Product Specifications - Wolf Home Products addition to being certified with the Kitchen Cabinet Manufacturers Association ... 1/2” plywood with matching exterior laminate ... (formula:

Product Specifications

March 2012

WOLF CLASSIC CABINETS

FINISH PROCESS

Page 1 800-234-WOLF (9653) Subject to change without notice - 3/1/12

Exceptional Style, Exceptional Value

WOLF Classic Cabinets proudly offers eight of today’s most popular door style/finish combinations at extremely attractive

price points, including no up charges for the upscale look of paints and glazes. With a broad selection of SKUs,

accessories and moldings, WOLF Classic Cabinets will make your design as beautiful as it is affordable.

Quality is in the Details

WOLF Classic Cabinets are proudly made in the USA, factory-assembled from hand selected American Maple without

cams, brackets or clips. All drawer boxes are dovetailed for strength at no additional charge. In addition, our finishes are

machine-applied using the latest technology to ensure a smooth, even look. Corrugated packaging is securely strapped,

fully encasing your product and assuring safe arrival without damage.

Speed and Reliability

Because WOLF Classic Cabinets are manufactured domestically, there’s no need to worry about disrupted supply,

delayed containers or other issues common among similarly priced products. You won’t need to carry a large inventory

or buy extra product as a failsafe. With every SKU in stock at our Pennsylvania Distribution Center, your order is

available to ship on your next scheduled delivery.

Certified Stewards of the Environment

In addition to being certified with the Kitchen Cabinet Manufacturers Association (KCMA), WOLF products also meet

the goals of the KCMA’s Environmental Stewardship Program (ESP). Participants in the program are held to strict

requirements in support of responsible forest management that promotes sustainability and long-term economic and

environmental benefit. This responsibility includes recycling our saw dust, using low VOC finishes and CARB

approved plywood.

Whether you’re looking for style, quality, affordability – or all three – look no further than WOLF Classic Cabinets.

1. All surfaces are machine sanded

2. Dust particles are removed before entering each

spray machine

3. Product enters an automated finish system where

solvent-based pigment stain is applied

4. Product is sealed and put through a pre-cure

drying process

5. Complete cure is done with slow bake process

6. All edges of parts are hand sanded before put

in a brush sanding machine

7. Final topcoat is applied and put through a pre-cure

process followed by slow bake for final, thorough curing

8. Clear finishes are catalyzed varnish & Paint finishes are

a pre-catalyzed varnish

9. Products are inspected for defects, cleanliness

and smoothness

10. The front side of the products gets a stain coat,

a sealer coat and final top coat. The backs of drawer

front and doors get a stain coat and a sealer coat.

Naturally occurring wood characteristics such as variations in color, grain, mineral streaks and knots are not considered defects. Color variations are a natural occurrence due to species, age, character of cabinets, and exposure to UV light and sunlight. Such variations and changes are not considered defects. For these reasons, new and/or replacement cabinets may not match display samples and/or existing cabinets. Warping is the bending or twisting of a part. To measure a door or shelf, lay the product on a flat surface and measure the gap from the surface to the part. The standard allowable tolerance for wood is 1/8” per lineal foot. Materials that fall within specification are considered acceptable, as a part of the natural characteristics of wood.

WOOD CHARACTERISTICS & VARIATIONS

CABINET SPECIFICATIONS

Half-depth adjustable shelf of 3/4” plywood with bull nosed, foil covered front edges. The shelves are held in place with a self-locking clips on the sides.

Cabinet fronts are made from 3/4” solid maple wood. Front stiles are pocket drilled and assembled with 1-1/4” screws for rugged durability.

Side panels – 1/2” plywood with matching exterior laminate – glued and stapled in a 1/2” dado in the cabinet’s front frame.

Back panels – made from vinyl covered (inside only) 1/2” plywood – are glued and nailed in a 1/2” dado and stapled to the hang rail and cabinet bottom.

All wood 3/4” corner blocks are installed on all corners.

BASE CABINETS

Cabinet fronts are made from 3/4” solid wood. Front stiles are pocket drilled and assembled with 1-1/4” screws for rugged durability.

Side panels – 1/2” plywood with matching exterior laminate – glued and stapled in a 1/2” dado in the cabinet’s front frame.

Back panels – made from vinyl covered (inside only) 1/2” plywood – are glued and nailed in a 1/2” dado and stapled to the cabinet tops and bottom. Plywood hanging rails are installed at both the top and bottom of the cabinet.

Adjustable 3/4” plywood shelf with bull nosed, foil covered front edges. The shelves are held in place with a self-locking clips on the sides.

WALL CABINETS

FINISH, DRAWERS & HINGES

All drawers are constructed using 5/8” clear finished solid wood with dovetail construction. Drawer bottom is 1/4” plywood in a dado into drawer sides.

Saginaw: Side mount, standard glides

Dartmouth & Hudson: Full extension, under mount glides

Saginaw: Hidden, six-way adjustable hinge

Dartmouth & Hudson: Hidden, six-way adjustable hinge with installed snap on soft-closing mechanism All cabinets come right hand hinged unless specified otherwise.

Adjustable 3/4” plywood shelf with bull nosed, foil covered front edges. The shelves are held in place with a self-locking clips on the sides.

All cabinet front and door surfaces receive stain and a catalyzed clear finish. Our finish provides a deep, rich wood tone that is resistant to household chemicals, water, food stains and mild acids.


DOOR STYLES


SAGINAW

Raised Panel Standard Overlay

All Maple Wood Dovetailed Drawer

Side-mount Glides Veneer Center Panel

Available in

Crimson & Honey

DARTMOUTH

Shaker Full Overlay


Soft-close Door/Drawer Full Extension, Undermount Glides

Recess Center Panel

Available in Crimson, Honey

and Painted White

HUDSON

Pillow with Miter Full Overlay


Soft-close Door/Drawer Full Extension, Undermount Glides

Solid Wood Center Panel

Available in Crimson w/Chocolate Glaze,

Heritage Brown w/ Chocolate Glaze Antique White Paint

WALL CABINETS


18” WALL CABINET Cubes

W2418 * 5

W3018 4

W3318 5

W3618 5

12” deep; double doors; no shelf; butt doors * These sizes come as single door.

12

18

24” WALL CABINET Cubes

W2124 * 4

W2424 * 4

W2724 5

W3024 5

12” deep; double doors; one shelf; butt doors * These sizes come as single door.

24

12

12” WALL CABINET

12

12

Cubes

W3012 3

W3312 3

W3612 3

12” deep; double doors; no shelf; butt doors

15” WALL CABINET

15

12

Cubes

W2115 * 3

W2415 * 3

W3015 4

W3315 4

W3615 4

12” deep; double doors; no shelf; butt doors * These sizes come as single door.

Cubes

W2730 6

W3030 7

W3330 7

W3630 8

W4230 ** 9

12” deep; double doors; two adjustable shelves; all have butt doors EXCEPT 4230.

30

12

Cubes

W0936 3

W1236 3

W1536 4

W1836 5

W2136 6

W2436 6

36” SINGLE DOOR WALL CABINET

12” deep; single door; three adjustable shelves

36

12

30” DOUBLE DOOR WALL CABINET

30

12

Cubes

W0930 2

W1230 3

W1530 4

W1830 4

W2130 5

W2430 5


12” deep; single door; two adjustable shelves W0930 Hudson only -- center panel is recessed due to size limitations

24” DEEP REFRIGERATOR WALL CABINET

Cubes

RW3312 6

RW3612 6

RW3318 9

RW3618 9

RW3324 11

RW3624 12

RW3924 ** 13

24” deep; double doors; all have butt doors EXCEPT 3924. **3924 has stationary exposed stile between doors.

24

12

WALL CABINETS

Cubes

W2736 7

W3036 8

W3336 9

W3636 9

W4236 ** 11

12” deep; double doors; three adjustable shelves; all have butt doors EXCEPT 4236. **4236 has stationary exposed stile between doors

36

12

Cubes

W0942 3

W1242 4

W1542 5

W1842 6

W2142 7

W2442 7



12” deep; single door; three adjustable shelves

Cubes

W2742 8

W3042 9

W3342 10

W3642 11

W4242 ** 13

12” deep; double doors; three adjustable shelves; all have butt doors EXCEPT 4242. **4242 has stationary exposed stile between doors.



Cubes

WDC2430 10

WDC2436 12

WDC2442 14

WMDC2430 10

WMDC2436 12

WMDC2442 14

12” deep; single door; two adjustable shelves. 36” and 42” cabinets come with three shelves. Dartmouth & Hudson styles: soft close mechanism is a screw-on piece attached to the frame. WMDC: Interior finished to match -- GLASS IS NOT INCLUDED -- see below for glass size needed. *For exact fit, measure opening before ordering glass.

DIAGONAL WALL CABINET STANDARD & DOOR PREPPED FOR GLASS

24

24 24

12

WALL CABINET DOOR PREPPED FOR GLASS

42

12

42

12

Saginaw - Standard Overlay

WMDC2430 -- 10.375 x 24.375 WMDC2436 -- 10.375 x 30.375 WMDC2442 -- 10.375 x 36.375

Dartmouth & Hudson - Full Overlay

WMDC2430 -- 9.0625 x 25.125 WMDC2436 -- 9.0625 x 31.125 WMDC2442 -- 9.0625 x 37.12

Saginaw & Hudson Includes center mullions

Dartmouth Due to style limitations, does NOT include center mullions

Cubes

WMD1530 4

WMD1830 4

WMD1536 4

WMD1836 5

WMD1542 5

WMD1842 6

30 36 42

12

Interior finished to match; 90° flat-front shelves edge banded to match interior

GLASS IS NOT INCLUDED -- see below for glass size needed. *For exact fit, be sure to measure opening before ordering glass.

Saginaw & Hudson Includes center mullions Dartmouth Due to style limitations, does NOT include center mullions


WMD1530 -- 9.375 x 24.375 WMD1830 -- 12.375 x 24.375 WMD1536 -- 9.375 x 30.375

WMD1836 -- 12.375 x 30.375 WMD1542 -- 9.375 x 36.375 WMD1842 -- 12.375 x 36.375


WMD1530 -- 9.625 x 25.125 WMD1830 -- 12.625 x 25.125 WMD1536 -- 9.625 x 31.125

WMD1836 -- 12.625 x 31.125 WMD1542 -- 9.625 x 37.125 WMD1842 -- 12.625 x 37.125

A. Upper door opening: 8” high B. Microwave opening: 17”high x 28 7/8” wide C. Microwave shelf: 14” deep (shipped loose) D. Microwave interior is finished to match exterior

Cubes

WEC1230 3

WEC1236 3

WEC1242 4

MWC3030 7

SPECIALTY WALL CABINET

Wall End Cabinet - WEC

Microwave Cabinet - MWC

30

12

A

B C

D

30 36 42

12

11.5 11.5

WALL CABINETS

30” - 36” - 42” WALL CORNER CABINET

12” deep; single door; two shelves; blind cabinets can be pulled 3” 36” and 42” cabinets come with three shelves. 42” cabinets have double doors.

Cubes

WC2430 5

WC3030 7

WC3630 8

WC4230 9

WC3036 9

WC3636 9

WC4236 12

WC3042 9

WC3642 11

WC4242 12

12

30 36 42

Wall Corner - WC

Blind opening = 6” on ALL sizes

KEY

A: Minimum pull for Square Corner cabinets. (formula: depth of cabinets on opposing wall (blind door opening + outside cabinet stile + 3/4” for functionality) B: Maximum pull for Square Corner cabinets. (formula: depth of cabinets on opposing wall (blind door opening (- minus) outside cabinet pull) C: Minimum filler size required between cabinets. Minimum pull figured when Square Corner Base/Wall or adjacent cabinet doors can open 90 degrees.

BLIND CABINET

WA

LL ADJACENT

CABINET

B

A

C

(two doors)

(two doors)

(two doors)

SAGINAW

Actual

Cabinet Width

Door Width

Blind Door Opening

Center

Stile Width

Outside Cabinet

Stile

Depth of cabinets on the

opposing wall

A. Minimum

Pull (cabinet face frame from wall)

B. Maximum

Pull (cabinet

face frame from wall)

C. Minimum

Filler Required

C. Minimum Filler with

1-1/2” hardware*

WC2430 23" 9” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"

WC3030, 3036, 3042 29" 15” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"

WC3630, 3636, 3642 35" 21” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"

WC4230, 4236, 4242 41" 12.5” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"

DARTMOUTH & HUDSON

Actual

Cabinet Width

Door Width

Blind Door Opening

Center

Stile Width

Outside Cabinet

Stile


opposing wall

A. Minimum

Pull (cabinet


B. Maximum

Pull (cabinet


C. Minimum

Filler Required


1-1/2” hardware*

WC2430 23" 10.5” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"

WC3030, 3036, 3042 29" 16.5” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"

WC3630, 3636, 3642 35" 22.5” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"

WC4230, 4236, 4242 41" 14” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"

* dimension may change when using larger hardware


BASE CABINETS

BASE CORNER CABINETS Cubes

LS36 26

BER33 18

BER36 26

BC36 18

BC42 21

BC48 23

24” deep; single door BER: 2 adjustable shelves BC: 1 adjustable shelf; can be pulled 3” BER33 & BER36 Hudson only -- center panel is recessed due to size limitations

26 26 29 29

BER33 BER36

18 18

18 18

Easy Reach - BER Lazy Susan - LS

34½

34

24

Base Corner - BC36 Stile: 6’ Blind opening = 9”

34½

24

Base Corner - BC42 Stile: 6’ Blind opening = 13 1/2”

34½

24

Base Corner - BC48 Stile: 6’ Blind opening = 19 1/2”

34½

18

KEY

A: Minimum pull for Square Corner cabinets. (formula: depth of cabinets on opposing wall (blind door opening + outside cabinet stile + 3/4” for functionality) B: Maximum pull for Square Corner cabinets. (formula: depth of cabinets on opposing wall (blind door opening (- minus) outside cabinet pull) C: Minimum filler size required between cabinets. Minimum pull figured when Square Corner Base/Wall or adjacent cabinet doors can open 90 degrees.

* dimension may change when using larger hardware

BLIND CABINET

WA

LL ADJACENT

CABINET

B

A

C

Dartmouth & Hudson: BC doors are standard overlay

SAGINAW

Actual

Cabinet Width

Door Width

Blind Door

Opening

Center

Stile Width

Outside Cabinet

Stile


opposing wall

A. Minimum

Pull (cabinet


B. Maximum

Pull (cabinet face frame from wall)

C. Minimum

Filler Required


1-1/2” hardware*

BC36 27" 10” 9” 6” 1.5” 24” 12.75 13.5" 1/2" 2"

BC42 36" 14.5” 13.5” 6” 1.5” 24” 8.25” 9" 1/2" 2"

BC48 48" 20.5” 19.5” 6” 1.5” 24” 2.25 3" 1/2" 2"

DARTMOUTH & HUDSON

Actual

Cabinet Width

Door Width

Blind Door Opening

Center

Stile Width

Outside Cabinet

Stile


opposing wall

A. Minimum

Pull (cabinet


B. Maximum

Pull (cabinet


C. Minimum

Filler Required


1-1/2” hardware*

BC36 27" 10” 9” 6” 1.5” 24” 12.75 13.5" 1" 2.5"

BC42 36" 14.5” 13.5” 6” 1.5” 24” 8.25” 9" 1" 2.5"

BC48 48" 20.5” 19.5” 6” 1.5” 24” 2.25 3" 1" 2.5"


BASE CABINETS

24” deep; three drawers. NOTE: Hudson comes with recessed panel top drawer and raised panel bottom drawers.

34½

24

SINGLE DOOR BASE CABINET

24” deep; single door, one drawer EXCEPT B09. * B09 has full height door and no drawer. B09 Hudson only -- center panel is recessed due to size limitations

Cubes

B09 * 5

B12 6

B15 8

B18 9

B21 11

B24 12

DOUBLE DOOR

24” deep; double doors, one drawer; butt doors EXCEPT B42. **B42 has two drawers and a stationary exposed stile between doors.

Cubes

B27 13

B30 15

B33 16

B36 18

B42 ** 21

34½

24

Cubes

DB12 6

DB15 8

DB18 9

DB21 11

DB24 12

DB30 15

DB36 18

DRAWER BASE CABINET

34½

24

SINK BASE CABINET

24” deep; double doors, no drawers; * SB24 has single door; rest have butt doors EXCEPT SB42. **SB42 has stationary exposed stile between doors and two false fronts.

Cubes

SB24 * 12

SB27 13

SB30 15

SB33 16

SB36 18

SB39 19

SB42 ** 21

34½

24

CORNER SINK BASE CABINET

24” deep; single door. SCB: full cabinet SCBFF: face frame and floor only

Cubes

SCB36 26

SCB33FF 1

SCB36FF 1 34

24

SPECIALTY BASE Cubes

BEC12 L 6

BEC12 R 6

BWB18 9

Base end choose right or left hand; BWB includes 2 white 35 quart trash cans BEC drawer head is stationary

Base End

Cabinet

34½

12

34½

24

Waste Basket

Cabinet


TALL CABINETS VANITY CABINETS


UTILITY CABINET

84 90 96

24

Cubes

U1884 21

U1890 23

U1896 24

U2484 28

U2490 30

U2496 32

24” deep; includes one shelf between doors. Unfinished toekick is installed on all units.

Cubes

SHELFKIT1824 1

SHELFKIT2424 1

Shelf kits include four shelves and clips. WOLFCS: style 001

Cubes

OC3384 39

OC3390 42

OC3396 44

OVEN CABINET

Oven Opening - 24” high x 27” wide; Drawers may be removed and cut out to create a Double Oven opening. Oven cabinet has a 3” left and right stile running the entire height of the cabinet. As a result, Dartmouth and Hudson doors and drawers are not full overlay. See cabinet specs on e-Toolbox for further detail. Cabinet Openings: OC3384: 18-3/4 x 27 OC3390: 24-3/4 x 27 OC3396: 30-3/4 x 27 NO Shelves in upper cabinet

84 90 96

24

PULL OUT SHELF FOR BASE & TALL

Cubes

POS12 1

POS15 1

POS18 1

POS21 1

POS24 1

POS27 1

POS30 1

POS33 1

POS36 1

Single drawer; solid wood dovetail construction -- FIELD INSTALLED WOLFCS: style 000

Overall height -- 2¼” Inside height -- 1½”

Pull out shelf includes dove tailed drawer box with side mounted epoxy glides, front spacer, and screws for installation

Cubes

VSB24 * 11

VSB27 12

VSB30 13

VSB33 14

VSB36 16

VSB48 ** 21

VSB1816 6

VSB2418 * 9

VSB3018 11

VANITY SINK BASE CABINET

21” deep; double doors; no drawer; butt doors * This size comes with single door. ** VSB48 comes with 2 false fronts.

34½

21

VANITY BASE CABINET Cubes

VB15 7

VB18 8

21” deep; single door; one drawer. 34½

21

Cubes

VDB12 6

VDB15 7

VDB18 8

VANITY DRAWER BASE CABINET

21” deep; four drawers.

21

34½

Cubes

VDT36 3

UNDERMOUNT DRAWER

21” deep; undermount drawer; trimmable to 24” wide.

21

36

6-3/8” 4-1/4”

ACCESSORIES


24

30 8

Standard Hood - HOOD Includes BROAN 250CFM Ventilation Module

24

30 8

Hood w/Trim- HOODT Includes BROAN 250CFM Ventilation Module

Decorative rail ships loose. Hood may be used with or without rail.

6

12

Organizer - ORG36 12” Deep; 6” high; matching interior

36

18

30 12

Wine Rack - WR30 12” Deep; 18” high; matching interior

30

18

Plate Rack - PR30 12” Deep; 18” high; matching interior

12

8

8

Bar Bracket

Some items are not designed to hold glazing. In these cases, the item will not have visible decorative glazing .

ACCESSORIES & HOODS

Cubes

PR30 4

WR30 4

ORG36 2

BARBRACKET 0.5

HOOD 4

HOODT 4

Cubes

FF330 * 1

FF630 * 1

FWF336 1

FWF636 1

FWF342 1

FWF642 1

FF396 1

FF696 1

FLUTED FILLER Cubes

F330 * 1

F630 * 1

WF336 1

WF636 1

WF342 1

WF642 1

F396 1

F696 1

STANDARD FILLER

F330 & F630 may be used for either bases or 30” walls. Flutes begin 1-3/4” from each end of the filler. All fillers are 3/4” thick. Some items are not designed to hold glazing. In these cases, the item will not have visible decorative glazing .

SPICE RACK PULL OUTS

Plain Front Cubes

WPOP3x30 1

WPOP3x36 1

WPOP3x42 1

BPOP3x30 2

Fluted Front

WPOF3x30 1

WPOF3x36 1

WPOF3x42 1

BPOF3x30 2

3

Wall: 30 36 42

Base:

30

Fluted Front

3

Wall: 30 36 42

Base:

30

Plain Front

Includes field-applied filler. This item must be installed between two cabinets.

Cubes

V549RA 0.25

V549ST 0.25

V573RA 0.25

V573ST 0.25

VALANCE

Some items are not designed to hold glazing. In these cases , the item will not have visible decorative glazing . All valances are 3/4” thick.

5

49 73

Straight Valance

Roman Arch Valance

5

49 73

6.25

6.25

Includes field-applied filler. This item must be installed between two cabinets.


PANELS

Cubes

P4836 1 Finished End Panel -- 48” x 36” x 1/4” (grain runs with 36”)

P4896 1 Finished End Panel -- 48” x 96” x 1/4” (grain runs with 96”)

BP4896 1 Finished Beaded Panel -- 48” x 96” x 1/4” (not available with Glaze) (bead runs with 96”)

REFP24 ** 2 Finished Refrigerator Panel -- 24” x 96” with 1-1/2” stile -- 1/2” vinyl laminate panel

REFP30 ** 3 Finished Refrigerator Panel -- 30” x 96” with 1-1/2” stile -- 1/2” vinyl laminate panel

DWP3 ** 2 Dishwasher End Panel with 3” filler -- 24” , 34-1/2” with 3” stile -- 1/2” vinyl laminate panel

DWP6 ** 3 Dishwasher End Panel with 6” filler -- 24” x 34-1/2” tall with 6” stile -- 1/2” vinyl laminate panel

SEP ** 2 Sink End Panel -- 12” x 30” with 1-1/2” stile -- 1/2” vinyl laminate panel

PANELS

= Some items are not designed to hold glazing. In these cases, the item will not have visible decorative glazing . *

N/A = Order standard Crimson for this item

** Panels are finished to match with vinyl laminate on “face” side only Inner side finished in natural vinyl laminate on stained products Inner side finished in white vinyl laminate on painted products

DECORATIVE END PANELS

Cubes

DWEP30 2 Decorative End Panel for 30” Wall Cabinet



DEPVB 2 Decorative End Panel for Vanity Base Cabinet

DEPB 2 Decorative End Panel for Base Cabinet


DWEP30 -10 x 28 DWEP36 -10 x 34 DWEP42 -10 x 40 DEPVB - 19 x 28 DEPB - 22 x 28


DWEP30 -11 ¼ x 30 DWEP36 -11 ¼ x 36 DWEP42 -11 ¼ x 42 DEPVB - 20 ¼ x 29 DEPB - 23 ¼ x 29

MOULDINGS

MOULDING

Some items are not designed to hold glazing. In these cases, the item will not have visible decorative glazing.

2-1/4” SMCROWN214 2-1/4” Crown; 8 foot long pieces; sold by the piece

2-1/4” SSMCROWN214 -- for full overlay 2-1/4” Full Overlay Crown. Seated on top of cabinet with 3/8” top nailing flange; 8 foot long pieces; sold by the piece

3/4” MLR Light Rail; 8 foot long pieces; sold by the piece

MQR Quarter Round; 8 foot long pieces; sold by the piece

MOCW Outside Corner; 8 foot long pieces; sold by the piece

3/4” MBAT Batten; 8 foot long pieces; sold by the piece

MICW Inside Corner; 8 foot long pieces; sold by the piece

3/4” MROPE Rope Inlay; 8 foot long pieces; sold by the piece

5/8”

MDENTIL Dentil Inlay; 8 foot long pieces; sold by the piece

3” ROS3 3” Rosette; sold individually

6” ROS6 6” Rosette; sold individually

4-1/2” FB 4-1/2” Furniture Base; 8 foot long pieces; sold by the piece

4-1/2” TOEKICK 4-1/2” Toekick; 8 foot long pieces; sold by the piece ; matching vinyl paper finish

SLGCROWN4 -- for full overlay 4” Full Overlay Crown. Seated on top of cabinet with 3/8” top nailing flange; 8 foot long pieces; sold by the piece

4” LGCROWN4 4” Crown; 8 foot long pieces; sold by the piece

4”

CCROWN134 1-3/4” Cove Crown; 8 foot long pieces; sold by the piece

1-3/4” 3/4” MSW Scribe; 8 foot long pieces; sold by the piece



WOLF Classic Cabinets Five-Year Limited Warranty WOLF Classic Cabinets have been manufactured under the highest standards of quality and workmanship.

FIVE-Year Limited Warranty on Cabinets, Drawer Guides and Hinges

WOLF warrants to original consumer purchasers for five years from date of original purchase that cabinets, drawer, drawer guides and hinges used in the manufacture of WOLF Classic Cabinets shall be free from defects in material and workmanship under normal use.

General Warranty Guidelines

Should WOLF Classic Cabinets fail during the applicable warranty period due to defects in the material or workmanship under normal use, WOLF, in its discretion, will repair or provide the parts necessary to replace the defective products.

This warranty is only applicable to products used in residential applications in the United States and is not transferable.

This warranty does not cover products that are misused, abused, mishandled, improperly installed, improperly stored, changed, modified or subject to extreme temperatures or extreme moisture levels, or normal wear and tear. This warranty is not valid for products used for any purpose other than the purpose for which they were originally intended. This warranty does not cover the cost of installation, removal, subsequent damage or transportation of the defective product, regardless of whether the work was performed by a contractor, service company or the consumer.

Variations in color and grain pattern are a natural characteristic of wood. Color changes also may result from exposure to light, heat, smoke, household cleaners, and other elements and environmental conditions that are part of the aging process. These material variations and changes are not covered by this warranty. WOLF reserves the right to substitute discontinued product with the most similar product in styling, wood species and color available at the time a claim is submitted.

Paint finishes are uniquely different from standard wood finishes. On all wood products, expansion and contraction are typical due to changes in climate conditions. Due to this normal movement, paint finishes may develop slight separation lines, finish breaks and seam lines. With use of selected hardwoods and veneers, some grain pattern and wood characteristics (checks, pin knots) as well as seams and joints will remain visible through the paint finish. Over time, there may be a slight color shift, due to exposure to natural and artificial light. These normal conditions are not considered quality defects and are not covered by this warranty.

THIS WARRANTY IS THE EXCLUSIVE WARRANTY OF WOLF AND IS IN LIEU OF AND WOLF DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state.

To submit a claim under this warranty, contact your nearest WOLF Classic Cabinets dealer or send a letter explaining the defect along with photos and a dated sales receipt as proof of purchase to the address below.

WARRANTY

WOLF Classic Cabinets • Attn: Warranty Claims 3400 West Market Street • York, PA 17404

ph: 800-234-9653 • fx: 717-792-4052

[email protected]

WCCSpcOnly V1 3-2012

Documents

Product Specifications - Wolf Home Products addition to being certified with the Kitchen Cabinet Manufacturers Association ... 1/2” plywood with matching exterior laminate ... (formula: