conditions are +2
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
hours after the installation. B
with firm application pressure. Al
dry the surface for obtaining the maximum bond strength.
attachment to the identified asset,
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
placing the used one; the adhesion
placement.
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
al component and can be damaged if
unexpected pressure is applied on the chip.
Customer specific encoding of EPC or user
permanently or with password
specific layout including logo, text,
INSTALLATION INSTRUCTIONS
polarization
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
+20°C
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
hours after the installation. Bond strength can be
with firm application pressure. Al
dry the surface for obtaining the maximum bond strength.
attachment to the identified asset,
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
placing the used one; the adhesion
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
al component and can be damaged if
unexpected pressure is applied on the chip.
Customer specific encoding of EPC or user
permanently or with password
specific layout including logo, text,
polarization
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
°C (+68
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
ond strength can be
with firm application pressure. Al
dry the surface for obtaining the maximum bond strength.
attachment to the identified asset,
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
placing the used one; the adhesion
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
al component and can be damaged if
unexpected pressure is applied on the chip.
contact@confidex.
Customer specific encoding of EPC or user
permanently or with password
specific layout including logo, text,
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
position, where the structure of the identified asset
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
(+68
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
ond strength can be
with firm application pressure. Always clean and
dry the surface for obtaining the maximum bond strength.
attachment to the identified asset,
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
placing the used one; the adhesion
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
al component and can be damaged if
unexpected pressure is applied on the chip.
contact@confidex.
Customer specific encoding of EPC or user
permanently or with password
specific layout including logo, text,
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
identified asset
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
(+68°F) / 50% RH.
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
ond strength can be
ways clean and
dry the surface for obtaining the maximum bond strength.
attachment to the identified asset,
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
placing the used one; the adhesion
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
al component and can be damaged if
contact@confidex.
Customer specific encoding of EPC or user
permanently or with password
specific layout including logo, text,
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
identified asset
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
) / 50% RH.
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
ond strength can be
ways clean and
dry the surface for obtaining the maximum bond strength.
attachment to the identified asset,
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
placing the used one; the adhesion
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
al component and can be damaged if
contact@confidex.
Customer specific encoding of EPC or user
permanently or with password
specific layout including logo, text,
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
identified asset
provides protection against mechanical stresses such as
impacts or jet streams. There’s no need for line of
between reader and label so it can be installed for example
) / 50% RH.
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
ond strength can be
ways clean and
dry the surface for obtaining the maximum bond strength.
attachment to the identified asset,
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
placing the used one; the adhesion
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
al component and can be damaged if
© Confidex 2012
contact@confidex.
permanently or with password.
specific layout including logo, text,
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
identified asset
provides protection against mechanical stresses such as
sight
between reader and label so it can be installed for example
) / 50% RH.
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
ond strength can be
ways clean and
dry the surface for obtaining the maximum bond strength.
attachment to the identified asset,
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
placing the used one; the adhesion
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
al component and can be damaged if
© Confidex 2012
01
contact@confidex.
.
While planning the installation, most recommended
location for the Confidex Carrier Micro™ label is in a
identified asset
provides protection against mechanical stresses such as
sight
between reader and label so it can be installed for example
) / 50% RH.
For exceptional conditions, please contact Confidex.
Adhesive of the label will provide best adhesion in 24
ond strength can be
ways clean and
dry the surface for obtaining the maximum bond strength.
attachment to the identified asset,
please avoid touching the background adhesive. If the
ocation on the asset needs to be changed, please use a
placing the used one; the adhesion
Minimum bending diameter of the Confidex Carrier is
defined to be 50mm. Do not bend the label above the
Never touch on the location of the IC. IC chip is
al component and can be damaged if
© Confidex 2012
01-201
© Confidex 2012
2013
com www.confidex.com
© Confidex 2012
3
www.confidex.com
O
Product number
Product
For additional information and technical support contact
Confidex Ltd.
DISCLAIMER
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
IN GOOD FAITH,
THE RESULTS DESCRIBED
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
HEREIN.
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
under end
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
© Confidex 2012
www.confidex.com
ORDER INFORMATION
Product number
Product
For additional information and technical support contact
Confidex Ltd.
DISCLAIMER
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
IN GOOD FAITH,
THE RESULTS DESCRIBED
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
HEREIN.
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
under end
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
www.confidex.com
RDER INFORMATION
Product number
Product name:
For additional information and technical support contact
Confidex Ltd.
DISCLAIMER
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
IN GOOD FAITH,
THE RESULTS DESCRIBED
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
under end-use conditions.
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
www.confidex.com
RDER INFORMATION
Product number
name:
For additional information and technical support contact
Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
IN GOOD FAITH, CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
THE RESULTS DESCRIBED
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
use conditions.
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
www.confidex.com
RDER INFORMATION
Product number
name: Confidex
For additional information and technical support contact
Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
THE RESULTS DESCRIBED HEREIN WILL BE OBTAINED UNDER END
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
use conditions.
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
RDER INFORMATION
Product number: 3000574
Confidex
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
use conditions. Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
RDER INFORMATION
3000574
Confidex
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
RDER INFORMATION
3000574
Confidex Carrier Micro
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
RDER INFORMATION
3000574
Carrier Micro
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
Carrier Micro
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
Carrier Micro
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
Carrier MicroTM
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
TM NXP G2iL
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END-USE CONDIT
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
NXP G2iL
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDIT
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO EVENT BE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
NXP G2iL
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
EVENT BE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
NXP G2iL
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
IONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
EVENT BE RESP
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
IONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
RESPONSIBLE
DESCRIBED
Each user bears full responsibility for making its own determination as to the suitability of
advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
IONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
ONSIBLE
DESCRIBED
Each user bears full responsibility for making its own determination as to the suitability of
advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
For additional information and technical support contact
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
IONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
ONSIBLE
DESCRIBED
Each user bears full responsibility for making its own determination as to the suitability of
advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
Authorized Reseller: RFID4UStorewww.rfid4ustore.com [email protected]